I'm trying to port CM10.1 to a new device. Currently I got a successful buld with fully working recovery. The rom actually doesn/t boot/ As far as I can see from the log it fails on SurfaceFlinger.
Could someone experinced in porting please take a look at my boot log here https://gist.github.com/AlexBokhankovich/6224190 and suggest what should I try.
All device specific repos can be found there https://github.com/AlexBokhankovich?tab=repositories
P.S. the device is MSM8960 board, pretty similar to HTC Evita.
rebuilt with
BOARD_HAVE_OLD_ION_API := true
BOARD_EGL_NEEDS_LEGACY_FB := true
and got the following errors.
Does anyone ever faced these?
Code:
D/libEGL ( 646): loaded /system/lib/egl/libEGL_adreno200.so
D/libEGL ( 646): loaded /system/lib/egl/libGLESv1_CM_adreno200.so
D/libEGL ( 646): loaded /system/lib/egl/libGLESv2_adreno200.so
I/Adreno200-EGL( 646): <qeglDrvAPI_eglInitialize:269>: EGL 1.4 QUALCOMM build: (CL3357771)
I/Adreno200-EGL( 646): Build Date: 03/07/13 Thu
I/Adreno200-EGL( 646): Local Branch: JB_REL_RB4.04.01.02.16.114
I/Adreno200-EGL( 646): Remote Branch:
I/Adreno200-EGL( 646): Local Patches:
I/Adreno200-EGL( 646): Reconstruct Branch:
W/Trace ( 646): error opening trace file: No such file or directory (2)
E/qdmemalloc( 327): ION_IOC_ALLOC failed with error - No such device
W/qdmemalloc( 327): Falling back to system heap
E/qdmemalloc( 327): ION_IOC_ALLOC failed with error - No such device
E/gralloc ( 327): gralloc failed err=No such device
W/GraphicBufferAllocator( 327): WOW! gralloc alloc failed, waiting for pending frees!
E/qdmemalloc( 327): ION_IOC_ALLOC failed with error - No such device
W/qdmemalloc( 327): Falling back to system heap
E/qdmemalloc( 327): ION_IOC_ALLOC failed with error - No such device
E/gralloc ( 327): gralloc failed err=No such device
W/GraphicBufferAllocator( 327): alloc(720, 1280, 2, 00000b03, ...) failed -19 (No such device)
E/SurfaceFlinger( 327): GraphicBufferAlloc::createGraphicBuffer(w=720, h=1280) failed (No such device), handle=0x0
E/BufferQueue( 327): [BootAnimation] dequeueBuffer: SurfaceComposer::createGraphicBuffer failed
Related
hi everybody
i need help with this logcat.
i really need help right now
main problem is here
Code:
I/Netd ( 2153): Netd 1.0 starting
W/InterfaceController( 2153): Warning (Cannot load library: load_library(linker.
cpp:771): library "/system/lib/libnetcmdiface.so" not found) while opening the n
et interface command library
D/libEGL ( 2151): loaded /system/lib/egl/libEGL_adreno200.so
D/libEGL ( 2151): loaded /system/lib/egl/libGLESv1_CM_adreno200.so
D/libEGL ( 2151): loaded /system/lib/egl/libGLESv2_adreno200.so
I/Adreno200-EGL( 2151): <qeglDrvAPI_eglInitialize:294>: EGL 1.4 QUALCOMM build:
AU_LINUX_ANDROID_JB.04.01.01.00.036_msm8960_JB_CL2644550_release_AU (CL2644550)
I/Adreno200-EGL( 2151): Build Date: 07/31/12 Tue
I/Adreno200-EGL( 2151): Local Branch:
I/Adreno200-EGL( 2151): Remote Branch: quic/master
I/Adreno200-EGL( 2151): Local Patches: NONE
I/Adreno200-EGL( 2151): Reconstruct Branch: AU_LINUX_ANDROID_JB.04.01.01.00.036
+ NOTHING
E/Trace ( 2151): error opening trace file: No such file or directory (2)
D/memalloc( 2143): init_pmem_area: Initializing pmem area
D/memalloc( 2143): init_pmem_area_locked: Opening master pmem FD
D/memalloc( 2143): init_pmem_area_locked: Total pmem size: 18874368
E/Netd ( 2153): exec() res=65280 for /system/bin/iptables -t filter -N oem_ou
t
E/Netd ( 2153): exec() res=65280 for /system/bin/ip6tables -t filter -N oem_o
ut
F/libc ( 2225): Fatal signal 7 (SIGBUS) at 0x400c32d0 (code=2), thread 2225 (
iptables)
I/Netd ( 2229): Netd 1.0 starting
W/InterfaceController( 2229): Warning (Cannot load library: load_library(linker.
cpp:771): library "/system/lib/libnetcmdiface.so" not found) while opening the n
et interface command library
D/MDnsDS ( 2229): MDnsSdListener::Hander starting up
D/MDnsDS ( 2229): MDnsSdListener starting to monitor
D/MDnsDS ( 2229): Going to poll with pollCount 1
D/libc ( 1667): pt_debug : pthread_create->start_routine= 0xf4dd, tls=0x406f
9f00, arg=0xed5680
D/libc ( 1667): pt_debug : __thread_entry->func= 0xf4dd
D/libc ( 1667): , tls=0x406f9f00, arg=0xed5680
I/Netd ( 2443): Netd 1.0 starting
W/InterfaceController( 2443): Warning (Cannot load library: load_library(linker.
cpp:771): library "/system/lib/libnetcmdiface.so" not found) while opening the n
et interface command library
I/DEBUG ( 1505): timed out waiting for tid=2151 to die
I/DEBUG ( 1505): ptrace detach from 2151 failed: No such process
I/DEBUG ( 1505): debuggerd committing suicide to free the zombie!
I/DEBUG ( 2503): debuggerd: Jul 3 2013 11:35:05
D/MDnsDS ( 2443): MDnsSdListener::Hander starting up
D/MDnsDS ( 2443): MDnsSdListener starting to monitor
D/MDnsDS ( 2443): Going to poll with pollCount 1
Hello
I've compiled CM10 rom with 3.4 kernel for my Xperia and everything works except one thing:
Display doesn't work at all. It has backlight (it stays grey) but doesn't display any pixels.
Here is part of logcat which includes the error:
Code:
E/memalloc( 173): /dev/pmem: Failed to open pmem device: No such file or directory
E/memalloc( 173): /dev/pmem: failed to initialize pmem area
E/gralloc ( 173): gralloc failed err=No such file or directory
W/GraphicBufferAllocator( 173): alloc(480, 854, 2, 00000b03, 0 ...) failed -2 (No such file or directory)
E/SurfaceFlinger( 173): GraphicBufferAlloc::createGraphicBuffer(w=480, h=854) failed (No such file or directory), handle=0x0
E/BufferQueue( 173): [<pid_369>] dequeueBuffer: SurfaceComposer::createGraphicBuffer failed
W/Adreno200-EGLSUB( 369): <DequeueBuffer:420>: dequeue native buffer fail: No such file or directory
E/gralloc ( 173): gralloc failed err=No such file or directory
W/GraphicBufferAllocator( 173): alloc(480, 854, 2, 00000b03, 0 ...) failed -2 (No such file or directory)
E/SurfaceFlinger( 173): GraphicBufferAlloc::createGraphicBuffer(w=480, h=854) failed (No such file or directory), handle=0x0
E/BufferQueue( 173): [<pid_369>] dequeueBuffer: SurfaceComposer::createGraphicBuffer failed
W/Adreno200-EGLSUB( 369): <DequeueBuffer:420>: dequeue native buffer fail: No such file or directory
E/gralloc ( 173): gralloc failed err=No such file or directory
W/GraphicBufferAllocator( 173): alloc(480, 854, 2, 00000b03, 0 ...) failed -2 (No such file or directory)
E/SurfaceFlinger( 173): GraphicBufferAlloc::createGraphicBuffer(w=480, h=854) failed (No such file or directory), handle=0x0
E/BufferQueue( 173): [<pid_369>] dequeueBuffer: SurfaceComposer::createGraphicBuffer failed
W/Adreno200-EGLSUB( 369): <DequeueBuffer:420>: dequeue native buffer fail: No such file or directory
W/Adreno200-EGL( 369): <qeglDrvAPI_eglMakeCurrent:2850>: EGL_BAD_ALLOC
E/libEGL ( 369): eglMakeCurrent:536 error 3003 (EGL_BAD_ALLOC)
I understand only basics of those things, can anyone help me?
