INIT.D FOLDER SUPPORT FOR GRAND QUATTRO GT-I8552
OK GUYS here i present you the method to install init.d folder support without a custom kernel so that we can use any scripts or app2sd etc...
IT WORKED AND TESTED IN MY DEVICE :highfive: :highfive: :highfive: :highfive:
Requirements:
#1 You must be rooted
#2 You must have busybox intalled
#3 ADB driver installed in your pc
Procedure to install:
- Download 'Busy Box" and install from playstore {select /system/xbin/
- Download attached 'DOC_INIT.D.zip' file and extract it to your pc {in to C:/} {dont extract in any folder}
- Now run 'runme.bat' file
- Grant permission in phone to ADB Shell then rest it will do by default {Dont Do Anything Else}
- your phone will show the process on screen :fingers-crossed::fingers-crossed::fingers-crossed:
After installation complete terminal shows 'All Done' press any key to continue
Check for init.d folder in Root/etc/init.d
How to confirm its working?
Reboot after install
Check u will see root/data/local/temp/init.d_log_text.txt
Open the file in text viewer it will show 'done'
Now you successsfully installed init.d folder
Now its time to test all the scripts available in XDA...
Finally you guys also check the scripts....download Script manager app - put the script file in that init.d folder - select the script through smanager
:victory::victory::victory:
Screen shots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Scripts for quattro
| SCRIPT | Supremacy Trilogy
Trilogy Features::
-Cleaned up
-MUCH better Ram usage
-Cache Cleared at every boot
-SD speed tweak
-Logger removed
-Better browser performance
-Sysctl tweaks
-Added modified Zram script
-Better battery life
-Lag? GONE
-Faster GUI
-Loopy smoothness tweak
-Apps zipaligned at every boot
-Faster Networking
-Smoother LWP animation
-Adrenaline boost
-Kernel Tweaks
-Better gaming
HOW TO:
Install:
1. Boot into CWM
2. Wipe dalvik cache
3. Flash zip
4. Reboot
Uninstall:
Didn't work out for you? lag? Freezing?
Flash the uninstaller in the attachments.
Thanks:
EMWNO for this script
Adrenaline™ Boost
Description
This script act like an nitro boost for your Android.
It helps you to clear your system cache, get more free ram for you and gravely boost your phone's performance !
*Best use before gaming !
How it works?
Your phone's ram usage will get higher and higher everyday then you will find your ace become an @SS because it's turtle speed and only reboot fix this problem.
Our android os create system cache everyday, but after one day or so, those old caches are not longer in use but the os continuously create newer cache that's why the ram get heavier and heavier everyday !
Adrenaline Boost help you to clear those caches ! So you won't have to reboot again !
For those who have sharp eyes may find your battery life decreased. WHY?
Adrenaline Boost clear your system cache and your cpu will work harder to build back needed cache.
Some have reported to me that the Opera browser crash after boost when open over 3 tabs.
You system need caches to work , this boost is intended to clear old cache that are no longer using and let the system to build new cache, so if u boost it too often , your cpu will be very busy building needed caches and may consume more battery than normal !
Boost it only when it's needed then there will be no problem !
How To Install ?
1) Download from the attachment below
2) Put into your sdcard
3) Reboot into CWM
4) Mounts /system
5) Flash it
6) Reboot
How to Use It?
1) Open terminal emulator
2) Type :su [hit enter]
:boost [hit enter]
How to uninstall adrenaline boost
just flash uninstaller
Thanks:
IMBAWIND for adrenaline boost script
Note:
Dont use bothe scripts simultaneously please uninstalling the script before u try another one
RESERVED
Guys discuss all the problems individually in their respective threads...please make all the threads alive
Sent from my GT-I8552 using XDA Premium 4 mobile app
I just restored my system via cwm advanced option do I need to do init.d again?
Sent from my GT-I8552 using xda app-developers app
tonyjs007 said:
I just restored my system via cwm advanced option do I need to do init.d again?
Sent from my GT-I8552 using xda app-developers app
Click to expand...
Click to collapse
Check root/system/etc/init.d if it's not there u have to do it again
Sent from my GT-I8552 using Tapatalk 2
Its not there bro am dng it again
Sent from my GT-I8552 using xda app-developers app
tonyjs007 said:
Its not there bro am dng it again
Sent from my GT-I8552 using xda app-developers app
Click to expand...
