FLASHED my phone by sp flash tools to restore stoock jb
it messed wit the imei, i can see baseband but not imei in my phone.....its nvalid and cant find the efs folder in root.......can only bring back imei by nandroid backup...but not in stock rom.......can anyone tel me hw to extract efs frm nandroid backup n repair the phone's imei.....flashing doesnt work........
Use mobile uncle tool to store imiei or search play store to imiei
Sent from my IRIS_501 using xda premium
Solution
Use MTK Droid tools, start the program, when it recognizes your device, press root, it will grant you root acces to your device, then press IMEI/NVRAM and write your IMEI numbers and save, then reboot your device and your IMEI numbers will be ok.
Repaired it with maui meta 3G.
Mtk Droid Tools works Temporarily Not After a Hard Reset. Needed Baseband And modem files Of Mt6577.
Related
Please, can anyone upload nvram.bin of MT6572 for SP Flash Tool.
The reason why I need it is mentioned in the following post:
http://forum.xda-developers.com/showthread.php?p=49706111
threatalive said:
Please, can anyone upload nvram.bin of MT6572 for SP Flash Tool.
The reason why I need it is mentioned in the following post:
http://forum.xda-developers.com/showthread.php?p=49706111
Click to expand...
Click to collapse
Using some others nvram(means you are using their imei) so it is illegal. There are ways to get your imei. First install rom in sp tools then use sn tools or go into engineering mode and write your imei that's it
If you write with engineering mode it is temporary which will go upon factory reset but If you write with sn tools it is permanent and you must have installed vcom drivers and cdc drivers in pc to write with sn tools
Sent from my GT-I9070 using Tapatalk
PradeepMurugan said:
Using some others nvram(means you are using their imei) so it is illegal. There are ways to get your imei. First install rom in sp tools then use sn tools or go into engineering mode and write your imei that's it
If you write with engineering mode it is temporary which will go upon factory reset but If you write with sn tools it is permanent and you must have installed vcom drivers and cdc drivers in pc to write with sn tools
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
I have explained on the link given in my first post that I formatted NVRAM of my phone.
So right now it has no baseband/radio files, and without them SN Tools etc. don't work.
Until I flash these baseband/radio, I can't repair IMEI in any way.
So if someone can provide me with MT6572 nvram.bin, I would flash it and then modify IMEI with SN Tools.
How to load nvram.bin?
I have oposite problem , i have working CWM backup of 4.2.2 from my cubot X6, and working readback from flashtool (my nvram.bin included), when i loaded 4.4.2 i lost IMEIs and nvram warning error in wifi.
SN IMEI writer in meta mode working only for IMEIs , not for MAC adress for me.
So when i have my own working nvram.bin from 4.2.2 , how can i load it in 4.4.2?
Good day People,
I don't want to beat around the bush so, I installed customROM works fine. then I reverted back to stockROM then IMEI is gone.
I tried the Engineering mode thing, I tried multiple IMEI Writers non of them works for me. I always have this error "meta mode entry fail" for some reason I don't know what to do.
I do have an MTK Based phone its dual Sim.
MT6582
Cherry Mobile Fuze Q390
Can someone help me. I don't know if I am on the right thread but it says ask anything.
Thanks in Advance.
phaw16 said:
Good day People,
I don't want to beat around the bush so, I installed customROM works fine. then I reverted back to stockROM then IMEI is gone.
I tried the Engineering mode thing, I tried multiple IMEI Writers non of them works for me. I always have this error "meta mode entry fail" for some reason I don't know what to do.
I do have an MTK Based phone its dual Sim.
MT6582
Cherry Mobile Fuze Q390
Can someone help me. I don't know if I am on the right thread but it says ask anything.
Thanks in Advance.
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/showthread.php?t=2400829
Press Thanks if helped.
hnkotnis said:
Try this
http://forum.xda-developers.com/showthread.php?t=2400829
Press Thanks if helped.
Click to expand...
