Related
Hi,
so kernel sources are released. Is there any fix for hero's wifi problems? I mean dropping connection to AP. It is so annoying, I tried to do everything: change channel, mode, encryption... Nothing helped. It is Linksys wrt160nl. The same applies to other networks (some public hot spots).
I never had this problem with my Linksys WRT54GL...
mopodo said:
I never had this problem with my Linksys WRT54GL...
Click to expand...
Click to collapse
Could you paste your wifi settings? (mode, encryption mode, channel)
Using the Modaco custom ROM 2.8 (never had problems with modaco ROM and generic)
Router: Linksys WRT54GL running Tomato 1.25 firmware
Wireless Mode: Access Point
B/G Mode: Mixed
Channel: 1 - 2.412 Ghz (try a free one)
Security: WPA / WPA2 Personal
Encryption: AES
Group Key Renewal: 3600 seconds
No Mac Filter
Under Advanced Settings I changed "Transmit Power" to 251mW for a better signal, the rest are default values.
Try to update your router firmware
Are you alone with this problem?
greetz
In case you haven't done so yet. Check out the Wifi Sleep Policy (access by pressing menu when you are in wifi menu). Normally the Wifi is turned off then the screen is turned off which can cause problem.
Similar problem with netgear wnr2000
mopodo said:
Using the Modaco custom ROM 2.8 (never had problems with modaco ROM and generic)
Router: Linksys WRT54GL running Tomato 1.25 firmware
Wireless Mode: Access Point
B/G Mode: Mixed
Channel: 1 - 2.412 Ghz (try a free one)
Security: WPA / WPA2 Personal
Encryption: AES
Group Key Renewal: 3600 seconds
No Mac Filter
Under Advanced Settings I changed "Transmit Power" to 251mW for a better signal, the rest are default values.
Try to update your router firmware
Are you alone with this problem?
greetz
Click to expand...
Click to collapse
Hi got similar problem with my router netgear wnr2000.what i found funny is that when i reset the router, the phone connects perfectly to the router, but after abt 24hrs or so, it fails to connect.even if i reboot my phone, or reset the connection on phone.fails to connect.it will only connect when i reboot the router. i will try the 'aes' encryption n see if that helps.will update if it works
Thanks for your replies. Please could other members share their experiences, used options and solutions. This issue is too common to simply forget it. I am trying to find some kind of pattern or special options, it requires.
i dont have a problem with wifi apart from the wont find or connect to n-range device other wise i use wifi all the time it never drops, on stock orange uk firmware
I have a Sitecom WL-173 router.
I cannot connect at all. I can, but only with no or WEP security. That is no option for me.
When I use WPA or WPA2 my Hero does view my network, but does not connect.
I called HTC about this problem. He told me that they do not support all routers. He could not tell me which they support and which not.
mopodo said:
B/G Mode: Mixed
Click to expand...
Click to collapse
I also have the same problem. The way to solve it is to change the above setting to 'G' only. Not mixed/Hybrid.
Cheers!
I have not had any problems trying to connect to WiFi networks, until i went over to my mates place where he has the Virgin 50MB B-Band and also a D-Link wifi-N router, and my Hero could no see the network at all, even though his iPhone connected straight away.
markoc84 said:
..., even though his iPhone connected straight away.
Click to expand...
Click to collapse
Augghhhhh... that hurts. Please, do not curse in this forum
tembares said:
Augghhhhh... that hurts. Please, do not curse in this forum
Click to expand...
Click to collapse
I'm sorry, it hurt even more when i was sitting there pissed off that my Hero wouldnt connect to the Wifi!!!
I have Virgin 50meg at home no problem at all, went to my GF's who has basic Virgin cable 10meg on netgear G and would not connect at all.
No idea why, as it should be all fine!
I have the same problem. It is so ****in annoying. My router is a Linksys WRT54G with Tomato firmware v1.25. Router is in "G only mode", WPA-2 PSK-AES security, I've set a static local IP for the phone, the phone's wireless is set to always ON... I basically tried everything I could think of. Ended up rooting the phone and installing Modaco 2.9... but didn't change anything. The only way I can get it work again when it drops is shut the Wi-Fi off then on...
Worst of all this is the problem seems widespread (but not universal)... What the **** does HTC think putting a ****in smartphone on the market with defective Wi-Fi... This is non-sense.
I really hope someone comes up with a fix or HTC updates this... otherwise we might want to start thinkin bout class action.
