i have micromax a116 canvas hd........
and after i flash a custom rom the blutooth and wifi not working......
and i have not taken backup of my previous stock rom
i again flash stock rom via SP tool but problem are still.....
And phone status show
WLAN MAC ADDRESS unavilable
Blutooth Address unavilable
IP Address unavilable
plzz help ...........
sumitk800 said:
i have micromax a116 canvas hd........
and after i flash a custom rom the blutooth and wifi not working......
and i have not taken backup of my previous stock rom
i again flash stock rom via SP tool but problem are still.....
And phone status show
WLAN MAC ADDRESS unavilable
Blutooth Address unavilable
IP Address unavilable
plzz help ...........
Click to expand...
Click to collapse
Root the phone. Install Custom recovery. and then flash the latest stock 4.2 official firmware. it's all here in my thread.
http://forum.xda-developers.com/showthread.php?t=2292971
when you install the firmware, make sure you / Factory Reset / Clear Dalvik cache / and Format System / before installing the firmware. Good luck.
wifi not turning on
salaigeethan666 said:
Root the phone. Install Custom recovery. and then flash the latest stock 4.2 official firmware. it's all here in my thread.
http://forum.xda-developers.com/showthread.php?t=2292971
when you install the firmware, make sure you / Factory Reset / Clear Dalvik cache / and Format System / before installing the firmware. Good luck.
Click to expand...
Click to collapse
installed stock firmware then also wifi is not turning on please help..
Same problem bro i forgot about backup nd now my wifi is not working.
Related
hi everyone
i flashed stock 4.1.2 DDLS3 firmware via odin. (no root)
I rooted my s2 i9100g by http://forum.xda-developers.com/showthread.php?t=2065581 .
1. flashed SU-BB-Installer.zip for root
2. flashed B_Safe_Kernel_DDLS3_TWRP.zip: for cwm
Done sucessfully.
3. flashed SU-BB-Unstaller.zip for unroot
4. again flashed SU-BB-Installer.zip for root
(last two steps since I want to take it to service center for some speakers problem)
Now I am rooted twrp recovery. But could not install any rom with twrp/temp_cwm. Even i clicked usb debugging but when i connect it to pc it shows only "connected as a media device" no usb debugging connected messege. And I tried to flash stock firmware again via odin--> it showed added then some progress then pass . phone rebooted but no new stock firmware(still with same last system, settings, apps).
Any one please help. root checker apps says rooted successfully.
Hi,
don´t understand you quiet well. If you have this kernel: http://forum.xda-developers.com/showthread.php?t=2293576 then you have a custom recovery and install (flash) new roms via cwm (install zip from...).
Du you flash one-part firmwares via odin? Try after flashing a factory reset in the recovery.
Andi
andi2398 said:
Hi,
don´t understand you quiet well. If you have this kernel: http://forum.xda-developers.com/showthread.php?t=2293576 then you have a custom recovery and install (flash) new roms via cwm (install zip from...).
Du you flash one-part firmwares via odin? Try after flashing a factory reset in the recovery.
Andi
Click to expand...
Click to collapse
Yes I am with the same kernel but whenever i tried to flash a new rom via recovery mod it gives status 7 error and says md5 file not found type thing. I did full data wipe but still same error. I think my USB debugging is not on even I checked it. May it a problem for flashing rom via recovery. I tried to flash again stock DDLS3 firmware via odin, it seems that odin did his work fine(it shows phone added+someprocess+pass) but phone is still with old system.
andi2398 said:
Hi,
Du you flash one-part firmwares via odin? Try after flashing a factory reset in the recovery.
Andi
Click to expand...
Click to collapse
I flashed stock I9100GDDLS3_I9100GODDLS3_INU.zip [India] from http://forum.xda-developers.com/showthread.php?t=2199288
I flashed only firmware no modem,kernel, bootloader etc. Are the others are necessary.
sorry for saying all roms
I can install other roms but MIUI v5 http://forum.xda-developers.com/showthread.php?t=2401232
I tried ICS_xd rom. flashed successful. But getting STSTUS 7 error for miui roms
Any help?
Is there any other way to flash miui rom.
Hi,
Status 7 is a kernel problem, so maybe your kernel isnt compatibl with miui.
Tried this on: http://forum.xda-developers.com/showthread.php?t=1605655 ?