I've made following patches in my qcom_display:
1
2
3
4
but it didn't help. Screen stays black also in CWM. When I flash 3.0.8 kernel everthing works normally.
I'm using stock kernel source.
Do you think I should compare my defconfig with one used by FXP team?
lozohcum said:
Hello
....
I'm using stock kernel source.
Do you think I should compare my defconfig with one used by FXP team?
Click to expand...
Click to collapse
I know it has been a while but this turned up on google and I had a similar error.. I think the cause may be further up in the logcat, looks like pmem failed to initialize...
Nz
How can i reuse or reset gralloc register buffer memory in android rooted or non root
0 down vote favorite
I am building a player in which I have to run flash content, after some time my application crashes and give gralloc register buffer error, below is the complete description of my error
E/Gralloc-3X-ERROR: int gralloc_register_buffer(const gralloc_module_t*, buffer_handle_t):135 Failed to create UMP handle 0x0 E/Gralloc-3X-ERROR: int gralloc_register_buffer(const gralloc_module_t*, buffer_handle_t):135 Failed to create UMP handle 0x0 W/GraphicBufferMapper(14231): registerBuffer(0x7233a148) failed -22 (Invalid argument) W/GraphicBufferMapper(14231): registerBuffer(0x7233a148) failed -22 (Invalid argument) E/GraphicBuffer(14231): unflatten: registerBuffer failed: Invalid argument (-22) E/GraphicBuffer(14231): unflatten: registerBuffer failed: Invalid argument (-22) F/libc (14231): Fatal signal 11 (SIGSEGV) at 0x4570e000 (code=2), thread 14385 (FP_DoPlay) F/libc (14231): Fatal signal 11 (SIGSEGV) at 0x4570e000 (code=2), thread 14385 (FP_DoPlay)
Please help me in removing this error or can my app reuses or reset the same gralloc buffer for rendering the flash content
The problem is that the /dev filesystem hasn't been populated yet or never was populated.
I'm presuming udev or a non-functioning driver.
http://stackoverflow.com/questions/18175989/android-memalloc explains the predicament @lozohcum
Fixed it yet, @lozohcum?
Remember:
/dev/pmem => Physical Memory
BTW, is the M2 a good phone? I'm looking in to it.
Somehow last night my phone (Galaxy S4 running AOSP 4.4.2) crashed and now it wont reboot. It just sticks on the screen with the four colours animation for ever. I tried deleting the Cache, and Davilik Cache but it has not fixed the problem .. after this is went through the Upgrading Android process for all the apps but then stuck on "Starting Apps" .. so pretty clearly some application is starting and has a problem and so my phone wont boot .. but is there anyway of finding out which application it is?? Im aware I can wipe data and start again but would like to solve the problem without this if its possible. I also tried re-flashing my ROM but it didnt help.
Thanks for any help in advance.
If it helps anybody help me, I plugged my phone into usb while it is stuck in the bootloop and ran
adb logcat *:E .. here is the result
--------- beginning of /dev/log/system
--------- beginning of /dev/log/main
E/DataRouter( 198): USB Interface is open with 0x9
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 1 of 10
E/macloader( 210): CID info file will be created!!!
E/wcnss_service( 221): CAL file not found
E/wcnss_service( 221): Failed to open wcnss device : No such file or directory
E/mm-camera( 211): qcamsvr_start: old_mode = 3f
E/INSTHK ( 249): Checked...
E/PPDaemon( 217): Failed to open the config file!
E/PPDaemon( 217): Panel type: 8
E/rmt_storage( 223): Remote storage service is not supported on mdm target
E/AT_Distributor( 212): Failed to init ATD
E/mm-camera( 211): qcamsvr_load_gesture_lib Error opening gesture library
E/mm-camera( 211): Cannot init Gesture library
E/mm-camera( 211): camera_plugin_create_func: handle = 0xb6c10008, client_open_fn = 0xb6c0d565, destroy_fn = 0xb6c0db99
E/QC-time-services( 220): Daemon:genoff_boot_tod_init: Unable to set TOD at boot up
E/QC-time-services( 220): Daemon: Unable to set TOD at boot up
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
E/Diag_Lib( 195): Diag_LSM_Init: Failed to open handle to diag driver, error = 13
E/QCNEA ( 214): CnE Standard Version 4.01
E/QCNEA ( 214): CnE Pro Version 1.01
E/QCNEA ( 214): Cne WQE Version 0.1
E/QCNEA ( 214): Cne NSRM Version 1.01
E/Sensorhubs( 207): couldn't find 'ssp_context' input device
E/Sensorhubs( 207): SSPContext: open sensorhub device failed(-1)
E/PRDrmPlugIn( 202): PRDrmPlugin:RDrmPlugin
E/PRDrmPlugInImp( 202): PRDRMPluginAPI::create
E/PRDrmPlugInImp( 202): PRDRMPluginAPI::SetEventHandler
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 2 of 10
E/PRDrmPlugIn( 202): PRDrmPlugin:nGetSupportInfo, uniqueId = 0
E/Sensorhubs( 207): couldn't find 'gesture_sensor' input device
E/MediaPlayerFactory( 203): calling dlopen on FACTORY_LIB
E/MediaPlayerFactory( 203): calling dlsym on pFactoryLib for FACTORY_CREATE_FN
E/MediaPlayerFactory( 203): registering DASH Player factory...
E/QualcommCamera( 203): Qint android::get_number_of_cameras(): E
E/alsa_mixer( 203): Control open failed
E/ ( 203): [ACDB RTC]->rtc init done!->result [0]
E/Diag_Lib( 203): actp_diag_init: call diag init function with B50181DD
E/ ( 203): [ACDB ACPH]->actp diag init done!
E/ACDB-LOADER( 203): done with conversion, anc config size is 148
E/ACDB-LOADER( 203): done with conversion, anc config size is 148
E/ACDB-LOADER( 203): done with conversion, anc config size is 148
E/ACDB-LOADER( 203): done with conversion, anc config size is 148
E/ACDB-LOADER( 203): done with conversion, anc config size is 74
E/ACDB-LOADER( 203): done with conversion, anc config size is 74
E/AndroidRuntime( 201): cannot open customer xml file
E/AndroidRuntime( 201): /system/csc/customer.xml can't open file
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 3 of 10
E/ICD ( 194): There is no file or permission.
E/BootAnimation( 613): Could not open '/sys/devices/w1_bus_master1/w1_master_check_id'
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 4 of 10
E/EmojiFactory_jni( 201): Failed to load libemoji.so: dlopen failed: library "libemoji.so" not found
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 5 of 10
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 6 of 10
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 7 of 10
E/Sensors ( 768): getName gyro_sensor name file open error.
E/GyroSensor( 768): GyroSensor : getName of gyro_sensor failed.
