i tried to install gt-i9100g in my gt-i9100 phone(by mistake)..then after that my phone shows some wired actions.
1. It goes dead (doesn't turn on or go to download mode or recovery) and after sometime (variable hours or days) will shows battery icon when left in charging.
2.Then it would work for a couple of hours or days then again goes to first step and eventually return to 2nd step and continues.
3. when phones switches on i installed gb stock rom using odin and also tried jb official and also neat rom but still it goes to 1st step.
can anyone tell me what is the problem and what i can do?
Flash dorimanx and set up a 2nd rom and use that. May Slove the problem may not but either way it's worth trying. Problem is is that you flashed the wrong rom for your model.
Service centre.
MistahBungle said:
Service centre.
Click to expand...
Click to collapse
i gave it to service center and they first did some soldering and put in jb and gave it back. It worked fine fine for two days then again repeated the same actions.
when approached them they replied saying that the motherboard is gone and has to be replaced.
i was thinking if anything could be done other than replacing the motherboard( as it costs INR RS 9000 app..).
2nd hand motheboard from 'donor' phone with broken screen/etc, replace board yourself or pay a local mobile repair shop to do it. Cheaper than a service centre putting a new board in.
If the phone won't boot at all & you have no download/recovery modes (when it's not working) caused by flashing firmware for a different device, what fix exactly would you like anyone here to suggest ?
It might be JTAG'able (though don't get your hopes up), but you're only going to find that out if you take it someone who does JTAG's, and they might charge you money purely to take a look at the phone regardless of whether it's possible to JTAG or not.
Edit - There may also be something hardware-wise going on as well as what you did flashing wrong firmware.
I think it's time for a new phone.
Related
I have been running Siyah 1.7rc1 dual booting Omega v30 as primary and AOKP milestone 1 as secondary. I also have the 4.2 camera and keyboard mods installed. The phone has been working fine until last night.
Last night the phone was fully charged. This morning the phone was off and wouldn't turn on when I pressed the power button. Hoping it was just a depleted battery, I put the phone on the charger for a couple of hours. However, it still won't turn on. I can't get to either recovery mode or download mode with the vol_up+home+power or the vol_down+home+power.
There is no reaction from the phone to any combination of buttons. I have removed the battery a few times with the same results.
Does anyone have any ideas? I might try and see if Samsung service can fix this but wanted to know if there was any advise from XDA.
Well if you do want to go to samsung service """ you have a freaking rooted phone bro"""""",,,BTW your phone is dead.
As repair is chargeable i would first try a new battery or borrow one and a USB jig to boot to recovery mode .
jje
*sob*
Mine has gone exactly the same way.
Had it on charge. Took it off charge and checked emails then left it on my desk. Came back 30 minutes later, picked it up and phone was completely dead.
No light when plugged into a charger, phone won't power on.
Plugged it into a computer, no luck.
Different chargers, different cables, no luck.
Tried a USB jig, no luck.
I've NOT tried a new battery yet, that's next on my list. I suspect this won't make any difference either.
I suggest you send it to samsung bro.
happened to my phone too.
They won't find out you rooted/have custom ROM etc, cause this is caused by hardware failure. They'll need to replace it to get it to boot, so they can't tell if you rooted or not.
LemonPlusTea said:
I suggest you send it to samsung bro.
happened to my phone too.
They won't find out you rooted/have custom ROM etc, cause this is caused by hardware failure. They'll need to replace it to get it to boot, so they can't tell if you rooted or not.
Click to expand...
Click to collapse
take it back to the shop first, if you havent had it too long them may just swap it out. If not then they will send it back for you and should lend you candybar phone to use if you leave them a deposit (depends on the shop though).
Sammy wont even both to check if its been rooted, they will just replace it.
Thanks both. I'm going to send it straight to Samsung as soon as I've found proof of warranty. Hopefully it won't take too long to sort out.
zaphy42 said:
Thanks both. I'm going to send it straight to Samsung as soon as I've found proof of warranty. Hopefully it won't take too long to sort out.
Click to expand...
Click to collapse
Like i said its a paid for repair .
Totally dead mobo that requires change you will probably get away with warranty .
jje
I did try using a friend's battery. No go. I saw another thread on XDA where a bunch of people seem to have hit the same problem in the last week. I am wondering if it is some time-triggerred bug?
randombrick said:
I did try using a friend's battery. No go. I saw another thread on XDA where a bunch of people seem to have hit the same problem in the last week. I am wondering if it is some time-triggerred bug?
