Related
I'm not noob to flashing or soft brick recovering but this has me confused...
I was running unNamed lastest for a lil while now. Everything was working fine until here recently, while stopped at a rest area checking a webpage my phone cut of and got stuck on a boot loop, only showing the kernal splash screen. Was like wtf? Tried pulling battery ,wiping cache and dalvik. No help. Was like that's fine, have a cwm back up from week ago. Nope didnt work. Was like ok let me try flashing something on my phone that's saved on sd. Flashed Miui, didn't work. Finally got back and tried using this Odin One click "Odin3 One-Click Downloader Stock I-777 UCKH7 with Root no BL" by entropy from the flashing without triggering flash counter guide. Still boot loops only showing the black Samsung Galaxy S II screen. This is after 3 what the odin says as 3 successful flash attempts.
I'm at my wits end, of all the soft bricking i've recovered from, where I assumed as long as a bad bootloader flash didn't happen and i could still get to download mode I'm fine, it could be fixed. But this has me stumped.
*After going into 3e recovery and trying to wipe data, it won't even now go back into 3e recovery. Attempts to but says something like deleting cryption meta data or something of that nature.
-confused-
Nerz said:
I'm not noob to flashing or soft brick recovering but this has me confused...
I was running unNamed lastest for a lil while now. Everything was working fine until here recently, while stopped at a rest area checking a webpage my phone cut of and got stuck on a boot loop, only showing the kernal splash screen. Was like wtf? Tried pulling battery ,wiping cache and dalvik. No help. Was like that's fine, have a cwm back up from week ago. Nope didnt work. Was like ok let me try flashing something on my phone that's saved on sd. Flashed Miui, didn't work. Finally got back and tried using this Odin One click "Odin3 One-Click Downloader Stock I-777 UCKH7 with Root no BL" by entropy from the flashing without triggering flash counter guide. Still boot loops only showing the black Samsung Galaxy S II screen. This is after 3 what the odin says as 3 successful flash attempts.
I'm at my wits end, of all the soft bricking i've recovered from, where I assumed as long as a bad bootloader flash didn't happen and i could still get to download mode I'm fine, it could be fixed. But this has me stumped.
*After going into 3e recovery and trying to wipe data, it won't even now go back into 3e recovery. Attempts to but says something like deleting cryption meta data or something of that nature.
-confused-
Click to expand...
Click to collapse
The one-click downloader is NOT from me, it's a repack of my tar file - and it's starting to sound like the one-click is doing something weird and not flashing the kernel properly.
Use regular old Odin (or Heimdall) to flash the raw tar package.
I'll try it. Though I don't understand how I am in the position I am in from browsing the web on my phone to directly going into a hootloop that neither that odin one click will fix, or any cwm roms won't fix.
Sent from my GT-I9000 using XDA App
I won't have access to computer till later today but I'm trying to figure out what could be wrong. I was thinking that maybe my partitions were bad, but doesn't that odin used, repartition, using a pit file (think that is what pit is for)? Although, this was not from a flash, but rebooted from a couple weeks old successful flash of unNamed while browsing the web so I don't see how that can be the problem. However, even if the partitions were bad, wouldn't odin fail a flash because it has no where to send the firmware files? Also if it was a type of hardware failure, such as processor, wouldn't it not even show the kernel Galaxy S II splash screen? Or is this something that only the gpu handles? It was able to get into cwm before I used the odin though so I can't believe it's cpu because I'm sure that recovery should use it. Just can't figure it out, never had a problem with a boot loop a flash couldn't fix.
If I can't get it to work, will flashing a stock kernel with cwm increment the flash counter? If not I guess I could access my internal sd, try and pull my pictures and the roms off there and then send it to warranty. However I really don't want to. Thanks to anyone in advance.
Sent from my GT-I9000 using XDA App
Nerz said:
I won't have access to computer till later today but I'm trying to figure out what could be wrong. I was thinking that maybe my partitions were bad, but doesn't that odin used, repartition, using a pit file (think that is what pit is for)? Although, this was not from a flash, but rebooted from a couple weeks old successful flash of unNamed while browsing the web so I don't see how that can be the problem. However, even if the partitions were bad, wouldn't odin fail a flash because it has no where to send the firmware files? Also if it was a type of hardware failure, such as processor, wouldn't it not even show the kernel Galaxy S II splash screen? Or is this something that only the gpu handles? It was able to get into cwm before I used the odin though so I can't believe it's cpu because I'm sure that recovery should use it. Just can't figure it out, never had a problem with a boot loop a flash couldn't fix.
If I can't get it to work, will flashing a stock kernel with cwm increment the flash counter? If not I guess I could access my internal sd, try and pull my pictures and the roms off there and then send it to warranty. However I really don't want to. Thanks to anyone in advance.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Ok so after flashing the odin file from http://forum.xda-developers.com/showthread.php?t=1286432 it is still bootlooping at splash screen.
I'm not sure what my options are right now. I'm pretty sure bootloaders can't be the problem. I can't re-partition from odin because it says it can't open the specified file "(Line: 1828)". Is this because it doesn't have pit file? I don't understand how this problem manifested.
If I need to pull contents from sd card from cwm, will flashing a cwm kernal increment flash counter?
Don't repartition using a PIT, it's a great way to screw up your phone. (Hopefully you haven't flashed a PIT at all yet... If you have, I don't quite know what's going on.)
