Related
[ROM][Official Beta][7D-503L & 7D-501u][Lollipop 5.1.1][EMUI 3.1][C208B011SP05/SP06]
Huawei has officially started its lollipop upgrade program for MediaPad X1 (7D-503L & 7D-501u) by pushing the first OTA updates to beta testers.
If you are not one of them but would still like to give it a swirl, ROM files and update instructions as below.
Flashing method is standard huawei procedures other than u will need to flash 2 files this time round, the first serves to re-partition the internal memory to accommodate lollipop.
The usual 'be careful, do it at your own risks' caveats apply, do take note that everything on the phone's internal memory (the 16GB part) will be wiped, your microSD card will not be affected though.
Have fun!
Not working:
1) Please note MHL (HDMI) function is not available in this ROM, if you require this function, do not update.
2) Xposed Framework is also a no go on EMUI 3.1 without modding, if u really must try, remember to have the uninstaller (flashable zip) ready in your microSD card, u will need that when you run into a X1 that fails to boot
(Huawei's default per app 320/400 dpi setting is working fine, thus non working Xposed is non consequential if u only need it for this purpose)
Steps:
1) Ensure your X1 (501u and 503L) is on the latest official (non-rooted) EMUI 3.0 B011 ROM, if not, kindly update to it
7D-501u - http://emuirom123.dbankcloud.com/7D-501u_EMUI3.0_Android4.4_V100R002C208B011.zip?rid=1141
7D-503L - http://emuirom123.dbankcloud.com/7D-503L_EMUI3.0_Android4.4_V100R002C208B011.zip?rid=1142
Clear cache and reset to factory settings before you flash the Beta 5.1.1 below.
2) Download the 2 necessary ROM files (the smaller 30+MB one is an update for modem / radio / kernel and also for re-partitioning etc; the larger near 1GB file is the ROM proper)
7D-503L
http://www.mediafire.com/download/9ea7yb206d869ya/7D-503LV100R002C208B011SP05.zip
http://www.mediafire.com/download/7o9g94z8c756ijs/7D-503LV100R002C208B011SP05_Main.zip
7D-501u
http://www.mediafire.com/download/pfp85guitv71745/7D-501uV100R002C208B011SP06.zip
http://www.mediafire.com/download/dld8lxrewj288tm/7D-501uV100R002C208B011SP06_Main.zip
3) At the root of your microSD card, create a folder and name it 'dload', rename the 30+MB file to 'update.zip' and copy that into 'dload' folder
4) Go to 'Settings', 'Updater', 'Menu' and 'Local update'. Choose the (only) update available and perform the update.
5) Phone will reboot and update will run, when you see a big tick, eject the microSD card and the phone will reboot again (if it doesn't, simply long press the power button to force shut and restart it).
6) After the phone has rebooted, re-insert the microSD, navigate to 'dload' folder and erase the update.zip file
7) Unzip the near 1GB ROM file and copy the update.app file into 'dload' folder
8) Download unlmt.rar file below and copy the 0 byte cfg file into the dload folder
9) repeat above steps 4) to 6) (delete update.app instead at step 6)**
** If you are prompted for a PIN code when the phone reboots after a flash, fret not, simply force shut it by long pressing the power button, then enter Recovery by pressing the vol+ & power button simultaneously, and choose to clear cache. The PIN code request will be gone when the phone reboots
Google Play Store and Calendar / Contacts Sync
10) Your X1 should now be on 5.1.1, download and install the 3 google apk files below to get Play Store and Calendar / Contacts Sync.
(Good news here is the whole google framework already exists in the ROM, therefore there is no need to mess with root to do that)
Root
To obtain root access on this ROM, use the latest Wondershare MobileGo one click root (Win) program - thanks to jonjong http://forum.xda-developers.com/showpost.php?p=63397619&postcount=34 - to root it.
There is also another 'cleaner' method of flashing custom CWM recovery and then chainfire's update.zip, but this will involve unlocked bootloader and some knowledge or ability to read chinese, will find some time to include a detailed write-up if there is demand for it. For now, you can download the necessary below:
http://www.mediafire.com/download/i564vr6587r2ma8/X1_5.1.1_Root.rar
Both methods need an unlocked bootloader AFAIK. If u come from B011, the bootloader should already have been unlocked.
If your X1 is 501L, you can unlock your bootloader by flashing the latest B102 ROM (EMUI3.0 / KK 4.4.2 / International / GAPPS) released by Huawei Germany - thanks to super_sonic http://forum.xda-developers.com/showpost.php?p=63420650&postcount=50
B102 download: http://www.mediafire.com/download/i...iaPad_X1_SDCard_Update_Android_4.4.2_B102.zip
Do note that if you do a factory reset after updating to 5.1.1 or re-flash 5.1.1 within 5.1.1, there is a chance that the bootloader will be re-locked.
Your mileage may vary.
Good luck
what about 501u ??
Great! Finally! Waiting for 501U
How is the performance guys. Is it snappier or the same lags?
