[Q] touch not working at all on P769 - LG Optimus L9 P760, P765, P768, P769

I decided early this week that i want to have a custom ROM on my phone, so i followed this guide http://forum.xda-developers.com/showthread.php?t=2277639 and i managed to get the eu kdz with root (hex edited bin) on my phone so I will be able to unlock the bootloader, so after waiting half an hour as instructed, I typed the command adb reboot oem-unlock but the phone just booted normally and i didn't see the prompt for unlocking the bootloader, so i thought that maybe it was because i didn't have the T-Mobile radio installed, so I installed the recovery installer and clicked install recovery, and it said install successful, but when i hit reboot recovery it just booted normally and did not boot into recovery, and when going back into the app when the boot was completed i noticed that it said recovery not installed.
now just to make things easier with the whole mirrored mess, i thought that installing the touch drivers for my P769 might help, so i followed these instructions
enter the following commands but before you must put the v6.bin file to your external sd card it is in the downloaded files after you have put it to the root
of your external sd card enter the following commands
"cd c:\Android"
"adb shell"
"su" when you enter this go to your phone and accept the su request
"cat /sdcard/external_sd/v6.bin > /sys/devices/virtual/input/lge_touch/firmware"
after you entered the last command you need to close that command promt and open
another one and type the following commands
"cd c:\Android"
"adb shell"
"su"
"reboot" then it will reboot and the touch will corectly work remember the mirrored problem will continue
Click to expand...
Click to collapse
but i guess that was meant only for the T-Mobile kdz and not for the EU one that i had installed because when i rebooted the phone the touch screen wasn't working at all.... so i thought just to flash back the original T-Mobile kdz and then flash the touch drivers again, but i couldn't change the usb mode to software mode since the touch screen isn't working, and when going into SW update mode by pressing vol up and connecting the usb, the update process stops at 15% saying my phone isn't connected...
so at this point i pretty much gave up in root i just want my phone to work normally again... :crying:
can someone please tell me what to do to get the touch working, or some other way to get back to the T-Mobie kdz?
THANKS:laugh:

Please some help...
Sent from my Evo 3D CDMA using Tapatalk 4

aryehzev said:
Please some help...
Sent from my Evo 3D CDMA using Tapatalk 4
Click to expand...
Click to collapse
1. Please read http://forum.xda-developers.com/show....php?t=2411265
or
2. Use LG mobile support tool to recover your phone
- Boot you phone in S/W upload mode. To do this, turn off your phone, take off battery, hold down vol- button while re-connect ubs cable wait about 5-8 sec. After S/W update screen appear insert you battery. (You may need to install LG usb driver first)
- Open LG mobile support. (if it's not installed, search for it and download from lg site, http://tool.xcdn.gdms.lge.com/client...2CAppSetup.exe)
- LG mobile support should show your phone info
- Select Customer Support > Recover
- And wait for program to download and flash your phone (1 - 2 hours)

artit said:
1. Please read http://forum.xda-developers.com/show....php?t=2411265
or
2. Use LG mobile support tool to recover your phone
- Boot you phone in S/W upload mode. To do this, turn off your phone, take off battery, hold down vol- button while re-connect ubs cable wait about 5-8 sec. After S/W update screen appear insert you battery. (You may need to install LG usb driver first)
- Open LG mobile support. (if it's not installed, search for it and download from lg site, http://tool.xcdn.gdms.lge.com/client...2CAppSetup.exe)
- LG mobile support should show your phone info
- Select Customer Support > Recover
- And wait for program to download and flash your phone (1 - 2 hours)
Click to expand...
Click to collapse
Will it know i have a p769 even if i have a p760 rom on the phone?
Sent from my Evo 3D CDMA using Tapatalk 4

aryehzev said:
Will it know i have a p769 even if i have a p760 rom on the phone?
Sent from my Evo 3D CDMA using Tapatalk 4
Click to expand...
Click to collapse
I think it read phone IMEI to verify which rom to load so it should work.

artit said:
I think it read phone IMEI to verify which rom to load so it should work.
Click to expand...
Click to collapse
i know the old version has the customer support option, but the new one doesnt and it automatically updates on start up.