E/TemperatureHumiditySensor( 768): Failed to open send_accuracy sysfs
E/Sensors ( 768): sensors__get_sensors_list gyro_sensor name file open error.
E/MagneticSensor( 768): enable, 122, data_fd = -1
E/GyroSensor( 768): enable, 148, data_fd = -1
E/TemperatureHumiditySensor( 768): enable, 216, data_fd = -1
E/TemperatureHumiditySensor( 768): enable, 216, data_fd = -1
E/Sensors ( 768): sensors__get_sensors_list gyro_sensor name file open error.
E/Sensors ( 768): sensors__get_sensors_list gyro_sensor name file open error.
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 8 of 10
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 9 of 10
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 10 of 10
E/kickstart-qcks( 226): '/dev/mdm' was not found
E/kickstart-qcks( 226): ERROR: Can't bring MDM9K out of reset
E/alsa_ucm( 203): EC_REF_RX mixer ctl: SLIM_RX
E/alsa_ucm( 203): EC_REF_RX mixer ctl: SLIM_RX
E/alsa_ucm( 203): EC_REF_RX mixer ctl: SLIM_RX
E/alsa_ucm( 203): EC_REF_RX mixer ctl: SLIM_RX
E/alsa_mixer( 203): Control open failed
E/ ( 203): csd_client_service_init: Invalid rx device 0, setting to handset
E/ ( 203): csd_client_service_init: Invalid tx device 0, setting to handset
E/alsa_ucm( 203): Invalid current verb value: Inactive - -1
E/alsa_ucm( 203): No valid device Speaker found
E/alsa_ucm( 203): Control device not initialized
E/alsa_ucm( 203): Control device not initialized
E/alsa_pcm( 203): cannot open device '/dev/snd/pcmC0D0p', errno 2
E/ALSADevice( 203): open: Failed to initialize ALSA device 'hw:0,0'
E/AudioHardwareALSA( 203): Device open failed
E/QMI_FW ( 203): xport_open: socket creation failed - 1
E/AudioPolicyManagerBase( 203): Not output found for attached devices 00000003
E/AudioPolicyManagerBase( 203): Failed to open primary output
E/AudioPolicyManagerBase( 203): getDeviceForStrategy() speaker device not found for STRATEGY_SONIFICATION
E/AudioPolicyManagerBase( 203): getDeviceForStrategy() speaker device not found for STRATEGY_SONIFICATION
E/Audio_Control_CSC( 203): /system/csc/sales_code.dat ==> cannot open file
E/AudioPolicyService( 203): couldn't init_check the audio policy (No such device)
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init:retry count exceeds limitQMI init failed continuing withoutserver
E/QC-time-services( 220): Daemon: QMI init failed, QMI calls inactive
E/QC-time-services( 220): Daemon: Time-services: Waiting to acceptconnection
E/QMI_FW ( 203): QMUXD: Service_id=20 not found over conn_id=0
E/QMI_FW ( 203): QMUXD: Service_id=20 not found over conn_id=18
E/QMI_FW ( 203): QMUXD: Service_id=20 not found over conn_id=37
E/QMI_FW ( 203): open_lookup_sock_fd: Lookup sock fd creation failed
E/QMI_FW ( 203): QMUXD: Service_id=20 not found over conn_id=0
E/QMI_FW ( 203): QMUXD: Service_id=20 not found over conn_id=18
E/QMI_FW ( 203): QMUXD: Service_id=20 not found over conn_id=37
E/SensorHubManager( 768): JNI: sensorhubs_get_next_module: getSensorHubList: count= 2
E/SensorHubManager( 768): JNI: sensorhubs_get_next_module: getSensorHubList: count= 2
E/SensorHubManager( 768): JNI: sensorhubs_enabledisable: delay= 0
E/EventHub( 768): could not get driver version for /dev/input/mice, Not a typewriter
E/ConnectivityService( 768): Error in networkAttributes - ignoring attempt to define type 17
E/ConnectivityService( 768): Ignoring protectedNetwork 14
E/MobileDataStateTracker( 768): default: Ignoring feature request because could not acquire PhoneService
E/MobileDataStateTracker( 768): default: Could not enable APN type "default"
F/SystemServer( 768): BOOT FAILURE Creating Connectivity Engine Service
F/SystemServer( 768): java.lang.ClassNotFoundException: Didn't find class "com.quicinc.cne.CNE" on path: DexPathList[[],nativeLibraryDirectories=[/vendor/lib, /system/lib]]
F/SystemServer( 768): at dalvik.system.BaseDexClassLoader.findClass(BaseDexClassLoader.java:56)
F/SystemServer( 768): at java.lang.ClassLoader.loadClass(ClassLoader.java:497)
F/SystemServer( 768): at java.lang.ClassLoader.loadClass(ClassLoader.java:457)
F/SystemServer( 768): at com.android.server.ServerThread.initAndLoop(SystemServer.java:572)
F/SystemServer( 768): at com.android.server.SystemServer.main(SystemServer.java:1263)
F/SystemServer( 768): at java.lang.reflect.Method.invokeNative(Native Method)
F/SystemServer( 768): at java.lang.reflect.Method.invoke(Method.java:515)
F/SystemServer( 768): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:1264)
F/SystemServer( 768): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:1080)
F/SystemServer( 768): at dalvik.system.NativeStart.main(Native Method)
E/SystemServer( 768): Failed to load CNE class
E/SystemServer( 768): java.lang.ClassNotFoundException: Didn't find class "com.quicinc.cne.CNE" on path: DexPathList[[],nativeLibraryDirectories=[/vendor/lib, /system/lib]]
E/SystemServer( 768): at dalvik.system.BaseDexClassLoader.findClass(BaseDexClassLoader.java:56)
E/SystemServer( 768): at java.lang.ClassLoader.loadClass(ClassLoader.java:497)
E/SystemServer( 768): at java.lang.ClassLoader.loadClass(ClassLoader.java:457)
E/SystemServer( 768): at com.android.server.ServerThread.initAndLoop(SystemServer.java:572)
E/SystemServer( 768): at com.android.server.SystemServer.main(SystemServer.java:1263)
E/SystemServer( 768): at java.lang.reflect.Method.invokeNative(Native Method)
E/SystemServer( 768): at java.lang.reflect.Method.invoke(Method.java:515)
E/SystemServer( 768): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:1264)
E/SystemServer( 768): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:1080)
E/SystemServer( 768): at dalvik.system.NativeStart.main(Native Method)
E/wpa_supplicant( 1981): wpa_driver_nl80211_driver_cmd: failed to issue private commands
E/WifiStateMachine( 768): Unexpected BatchedScanResults :null
E/wpa_supplicant( 1981): wpa_driver_nl80211_driver_cmd: failed to issue private commands
E/ActivityManager( 768): Attempt to launch receivers of broadcast intent Intent { act=android.net.ConnectivityService.action.PKT_CNT_SAMPLE_INTERVAL_ELAPSED flg=0x4 (has extras) } before boot completion
Hello, here is my problem,
I have always ported the miui rom to my thl w200 device.
in the latest builds, after porting it to my phone I get stuck at bootlogo.
I did a logcat but cant really find what causes this.
someone can look at it and help me?
--------- beginning of /dev/log/main
I/Resize ( 86): The size of data already meet the request.
I/Resize ( 86): Partition has been resized,so nothing to do!