Thank you very much, have been waiting for this since August as promised by Huawei. I don't want to stuck at kitkat (B011).
---------- Post added at 01:36 PM ---------- Previous post was at 01:33 PM ----------
With my 2 cents, you can use this rom on 501u with 4G switch off.
I dont understand,i have done everything right,but still its 4.4.2 and not 5.1.1.
And it doesnt recognize which version i have!!
When it boots it says android,and it doesnt have the Honor X1 logo.
drake19 said:
I dont understand,i have done everything right,but still its 4.4.2 and not 5.1.1.
And it doesnt recognize which version i have!!
When it boots it says android,and it doesnt have the Honor X1 logo.
Click to expand...
Click to collapse
reset the phone to factory settings, clear cache and re-flash.
hope it helps.
potatohead said:
reset the phone to factory settings, clear cache and re-flash.
hope it helps.
Click to expand...
Click to collapse
I have reset the phone,cleared cache but it does not re-flash the rom,it says something in chinese and it has and explanion mark.
When i flashed the first small update,in system info,it was saying that is B011SP5 but it wasnt 5.1.1.
drake19 said:
I have reset the phone,cleared cache but it does not re-flash the rom,it says something in chinese and it has and explanion mark.
When i flashed the first small update,in system info,it was saying that is B011SP5 but it wasnt 5.1.1.
Click to expand...
Click to collapse
have u tried flashing the big file it in recovery?
if still not working, download and unzip the attached file, put the unzipped 0 byte cfg file together with update.app in dload folder, reboot the phone and see if it auto flashes, if it does, hope it flashes as per normal.
if it doesn't, restart in recovery and tried flashing it again.
potatohead said:
have u tried flashing the big file it in recovery?
if still not working, download and unzip the attached file, put the unzipped 0 byte cfg file together with update.app in dload folder, reboot the phone and see if it auto flashes, if it does, hope it flashes as per normal.
if it doesn't, restart in recovery and tried flashing it again.
Click to expand...
Click to collapse
It flashes the rom but its the same,old android logo on boot and it thinks that it have 4.4.2 not 5.1.1.
Mine X1 it came with european rom 7D-501L but on the box the model is 7D-503L,i flashed the 4.4.2 with the product flag.
drake19 said:
It flashes the rom but its the same,old android logo on boot and it thinks that it have 4.4.2 not 5.1.1.
Mine X1 it came with european rom 7D-501L but on the box the model is 7D-503L,i flashed the 4.4.2 with the product flag.
Click to expand...
Click to collapse
1st try also same problem as yours, I tried with dload contain only update.app then successful. Hope this will help.
jonjong said:
1st try also same problem as yours, I tried with dload contain only update.app then successful. Hope this will help.
Click to expand...
Click to collapse
Have you flashed it via updater at second time!?
Thank you so much, working great for 501L
Please more details for my 501l
Should i flash the modem file too before updating with the main file as per suggested procedure.. how did you manage to make this work on a 501l .. please clarify..
anyone got root?
giuliano.rigon said:
Should i flash the modem file too before updating with the main file as per suggested procedure.. how did you manage to make this work on a 501l .. please clarify..
Click to expand...
Click to collapse
1. Ensure your X1 501L is on the latest EMUI 3.0 7D-503LV100R002C208B011 ROM.
2. Flash this rom => http://www.mediafire.com/download/9e...08B011SP05.zip
3. Follow post #9 put attach file to dload folder + main rom and copy to micro sd card, and go to restart your phone.
Good luck.
sikidim7 said:
anyone got root?
Click to expand...
Click to collapse
Same question here, tried a few methods but no prevail, my bootloader is unlocked & rooting were easy on Kitkat. Any advise?
File was removed from mediafire apparently.. .. is it the same one you can download at the start of this post? i have dowloaded it already.. the file you tried to share has been in any waymodified for 501l.. thanks
---------- Post added at 09:42 AM ---------- Previous post was at 09:40 AM ----------
Cannot find file on mediafire.. is it a modificstionof the one at the start of the post, the 503l one.. i got that one..
Sorry but mediafire lists your file as unavailable.. thanks for reposting if you can..
---------- Post added at 04:22 PM ---------- Previous post was at 04:05 PM ----------
Eoo007 said:
Thank you so much, working great for 501L
Click to expand...
Click to collapse
Unrooted 501l on european b103.. how do i proceed please to flash this lollipop 503l on my phone.. if anyone could help..
giuliano.rigon said:
Sorry but mediafire lists your file as unavailable.. thanks for reposting if you can..
Unrooted 501l on european b103.. how do i proceed please to flash this lollipop 503l on my phone.. if anyone could help..
Click to expand...