Sent from my GT-P7510 using Tapatalk
Entropy512 said:
Don't repartition using a PIT, it's a great way to screw up your phone. (Hopefully you haven't flashed a PIT at all yet... If you have, I don't quite know what's going on.)
Sent from my GT-P7510 using Tapatalk
Click to expand...
Click to collapse
Have yet to flash a pit file.
Sent from my GT-I9000 using XDA App
I'm in the same situation, except with a Sprint GSII. Have you found a fix, yet?
Juq said:
I'm in the same situation, except with a Sprint GSII. Have you found a fix, yet?
Click to expand...
Click to collapse
Hello there from colombia, i have the same thing over here, i`m stuck with a SGS SGH I777 the flash counter says 7 and either flashing CWM 5 or re-uploading stock room wont work, i have no way to buy a jig and it is pretty odd that im in a different country and i can`t send my phone for warranty repair, i`ve read all over and seems like there is no answer for this. Can anyone get rid of the Deleting Crytion Meta data?? this is all i get. ( and eternal boot loop ).
Thanks in advance.
hardgrid said:
Hello there from colombia, i have the same thing over here, i`m stuck with a SGS SGH I777 the flash counter says 7 and either flashing CWM 5 or re-uploading stock room wont work, i have no way to buy a jig and it is pretty odd that im in a different country and i can`t send my phone for warranty repair, i`ve read all over and seems like there is no answer for this. Can anyone get rid of the Deleting Crytion Meta data?? this is all i get. ( and eternal boot loop ).
Thanks in advance.
Click to expand...
Click to collapse
Will try to help, but will need more specific information.
The OP of this thread started bootlooping while checking a web page in his browser. So, how did it happen for you? Please give as much exact information as possible. Was it after a flash? Or did it start while you were using the phone? Or how?
Mine was connected to an aftermarket car charger while it happened. I read a post somewhere and a couple ppl it happened to believed the same thing, since it was in my 30 day trail period I sent it back to Sams club and got my replacement today. Since I didn't have a jig at the time, I didn't want to flash a cwm kernel and increase my flash counter so I lost some pics of my kids.
Not sure if it was charger related but I couldn't find a fix and wouldn't really call myself a noob at flashing. Might have some things to learn nut far from a noob.
Sent from my I897 using XDA App
I dont't see odin or download in the phone at all. Just connect to Kies. Is my phone bricked? Can it be restored? If it can be restored, can someone lead into the right direction? I was trying to restore the phone and my power went out for 10 min and now it's back on
If you haven't shut off the phone you should be able to load it back up in Odin desktop and start over. Can you get into download mode?
Sent from my SGH-I777 using xda premium
thanitos said:
If you haven't shut off the phone you should be able to load it back up in Odin desktop and start over. Can you get into download mode?
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
when I plug in Odin, I get the yellow bar 0:[COM4] but nothing happens, i gets stuck on boot.bin. and nothing is on the display except for the firmware upgrade encountered..blah blah
BROKKANIC said:
http://forum.xda-developers.com/showthread.php?t=1286432
http://forum.xda-developers.com/showthread.php?t=1313659
Read it and follow the instructions.
Make sure you click the Thanks button for entropy and creepyncrawly
Click to expand...
Click to collapse
Sent from my SGH-I777 using xda premium
i tried and tried and tried. i just took it to att and was able to exchange for a new one through warranty
alee821 said:
i tried and tried and tried. i just took it to att and was able to exchange for a new one through warranty
Click to expand...
Click to collapse
Please don't root or mod that new phone unless you read before you do. You don't belong Modding a phone
Sent from my SGH-I777 using xda premium
Lol. I couldn't figure out how to make my phone do what I wanted so I returned it for a new one that I still won't be able to figure out how to make do what i want because I don't wanna learn just give me cool shizz naoww!
The problem wasn't your phone. It was a kies / driver / USB port problem, lots of people are experiencing the same thing. But I agree with the above poster, please don't modify the new one. If THIS was something you're willing to return it for, imagine if u had an actual problem.
Sent from my Nexus 7 using Tapatalk 2
This guy is as bad as moneyover
Sent from my SGH-I777 using Tapatalk 2
alee821 said:
I dont't see odin or download in the phone at all. Just connect to Kies. Is my phone bricked? Can it be restored? If it can be restored, can someone lead into the right direction? I was trying to restore the phone and my power went out for 10 min and now it's back on
Click to expand...
Click to collapse
Try installing Samsung Kies http://www.google.com/url?sa=t&rct=...Hsxw4ptEdLDgjmDtA&sig2=s2Ik_zAvbYl1EZ28DFGk_A
then pop off your battery and get your Model and serial (NOT IMEI!) numbers and write them down.
in kies click on tools>emergency firmaware recovery a window should popup
boot your device into download mode
on the "emergency fw recovery window" should show your device... it will ask for your SN and model, input them as it shows on the back of your device. It will then install the latest Samsung FW (ICS).
worked for me when i got mine to the point odin wasnt working.