Andi
andi2398 said:
Hi,
Status 7 is a kernel problem, so maybe your kernel isnt compatibl with miui.
Tried this on: http://forum.xda-developers.com/showthread.php?t=1605655 ?
Andi
Click to expand...
Click to collapse
I am with s2 i9100g not i9100. So i think that may not work here. I have asked in miui rom section and they suggest some change in rom.zip file. May be that help. BTW thanks for the help.
done
get solved with xda members help. THANKS A LOT!!!!
First i repartion my lenovo p780 4gb with help of following thread
http://forum.xda-developers.com/lenovo-p780/general/p780-repartition-storage-t2668744
My device storage got reparation into 3 gb and 500 mb format.
After that i tried to install vibe rom from needrom via cwm recovery.
So now because of that my mobile got stuck in boot loop it's kind of restarting every 10 sec and showing black screen !!
http://forum.xda-developers.com/lenovo-p780/development/rom-lenovo-p780-pre-rooted-official-t2553725
i am trying the above link but my device does not get detected on windows 8.
bthak said:
First i repartion my lenovo p780 4gb with help of following thread
http://forum.xda-developers.com/lenovo-p780/general/p780-repartition-storage-t2668744
My device storage got reparation into 3 gb and 500 mb format.
After that i tried to install vibe rom from needrom via cwm recovery.
So now because of that my mobile got stuck in boot loop it's kind of restarting every 10 sec and showing black screen !!
http://forum.xda-developers.com/lenovo-p780/development/rom-lenovo-p780-pre-rooted-official-t2553725
i am trying the above link but my device does not get detected on windows 8.
Click to expand...
Click to collapse
Hi bro, you need to switch base to China ROM (S125, S129, S135) before flashing Vibe ROM if you are on ROW ROM. Directly flash Vibe ROM will cause you end up in a bootloop and possibly corruption of /nvram.
Nevermind, to flash via SP Flash Tool, you will need to press the red button on the bottom top right side and connect the USB cable to begin flashing process.
And by flashing Vibe ROM after repartitioning will cause the partition restore to default too. (2.5GB /data, 1GB /media)
Reply this post if you need assistance.
soralz said:
Hi bro, you need to switch base to China ROM (S125, S129, S135) before flashing Vibe ROM if you are on ROW ROM. Directly flash Vibe ROM will cause you end up in a bootloop and possibly corruption of /nvram.
Nevermind, to flash via SP Flash Tool, you will need to press the red button on the bottom top right side and connect the USB cable to begin flashing process.
And by flashing Vibe ROM after repartitioning will cause the partition restore to default too. (2.5GB /data, 1GB /media)
Reply this post if you need assistance.
Click to expand...
Click to collapse
Well after lots of try i was finally able to flash my mobile with http://forum.xda-developers.com/lenovo-p780/development/rom-lenovo-p780-pre-rooted-official-t2553725
i suppose this is ur thread :
http://forum.xda-developers.com/showpost.php?p=50507891&postcount=2
can you plz guide me how and from where i can get the chinese rom ?
n won't it be in Chinese language ?
bthak said:
Well after lots of try i was finally able to flash my mobile with http://forum.xda-developers.com/lenovo-p780/development/rom-lenovo-p780-pre-rooted-official-t2553725
i suppose this is ur thread :
http://forum.xda-developers.com/showpost.php?p=50507891&postcount=2
can you plz guide me how and from where i can get the chinese rom ?
n won't it be in Chinese language ?
Click to expand...
Click to collapse
The one in satanduck thread: P780_S135_130917_rooted_twrp_gapps.7z is a China based S135 ROM and flashable via SP Flash Tool ROM. After you flash it then you can flash Vibe ROM. Remember do a wipe after flashing the Vibe ROM.
soralz said:
The one in satanduck thread: P780_S135_130917_rooted_twrp_gapps.7z is a China based S135 ROM and flashable via SP Flash Tool ROM. After you flash it then you can flash Vibe ROM. Remember do a wipe after flashing the Vibe ROM.
Click to expand...
Click to collapse
Well after flashing the chinese rom and then the vibe rom..
If i want to use another custom rom from needrom web do i hve to repeat the same procedure or just go into recovery n install zip..?
bthak said:
Well after flashing the chinese rom and then the vibe rom..