Click to collapse
it is the same file i posted in the OP, it is not removed, rather Eoo007 didn't do a proper link, here u go:
http://www.mediafire.com/download/9ea7yb206d869ya/7D-503LV100R002C208B011SP05.zip
from huawei's forum, this file apparently also serves the purpose of re-partitioning to accommodate lollipop, other than updating the necessary modems.
good luck
So i need to flash a cust.img through recovery because fastboot doenst work gives me "remote:command not allowed fastboot" but if i want to flash it through the recovery it says "Error: File larger then target device" i basicly only need to flash the cust.img to fix my phone.
What i tried:
Use fastboot, tried new version of android SDK
flashed diffrent recoverys, same results.
Please help i really need my phone ;/
Demian3112 said:
So i need to flash a cust.img through recovery because fastboot doenst work gives me "remote:command not allowed fastboot" but if i want to flash it through the recovery it says "Error: File larger then target device" i basicly only need to flash the cust.img to fix my phone.
What i tried:
Use fastboot, tried new version of android SDK
flashed diffrent recoverys, same results.
Please help i really need my phone ;/
Click to expand...
Click to collapse
Are you on stock rom? if so you have to enable oem for fastboot to work, it should be somewhere in the developer settings. otherwise i wouldn't know
jimandroidnerd said:
Are you on stock rom? if so you have to enable oem for fastboot to work, it should be somewhere in the developer settings. otherwise i wouldn't know
Click to expand...
Click to collapse
Im on b130 kiw l21 my phone shows wrong data under about phone and i cant apply a update to go back to stock from the dload file it simply instant says syatem update failed. I just want to revert back to stock then update to b140 and then to B330 emui 4.0 but i cant because the dload keeps failing
Demian3112 said:
Im on b130 kiw l21 my phone shows wrong data under about phone and i cant apply a update to go back to stock from the dload file it simply instant says syatem update failed. I just want to revert back to stock then update to b140 and then to B330 emui 4.0 but i cant because the dload keeps failing
Click to expand...
Click to collapse
you say you are on b130 but than you say you wanna go to stock rom? I dont really understand what you are telling me here
jimandroidnerd said:
you say you are on b130 but than you say you wanna go to stock rom? I dont really understand what you are telling me here
Click to expand...
Click to collapse
My device got bricked B330. So i had to reflash some stuff and ended up with false info under the section About Phone i had the same issue as him So i followed that instructions but i couldnt flash the Cust.img in the recovery (twrp) it gives me the error that i have as title. Without flashing the cust.img i cant use a revert package through dload since my Phone shows other information then the update package (denies to do the update instant) . My question how can i fix the error "File bigger then target device" so i can flash the Cust.img since fast boot doesnt work (error remote: command not allowed recovery) and twrp is my only option..
Instructions i followed to get back to stock.
Flash Boot.img, system.img, cust.img through twrp > flash stock recovery > Apply UK back to stock through dload
I cant flash cust.img so step 1 fails and i cant do the rest.
Anyone a idea why i cant flash this file through TWRP and fastboot? This is littery my last hope to get back to stock ;/
Demian3112 said:
Anyone a idea why i cant flash this file through TWRP and fastboot? This is littery my last hope to get back to stock ;/
Click to expand...
Click to collapse
I could give you my twrp backup? Maybe that will help
jimandroidnerd said:
I could give you my twrp backup? Maybe that will help
Click to expand...
Click to collapse
I mean i should be able to flash cust.img through fastboot right?
Demian3112 said:
I mean i should be able to flash cust.img through fastboot right?
Click to expand...
Click to collapse
No, i meant i can give u my twrp backup so you van restore it from twrp. Do you want it or not?
jimandroidnerd said:
No, i meant i can give u my twrp backup so you van restore it from twrp. Do you want it or not?
Click to expand...
Click to collapse
Nvm thanx! Fixed it im an idiot.
I was so bussy almost 2 days with this. I have no experience (14old) and i simply went bussy so much with it that i started looking over the simple things. I fixed it now it left me with a damm headache thnx anyways, i learned something again!
jimandroidnerd said:
No, i meant i can give u my twrp backup so you van restore it from twrp. Do you want it or not?
Click to expand...
Click to collapse
Oke i got a bit too excited. The fingerprint option is gone like it never has been there. Honor boot logo has a red H, i get the b140 update but cant apply it same issue with dload. Would you mind sharig your TWRP update? If it is possible for B330 and B130 Thx!
Demian3112 said:
Oke i got a bit too excited. The fingerprint option is gone like it never has been there. Honor boot logo has a red H, i get the b140 update but cant apply it same issue with dload. Would you mind sharig your TWRP update? If it is possible for B330 and B130 Thx!
Click to expand...