Stock SGH-I777 "Firmware upgrade encountered an issue"
My phone froze and when I tried to boot it back up it showed "Firmware upgrade encountered an issue". I'm running a stock jellybean rom so I tried emergency recovery with kies and it gets stuck at "Proceed to firmware emergency recovery" at 0%. I have tried using different usb cables, ports and even different pc's. I also reinstalled all the drivers properly. I tried flashing a stock rom using odin but it always fails. I can go into download mode but not recovery mode. I looked at many threads and the common course of action is to flash with odin. I have tried numerous times with different methods and it still won't get fixed. Please help. Thanks in advance and I apologise if this question is getting old but I am stumped.
note: before this happened the phone was working perfectly fine. I was running a stock rom and no root
@csgo0013,
creepyncrawly said:
Did you follow all of these steps in order? If not, go through this sequence again, from 1 through 6.
Click to expand...
Click to collapse
Flashing the kernel
Thanks @cyril279. I tried it again with no luck. Flashing the kernel failed. And now it shows that the current binary is now custom. It was official before. And also the binary counter went from 1 to 3. IDK if that helps at all
The increased binary counter is likely the result of attempts to flash the Siyah (non-stock) kernel. I was unaware that it would notch the counter if the flash was NOT successful.
Assuming that you followed the steps thoroughly, in their correct order, and using the correct firmware for the exercise, (siyah kernel and SBL.bin) then I am left to assume, as the post states, that your eMMC memory is damaged.
I have not had much experience with damaged eMMC memory, so perhaps our peers can chime in with other options that may be available to verify the condition of the device.
creepyncrawly said:
Try the following, just in case the problem is nand r/w corruption.
[...the six steps...]
If you are unable to get any of these to flash successfully, first you should assume a bad port, or bad cable, and try other ports, other cables, even another pc. If you can get no flash to succeed, then you may have damaged eMMC memory.
In case it is damaged memory, see this post from Mobile Tech Videos.
Click to expand...
Click to collapse
csgo0013 said:
Thanks @cyril279. I tried it again with no luck. Flashing the kernel failed. And now it shows that the current binary is now custom. It was official before. And also the binary counter went from 1 to 3. IDK if that helps at all
Click to expand...
Click to collapse
Here we go:
I was trying to install a custom rom today (done it about 20 times before on different devices including this one).
Had rooted stock & CWM custom bootloader (unlocked using Casual months ago I think).
Flashed custom rom and (unfortunately) downloaded and flashed a file for the international version (GT-N7100).
Basically, I accidentally flashed the MJ5 custom bootloader by accident (again, it's for international version, which I have SCH-i605).
It's from here under the SPECIAL INSTRUCTIONS FOR 3.6 AND ABOVE heading
(don't ask why, I'm an idiot. Was trying to install this rom and just totally blew past the fact it was for international version)
I've tried using odin to flash "KIES_HOME_I605VRAMC3_I605VZWAMC3_1098177_REV04_user_low_ship.tar.md5" (stock rom) and "sch-i605-16gb.pit" as outlined in the countless 'Restore to stock rom/bootloader from bricked state' articles out there on the webs but it keeps failing. (Part 1b from here)
Current symptoms:
Boot loop almost instant at samsung logo with new N7100 line. Will not boot into bootloader but I can get it into odin download mode.
Using Odin3 v 3.07 (on multiple computers with the right drivers I'm pretty sure) I go into download mode and this is listed:
ODIN MODE
PRODUCT NAME: GT-N7100
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
WARRANTY BIT: 0
Odin hangs at 'Get PIT for mapping' if re-partition is checked, outputs the following if re-partition is unchecked (only auto-reboot and F. Reset Time checked)
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
After this point, it's like the phone stops responding to odin, because if I try to flash again or flash something else, odin just outputs:
<OSM> All threads completed. (succeed 0 / failed 0)
I've been at it for about 8 hours now and I know I'm getting desperate, so I'm hoping you all can help me out before I resort to new phone/sending in for factory reset
Thanks!
- John
Which stock rom are you trying to put back
Sent from my SCH-I605 using XDA Premium 4 mobile app
---------- Post added at 10:35 AM ---------- Previous post was at 10:33 AM ----------
Is the Samsung logo Blickling or is stable
thanks,
chat/email : [email protected]
Sorry to say John but that's not a soft brick. Flashing a bootloader for another device causes a hard brick which willl require a JTAG.
nikhil.kdhand said:
Which stock rom are you trying to put back
Sent from my SCH-I605 using XDA Premium 4 mobile app
---------- Post added at 10:35 AM ---------- Previous post was at 10:33 AM ----------
Is the Samsung logo Blickling or is stable
thanks,
chat/email : [email protected]
Click to expand...
Click to collapse
Everything you ask is in the op.
Samsung logo not stable.
Stock rom he's trying to flash is vramc3 4.1.2
Sent from my SCH-I605 using Tapatalk
Re: JTAG
Hälftebyte said:
Sorry to say John but that's not a soft brick. Flashing a bootloader for another device causes a hard brick which willl require a JTAG.
Everything you ask is in the op.
Samsung logo not stable.
Stock rom he's trying to flash is vramc3 4.1.2
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
Ah, thanks for clearing that up. Guess it's JTAG repair time. I went ahead and purchased a JTAG repair from mobiletechvideos[dot]mybigcommerce[dot]com (Sorry, I haven't posted enough on my account to put outside links in)
For $50, I think it'll be worth having my baby back.
Thanks for your help!
- John Miller
he1calledbubba said:
Ah, thanks for clearing that up. Guess it's JTAG repair time. I went ahead and purchased a JTAG repair from mobiletechvideos[dot]mybigcommerce[dot]com (Sorry, I haven't posted enough on my account to put outside links in)
For $50, I think it'll be worth having my baby back.