D/ADB_SERVICES( 158): install_listener('tcp:5037','*smartsocket*')
D/ADB_SERVICES( 158): adb_main(): pre init_jdwp()
D/ADB_SERVICES( 158): adb_main(): post init_jdwp()
D/ADB_SERVICES( 158): Event loop starting
D/ADB_SERVICES( 158): transport: 0xf67520 init'ing for usb_handle 0xf67498 (sn='')
I/ADB_SERVICES( 158): transport: usb
D/ADB_SERVICES( 158): transport: (null) registered
D/ADB_SERVICES( 158): transport: (null) (16,17) starting
W/ADB_SERVICES( 158): (null): starting transport input thread, reading from fd 17
W/ADB_SERVICES( 158): (null): starting transport output thread on fd 17, SYNC online (2)
D/ADB_SERVICES( 158): recv: SYNC 00000001 00000002 0000
W/ADB_SERVICES( 158): (null): transport SYNC online
E/ccci_mdinit(0)( 121): md_init ver:1.00
E/ccci_mdinit(0)( 120): md_init ver:1.00
I/6620_launcher( 117): open device node succeed.(Node:/dev/stpwmt, fd:3)
I/6620_launcher( 117): keypersist.mtk.wcn.combo.chipid)-value0x6628),chipId:0x6628
I/6620_launcher( 117): index:1, chipId:0x6628
I/6620_launcher( 117): chiId:0x6628
I/6620_launcher( 117): index:1, chipId:0x6628
I/6620_launcher( 117): set chipId(0x6628) to HIF-SDIO module
I/6620_launcher( 117): Info:key:mt6620.defAnt value:mt6620_ant_m3.cfg
I/6620_launcher( 117): Info:key:mt6628.defAnt value:mt6628_ant_m1.cfg
I/6620_launcher( 117): NULL is returned, eighter EOF or error maybe found
I/6620_launcher( 117): close /system/etc/firmware/WMT.cfg succeed
I/6620_launcher( 117): index:1, chipId:0x6628
I/6620_launcher( 117): STP Mode is not set, fetching default mode...
I/6620_launcher( 117): chipId(0x6628), default Mode(1), strlen(gWmtCfgName)(39), wmtCfgFile(/system/etc/firmware//mt6628_ant_m1.cfg)
I/6620_launcher( 117): HifConfig:0x0001, wmtCfgFile:/system/etc/firmware//mt6628_ant_m1.cfg
I/6620_launcher( 117): keyro.build.type)-valueuser)
I/6620_launcher( 117): MCU patch folder path: /system/etc/firmware/
I/6620_launcher( 117): Common Interface: UART mode
I/6620_launcher( 117): MCU patch folder path: /system/etc/firmware/
I/6620_launcher( 117): Common Interface: UART mode
I/6620_launcher( 117): uart name ttyMT2
D/MsensorDaemon( 151): Msensor deamon statr!!!!!!!!!!!!
D/MsensorDaemon( 151): msensor demon start process detect demon name = memsicd3416x
D/MsensorDaemon( 151):
D/MsensorDaemon( 151): msensor demon start process detect demon prop = init.svc.memsicd3416x
D/MsensorDaemon( 151):
D/MsensorDaemon( 151): start_msensor_demon
D/MsensorDaemon( 151): HAVE_LIBC_SYSTEM_PROPERTIES
E/MsensorDaemon( 151): [99] ''
D/permission_check( 145): permission check ver:0.01
D/permission_check( 145): Empty, not decrypt!
D/permission_check( 145): change_md_nvram_attr++
--------- beginning of /dev/log/system
E/POAD ( 155): boot_mode = 0
E/POAD ( 155): update boot reason = 0
D/permission_check( 145): new_ver file exist!!!
D/permission_check( 145): change_md_nvram_attr--0
I/stp_dump( 143): ==>main
I/stp_dump( 143): stp_dump_ctrl_iface_trace_logger_sendto_fd succeed
E/stp_dump( 143): [STP_DBG] family id = 19
I/stp_dump( 143): sending dummy command
I/stp_dump( 143): set sock number to 9
I/stp_dump( 143): addr.sun_path:stp_DIR=/data/misc/stp_dump GROUP=stp
I/stp_dump( 143): Using existing control interface directory.
E/stp_dump( 143): mkdir (/data/misc/stp_dump) succeed
I/stp_dump( 143): ctrl_interface_group=1000 (from group name 'stp')
I/stp_dump( 143): chown (/data/misc/stp_dump) succeed
I/stp_dump( 143): CTRL: chmod[/data/misc/stp_dump] succeed
E/stp_dump( 143): ctrl_iface bind(PF_UNIX) failed: Address already in use
E/stp_dump( 143): ctrl_iface exists, but does not allow connections - assuming it was leftover from forced program termination
D/stp_dump( 143): Successfully replaced leftover ctrl_iface socket '/data/misc/stp_dump/stpd'
I/stp_dump( 143): set sock number to 10
I/stp_dump( 143): stp_dump_ctrl_iface_init succeed.
I/stp_dump( 143): ==>main222
I/busybox ( 114): run-parts: /system/etc/init.d: No such file or directory
D/wlanLoader( 144): checkSupport 0x6628
D/wlanLoader( 144): Match 0x6628
D/wlanLoader( 144): Get the correct chip version mt6628
D/wlanLoader( 144): Get chip Version mt6628.
D/wlanLoader( 144): DRIVER_MODULE_PATH is /system/lib/modules/wlan_mt6628.ko
D/MsensorDaemon( 151): HAVE_LIBC_SYSTEM_PROPERTIES
D/MsensorDaemon( 151): memsicd3416x running
D/MsensorDaemon( 151): Msensor deamon2 statr!!!!!!!!!!!!
D/MsensorDaemon( 151): open demon attr err = No such file or directory
E/stp_dump( 143): table == NULL || table->table == NULL
E/stp_dump( 143): table == NULL || table->table == NULL
D/wlanLoader( 144): Success to insmod the /system/lib/modules/wlan_mt6628.ko
I/thermal_repeater( 154): START+++++++++ 154
I/thermal_repeater( 154): Success to write 154 to /proc/wmt_tm/tm_pid
I/thermal_repeater( 154): Fail to chmod ffffffff
I/thermal_repeater( 154): Enter infinite loop
I/AEE/AED ( 122): Built Jan 30 2013 19:35:15
D/AEE/AED ( 122): ChangeAEEWorkMode: 3
I/AEE/AED ( 122): AED config
I/AEE/AED ( 122): mode '3'
I/AEE/AED ( 122): exp level '1
I/AEE/AED ( 122): dal enable '0'
I/AEE/AED ( 122): db count '20'
I/AEE/AED ( 122): db storage '1'
I/AEE/AED ( 122): SMP Info => 1
I/MobileLogD( 123): [void change_permission()] set mobile_log_d is in root user, adjust caps for its thread
I/MobileLogD( 123): mobilelog start after boot, mode:0
D/MobileLogD/cache( 123): init cache configure items....
D/MobileLogD/cache( 123): value of ro.build.type:user.
I/installd( 140): installd firing up
D/PQ ( 130): PQ init start...
D/PQ ( 130): PQ test...
I/ ( 137): ServiceManager: 0x41661698
D/PQ ( 130): PQ init end !
E/AEE/LIBAEE( 122): Can't remove file /sdcard/mtklog/aee_exp/temp: No such file or directory
E/AEE/LIBAEE( 122): Can't remove file /data/aee_exp/temp: No such file or directory
V/AEE/AED ( 122): ETB buffer length = 512
I/AEE/AED ( 122): wdt_status = 2, fiq_step=0
I/AEE/AED ( 122): reboot_reason = 0
V/AEE/AED ( 122): ETM start
D/installd( 140): LBE is enabled, starting...
D/NVRAM ( 152): NvRAMAgent created
E/NVRAM ( 152): Haman, serviceManager work well
D/NVRAM ( 152): NvRAMAgent Service is now ready
I/DPFD ( 149): [DPFD] main start ...