Related

my phone dosent get out to Software Upgrade Mode

I've been trying to flash my p768 for JB V20A VIETNAM. i used V20A TELCEL, MEXICO Before this flashing.
So I started flashing the KDZ file, followed all the necessary steps and finally when the process is at 15 percent, flashing stopped saying there is a problem with communication between cell phone and pc.
So i did the workoaround, remove the usb cable and wait for at least 10 secs and reconnect, then waited for all the drivers to install. After restarting the whole process it got stack still at 15 percent. Now I cannot get out of Software update mode even if I remove the battery and start the device again.
also i use Following method. and it dosent work. and at 15 percent, flashing stopped saying there is a problem with communication between cell phone and pc Again.
method:If you were on JB, the phone won't be recognized on "S/W Update" screen by the offline method. You must use the online method :
- Remove the lines you put in your "hosts" file ("127.0.0.1 csmg.lgmobile.com" and "127.0.0.1 csmgdl.lgmobile.com") then reboot your computer
- Connect your phone (on the "S/W Update" mode)
- Directly start "B2CAppSetup.exe" : it should detect your phone
- Click on "Customer Support" then "Recovery Phone" (see screenshot on http://forum.xda-developers.com/show....php?t=2217710)
- Wait and pray... It can be long because it downloads the last KDZ file from official LG servers.
plz help meeee
saman_z1384 said:
I've been trying to flash my p768 for JB V20A VIETNAM. i used V20A TELCEL, MEXICO Before this flashing.
So I started flashing the KDZ file, followed all the necessary steps and finally when the process is at 15 percent, flashing stopped saying there is a problem with communication between cell phone and pc.
So i did the workoaround, remove the usb cable and wait for at least 10 secs and reconnect, then waited for all the drivers to install. After restarting the whole process it got stack still at 15 percent. Now I cannot get out of Software update mode even if I remove the battery and start the device again.
also i use Following method. and it dosent work. and at 15 percent, flashing stopped saying there is a problem with communication between cell phone and pc Again.
method:If you were on JB, the phone won't be recognized on "S/W Update" screen by the offline method. You must use the online method :
- Remove the lines you put in your "hosts" file ("127.0.0.1 csmg.lgmobile.com" and "127.0.0.1 csmgdl.lgmobile.com") then reboot your computer
- Connect your phone (on the "S/W Update" mode)
- Directly start "B2CAppSetup.exe" : it should detect your phone
- Click on "Customer Support" then "Recovery Phone" (see screenshot on http://forum.xda-developers.com/show....php?t=2217710)
- Wait and pray... It can be long because it downloads the last KDZ file from official LG servers.
plz help meeee
Click to expand...
Click to collapse
use offline flashing, or CWM restore
cgigate said:
use offline flashing, or CWM restore
Click to expand...
Click to collapse
offline flashing dosent work.
how does CWM restore??
when i turne on or connect battery to my phone Software update mode is appear. help plz
saman_z1384 said:
offline flashing dosent work.
how does CWM restore??
when i turne on or connect battery to my phone Software update mode is appear. help plz
Click to expand...
Click to collapse
Download a cwm rooted backup from this link http://forum.xda-developers.com/showthread.php?t=2136204, copy it to your sd card, access recovery and after doing wipes restore from external sd card. If you have any problem say it here.
hugoglezp said:
Download a cwm rooted backup from this link http://forum.xda-developers.com/showthread.php?t=2136204, copy it to your sd card, access recovery and after doing wipes restore from external sd card. If you have any problem say it here.
Click to expand...
Click to collapse
my phone didnt root so i dont have cwm. and it shows just Software Upgrade Mode screen when turn on it. and dosent get out this mode.
. so how i use cwm rooted backup??
saman_z1384 said:
my phone didnt root so i dont have cwm. and it shows just Software Upgrade Mode screen when turn on it. and dosent get out this mode.
. so how i use cwm rooted backup??
Click to expand...
Click to collapse
forget about cwm,
hard/factory reset your phone ; turn it off, press vol- & home & power on
remove all lg drivers and software etc, reboot pc and install lg pc suit , try recovery from there
Lelus said:
forget about cwm,
hard/factory reset your phone ; turn it off, press vol- & home & power on
remove all lg drivers and software etc, reboot pc and install lg pc suit , try recovery from there
Click to expand...
Click to collapse
in try to to hard factory reset when i hold turn on Software update mode appear quicly!! and when i'm holding it for 10 seconds my phone go to turn off.
does it mean hard reset applied?
saman_z1384 said:
in try to to hard factory reset when i hold turn on Software update mode appear quicly!! and when i'm holding it for 10 seconds my phone go to turn off.
does it mean hard reset applied?
Click to expand...
Click to collapse
you are in upgrade mode, you need flash kdz directly. i killed my phone many times.
if you still not get , sold as "none working for parts on eBay "
Sent from my LG-E970 using Tapatalk HD
any body help mee???? :|
The LG Update Tool can install latest drivers for you: did you properly install them ? If your phone can start in "S/W Update" mode, the online unbricking method should work, that's why I think you have a driver issue. Did you also try on another computer with another Windows version ? (the most "driver friendly" version would be a Windows XP at least on SP2).
OperationNT said:
The LG Update Tool can install latest drivers for you: did you properly install them ? If your phone can start in "S/W Update" mode, the online unbricking method should work, that's why I think you have a driver issue. Did you also try on another computer with another Windows version ? (the most "driver friendly" version would be a Windows XP at least on SP2).
Click to expand...
Click to collapse
yes i try by 3 cpmputer. they have win 7. but it doesnt fix
1: download and unpack xufix.7z
2: use this guide to fastboot your phone, follow what sguerrini97 wrote in 1st post rather than what omap4boot app says
3: run start.bat as administrator
4: put your phone into sw upgrade mode - turn it off, remove battery , hold vol+ and power and plug the usb cable ,"S/W Upgrade" will appear on the screen after a few seconds, put battery back in.
5: use online or offline method to flash any kdz for 768
Lelus said:
1: download and unpack xufix.7z
2: use this guide to fastboot your phone, follow what sguerrini97 wrote in 1st post rather than what omap4boot app says
3: run start.bat as administrator
4: put your phone into sw upgrade mode - turn it off, remove battery , hold vol+ and power and plug the usb cable ,"S/W Upgrade" will appear on the screen after a few seconds, put battery back in.
5: use online or offline method to flash any kdz for 768
Click to expand...
Click to collapse
tnx lelus. i hope it work
same problem with P769
Will watch this fix for results. I have same issue with P769 which has been stuck in s/w upgrade loop after offline server crashed. was at point of 12 bin files in appdata phone folder when server stopped.
Lelus said:
1: download and unpack xufix.7z
2: use this guide to fastboot your phone, follow what sguerrini97 wrote in 1st post rather than what omap4boot app says
3: run start.bat as administrator
4: put your phone into sw upgrade mode - turn it off, remove battery , hold vol+ and power and plug the usb cable ,"S/W Upgrade" will appear on the screen after a few seconds, put battery back in.
5: use online or offline method to flash any kdz for 768
Click to expand...
Click to collapse
when i run start.bat and plug the usb cable. that says flash x-loader p1.bin <waiting foe device>
and Nothing happen anymore
saman_z1384 said:
when i run start.bat and plug the usb cable. that says flash x-loader p1.bin <waiting foe device>
and Nothing happen anymore
Click to expand...
Click to collapse
you have to fastboot your phone first then run start.bat
Lelus can you please post theses files for P769 I have T-Mobile V20D USA stuck in s/w ugrade mode? Many thanks and I hit the button.
dish53 said:
Lelus can you please post theses files for P769 I have T-Mobile V20D USA stuck in s/w ugrade mode? Many thanks and I hit the button.
Click to expand...
Click to collapse
http://forum.xda-developers.com/attachment.php?attachmentid=1971743&d=1368878496
When I fastbooted I get LG logo screen in reverse - which is something different from s/w upgrade I had before -- but then I open cmd prompt and run start.bat I get waiting for device
dish53 said:
When I fastbooted I get LG logo screen in reverse - which is something different from s/w upgrade I had before -- but then I open cmd prompt and run start.bat I get waiting for device
Click to expand...
Click to collapse
you need to install fastboot drivers twice, once before you run the omap4fastboot and again after running it when you see that mirrored fastboot text