Thanks for your help!
- John Miller
Click to expand...
Click to collapse
Yeah many people use him. He's also here on XDA.
Let us know how it turns out. :good:
I actually did the exact thing you did. I can flash other roms, but can't get the radio back or flash AOSP roms. Can you let me know how the JTAG goes? I need to do it, too. It's either that or upgrade to a note 3.
Could you guys give me a recommendation on the one I should choose?
Also. I don't mean to sound like a "noob" or anything, but would it be possible to just flash the i605 bootloader back?
Numzi said:
I actually did the exact thing you did. I can flash other roms, but can't get the radio back or flash AOSP roms. Can you let me know how the JTAG goes? I need to do it, too. It's either that or upgrade to a note 3.
Could you guys give me a recommendation on the one I should choose?
Also. I don't mean to sound like a "noob" or anything, but would it be possible to just flash the i605 bootloader back?
Click to expand...
Click to collapse
Sounds like you have a different issue. Have you tried reverting to stock? If you can flash roms fine then you should be able to go back to stock which would return you to i605 radio and bootloader. If you go back to stock and still have no radio then you probably borked your efs
Sent from my SCH-I605 using Tapatalk
Hälftebyte said:
Sounds like you have a different issue. Have you tried reverting to stock? If you can flash roms fine then you should be able to go back to stock which would return you to i605 radio and bootloader. If you go back to stock and still have no radio then you probably borked your efs
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
I have tried doing that, but Odin gets stuck on different things. I cant even repartition with the i605 pit file. But it lets me repartition with the N7100 one. Also, I cant flash the stock rom as it gets stuck on sboot, but if I use 66root one, it goes through, but doesn't run properly. (Odin also allows me to flash the N7100 stock file.)
The bootloader baseline file also gets stuck on tz.img. (Unless I'm using the wrong one, but I'm sure I'm not)
I kind of lost hope in restoring my phone to normal. if I flash a 4.3 TW Rom, it works fine, but the radio doesnt read. If I flash a 4.1.2 Rom, it works fine and I might or might not get signal, but data doesnt work and my internal memory reads 0/0. Any ideas?
Sent from my SCH-I605 using xda app-developers app
Numzi said:
I have tried doing that, but Odin gets stuck on different things. I cant even repartition with the i605 pit file. But it lets me repartition with the N7100 one. Also, I cant flash the stock rom as it gets stuck on sboot, but if I use 66root one, it goes through, but doesn't run properly. (Odin also allows me to flash the N7100 stock file.)
The bootloader baseline file also gets stuck on tz.img. (Unless I'm using the wrong one, but I'm sure I'm not)
I kind of lost hope in restoring my phone to normal. if I flash a 4.3 TW Rom, it works fine, but the radio doesnt read. If I flash a 4.1.2 Rom, it works fine and I might or might not get signal, but data doesnt work and my internal memory reads 0/0. Any ideas?
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Most likely you're going to need JTAG if you really want to be back to original. If not there are a few things I would try.
Anyway, from what I'm reading you're on an N7100 bootloader so that's why you're able to repartition with the N7100 pit file. You're pretty lucky you're even able to repartition to be honest.
What happens when you flash the N7100 stock rom? Are you able to boot?
Are you using your phone on the Verizon network?
Btw, the reason root66 works is because it only contains the system partition. There's no sboot, boot, modem etc in there to conflict with the N7100 bootloader you currently have. But of course it will have issues since the i605 system image won't jell well with N7100 boot, etc.
Sent from my SCH-I605 using Tapatalk
Hälftebyte said:
Most likely you're going to need JTAG if you really want to be back to original. If not there are a few things I would try.
Anyway, from what I'm reading you're on an N7100 bootloader so that's why you're able to repartition with the N7100 pit file. You're pretty lucky you're even able to repartition to be honest.
What happens when you flash the N7100 stock rom? Are you able to boot?
Are you using your phone on the Verizon network?
Btw, the reason root66 works is because it only contains the system partition. There's no sboot, boot, modem etc in there to conflict with the N7100 bootloader you currently have. But of course it will have issues since the i605 system image won't jell well with N7100 boot, etc.
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
If I could avoid JTagging it would be preferred haha. I don't care about going back to complete original (stock) if that's what you mean. I just want to get my Radio to read while being able to access my storage and data because I'm pretty happy with the 4.3 Touchwiz Rom (at least for now).
When I flash the N7100 stock rom, I can boot. It boot loops until I go into recovery and format data/cache and after that it works fine, with no radio service. Also, I have always been using my phone on the H2O Wireless network with APN settings. But now, the radio doesn't read at all and shows no imei and what not. However if I go back to Jedi X 19 (was my daily 4.1.2 TW driver), the radio reads and I have my imei, but I can't get data and it says my memory is full (can't open gallery and my internal SD says 0/0 bytes).
I know about root66, but what I don't understand is why I was able to flash to the N7100 bootloader and now can't flash back to the i605 one. Is there a specific reason for that?
Btw, Thanks for trying to help me right now. Really appreciated.
Numzi said:
If I could avoid JTagging it would be preferred haha. I don't care about going back to complete original (stock) if that's what you mean. I just want to get my Radio to read while being able to access my storage and data because I'm pretty happy with the 4.3 Touchwiz Rom (at least for now).
