Hello!
I have Mediatek MTK6589 Alps MS918.
Motherboard vendor: alps
Motherboard model: ratech89_we_rlk_jb2
RAM size: 464 MB
BIOS vendor: alps
CPU: ARMv7 rev2 (v7l) quad core, 1.2GHz
I rooted it...
Now, i want to install CWM Recovery and CUSTOM ROM...
Which CWM Recovery and CUSTOM ROM for this device?
I can't find it...
Thank you.
Related
Hello to all. I have a clone of the iPhone 5, which hangs in the mediatek screen.
While the phone is lit I got some information:
CPU identifier:
cpu mediatek mt6577t
smartphone type hdc iphone5
ddr ram 2Gb (1877Mb usable)
PowerVR SGX GPU 531
Factory mode:
BB Chip: MT6577
Ms Board: mobitek77_m01_ics2
kernerl ver 3.0.13
Android version 4.2.0
sw ver. ALPS ICS2 MP v1.18
Mobileuncle tools:
Processor: ARMv7 rev 0
Processor: 1
hardware MT6589
kernel 3.0.13
Product: mobitek77_m01_ics2
Manufacturer: alps
relase 4.2.0
Screen 480 * 854
The phone will then start the recovery mode (cmw). I can flesh the rom from cmw but do not know which file to flesh
I opened the phone and saw:
The mobile phone does not have a removable battery but is welded with 2 wires to the motherboard, there are no written on the cover.
The motherboard is written D09_MB_V2.2 20121126 and inside I found a memory card 8Gb
Can anyone help me riconscere the phone?
Resolved?
giga.91 said:
Hello to all. I have a clone of the iPhone 5, which hangs in the mediatek screen.
While the phone is lit I got some information:
CPU identifier:
cpu mediatek mt6577t
smartphone type hdc iphone5
ddr ram 2Gb (1877Mb usable)
PowerVR SGX GPU 531
Factory mode:
BB Chip: MT6577
Ms Board: mobitek77_m01_ics2
kernerl ver 3.0.13
Android version 4.2.0
sw ver. ALPS ICS2 MP v1.18
Mobileuncle tools:
Processor: ARMv7 rev 0
Processor: 1
hardware MT6589
kernel 3.0.13
Product: mobitek77_m01_ics2
Manufacturer: alps
relase 4.2.0
Screen 480 * 854
The phone will then start the recovery mode (cmw). I can flesh the rom from cmw but do not know which file to flesh
I opened the phone and saw:
The mobile phone does not have a removable battery but is welded with 2 wires to the motherboard, there are no written on the cover.
The motherboard is written D09_MB_V2.2 20121126 and inside I found a memory card 8Gb
Can anyone help me riconscere the phone?
Click to expand...
Click to collapse
Were you able to resolve the problem? I have a similar issue and need the following ROM for my i5 -
MS Board: MOBITEK77_M01_ICS2
Build: Thu Aug 22 2013
SW: ALPS.ICS2.MP.V1.18
Custom build: 1377134258
I own a phone with these system specs:
Model: Primo D1(Walton)
Board: gionee75_6628_gb2
Display: Primo-D1
Hardware: mt6575
Android Version: 2.3.6
Kernel Architecture: armv7I
Kernel Version: 2.6.35.7(eng.android.1363795143)
Screen Resolution: 320x480
Screen Density: 160 dpi
Total RAM: 222 MB
Internel Storage: 0.13 GB
CPU Arch.: ARM Cortex-A9
Cores: 1
Revision: r2p10
GPU Vendor: Imagination Technologies
GPU Renderer: PowerVR SGX 531
There is no OTA update for this phone. Is it possible to update the android version by flashing a custom ROM? If can then please tell me how?
Yes I'm searching for the same thing... A junior of my asked me to help him... all I got was this... maybe this works.. try at your risk..http://forum.xda-developers.com/showthread.php?t=2004264 ...this thread shows how to root and install CWM recovery... Give me thanks if i helped
how it possible? have u facebook or whatsapp?
rokrifat said:
I own a phone with these system specs:
Model: Primo D1(Walton)
Board: gionee75_6628_gb2
Display: Primo-D1
Hardware: mt6575
Android Version: 2.3.6
Kernel Architecture: armv7I
Kernel Version: 2.6.35.7(eng.android.1363795143)
Screen Resolution: 320x480
Screen Density: 160 dpi
Total RAM: 222 MB
Internel Storage: 0.13 GB
CPU Arch.: ARM Cortex-A9
Cores: 1
Revision: r2p10
GPU Vendor: Imagination Technologies
GPU Renderer: PowerVR SGX 531
There is no OTA update for this phone. Is it possible to update the android version by flashing a custom ROM? If can then please tell me how?
Click to expand...
Click to collapse
Hi, can anyone help me root GOCLEVER Tablet quantum 1010n?
Unfortunately I can not find any information on how to root this model.
The following is the specifications for this tablet:
Manufacturer: GOCLEVER
Model: QUANTUM_1010N
Brand: GOCLEVER
Board: TQ1010N
Device: QUANTUM_1010N
Hardware: mt8127
Product: TQ1010N
Serial: 0123456789ABCDEF
Installed RAM: 1 GB
SoC Model: MediaTek MT8127
Core Architecture: 4x ARM Cortex-A7 @ 1300 MHz
Manufacturing Process: 28 nm
Instruction Set: 32-bit ARMv7
CPU Revision: r0p3
CPU Cores: 4
CPU Clock Range: 598 - 1300 MHz
Screen Resolution: 1024 x 600
GPU Vendor: ARM
GPU Renderer: Mali-450 MP4
GPU Cores: 4
Android Version: 4.4.2 (KitKat)
API Level: 19
Rooted Device: No
Android ID: 99dab8c295a9a5a5
Build ID: GOCLEVER_20141219
Codename: REL
Fingerprint: GOCLEVER/TQ1010N/QUANTUM_1010N:4.4.2/GOCLEVER/1418970964:user/release-keys
ID: GOCLEVER
Incremental: vK302T
Thanx for help!
??? help
Download Kingo Root from official site. I rooted my Quantum 1010n in 15 seconds with this good app
Needed custom recovery For the device Karbonn Titanium Machfive
Specifications:
Resolution : 720 pixels by 1280 pixels [293 ppi]
Processor : 1.3GHz quad-core Cortex-A7 MediaTek MT6582 processor
OS: Android 5.0
GPU : ARMv7 Mali400-MP2, 500MHz
Thanks in Advance.. If anyone is willing to help.
Hi everyone,
I have an old tablet/phone that I would like to try to reuse.
Tablet 7" Model:SmartPad7503G
Brand: Mediacom
ARM Cortex-A9 1 core Rev.r2p10
Board: yecon75_tb_ics "alps"
Display: Mediacom M-MP7503G Ver 4.10 (1024x552, 160 dpi)
GPU: Immagination technologies PowerVR SGX531
Hardware: mt6575
Android 4.0.4
Kernel Architeture: arm7l
Kernel Version 3.0.13 (eng.hcl.1355360860)
I would like to try to install suitable TWRP and also the possibly to install a custom rom.
The firmware update I downloaded is available on the Mediacom website.
I would be very pleased if someone can give me some indication on how to operate.
Thanks in advance.