I/DPFD ( 149): [DPFD] set priority to RR:268435540
I/DPFD ( 149): [int adjustPriority()] set dpfd is in root user, adjust caps for its thread
D/DPFD ( 149): [DPFD] Wait Request.....
I/DMAgent ( 147): DMAgent created
I/DMAgent ( 147): [DMAgent]register OK.
D/DMAgent ( 147): DMAgent Service is now ready
D/MobileLogD( 123): write "mobilelog start after boot, mode:0" to mblog
E/installd( 140): Failed to load liblbesec.so
I/installd( 140): add service shelld success!
W/installd( 140): service start entry 'shelld', flag :0
W/installd( 140): starting 'shelld'
E/ccci_fsd(0)( 118): md_fsd Ver:v1.00
I/Hald ( 133): Hald 1.1011 starting
D/ccci_fsd(1)( 118): /dev/ccci_fs is opend(600).
D/ccci_fsd(1)( 118): Check OTP...
D/Hald ( 133): Create ResetManager
D/Hald ( 133): Size of initial message: 6
D/Hald ( 133): [MTK_WIFI] family id = 20
D/Hald ( 133): Reset Manager Prepare Dummy command
D/Hald ( 133): Reset Manager Send Command for binding
D/Hald ( 133): Start ResetManager
E/ccci_fsd(0)( 119): md_fsd Ver:v1.00
E/ccci_fsd(2)( 119): /dev/ccci2_fs is not enabled(2).
D/MobileLogD/cache( 123): config autostart=0 same as current value
D/MobileLogD/cache( 123): config logpath=/mnt/sdcard same as current value
D/MobileLogD/cache( 123): config logsize=300 same as current value
D/MobileLogD/cache( 123): config AndroidLog=1 same as current value
D/MobileLogD/cache( 123): config KernelLog=1 same as current value
D/MobileLogD/cache( 123): config BTLog=1 same as current value
D/MobileLogD/cache( 123): config BTLog=1 same as current value
E/MobileLogD/cache( 123): cant get true log path through property
E/MobileLogD/cache( 123): true path is /mnt/sdcard
D/MobileLogD( 123): create local socket server success
D/Vold ( 116): Check whether nvram restore ready!
D/NVRAM ( 128): g_i4CFG_File_Count: 25
D/NVRAM ( 128): NVM_Init Max Lid: 43
D/NVRAM ( 128): Total nvram Lid number is 43
I/Netd ( 125): Netd 1.0 starting
W/InterfaceController( 125): Warning (Cannot load library: load_library(linker.cpp:745): library "/system/lib/libnetcmdiface.so" not found) while opening the net interface command library
D/agps ( 142): [agps] WARNING: [Main] mtk_agpsd is running ver=0.46
D/agps ( 142): [agps] WARNING: [Main] mkdir failure for /data/agps_supl/log reason=[File exists]
D/MtkAgpsNative( 142): SuplRawLog.bEnable:0
D/MtkAgpsNative( 142): SuplRawLog.szPath:/sdcard
D/MtkAgpsNative( 142): SuplRawLog.szFile:agps_raw.log
D/MtkAgpsNative( 142): SuplSslLog.bEnable:0
D/MtkAgpsNative( 142): SuplSslLog.szPath:/sdcard
D/MtkAgpsNative( 142): SuplSslLog.szFile:agps_ssl.log
I/MtkAgpsNative( 142): Enter up_int_init
I/MtkAgpsNative( 142): Enter mtk_agps_up_init
D/MtkAgpsNative( 142): FS_CreateDir: /data/agps_supl
W/MtkAgpsNative( 142): -> errno(EEXIST) => dir already exists
D/MtkAgpsNative( 142): ############ mtk_agps_up_init --> agps_disable_enalbe_times = 1 ############
Click to expand...
Click to collapse
Hello for all
I have compiled miui 7 for grand 2
Based on cm11 credit to aapav01
And compiled with patchrom miui v7 base
now after flash the rom it stuck on miui logo.
the issue with updater cript
Missing some symalink and permission.
I go to recompile the rom from zero now.
And see waht i going
Sorry for mi bad english.
I some one want help me
So ok
Envoyé de mon SM-G900H en utilisant Tapatalk
Thanks for your work
1st- miui 7 released yesterday withe beta version
So how is it possible to release patchrom in same day?
2nd-it is based on 5.1.1 lollipop......I do not think that it is working with kitkat
Try to base it on with 5.1.1 lollipop
Or use another update script from another device like moto g it has miui rom
Good luck
Hammoud Abbas said:
Thanks for your work
1st- miui 7 released yesterday withe beta version
So how is it possible to release patchrom in same day?
2nd-it is based on 5.1.1 lollipop......I do not think that it is working with kitkat
Try to base it on with 5.1.1 lollipop
Or use another update script from another device like moto g it has miui rom
Good luck
Click to expand...
Click to collapse
Miui 7 is based on kitkat
I managed the updatr script and reflashed the rom
booted and stuck on mi logo.
Envoyé de mon SM-G900H en utilisant Tapatalk
buggaty said:
Miui 7 is based on kitkat
I managed the updatr script and reflashed the rom
booted and stuck on mi logo.
Envoyé de mon SM-G900H en utilisant Tapatalk
Click to expand...
Click to collapse
can you upload the rom to try withe you?
buggaty said:
Miui 7 is based on kitkat
I managed the updatr script and reflashed the rom
booted and stuck on mi logo.
Envoyé de mon SM-G900H en utilisant Tapatalk
Click to expand...
Click to collapse
If the issue is with the updater script or binary then tell me the rom components ie all parts like which things are included and which folder I will try to make a flashable zip for you
I uplaod the rom this night
But just for dev
For testing and help for these issue
Envoyé de mon SM-G900H en utilisant Tapatalk
if you want for help and makin this rom @Hammoud Abbas @gracefang
Envoyé de mon SM-G900H en utilisant Tapatalk
buggaty said:
if you want for help and makin this rom @Hammoud Abbas @gracefang
Envoyé de mon SM-G900H en utilisant Tapatalk
Click to expand...
Click to collapse
Kindly pm me the link I will download tomorrow or the next day as um busy right now and I asked for pm as many people will flash it and say it has issues or stuff so it's better to fix it then give link in public
So this rom will launch soon? Or what!
gracefang said:
Kindly pm me the link I will download tomorrow or the next day as um busy right now and I asked for pm as many people will flash it and say it has issues or stuff so it's better to fix it then give link in public
Click to expand...
Click to collapse
I upload now and i pm you the link
Chek the framewok.jar and services.jar i think the issue is these
I have succefull recompiled but still issue in these
Envoyé de mon SM-G900H en utilisant Tapatalk
Devel0per95 said:
So this rom will launch soon? Or what!
Click to expand...
Click to collapse
It will launch soon
Just be patient -_-
Rebuild rom and i fount issue with the framework and kernel mal patched.