When I flash the N7100 stock rom, I can boot. It boot loops until I go into recovery and format data/cache and after that it works fine, with no radio service. Also, I have always been using my phone on the H2O Wireless network with APN settings. But now, the radio doesn't read at all and shows no imei and what not. However if I go back to Jedi X 19 (was my daily 4.1.2 TW driver), the radio reads and I have my imei, but I can't get data and it says my memory is full (can't open gallery and my internal SD says 0/0 bytes).
I know about root66, but what I don't understand is why I was able to flash to the N7100 bootloader and now can't flash back to the i605 one. Is there a specific reason for that?
Btw, Thanks for trying to help me right now. Really appreciated.
Click to expand...
Click to collapse
Okay, I doubt what I was thinking of is going to work then. I was thinking you should flash the N7105 modem while you're on the N7100 rom. Maybe you can try that or maybe try flashing the i605 modem there's always the risk of fully bricking it though.
If that doesn't work I would try using Heimdall to flash the I605 pit file and sboot.bin.
Heimdall sometimes works in cases where Odin fails (according to a JTAG guy a spoke to once)
I have no problem helping. I have three motherboards myself, two of which i experiment with. One is bricked, one is water damaged and semi bricked (no efs, imei, internal memory only works on 4.3 TW) and one is fully functional :laugh:
Hälftebyte said:
Okay, I doubt what I was thinking of is going to work then. I was thinking you should flash the N7105 modem while you're on the N7100 rom. Maybe you can try that or maybe try flashing the i605 modem there's always the risk of fully bricking it though.
If that doesn't work I would try using Heimdall to flash the I605 pit file and sboot.bin.
Heimdall sometimes works in cases where Odin fails (according to a JTAG guy a spoke to once)
I have no problem helping. I have three motherboards myself, two of which i experiment with. One is bricked, one is water damaged and semi bricked (no efs, imei, internal memory only works on 4.3 TW) and one is fully functional :laugh:
Click to expand...
Click to collapse
Well at this point, I was already ready to send it for JTag repair so I'll try anything. Would you mind letting me know which N7105 modem I should flash? I've already tried i605 modems (not through Odin though) and they haven't worked.
I'm a bit confused with how to use Heimdall and where to find sboot for i605. I have it and wanted to try it, but was lost haha.
Oh that's great lolol. Mine is like yours for internal memory right now. I have a back up of my efs folder, but when I restore it, it doesn't read it.
Numzi said:
Well at this point, I was already ready to send it for JTag repair so I'll try anything. Would you mind letting me know which N7105 modem I should flash? I've already tried i605 modems (not through Odin though) and they haven't worked.
I'm a bit confused with how to use Heimdall and where to find sboot for i605. I have it and wanted to try it, but was lost haha.
Oh that's great lolol. Mine is like yours for internal memory right now. I have a back up of my efs folder, but when I restore it, it doesn't read it.
Click to expand...
Click to collapse
If you have CWM or TWRP you could try one of these flashable modems from here http://forum.xda-developers.com/showthread.php?t=2031575
As I said this might brick you fully
Heimdall is pretty easy after you get the hang of it. After download you will need to setup the drivers with the zadig.exe installer. I would use a different usb port from the one you currently use for Odin so you don't have to reinstall samsung drivers whenever you want to use Odin. You should find a tutorial easily to get started. If you need more help I can go into a bit more detail.
To access the files that Heimdall will need (sboot.bin, boot, tz, system, param, modem.bin etc ), make a copy of the tar.md5 rom file you have. Remove the .md5 at the end and use 7z to extract the contents. You will see all the separate files needed for each partition.
The fact that you can actually repartition sounds good though. I feel like if you can get the I605 sboot.bin (bootloader) flashed, you can then partition with the I605 PIT. This is all speculation though :fingers-crossed:
Hälftebyte said:
If you have CWM or TWRP you could try one of these flashable modems from here http://forum.xda-developers.com/showthread.php?t=2031575
As I said this might brick you fully
Heimdall is pretty easy after you get the hang of it. After download you will need to setup the drivers with the zadig.exe installer. I would use a different usb port from the one you currently use for Odin so you don't have to reinstall samsung drivers whenever you want to use Odin. You should find a tutorial easily to get started. If you need more help I can go into a bit more detail.
To access the files that Heimdall will need (sboot.bin, boot, tz, system, param, modem.bin etc ), make a copy of the tar.md5 rom file you have. Remove the .md5 at the end and use 7z to extract the contents. You will see all the separate files needed for each partition.
The fact that you can actually repartition sounds good though. I feel like if you can get the I605 sboot.bin (bootloader) flashed, you can then partition with the I605 PIT. This is all speculation though :fingers-crossed:
Click to expand...
Click to collapse
I got it. Alright then I will try this tomorrow when I finish classes (It's 3am right now and I have to wake up in 4 hours). I'll post here with the result! This is a new suggestion for this, so I'm kind of nervous/excited about the result. haha.
Just think of it as another experiment for you. Fingers crossed. I'll let you know and thanks so much.
Numzi said:
I got it. Alright then I will try this tomorrow when I finish classes (It's 3am right now and I have to wake up in 4 hours). I'll post here with the result! This is a new suggestion for this, so I'm kind of nervous/excited about the result. haha.