If i want to use another custom rom from needrom web do i hve to repeat the same procedure or just go into recovery n install zip..?
Click to expand...
Click to collapse
Just install the zip, because you are on chinese ROM base already.
hey hi ,
i hav canvas hd a116 , i rooted it then installed fonts , after the restart the phone got stuck at the boot screen
i did a hard reset but still no change, i forgot to install custom recovery and i just have a stock recovery..
please do help...
i read some posts and i think installing the stock rom through stock recovery might work
please guide me through it if possible...
dr. sunny said:
hey hi ,
i hav canvas hd a116 , i rooted it then installed fonts , after the restart the phone got stuck at the boot screen
i did a hard reset but still no change, i forgot to install custom recovery and i just have a stock recovery..
please do help...
i read some posts and i think installing the stock rom through stock recovery might work
please guide me through it if possible...
Click to expand...
Click to collapse
Try dng a factory reset
Nd try flashing the custom recovery using sp tools Nd thn install a custom rom
The last alternative ll be to flash the stock rom using sp tools
Sent from my Micromax A116 using XDA Premium 4 mobile app
bro, just install custom recovery by flash tools and then flash stock based rom by chmahendra..... ... cool rom
i cant use my phone
i download miui 4.5.28 in my external sd card and i wipe data via CWM recovery.but i cant able to update new rom via external sd card ,i dont have any back up my old rom.what can i do ...pls help me .............
Format your phone using sp tools
athulvishal009 said:
i download miui 4.5.28 in my external sd card and i wipe data via CWM recovery.but i cant able to update new rom via external sd card ,i dont have any back up my old rom.what can i do ...pls help me .............
Click to expand...
Click to collapse
Then install stock rom using sp tools
while new installing the rom when complete it stuck on boot logo :crying::crying:
device -a116
custom recovery -t w r p 2.7.0
Don't you made the backup??
rane1810 said:
while new installing the rom when complete it stuck on boot logo :crying::crying:
device -a116
custom recovery -t w r p 2.7.0
Click to expand...
Click to collapse
problem solved? or stil there?
saurabhsunil said:
problem solved? or stil there?
Click to expand...
Click to collapse
Yeah it solved :good:
rane1810 said:
Yeah it solved :good:
Click to expand...
Click to collapse
Great...:good:
Just add 'solved' in your thread title....also write how u solved it...it will help others...
boot logo problem
rane1810 said:
while new installing the rom when complete it stuck on boot logo :crying::crying:
device -a116
custom recovery -t w r p 2.7.0
Click to expand...
Click to collapse
rane1810 said:
Yeah it solved :good:
Click to expand...
Click to collapse
Hi, can you tell me how yo solve the problem ? I'm having the same problem since i tried to install 4.4 kitkat ROM.. After install TWRP, i made a backup and install the new ROM. But when i do "reboot system" , the phone stuck always in the TWRP ...
I´m without phone since wednesday, and i don´t know what to do..
Help me please,
thank you.
Solution
pjmaia10 said:
Hi, can you tell me how yo solve the problem ? I'm having the same problem since i tried to install 4.4 kitkat ROM.. After install TWRP, i made a backup and install the new ROM. But when i do "reboot system" , the phone stuck always in the TWRP ...
I´m without phone since wednesday, and i don´t know what to do..
Help me please,
thank you.
Click to expand...
Click to collapse
Try to Wipe Delvik Cache If the problem remain the same Flash Stock rom With SP.Tool to get your phone again alive
Raj_Chandigarh said:
Try to Wipe Delvik Cache If the problem remain the same Flash Stock rom With SP.Tool to get your phone again alive
Click to expand...
Click to collapse
I already try wipe dalvik cache, but the problem remains.. Then i install the usb drivers (i supposed it was the corrects ( tried MT65xx_USB_Driver and download the A116 drivers from androidxda.com/download-micromax-usb-drivers ) and try to update de driver but without success...
the device identify is IQ451 from Fly IQ451 phone another phone that looks like the same as A116 and wiko C. Five, but the problem is that i can´t find any specific usb driver for it... And without that i cannot use SP tool to flash the stock ROM..
Any idea ?