Click to collapse
Good
Sent from my GT-I8552 using Tapatalk 2
I can't seem to install INIT.D, please see screenshot and advice. Thanks.
agentdeep said:
I can't seem to install INIT.D, please see screenshot and advice. Thanks.
Click to expand...
Click to collapse
Did u install super su after flashing the Rom?
If so did u gave permission to add shell in phone while process?
Did u install busybox?
Please see the instructions properly before u try it.
Sent from my GT-I8552 using Tapatalk 2
drganbds said:
Did u install super su after flashing the Rom?
If so did u gave permission to add shell in phone while process?
Did u install busybox?
Please see the instructions properly before u try it.
Sent from my GT-I8552 using Tapatalk 2
Click to expand...
Click to collapse
I use docdroid clean rom and did not install super su after cwm reboot, do I still need to install even its already rooted?
yes, busybox is installed
agentdeep said:
I use docdroid clean rom and did not install super su after cwm reboot, do I still need to install even its already rooted?
yes, busybox is installed
Click to expand...
Click to collapse
Cwm will install only su binary files and u need to install super su app from playstore and open then it will ask to update binary files then select normal..that's it.
Now try init.d support install and grant permission to add shell via super su..
It should go normal
Sent from my GT-I8552 using Tapatalk 2
drganbds said:
Cwm will install only su binary files and u need to install super su app from playstore and open then it will ask to update binary files then select normal..that's it.
Now try init.d support install and grant permission to add shell via super su..
It should go normal
Sent from my GT-I8552 using Tapatalk 2
Click to expand...
Click to collapse
Ok. I will try again after installing Super SU and will give feedback after. Thanks.
EDIT: Still the same, I granted supersu access of adb, but still problem.. see log and please help.
Do you find init.d folder in system/etc then it's installed and continue using scripts
Sent from my GT-I8552 using Tapatalk 2
hi Doc, i tried the Ext2Int but it didn't work on my phone. Now, when i enter into cwm, it says it can't find the sdcard so i can't install any zip update
oldsap said:
hi Doc, i tried the Ext2Int but it didn't work on my phone. Now, when i enter into cwm, it says it can't find the sdcard so i can't install any zip update
Click to expand...
Click to collapse
Reinstall the cwm or reset the device.
Sent from my GT-I8552 using xda app-developers app
drganbds said:
Reinstall the cwm or reset the device.
Sent from my GT-I8552 using xda app-developers app
Click to expand...
Click to collapse
thanks doc, that worked!
Hi Doc, i followed all the steps below. i'm using a class10 32gb micro sd. im on JB 4.1.2. but it's not working. after i click on External>Internal and after the popup message, when i check on my storage, both the internal and the sdcard memory will show 5.06GB. After rebooting my phone, the internal memory is 5.06GB while the sdcard is 29.71GB
External to Internal Memory Swap method
please follow the steps carefully
- Download and install the app that i attached here
- open the app and grant permission
- pop up message will appear press'I dont care'
- go to settings:
1.check 'send rescan'
2. check 'Use per default'
- press original mounting point and change as 'sdcard0'
- press Ext.sdcard device Access and change the value from 179:49 to 179:33 its our device access value
- press back button and come to main screen
- check 'At Boot' box
- Now press External>Internal*
- wait till u get a small fraction popup message like 'Android sdcard permission granted' something like this
- Now go to storage option in settings there u will see your ext sdcard is swaped as internal sdcard
- Reboot device to work properly
Guys it works only on JB 4.1.2 and if you dont like to swap just uninstall app and reboot
Use Class 6 or Class 10 Sdcards...I prefer Class 10
Dont worry all your apps data will be swaped to ext sdcard so apps will work normally
I swaped my 8gb sdcard as internal memory:
If u use 16gb - internal will be 16gb
If u use 32gb - internal will be 32gb
Click to expand...
Click to collapse
oldsap said:
Hi Doc, i followed all the steps below. i'm using a class10 32gb micro sd. im on JB 4.1.2. but it's not working. after i click on External>Internal and after the popup message, when i check on my storage, both the internal and the sdcard memory will show 5.06GB. After rebooting my phone, the internal memory is 5.06GB while the sdcard is 29.71GB
Click to expand...