Just think of it as another experiment for you. Fingers crossed. I'll let you know and thanks so much.
Click to expand...
Click to collapse
Also in case you didn't realize, since everything except internal storage works in JediX19, when installing Jedi you can install the swap script, FAT32 script (no need to format external sd card). Then you will have 'internal storage' and a signal. Not the best solution but a workaround. Not many roms have the swap script option so I guess you'd be stuck on Jedi if you choose this route.
Hälftebyte said:
Also in case you didn't realize, since everything except internal storage works in JediX19, when installing Jedi you can install the swap script, FAT32 script (no need to format external sd card). Then you will have 'internal storage' and a signal. Not the best solution but a workaround. Not many roms have the swap script option so I guess you'd be stuck on Jedi if you choose this route.
Click to expand...
Click to collapse
So Heimdall didn't work - it failed repartitioning and when I tried unchecking that, failed at bootloader, then at cache, etc. Do you think it's wiser for me to first try flashing the modem then do the SD Swap? or to just do the SD Swap thing on Jedi?
EDIT: I just did the FAT32 script and the internal storage (which is actually my ext SD card), still says 0/0 bytes...
Numzi said:
...
EDIT: I just did the FAT32 script and the internal storage (which is actually my ext SD card), still says 0/0 bytes...
Click to expand...
Click to collapse
Strange it works for me. Otherwise I only have internal memory when I'm on TW 4.3
I guess there's not much more experimenting to do
Hälftebyte said:
Strange it works for me. Otherwise I only have internal memory when I'm on TW 4.3
I guess there's not much more experimenting to do
Click to expand...
Click to collapse
I'll keep trying to see if the Swap could work eventually. I'll just stick with Jedi or the 4.3 rom until I JTag repair in 2 weeks. Thanks for your help. I really appreciate it.
Numzi said:
I'll keep trying to see if the Swap could work eventually. I'll just stick with Jedi or the 4.3 rom until I JTag repair in 2 weeks. Thanks for your help. I really appreciate it.
Click to expand...
Click to collapse
No prob. Good luck. It looked so hopeful with you being able to partition. :good:
Hälftebyte said:
No prob. Good luck. It looked so hopeful with you being able to partition. :good:
Click to expand...
Click to collapse
I decided to just get the JTag service now and just paid for it. I'll let you know if it really goes back to perfect.
I'll first list specs of my phone so it gives you some information you might need to help me solve my problem.
Verizon Galaxy S4
Android 4.3 MK2
Download mode works properly. Phone will not turn on unless it is plugged in via micro USB. Recovery mode boot loops.
(Recovery mode) I hold volume up and power after I plug in the micro usb to turn the phone on, and it shows the samsung logo, and the blue text pops up in the corner and says "Recovery Booting". After about 2 seconds of it showing that, it'll just black screen and repeat this boot loop of the samsung logo popping up and the blue text as if I have the recovery keys held down.
What led up to all of this is, my phone crashed and it turned off and tried to reboot, and crashed during the reboot. That's where I ran into the problem with the phone not turning on unless it was plugged in(battery is fully charged). At that time, if I plugged it in and didn't touch any keys, it would vibrate, and then a battery icon with a gray circle loading thing would pop up in a frozen picture. Then after about 8 seconds, it'd black screen and boot loop that. I couldn't get into Recovery at that time, but download worked fine. So then I googled a little and I flashed something onto my phone using Odin and Download mode. The file is supposed to make the default boot sequence go to recovery mode. This worked, but since Recovery mode is broken, it doesn't work entirely. After this, I didn't do anything for a day, and then I read some posts and tried flashing both a Wipe and No-wipe stock firmware MK2. Both of which did not work, since still, the phone was defaulting its boot to the broken recovery mode.
So as far as I know, the only way to do anything to the phone is through Odin and Download mode since nothing else works. I'm really hoping I'll be able to fix this, because I'd rather not pay $100 for a new phone :/
Basically what I'm asking for is what I should do next.. My only last thought is(If its possible) to wipe the phone using Odin, then putting the stock firmware back onto it. (The wipe of course getting rid of that stupid file that makes it go into recovery mode.
Baurblades43 said:
I'll first list specs of my phone so it gives you some information you might need to help me solve my problem.
Verizon Galaxy S4
Android 4.3 MK2
Download mode works properly. Phone will not turn on unless it is plugged in via micro USB. Recovery mode boot loops.
(Recovery mode) I hold volume up and power after I plug in the micro usb to turn the phone on, and it shows the samsung logo, and the blue text pops up in the corner and says "Recovery Booting". After about 2 seconds of it showing that, it'll just black screen and repeat this boot loop of the samsung logo popping up and the blue text as if I have the recovery keys held down.
What led up to all of this is, my phone crashed and it turned off and tried to reboot, and crashed during the reboot. That's where I ran into the problem with the phone not turning on unless it was plugged in(battery is fully charged). At that time, if I plugged it in and didn't touch any keys, it would vibrate, and then a battery icon with a gray circle loading thing would pop up in a frozen picture. Then after about 8 seconds, it'd black screen and boot loop that. I couldn't get into Recovery at that time, but download worked fine. So then I googled a little and I flashed something onto my phone using Odin and Download mode. The file is supposed to make the default boot sequence go to recovery mode. This worked, but since Recovery mode is broken, it doesn't work entirely. After this, I didn't do anything for a day, and then I read some posts and tried flashing both a Wipe and No-wipe stock firmware MK2. Both of which did not work, since still, the phone was defaulting its boot to the broken recovery mode.