Click to expand...
Click to collapse
I've just got round to trying a friends battery too. Likewise, no go.
I think it's probably more likely a design flaw on Samsungs part.
I wonder if they've produced a different revision of the S3 circuit board to fix it? I've heard on other threads that Samsung just replace the system board when it's sent back for warranty repair...
Well there certainly has been quite a lot of them over the last 4 weeks or so. Probably some sub-standard motherboards found their way into the production line every now and then (given the number of units produced), or a design flaw as noted above. It's going to be a reasonably expensive exercise for Samsung if they end up having to replace a lot of them though...
I just hope that the new one they put in my phone isn't going to commit suicide again in 4 months time
Sent from my GT-I9300 using xda premium
I have the exact problem.
But it was my fault in this case. Flashed an "unmatched" md5 file of WanamLite.
It booted up normally. Then i proceeded installing TiBu & restore apps. After 10mins, i came back with a dead phone.
After some googling & advice from phone shops, there's a possibility that the motherboard may be fried.
I sent to Samsung Service Centre, and within 2 working days, my S3 is alive.
Sent from my GT-I9300
Hi,
I have a i9100.
It had an AOKP ROM android version 4.1.X.
I tried to flash a new ROM (Slim ROM) using CWM. It got me to a soft brick (only the slim rom logo appeared when I powered up the phone).
I then downloaded Odin to try getting it unbrick, but I excellently checked the "re-partition" checkbox, and while it was flashing to the samsung stock rom, I unplugged the usb cable (don't ask why I did it, I'm not sure my self).
Now the phone is definitely hard bricked. I took it to a lab, and they did not managed to get it working. I'm guessing they tried a JTAG. So I ordered a JIG from ebay, but the JIG won't get me to download mode. I removed the battery and SIM (don't have sdcard), wait for 15 seconds, put the battery back in, and plugged in the JIG. Nothing happened.
The phone doesn't show any sign of life when it's plugged to the charger or to the computer via USB cable.
Are there any other methods I should try before I give up?
Can I claim my warranty?
Thanks,
Motherboard replacement either by service centre or get a board from a broken/'donor' phone & replace it yourself.
Nobody here can say whether they'll fix it under warranty or not, you're only going to know that if you send it to a service centre. Tell them it died while doing an OTA firmware update (Say as little as possible). Ultimately, given you borked it, they're under no obligation whatsoever to fix it under warranty if they find out you broke it.
So you can either take your chances, or get a 2nd hand board & get a local mobile shop to swap it out for you if you're not confident doing it yourself.
MistahBungle said:
Motherboard replacement either by service centre or get a board from a broken/'donor' phone & replace it yourself.
Nobody here can say whether they'll fix it under warranty or not, you're only going to know that if you send it to a service centre. Tell them it died while doing an OTA firmware update (Say as little as possible). Ultimately, given you borked it, they're under no obligation whatsoever to fix it under warranty if they find out you broke it.
So you can either take your chances, or get a 2nd hand board & get a local mobile shop to swap it out for you if you're not confident doing it yourself.
Click to expand...
Click to collapse
Well, I guess I got nothing to do than try my luck with the warranty.
Thanks for the replay. (didn't found the thanks button for rate)
Yeah, maybe youll accidentally get warranty.
Hi all,
I'm new on this forum so I hope i'm not being rude or something.
I had a custom rom on my S2 and wanted to flash the neatrom. I flashed a new kernel first and flashed the wrong one ( stupid!) and now my phone is completely out.
I don't have access to either recovery or download mode.
Please tell me there's something that can be done...
thanks
Belgarion
Keep trying to get into download mode (home/volume down/power) Try a jig (Unlikely to work, but try one anyway. You never know your luck).
Still no response ?
Service centre or local mobile repair shop. Or it may even be JTAG'able (tho I suspect motherboard replacement is necessary). With respect (and I really do mean that), you're not telling us everything you've done/haven't given us enough information, but I suspect it probably doesn't matter given your phone is likely borked.
when the battery is in the phone, it heats up. So I guess something is trying to work in there right?
Well, i've changed Roms many times.
Right before it got "borked?" i had the a Rom based on the chinese OS, can't find the name again xD My phone told me it didn't have the right version of CF root so it wasn't rooted. Because of that I tried to Flash a new Kernel and I went for the DorimanX, but I took the wrong version of it, the 9.x.