Click to collapse
You need to use kiwi_twrp_5-14_recovery.img
and the backup needs to contain all these partitions
boot.emmc.win
cust.ext4.win"
erecovery.emmc.win"
firmware.info"
firmware.vfat.win"
misc.emmc.win"
persist.ext4.win
system.ext4.win000
system.ext4.win001
restore those and you'll be back in business
This rom also contains the /cust partition for b130
http://forum.xda-developers.com/honor-5x/development/custom-rom-starter-template-honor-5x-t3328809
clsA said:
You need to use kiwi_twrp_5-14_recovery.img
and the backup needs to contain all these partitions
boot.emmc.win
cust.ext4.win"
erecovery.emmc.win"
firmware.info"
firmware.vfat.win"
misc.emmc.win"
persist.ext4.win
system.ext4.win000
system.ext4.win001
restore those and you'll be back in business
This rom also contains the /cust partition for b130
http://forum.xda-developers.com/honor-5x/development/custom-rom-starter-template-honor-5x-t3328809
Click to expand...
Click to collapse
This is what i got.. http://prntscr.com/brv0ay the Repository doesnt contain this files aswell any idea? Is it possible to flash for example a full Kiw L22 rom and then use a revert package for L21 through Dload?
Oke what i did:
Wipe
Apply Cust partition with terminal
Apply backup/restore
flash stock recovery
Boots same issue, I just need the dload to get to work so i can flash the recovery pack. But it stays at 0 percent even after 15 mins.
What i found out is that i dont have the stock firmware (Dont have fingerprint and stuff, device doenst show as KIW L21), so i doenst do a ota update and local update ofcourse. I need a TWRP backup with firmware included. What im trying now is installing L21 MIDDLE-EAST firmware and then try to use a revert package for L21 through OTA.
Arobase40 said:
Well, I'm not sure this is a good idea as it took me 11 days to upgrade from B140 (Lollipop) to B330 (Marshmallow) and only a few minutes to brick my Honor 5x L21 using a backup from kiwi_twrp_5-14_recovery.img when I wanted to revert back to B140... ^^
At boot time after the restore, I have an animated red H letter from the Honor Logo and impossible to get back to the welcome screen nor to any other screen so I don't have access to TWRP anymore...
We really need to have access to the official downgrade firmware from Honor !!!
Click to expand...
Click to collapse
Same issue.. I get red H honor logo.. cant apply a single update through ota/dload and finger print is gone.. I can do everything, installing apps and stuff but i cant revert back to full stock.
clsA said:
You need to use kiwi_twrp_5-14_recovery.img
and the backup needs to contain all these partitions
boot.emmc.win
cust.ext4.win"
erecovery.emmc.win"
firmware.info"
firmware.vfat.win"
misc.emmc.win"
persist.ext4.win
system.ext4.win000
system.ext4.win001
restore those and you'll be back in business
This rom also contains the /cust partition for b130
http://forum.xda-developers.com/honor-5x/development/custom-rom-starter-template-honor-5x-t3328809
Click to expand...
Click to collapse
Could you link me the firmware.vfat and misc.emmc and persist.ext. Is there a way to make the update.app a flashable zip? Anyways any idea what i still could do?
Anyways what would you recommend me to go back to stock right now? Is it cuz my system partition is messed up? How to fix? thx anyways!
Arobase40 said:
As I said it is NOT really a good idea to use a TWRP backup to revert back from Marshmallow to Lollipop as it will brick your device !
I also said : ask your local Honor technical support for an official revert back firmware as your whole system is obviously messed up.
I don't know how you upgraded your smartphone but better downgrade to Lollipop first and try to upgrade again to MM a "proper way"...
Click to expand...
Click to collapse
]
Thats the point.. I simply cant. Phone doenst accept dload updates instant says "System Failed", most near honor technical support is 98 km out.
Ok anyways does anyone have a B330 full stock backup?
Arobase40 said:
I didn't say you had to move yourself to a technical support but place a phone call or mail them. You should find their phone number or their email address from your the Honor Website.
I'll do it myself by tomorrow...
Click to expand...
Click to collapse
I fixed it. Go to hi honor and search for honor 5x firmware, download it unpack it put the update.app on dload on microsd make sure you flashed stock recovery through fastboot hold power + volume down + volume up until it vibrates and done. I couldnt install any dload file on XDA the error "system failed" means the update is not for your device. The one on hihonor was the only one that worked for me ive been bussy 3 days its worth trying. I can link/upload you the download and instructions if you want to but ill do it tomorrow.
jimandroidnerd said:
No, i meant i can give u my twrp backup so you van restore it from twrp. Do you want it or not?
Click to expand...
Click to collapse
Hello i have the same problem could you please give me your backup so i can try it?
Same issue
Hello,
I need a stock recovery and stock rom for Huawei ShotX (p 7i)
version ATH UL-01
I searched google but unfortunately ineffectively, maybe someone has a link to the above?
shaq8 said:
Hello,
I need a stock recovery and stock rom for Huawei ShotX (p 7i)
version ATH UL-01
I searched google but unfortunately ineffectively, maybe someone has a link to the above?
Click to expand...
Click to collapse
I think you should flash the stock firmware
ok, but how? I currently have twrp not a stock recovery. from what I read to reflash stock rom, should have stock recovery because at trwp can not be done. I understand that as a stock firmware You understand the stock rom? or maybe something else?
@shaq8 you posted in the wrong forum buddy.
