Bricked, need help :( - Galaxy S III Q&A, Help & Troubleshooting

Okay, so basically I flashed googy max kernel, then stupidly, after reading the instructions several times, i flashed cyanogenmod as the 2nd rom on the dual boot, but i did that without wiping the system like it said, so obviously it bootloops at the cm screen. And i never installed a recovery on that side of the dual boot. so basically now, every time i boot up the phone it bootloops at the cm start screen, and i can't get into a recovery to fix it, and i don't know how to get back to the first boot rom which is okay. i can boot into download mode and have tried several times to install cwm on the second side, but to no avail, it still won't let me boot into recovery or the bootloader. So right now i'm terrified i've completely irreparably bricked it, but i just hope theres someone of higher intelligence than me that knows how to fix it

AFAIK, from reading the Siyah thread (Which googy is based on) isn't there a key combination you can press at boot to determine how you boot.?
There is only one recovery per device btw so hold vol up, home and power to get into recovery

My good sir, I wish to propose to you.
Oh my god, you've saved my life!
and i'm sorry for wasting your time

miketino said:
My good sir, I wish to propose to you.
Click to expand...
Click to collapse
I'm not available I am afraid
miketino said:
Oh my god, you've saved my life!
and i'm sorry for wasting your time
Click to expand...
Click to collapse
No problem. Better to ask questions when you don't know...

Related

Optimus V Brick!?! HELP!