So as far as I know, the only way to do anything to the phone is through Odin and Download mode since nothing else works. I'm really hoping I'll be able to fix this, because I'd rather not pay $100 for a new phone :/
Basically what I'm asking for is what I should do next.. My only last thought is(If its possible) to wipe the phone using Odin, then putting the stock firmware back onto it. (The wipe of course getting rid of that stupid file that makes it go into recovery mode.
Click to expand...
Click to collapse
are you an unrooted stock ROM??
I'm sure someone smarter then me will know exactly what is going on here but things I'd try in the mean time is another Odin file possibly. I believe Surge has said that if MK2 file doesn't work to try the MJ7 full wipe/Re-Partition one. At this point what you got to lose?
Sent from my SCH-I545 using Tapatalk
decaturbob said:
are you an unrooted stock ROM??
Click to expand...
Click to collapse
I am rooted with safestrap installed. Using the Hyperdrive ROM
Mistertac said:
I'm sure someone smarter then me will know exactly what is going on here but things I'd try in the mean time is another Odin file possibly. I believe Surge has said that if MK2 file doesn't work to try the MJ7 full wipe/Re-Partition one. At this point what you got to lose?
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
I believe I've already done this? I'm not sure. I'll have to check once I get home later in the day.
Baurblades43 said:
I believe I've already done this? I'm not sure. I'll have to check once I get home later in the day.
Click to expand...
Click to collapse
I would strongly suggest the Full Wipe method back to MK2. As long as you can boot into Download mode this is probably the best way to get a clean OS working again. From there you know the drill, Saferoot, SS, etc.
http://forum.xda-developers.com/showthread.php?t=2578209
Use sp flash tool and install another recovery. That will surely work. Just download sp flash tool and drivers for your device and install these files in your pc. After that download recovery.img and scatter file.txt for your device. First load the scattered file.txt using sp flash tool, now uncheck all the tick box except the recovery. Now click on recovery and select the recovery.img which you have downloaded. Now take out your phone's battery and connect it via usb cable. Make sure you have installed your phone's drivers. Click on download button on sp flash tool. If not works then remove the usb cable and reconnect again. You will see a green circle saying its done. Click on ok. And try to get into recovery again.
Sent from unnamed ROM using xda premium app
naveen6252 said:
Use sp flash tool and install another recovery. That will surely work. Just download sp flash tool and drivers for your device and install these files in your pc. After that download recovery.img and scatter file.txt for your device. First load the scattered file.txt using sp flash tool, now uncheck all the tick box except the recovery. Now click on recovery and select the recovery.img which you have downloaded. Now take out your phone's battery and connect it via usb cable. Make sure you have installed your phone's drivers. Click on download button on sp flash tool. If not works then remove the usb cable and reconnect again. You will see a green circle saying its done. Click on ok. And try to get into recovery again.
Sent from unnamed ROM using xda premium app
Click to expand...
Click to collapse
If he's using Safestrap, it most likely means he can't flash a recovery image. He could brick his phone.
Was just going to say that. I don't know much about that flash tool myself... Is it an alternative to Odin? From the little I read... You can flash an entire rom or just something in particular to repair a phone. Either way I don't think the OP should try that method. Stick with Odin.
Sent from my SCH-I545 using Tapatalk
riker147 said:
If he's using Safestrap, it most likely means he can't flash a recovery image. He could brick his phone.
Click to expand...
Click to collapse
+1, the only safe option is to flash a clean factory image via Odin. Otherwise say hello to your new doorstop if you mess with Recovery on MK2 locked bootloader
Flash new image >> 15-25 minutes
Root >> 2-3 minutes
SS >> 3-5 minutes
HD RLS15 (for example) >> 15 minutes
In about an hour or so phone is back up and running. No brainer..........
cbmggm said:
+1, the only safe option is to flash a clean factory image via Odin. Otherwise say hello to your new doorstop if you mess with Recovery on MK2 locked bootloader
Flash new image >> 15-25 minutes
Root >> 2-3 minutes
SS >> 3-5 minutes
HD RLS15 (for example) >> 15 minutes
In about an hour or so phone is back up and running. No brainer..........
Click to expand...
Click to collapse
The thing is.. I've tried flashing new images before, and all its doing is overwriting my old one, but the stupid factory thing I flashed makes the default path the broken recovery so I don't think this will work.
Baurblades43 said:
The thing is.. I've tried flashing new images before, and all its doing is overwriting my old one, but the stupid factory thing I flashed makes the default path the broken recovery so I don't think this will work.
Click to expand...
Click to collapse
Are you sure you flashed the full wipe tar file? I've successfully used this method numerous times.
http://www.androidfilehost.com/?fid=23269279319198294
Make sure you download to PC first then copy to your external SD card on your phone.
Sent from my SCH-I545 using xda app-developers app
cbmggm said:
Are you sure you flashed the full wipe tar file? I've successfully used this method numerous times.
http://www.androidfilehost.com/?fid=23269279319198294
Make sure you download to PC first then copy to your external SD card on your phone.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Umm.. Why would I want to put that on my external SD card? Wouldn't I want to just use it through ODIN?