But to answer your question I found a Lollipop stock package for your device.
Thanks for the link DigiGoon
but how to flash new firmware? All descriptions refer to the dload method, which I can not use because I do not have stock recovery. Is there any method to reflash new firmware having trwp instaled?
and in fact my mistake. the topic was to be started in the P7 section. If an admin will go on this thread , please transferred to the Huawei P7 section
shaq8 said:
Thanks for the link DigiGoon
but how to flash new firmware? All descriptions refer to the dload method, which I can not use because I do not have stock recovery. Is there any method to reflash new firmware having trwp instaled?
and in fact my mistake. the topic was to be started in the P7 section. If an admin will go on this thread , please transferred to the Huawei P7 section
Click to expand...
Click to collapse
No worries, I'll help you regardless of in which section your thread resides.
So, to flash the UPDATE.APP, follow these steps:
First download the package from the link I provided.
Extract it, and find UPDATE.APP
Now you have to extract the stock recovery from UPDATE.APP using Huawei UPDATE Extractor tool.
After pulling recovery.img you have to flash it to your device via bootloader.
Boot into bootloader mode and flash the recovery by firing this command:
Code:
fastboot flash recovery recovery.img
Now you have Stock recovery installed.
I hope you are on Lollipop only, if your device was rooted, you have to first flash .img files manually and then force update it via UPDATE.APP.
If your device is not rooted then put the UPDATE.APP in dload folder in your External SDCARD, and press the three button combo after switching off your device, the update process will start then.
I hope this clears something.
the phone has root.
Custom recovery already loaded and working.
I understand that now I have a reflash of all files from update.app? the sequence of flashing files has any meaning?
I ask because I would not want to mess up more in the phone
shaq8 said:
the phone has root.
Custom recovery already loaded and working.
I understand that now I have a reflash of all files from update.app? the sequence of flashing files has any meaning?
I ask because I would not want to mess up more in the phone
Click to expand...
Click to collapse
No, you can flash them in any sequence. It doesn't effect in any way.
everything works, phone alive
DigiGoon thank you very much for your help, you saved my life
i have the same broblam but i did not understand anything
I got it fixed by just flashing the stock recovery instead of full ROM.
Stock Recovery here :
https://forum.xda-developers.com/honor-7/development/recovery-huawei-shot-x-aka-honor-7i-t3548163
i hve update my device huawei ATH-TLOOH,but when i try to reflash it through bootloader,it show error(Unlock frp first)
But by device is not started,i try to unlock it through frp erase tool bt it asks 16 digit unlock key,
my mobile is hong kong made,i cant find imie num bcz on the back of my mobile there is chinese language and no imie num is written...
em suck and helpless cant understand what to do...
cant find exact firmware version but if find it says software installation failed also...plz help me
Well, i want to exit of the list of safetynet, i tried magisk safetynet fix, nothing works, this happened after a HOTA Downgrade to Nougat because Oreo (EMUI B330) made me lose too much performance of my Mate 10 Lite (RNE-L03C178) and the APi interpreted the downgrade how a dangerous modification of the system for the apps or in other words a cheating action, i want to exit of the list of the api, i listened with a complete format of a device the safetynet will provide the apps (With SafetyNet block) back in Play Store.
Well i want to format my device with the DLOAD method or other method, could someone explain to me how to do it? (the process of the dload)
Sorry for the grand explanation and my too very bad english, my language is spanish...
Koa1 said:
Well, i want to exit of the list of safetynet, i tried magisk safetynet fix, nothing works, this happened after a HOTA Downgrade to Nougat because Oreo (EMUI B330) made me lose too much performance of my Mate 10 Lite (RNE-L03C178) and the APi interpreted the downgrade how a dangerous modification of the system for the apps or in other words a cheating action, i want to exit of the list of the api, i listened with a complete format of a device the safetynet will provide the apps (With SafetyNet block) back in Play Store.
Well i want to format my device with the DLOAD method or other method, could someone explain to me how to do it? (the process of the dload)
Sorry for the grand explanation and my too very bad english, my language is spanish...
Click to expand...
Click to collapse
In theory, you should download the stock rom from here: http://pro-teammt.ru/firmware-database/
Then, unzip the file and copy UPDATE.APP on your SD card. It has to be in a folder named dload on the root of the card.
Afterwards, reboot on download mode (turn off your phone, then, press volume up + volume down + power button until Huawei logo appears). This should trigger the process to install the app UPDATE.APP file.
If you have TWRP recovery, you will need to go back to your stock recovery (on that... please search on this forum).
I hope this helps!
jeinnerabdel said:
In theory, you should download the stock rom from here: http://pro-teammt.ru/firmware-database/
Then, unzip the file and copy UPDATE.APP on your SD card. It has to be in a folder named dload on the root of the card.
Afterwards, reboot on download mode (turn off your phone, then, press volume up + volume down + power button until Huawei logo appears). This should trigger the process to install the app UPDATE.APP file.