[email protected] said:
I also have the same problem. The way to solve it is to change the above setting to 'G' only. Not mixed/Hybrid.
Cheers!
Click to expand...
Click to collapse
Is it a router setup or a Hero setting?
Pleaes explain if it's one of the options
probs here too ...
Linksys WAP54G v3.1
vs
HTC Hero
was working perfectly for first month or so, but has been getting worse and worse. ie, for a few weeks it would see the wifi but would usually fail to connect. now I'm lucky if it can see it at all!
have reflashed the wap with dd-wrt and experimented with a lot of settings. no diff.
have reflashed the hero with hero21 comunitry v1.6. no diff. (and also latest radio)
it just starts and stops when it feels like it.
oh, and my eeepc works fine on the same wifi, so I know it's not some wap screw up.
tried every tip I can find like 'use mixed mode' or 'g only', etc etc.
I am starting to think it's a hardware fault?
Same problem
Siemens Gigaset Tiscali modem with wpa psk2 tkip and T-mobile hero rom.
Sees the modem and connects with security first time but then says 'remembered out of range' on wifi settings but interestingly in wifi buddy it constantly has the syncing symbol next to the network.
Really annoying.
I've tried WEP and security off, wireless g only etc etc.
I have problems too but seems different to yours... but who knows : in fact i can't connect to wifi when the SSID is masked. Even if - or course - i put manuualy the ssid before with the good wep key. It happens on a livebox ( orange box )... but if i press the button to show the wifi network - it has to be made when you connect a device for the first time on this box - then it connects to the network... else it tells me that the network is out of range...
So does the wifi on hero has problem with masked SSID ? To compare i never had this problem - on the same box - with the touch diamond and the touch hd... and at home, not masking the ssid, the connection is ok without doing anything.
Ciao
Fred
I had the same problem with a Zyxel 660 router. I was able to connect to the wifi (WPA/PSK enable) but there was no data transfer possible.
So I updated the Radio ROM to the 63.18.55.06JU_6.35.08.29 version and it solved the problem.
Hi all,
I'm having a hell of a time keeping my X10 connected to my home WiFi router (a Netgear DG834). If I reset the router, the phone connects and is happy for as long as you like.
turn off the wifi, or move out of range, and it will never connect again ... unless you reset the router.
*sigh*
Been trying lots of stuff and it seems okay to connect over an open connection, but that's not satisfactory.
On further investigation, I've discovered that the Router detects the phone, but doesn't issue an IP address and I believe this is because the Phone does not transmit an identifier name, just a MAC address.
SO ... HOW DO YOU SET THE WIFI IDENTIFIER NAME?
Thanks for any help offered.
regards,
S.
StampedChipmunk said:
Hi all,
I'm having a hell of a time keeping my X10 connected to my home WiFi router (a Netgear DG834). If I reset the router, the phone connects and is happy for as long as you like.
turn off the wifi, or move out of range, and it will never connect again ... unless you reset the router.
*sigh*
Been trying lots of stuff and it seems okay to connect over an open connection, but that's not satisfactory.
On further investigation, I've discovered that the Router detects the phone, but doesn't issue an IP address and I believe this is because the Phone does not transmit an identifier name, just a MAC address.
SO ... HOW DO YOU SET THE WIFI IDENTIFIER NAME?
Thanks for any help offered.
regards,
S.
Click to expand...
Click to collapse
DG834 the same router as i have, I have the V5 version, anyway I had exactly the same problem, will not connect to it once you turn off wifi or move out of range, just says scanning on the phone.
Anyway the Fix is to download the latest firmware for your router, make a backup first but i didn't need a backup, install the latest firmware and it should be ok, I know mine is
I've been having the same problem as you with the wifi, with the router not issuing an IP address, but didn't realise that was the problem.
Just tried resetting the router and it worked. However, when i got back to my laptop, i noticed that there had been an IP address conflict between the phone and the laptop.
Just something to throw in there...
Cheers both.
Router firmware is at the latest according to Netgear (I have the same model, just couldn't remember the version number)
I'll check the IP Address conflict, but with the router set as DHCP, along with all my assorted PCs all set to ask the router for an IP address this shouldn't happen, unless the Phone has a fixed IP address in it somewhere.
Hmm.
Weirdly I turned the wifi on this evening on the phone and it connected immediately and had no problems. Will have to keep watching and checking I reckon - there's not a consistent fault here...