Click to collapse
Check your internal and ext sd cards name in your device and should specify as same name in app and check the ext.Sdcard device access number for sure...
Internal - sdcard0 or Sdcard
External - extsdcard or Ext Sdcard.
Sent from my GT-I8552 using Tapatalk now Free
drganbds said:
Check your internal and ext sd cards name in your device and should specify as same name in app and check the ext.Sdcard device access number for sure...
Internal - sdcard0 or Sdcard
External - extsdcard or Ext Sdcard.
Sent from my GT-I8552 using Tapatalk now Free
Click to expand...
Click to collapse
using X-polre:
internal - /sdcard (sdcard)
external - /storage/extSdCard (sdcard)
btw, when i try to change the vlod value using ext2int, a popup message says that the sdcard is vfat
Related
FlintFire_v1.0
Based on latest official stock firmware Android 2.2.2
FEATURES:
1)TJ Styles OC'd Kernel
2).Darktremor Apps2SD 2.7.5.3 beta 4(requires that you have ext2 or ext3 partition on your SD card; exact procedure to create one is described in installation procedure.)
3) Fully deodexed and zipalligned apps and framework.
4) Rooted.
5) Installed BusyBox with support for init.d scripts
6) Replaced stock boot animation with custom animation
8)Support for OpenVPN(not tested) and CIFS.
9)Removed some stock apps and updated Gapps.
8)Updated Documents to go and Maps to 5.9 with worldwide navigation.
9)Added a init.d script and tweaks to build.prop(Increased screen density and possible increase in net speed)
10)Repalced stock Launcher and File Manager.
11)Added the V6 SuperCharger Script(Just go to terminal and type: superc)
Firmware should also work with compatible devices such as: Cherry Mobile Superion, Commtiva Linx N700, Olivepad VT-100, Spice MI700, and Camangi FM600 but I don't have these devices, so I cannot verify. As always make a backup before installing any custom firmwares.
Requrements:
Clockworkmod Recovery from here
Installation:
1)Create a backup using Clockworkmod Recovery.
2)If you dont have a A2SD EXT2 partition follow the first part of the instructions from here
3)Download the ROM and store it in the root of your SD Card.
4)Reboot into recovery mode,wipe data and cache and install the ROM.
Migrate from stock or another build:
1)Make backup of your phone using Titanium Backup (select all user applications).
2)Copy all files and folders from SD card to local folder on your computer.
3)Install Clockwork Recovery Partition, create partition on SD card and install ROM as described in installation guide.
4)Copy all files and folders from local folder on your computer back to SD card.
5)Restore applications using Titanium Backup and reboot your phone.
Download:
Code:
http://dl.dropbox.com/u/21654931/FlintFire_v1.0.zip
Credits:
TJStyle for his OC'd kernel and kernel source.
hucqim80 for his recovery
dsixda for his kitchen
Darktremor for his excellent Apps2d
zeppelinrox for his V6_Supercharger
Brut.all for his hacked version of Google Maps
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Changelog:
v1.0
Initial Release
one question
hi
is ext4 ok as i have ext4 on my SD and is see u have mentioned that we need ext3
haree said:
hi
is ext4 ok as i have ext4 on my SD and is see u have mentioned that we need ext3
Click to expand...
Click to collapse
ext4 should work but you wont be able to backup your SD-EXT using clockworkmod recovery.
First backup your apps using titatinum backup,boot into recovery mode=>mounts and storage=>format sd-ext.This will format your partition to ext2.
then restart and restore your apps.
googlehome said:
ext4 should work but you wont be able to backup your SD-EXT using clockworkmod recovery.
First backup your apps using titatinum backup,boot into recovery mode=>mounts and storage=>format sd-ext.This will format your partition to ext2.
then restart and restore your apps.
Click to expand...