8.144236] mdss_dsi_cmdlist_rx: No rx buffer provided
[ 8.177771] mdss_dsi_cmdlist_rx: No rx buffer provided
[ 8.211106] mdss_dsi_cmdlist_rx: No rx buffer provided
[ 8.244437] mdss_dsi_cmdlist_rx: No rx buffer provided
[ 8.277776] mdss_dsi_cmdlist_rx: No rx buffer provided
[ 8.311107] mdss_dsi_cmdlist_rx: No rx buffer provided
[ 8.344440] mdss_dsi_cmdlist_rx: No rx buffer provided
[ 8.377770] mdss_dsi_cmdlist_rx: No rx buffer provided
[ 8.411105] mdss_dsi_cmdlist_rx: No rx buffer provided
[ 8.444438] mdss_dsi_cmdlist_rx: No rx buffer provided
[ 8.477774] mdss_dsi_cmdlist_rx: No rx buffer provided
[ 8.511103] mdss_dsi_cmdlist_rx: No rx buffer provided
[ 8.544438] mdss_dsi_cmdlist_rx: No rx buffer provided
[ 8.577776] mdss_dsi_cmdlist_rx: No rx buffer provided
[ 8.611107] mdss_dsi_cmdlist_rx: No rx buffer provided
[ 8.677772] mdss_dsi_cmdlist_rx: No rx buffer provided
[ 8.711108] mdss_dsi_cmdlist_rx: No rx buffer provided
[ 8.744443] mdss_dsi_cmdlist_rx: No rx buffer provided
[ 8.777774] mdss_dsi_cmdlist_rx: No rx buffer provided
[ 8.811109] mdss_dsi_cmdlist_rx: No rx buffer provided
[ 8.844438] mdss_dsi_cmdlist_rx: No rx buffer provided
[ 8.877772] mdss_dsi_cmdlist_rx: No rx buffer provided
[ 8.911105] mdss_dsi_cmdlist_rx: No rx buffer provided
[ 8.944436] mdss_dsi_cmdlist_rx: No rx buffer provided
[ 8.977771] mdss_dsi_cmdlist_rx: No rx buffer provided
[ 9.011098] mdss_dsi_cmdlist_rx: No rx buffer provided
[ 9.044437] mdss_dsi_cmdlist_rx: No rx buffer provided
[ 9.077775] mdss_dsi_cmdlist_rx: No rx buffer provided
[ 9.111108] mdss_dsi_cmdlist_rx: No rx buffer provided
[ 9.144438] mdss_dsi_cmdlist_rx: No rx buffer provided
[ 9.177773] mdss_dsi_cmdlist_rx: No rx buffer provided
[ 9.806004] mdss_mdp_pipe_init: no 2 type pipes available
[ 10.002563] mdss_dsi_event_handler: unhandled event=10
[ 10.128370] mdss_dsi_event_handler: unhandled event=10
[ 15.360134] mdss_dsi_event_handler: unhandled event=10
[ 15.423316] mdss_dsi_event_handler: unhandled event=10
[ 16.831090] mdss_dsi_event_handler: unhandled event=10
[ 16.863380] mdss_dsi_event_handler: unhandled event=10
[ 18.222058] mdss_dsi_event_handler: unhandled event=10
[ 20.490050] mdss_dsi_event_handler: unhandled event=10
[ 20.590121] mdss_dsi_event_handler: unhandled event=10
[ 20.628494] mdss_dsi_event_handler: unhandled event=10
[ 21.461420] mdss_dsi_event_handler: unhandled event=10
[ 21.500689] mdss_dsi_event_handler: unhandled event=10
[ 21.601000] mdss_dsi_event_handler: unhandled event=10
[ 22.428949] mdss_dsi_event_handler: unhandled event=10
[ 22.491264] mdss_dsi_event_handler: unhandled event=10
[ 22.568741] mdss_dsi_event_handler: unhandled event=10
[ 25.828356] mdss_dsi_event_handler: unhandled event=10
[ 25.918071] mdss_dsi_event_handler: unhandled event=10
[ 25.957597] mdss_dsi_event_handler: unhandled event=10
[ 27.310769] mdss_dsi_event_handler: unhandled event=10
Envoyé de mon SM-G900H en utilisant Tapatalk
gung raja said:
It will launch soon
Just be patient -_-
Click to expand...
Click to collapse
No i'm patient bro but i thought u will delete this project
Anyway i'm giving u a massive respect
Second succeffull build.
But same prob of the framework files not patched good.
I dont now why
FROM MY GALAXY EDGE PLUS
new build and some problem
phone booted and tock on bootanimation
[QUOTE?:??: W/?(?): --------- beginning of /dev/log/system
01-09 07:51:23.559: I/auditd(233): Starting up
01-09 07:51:23.559: I/auditd(233): --------- beginning of /dev/log/main
01-09 07:51:23.579: I/debuggerd_miui(235): add service shelld success!
01-09 07:51:23.579: I/debuggerd_miui(235): add service su_daemon success!
01-09 07:51:23.579: I/debuggerd_miui(235): add service debuggerd success!
01-09 07:51:23.579: I/debuggerd_miui(235): add service tunman success!
01-09 07:51:23.579: W/debuggerd_miui(235): service start entry 'shelld', flag :0
01-09 07:51:23.579: W/debuggerd_miui(235): starting 'shelld'
01-09 07:51:23.589: W/debuggerd_miui(235): service start entry 'su_daemon', flag :2
01-09 07:51:23.589: W/debuggerd_miui(235): starting 'su_daemon'
01-09 07:51:23.589: W/debuggerd_miui(235): service start entry 'debuggerd', flag :0
01-09 07:51:23.589: W/debuggerd_miui(235): starting 'debuggerd'
01-09 07:51:23.609: E/logwrapper(255): executing /system/bin/irsc_util failed: Permission denied
01-09 07:51:23.609: I/irsc_util(246): executing /system/bin/irsc_util failed: Permission denied
01-09 07:51:23.609: I/irsc_util(246): irsc_util terminated by exit(255)
01-09 07:51:23.609: I/installd(243): installd firing up
01-09 07:51:23.619: I/audit_log(233): Previous audit logfile detected, rotating
01-09 07:51:23.669: I/DEBUG(253): debuggerd: Jul 8 2015 21:25:48
01-09 07:51:23.679: I/cm(254): ____ _ _ ____ _ _ ____ ____ ____ _ _ _ _ ____ ___
01-09 07:51:23.689: I/Vold(226): Vold 2.1 (the revenge) firing up
01-09 07:51:23.709: D/Vold(226): Volume sdcard1 state changing -1 (Initializing) -> 0 (No-Media)
01-09 07:51:23.709: D/Vold(226): Volume usbdisk state changing -1 (Initializing) -> 0 (No-Media)
01-09 07:51:23.739: I/cm(258): | \_/ |__| |\ | | | | __ |___ |\ | |\/| | | | \
01-09 07:51:23.789: I/cm(260): |___ | | | | \| |__| |__] |___ | \| | | |__| |__/
01-09 07:51:23.839: I/Netd(234): Netd 1.0 starting
01-09 07:51:23.849: D/Vold(226): Volume sdcard1 state changing 0 (No-Media) -> 2 (Pending)
01-09 07:51:23.849: D/DirectVolume(226): DirectVolume::handlePartitionAdded -> MAJOR 179, MINOR 65, PARTN 1
01-09 07:51:23.849: D/Vold(226): Volume sdcard1 state changing 2 (Pending) -> 1 (Idle-Unmounted)
01-09 07:51:23.859: W/InterfaceController(234): Warning (dlopen failed: library "/system/lib/libnetcmdiface.so" not found) while opening the net interface command library
01-09 07:51:23.869: D/QSEECOMAPI244): QSEECom_get_handle sb_length = 0x2000
01-09 07:51:23.869: D/QSEECOMAPI244): App is not loaded in QSEE
01-09 07:51:23.869: E/QSEECOMAPI244): Error::Cannot open the file /vendor/firmware/keymaster/keymaster.mdt
01-09 07:51:23.869: E/QSEECOMAPI244): Error::Loading image failed with ret = -1
01-09 07:51:23.869: D/QSEECOMAPI244): QSEECom_get_handle sb_length = 0x2000
01-09 07:51:23.869: D/QSEECOMAPI244): App is not loaded in QSEE
01-09 07:51:23.899: I/cm(265): Welcome to Android 4.4.4 / CyanogenMod-11-20150712-UNOFFICIAL-ms013g
01-09 07:51:24.089: E/LBE-Sec(281): daemon bind failed with 98: Address already in use
01-09 07:51:24.129: I/SurfaceFlinger(237): SurfaceFlinger is starting
01-09 07:51:24.129: I/SurfaceFlinger(237): SurfaceFlinger's main thread ready to run. Initializing graphics H/W...