Just plugged my headset into my X10 and bang its lost the Netgear 834, there is defo something wrong with X10's and the most popular router in the world lol
I am going to try and see if it loses my [email protected] fast 24 router provided by Sky Broadband, will let you know if it's Netgear specific.
Must be a Netgear thing, my sagem works flawlessly, I install 834s all day in work, we have approx 150 of them out there with customers, I cannot belive this phone is not fully tested with it Can someone try adding the MAC address to the list of permitted devices and see if it holds connection then?
In the Wireless Networks it says "Connected" next to my "SSID" i have the correct key and dns/static ip setup. I go on Marketplace, internet browser (Opera), and another internet browser (Skyfire) and none of them work, so basically I'm connected to my router but I have no Internet.
I have HSPL3, ChuckyROM, and Radio Radio_2_11_50_26, I used to have Radio 2_12_50_02_2 but the internet didn't work with that one either.
What could be wrong??
Sekito said:
In the Wireless Networks it says "Connected" next to my "SSID" i have the correct key and dns/static ip setup. I go on Marketplace, internet browser (Opera), and another internet browser (Skyfire) and none of them work, so basically I'm connected to my router but I have no Internet.
I have HSPL3, ChuckyROM, and Radio Radio_2_11_50_26, I used to have Radio 2_12_50_02_2 but the internet didn't work with that one either.
What could be wrong??
Click to expand...
Click to collapse
First off why are you using static?
Second have seen these types of issues before with static , try dynamic(DHCP).
well i have to use the dns, i don't need the static ip, i switched to dhcp and only input the dns but it is still not working.
Sekito said:
well i have to use the dns, i don't need the static ip, i switched to dhcp and only input the dns but it is still not working.
Click to expand...
Click to collapse
In your settings, when you configured your wifi , in the box that says "connects to:" did you select "The Internet" or "My Work", this should be Internet ...
yea its says "The Internet" and by the way, after i removed the static IP my connection just says Unavailable when i try to connect (I hide my router's SSID so i input the stuff manually)
Oh and i had a motorola cliq before and it connected just fine
ok so for some reason i retried it just now and the internet works...so i guess problem is solved
Hi, I searched the forums and found this thread regarding wifi Internet problem so I'm posting my problems here.
I'm having similar wifi issue. I can connect to home router just fine but when I'm out using either free wifi from some stores (like panera or starbucks) or School wifi, it shows up as "Connected" but when I try browser it won't even show the home page or log in page. I switched from "Work" to "Internet" but it still won't work...
I don't think it's hardware problem but more so OS problem or something i'm missing. This problem only occurs with WinMo 6.5(I use stock rom), and when I boot Dan Android, wifi works fine. I'm not sure if Android's usage of wifi is somehow affecting my WinMo's ability to log into wifi but this is my wild guess.
If someone knows what my problem is could you please help me?
thanks
i think my problem was that when i tried to connect to my wifi, my hd2 was connected to my pc via usb. when i tried to connect when i'm not connected to my pc it worked
that's about all i know, hope it helps
did recognize this too...i think w-lan is disabled when active sync is activated...because the phone can use the internet connection of the pc.
back to topic: do you use static ip's in your home network or does the other networks (school) require a static but you're on dynamic ip?
DN41
hm, I have no idea which ip I use when I'm connected to home or public. How do I check?
So it seems that there is no way to connect to a non broadcasting wifi network in any of the current froyo roms. Anyone got any ideas on how to resolve this?
I have tried hidden wifi enabler and even added it separately, but it just says out of range when its sitting right next to the wireless router. With broadcasting on it connects with no problems.
tnerb123 said:
So it seems that there is no way to connect to a non broadcasting wifi network in any of the current froyo roms. Anyone got any ideas on how to resolve this?
I have tried hidden wifi enabler and even added it separately, but it just says out of range when its sitting right next to the wireless router. With broadcasting on it connects with no problems.
Click to expand...
Click to collapse
I've done it in Vegan... what encryption are you using? I know there are issues with WEP...
using wpa2 I heard rumors that tkip doesnt work with it. This correct?
I got mine to connect running stock and TNT 4.4 but it wasn't easy. I intially went into wifi setting and "add a network" typed in the SSID (not being broadcast) and password (WPA2/TKIP) and it would find the network but not connect. I did some searches and found various suggestion but none worked.