Click to collapse
hi
do i need to bakup my SD card to my PC before i do this as give below
First backup your apps using titatinum backup,boot into recovery mode=>mounts and storage=>format sd-ext.This will format your partition to ext2.
i just have a Ext4 done via CWM and as of now app2sd works im using amalgamations rom right now
what u have mentioned is a little new to me
haree said:
hi
i just have a Ext4 done via CWM and as of now app2sd works im using amalgamations rom right now
what u have mentioned is a little new to me
Click to expand...
Click to collapse
If you made your partition using CWM then it is ext2 and not ext4 .
Please check your partition type by connecting your device to your PC and opening a partition manager which recognizes ext partitions.you will see that your SD Card is split into 2 partitions
FAT32 and EXT2.(You dont need to check if you trust my word )
You can safely use my ROM because your are using EXT2 and not EXT4.
whaaat... 1512 in quadrant... impressive
googlehome said:
If you made your partition using CWM then it is ext2 and not ext4 .
Please check your partition type by connecting your device to your PC and opening a partition manager which recognizes ext partitions.you will see that your SD Card is split into 2 partitions
FAT32 and EXT2.(You dont need to check if you trust my word )
You can safely use my ROM because your are using EXT2 and not EXT4.
Click to expand...
Click to collapse
hi
1.i trust ur words 100% man
2.im lazy to do all that checking i do have ur rom downloaded ill use it and keep u posted
thanks buddy for ur kind reply
Edit : i tried ur rom and it was good.but as i need the original keyboard and could not get it to work on ur ROM i went back to
amalgamation 1.3 ROM thanks
Which languages are included?
Sent from my ViewPad7 using XDA App
GHome, tell me how to get 1500 in quadrant score
wazzzuuuup2 said:
GHome, tell me how to get 1500 in quadrant score
Click to expand...
Click to collapse
Convert your partion to EXT3.:
open terminal emulator and type:
>su
>a2sd convert-ext3
Use the data2sd feature:
>su
>a2sd datasd
No German language, only English, Vietnamese, ...?
Vcrone said:
No German language, only English, Vietnamese, ...?
Click to expand...
Click to collapse
dont ill include more languages in my next update
googlehome said:
Convert your partion to EXT3.:
open terminal emulator and type:
>su
>a2sd convert-ext3
Click to expand...
Click to collapse
After I did that my tablet rebooted and was unable to boot. Guess it's stupid to try to convert the ext2 partition when it is in use? Well how do I do it then?
googlehome said:
Convert your partion to EXT3.:
open terminal emulator and type:
>su
>a2sd convert-ext3
Use the data2sd feature:
>su
>a2sd datasd
Click to expand...
Click to collapse
it doesnt work... my quadrant score still stuck <1000 and even worst....
High quadrant score in the screen-shots is based on high CPU and high IO score so I would guess these tweaks would be highly dependent on sd card speed to get higher scores unless there is some swapping to ram going on to "fake" these IO speeds. I've read something about that while checking out data2sd > http://forum.xda-developers.com/showthread.php?t=852219
@googlehome: What brand and type of sd card are you using ? I'm very curious because I'm looking for the best one possible for our device.
Amalgation said:
High quadrant score in the screen-shots is based on high CPU and high IO score so I would guess these tweaks would be highly dependent on sd card speed to get higher scores unless there is some swapping to ram going on to "fake" these IO speeds. I've read something about that while checking out data2sd > http://forum.xda-developers.com/showthread.php?t=852219
@googlehome: What brand and type of sd card are you using ? I'm very curious because I'm looking for the best one possible for our device.
Click to expand...
Click to collapse
Im using a class 2 (not the best)16gb SD Card.You can create an ext3 partition with gparted from your PC.Im using ext3 currently
Thank you every much googlehome. Thank you. Thank you.
But i'm still can't play youtube HQ.
sorry for my weak english...
By the way, Wi-Fi is not working on my device with this ROM, just like it's not working with Amalgation's EUViewPad. It is, however, working with CleanViewPad ROM. I have HWVer 103.
Some of my impressions.
Wifi works on my Viewpad 7 HWV 1.03. Tle launcher is notably slower than the stock one. There is no email application and I don't know how to send and receive emails. It is not good as emails are very basic tablet function for me.
I am really courious how to "revive" icons from Dock "thrown" in the recycle bin?
Everything else is OK. One of my Quadrant scores was 1045.