Click to collapse
I WHOLE formatted my Cherry Mobile Fuze Q390 (MT6582) with SP Flash Tool. Then I flashed the official firmware of this device with SP Flash Tool. I don't have any backups because I am reverting to stock. Now the phone works fine but it does NOT detect the SIM card. Also, the IMEI is shown as "INVALID" for both SIM slots when I input *#06#. When I try to fix IMEI from MTK Droid Tools it shows (ERROR : pttycmd1 device NOT found!). Also, MTK Droid Tools shows (Baseband V -----). I am sure the problem is that when I formatted the phone it wiped the NVRAM region too. So the device has no baseband or radio files right not and also the data/nvram/md folder has nothing in it. Although, WiFI still works perfectly except the annoying NVRAM Warning that I kept on seeing when ever that I wanted to connect to a network. Now the official firmware of Cherry Mobile Fuze Q390 does not contain any nvram.bin file. It does contain the BPLGU file but I can't seem to modify IMEI with SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. I tried using the MTK Engineering mode mode also and tried to write it using the AT+ code but it keeps on saying failed to send command. Probably the SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. only modify the IMEI when the baseband or radio files are already present on the phone. So I think the only way out for me is to flash a nvram.bin using SP Flash Tool or Flash nvram.bin+nvram.tar to MTK Droid Tools which I don't have. Any ideas whether I am on the track or not? If I am, then how can I get the IMEI back on my phone. As you people can see that I have tried a lot of things, so please suggest/advice accordingly and any help would be greatly appreciated.
phaw16 said:
I WHOLE formatted my Cherry Mobile Fuze Q390 (MT6582) with SP Flash Tool. Then I flashed the official firmware of this device with SP Flash Tool. I don't have any backups because I am reverting to stock. Now the phone works fine but it does NOT detect the SIM card. Also, the IMEI is shown as "INVALID" for both SIM slots when I input *#06#. When I try to fix IMEI from MTK Droid Tools it shows (ERROR : pttycmd1 device NOT found!). Also, MTK Droid Tools shows (Baseband V -----). I am sure the problem is that when I formatted the phone it wiped the NVRAM region too. So the device has no baseband or radio files right not and also the data/nvram/md folder has nothing in it. Although, WiFI still works perfectly except the annoying NVRAM Warning that I kept on seeing when ever that I wanted to connect to a network. Now the official firmware of Cherry Mobile Fuze Q390 does not contain any nvram.bin file. It does contain the BPLGU file but I can't seem to modify IMEI with SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. I tried using the MTK Engineering mode mode also and tried to write it using the AT+ code but it keeps on saying failed to send command. Probably the SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. only modify the IMEI when the baseband or radio files are already present on the phone. So I think the only way out for me is to flash a nvram.bin using SP Flash Tool or Flash nvram.bin+nvram.tar to MTK Droid Tools which I don't have. Any ideas whether I am on the track or not? If I am, then how can I get the IMEI back on my phone. As you people can see that I have tried a lot of things, so please suggest/advice accordingly and any help would be greatly appreciated.
Click to expand...
Click to collapse
Hello can you provide me a link where i can download cherry mobile fuze stock firmware thanks you very much
phaw16 said:
I WHOLE formatted my Cherry Mobile Fuze Q390 (MT6582) with SP Flash Tool. Then I flashed the official firmware of this device with SP Flash Tool. I don't have any backups because I am reverting to stock. Now the phone works fine but it does NOT detect the SIM card. Also, the IMEI is shown as "INVALID" for both SIM slots when I input *#06#. When I try to fix IMEI from MTK Droid Tools it shows (ERROR : pttycmd1 device NOT found!). Also, MTK Droid Tools shows (Baseband V -----). I am sure the problem is that when I formatted the phone it wiped the NVRAM region too. So the device has no baseband or radio files right not and also the data/nvram/md folder has nothing in it. Although, WiFI still works perfectly except the annoying NVRAM Warning that I kept on seeing when ever that I wanted to connect to a network. Now the official firmware of Cherry Mobile Fuze Q390 does not contain any nvram.bin file. It does contain the BPLGU file but I can't seem to modify IMEI with SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. I tried using the MTK Engineering mode mode also and tried to write it using the AT+ code but it keeps on saying failed to send command. Probably the SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. only modify the IMEI when the baseband or radio files are already present on the phone. So I think the only way out for me is to flash a nvram.bin using SP Flash Tool or Flash nvram.bin+nvram.tar to MTK Droid Tools which I don't have. Any ideas whether I am on the track or not? If I am, then how can I get the IMEI back on my phone. As you people can see that I have tried a lot of things, so please suggest/advice accordingly and any help would be greatly appreciated.