01-09 07:51:24.159: D/libEGL(237): loaded /vendor/lib/egl/libEGL_adreno.so
01-09 07:51:24.189: D/libEGL(237): loaded /vendor/lib/egl/libGLESv1_CM_adreno.so
01-09 07:51:24.229: D/libEGL(237): loaded /vendor/lib/egl/libGLESv2_adreno.so
01-09 07:51:24.239: D/QSEECOMAPI244): Loaded image: APP id = 2
01-09 07:51:24.289: I/Adreno-EGL(237): <qeglDrvAPI_eglInitialize:410>: EGL 1.4 QUALCOMM build: AU_LINUX_ANDROID_LNX.LA.3.5.2.2_RB1.04.04.02.087.006_msm8974_LNX.LA.3.5.2.2_RB1__release_AU ()
01-09 07:51:24.289: I/Adreno-EGL(237): OpenGL ES Shader Compiler Version: E031.24.00.14
01-09 07:51:24.289: I/Adreno-EGL(237): Build Date: 04/29/14 Tue
01-09 07:51:24.289: I/Adreno-EGL(237): Local Branch: mybranch3162585
01-09 07:51:24.289: I/Adreno-EGL(237): Remote Branch: quic/LNX.LA.3.5.2.2_rb1
01-09 07:51:24.289: I/Adreno-EGL(237): Local Patches: NONE
01-09 07:51:24.289: I/Adreno-EGL(237): Reconstruct Branch: AU_LINUX_ANDROID_LNX.LA.3.5.2.2_RB1.04.04.02.087.006 + NOTHING
01-09 07:51:24.629: E/qdutils(237): Failed to open msm_fb_panel_info node
01-09 07:51:24.629: I/qdhwcomposer(237): Initializing Qualcomm Hardware Composer
01-09 07:51:24.629: I/qdhwcomposer(237): MDP version: 500
01-09 07:51:24.629: I/SurfaceFlinger(237): Using composer version 1.3
01-09 07:51:24.629: I/qdhwcomposer(237): hwc_registerProcs
01-09 07:51:24.629: I/qdhwcomposer(237): Initializing UEVENT Thread
01-09 07:51:24.629: I/qdhwcomposer(237): Initializing VSYNC Thread
01-09 07:51:24.639: D/qdhwcomposer(237): hwc_getDisplayAttributes disp = 0, width = 720
01-09 07:51:24.639: D/qdhwcomposer(237): hwc_getDisplayAttributes disp = 0, height = 1280
01-09 07:51:24.639: I/qdhwcomposer(237): vsync_loop: Reading event 0 for dpy 0 from /sys/class/graphics/fb0/vsync_event
01-09 07:51:24.639: I/SurfaceFlinger(237): EGL informations:
01-09 07:51:24.639: I/qdhwcomposer(237): vsync_loop: Reading event 1 for dpy 0 from /sys/class/graphics/fb0/show_blank_event
01-09 07:51:24.639: I/SurfaceFlinger(237): vendor : Android
01-09 07:51:24.639: I/SurfaceFlinger(237): version : 1.4 Android META-EGL
01-09 07:51:24.639: I/SurfaceFlinger(237): extensions: EGL_KHR_get_all_proc_addresses EGL_ANDROID_presentation_time EGL_KHR_image EGL_KHR_image_base EGL_KHR_lock_surface EGL_KHR_gl_texture_2D_image EGL_KHR_gl_texture_cubemap_image EGL_KHR_gl_renderbuffer_image EGL_KHR_fence_sync EGL_KHR_create_context EGL_EXT_create_context_robustness EGL_ANDROID_image_native_buffer EGL_KHR_wait_sync EGL_ANDROID_recordable
01-09 07:51:24.639: I/SurfaceFlinger(237): Client API: OpenGL_ES
01-09 07:51:24.639: I/SurfaceFlinger(237): EGLSurface: 8-8-8-8, config=0x5
01-09 07:51:24.639: I/qdhwcomposer(237): vsync_loop: Reading event 0 for dpy 1 from /sys/class/graphics/fb-1/vsync_event
01-09 07:51:24.639: I/qdhwcomposer(237): vsync_loop: Reading event 1 for dpy 1 from /sys/class/graphics/fb-1/show_blank_event
01-09 07:51:24.699: D/WVMDrmPlugIn(241): WVMDrmPlugin:nGetSupportInfo : 0
01-09 07:51:24.779: I/mediaserver(242): ServiceManager: 0xb8462448
01-09 07:51:24.779: I/AudioFlinger(242): Using default 3000 mSec as standby time.
01-09 07:51:24.779: E/MediaPlayerFactory(242): calling dlopen on FACTORY_LIB
01-09 07:51:24.809: E/MediaPlayerFactory(242): calling dlsym on pFactoryLib for FACTORY_CREATE_FN
01-09 07:51:24.809: E/MediaPlayerFactory(242): registering DASH Player factory...
01-09 07:51:24.809: I/CameraService(242): CameraService started (pid=242)
01-09 07:51:24.809: I/CameraService(242): Loaded "Samsung MSM8226 Camera Wrapper" camera module
01-09 07:51:24.849: I/shelld(251): ServiceManager: 0xb79ac220
01-09 07:51:24.869: I/SurfaceFlinger(237): OpenGL ES informations:
01-09 07:51:24.869: I/SurfaceFlinger(237): vendor : Qualcomm
01-09 07:51:24.869: I/SurfaceFlinger(237): renderer : Adreno (TM) 305
01-09 07:51:24.869: I/SurfaceFlinger(237): version : OpenGL ES 3.0 [email protected] [email protected] ([email protected])
01-09 07:51:24.869: I/SurfaceFlinger(237): extensions: GL_AMD_compressed_ATC_texture GL_AMD_performance_monitor GL_AMD_program_binary_Z400 GL_EXT_debug_label GL_EXT_debug_marker GL_EXT_discard_framebuffer GL_EXT_robustness GL_EXT_texture_format_BGRA8888 GL_EXT_texture_type_2_10_10_10_REV GL_NV_fence GL_OES_compressed_ETC1_RGB8_texture GL_OES_depth_texture GL_OES_depth24 GL_OES_EGL_image GL_OES_EGL_image_external GL_OES_element_index_uint GL_OES_fbo_render_mipmap GL_OES_fragment_precision_high GL_OES_get_program_binary GL_OES_packed_depth_stencil GL_OES_depth_texture_cube_map GL_OES_rgb8_rgba8 GL_OES_standard_derivatives GL_OES_texture_3D GL_OES_texture_float GL_OES_texture_half_float GL_OES_texture_half_float_linear GL_OES_texture_npot GL_OES_vertex_half_float GL_OES_vertex_type_10_10_10_2 GL_OES_vertex_array_object GL_QCOM_alpha_test GL_QCOM_binning_control GL_QCOM_driver_control GL_QCOM_perfmon_global_mode GL_QCOM_extended_get GL_QCOM_extended_get2 GL_QCOM_tiled_rendering GL_QCOM_writeonly_rendering GL_EXT_sRGB GL_EXT_sRGB_write_control GL_EXT_text
01-09 07:51:24.869: I/SurfaceFlinger(237): GL_MAX_TEXTURE_SIZE = 4096
01-09 07:51:24.869: I/SurfaceFlinger(237): GL_MAX_VIEWPORT_DIMS = 4096
01-09 07:51:24.899: D/SurfaceFlinger(237): Screen acquired, type=0 flinger=0xb84594e0
01-09 07:51:24.899: D/qdhwcomposer(237): hwc_blank: Unblanking display: 0
01-09 07:51:24.899: D/qdhwcomposer(237): hwc_blank: Done unblanking display: 0