Now you've I told it all
Heating up & no response = dead motherboard. As I said, knowing/not knowing 'it all' doesn't matter in your case. You can either take it to an authorised repairer/service centre for a new motherboard (normally more expensive option), or you can source a 2nd hand one from a 'donor' phone (broken screen/etc but otherwise OK); search online - eBay/Google/etc which you can either swap yourself if you're confident or take to a local mobile repair shop if you're not confident (least expensive option).
If the phone is under warranty, you could always play dumb & send it to a service centre, you never know, you may get lucky & they may fix it gratis. But don't assume they will like many people do; these people sometimes end up disappointed because an authorised repairer/Samsung is under no obligation to repair/replace the phone at their expense given you broke it.
At least now I know I'm ****ed
Thanks for answering so fast
Have a great day/night ^^
Honestly, try a jig & keep trying to get into download mode/recovery. There's also a trick you can try to 'jump start' the phone without the battery using the charger (I believe King Rat was the last person to post this a few mths ago search his posts). Also, connect it to a charger & leave it for as long as it takes to charge from empty/overnight. You could also try another battery (at least you'll have a spare when you get it fixed), but getting warm & no response is normally a bad sign.
These methods are probably unlikely to work, but you have nothing to lose by trying them over & over & you may get lucky.
Hello!
I really hope you guys can help me. I tried to flash a recovery with Odin, and now my phone won't do anything. Its screen stays black, regardless of whether I try to turn it on, or go to recovery or download mode.
Here's some background as to what I did and what I was trying to do:
I had CheckROM RevoHD V6 with CWM Recovery (v5 I think) on my phone.
I wanted to install Cyanogenmod v 10.1.3-RC2.
I followed this guide: http://wiki.cyanogenmod.org/w/Install_CM_for_i9100
However I couldn't get Heimdall to work, so I got Odin v3.07.
I used this guide with the supplied PIT file (this may have done me in).
In the attachments you can see the Odin output.
I waited a good 4-5 minutes, but my mobile wasn't restarting or anything, so I disconnected it, but couldn't get it to boot.
And as I've said before, now I only see a black screen, regardless of the buttons I push. I've tried removing and then replacing the battery, but still doesn't work.
I've read that the USB-JIG is the last resort, but that you need to at least have the screen turn on and display a logo for it to work. Is this true, or can I still in my phone's state of brokeness use it?
And if I can use a jig, this one would be a good one to get, right?
Thanks for any help!
Jig has a 0.000000000000000000000001% chance of working, but try it anyway. If you can afford to be without your phone for as long as the jig takes to arrive, try it, but if you want it fixed sooner than later - service centre. You don't flash PIT's. Ever. This is most likely the cause of your busted phone.
Yeah. PIT is the cause of most phone bricks. I don't want to lead somebody to misinformation, but I heard that you use PIT file only for 3-file stock software when you want to start again with clear fully wiped phone. This is the only situation I heard when PIT file is used.
About your problem. You can buy USB JIG. Like the user above has mentioned you have really low chances to get it working. Your last resort in this case is to try and leave the phone on warranty in samsung repair service. Many people suggest that you should say that your phone turned off during update with Samsung KIES software and has never turned on again even though it has been written on your computer screen that installation has completed succesfully. This might help and they will replace motherboard for free. If not buy new phone. Anyway be patient and wait for more answers.
Dammit. Well thanks for the replies and tips. I hope there is someone who has another tip.
The reason I went with the PIT file as well is because I did it the first time around, flashing the first recovery. So I thought it wouldn't harm this time.
No miracle fixes. If the phone won't even bootloop, you've got zero chance of fixing it yourself. It's unlikely to even be JTAG'able. A Samsung service centre certainly wouldn't attempt one given a motherboard replacement is quicker/easier for them to do (not to mention they make a nice profit margin on the labour/parts). Having mentioned motherboards, you could also source a 2nd hand one from a 'donor' phone with a broken screen & either replace it yourself or pay a local mobile repair shop to do it (will be cheaper than paying a service centre to put a new one in).
Also, if you're lucky, service centre may not notice or care that you've been messing with it/you broke it & might fix it under warranty. Tho anyone here who tells you that's a certainty is lying to you. It's a crap shoot, you might get it, you might not. Obviously if you have no warranty that's irrelevant.
Damn. I was afraid of this. I've contacted Samsung support, but I'm pretty sure they won't do anything since I'm 3 months out of guarantee.
And now I'm looking for replacements as well.
Always seems to be the way unfortunately (this kind of thing happening just after warranty expires). If you've had the phone a while (e.g since it was released), yeah, maybe a new phone might not be a bad idea. But still, get the jig, try it, see what happens. Nothing to lose except a couple of bucks for the jig.