So I went to flash to my cell using romrepo.info/wiki/index.php?title=Install_from_Stock_Optimus. I got to step 15, and I realized I forgot to place the ROM in my sd card so I restarted the cellphone so I could place the ROM in my sd card, go to reboot to repeat the process and I get a screen that goes:
Fastboot mode started
gpio_i2c: invalid khz: 0
bl: i2c write error
udc_start()
--suspend--
--reset--
--portchange--
--reset--
--portchange--
fastboot: processing commands
Its a blue screen. I just want to flash this Any guides to get me out of this?
http://forum.xda-developers.com/showthread.php?t=1088046
Sent from my LG-P500 using Tapatalk
In the above guide replace optimus one recovery with optimus v.
Sent from my LG-P500 using Tapatalk
Can someone post a link to a recovery file for my phone? You guys are the best.
I followed the above guide, and used the ROM here prepaidandroid.org/index.php?title=How_to_restore_your_Optimus_V_to_almost_original_condition
It reboots, and the same blue screen is up
My brother flashed the wrong recovery, I tried using the tutorial to fix it using fastboot.exe from windows, but it won't work as it can't find the device. windows sees an android device and I installed the drivers from lg, but it refuses to enumerate in adb shell, so I can't connect to it, any ideas?
okay after fiddleing with it a bit, I got the origional recovery mode restored on it, and when I boot into recovery and plug in usb adb can see the device, I have a stock froyo rom how do I restore from here, or can I reflash clockwork from here?
MtDewFella said:
okay after fiddleing with it a bit, I got the origional recovery mode restored on it, and when I boot into recovery and plug in usb adb can see the device, I have a stock froyo rom how do I restore from here, or can I reflash clockwork from here?
Click to expand...
Click to collapse
Can you get me to where you are? Step by step would be nice
Not sure what recovery files I need or ROM I need or anything, or how to use adb. I've been looking online for the past 3hrs on this stuff.
kaivorth said:
Can you get me to where you are? Step by step would be nice
Not sure what recovery files I need or ROM I need or anything, or how to use adb. I've been looking online for the past 3hrs on this stuff.
Click to expand...
Click to collapse
go to this page
this only works if you have some sort of custome recovery, My brother had the wrong one for the optimus v (clockworkmod 3.2.0.0) and it wouldn't install any rom.
I just played around with this page until I got the stock bootloader/recovery back, however I'm not sure if this is what we want, you may want to try flashing one of the custom recoveries listed on the site, now that I have the stock I can re-flash anything.
MtDewFella said:
go to this page
this only works if you have some sort of custome recovery, My brother had the wrong one for the optimus v (clockworkmod 3.2.0.0) and it wouldn't install any rom.
I just played around with this page until I got the stock bootloader/recovery back, however I'm not sure if this is what we want, you may want to try flashing one of the custom recoveries listed on the site, now that I have the stock I can re-flash anything.
Click to expand...
Click to collapse
How did you get the stock recovery working though thats what I need. I can't get into any recovery.
kaivorth said:
How did you get the stock recovery working though thats what I need. I can't get into any recovery.
Click to expand...
Click to collapse
you need to get into a custom recovery, optimus v press back, volume up and power at the same time to boot into a recovery, if you don't have a recovery at all there maybe an issue. so try and boot into a recovery and let me know what you have.
MtDewFella said:
you need to get into a custom recovery, optimus v press back, volume up and power at the same time to boot into a recovery, if you don't have a recovery at all there maybe an issue. so try and boot into a recovery and let me know what you have.
Click to expand...
Click to collapse
Nothing happened. Just that blue screen.
Looking in my SD card I noticed I have a backup of the recovery-clockwork-3.2.0.0-vm670 file. This anything helpful?
kaivorth said:
Nothing happened. Just that blue screen.
Click to expand...
Click to collapse
if you can't get into any recovery your device maybe permintally bricked, but don't take what I say as gospel I'm new at this as well, I'm still looking up more info, in the mean time you need to figure out how to get into recovery, google for key combos, also when using a key combo to get into recovery make sure power is the last button you press in the combo, hold down the others then power (while still holding the other buttons) and release as soon as you see the lg logo, it should go away quickly and after a few seconds of black you'll see the recovery, if the lg logo stays up for a while it's trying to normal boot.
kaivorth said:
Looking in my SD card I noticed I have a backup of the recovery-clockwork-3.2.0.0-vm670 file. This anything helpful?
Click to expand...
Click to collapse
you don't want that version of clockwork, that's what my brother flashed and that started this whole mess
MtDewFella said:
if you can't get into any recovery your device maybe permintally bricked, but don't take what I say as gospel I'm new at this as well, I'm still looking up more info, in the mean time you need to figure out how to get into recovery, google for key combos, also when using a key combo to get into recovery make sure power is the last button you press in the combo, hold down the others then power (while still holding the other buttons) and release as soon as you see the lg logo, it should go away quickly and after a few seconds of black you'll see the recovery, if the lg logo stays up for a while it's trying to normal boot.
Click to expand...
Click to collapse
I think if I can get adp to recognize this device I can fix it. Fastboot recognizes this, but adp doesn't. Is there a special adp driver maybe lol?
Got a little bit of progress....did a full system flash using fastbootroot and NVM OMG its fully booted! wow never thought I'd see the homescreen again...now to try to flash it again hahahaha
Now what verison of recovery and rom should I be looking at?
kaivorth said:
Got a little bit of progress....did a full system flash using fastbootroot and NVM OMG its fully booted! wow never thought I'd see the homescreen again...now to try to flash it again hahahaha
Now what verison of recovery and rom should I be looking at?
Click to expand...
Click to collapse
if you want to get aospCMod on your phone, follow this tutorial, this is what I did for my phone works great.
Now my question to you is how did you use fast boot root tool to get back to home screen because I'm still stuck at recovery
okay I finally managed to fix it, I figured out how to use fast boot root and got a custom recovery, from there I could flash other recoveries, which was importaint because even though I could install any rom I wanted it was stuck in a boot loop where it would keep booting into recovery, So i flashed Xionia_CWMA_12518.4_VM_Recovery.zip from here and under advanced it has an option to fix the boot loop, then from there I could flash a rom and it's fixed.
Lot of work fixin' my first bricked phone, but I learned alot.