[Q] [HELP] LG Optimus L9 P769 (TMO) Soft-Brick

OK, I will start off by saying I have (nearly) completely screwed myself.
I have a P769 (TMO; does this mean BK?).
I followed this (http://forum.xda-developers.com/showthread.php?p=38677123http://forum.xda-developers.com/showthread.php?p=38677123) to root the device and successfully made it through (using V20D KDZ).
Then then tried to flash this ROM (http://forum.xda-developers.com/showthread.php?t=2335984). Unforunately, I did not have an unlocked bootloader and now I am receiving a Security Error at boot. Even more unfortunate is that I did NOT do a backup so I am truly in a bad place now.
I tried to run through the first step of rooting but the software will not detect the phone as being connected and tells me to connect the USB cable. I have installed the drivers that are in that post but admittedly I may have updated them after rooting.
At this point I only have access to fastboot so I am trying that method but I cannot find any system.img files to be able to flash the system partition.
What do I do now? Can anyone help me? I have exhausted every Google search and XDA search. I may be missing something but I feel I am in a very bad place now and need to get this phone back up and running.
thchipmunk said:
OK, I will start off by saying I have (nearly) completely screwed myself.
I have a P769 (TMO; does this mean BK?).
I followed this (http://forum.xda-developers.com/showthread.php?p=38677123http://forum.xda-developers.com/showthread.php?p=38677123) to root the device and successfully made it through (using V20D KDZ).
Then then tried to flash this ROM (http://forum.xda-developers.com/showthread.php?t=2335984). Unforunately, I did not have an unlocked bootloader and now I am receiving a Security Error at boot. Even more unfortunate is that I did NOT do a backup so I am truly in a bad place now.
I tried to run through the first step of rooting but the software will not detect the phone as being connected and tells me to connect the USB cable. I have installed the drivers that are in that post but admittedly I may have updated them after rooting.
At this point I only have access to fastboot so I am trying that method but I cannot find any system.img files to be able to flash the system partition.
What do I do now? Can anyone help me? I have exhausted every Google search and XDA search. I may be missing something but I feel I am in a very bad place now and need to get this phone back up and running.
Click to expand...
Click to collapse
A system.img is to big to flash in fastboot. Follow Lelus directions http://forum.xda-developers.com/showpost.php?p=43021469&postcount=5
Sent from my LGMS769 using xda app-developers app
kuma82 said:
A system.img is to big to flash in fastboot. Follow Lelus directions http://forum.xda-developers.com/showpost.php?p=43021469&postcount=5
Sent from my LGMS769 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the suggestion. I just tried it and I get an error"
Updating is not possible any longer due to a fatal error while the LG Mobile Phone Software Update.
Click to expand...
Click to collapse
I am still getting the security error even though other threads said I should be able to get rid of it.
Is it possible to create a custom update.zip to flash with?
When I do the recovery it returns my phone as a P769BKGO if that helps with anything.
thchipmunk said:
Thanks for the suggestion. I just tried it and I get an error"
I am still getting the security error even though other threads said I should be able to get rid of it.
Is it possible to create a custom update.zip to flash with?
Click to expand...
Click to collapse
What os are you running also what kdz are you trying to flash ?
Lelus said:
What os are you running also what kdz are you trying to flash ?
Click to expand...
Click to collapse
I am running 32-bit Windows 7 Professional Service Pack 1. I tried flashing V20D_00.kdz (using the offline flash) as well as the V10G_00.kdz and V10E_00.kdz.
Using the offline flash method I constantly get the error of cannot connect to phone no matter how many times I restart the PC or phone and unplug USB.
thchipmunk said:
I am running 32-bit Windows 7 Professional Service Pack 1. I tried flashing V20D_00.kdz (using the offline flash) as well as the V10G_00.kdz and V10E_00.kdz.
Using the offline flash method I constantly get the error of cannot connect to phone no matter how many times I restart the PC or phone and unplug USB.
Click to expand...
Click to collapse
you already flashed ics xloader and uboot with fastboot and kdz files names are all CAPS right ?
Lelus said:
you already flashed ics xloader and uboot with fastboot and kdz files names are all CAPS right ?
Click to expand...
Click to collapse
All caps, correct.
Should I do fastboot and then run the offline method?
I did do the fastboot then tried the recovery phone option from the support tool.
I did find a recovery I made that included (for some reason) only the recovery and boot.
thchipmunk said:
All caps, correct.
Should I do fastboot and then run the offline method?
I did do the fastboot then tried the recovery phone option from the support tool.
I did find a recovery I made that included (for some reason) only the recovery and boot.
Click to expand...
Click to collapse
Don't worry about stock recovery it's useless, just flash ics xloader and uboot http://forum.xda-developers.com/showthread.php?t=2292828 option #5
, put your phone into s/w upgrade mode and try offline method
Lelus said:
Don't worry about stock recovery it's useless, just flash ics xloader and uboot http://forum.xda-developers.com/showthread.php?t=2292828 option #5
, put your phone into s/w upgrade mode and try offline method
Click to expand...
Click to collapse
I'll reboot and then try that again. I'll check back afterwards.
Should I do anything extra like start the offline flash from scratch as far as drivers? I'm not even sure where to begin in regards to what drivers/files to remove.
Thank you! Thank you! Thank you!
Now I just need to figure out the screen calibration.
Also, what can I do with this now? Do I need to unlock the bootloader to load custom ROMs without getting a security error?
Sorry for my lack of knowledge. My last phone was a Bionic and that was the easiest phone to root and add a ROM to.
unfortunately i find myself in this situation
gettin security error after what i assume was me trying to flash on a locked bootloader
anyway, i can't figure this out, the whole flashing fastboot and what not
i read through the readme and installed the drivers for the "other/unknown" device that pops up
this is what i try to do next
open up start.bat
enter 5 and hit enter
remove battery from phone (as instructed) and hit any key
boot phone into sw upgrade (holding vol up and plugging in usb cable)
device seems to be picked up and i see the "wait 5 seconds" (german?) and the image is revered horizontally on my phone
now after 4/5 seconds it says "waiting for device", which then i put the battery in
but NOTHING happens after this, it hangs at "waiting for device"
can someone please tell me what i'm doing wrong?
otherwise i think i'm left with a totally effed lg optimus l9
rotatorkuf said:
unfortunately i find myself in this situation
gettin security error after what i assume was me trying to flash on a locked bootloader
anyway, i can't figure this out, the whole flashing fastboot and what not
i read through the readme and installed the drivers for the "other/unknown" device that pops up
this is what i try to do next
open up start.bat
enter 5 and hit enter
remove battery from phone (as instructed) and hit any key
boot phone into sw upgrade (holding vol up and plugging in usb cable)
device seems to be picked up and i see the "wait 5 seconds" (german?) and the image is revered horizontally on my phone
now after 4/5 seconds it says "waiting for device", which then i put the battery in