Click to expand...
Click to collapse
hey dude .did your phone fix??
a114 user mt6582
hi dude did u resolve that ..now i got that problem man ..the thing which happend to u turned to me just formatted completley and now suffering...searching solutions for two days....jus tell me if u find the solution dude ... email to [email protected]
we have a same problem.
I fixed my phone (FUZE) ... .
just flash the phone in Firmware with "SEC_RO" file.
Fix IMEI, at least for MT6589 Gigabyte GSmart Aku A1 (if *#06# show Invalid IMEI):
Call *#*#3646633#*#* Engineer mode, Connectivity, CDS Info, Radio Info,
Phone 1: AT+EGMR=1,7,"myIMEI" <send>
Phone 2: AT+EGMR=1,10,"myIMEI2" <send>
Hello @phaw16, @nandhu.crab19 : Can you resolve that problem?
I have the same here my phone is Blu Dash 5.5 D470u with mt6582 processor.
The meta mode is failed to connect. Drivers are ok.
Hello guys! I have a problem with imei. I have a MTK device. I flash it to.upgrade to 4.4 . i lost imei. I try to replace with engineering MTK But not work. If i replace with mtkdroid work But if i Reset the Phone i lost again. I found old backup, if i try to flash it not recognized imei (maybe because for the upgrade i use flash tool into "format all + download"?)
However i try to upgrade again and with mtkdroidtool i replace the nvram. Its OK...But the imei si not Like under the battery. Well ... Write manually imei...work...But Like before if i Reset phone i lost imei But not all !!! On the phone rema in the old wrong imei.
So...i.think ...there si some kind of tool to rewrite imei manuallu forma restore.permantly?
i flashed stockrom of my acer Z530 using sp flashtool.my imei is missing since then.i restored imei using mobile uncle tool after rooting. i cant update my phone after it.i tried several tools such as sn write tool and maui meta 3g . it didn't work for me says "apmetamode enter fail".is anyone have solution here?.
There are only 2 allowed ways.
1. Flash a stock rom (this doesn't always work)
2. Send it to be repaired.
Editing the IMEI is illegal in many places and as such all talks about doing it are banned
Can you go in to recovery mod now
It is rom on acer wed side
Phone bricked, used sp flash tool to unbrick via stock rom I found online, wasn't carefull, selected format all + download instead of download, IMEI went blank. Tried MTK engineering, CDS INFO is nowhere to be found,even tho it is installed in apps, chamelephone, wouldn't work, tried flashing zip made with IMEI Maker, wouldn't work, tried MAUI Meta Tool, wouldn't let me select download IMEI. Also for some reason couldn't install xposed, magisk gives me an error when merging. Really could use some help, Im not very experienced.What to do now?
IAmDubleX said:
Phone bricked, used sp flash tool to unbrick via stock rom I found online, wasn't carefull, selected format all + download instead of download, IMEI went blank. Tried MTK engineering, CDS INFO is nowhere to be found,even tho it is installed in apps, chamelephone, wouldn't work, tried flashing zip made with IMEI Maker, wouldn't work, tried MAUI Meta Tool, wouldn't let me select download IMEI. Also for some reason couldn't install xposed, magisk gives me an error when merging. Really could use some help, Im not very experienced.What to do now?
Click to expand...
Click to collapse
Hello [emoji3]
If you are using mtk phone write IMEI using mtk droidtool or sn writer tool. For tutorials just search how to write IMEI using mtk droidtool or sn writer tool whatever you want to use.
Thanks.
Sent from my Redmi 5A using Tapatalk
Warning altering the imei is illegal in many countries and so is just having the tools to do so. Always be aware of the legal rules in your country.