Oops sorry I meant to leave the tar file on the PC.
Sent from my SCH-I545 using xda app-developers app
cbmggm said:
Oops sorry I meant to leave the tar file on the PC.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Haha alright. I'll go ahead and download this file and give it a go. Wish me luck.
cbmggm said:
Oops sorry I meant to leave the tar file on the PC.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Also, can you give me a quick guide on how to flash this through Odin? I just wanna make sure I'm not doing anything wrong.
Baurblades43 said:
Also, can you give me a quick guide on how to flash this through Odin? I just wanna make sure I'm not doing anything wrong.
Click to expand...
Click to collapse
Directions are in the thread: http://forum.xda-developers.com/showthread.php?t=2578209
Oishikatta said:
Directions are in the thread: http://forum.xda-developers.com/showthread.php?t=2578209
Click to expand...
Click to collapse
I followed the directions for everything as they were given and I got the same result I've gotten after flashing anything. Everything works fine, then the big blue "RESET" icon appears on Odin, then the phone reboots, I get samsung logo, and then the blue "recovery booting" text shows up.. and then the screen blacks out, and boot loops that same thing.
Baurblades43 said:
I followed the directions for everything as they were given and I got the same result I've gotten after flashing anything. Everything works fine, then the big blue "RESET" icon appears on Odin, then the phone reboots, I get samsung logo, and then the blue "recovery booting" text shows up.. and then the screen blacks out, and boot loops that same thing.
Click to expand...
Click to collapse
Make sure you're using the Full Wipe image (SCH-I545_VZW_1_20131212083410_mwx72ql56g_fac.zip), and have extracted it to a .tar.md5
Also download the JFLTE_USA_VZW_16G.pit (assuming you have the 16GB version of the S4).
Put the .tar.md5 in the AP section and the PIT file in the PIT section.
Leave the other checkboxes in Odin at their defaults.
Take a screenshot at this point, click Start, and then take another screenshot when it completes or gives an error.
Oishikatta said:
Make sure you're using the Full Wipe image (SCH-I545_VZW_1_20131212083410_mwx72ql56g_fac.zip), and have extracted it to a .tar.md5
Also download the JFLTE_USA_VZW_16G.pit (assuming you have the 16GB version of the S4).
Put the .tar.md5 in the AP section and the PIT file in the PIT section.
Leave the other checkboxes in Odin at their defaults.
Take a screenshot at this point, click Start, and then take another screenshot when it completes or gives an error.
Click to expand...
Click to collapse
Alright. I did a lot between your post and now. All of the information for everything I did is underneath each picture thats posted. So read them carefully.
http://imgur.com/3c4YZoz,CjiLmlY,Gfjx7Tc,TO1xSMV#0
EDIT: I looked up the battery icon problem and I found some interesting news. After all of the struggling with the darn phone, this is a common problem with this phone on 4.3. Its an overheating issue to the PBA(Motherboard I think). Thanks everyone for the help, I'm just gonna send it in and get a new phone.
Hi
Is it possible to access the S3's internal memory?
Yesterday my S3 rebooted itself and is now stuck on the Samsung screen, I have accessed at the recovery options (power+ volume+main button), but am wary of doing a factory reset as there are files on my phones internal storage I'd like to keep. Is there any way of recovering these files, including contacts (not sure if they a restored on the sim or internal mem)? Kies recognises that a usb cable is plugged in, but just doesnt get past the connecting screen.
Thanks
Steven
Unflashed S3 with up to date firmware
Not without voiding your warranty, a custom recovery would enable you to access internal sd.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
Not without voiding your warranty, a custom recovery would enable you to access internal sd.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Thanks for your quick response
I'm not worried about the warranty, I've been reading up about ClockworkMod Recovery 6.0.4.7, but am not sure of the steps I need to do before installing it, as I'm having problems connecting my phone by USB.
You need to enter the Download Mode in order to install a custom recovery. From there you can access your data
If the phone won't connect to Odin then check in download mode, is the product name blank?
Sent from my GT-I9300 using Tapatalk
boomboomer said:
If the phone won't connect to Odin then check in download mode, is the product name blank?
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Ok
I've now managed top get Odin to see my phone. I've looked around and am not sure what I should do next.
Do I need to install a custom firmware before trying to recover my files? if so, any recomendations?
Thanks
nofixta said:
Ok
I've now managed top get Odin to see my phone. I've looked around and am not sure what I should do next.
Do I need to install a custom firmware before trying to recover my files? if so, any recomendations?
Thanks
Click to expand...
Click to collapse
LoL don't flash a new firmware.
You need to flash a custom recovery only, like PhilZ Touch. This can allow you to access data.
Either way, factory reset would delete contacts and everything related to the OS, I'm not sure if your media files are affected.
~ RazorMC
nofixta said:
Ok
I've now managed top get Odin to see my phone. I've looked around and am not sure what I should do next.
Do I need to install a custom firmware before trying to recover my files? if so, any recomendations?
Thanks
Click to expand...
Click to collapse
Bro, get Philz advanced CWM for your device. use odin to flash the recovery. then reboot to recovery and connect usb to pc then in recovery mode mount internal storage, your internal storage will become available on your pc as removable storage, voila now back up your data.
hope this will help if you need detailed steps look in the forum there are a lot of tutorials available.
Worked a treat, everything recovered.
Thanks for your help averyone
Steven