but NOTHING happens after this, it hangs at "waiting for device"
can someone please tell me what i'm doing wrong?
otherwise i think i'm left with a totally effed lg optimus l9
Click to expand...
Click to collapse
Odds are, you are doing nothing wrong. Check your android version, if you are on 4.2+ (JellyBean) you can't unlock your bootloader quite yet. Here is the thread you should keep track of at the moment http://forum.xda-developers.com/showthread.php?t=2277639&page=152
Insert battery more quickly
rotatorkuf said:
unfortunately i find myself in this situation
gettin security error after what i assume was me trying to flash on a locked bootloader
anyway, i can't figure this out, the whole flashing fastboot and what not
i read through the readme and installed the drivers for the "other/unknown" device that pops up
this is what i try to do next
open up start.bat
enter 5 and hit enter
remove battery from phone (as instructed) and hit any key
boot phone into sw upgrade (holding vol up and plugging in usb cable)
device seems to be picked up and i see the "wait 5 seconds" (german?) and the image is revered horizontally on my phone
now after 4/5 seconds it says "waiting for device", which then i put the battery in
but NOTHING happens after this, it hangs at "waiting for device"
can someone please tell me what i'm doing wrong?
otherwise i think i'm left with a totally effed lg optimus l9
Click to expand...
Click to collapse
I've found that the process completes if you put the battery back in , right after you reconnect the USB.
mven45 said:
I've found that the process completes if you put the battery back in , right after you reconnect the USB.
Click to expand...
Click to collapse
hi iam in the same boat have you figured any thing out please help i also may have found away if you by chance had your lg pc suit installed and setup prior to this mishap
maso321 said:
hi iam in the same boat have you figured any thing out please help i also may have found away if you by chance had your lg pc suit installed and setup prior to this mishap
Click to expand...
Click to collapse
If you're running a Windows 8 OS, that's the reason it's not working.
Sent from my LGMS769 using XDA Premium 4 mobile app
rotatorkuf said:
unfortunately i find myself in this situation
gettin security error after what i assume was me trying to flash on a locked bootloader
anyway, i can't figure this out, the whole flashing fastboot and what not
i read through the readme and installed the drivers for the "other/unknown" device that pops up
this is what i try to do next
open up start.bat
enter 5 and hit enter
remove battery from phone (as instructed) and hit any key
boot phone into sw upgrade (holding vol up and plugging in usb cable)
device seems to be picked up and i see the "wait 5 seconds" (german?) and the image is revered horizontally on my phone
now after 4/5 seconds it says "waiting for device", which then i put the battery in
but NOTHING happens after this, it hangs at "waiting for device"
can someone please tell me what i'm doing wrong?
otherwise i think i'm left with a totally effed lg optimus l9
Click to expand...
Click to collapse
Take out battery and USB cable from phone
Enter #5
Plug in USB when it tells you
Wait 5 seconds or less then place battery in
once in fastboot mode remove battery for a couple of seconds then replace
take out the usb press the vol + then reconnect
S/W upgrade mode achieved.
Flash accordingly. . .
Nathan.7118391 said:
Take out battery and USB cable from phone
Enter #5
Plug in USB when it tells you
Wait 5 seconds or less then place battery in
once in fastboot mode remove battery for a couple of seconds then replace
take out the usb press the vol + then reconnect
S/W upgrade mode achieved.
Flash accordingly. . .
Click to expand...
Click to collapse
Hey Nathan did you ever get your device operating again?
Sent from my LGMS769 using XDA Premium 4 mobile app
kuma82 said:
Hey Nathan did you ever get your device operating again?
Sent from my LGMS769 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Nope! I had to do a warranty exchange. I was copying the system image then I thought it finished so I unplugged the phone. May I tried my best to get the phone back but I could only get into fastboot mode, but hey lesson learned. Though I did see this tool that someone here was trying to use to flash bin and fls files in 3 minutes! But it only works for p790 Optimus black. Which sucks because I could get my phone into an inverted S/W upgrade mode (yeah I know it's on the real one) but it only lasted for about 3 minutes then shut down so doing the offline fix just took too long. I would get to about 23% install and the phone would just turn off. . so close! LOL
EDIT: YEAH got the phone to finally work! No exchange now, take that LG! Just kept trying there offline fix
Nathan.7118391 said:
Nope! I had to do a warranty exchange. I was copying the system image then I thought it finished so I unplugged the phone. May I tried my best to get the phone back but I could only get into fastboot mode, but hey lesson learned. Though I did see this tool that someone here was trying to use to flash bin and fls files in 3 minutes! But it only works for p790 Optimus black. Which sucks because I could get my phone into an inverted S/W upgrade mode (yeah I know it's on the real one) but it only lasted for about 3 minutes then shut down so doing the offline fix just took too long. I would get to about 23% install and the phone would just turn off. . so close! LOL
EDIT: YEAH got the phone to finally work! No exchange now, take that LG! Just kept trying there offline fix
Click to expand...
Click to collapse
I'm trying to restore my P769 to stock (Stuck LG logo), and getting nowhere.
How did you get the flash to work? What error did you get when the phone would turn off? How did you get the inverted S/W mode?
My phone only got to 17-20% before getting an connection error using the offline booth method, this was with both JB and ICS u-boot/boot/recovery .imgs from the P769 ROMs--should I try the steps in unlocking the bootloader to at least get to a bootable state?
Nathan.7118391 said:
Nope! I had to do a warranty exchange. I was copying the system image then I thought it finished so I unplugged the phone. May I tried my best to get the phone back but I could only get into fastboot mode, but hey lesson learned. Though I did see this tool that someone here was trying to use to flash bin and fls files in 3 minutes! But it only works for p790 Optimus black. Which sucks because I could get my phone into an inverted S/W upgrade mode (yeah I know it's on the real one) but it only lasted for about 3 minutes then shut down so doing the offline fix just took too long. I would get to about 23% install and the phone would just turn off. . so close! LOL
EDIT: YEAH got the phone to finally work! No exchange now, take that LG! Just kept trying there offline fix
Click to expand...
Click to collapse
How did you solve this? I am at the same steps, I get into mirrored software mode and then I attempt the offline fix. I have even started the offline fix early to save time. And yet it will only stay on for 2 and a half minutes or so and then shuts off. The farthest i have been able to get it to go is 41%. I have tried fastboot mode to try and send boot.img and it just says that it cannot find the boot partition. So it looks like my only option is the offline fix but it doesn't have enough time to complete. I have tried about 20 or so times how many tries did it take for you? Did you do anything special to get it to finish? any advice on how to get it to finish? Spent about 6 hrs last night trying to get this phone back up and running and this is where i am stuck. Its lame cuz i woke up to the phone like this it was fine when i went to bed. And was for months.