Help Please! Phone won't turn on

First off, my apologies if this is in the wrong forum. Mods, you may move this thread if need be. I was just shown this website about two weeks ago by a friend and have only been a lurker since. So I apologize if my first post is one needing assistance.
First off, I am not the most knowledgeable person when it comes to doing all this reboot,recovery, root,etc. But I can usually figure stuff out. I have researched how to do all this stuff over the last to weeks learning how to do all this. Let it be known that I was already rooted with siyah 3.4.2? kernel with superuser, CWM, and had ROM Manager downloaded. Last night I had finally decided to try and download a custom rom (AOKP), and I went through ROM Manager to try and reboot into recovery mode..the phone went dead. I have not been able to turn the phone on since last night. I have tried taking the battery out, trying to hold down volume buttons/power button to get into download mode, etc..But nothing is happening. When I power on, I can see the screen where it says "Samsung Galaxy SII" w/ the triangle, but then the screen goes black and nothing. In a dark room, you can see that the screen looks like it's trying to fire by flickering, but again...nothing. Sorry if this has been alot of reading, but I just want to be as thorough as I can. If anybody can tell me what went wrong, and how it might be fixed, I would greatly appreciate it.
Thanks
BigCohiba said:
First off, my apologies if this is in the wrong forum. Mods, you may move this thread if need be. I was just shown this website about two weeks ago by a friend and have only been a lurker since. So I apologize if my first post is one needing assistance.
First off, I am not the most knowledgeable person when it comes to doing all this reboot,recovery, root,etc. But I can usually figure stuff out. I have researched how to do all this stuff over the last to weeks learning how to do all this. Let it be known that I was already rooted with siyah 3.4.2? kernel with superuser, CWM, and had ROM Manager downloaded. Last night I had finally decided to try and download a custom rom (AOKP), and I went through ROM Manager to try and reboot into recovery mode..the phone went dead. I have not been able to turn the phone on since last night. I have tried taking the battery out, trying to hold down volume buttons/power button to get into download mode, etc..But nothing is happening. When I power on, I can see the screen where it says "Samsung Galaxy SII" w/ the triangle, but then the screen goes black and nothing. In a dark room, you can see that the screen looks like it's trying to fire by flickering, but again...nothing. Sorry if this has been alot of reading, but I just want to be as thorough as I can. If anybody can tell me what went wrong, and how it might be fixed, I would greatly appreciate it.
Thanks
Click to expand...
Click to collapse
DONT USE ROM MANAGER
Jeez how many times does that have to be said in this place
Sent from my Sony Xperia Ion
Yup don't use cwm or rom manager use Odin to flash roms also rm sucks they only have a few roms
Sent from my SAMSUNG-SGH-I777 using xda premium
BigCohiba said:
First off, my apologies if this is in the wrong forum. Mods, you may move this thread if need be. I was just shown this website about two weeks ago by a friend and have only been a lurker since. So I apologize if my first post is one needing assistance.
First off, I am not the most knowledgeable person when it comes to doing all this reboot,recovery, root,etc. But I can usually figure stuff out. I have researched how to do all this stuff over the last to weeks learning how to do all this. Let it be known that I was already rooted with siyah 3.4.2? kernel with superuser, CWM, and had ROM Manager downloaded. Last night I had finally decided to try and download a custom rom (AOKP), and I went through ROM Manager to try and reboot into recovery mode..the phone went dead. I have not been able to turn the phone on since last night. I have tried taking the battery out, trying to hold down volume buttons/power button to get into download mode, etc..But nothing is happening. When I power on, I can see the screen where it says "Samsung Galaxy SII" w/ the triangle, but then the screen goes black and nothing. In a dark room, you can see that the screen looks like it's trying to fire by flickering, but again...nothing. Sorry if this has been alot of reading, but I just want to be as thorough as I can. If anybody can tell me what went wrong, and how it might be fixed, I would greatly appreciate it.
Thanks
Click to expand...
Click to collapse
Remove the battery and replace it. hold the up/down volume and power button. The screen should light up. Continue to hold them until the phone goes into recovery mode. The phone should turn on and off a couple times before it enters recovery. Then wipe the data and caches. Hopefully at the point the phone will work. If it wont work you could always try to buy a download jig. They are only a couple dollars and can easily be found with a search.
The man that can Creepycrawler in 5 4 3 2 1..... Please
slim1991 said:
Yup don't use cwm or rom manager use Odin to flash roms also rm sucks they only have a few roms
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
Nothing's wrong with using CWM to flash a ROM.
dsfletch said:
Remove the battery and replace it. hold the up/down volume and power button. The screen should light up. Continue to hold them until the phone goes into recovery mode. The phone should turn on and off a couple times before it enters recovery. Then wipe the data and caches. Hopefully at the point the phone will work. If it wont work you could always try to buy a download jig. They are only a couple dollars and can easily be found with a search.
Click to expand...
Click to collapse
This did not work. I will see what I can find on the JIG
BigCohiba said:
This did not work. I will see what I can find on the JIG
Click to expand...
Click to collapse
Take out battery hold volume button down and plug usb you will enter to download. Flash siyah kernel using odin.
xhepera said:
Nothing's wrong with using CWM to flash a ROM.
Click to expand...
Click to collapse
That usually cause more trouble than it's worth. Espeically for a noob. I had been in that situation back when I first start doing it. First thing I used was CWM and I had the same/similar problem.
That is why everyone here always mentioned to not use CWM.
BeenAndroidized said:
That usually cause more trouble than it's worth. Espeically for a noob. I had been in that situation back when I first start doing it. First thing I used was CWM and I had the same/similar problem.
That is why everyone here always mentioned to not use CWM.
Click to expand...
Click to collapse
No one says not to use cwm, please do not talk out of your ass like that
Sent from my Sony Xperia Ion
Nick281051 said:
No one says not to use cwm, please do not talk out of your ass like that
Click to expand...
Click to collapse
Not trying to be that way, just from my past experience with CWM. If you think I was being rude "talk out of my ass like that". Then I am sorry to bother for responding... Thank you for letting me know (no pun intended).
@BigCohiba,
You need to get into download mode. You should be able to do that without using a jig. With the phone off, but with the battery still in the phone, hold down vol- and vol+ (but not power) while you plug in the usb cable.
The following instructions given by fakhri should also work:
fakhri said:
Take out battery hold volume button down and plug usb you will enter to download.
Click to expand...
Click to collapse
After that, flashing siyah kernel alone may be enough to allow the phone to boot, but you may have trouble finding a Siyah in Odin flashable tar format.
...or, flash straight stock UCKH7, or flash stock plus root UCKH7. You can find download links for those in one or the other of the guides linked in my signature.
Please let us know your success or problems as you proceed.
BeenAndroidized said:
Not trying to be that way, just from my past experience with CWM. If you think I was being rude "talk out of my ass like that". Then I am sorry to bother for responding... Thank you for letting me know (no pun intended).
Click to expand...
Click to collapse
You can't tell me you don't use cwm, that's what I mean. Any custom kernel has it baked in and is necessary to flash custom roms
Sent from my Sony Xperia Ion
Nick281051 said:
You can't tell me you don't use cwm, that's what I mean. Any custom kernel has it baked in and is necessary to flash custom roms
Sent from my Sony Xperia Ion
Click to expand...
Click to collapse
Why would someone not use it? I'm confused.
Rom manager is an issue, not recovery...
Nick281051 said:
You can't tell me you don't use cwm, that's what I mean. Any custom kernel has it baked in and is necessary to flash custom roms
Sent from my Sony Xperia Ion
Click to expand...
Click to collapse
Understood. I must have missed understood the comment. That is correct, CWM Recovery is builded into the custom ROMs.
qwertyaas said:
Why would someone not use it? I'm confused.
Rom manager is an issue, not recovery...
Click to expand...
Click to collapse
That is what I meant ROM Manager... Sorry for the confusion...
BeenAndroidized said:
Understood. I must have missed understood the comment. That is correct, CWM Recovery is builded into the custom ROMs.
That is what I meant ROM Manager... Sorry for the confusion...
Click to expand...
Click to collapse
ROM Manager =! Cwm
Sent from my Sony Xperia Ion
creepyncrawly said:
@BigCohiba,
You need to get into download mode. You should be able to do that without using a jig. With the phone off, but with the battery still in the phone, hold down vol- and vol+ (but not power) while you plug in the usb cable.
The following instructions given by fakhri should also work:
After that, flashing siyah kernel alone may be enough to allow the phone to boot, but you may have trouble finding a Siyah in Odin flashable tar format.
...or, flash straight stock UCKH7, or flash stock plus root UCKH7. You can find download links for those in one or the other of the guides linked in my signature.
Please let us know your success or problems as you proceed.
Click to expand...
Click to collapse
Thanks, I will try these methods when I get home tonight and hope they work
fakhri said:
Take out battery hold volume button down and plug usb you will enter to download
Click to expand...
Click to collapse
creepyncrawly said:
...or, flash straight stock UCKH7. You can find download links for those in one or the other of the guides linked in my signature.
Please let us know your success or problems as you proceed.
Click to expand...
Click to collapse
These two things worked. Phone is back to stock and working. Thanks to everybody for helping very much!