If you have TWRP recovery, you will need to go back to your stock recovery (on that... please search on this forum).
I hope this helps!
Click to expand...
Click to collapse
I'm understanding the next step...the download of all 3 files (update.zip and the others files) of a one file and extract it
Because Firmware Finder gives me 3 zip files and i not understand wich of 3 decompress the update.app
Sorry for my english...again...
jeinnerabdel said:
In theory, you should download the stock rom from here: http://pro-teammt.ru/firmware-database/
Then, unzip the file and copy UPDATE.APP on your SD card. It has to be in a folder named dload on the root of the card.
Afterwards, reboot on download mode (turn off your phone, then, press volume up + volume down + power button until Huawei logo appears). This should trigger the process to install the app UPDATE.APP file.
If you have TWRP recovery, you will need to go back to your stock recovery (on that... please search on this forum).
I hope this helps!
Click to expand...
Click to collapse
I listened about to do this with the 3 update.app files
1.-update.zip
2.-update_data_full_public.zip
3.-update_full_RNE-L03_xxxxx_la.zip
Extract their update.app and install in order
Is this correct?
Koa1 said:
I listened about to do this with the 3 update.app files
1.-update.zip
2.-update_data_full_public.zip
3.-update_full_RNE-L03_xxxxx_la.zip
Extract their update.app and install in order
Is this correct?
Click to expand...
Click to collapse
Update.app in update.zip and update.app in update_full_RNE-L03_xxxxx_la.zip
Unless it's offline firmware it won't install.
And in most cases it's online only.
ante0 said:
Update.app in update.zip and update.app in update_full_RNE-L03_xxxxx_la.zip
Unless it's offline firmware it won't install.
And in most cases it's online only.
Click to expand...
Click to collapse
I install in order specified and finally wipe with erecovery, is this correct?
ante0 said:
Update.app in update.zip and update.app in update_full_RNE-L03_xxxxx_la.zip
Unless it's offline firmware it won't install.
And in most cases it's online only.
Click to expand...
Click to collapse
And the last question...
What is the diference of a Online Firmware and a Offline Firmware?
ante0 said:
Update.app in update.zip and update.app in update_full_RNE-L03_xxxxx_la.zip
Unless it's offline firmware it won't install.
And in most cases it's online only.
Click to expand...
Click to collapse
Nothing, i resolved it, thanks very much!
ante0 said:
Update.app in update.zip and update.app in update_full_RNE-L03_xxxxx_la.zip
Unless it's offline firmware it won't install.
And in most cases it's online only.
Click to expand...
Click to collapse
I tried to install it, it stucks at 5% and error message, what i do? Please help...
(Huawei MATE 10 ALP-L09) Hello, I tell you my situation, I am in the emui 8 version with cust 432 in the 150 sp1 version (xloader 1).
I want to try emui 9 so I'm going to switch to xloader 2.
I have the bootloader open and I'll leave it like this to update manually.
I'm going to use the HWOTA system, but when downloading the files of the latest version of emui 9 (version 159) I realize that 3 * .zip files are no longer the same as before, now only 2 files form it. The steps are the same? I put those two files in the Repack folder and then I go to the Ota folder and run the ota.bat ??
And another thing, should we rename those two files as was done before?
Thank you. A greeting.
Koa1 said:
I tried to install it, it stucks at 5% and error message, what i do? Please help...
Click to expand...
Click to collapse
quite old topic i know but i faced the same problem here with my mediapad now. copied all files and update.app to sd card under dload folder but got the error message at 5 percent. there was any solution for this?
artifexor said:
quite old topic i know but i faced the same problem here with my mediapad now. copied all files and update.app to sd card under dload folder but got the error message at 5 percent. there was any solution for this?
Click to expand...
Click to collapse
From dload folder you can flash Service ROM only,
you can download the S. ROM here:
https://androidhost.ru/search.html
Follow the instructions in "ReleaseDoc" . GL!
Warning: this process will erase all the data from your device!!!
bozka1 said:
https://androidhost.ru/search.html
Click to expand...
Click to collapse
Thank you very much! This site contains only service ROM? I have not found any explicit service ROM just regular looking ROM file and some repair ROM but for different region and with password. My current ROM version is BTV-DL09C100B311.
artifexor said:
Thank you very much! This site contains only service ROM? I have not found any explicit service ROM just regular looking ROM file and some repair ROM but for different region and with password. My current ROM version is BTV-DL09C100B311.
Click to expand...
Click to collapse
Yes, only service and board ROM.
Explicit service ROM for your device/ROM version :
https://androidhost.ru/8Xg
bozka1 said:
Yes, only service and board ROM.
Explicit service ROM for your device/ROM version :
https://androidhost.ru/8Xg
Click to expand...
Click to collapse
Is there any service ROM for RNE-L03C178 or C605? I’ve been searching a lot, and well I don’t find anything. And sorry to answer to this old post
Koa1 said:
Is there any service ROM for RNE-L03C178 or C605? I’ve been searching a lot, and well I don’t find anything. And sorry to answer to this old post
Click to expand...