[ROM] Stock 1.4.0 & 1.4.2 + Root + Mods - GO Launcher [Yes/No B&N|Rebloat Pack]
Alright today i bring to you a faster way to have a fully functional stock ROM with all the addons and eye candy look I have added a FULL version containing all B&N stock apps minus Keyboard and Mymedia (because those aren't good) so you can pick the one that best suits you.
PLEASE FOLLOW INSTRUCTIONS TO THE LETTER
What does this ROM provide?
* Root - Thanks Indirect
* Busybox already installed
* Ribbon Status Bar MDPI Mod
* Build.prop changed to look like a Nexus S Mod
* Working cifs, nls_utf8, slow-work, and tun modules - Thanks succulent
* Adhoc wifi FIX - Thanks zambien
* OpenVPN binaries
* Removed some B&N apps including Stock Home Launcher just kept Library, Reader, Games, Pandora and Netflix
* Changed Stock Hulu+ app with a modified one meant to work in most Android devices - Thanks blunttedsmurf
* Comfortaa Fonts
What applications include?
* Some apps have a Ribbon Notification Icon in order to match the Statusbar mod.
1. Superuser
2. ES File Explorer
3. NT Hidden Settings - thanks brianf21
4. Go Launcher
5. AdFree
6. Gapps including Gmail, Youtube and Google Voice (apart)
7. Button Savior
8. Modified Hulu+
9. Modified Email with working Exchange
10. Titanium Backup
11. IMO chat
12. Go Locker
13. Plume (Twitter)
14. TaskXP
15. MusicMod
16. Quick Boot
17. Gallery 3D
18. Wifi ADB
19. Antivirus Free
20. Phantom Music Control
21. SD-Booster
22. FlashPlayer
23. SpareParts
24. Root App Remover
25. Mclock
Installation:
1. Download the file: NT_stock_1.4.0_Ribbon_Root_v2.zip
2. Plug your Nook Tablet to your PC and check that Internal SDcard (MyNOOK) AND SDcard are mounted
3. Copy NT_stock_1.4.0_Ribbon_Root_v2.zip in the root (/) of Internal OR External SDcard (Pick one)
4. Eject safely your Nook Tablet
5. Boot into CWM
5.1 Wipe data then go to advanced>> wipe dalvik cache, once done press power button to go back
5.2 Go to Install zip from sdcard >> choose zip from sdcard (if you copied the folder to your External sdcard) >> select NT_stock_1.4.0_Ribbon_Root_v2.zip
5.2 Go to Install zip from sdcard >> choose zip from internal sdcard (if you copied the folder to your Internal sdcard [MyNOOK]) >> select NT_stock_1.4.0_Ribbon_Root_v2.zip
7. The process will start, once done Reboot your device ENJOY!
Recommendation:
* Backup your apps and data using Titanium for easy restore back
* Wipe data, dalvik cache before flash a new ROM - WARNING: it is safe to wipe/format data, cache, dalvik cache and system, DO NOT format the other partitions or you will brick your device
* Bypass registration of Nook Tablet by Albert Wertz
Download Links:
*These are flashable .zip
NT_stock_1.4.2_Ribbon_Root_B&N.zip - ROM with B&N content (318 MB) | md5: 0eb7a1dff67c5fe58be4c58b13f9abb2
NT_stock_1.4.0_Ribbon_Root_B&N_v2 .zip - ROM with B&N content (300.8 MB) | md5: 1c7033fb9c6467c98c5a50cc167fee5e
NT_stock_1.4.0_Ribbon_Root_v2 .zip - ROM with NO B&N content (284.6 MB) | md5: 9b909ce9d30feedbbde53ae367c861d5
Screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My Setup:
mClock widget with markedclOck theme (must create mClock folder: /mnt/sdcard/mClock/ and then drop the unzipped files)
PinsMusicMod widget (4x3)
Phantom Music Control (There is a bug and the options doesn't show up but here is my setup)
And lastly for the statusbar: [ICONS] Beautiful -= Ribbon Status Bar Icons =- [MDPI/HDPI]
~ Veronica
Thanks for this, Veronica. I'll give it a try shortly
_______sig starts here______
Even you were a beginner once
If this post helped click the thanks button!
remember QTIP - Quit Taking It Personal
Works just like it should.