01-09 07:51:24.899: I/qdhwcomposer(237): handle_blank_event: dpy:0 panel power state: 1
01-09 07:51:25.109: D/AndroidRuntime(238): >>>>>> AndroidRuntime START com.android.internal.os.ZygoteInit <<<<<<
01-09 07:51:25.109: D/AndroidRuntime(238): CheckJNI is OFF
01-09 07:51:25.269: D/dalvikvm(238): Unable to stat classpath element '/data/app/com.miui.core-1.apk'
01-09 07:51:25.269: D/dalvikvm(238): Unable to stat classpath element '/data/app/com.miui.core-2.apk'
01-09 07:51:25.279: I/dalvikvm(238): DexOpt: Some deps went away
01-09 07:51:25.279: D/dalvikvm(238): ODEX file is stale or bad; removing and retrying (/data/dalvik-cache/[email protected]@[email protected])
01-09 07:51:25.379: D/dalvikvm(238): DexOpt: --- BEGIN 'miui.apk' (bootstrap=1) ---
01-09 07:51:25.679: D/libEGL(357): loaded /vendor/lib/egl/libEGL_adreno.so
01-09 07:51:25.679: D/libEGL(357): loaded /vendor/lib/egl/libGLESv1_CM_adreno.so
01-09 07:51:25.699: D/libEGL(357): loaded /vendor/lib/egl/libGLESv2_adreno.so
01-09 07:51:25.709: I/Adreno-EGL(357): <qeglDrvAPI_eglInitialize:410>: EGL 1.4 QUALCOMM build: AU_LINUX_ANDROID_LNX.LA.3.5.2.2_RB1.04.04.02.087.006_msm8974_LNX.LA.3.5.2.2_RB1__release_AU ()
01-09 07:51:25.709: I/Adreno-EGL(357): OpenGL ES Shader Compiler Version: E031.24.00.14
01-09 07:51:25.709: I/Adreno-EGL(357): Build Date: 04/29/14 Tue
01-09 07:51:25.709: I/Adreno-EGL(357): Local Branch: mybranch3162585
01-09 07:51:25.709: I/Adreno-EGL(357): Remote Branch: quic/LNX.LA.3.5.2.2_rb1
01-09 07:51:25.709: I/Adreno-EGL(357): Local Patches: NONE
01-09 07:51:25.709: I/Adreno-EGL(357): Reconstruct Branch: AU_LINUX_ANDROID_LNX.LA.3.5.2.2_RB1.04.04.02.087.006 + NOTHING
01-09 07:51:25.889: D/qdutils(237): DEBUG_CALC_FPS: 0
01-09 07:51:25.889: D/qdutils(237): period: 10
01-09 07:51:25.889: D/qdutils(237): ignorethresh_us: 500000
01-09 07:51:26.399: V/NatController(234): runCmd(/system/bin/iptables -F natctrl_FORWARD) res=0
01-09 07:51:26.409: V/NatController(234): runCmd(/system/bin/iptables -A natctrl_FORWARD -j DROP) res=0
01-09 07:51:26.419: V/NatController(234): runCmd(/system/bin/iptables -t nat -F natctrl_nat_POSTROUTING) res=0
01-09 07:51:26.429: V/NatController(234): runCmd(/system/bin/ip route flush cache) res=0
01-09 07:51:26.439: V/NatController(234): runCmd(/system/bin/iptables -F natctrl_tether_counters) res=1
01-09 07:51:26.449: V/NatController(234): runCmd(/system/bin/iptables -X natctrl_tether_counters) res=1
01-09 07:51:26.459: V/NatController(234): runCmd(/system/bin/iptables -N natctrl_tether_counters) res=0
01-09 07:51:26.809: D/dalvikvm(401): DexOpt: load 443ms, verify+opt 727ms, 1979788 bytes
01-09 07:51:26.939: D/MDnsDS(234): MDnsSdListener::Hander starting up
01-09 07:51:26.939: D/MDnsDS(234): MDnsSdListener starting to monitor
01-09 07:51:26.939: D/MDnsDS(234): Going to poll with pollCount 1
01-09 07:51:26.999: D/dalvikvm(238): DexOpt: --- END 'miui.apk' (success) ---
01-09 07:51:26.999: D/dalvikvm(238): DEX prep '/system/app/miui.apk': unzip in 96ms, rewrite 1619ms
01-09 07:51:26.999: D/dalvikvm(238): Unable to stat classpath element '/data/app/com.miui.system-1.apk'
01-09 07:51:26.999: D/dalvikvm(238): Unable to stat classpath element '/data/app/com.miui.system-2.apk'
01-09 07:51:27.009: I/dalvikvm(238): DexOpt: mismatch dep name: '/data/dalvik-cache/[email protected]@[email protected]' vs. '/data/dalvik-cache/[email protected]@[email protected]'
01-09 07:51:27.009: D/dalvikvm(238): ODEX file is stale or bad; removing and retrying (/data/dalvik-cache/[email protected]@[email protected])
01-09 07:51:27.019: D/dalvikvm(238): DexOpt: --- BEGIN 'miuisystem.apk' (bootstrap=1) ---
01-09 07:51:27.179: D/dalvikvm(569): Note: class Landroid/app/ActivityManagerNative; has 180 unimplemented (abstract) methods
01-09 07:51:27.189: D/dalvikvm(569): DexOpt: wanted static, got instance for method Lcom/android/internal/widget/LockPatternUtils;.patternToHash
01-09 07:51:27.409: D/dalvikvm(569): DexOpt: load 61ms, verify+opt 237ms, 1241732 bytes
01-09 07:51:27.939: D/dalvikvm(238): DexOpt: --- END 'miuisystem.apk' (success) ---
01-09 07:51:27.939: D/dalvikvm(238): DEX prep '/system/app/miuisystem.apk': unzip in 10ms, rewrite 924ms
01-09 07:51:27.939: D/dalvikvm(238): Unable to stat classpath element '/data/app/com.miui.core-1.apk'
01-09 07:51:27.939: D/dalvikvm(238): Unable to stat classpath element '/data/app/com.miui.core-2.apk'
01-09 07:51:27.939: I/dalvikvm(238): DexOpt: not all deps represented
01-09 07:51:27.939: D/dalvikvm(238): ODEX file is stale or bad; removing and retrying (/data/dalvik-cache/[email protected]@[email protected])
01-09 07:51:27.989: D/dalvikvm(238): DexOpt: --- BEGIN 'miui.apk' (bootstrap=1) ---
01-09 07:51:28.039: D/dalvikvm(570): DexOpt: sleeping on flock(/data/dalvik-cache/[email protected]@[email protected])
: E/(): Device disconnected
][/QUOTE]
Try asking an miui good developer about that
Maybe he will help you
Again start patching framework
Framework.jar and servives.jar
If ook
It wil released soon
FROM MY GALAXY EDGE PLUS
buggaty said:
Again start patching framework
Framework.jar and servives.jar
If ook
It wil released soon
FROM MY GALAXY EDGE PLUS
Click to expand...
Click to collapse
good luck bro......
I m also having same prob with my miui v7 it stucks at mi logo
Can i help u with this rom (testing it )