Click to collapse
Enjoy
C605
https://androidhost.ru/311B
https://androidhost.ru/afs
https://androidhost.ru/7AU
C178 (paid service, 17euros )
https://easy-firmware.com/index.php?a=downloads&b=file&id=173660
https://easy-firmware.com/index.php?a=downloads&b=file&id=150819
bozka1 said:
Yes, only service and board ROM.
Explicit service ROM for your device/ROM version :
https://androidhost.ru/8Xg
Click to expand...
Click to collapse
bozka1 said:
Enjoy
C605
https://androidhost.ru/311B
https://androidhost.ru/afs
https://androidhost.ru/7AU
C178 (paid service, 17euros )
https://easy-firmware.com/index.php?a=downloads&b=file&id=173660
https://easy-firmware.com/index.php?a=downloads&b=file&id=150819
Click to expand...
Click to collapse
Thanks! But, do you have the one for Android 7.0?
Koa1 said:
Thanks! But, do you have the one for Android 7.0?
Click to expand...
Click to collapse
For A 7 I don’t find anything on androidhost.ru , try
https://easy-firmware.com/index.php?a=downloads&b=folder&id=31285&p_start=1 .
P.S.: If I may ask, why A7 ?
bozka1 said:
For A 7 I don’t find anything on androidhost.ru , try
https://easy-firmware.com/index.php?a=downloads&b=folder&id=31285&p_start=1 .
P.S.: If I may ask, why A7 ?
Click to expand...
Click to collapse
Because Android 8 in this phone works bad and slow
Koa1 said:
Because Android 8 in this phone works bad and slow
Click to expand...
Click to collapse
Okay, but if You now running A8 , You can downgrade to A7 using HiSuite (Update > Other version) , or, if You have TWRP on board, You can downgrade flashing A7 firmware via HuRupdater 0.4 . It's strongly not recommended downgrade via dload method, it may brick Your phone.
Currently on EMUI 8 and looking to update to EMUI 9 but I still haven't received the update. Looking to use the dload method maybe.
I'm on ALP-L09 8.0.0.137 (C212) but it's a custom version I believe. It says "Custum version: CUSTC212D001"
I was wondering if I could download ALP-L09 9.0.0.159 (C212) from FirmwareFinder (Says it's not approved for installation even though it's the same region, probably because I have a custom version from my cellphone provider AT&T Mexico) and install it via the dload method.
Would this brick my phone and how would I do the dload method exactly?
I'm on the same boat, and 159 has been in FF for over a month now only in FullOTA. Pinche ATT nunca aprueba rápido las cosas....
ShadowFlame303 said:
Currently on EMUI 8 and looking to update to EMUI 9 but I still haven't received the update. Looking to use the dload method maybe.
I'm on ALP-L09 8.0.0.137 (C212) but it's a custom version I believe. It says "Custum version: CUSTC212D001"
I was wondering if I could download ALP-L09 9.0.0.159 (C212) from FirmwareFinder (Says it's not approved for installation even though it's the same region, probably because I have a custom version from my cellphone provider AT&T Mexico) and install it via the dload method.
Would this brick my phone and how would I do the dload method exactly?
Click to expand...
Click to collapse
You can't install regular updates as dload. You would need service firmware from androidhost.ru
ante0 said:
You can't install regular updates as dload. You would need service firmware from androidhost.ru
Click to expand...
Click to collapse
Can't seem to find a file with the right model/region on the website but if I do, how would I go about doing the dload method?
ShadowFlame303 said:
Can't seem to find a file with the right model/region on the website but if I do, how would I go about doing the dload method?
Click to expand...
Click to collapse
Extract the downloaded zip. Go into the Software folder, copy 'dload' folder to the root of a micro sd. Put micro sd in your phone, reboot while holding vol up + down. This will put you in dload mode where update will start (takes a while).
Alternatively you can open dialer app and enter:*#*#2846579#*#*, this will open Projectmenu. Tap on Software upgrade, SD Upgrade, 'yes'. Phone will reboot to dload mode and start update.
@ante0 i have usa version and it doesnt have microsd slot, i was able to download full rom from ff along with data rom as well, i extracted update.app, now do i have to flash each partition seperately or just system and i have no clue what those commands are, i have tried it with usb otg and dialer pad method but it said install failed, i also registered it in ff and tried erecovery method but my phone does not boot to erecovery only regular recovery, i can boot to fastboot fine, this phone was never bl unlocked, any ideas on how to proceed.
lingarajug said:
@ante0 i have usa version and it doesnt have microsd slot, i was able to download full rom from ff along with data rom as well, i extracted update.app, now do i have to flash each partition seperately or just system and i have no clue what those commands are, i have tried it with usb otg and dialer pad method but it said install failed, i also registered it in ff and tried erecovery method but my phone does not boot to erecovery only regular recovery, i can boot to fastboot fine, this phone was never bl unlocked, any ideas on how to proceed.