"hack" by Barnes and Noble is a nice touch.
Real nice. I like the ribbons
Sent from my HTC Glacier using xda premium
Cool, gonna try it today! Could you add Morelocale also?
KOCTA said:
Cool, gonna try it today! Could you add Morelocale also?
Click to expand...
Click to collapse
Hmm will think about it, next version will have the copy paste mod. Keep dropping suggestions people.
~ Veronica
Sent from XDA premium using my Nook Tablet
Sounds good. Can I apply this if I have the perm root 9.9.9? Also, what is meant by flashable/not flashable? Thanks, your screens always look great.
hookedonnook said:
Sounds good. Can I apply this if I have the perm root 9.9.9? Also, what is meant by flashable/not flashable? Thanks, your screens always look great.
Click to expand...
Click to collapse
If you want to change to this modified version then boot into CWM wipe data and advanced> dalvik cache, restore this ROM and reboot. Do not perform a hard factory reset if you have CWM or you will fall into a bootloop. Flashable zip is a package created with a different technique (RUU) and can be used for flash not only ROM's but apps, mods and a CWM backup is when you make a backup of your entire system including data, cache, boot, etc images and is just used for ROM's.
Also another pro of a flashable zip is that you get more flexibility with the package, you could modify its content to your taste adding/removing apps, files so from a custom ROM you can make your own custom one.
~ Veronica
Please also add anycut to easy instal an additional keyboard.
With NT Hidden Settings, there's the option of "Accessibility Settings", there you can choose which keyboard to use at "Input Method"
I'm running Swype with no problem
Update 15/2/12
Alright UPLOADING v2, will be a flashable zip now no more CWM backup folder and a standar Apk_Package_Installer.zip with:
* Androzip
* Anycut
* App cache cleaner
* Dolphin Browser
* ES Bookmark Manager (to create shortcuts of your media on desktop)
... These apps are included in the v2 of this ROM.
As i have mentioned in this thread with a flashable zip you get more flexibility.
What does that mean? It means that you can delete apps that you don't want or add others by drag and dropping it/them within /system/app of the .zip
Edit: OP UPDATED!
~ Veronica
lavero.burgos said:
Alright UPLOADING v2, will be a flashable zip now no more CWM backup folder and a standar Apk_Package_Installer.zip with:
* Androzip
* Anycut
* App cache cleaner
* Dolphin Browser
* ES Bookmark Manager (to create shortcuts of your media on desktop)
... These apps are included in the v2 of this ROM.
As i have mentioned in this thread with a flashable zip you get more flexibility.
What does that mean? It means that you can delete apps that you don't want or add others by drag and dropping it/them within /system/app of the .zip
Edit: OP UPDATED!
~ Veronica
Click to expand...
Click to collapse
Sent from my Nexus S using xda premiu
It works for me! Thanks again
claudiaa said:
Sent from my Nexus S using xda premiu
It works for me! Thanks again
Click to expand...
Click to collapse
there is a thanks button, do not spam. or you will be warned by the moderators
(this is spam) so remove when understood
edit: are the steps the same if you update from v1?
424aca said:
edit: are the steps the same if you update from v1?
Click to expand...
Click to collapse
Steps are similar but not the same, i have updated the installation steps so users install it right.
~ Veronica
I added a download link to a B&N_rebloat_FULL_1.4.0.zip i just made if anyone is interested. As the title of the flashable zip say it will rebloat your Nook with all B&N apps.
I placed the modified version of Hulu+ instead of the original one, that is the only "change".
~ Veronica
Problem:
ES file explorer wont take root control.
How do you fix this?
and do we have all memory space on the nook?
edit:
where can you get the market?
do you have to flash that gapps zip by indirect(i think he made one)
424aca said:
Problem:
ES file explorer wont take root control.
How do you fix this?
and do we have all memory space on the nook?
edit:
where can you get the market?
do you have to flash that gapps zip by indirect(i think he made one)
Click to expand...
Click to collapse
do you get an error if so what was it, did you select Allow when su request pop up?
Edit: gapps are already included and for get more memory space you have to reformat your nook there is a guide for that.
lavero.burgos said:
do you get an error if so what was it, did you select Allow when su request pop up?