L9 Security Error

i Was on JB V20A and i installed the root and the CWM and try to put cwm. to check if bootloader was still locked well it does.
and now im stock on L9 Security error.
i can enter on S/W and tryin using the "UpTestEX_mod2_marwin" the Window enabler and the Http.exe to flash it but.
i try phone mode CS_emergency and emergency but when it start to check the phone it stuck on 15% and i can turn on the phone (thats the way i used to bypass the 15% and get with the instalation)
so what now? i can enter on S/W and Recovery Mode LG (This mode is for data backip at service center. after reboting press power key to keep using phone), still can do hard reset pressing volumen less home and power but nothing happen keep with the error.
i know while the phone turn on there's a solution.
my phone is L9 p768g
just don't view the post and ignore. :/
TY for all the view and the 900000 helps. nvm i solved ty to my fb L9 friends so... jodan
Jctatis said:
TY for all the view and the 900000 helps. nvm i solved ty to my fb L9 friends so... jodan
Click to expand...
Click to collapse
I have the same situation, may I know what your solution is?
twinwoods said:
I have the same situation, may I know what your solution is?
Click to expand...
Click to collapse
This case is very simple to solve. When you try to install a custom recovery with your bootloader locked, the phone system detects it and give you a message of an error in security, like in your case. To solve this, you'll need to reflash your rom. By doing this, the KDZ will reflash the original recovery and you will be able to access your phone/recovery again.
Step by step:
1. You need to install fastboot drivers: http://forum.xda-developers.com/showthread.php?t=2119090
Turn off the phone and remove the battery. Download THIS and exctract it to C:/. Open device manager in windows (Rigt click on Computer > Manage > Device manager) and connect your phone without the battery to pc via USB cable. Look in device manager for a new hardware connected, right click on it and click in update drivers. In the window open, select "Search for software driver in the computer" and in the window open select insert C:\fastboot\usb_drv_windows, tick the option "include subfolders" and advance. A pop up window may appear asking you if you do want to install the driver, choose YES and the drivers will install.
2. Navigate to the folder you extracted (C:/fastboot) and double click on start.bat. It will ask you for administrator privileges, just say yes.
3. Select your phone model (2 for P760, 3 for P765, 4 for P768 and 5 for P769). It will ask you to turn off your phone and remove battery. When you done with that, press enter. It will now ask you to insert USB cable with the phone without the battery and after 4 seconds re-insert the battery. Onde you done with that, it wil return a message to press any key. In this step the fastboot drivers may be installed again. Don't worry, it's normal
4. Remove the battery again, wait a few seconds and re-insert it.
5. Plug the USB cable in the phone with the battery in and let VOL UP pressed. The phone will enter in SW Update mode.
6. Follow THIS to reflash your rom. A list of avaiable official roms of different models is HERE. Remember to only flash roms made for your phone model or you may get some issues.
7. You're all done I recommend using THIS TWEAK, the phone becomes more responsive.
*** If you flashed a JellyBean rom (V20X.kdz) you can easily root with THIS and if you want CWM recovery use THIS ONE ------ REMEMBER NOT TO FLASH ANY CUSTOM ROM WITH THIS RECOVERY BECAUSE I'M CONSIDERING YOUR BOOTLOADER IS LOCKED AND FOR THIS REASON, YOU CANNOT FLASH CUSTOM ROMS WITH CWM, IT JUST DOESNT WORK!!!
Hope it help you
It works!!
shucrut said:
This case is very simple to solve. When you try to install a custom recovery with your bootloader locked, the phone system detects it and give you a message of an error in security, like in your case. To solve this, you'll need to reflash your rom. By doing this, the KDZ will reflash the original recovery and you will be able to access your phone/recovery again.
Step by step:
1. You need to install fastboot drivers:
Turn off the phone and remove the battery. Download THIS and exctract it to C:/. Open device manager in windows (Rigt click on Computer > Manage > Device manager) and connect your phone without the battery to pc via USB cable. Look in device manager for a new hardware connected, right click on it and click in update drivers. In the window open, select "Search for software driver in the computer" and in the window open select insert C:\fastboot\usb_drv_windows, tick the option "include subfolders" and advance. A pop up window may appear asking you if you do want to install the driver, choose YES and the drivers will install.
2. Navigate to the folder you extracted (C:/fastboot) and double click on start.bat. It will ask you for administrator privileges, just say yes.
3. Select your phone model (2 for P760, 3 for P765, 4 for P768 and 5 for P769). It will ask you to turn off your phone and remove battery. When you done with that, press enter. It will now ask you to insert USB cable with the phone without the battery and after 4 seconds re-insert the battery. Onde you done with that, it wil return a message to press any key. In this step the fastboot drivers may be installed again. Don't worry, it's normal
4. Remove the battery again, wait a few seconds and re-insert it.
5. Plug the USB cable in the phone with the battery in and let VOL UP pressed. The phone will enter in SW Update mode.
6. Follow THIS to reflash your rom. A list of avaiable official roms of different models is HERE Remember to only flash roms made for your phone model or you may get some issues.
7. You're all done I recommend using THIS TWEAK , the phone becomes more responsive.
*** If you flashed a JellyBean rom (V20X.kdz) you can easily root with THIS and if you want CWM recovery use THIS ONE ------ REMEMBER NOT TO FLASH ANY CUSTOM ROM WITH THIS RECOVERY BECAUSE I'M CONSIDERING YOUR BOOTLOADER IS LOCKED AND FOR THIS REASON, YOU CANNOT FLASH CUSTOM ROMS WITH CWM, IT JUST DOESNT WORK!!!
Hope it help you
Click to expand...
Click to collapse
Thank you so much. Yes my P769 BOOTLOADER definitely is locked and I can't even root it with all methods provided in xda, I use exactly your method to get my L9 back to life -- although I have to flash it back to original stock but at least it's BACK! Thank you so much. I saw some other people have the same issue but they can't make it work, hopefully your answer shed the light to ALL!
security error just use the lg pc suite and remove the lines or the host put recover via recovery and put your imei and it will start to download the stock Rom
send from cursed G-P768g 4.1.2. Panamà
grupo Facebook L9 latino América: https://m.facebook.com/groups/54638...ity&actorid=1381295152&__user=100001612362905
Thank you soo much!!! you seriously saved me.
shucrut said:
This case is very simple to solve. When you try to install a custom recovery with your bootloader locked, the phone system detects it and give you a message of an error in security, like in your case. To solve this, you'll need to reflash your rom. By doing this, the KDZ will reflash the original recovery and you will be able to access your phone/recovery again.
Step by step:
1. You need to install fastboot drivers: http://forum.xda-developers.com/showthread.php?t=2119090