After a lot of failed attempts I got frustrated and turned off wifi on the tablet and then turned it back and suddenly it connected with no problems. It may have been a one off thing but couldn't hurt to try it.
nik
Ill give this a try and see what happens. But I am not getting my hopes up.
Just out of curiosity.....
What's the point of connecting to non-broadcasting router?
It's like turning on WiFi in the middle of desert?
JMO.....
turn on ssid bdcst. connect then turn bdcst off.
Tester30 said:
Just out of curiosity.....
What's the point of connecting to non-broadcasting router?
It's like turning on WiFi in the middle of desert?
JMO.....
Click to expand...
Click to collapse
If your wireless router doesn't broadcast it's SSID, others can not attempt to access it.
My Stock 3588 connects fine
I have a non broadcasting router in my home and stock 3588 on my gtab. Did the connection once when I bought the tab and it has been connecting just fine for couple months now!
LGCubana said:
If your wireless router doesn't broadcast it's SSID, others can not attempt to access it.
Click to expand...
Click to collapse
So not even close to true
Using a non-broadcast SSID as a security measure is probably the weakest (well...next to no encryption at all) method available.
LGCubana said:
If your wireless router doesn't broadcast it's SSID, others can not attempt to access it.
Click to expand...
Click to collapse
Using a Linux PC, I can see ALL available wireless APs with this command:
Code:
iwlist wlan0 scan
Hiding the SSID is not even considered to be a security option, it is that poor. Save yourself some trouble and let it broadcast the SSID.
hi,
I've linksys wi-fi router model WRT54GH in my home & it has a good amount of signal strength to cover entire area.
My recently bought galaxy S2 is able to identify linksys wi-fi access point & connects too with the IP assigned to it, also at wi-fi settings connected being displayed.
Now when I try to access Internet (any url google/FB), it doesn't connect at all.
I tried almost everything about router configuration, restart etc. but with no success
can someone plz help on this ?
shantanu_d said:
hi,
I've linksys wi-fi router model WRT54GH in my home & it has a good amount of signal strength to cover entire area.
My recently bought galaxy S2 is able to identify linksys wi-fi access point & connects too with the IP assigned to it, also at wi-fi settings connected being displayed.
Now when I try to access Internet (any url google/FB), it doesn't connect at all.
I tried almost everything about router configuration, restart etc. but with no success
can someone plz help on this ?
Click to expand...
Click to collapse
In my case the problem was with frozen "WiFi sharing" in combination with juicy defenders "Location" fearure. It seems such combination is dangerous. Solutin (in my case):
1. defroze
2. remove all wifi networks
3. reboot (for "clean" frozing)
4. make WiFi sharing frozen
5. reboot again just for fun
Try to check your router's MAC address restrictions. In my router, as security, I have to add MAC addresses of each device to share internet. They take IP's, connects etc. but does not have accesses to internet
as above, check that there is no MAC filtering set up.
one other thing it may be is the security settings, if you have a WEP Key to access the router it may need the Hex conversion of your key depending on what level of security you have (64bit or 128bit for example)
shantanu_d said:
hi,
I've linksys wi-fi router model WRT54GH in my home & it has a good amount of signal strength to cover entire area.
My recently bought galaxy S2 is able to identify linksys wi-fi access point & connects too with the IP assigned to it, also at wi-fi settings connected being displayed.
Now when I try to access Internet (any url google/FB), it doesn't connect at all.
I tried almost everything about router configuration, restart etc. but with no success
can someone plz help on this ?
Click to expand...
Click to collapse
Try setting up a static IP address for your phone, I presume your network is a 192.168.1.0, go into router settings and LAN setup, give your phone the address in a static DHCP assignment of 192.168.1.5, or any other address in the same subnet your in. Some SGSII's have problems with dynamic DHCP for some reason, some NS had the same problem too,
Sent from my Sammy Galactic S2 Beastly Device
I have a similar problem and I fix mine temporarily by turning my wifi off, then in wifi settings > advanced, I change wifi sleep policy from 'never' to 'only when the screen is off'. However I have to do this every time I want to use wifi so it can become quite annoying sometimes.
So I can get through however only for a short period of time as it seems as long my Galaxy S2 keeps turning off my wifi even though it's on :/
I had exactly the same issue on Linksys E4200 with my laptop, could connect to network, even to router's attached storage, but not to internet. Restart helped
On SGS2, I couldn't connect to the router at all at first, but fixed this by switching from WPA2/WPA mixed mode access protocol to WPA2 private. But I guess this is not exactly your issue.