Edit: gapps are already included and for get more memory space you have to reformat your nook there is a guide for that.
Click to expand...
Click to collapse
the market is not there
as for ES
error is
Sorry test failed. Feature cannot run on your phone.
(after it says superuser has let it root access)
(i also flashed the debloat zip, before so if i dont flash that,
will the other gapps stuff be there)
424aca said:
the market is not there
as for ES
error is
Sorry test failed. Feature cannot run on your phone.
(after it says superuser has let it root access)
Click to expand...
Click to collapse
Look again or reflash please i added all gapps (tested), uninstall ES File Eplorer with the Root App Remover i added , reboot your device and install it again from Android Market (there is a new version anyway) that will fix it.
EDIT: REFLASH AGAIN THE ROM AND DO NOT FLASH THE REBLOAT .ZIP I RECHECKED THE UPDATER-SCRIPT THAT I HAD "MODIFIED" BUT IT DID NOT SO DO NOT FLASH THAT UNTIL I FIX IT
EDIT2: FIXED, LINK UP AGAIN
~ Veronica
lavero.burgos said:
Look again or reflash please i added all gapps (tested), uninstall ES File Eplorer with the Root App Remover i added , reboot your device and install it again from Android Market (there is a new version anyway) that will fix it.
EDIT: REFLASH AGAIN THE ROM AND DO NOT FLASH THE REBLOAT .ZIP I RECHECKED THE UPDATER-SCRIPT THAT I HAD "MODIFIED" BUT IT DID NOT SO DO NOT FLASH THAT UNTIL I FIX IT
~ Veronica
Click to expand...
Click to collapse
thank you
it is now fixed
so for now, do not debloat.
THANK YOU SO MUCH!!!
(Clicking thanks button, again)
UPDATE: V4.7t5
http://db.tt/kyDzE9jU DOWNLOAD
>> New! Zram & Swap Control V2.5
>> New! Custom busybox utilisation
t5 >> - Swap priority setting using custom busybox download. Means switching different swaps on and off is much faster.
t5 >> Using 4 equal sized swap files for Cache based swap running with equal priority. Much faster!!
-----------------------------------------
UPDATE: V4.7t4
>> streamlined the tasks reduced total number by half and now SIYAHMODS RUNS NEARLY TWICE AS FAST!
>> Improved Sound control. Sliders don't miss registration when changing and the Scene opens much faster
DOWNLOAD:
http://db.tt/4TB1SFxd V4.7t4
-----------------------------------------
UPDATE: V4.7t3
>>> New timeout switching checks. If the app closes without switching back to original timeout value. The previous value is recorded and set next time you launch the app. Failing that it will set 1min.
>>> tweaked tasks some more. Faster now.
>>> Fixed swap 3rd & 4thROM swap
DOWNLOAD: http://db.tt/S1PeuGuV V4.7t3
TO DO:
>>> fix inconsistencies in dialouge text
>>> add running dialogue info like already implemented for some of the newer features (swap & swap 3rd/4thROM)
>>> Streamline older tasks
>>> Make stand-alone apps for quick access to core features.
>>> reintroduce priority setting for swap v control
>>> introduce optional kernel tweaks for swap control
-----------------------------------------
UPDATE: V4.7t2
http://db.tt/EnHZlmLq Download V4.7t2
>>> fixed heaps of old tasks, cleaned every aspect.
>>> fixed boot to 3rdROM, should now swap back as the 3rdROM boots
Fixed many info dialog typos etc.
-----------------------------------------
V4.7 t1 http://forum.xda-developers.com/showthread.php?p=40606177
NEW VERSION V4.6 APP!
***BIG UPDATE... MORE TO COME***
Quad boot has arrived!
>>>Clone 3rd to 4thROM
>>>Swap 3rd and 4thROMs
>>>Name 4thROM
>>>Remove 4thROM
>>>Brand new 4thROM popup window
>>> Big clean up to total task operations.