Turn off the phone and remove the battery. Download THIS and exctract it to C:/. Open device manager in windows (Rigt click on Computer > Manage > Device manager) and connect your phone without the battery to pc via USB cable. Look in device manager for a new hardware connected, right click on it and click in update drivers. In the window open, select "Search for software driver in the computer" and in the window open select insert C:\fastboot\usb_drv_windows, tick the option "include subfolders" and advance. A pop up window may appear asking you if you do want to install the driver, choose YES and the drivers will install.
2. Navigate to the folder you extracted (C:/fastboot) and double click on start.bat. It will ask you for administrator privileges, just say yes.
3. Select your phone model (2 for P760, 3 for P765, 4 for P768 and 5 for P769). It will ask you to turn off your phone and remove battery. When you done with that, press enter. It will now ask you to insert USB cable with the phone without the battery and after 4 seconds re-insert the battery. Onde you done with that, it wil return a message to press any key. In this step the fastboot drivers may be installed again. Don't worry, it's normal
4. Remove the battery again, wait a few seconds and re-insert it.
5. Plug the USB cable in the phone with the battery in and let VOL UP pressed. The phone will enter in SW Update mode.
6. Follow THIS to reflash your rom. A list of avaiable official roms of different models is HERE. Remember to only flash roms made for your phone model or you may get some issues.
7. You're all done I recommend using THIS TWEAK, the phone becomes more responsive.
*** If you flashed a JellyBean rom (V20X.kdz) you can easily root with THIS and if you want CWM recovery use THIS ONE ------ REMEMBER NOT TO FLASH ANY CUSTOM ROM WITH THIS RECOVERY BECAUSE I'M CONSIDERING YOUR BOOTLOADER IS LOCKED AND FOR THIS REASON, YOU CANNOT FLASH CUSTOM ROMS WITH CWM, IT JUST DOESNT WORK!!!
Hope it help you
Click to expand...
Click to collapse
I tried this method and the offline kdz method and here is the trouble I am having.
1. With this method I do everything perfect the device shows up for a couple seconds then it disappears so I cannot go any further.
2. With the offline fix I followed the OP to the letter and when I get to the part where I click on "normal web upgrade" I open it and start the upgrade as stated in the OP and nothing. I get the retry or cancel internet warning and ignore or close it and it will not even try pushing the file.
Anyway I have tried 2 different machines to no avail I am wondering if anyone has had a similar problem and fixed it?
Sent from my GT-I9505G using Tapatalk 2
Didn't work for me! But I tried another method and that saved me from a lot of steps.
Just install the driver and the latest LGMobile Support Tool
Start your phone in Software upgrade mode... Power + Vol up
In the LGMobile Support Tool click on Options and then Upgrade Recovery
Put your IMEI in the option that pops up
Wait for the miracle!
It worked for me ... NO MORE LG SECURITY ERROR
MJHawaii said:
I tried this method and the offline kdz method and here is the trouble I am having.
1. With this method I do everything perfect the device shows up for a couple seconds then it disappears so I cannot go any further.
2. With the offline fix I followed the OP to the letter and when I get to the part where I click on "normal web upgrade" I open it and start the upgrade as stated in the OP and nothing. I get the retry or cancel internet warning and ignore or close it and it will not even try pushing the file.
Anyway I have tried 2 different machines to no avail I am wondering if anyone has had a similar problem and fixed it?
Sent from my GT-I9505G using Tapatalk 2
Click to expand...
Click to collapse
Fixed my phone too. I removed lookout permanently and my phone stopped functioning, so I did the method u said and worked great, I got scared but it worked. Lookout is installed again, I can root again and uproot if I want, it works great again. I recommend this method to all
Sent from my LG-P769 using xda app-developers app
it worked! thanks!
the easiest!!
Owadel said:
Didn't work for me! But I tried another method and that saved me from a lot of steps.
Just install the driver and the latest LGMobile Support Tool
Start your phone in Software upgrade mode... Power + Vol up
In the LGMobile Support Tool click on Options and then Upgrade Recovery
Put your IMEI in the option that pops up
Wait for the miracle!
It worked for me ... NO MORE LG SECURITY ERROR
Click to expand...
Click to collapse
i think this is the easiest method to get back to your "last working condition".. i mean nothng got deleted, nothng chnged.. i'm happy to get rid of the "security error" condition!! thanks a lot
shucrut said:
This case is very simple to solve. When you try to install a custom recovery with your bootloader locked, the phone system detects it and give you a message of an error in security, like in your case. To solve this, you'll need to reflash your rom. By doing this, the KDZ will reflash the original recovery and you will be able to access your phone/recovery again.
Step by step:
1. You need to install fastboot drivers: http://forum.xda-developers.com/showthread.php?t=2119090
Turn off the phone and remove the battery. Download THIS and exctract it to C:/. Open device manager in windows (Rigt click on Computer > Manage > Device manager) and connect your phone without the battery to pc via USB cable. Look in device manager for a new hardware connected, right click on it and click in update drivers. In the window open, select "Search for software driver in the computer" and in the window open select insert C:\fastboot\usb_drv_windows, tick the option "include subfolders" and advance. A pop up window may appear asking you if you do want to install the driver, choose YES and the drivers will install.
2. Navigate to the folder you extracted (C:/fastboot) and double click on start.bat. It will ask you for administrator privileges, just say yes.
3. Select your phone model (2 for P760, 3 for P765, 4 for P768 and 5 for P769). It will ask you to turn off your phone and remove battery. When you done with that, press enter. It will now ask you to insert USB cable with the phone without the battery and after 4 seconds re-insert the battery. Onde you done with that, it wil return a message to press any key. In this step the fastboot drivers may be installed again. Don't worry, it's normal
4. Remove the battery again, wait a few seconds and re-insert it.
5. Plug the USB cable in the phone with the battery in and let VOL UP pressed. The phone will enter in SW Update mode.
6. Follow THIS to reflash your rom. A list of avaiable official roms of different models is HERE. Remember to only flash roms made for your phone model or you may get some issues.
7. You're all done I recommend using THIS TWEAK, the phone becomes more responsive.
*** If you flashed a JellyBean rom (V20X.kdz) you can easily root with THIS and if you want CWM recovery use THIS ONE ------ REMEMBER NOT TO FLASH ANY CUSTOM ROM WITH THIS RECOVERY BECAUSE I'M CONSIDERING YOUR BOOTLOADER IS LOCKED AND FOR THIS REASON, YOU CANNOT FLASH CUSTOM ROMS WITH CWM, IT JUST DOESNT WORK!!!
Hope it help you
Click to expand...
Click to collapse
cant install fastboot drivers windows 10