Solution
pjmaia10 said:
I already try wipe dalvik cache, but the problem remains.. Then i install the usb drivers (i supposed it was the corrects ( tried MT65xx_USB_Driver and download the A116 drivers from androidxda.com/download-micromax-usb-drivers ) and try to update de driver but without success...
the device identify is IQ451 from Fly IQ451 phone another phone that looks like the same as A116 and wiko C. Five, but the problem is that i can´t find any specific usb driver for it... And without that i cannot use SP tool to flash the stock ROM..
Any idea ?
Click to expand...
Click to collapse
Go to Micromax Official Site and Download There a116 Drivers x65 for 64 bit operating system , x86 for 32 bit operating system . And also Make shure that during connectivity your window automatic update should be on.
So, I flashed a ROM by Baralajbi (needrom:http://www.needrom.com/download/lenovo-p780-4-4-2-vibe-ui-2-0/comment-page-2/#comments) of Vibe 2.0 UI for my Lenovo P780 4GB ROW Kitkat and now I cannot get a netwoek. There is a red cross next to network. Obviously this is a problem of modem so I downloaded some modems for my phone (http://forum.xda-developers.com/lenovo-p780/general/how-modems-t2757923) from there (link given in brackets) and flashed them using recovery (not TWRP or CWP since the rom doesnt have that but the normal Android recovery) and its saying Aborted?!!
Please help! I am new at this and Stympy has helped me quite a lot cuz he suggested the ROMs but how do I fix the no network problem? I love this ROM and want to use it
kri32ablu said:
So, I flashed a ROM by Baralajbi (needrom:http://www.needrom.com/download/lenovo-p780-4-4-2-vibe-ui-2-0/comment-page-2/#comments) of Vibe 2.0 UI for my Lenovo P780 4GB ROW Kitkat and now I cannot get a netwoek. There is a red cross next to network. Obviously this is a problem of modem so I downloaded some modems for my phone (http://forum.xda-developers.com/lenovo-p780/general/how-modems-t2757923) from there (link given in brackets) and flashed them using recovery (not TWRP or CWP since the rom doesnt have that but the normal Android recovery) and its saying Aborted?!!
Please help! I am new at this and Stympy has helped me quite a lot cuz he suggested the ROMs but how do I fix the no network problem? I love this ROM and want to use it
Click to expand...
Click to collapse
Vibe 2.0 can power on ? waiting for someone help you, i need to know too
kri32ablu said:
So, I flashed a ROM by Baralajbi (needrom:http://www.needrom.com/download/lenovo-p780-4-4-2-vibe-ui-2-0/comment-page-2/#comments) of Vibe 2.0 UI for my Lenovo P780 4GB ROW Kitkat and now I cannot get a netwoek. There is a red cross next to network. Obviously this is a problem of modem so I downloaded some modems for my phone (http://forum.xda-developers.com/lenovo-p780/general/how-modems-t2757923) from there (link given in brackets) and flashed them using recovery (not TWRP or CWP since the rom doesnt have that but the normal Android recovery) and its saying Aborted?!!
Please help! I am new at this and Stympy has helped me quite a lot cuz he suggested the ROMs but how do I fix the no network problem? I love this ROM and want to use it
Click to expand...
Click to collapse
why dont you flash TWRP or CWM via mobile uncle tool (available on playstore). follow this threade
original recovery will check MD5 and it will abort if verification fails.
kri32ablu said:
So, I flashed a ROM by Baralajbi (needrom:http://www.needrom.com/download/lenovo-p780-4-4-2-vibe-ui-2-0/comment-page-2/#comments) of Vibe 2.0 UI for my Lenovo P780 4GB ROW Kitkat and now I cannot get a netwoek. There is a red cross next to network. Obviously this is a problem of modem so I downloaded some modems for my phone (http://forum.xda-developers.com/lenovo-p780/general/how-modems-t2757923) from there (link given in brackets) and flashed them using recovery (not TWRP or CWP since the rom doesnt have that but the normal Android recovery) and its saying Aborted?!!
Please help! I am new at this and Stympy has helped me quite a lot cuz he suggested the ROMs but how do I fix the no network problem? I love this ROM and want to use it
Click to expand...
