Dear Friends,
I have viewsonic viewpad 70n pro and that stuck on booting (stuck on 3 birds logo). I would like to tell that, there is no volume buttons but only Reset and power buttons so i am bit confused about the hard resetting or entering into recovery mode.
I am attaching the picture of my 7" tab so you will understand about the tab which i am talking about.
Thanks in advance and excuse for my bad English
Best Regards
Xainu
Happened the same to me, but i found the solution
Xain2 said:
Dear Friends,
I have viewsonic viewpad 70n pro and that stuck on booting (stuck on 3 birds logo). I would like to tell that, there is no volume buttons but only Reset and power buttons so i am bit confused about the hard resetting or entering into recovery mode.
I am attaching the picture of my 7" tab so you will understand about the tab which i am talking about.
Thanks in advance and excuse for my bad English
Best Regards
Xainu
Click to expand...
Click to collapse
Hey Xainu, I found the solution, can u try to put a pin in the reset hole and hold like for 10seconds..and the viewsonic tablet will get reset to and will appear in japanese or chinese ..lol whatever that language is good luck .. hope it works for you:laugh:
kickace7 said:
Hey Xainu, I found the solution, can u try to put a pin in the reset hole and hold like for 10seconds..and the viewsonic tablet will get reset to and will appear in japanese or chinese ..lol whatever that language is good luck .. hope it works for you:laugh:
Click to expand...
Click to collapse
Same problem here, try resetting it the tablet shut off...power on again same problem help!!
same problem. where can i find firmware?
Related
Hi
I rooted my superpad III tablet , model very familiar to ZH10X2. I used gingerbreak and now i know it was very BIG mistake. Tablet is freezing cant unlock it, not responding, black screening, i made a factory reset in setting ( it was luck to get there). Hard reset with 3 buttons says extracting data failed, please check your zsys.img , i have no idea how heal my tablet.
i'm android noob so be gentle, i appreciate every help
sorry for my english
Hello thanks for dropping by on my thread.
Please do help me to unbrick my tablet it's Kata T2 (Fish Tablet).
I've been reading through google for 5hours unfortunately didn't had any best results.
So maybe someone here or if there are any alternative steps to unbrick my tablet that you would recommend. Please do give advice or suggestion.
The problem is I have a "lying android with red triangle logo".
Tried to wipe data & wipe cache and everytime I do a reboot the fish logo appear (default logo) and proceed again to the lying android logo. Could you help me what to do?
If you're asking for a "backup" thing. the answer is NO.I don't have those.. And you might ask for the stock ROM too .. the answer is NO..
So please help me with this.. Thanks!..
same here
i also have a problem with kata t2. i rooted it with vroot then after it rebooted. the logo comes out but after that the screen goes to black. i know its turned on because i can see the light in the lcd but the problem is it wont reboot normally. i have tried to go to recovery mode data erased it to factory setting even deleted the cache but the problem still remains it wont boot normally and stays in black screen. if somebody would help us it will greatly appreciated. :good:
PS: i ask them if they can provide a stock firmware and the answer is they cant. any tips on how can i get it to boot back to normal? the stock firmware by the way is 4.1.1 jellybean... Happy new year
just return go to the nearest service center... i have also bricked mine and said to the technician some lies (virus) . trust me they dont know that you bricked it becauese of rooting it... maybe they just dont care..
Join the Kata T2 group in facebook.. they might help you there..
hey i found a new way to unbrick your kata t2. havnt tried it yet but try it!
1. turn off your kata t2
2. press power button and volume down until kata logo (fish) comes out
3. press again power button and volume down you will see the android logo with exclamation point
4. press power button and volume UP and you will go to recovery.... there you would find recover system from back up. click on it.
Just a suggestion ^_^
Hello everyone. This is a long story, so thanks in advance to read it and try to help me.
I've got a Trekastor surftab Ventos 8.0 this one --> http://www.trekstor.de/detalles-de-surftabs/product/272.html?file=tl_files/generatedPdf/272-de.pdf
model st80208-2 . I'm not sure if it is the 8 or 16 GB. And I don't know how to check it because the tablet is bricked.
How did I brick the tab?
This is a good question. I had lost the charger and I tried with another one with a higher voltage. This ruined the batery. And when I found the charger the tablet show a strange behaviour. It was trying to start but reboot before to finish. I was able to finish a full boot but the batery only works for a few minutes. After solve the batery problem, now I can start the tablet without problem about the voltage but, it seems like all this failed attemps to boot have made some damage somewhere.
What I have now?
The tablet start. It show's the trekstor logo. After that it show's the android logo, and that's all. It stuck's looping in the android logo.
What I have tried?
Everything.
1.- Custom recovery. http://forum.xda-developers.com/showthread.php?t=2039964 or this http://forum.xda-developers.com/showthread.php?t=1995984
This method not working in my tablet even when it was not bricked. (I tried it, when I was trying to get root access a month ago).
Power + Volumen (-) gets nothing at all. It's start normally. (and loop in my currently situation)
Power + Volumen (+) gets this screen http://cdn.howtogeek.com/wp-content/uploads/2012/12/android-recovery-mode.jpg and anything happens no matter what button I'm pressing even with the custom recovery in the sdcard.
2.- I tried to flash the tablet, but I didn't find information about how to do it and trust me, I have searched a lot.
I triend with this software: "Amlogic Image Burning Tool v.1.6.2.2" and this firmware http://forum.xda-developers.com/showthread.php?t=2039964 . But I get the error "find no upgrade config, please load it manually". I'm pretty sure I doing something wrong, but I have no experience with this software or flashing in general.
That's all for now I'm tired of reading this forum and this other one in german. (thanks to google translator) http://www.android-hilfe.de/surftab-ventos-8-0-forum/ and I did not find anything useful for me
You people are my only hope. (Any Star wars fan in the room?:laugh:
So any help would be wonderful, thanks in advance and sorry for my mistakes, english is no my mother language.
Dear All,
I have got Kuno 4 tablet and I want to factory reset it, I tried volume up + power button the screen appear with android robot and disappeared.
I searched about root or cwm for it but didn't find any solution.
I tried to contact the company but no replies.
Here is the specs and website for the tablet. http://www.mykuno.com/kuno-specs.html
Please help me guys.
Thanks
Dear Friends,
My Elephone S7 4gb+64GB keep scrolling through boot mode options from up to down. no button is working during this condition except Power Off option.
It Only Turns ON when USB cable is connected to PC.
Otherwise Its Totally dead and can not be turned ON with any combination of Buttons.
I have flashed it with every Stock ROM available on needrom forums. along with Recovery as well.
Nothing worked.
P Lease help.
Best Regards
Maozay Saleem
I have the same problem :crying: someone whit a solution pleaaaas
Was there ever a solution to this please? (I know it's a really old thread but I can't find anything else on this exact problem)
Kerri2602 said:
Was there ever a solution to this please? (I know it's a really old thread but I can't find anything else on this exact problem)
Click to expand...
Click to collapse
Same for me. Doesn´t have anybody a solution yet?
I just could solve the boot error for some weeks after doing a factory reset over the chinese mode until the faillure came up again.
So i resetted it again but this time either this didn´t help.