Hi,
I use my iMate Startrek with a set of a2dp headphones (the iMuffs), and I have to manually tell the phone to connect to the iMuffs using a2dp through the "Set as wireless stereo" option in the settings, can this be done automatically?
Another thing is that if I get a call while listening to music, the microphone on the headset doesnt work very well, and I have to shout for the person to hear me. I think that the mic in the headset is not being used. Has anybody had this problem and solved it?
Does anyone know if there are some registry settings that need to be tweaked to get these problems solved?
Thanks a lot.
I use an itech s38 and doesn't have a problem with the mic.
I do have problems with automatic connections.
after setting up properly, if the headset gets disconnected,
the next time it reconnects by itself is always on the headset profile
and mostly only connects if i make a call
So even when no indicator is shown I would assume that seconds
before ther call is answered the sound would be transfered to the headset
that's not so much of a problem
what really sickens me is that if i wanted to
listen to music via the headset when headset profile is connected
i would have to
1.hit the stick once to go to comm manager
2.hit "2" to turn off BT
3.exit to make sure action is done
4.hit center to go to comm manager again
5.hit "2" turn it on (making sure it doesn'ty connects to headset profile first)
6.hit Settings to go to BT settings (hit one or enter to getto that's two presses)
4.hit menu
5.hit devices
6.hit menu
7.hit set as wireless stereo
8.hit done
9.hit done again
10.hit exit
11.hit start
12.hit windows media
13.mess another big while in windows media playlists
..........
now that's too much ... many places i could use the home button
to exit quickly .. that's not what's frustating
what i need actually is a shortcut to the BT devices page
and a smarter profile to connect to wireless stereo for me
without having to turn off headset profile first
I am using HP Stereo Bluetooth headset with my QTEK 8500. It works fine besides the reconnection. If I turn the headset off in order to reconnect I have to go to the BT settings and set the headset to Stereo Headset again. I beleive your problem ocurs because your headset is also a handsfree headset, which HP is not.
I do beleive this behaviour is by design. Although I do not seen to understand the logic behind it.
it has been discussed before but I still can't get it.
I do have sound via bluetooth in my car when answering a call or initiating a new one.
but I can't hear anything from the phone applications like navigation or musicplayer.
how can I change that?
It has nothing to do with the bluetooth kit in my car as a blackberry worked seamlessly with playing music via BT. Even my old HP ipaq 514 also made sound announcements through BT.
Any settings to adjust?
You must change a bluetooth-setting.
- Comm Manager
- Settings (right button)
- 2 Bluetooth
- 1 Bluetooth
- select your BT car-stereo from the list (don't click)
- Menu (right button)
- 4 ... wireless stereo ... (don't know the English name, in Dutch "Als draadloos stereo instellen")
In my experience, each time you reconnect the device, you have to do this again because it automatically resets to the handsfree setting.
thanks! sounds promising.
but it doesn#t work as expected. the phone is either a BT headset or a BT stereo. not booth at once. hmmm not sooo good
Ok but this will only work if the car supports A2DP, correct? Because I have a BMW and when it is connected that option is not there. The BMW bluetooth module supports just headset profile.
But if I use a normal bluetooth headset I can actually get regular audio out of it some times. The car strictly works with phone calls. Perhaps sometimes audio is sent to it but ignored, I mean it can transfer phone numbers (dial in car screen), phone book so of course it should know how to tell if it is in a call or not?
the features you describe are part of the rSAP bluetooth profile, where actually the car is the phone and only borrows its identity from the phone. totally different story.
so if you do a call actually the car holds the connection to the network. Your phone is only involved as kind of remote sim-card reader.
My Galaxy S3 connects to my car's Bluetooth and allows me to make and receive calls. However, notification sounds are not playing via Bluetooth. It seems that the phone is sending the sounds to bluetooth but the car system doesn't play them. The result is that I have no audible indication when I receive a message when my phone is connected to my car's Bluetooth system.
Similarly, if I try to use S-Voice it would seem that the phone is expecting sound input via bluetooth and not from the phone's built in microphone, which means it does not detect any sound. Audio output also does not play on the phone or via bluetooth.