Click to collapse
happened to me once.. the problem is your IMEI i belive. Dialing *#06# showed my Invalid IMEI.. ( if that is your problem than you can just restore IMEI using "mobile uncle" assuming that you already have root in your phone..) then i need to restore my IMEI.. but that need root and i have few problems rooting in Vibe 2.0 (Doesnt root properly).. so using "SP FLASH TOOL" i flash back my old rom (JB 4.2) .... and i have back my network signal.. then doing all over again to flash back KK rom.
mistajoe83 said:
happened to me once.. the problem is your IMEI i belive. Dialing *#06# showed my Invalid IMEI.. ( if that is your problem than you can just restore IMEI using "mobile uncle" assuming that you already have root in your phone..) then i need to restore my IMEI.. but that need root and i have few problems rooting in Vibe 2.0 (Doesnt root properly).. so using "SP FLASH TOOL" i flash back my old rom (JB 4.2) .... and i have back my network signal.. then doing all over again to flash back KK rom.
Click to expand...
Click to collapse
he is having Baseband issue and is not able to flash Modem a.k.a. baseband cause he is having original recovery
NISHANTJ_2K said:
he is having Baseband issue and is not able to flash Modem a.k.a. baseband cause he is having original recovery
Click to expand...
Click to collapse
I know.. If its just baseband maybe you can just copy the modem only (make backup of the old modem in system--etc--firmware before replacing. . . I usually name it to modem.bak) using root explorer. . ive flash this rom and everything is working .. Signal is bad nd tried to change modem by the above method.
You can replace your recovery with TWRP that works properly with kitkat. download twrp an flash it using sp flash tool. Just tick recovery and untick everything else.. Double click recovery and replace with twrp recovery image. Select download. Not firmware upgrade... Tick DA DL AL... and flash.. Ive manage to change my recovery...
Here is proper tutorial.. Im not a good explainer.. Hahahhaa
http://www.theandroidhow.com/2014/06/how-to-flash-stock-custom-recovery-sp-flash-tool.html?m=0
Dont make your own scatter files like in the tutorial.. Use vibeui 2.0 scatter file
mistajoe83 said:
I know.. If its just baseband maybe you can just copy the modem only (make backup of the old modem in system--etc--firmware before replacing. . . I usually name it to modem.bak) using root explorer. . ive flash this rom and everything is working .. Signal is bad nd tried to change modem by the above method.
You can replace your recovery with TWRP that works properly with kitkat. download twrp an flash it using sp flash tool. Just tick recovery and untick everything else.. Double click recovery and replace with twrp recovery image. Select download. Not firmware upgrade... Tick DA DL AL... and flash.. Ive manage to change my recovery...
Here is proper tutorial.. Im not a good explainer.. Hahahhaa
http://www.theandroidhow.com/2014/06/how-to-flash-stock-custom-recovery-sp-flash-tool.html?m=0
Dont make your own scatter files like in the tutorial.. Use vibeui 2.0 scatter file
Click to expand...
Click to collapse
My IMEI is fine!
I just realized that (noob I am) that after installing this Vibe 2.0 ROM, i lost the root priveleges. And then I had problems with SP Flash tool too so couldnt replace the modems and such. Thanks a ton guys!
Although I am too scared to try this ROM again cuz I cant flash it because of drivers not getting detected on my laptop by the SP Flash tool. Can someone upload the rooted version of the rOM or help me in someway? I really liked Vibe 2.0 UI and want it on my phone
kri32ablu said:
My IMEI is fine!
I just realized that (noob I am) that after installing this Vibe 2.0 ROM, i lost the root priveleges. And then I had problems with SP Flash tool too so couldnt replace the modems and such. Thanks a ton guys!
Although I am too scared to try this ROM again cuz I cant flash it because of drivers not getting detected on my laptop by the SP Flash tool. Can someone upload the rooted version of the rOM or help me in someway? I really liked Vibe 2.0 UI and want it on my phone
Click to expand...
Click to collapse
Just Google it and u will find a site where u can download vibe ui 2.0 (by baraljabi)and its prerooted
Sent from my Lenovo P780 using XDA Free mobile app
kri32ablu said:
My IMEI is fine!
I just realized that (noob I am) that after installing this Vibe 2.0 ROM, i lost the root priveleges. And then I had problems with SP Flash tool too so couldnt replace the modems and such. Thanks a ton guys!
Although I am too scared to try this ROM again cuz I cant flash it because of drivers not getting detected on my laptop by the SP Flash tool. Can someone upload the rooted version of the rOM or help me in someway? I really liked Vibe 2.0 UI and want it on my phone
Click to expand...
Click to collapse
KITKAT firmware here!