Resolved [Q] pls help....phone wont boot beyond samsung boot logo

i was running two roms with dual boot. first was a supernexus jb rom and other mystic glory. i had some hicups with supernexus so i flashed a dream kernel over it. for the first time it booted upto dream logo (even asked for loading 2nd rom) and then went black; phone turned off. second time happened the same thing. then i tried to go to cwm recovery mode, but no luck. so booted with mystic glory rom and from the restart menu tried to go to cwm recovery. the phone turned off and now the phone wont boot beyond samsung galaxy s2 logo.
i searched through this forum and couldnt find any solution.
any help would be greatly appreciated. pls provide any links to any threads if you want me to download something.
Thanks
poooolbachhan said:
i was running two roms with dual boot. first was a supernexus jb rom and other mystic glory. i had some hicups with supernexus so i flashed a dream kernel over it. for the first time it booted upto dream logo (even asked for loading 2nd rom) and then went black; phone turned off. second time happened the same thing. then i tried to go to cwm recovery mode, but no luck. so booted with mystic glory rom and from the restart menu tried to go to cwm recovery. the phone turned off and now the phone wont boot beyond samsung galaxy s2 logo.
i searched through this forum and couldnt find any solution.
any help would be greatly appreciated. pls provide any links to any threads if you want me to download something.
Thanks
Click to expand...
Click to collapse
Dual booting has always been unstable and the only way out is to start from scratch. I would not advice dual booting unless you are able to spend time redoing it.
zelendel said:
Dual booting has always been unstable and the only way out is to start from scratch. I would not advice dual booting unless you are able to spend time redoing it.
Click to expand...
Click to collapse
thks mate for the reply.........any suggestions to get out of this mess.....
poooolbachhan said:
thks mate for the reply.........any suggestions to get out of this mess.....
Click to expand...
Click to collapse
Did u use the rom manager app?
Go to the development section and check out the stickies for going back to stock. That should be your first step.
Sent from my SGH-I777 using xda premium
Phalanx7621 said:
Did u use the rom manager app?
Click to expand...
Click to collapse
i m not sure wt u r suggesting.............but it was on my phone.......and now i cant get anyplace except for download mode using usb cable......
Red_81 said:
Go to the development section and check out the stickies for going back to stock. That should be your first step.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
i have tried going back to stock........odin runs completely and passes.......phones starts reboot......once past samsung logo, it shows cwm recovery pic for a sec from previous flash (which is wierd, since the phone must be back to stock)..........and goes black.......still able to go to download mode.......
i have also tried bootloader i777uckh7sbl.tar from one the posts here.........still no luck....
i think i have seriously messed up the phone........but since i can manage to get to download mode, its not a hard brick????
poooolbachhan said:
i have tried going back to stock........odin runs completely and passes.......phones starts reboot......once past samsung logo, it shows cwm recovery pic for a sec from previous flash (which is wierd, since the phone must be back to stock)..........and goes black.......still able to go to download mode.......
i have also tried bootloader i777uckh7sbl.tar from one the posts here.........still no luck....
i think i have seriously messed up the phone........but since i can manage to get to download mode, its not a hard brick????
Click to expand...
Click to collapse
The only think that can hardbrick was that bootloader you flashed... Don't do that when it's completely unnecessary.
korockinout13 said:
The only think that can hardbrick was that bootloader you flashed... Don't do that when it's completely unnecessary.
Click to expand...
Click to collapse
does that mean my phone is hardbricked........if not pls show me a way...........still can get into download mode...........
poooolbachhan said:
does that mean my phone is hardbricked........if not pls show me a way...........still can get into download mode...........
Click to expand...
Click to collapse
Brick means no sign of life. Stop using that word.
122ninjas said:
Brick means no sign of life. Stop using that word.
Click to expand...
Click to collapse
thanks mate........that is a gre8 relief .........any suggestions to get me out of this mess?........i could have get the jtag done on it but i live in India and shipping the phone to mobiletechvideos and getting it fixed will cost me nearly a brand new phone..........since it is US version of s2, i cant get it fixed in India through samsung........
i need some definitive actions.....because everything i have been doing until now through research made it worse.......only life signs its showing right now is getting in to download mode with a pc connection......also smetimes i see a flicker in the bottom four keys......pls help
poooolbachhan said:
thanks mate........that is a gre8 relief .........any suggestions to get me out of this mess?........i could have get the jtag done on it but i live in India and shipping the phone to mobiletechvideos and getting it fixed will cost me nearly a brand new phone..........since it is US version of s2, i cant get it fixed in India through samsung........
i need some definitive actions.....because everything i have been doing until now through research made it worse.......only life signs its showing right now is getting in to download mode with a pc connection......also smetimes i see a flicker in the bottom four keys......pls help
Click to expand...
Click to collapse
I suggest you continue trying to get to stock. Use a different stock package than the one that didn't work.
Sent from my SGH-I777 using xda premium

[SOLVED]S2 bricked?