suggestion unlock bootloader

Hi again guys,
I have a p760 with v20b_00 eu open rom and im trying a lot of time to unlock bootloader
i did everything if you will see here
http://forum.xda-developers.com/showthread.php?t=2221102&page=20
and bootloader is still locked
Any tips? any other guys which will sure unlock my BL at last?
Please
Aristodikos1 said:
Hi again guys,
I have a p760 with v20b_00 eu open rom and im trying a lot of time to unlock bootloader
i did everything if you will see here
http://forum.xda-developers.com/showthread.php?t=2221102&page=20
and bootloader is still locked
Any tips? any other guys which will sure unlock my BL at last?
Please
Click to expand...
Click to collapse
[*]Not for Newbies. (need some experience in flashing and installing fastboot drivers)
Click to expand...
Click to collapse
Sent from my LG-P769 using Tapatalk 4
fastboot
Are you able to fastboot?
Aristodikos1 said:
Hi again guys,
I have a p760 with v20b_00 eu open rom and im trying a lot of time to unlock bootloader
Please
Click to expand...
Click to collapse
thankyouxda said:
Are you able to fastboot?
Click to expand...
Click to collapse
NO
The only think that i can do is to reboot in cwm by artas by holding volume down when the lights flashing but i cannot install cm 10.1 because my bl is still locked. adb reboot oem-unlock is not working correct. When i push it, sometimes reboot with lg logo sometimg shutdown and if i want to power on again i have to hold power button 10 sec and press it again
geeshiet said:
Sent from my LG-P769 using Tapatalk 4
Click to expand...
Click to collapse
i am not so newbie mate, i learn a loto of things in this forum....
Follow this thread (link below) to get fastboot working. Then you can get to the next step. I just posted some instructions from that thread below for FYI.
Batch file command is "start_fastboot.bat" not "start-fastboot.bat"
Also,'when the tool says "Wait 5 seconds" don't wait but put the battery in immediately.
http://forum.xda-developers.com/showthread.php?t=2119090
----------------------------------------------------------------------------------------------------------------
What do you need:
omap4boot, get it from original thread.
Extract omap4boot archive somewhere like C:\omap4boot (I will use this path in the tutorial).
Power off your phone and remove the battery.
Connect your phone (still without the battery) to the PC.
You will hear the sound of a new driver, then the sound of a driver when it disconnects continiusly.
Start -> Right click on "Computer" -> "Manage".
On the left column, click on "Device manager".
You will see a device that appear and disappear under "Other/Unknown Devices".
You must right click on the unknown device before it disappear, once clicked select "Driver Update".
Click on the second button (manually install driver) and insert the "usb_drv_windows" path (C:\omap4boot\usb_drv_windows) and install the driver.
Disconnect the phone from the PC and power it off.
Open a command prompt (Win+R, type cmd and press Enter).
Type the following command in the command prompt:
Code:
cd C:\omap4boot
start-fastboot.bat
Now input 3 (Prada 3.0 P940) and press enter.
Plug the phone without battery to the PC, when the tool says "Wait 5 seconds" put the battery in your phone.
(The first time that you do this, you have to install the drivers again. Repeat step 9)
At the other prompts answer always "N", this could be important.
Now you can use fastboot on L9 Next times you can start from step 12.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Aristodikos1 said:
i am not so newbie mate, i learn a loto of things in this forum....
Click to expand...
Click to collapse
thankyouxda said:
Follow this thread (link below) to get fastboot working. Then you can get to the next step. I just posted some instructions from that thread below for FYI.
Batch file command is "start_fastboot.bat" not "start-fastboot.bat"
Also,'when the tool says "Wait 5 seconds" don't wait but put the battery in immediately.
http://forum.xda-developers.com/showthread.php?t=2119090
----------------------------------------------------------------------------------------------------------------
What do you need:
omap4boot, get it from original thread.
Extract omap4boot archive somewhere like C:\omap4boot (I will use this path in the tutorial).
Power off your phone and remove the battery.
Connect your phone (still without the battery) to the PC.
You will hear the sound of a new driver, then the sound of a driver when it disconnects continiusly.
Start -> Right click on "Computer" -> "Manage".
On the left column, click on "Device manager".
You will see a device that appear and disappear under "Other/Unknown Devices".
You must right click on the unknown device before it disappear, once clicked select "Driver Update".
Click on the second button (manually install driver) and insert the "usb_drv_windows" path (C:\omap4boot\usb_drv_windows) and install the driver.
Disconnect the phone from the PC and power it off.
Open a command prompt (Win+R, type cmd and press Enter).
Type the following command in the command prompt:
Code:
cd C:\omap4boot
start-fastboot.bat
Now input 3 (Prada 3.0 P940) and press enter.
Plug the phone without battery to the PC, when the tool says "Wait 5 seconds" put the battery in your phone.
(The first time that you do this, you have to install the drivers again. Repeat step 9)
At the other prompts answer always "N", this could be important.
Now you can use fastboot on L9 Next times you can start from step 12.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Click to expand...
Click to collapse
thank you for your responce. Actually the bootloader is still locked. Do you thinkis there any tip or cheat that it is not listed in the steps?
Butentering in fastbootmode will not unlock the bootloader. If you followed the steps in general thread and still cant unlock it, we are with the same problem my friend and.. unfortunatelly, still no solution for me
Sent from my LG-P768 using xda app-developers app
if you can fastboot then follow this link below and it should work afaik
http://forum.xda-developers.com/showthread.php?t=2221102
You can ignore the part about installing fastboot drivers since you should have it installed already if you are able to fastboot
And I guess you already have LG driver installed.
"IMPORTANT: You must have P760/P765 with P760 V20B EUROPE OPEN rom flashed on it....or OTHER UNLOCKABLE ROMS"
Aristodikos1 said:
thank you for your responce. Actually the bootloader is still locked. Do you thinkis there any tip or cheat that it is not listed in the steps?
Click to expand...
Click to collapse
thankyouxda said:
if you can fastboot then follow this link below and it should work afaik
http://forum.xda-developers.com/showthread.php?t=2221102
You can ignore the part about installing fastboot drivers since you should have it installed already if you are able to fastboot
And I guess you already have LG driver installed.
"IMPORTANT: You must have P760/P765 with P760 V20B EUROPE OPEN rom flashed on it....or OTHER UNLOCKABLE ROMS"
Click to expand...
Click to collapse
Thank you guys,
First of all i NEVER saw this black fastboot screenin my phone that says "press volume up form unlock bl"
Second, i cannot find EUROPE open 20b...every link is not working
Don't you already have V20B installed per your first post. Otherwise you will have to flash it with the offline method....
if you are able to fastboot you should be able to get to that screen i believe.
Link to KDZ.
http://csmgdl.lgmobile.com/swdata/WD...00/V20B_00.kdz
Aristodikos1 said:
Thank you guys,
First of all i NEVER saw this black fastboot screenin my phone that says "press volume up form unlock bl"
Second, i cannot find EUROPE open 20b...every link is not working
Click to expand...
Click to collapse
If your model p760 you should see a fastboot screen (everything black with dome letters on top). But you can confirm if you are in fastboot mode when you run the start fastboot.bat, open a cmd in the folder that contains fastboot, adb, etc and type fastboot devices
You should see a coupçe of numbers and letters, like in adb devices
If dont appear nothing, your phone doesnt entered in fastboot. Then try flashing ics xloader and uboot and try fastboot again. If your device is seen, you should be able to unlock the bootloader following the tutorial in general thread, always remembering waiting 30 min or more to try
Here you will find v20b europe open:
http://lg-phone-firmware.com/index.php?id_mod=18
The download will not work if you have shttps enabled and hosts file still have the lg related lines. You must remove the 2 lines, save it, close shttps and try download again, now will work
Sent from my LG-P768 using xda app-developers app
shucrut said:
If your model p760 you should see a fastboot screen (everything black with dome letters on top). But you can confirm if you are in fastboot mode when you run the start fastboot.bat, open a cmd in the folder that contains fastboot, adb, etc and type fastboot devices
You should see a coupçe of numbers and letters, like in adb devices
If dont appear nothing, your phone doesnt entered in fastboot. Then try flashing ics xloader and uboot and try fastboot again. If your device is seen, you should be able to unlock the bootloader following the tutorial in general thread, always remembering waiting 30 min or more to try
Here you will find v20b europe open:
http://lg-phone-firmware.com/index.php?id_mod=18
The download will not work if you have shttps enabled and hosts file still have the lg related lines. You must remove the 2 lines, save it, close shttps and try download again, now will work
Sent from my LG-P768 using xda app-developers app
Click to expand...
Click to collapse
yes that hosts file was the problem thanks. Also i already download some x and u but i feel that they are the wrong ones. Can you tell me which ones to download? shall i install them with rooted eu open 20b or with some ics rom?
i never be in fastboot mode. Every time i pushed adb reboot oem-unlock the phone or restarts or turned off (i think)
You can follow this: http://forum.xda-developers.com/showpost.php?p=44325657&postcount=4
Probably will help you a lot in this fastboot thing, i put a link to Lelus's fastboot thread. Downloading the file from there you'll be able to install your phone's xloader and uboot files
Sent from my LG-P768 using xda app-developers app
shucrut said:
You can follow this: http://forum.xda-developers.com/showpost.php?p=44325657&postcount=4
Probably will help you a lot in this fastboot thing, i put a link to Lelus's fastboot thread. Downloading the file from there you'll be able to install your phone's xloader and uboot files
Sent from my LG-P768 using xda app-developers app
Click to expand...
Click to collapse
Ah! so with this only i can unlick my BL? no 30 minutes waiting?
No, im sorry, didnt explained to much. Follow that to flash xloader and uboot and then install V20B europe open with the tutorial i said to you. After that, hard reset the phone (turn it off, turn it on and let pressed vol down and home button). After hard reset the phone will restart. Let phone connected to wifi and make sure your sim card is inserted and you have the network signal, enable usb debugging and connect your phone to pc via usb cable in lg software mode. Then wait 30 minutes (best is to wait at least 1 hour). Open a cmd where adb is (if you downloaded fastboot.zip from the link i gave you, its inside the fastboot/bin folder you extracted) and type the following command:
adb reboot oem-unlock
Your phone should restart and show you a black screen asking if you do want to unlock the bootloader. Press vol up to unlock the bootloader. And thats it, hope it work for you
Sent from my LG-P768 using xda app-developers app
shucrut said:
If your model p760 you should see a fastboot screen (everything black with dome letters on top). But you can confirm if you are in fastboot mode when you run the start fastboot.bat, open a cmd in the folder that contains fastboot, adb, etc and type fastboot devices
You should see a coupçe of numbers and letters, like in adb devices
If dont appear nothing, your phone doesnt entered in fastboot. Then try flashing ics xloader and uboot and try fastboot again. If your device is seen, you should be able to unlock the bootloader following the tutorial in general thread, always remembering waiting 30 min or more to try
Here you will find v20b europe open:
http://lg-phone-firmware.com/index.php?id_mod=18
The download will not work if you have shttps enabled and hosts file still have the lg related lines. You must remove the 2 lines, save it, close shttps and try download again, now will work
Sent from my LG-P768 using xda app-developers app
Click to expand...
Click to collapse
as i read in your post, you told me to install ics x and u for 760, which means i will install ICS x and u with 20b JB roma is that correct?
Guys at last!!!
IS THERE ANYONE WHO HAS LG L9 OPTIMUS P760 (NOT P765/P769/P*******) ONLY P760!!!!!!
WHO UNLOCKED HIS PHONE? IF YES HOW?
WHICH ROM DID HE USED?
WHAT X AND U DID HE USED?
at last tell me
shucrut said:
No, im sorry, didnt explained to much. Follow that to flash xloader and uboot and then install V20B europe open with the tutorial i said to you. After that, hard reset the phone (turn it off, turn it on and let pressed vol down and home button). After hard reset the phone will restart. Let phone connected to wifi and make sure your sim card is inserted and you have the network signal, enable usb debugging and connect your phone to pc via usb cable in lg software mode. Then wait 30 minutes (best is to wait at least 1 hour). Open a cmd where adb is (if you downloaded fastboot.zip from the link i gave you, its inside the fastboot/bin folder you extracted) and type the following command:
adb reboot oem-unlock
Your phone should restart and show you a black screen asking if you do want to unlock the bootloader. Press vol up to unlock the bootloader. And thats it, hope it work for you
Sent from my LG-P768 using xda app-developers app
Click to expand...
Click to collapse
Soory i just saw this message mate. Ok i will do exactly that (according my english your messages sounds more familiar to me)
i will choose order "6" in fastboot that says "x & U for p760 jb (not "2" for ics)
Ok i did this guide
BL is still locked but when i run command adb reboot oem-unlock i saw somethignthat i never saw before
adb server is out of date. killing...
* daemon started successfully *
but the phone shuted down...no restart and to power on again i kept 10 sec power buton and after it powered on.
Question, when i run oem-unlock the fastboot goes immmediatelly or after some time?