Click to expand...
Click to collapse
It doesn't work with firmware from FF. Those are online only.
What happens if you boot device and hold volume up after the Huawei logo?
@ante0 i have tried that and the phone just boots regularly.
lingarajug said:
@ante0 i have tried that and the phone just boots regularly.
Click to expand...
Click to collapse
USB + vol up then?
ante0 said:
USB + vol up then?
Click to expand...
Click to collapse
It goes into normal recovery not erecovery, i am on 129 december security update.
ante0 said:
Extract the downloaded zip. Go into the Software folder, copy 'dload' folder to the root of a micro sd. Put micro sd in your phone, reboot while holding vol up + down. This will put you in dload mode where update will start (takes a while).
Alternatively you can open dialer app and enter:*#*#2846579#*#*, this will open Projectmenu. Tap on Software upgrade, SD Upgrade, 'yes'. Phone will reboot to dload mode and start update.
Click to expand...
Click to collapse
So I cant find firmware with my same region (C212) but could I still install firmware for the same model (ALP-L09) but different region? This one for example: Huawei Mate 10 orange all HLRCF ALP-L09 9.0.0.161(C109E4R1P9T8) Firmware 9.0.0 r3 EMUI9.0.0 05014VKY [androidhost.ru].zip
ShadowFlame303 said:
So I cant find firmware with my same region (C212) but could I still install firmware for the same model (ALP-L09) but different region? This one for example: Huawei Mate 10 orange all HLRCF ALP-L09 9.0.0.161(C109E4R1P9T8) Firmware 9.0.0 r3 EMUI9.0.0 05014VKY [androidhost.ru].zip
Click to expand...
Click to collapse
Not without rebranding. Which you would have to unlock to do. (or pre-june firmware where dc is not patched)
ante0 said:
Not without rebranding. Which you would have to unlock to do. (or pre-june firmware where dc is not patched)
Click to expand...
Click to collapse
Oh, nice to know. Since I can't find firmware for my region on androidhost, do you know of any other websites where I could find C212 firmware?
ShadowFlame303 said:
Oh, nice to know. Since I can't find firmware for my region on androidhost, do you know of any other websites where I could find C212 firmware?
Click to expand...
Click to collapse
Would this file work/website work? https://firmware.gem-flash.com/index.php?a=downloads&b=file&id=139570
ante0 said:
Extract the downloaded zip. Go into the Software folder, copy 'dload' folder to the root of a micro sd. Put micro sd in your phone, reboot while holding vol up + down. This will put you in dload mode where update will start (takes a while).
Alternatively you can open dialer app and enter:*#*#2846579#*#*, this will open Projectmenu. Tap on Software upgrade, SD Upgrade, 'yes'. Phone will reboot to dload mode and start update.
Click to expand...
Click to collapse
But the update.app size to large cannot copy to SD card
rickyselva007 said:
But the update.app size to large cannot copy to SD card
Click to expand...
Click to collapse
U need to format sdcard with exfat not fat32 file system due to file size restriction of 4gb for fat32 and NTFS won't work as android cant read.
Pie
ShadowFlame303 said:
Currently on EMUI 8 and looking to update to EMUI 9 but I still haven't received the update. Looking to use the dload method maybe.
I'm on ALP-L09 8.0.0.137 (C212) but it's a custom version I believe. It says "Custum version: CUSTC212D001"
I was wondering if I could download ALP-L09 9.0.0.159 (C212) from FirmwareFinder (Says it's not approved for installation even though it's the same region, probably because I have a custom version from my cellphone provider AT&T Mexico) and install it via the dload method.
Would this brick my phone and how would I do the dload method exactly?
Click to expand...
Click to collapse
No, you can't just download and install it that way first off it is not approved which means your stock recovery won't install it, second there is no "dload" method for upgrades, that only works for service ROMs, and third, if your phone has a carrier provided ROM that is customized, updates will come from the carrier.
---------- Post added at 12:30 PM ---------- Previous post was at 12:27 PM ----------
ShadowFlame303 said:
So I cant find firmware with my same region (C212) but could I still install firmware for the same model (ALP-L09) but different region? This one for example: Huawei Mate 10 orange all HLRCF ALP-L09 9.0.0.161(C109E4R1P9T8) Firmware 9.0.0 r3 EMUI9.0.0 05014VKY [androidhost.ru].zip
Click to expand...
Click to collapse
Nope, doesn't work that way, to use a different region ROM you would have to rebranding your phone to another region.
rickyselva007 said:
But the update.app size to large cannot copy to SD card
Click to expand...
Click to collapse
dload firmware has a sd_update.zip in it. That one you don't extract.
regular update.zip will not work with dload.
ShadowFlame303 said:
Would this file work/website work? https://firmware.gem-flash.com/index.php?a=downloads&b=file&id=139570
Click to expand...
Click to collapse
It's probably the same as the one on FF. So might be a waste of money as you have to pay for it.