Hello, sorry for being dumb, but this is the case.
I rooted my phone, everyone was ok, but I wanted to install a custom kernel, so I wanted to install a custom recovery, so I dowloaded ROM manager from the market and installed it, I selected to install a custom recovery, everything went ok, so I pressed to boot into recovery, and that's where it gets stuck on the S2 logo, won't go past that.
What are my options?
Back to stock via Odin - clean slate & you can then 'start again' (re-root, reinstall custom rom/kernel whatever).
Don't use Rom Manager with the SGS2 at all; it's notorious for doing what you've just experienced (you don't need it - you have CWRecovery for all your flashing/backup/restore/etc needs).
P.S - Bricked phones are exactly that; bricked. They don't boot. If a phone boots, it ain't bricked. There's no such thing as 'hard' or 'soft' bricked. It either tis or t'aint.
Thanks for replying, and good to hear that there is some hope, can you refer to any guide/tutorial of what to do exactly, I don't want to stumble upon something wrong and make things worse.
3rd thread stickied near the top in this forum.
braien334 said:
Thanks for replying, and good to hear that there is some hope, can you refer to any guide/tutorial of what to do exactly, I don't want to stumble upon something wrong and make things worse.
Click to expand...
Click to collapse
Power off. Press Volume Down + Power and it'll boot into download mode (let's hope so), and flash back to Stock 4.1.2
Then flash Siyah Kernel. It includes SuperUser and CWM.
Sent from my GT-I9100 using Tapatalk 4
MistahBungle said:
3rd thread stickied near the top in this forum.
Click to expand...
Click to collapse
Okay, thanks, will try, and will let you know the result.
Thanks a lot, works now.:good:
Good man
braien334 said:
Thanks a lot, works now.:good:
Click to expand...
Click to collapse
And don't forget to add [SOLVED] to the title of your post for other members. :good:

[Q] Anyone brick their G-Watch yet?

Just curious, as with no known method of recovering an unbootable device the risks of bricking are much higher.
BMc08GT said:
Just curious, as with no known method of recovering an unbootable device the risks of bricking are much higher.
Click to expand...
Click to collapse
How would you do that? There's nothing you can flash yet xD
spiderflash said:
How would you do that? There's nothing you can flash yet xD
Click to expand...
Click to collapse
Still possibilities. Not reading directions, randomly doesn't boot etc. Etc.
brick
seems i just did
yeah, i flashed graphene rom with the kernel thats in android dev, dont remember the name offhand. I realized that graphene wasnt updated so i tried to reset, which resulted in a soft brick because of the kernel im asssuming. I managed to flash back to stock in fastboot with the recovery tool
dougiefresh181 said:
yeah, i flashed graphene rom with the kernel thats in android dev, dont remember the name offhand. I realized that graphene wasnt updated so i tried to reset, which resulted in a soft brick because of the kernel im asssuming. I managed to flash back to stock in fastboot with the recovery tool
Click to expand...
Click to collapse
mind me asking how? I'm stuck @ the boot animation waiting for it to die then see if it takes me to recovery hopefully :/
ayuready1989 said:
mind me asking how? I'm stuck @ the boot animation waiting for it to die then see if it takes me to recovery hopefully :/
Click to expand...
Click to collapse
I used adb reboot bootloader while it was at the boot screen to boot into fastboot and then used tomsgt's lg gwatch toolkit to revert to stock, root and install recovery while in fast boot
Im soft bricked in adb sideload.. waiting for battery to dies as well, PC wont recognize the device(dosent even show in Device Manager), power off button on the back does nothing.
ayuready1989 said:
mind me asking how? I'm stuck @ the boot animation waiting for it to die then see if it takes me to recovery hopefully :/
Click to expand...
Click to collapse
Yep. Same situation here, tried flashing the Gohma Rom 1.2 and let it die a few times with no luck. It'd just try to boot again and have the little bubbles fly around endlessly. The hard reset button was no good either. I'm really hoping someone's got something.
abrarkhandoker said:
Yep. Same situation here, tried flashing the Gohma Rom 1.2 and let it die a few times with no luck. It'd just try to boot again and have the little bubbles fly around endlessly. The hard reset button was no good either. I'm really hoping someone's got something.
Click to expand...
Click to collapse
it went into recovery for me, try to use the tools once it die and u plug it up, forgot which option i used, stock seems to last just as long as the rom now
Bricked?
My lg g watch is stuck on this Spanish screen. It says: se ha detenido la apliaison android wear. I have tried everything except USB to a computer. As I don't have one. It won't connect to my phone and when it did the first time it did it wouldn't let me pull the menu out on the watch. I'm new to this whole smart watch wave and am lost. Thanks

Categories

Resources