SiSL said:
Try to check your router's MAC address restrictions. In my router, as security, I have to add MAC addresses of each device to share internet. They take IP's, connects etc. but does not have accesses to internet
Click to expand...
Click to collapse
Thanks for the suggestion but MAC restriction is already disabled at router
Robsso said:
I had exactly the same issue on Linksys E4200 with my laptop, could connect to network, even to router's attached storage, but not to internet. Restart helped
On SGS2, I couldn't connect to the router at all at first, but fixed this by switching from WPA2/WPA mixed mode access protocol to WPA2 private. But I guess this is not exactly your issue.
Click to expand...
Click to collapse
Yes, you are right this is not an issue for me.
In fact my SG2 being assigned with an IP address from 192.168.1.xx subnet.
Also at a same time my laptop connected with an IP from same subnet able to ping SG2.
OccasionalDroid said:
Try setting up a static IP address for your phone, I presume your network is a 192.168.1.0, go into router settings and LAN setup, give your phone the address in a static DHCP assignment of 192.168.1.5, or any other address in the same subnet your in. Some SGSII's have problems with dynamic DHCP for some reason, some NS had the same problem too,
Sent from my Sammy Galactic S2 Beastly Device
Click to expand...
Click to collapse
My SG2 being assigned with an IP address from 192.168.1.xx subnet.
So I think IP addressing may not be an issue.
Also another thing I tried was, at a same time my laptop connected with an IP from same subnet able to ping SG2.
So wi-fi router may not be an issue here, whats say ???
Even I am facing the same issue at my office network. I am able to connect to the wireless network but if I try to access any app I cannot browse. This is really frustrating looks like some issue with the modem drivers.
I was able to browse on another wifi created virtually by mobile tethering. This looks like a major bug with the current firmware. Another interesting thing to note is that the Wifi network has a hidden SSID and uses WPA2 auth scheme.
I have seen a Galaxy S able to connect to the same n/w without any issues.
Has anyone figured out a solution to this one ?
Hi, thanks for your reply.
I am yet to figure out a solution for this
Even I am also agree on the probable issue with modem driver.
I've D-link modem.
Are you aware of anything about this modem that can be reconfigured to get this worked ... ?? pl let me know
The wifi router at my office is Cisco Aironet 1200 Series, anyone else facing this issue ?
I'm having the same problem at work connecting my SGS2 with v2.3.3 Official Firmware (customized for Orange service provider) to a Cisco Aironet 1130 AP. I can see that the Galaxy authenticates with the AP correctly and gets IP from the DHCP server, but it cannot send or receive any traffic, although the phone stays connected and authenticated. At home, I use an Atheros based Fonera with DD-WRT without any problem.
As I'm the company's network administrator, I will try to further investigate this problem, but it seems like some kind of incompatibility between the devices or misconfiguration ....
Basuk said:
The wifi router at my office is Cisco Aironet 1200 Series, anyone else facing this issue ?
Click to expand...
Click to collapse
try turn off the wifi, turn off the mobile data and turn on the wifi again
It seems the SGS2 sometimes has problems with DNS.
Try a static IP and use 8.8.8.8 as second DNS server, which is a free Google DNS server.
This fixed MY problems
I rooted my SGS2 and voila wifi worked at my office finally I have been able to find a solution.. love my SGS2 the Beast...
I'm having this same problem..
I think I've tried all the solutions above, but one (Sorry - noob question):
Rooted?
is there a firmware patch or something that I should know about?
Anyone got any other ideas?
ETA:
I can connect to hotspots (DHCP) and at home (Have to set it to static tho)
No internet
AP works - Laptop and i8910 (had to set static and advanced settigs etc). I've rebooted it a few times, set DHCP on and off. DHCP seems to be running on the router
viqles said:
I'm having this same problem..
I think I've tried all the solutions above, but one (Sorry - noob question):
Rooted?
is there a firmware patch or something that I should know about?
Anyone got any other ideas?
Click to expand...
Click to collapse
This is an issue with SGS2 with wifi server using authentication protocol TPIK, if you use AES as encryption then it will work without any issues.
That should be a setting in my AP? I can't see it...
If I get a new non-crappy AP is that likely to solve my problem?
ETA:
Ah - that's a WPA thing? Mine only seems to do WEP - is that right?