Presumably my car's bluetooth does not support receiving such sounds - only supporting basic phone functions. I cannot find any configuration settings on the car system to enable it.
Is there any way of stopping my phone trying to send notification sounds to bluetooth and to just play these via the phone's speaker but still allowing the phone to be connected to bluetooth for making and receiving calls? Similarly can I force S-Voice to use the phone's microphone and speaker if it cannot be made to work with my car's bluetooth?
S Voice on AT&T Galaxy Note Bluetooth In Car
First off, I am having the same issue, I tried even holding down talk / voice command button on steering wheel, No luck. I have a 2012 Kia Optima GLI full Nav and Voice command options. I have my Note working nicely with Team Perfection ICS R2, S Voice is fully functional except:
When using S voice in car connected to car Bluetooth (pushing search button on bottom of phone face) it tries to accept audio input from car Mic over Bluetooth, but never receives input. Can't find any setting in S voice app to change input setting from car to phone mic. Not sure why the car mic doesn't work other than just not supported by the s voice app? Anyone out there know of a fix or work around?
s voice does not work over any bluetooth
I have tried this on multiple Bluetooth devices. It does't hear anything and it responds with a very feint. Robotic distorted voice. Music plays well on Bluetooth but I have had problems with phone calls.so maybe the problem is the Bluetooth stack rather than s-voice.
I am having the same problem with SGS3. When I was testing s-voice on SGS2 you could set s-voice to use SGS speaker and mic for voice commands and notifications. Now I can't find that toggle.
BT Devices , yes....Car BT, No
It works fine on my headsets. IT doesn't work in my car.
spanout has nailed the problem. It apparently does NOT use the mic in the phone when hooked to BT. The car is not designed to pass voice to the BT. The car BTs typically have their own voice control, and as such is handling the voice itself.
When you think about it, it makes sense. Less chance for outside noise if it takes the input from the mic on your BT device, as likely the phone will not be close to your mouth.
The only way we'll get it to work is to find a way to enable the mic on the phone when on BT. Probably would need help from the DEVs here on that.
im in the same boat!
the real kicker is SIRI can send her voice over the car speakers and utilize the car mic.
so logic says, its purely a BT setting on the software ice cream and s3.
any apps for that? or any dev's want to chime in?
im using a very simple bmw bluetooth (not idrive).
it cant stream music, so i dont know how the fak siri can send her voice over it.
I have this problem with my SGS3, and had it with the SGS2 in my Ford S-Max. The problem is Ford's. Using the phone with a parrot car kit has all notifications fired over bluetooth.
georgedeaves said:
I have this problem with my SGS3, and had it with the SGS2 in my Ford S-Max. The problem is Ford's. Using the phone with a parrot car kit has all notifications fired over bluetooth.
Click to expand...
Click to collapse
same with a jabra freeway with latest v3 firmware and a galaxy s3 i9300xxblfb.
very dissapo9nted, finaly a fast, accurate voice app that understands my music requeats and i cant use it in the car!
Yakumo.unr said:
same with a jabra freeway with latest v3 firmware and a galaxy s3 i9300xxblfb.
very dissapo9nted, finaly a fast, accurate voice app that understands my music requeats and i cant use it in the car!
Click to expand...
Click to collapse
so switching the s-voice and nav to MONO works with bluetooth, but the a2dp or whatever protocol it uses normally doesnt work.
however calls are done using a2dp, so wtf?
can someone make a quick app that just forces ONLY s-voice and NAV in to mono?
the apps out there make everything go mono or nothing at all...sucks for voice call quality
I needed to revive this thread as a search for my problem led me to it.
1) Is anyone able to play a video on the S3 (GT-I9300 4.1.2) and stream the sound from the video to the car while connected via Bluetooth?
I am not.
2) S3 notification sounds do not play via the car's speakers when receiving a text message or email etc.
I can make and receive calls just fine and even play music from the S3 via BT by selecting the phone from the list of devices on the car's screen.
Blutooth / Voice App Issue - SOLVED
First of all this does work on my 2009 Highlander, but it's a bit Kuldgy.
BT Mono allows my voice app to work, but by itself it's not a solution. You have to activate it manually before using S-Voice, Google Voice or AVX. It opens the connection and has to be activated each time or it can be set to reconnect automatically…. Killing my radio.