[q] softbricked? i think?

So I recently wanted to load a custom rom on my p769.
Unfortunately, I tried to flash a rom without actually having the bootloader unlocked (thought i did?)
Now i'm forever stuck at the "LG Security Error" screen.
I can't seem to do anything else! :'(
The only other mode I can boot into is S/W update screen (holding volume up and plugging in usb cable).
I tried to get to another mode I read about (vol up + vol down then plug usb cable for "download" mode, to no avail)
Anyway, once I do get it into sw update mode, I can't seem to do anything either way, when i try to list adb devices, none are listed, when i try to use lg mobile tool, it never connects, when i try to use kdz offline update tool, it doesn't see the phone, it just keeps trying to connect, the log freaks out at "_IsConnectedPhone Call", and just keeps trying to "connect" to phone but can't
Am I totally screwed here?
What can I do? Any help appreciated!
rotatorkuf said:
So I recently wanted to load a custom rom on my p769.
Unfortunately, I tried to flash a rom without actually having the bootloader unlocked (thought i did?)
Now i'm forever stuck at the "LG Security Error" screen.
I can't seem to do anything else! :'(
The only other mode I can boot into is S/W update screen (holding volume up and plugging in usb cable).
I tried to get to another mode I read about (vol up + vol down then plug usb cable for "download" mode, to no avail)
Anyway, once I do get it into sw update mode, I can't seem to do anything either way, when i try to list adb devices, none are listed, when i try to use lg mobile tool, it never connects, when i try to use kdz offline update tool, it doesn't see the phone, it just keeps trying to connect, the log freaks out at "_IsConnectedPhone Call", and just keeps trying to "connect" to phone but can't
Am I totally screwed here?
What can I do? Any help appreciated!
Click to expand...
Click to collapse
You're on JB, right? KDZ offline flash tool cannot detect phone in JB. you have to flash ICS x-loader/u-boot then that tool can detect your phone. please visit http://forum.xda-developers.com/showthread.php?t=2292828
For LG mobile support tool problem, it need to download rom from LG server. Have you remove/comment 1-2 line that you add to hosts file? You said it never connect that mean it don't see your phone?
artit said:
You're on JB, right? KDZ offline flash tool cannot detect phone in JB. you have to flash ICS x-loader/u-boot then that tool can detect your phone. please visit http://forum.xda-developers.com/showthread.php?t=2292828
For LG mobile support tool problem, it need to download rom from LG server. Have you remove/comment 1-2 line that you add to hosts file? You said it never connect that mean it don't see your phone?
Click to expand...
Click to collapse
I've tried this as well, but I don't know if i'm doing it correctly
I installed the 'drivers' it needs (following the readme file) when it shows the "unknown/other" device (the part where you have to catch it in device manager).
After this, I run the start.bat, enter 5 and hit enter, i unplug my phone and hit any key, then i plug it in as it says and it does it's thing, then i wait for 4 seconds when it begins to say "waiting for device", i put my battery in and it just stays there, waiting for device
Can you help me figure this out? Am I doing something wrong?
rotatorkuf said:
I've tried this as well, but I don't know if i'm doing it correctly
I installed the 'drivers' it needs (following the readme file) when it shows the "unknown/other" device (the part where you have to catch it in device manager).
After this, I run the start.bat, enter 5 and hit enter, i unplug my phone and hit any key, then i plug it in as it says and it does it's thing, then i wait for 4 seconds when it begins to say "waiting for device", i put my battery in and it just stays there, waiting for device
Can you help me figure this out? Am I doing something wrong?
Click to expand...
Click to collapse
Please read these three link
http://forum.xda-developers.com/showpost.php?p=44578108&postcount=34
http://forum.xda-developers.com/showpost.php?p=44653501&postcount=55
http://forum.xda-developers.com/showpost.php?p=43642515&postcount=21
kuma82 said:
Please read these three link
http://forum.xda-developers.com/showpost.php?p=44578108&postcount=34
http://forum.xda-developers.com/showpost.php?p=44653501&postcount=55
http://forum.xda-developers.com/showpost.php?p=43642515&postcount=21
Click to expand...
Click to collapse
i think i'm making some progress, thanks for helping so far!
anyway, i'm able to get fastboot on my phone (i think?), the screen on the phone shows the flipped LG logo and at the top right it says 2.0 fastboot (flipped of course)
but, what am i supposed to do here?
i see the 2 omap devices listed on my device manager
whenever i try to run the kdz offline flash tool (if i'm using the right one), it still doesn't detect the phone as connected, doesn't even try, just errors and tells me to connect to usb port and restart or exit
what am i supposed to do once i'm in fastboot recovery for my phone?
should i comment out the 2 listings i added to the hosts file? should i NOT be running shttps app? which kdz offline flash tool should i be using? (currently trying: UpTestEX_mod2_marwin.exe)
rotatorkuf said:
i think i'm making some progress, thanks for helping so far!
anyway, i'm able to get fastboot on my phone (i think?), the screen on the phone shows the flipped LG logo and at the top right it says 2.0 fastboot (flipped of course)
but, what am i supposed to do here?
i see the 2 omap devices listed on my device manager
whenever i try to run the kdz offline flash tool (if i'm using the right one), it still doesn't detect the phone as connected, doesn't even try, just errors and tells me to connect to usb port and restart or exit
what am i supposed to do once i'm in fastboot recovery for my phone?
should i comment out the 2 listings i added to the hosts file? should i NOT be running shttps app? which kdz offline flash tool should i be using? (currently trying: UpTestEX_mod2_marwin.exe)
Click to expand...
Click to collapse
You should run start.bat and select flash ICS u-boot/x-loader for P769
When it finish, reboot you phone to S/W update mode and try to use UpTestEX_mod2_marwin.exe to flash your P769 kdz again to restore your phone.
Maybe I miss something about P769 model, please search in FAQ forum many people have this issue, and most of them have fixed it.
artit said:
You should run start.bat and select flash ICS u-boot/x-loader for P769
When it finish, reboot you phone to S/W update mode and try to use UpTestEX_mod2_marwin.exe to flash your P769 kdz again to restore your phone.
Maybe I miss something about P769 model, please search in FAQ forum many people have this issue, and most of them have fixed it.
Click to expand...
Click to collapse
you guys are awesome!
finally got my phone back on rooted firmware
now to unlock the bootloader

Categories

Resources