Thanks. Will do, since it's only 4€. And it might come in handy if I replace my phone with an S3, S4 or Note 2.
I feel your pain. I did the exact same thing earlier this year. I didn't think I was still covered by the warranty but when I took it in to the service center they fixed it for free even replacing the main board (I think). Your as well to take it in on the off chance their record still show it as under warranty.
Thanks for the support. Unfortunately the service centre is not close to me, so I'm awaiting a reply from Samsung support and hope they allow me to send it to them.
At least I was just smart enough to make a backup of the files before. So nothing lost on that end, I can get all my contacts, messages, etc. back.
I unplugged the phone while flashing kernel and now the phone is fully bricked. wont turn on, can't access recovery mode or download mode.only thing it does is gets a bit hot when the battery is in or when charger is plugged in. I've read something about a USB Jig. and some people say it works (can fix a hard bricked phone) and some people say it doesn't, so does it work or not ? can anyone confirm this ?if it doesnt, what should I do to fix it ?
Nope. I can almost guarantee a jig will not work (but if you can get hold of one, try it anyway. You might end up being the person with the 'golden ticket').
Besides, it won't 'fix a phone' even if it 'works' (you thinking it will is probably indicative of why/how the phone became bricked in the first place). All it will do is put the phone in download mode which theoretically allows you to flash a stock rom which fixes the phone.
Which as I said is a moot point in this case because it won't work.
It might be JTAG'able, though this is probably a longshot as well. Most likely scenario is a motherboard replacement; either a new one by a Samsung service centre (most expensive option), or a second hand one sourced from a 'donor'/broken phone which you either swap yourself or pay a local mobile repair shop to swap (cheaper option).
NEVER UNPLUG PHONE WHILE FLASHING ! You will instantly end up with a hard brick.
strange mine was flashing to stock when it suddenly got unplugged (loose usb port) but it was okay until i rebooted, he must've flashed it with a wrong firmware
my suggestions is have it JTAGged, however I recommend what MistahBungle said too I had the same experience not too long ago, I flashed it with an incompatible firmware and it went dead, I ordered the usb jig 4 days ago but it still too far to go and I needed the phone for work, I went to the repair shop nearby (not samsung) and they said they can fix it for $20 (rush) $14 if not (but could take days before you can get it) so you can choose anyways just hope that you don't have a corrupt NAND or a motherboard replacement. Heads up and hope for the best
thewrwhbio
dark_blitz said:
strange mine was flashing to stock when it suddenly got unplugged (loose usb port) but it was okay until i rebooted, he must've flashed it with a wrong firmware
my suggestions is have it JTAGged, however I recommend what MistahBungle said too I had the same experience not too long ago, I flashed it with an incompatible firmware and it went dead, I ordered the usb jig 4 days ago but it still too far to go and I needed the phone for work, I went to the repair shop nearby (not samsung) and they said they can fix it for $20 (rush) $14 if not (but could take days before you can get it) so you can choose anyways just hope that you don't have a corrupt NAND or a motherboard replacement. Heads up and hope for the best
Click to expand...
Click to collapse
YES I flashed it with a wrong firmware. On"about phone" screen, it shows I9100G. so I thought the device was I9100G which is different from I9100, but when I looked at the back, I9100M !!! and I9100 and I9100M have the same hardware.......
MistahBungle said:
Nope. I can almost guarantee a jig will not work (but if you can get hold of one, try it anyway. You might end up being the person with the 'golden ticket').
Besides, it won't 'fix a phone' even if it 'works' (you thinking it will is probably indicative of why/how the phone became bricked in the first place). All it will do is put the phone in download mode which theoretically allows you to flash a stock rom which fixes the phone.
Which as I said is a moot point in this case because it won't work.
It might be JTAG'able, though this is probably a longshot as well. Most likely scenario is a motherboard replacement; either a new one by a Samsung service centre (most expensive option), or a second hand one sourced from a 'donor'/broken phone which you either swap yourself or pay a local mobile repair shop to swap (cheaper option).
Click to expand...
Click to collapse
I just contacted Samsung and they said the phone is not under warranty, so get it JTAGed is my only option. and what do you mean by "It MIGHT be JATable" ? might be ?? Are there still chances that it can't be JTAGed ??? XD
Yep. Not all phones like this can be JTAG'd. Sometimes the NAND is so messed up not even a low level operation like a JTAG is possible. In these cases a motherboard replacement is the only fix.