Download the free version (I can’t access the play store to give you the link) and see if it works manually. If it works for your test then the rest should work as well.
Install Tasker:
Create a task to keep the screen from locking when your state is Bluetooth connected to the car device.
Create a Task (you don’t need it in a profile)
- Set bluetooth on (in case it’s off)
- Load BT mono (with auto on enabled in the BT mono app)
- Wait ~400MS
- Load App AVX (or S-Voice, or whatever)
- Wait 9 seconds
- Kill BT mono
- Kill BT mono root (it wasn’t always killing BT mono)
I’ve been thinking about trying to simply reboot the BT (BT off then wait then BT on) rather than kill an app.
You can add the task to your home screen as a widget…. Still not safe to do while driving.
That’s where GMD Gestures comes in. You set a swipe command, I use 2 fingers down, to launch the task.
Seems to work pretty well. I can keep my eyes on the road and still use voice commends. You do need to hang up the phone when you’re done talking, but I had to do that with Siri.
I still wish there was a force mono on all connections app, but I still haven’t seen one. AVX just added the ability to force mono for speech, it’s worked for other people, but I’m still trying to figure out why it doesn’t work for me (he's had reports that the Note 2 doesn't like his solution, Kudos to him for trying to add this).
Hope this helps
****UPDATE****
BT Mono may work for me because I'm rooted. According to the app on the store (pro version) Apparently Samsung, in an effort to prevent call recording, blocks the ability to re-route the microphone.
I am moving the issues below from my previous thread "Bluetooth contacts synch problems" - I believe they should be discussed in a separate thread...
I have a question regarding the Bluetooth connections...
I was able to pair my phone to the smart watch (Zeblaze Crystal) and to my car's Bluetooth and successfully synched the contacts.
Using the car Bluetooth is simple and easy - the only issue I have is that the phone is dual SIM and when I try to dial from the car the phone always asks which SIM to be used and eventually after a few seconds the dialing is interrupted. I can always set one of the SIM cards to be the default dial SIM but then why having the two cards if I cannot chose which one to use. Unfortunately there is no option in MIUI 7 to assign a SIM to a contact and the phone will always ask and wait for my choice...
Same case when dialing from the smart watch so at the end - no remote dialing from a Bluetooth device without touching the phone... If anyone knows a good way to solve this issue please share!
On the other hand I have a different issue with the smart watch. When connected, the watch overtakes the phone function and during a call the audio goes through the watch (funny). My natural desire is to transfer the audio to another Bluetooth device (headset or earpiece) so I can operate my calls/messages/notifications from the watch and hear the audio from the Bluetooth earpiece without taking the phone out of my bag.
The problem is that when I disable the phone audio function for the watch connection and enable it for the earpiece the watch also looses the control/notification capabilities - it just stops notifying me about the calls and messages I get.
There are three options in the Bluetooth menu that allow me to use the watch for: Phone audio, Media audio and Input device. If I disable the phone audio it cuts also the notifications and then no meaning of having the watch at all...
Any idea how to set the three devices (phone, watch, earpiece) to work simultaneously???
Thanks!
Bluetooth call & media audio seem to conflict, call always work, media not so much
Hello,
I'm on the Z5 Compact (6.0.1) and using the Jabra Stealth as my headset. Automatically both Call and Media Audio are always turned on, but sometimes, only the Call Audio works. And for it to work, I need to disable the Call Audio. But this means that next time I'll connect the device, only Media Audio will be turned on, rendering my BT device useless next time I get a call.
Now, I think I found a work around with Bluetooth Auto Connect, which appears to reset the profile to Call + Media at each connection. But I still need to disable Call Audio everytime Media doesn't work.
So, questions:
What the **** is this all about? No thread seem to be able to answer that question.
Would Tasker be able to do the following: If device connects outside of incoming call, activate Media Audio Only, if else activate Call + Media?
Would there be any other app that could solve my problem?
I personally despise Tasker, I found much simpler solutions with MacroDroid. But Tasker does have potential.
I looked around and found that this problem was recurrent amongst users, despite of brand or version.