>>> Simlink .defaultrom from the "Zero" folder so S tweaks will be able to access this file from AOSP ROM.
http://db.tt/CM0B2tkP V4.6
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my GT-I9300 using Tapatalk 2
-----------------------------------------
http://db.tt/CM0B2tkP V4.6
http://db.tt/s31yL8LI V4.5.3
http://db.tt/Z0rWOQes V4.5.2
http://db.tt/BniuZzS3V4.5.1
http://db.tt/rC3qtyBH V4.5
http://db.tt/2Kxex5Qd V4.4.1
http://db.tt/XmWxfV81 V4.2
http://db.tt/FyojzrvN V4.1
-------------------------------------------
QUICK START GUIDE TO GET A 3RD ROM INSTALLED
#1. Tap "Swap 2nd/3rd ROM positions
#2. Tap boot to 2nd Utils
#3. Install a new 2ndROM
Done!!...
-----------------------------------------
Use the latest version 4.5.1 apk from the dropbox link above... the direct links below are ancient. Ignore. (Will get round to updating one day )
Basics:
What is SiyahMods?
>>>SiyahMods is an app which works with Siyah kernel and its Dual Boot functionality.
>>>It has a series of operations which manipulate your 2ndROM as well as allowing a 3rdROM as well. The exact same cool operations are mirrored work on the 3rdROM too.
What can it do?
>>>SiyahMods can boot directly into 2ndROM, 3rdROM or Siyah recovery (2ndROM utils from S-tweaks). It can also swap 2nd/3rdROM positions as many times as you like.
>>>There is also a ROM tools menu which allows for both 2nd & 3rd ROMs, the following functions:
1.> Shrink ROM image file size to save space
2.> Restore ROM size to default 1.5GB (1536MB).
IMPORTANT: The restore function is necessary for Siyah recovery dual boot functions to work properly.
To flash a CWM zip to 2ndROM it must be 1536MB. So before flashing a zip run this restore function. After you can shrink it again if you like.
Also to swap primary with 2ndROM you must restore to 1536MB.
Restoring a Nandroid backup you can just format 2ndROM system first.
You CAN make a nandroid back up from Siyah recovery WITHOUT restoring the system image size. (Backup 2ndROM from a shrunk size WILL work).
3.> Mount system image. To either /2 or /3 directory for 2nd and 3rd ROMs. So you can access the system to manually push apk's edit build.prop etc.
4.> Unmount
5.> Name ROMs
6.> Remove (delete) ROMs
>>> the "?" Button allows you to toggle popup information prompts ON or OFF which help guide beginners and allow last minute aborting of operations. Once you know what you're doing toggle off for faster access
PLEASE USE THE LATEST APK LINKS ABOVE THE LINKS BELOW ARE OUT OF DATE
nice work rlorange... these fixed size is much better than dynamic configuration
Great...+1
Thanks Mate
"D"
Nice work!
So no problems to report?
Sent from my GT-I9300 using xda premium
I got omega as my second rom, how much space should I give it?
bradputt said:
I got omega as my second rom, how much space should I give it?
Click to expand...
Click to collapse
Check by downloading root explorer or any other root access file manager and viewing system folder while using 2nd rom. I use wanam which is under 1GB so Omega should be the same-ish. I will be adding a 1.15GB version soon. That will def be big enough.
Sent from my GT-I9300 using xda premium
New sizes added:
450MB perfect for Cm10 2nd ROM (with a bit of breathing room)
1.125GB safe size for nearly All deodexed stock and custom ROMs (Omega, Wanam...)
1.5GB restore to default. !!NOT tested for backup- restore to 2nd ROM/swap ROMs/clone tool in dual boot utility app yet
Sent from my GT-I9300 using xda premium
Works perfect for me running Paranoid Android, shrunk to 528 but might go down to 450
dantheman122 said:
Works perfect for me running Paranoid Android, shrunk to 528 but might go down to 450
Click to expand...
Click to collapse
Glad to hear mate.
Sent from my GT-I9300 using xda premium
rlorange said:
So here it is guys:
BACKUP YOUR SECOND ROM from S-tweaks app before using this mod yeah?
Click to expand...
Click to collapse
is this above a question ?
-=-=-
flashed 1Gb script without BACKUP (just for testing) and the sec rom boot fine ! 128 mb left on system !
great job mate ! i`ve been waiting for this !
it must be a MUST on every OP !
-=-
(Q!) what if i`ll flash again Siyah ? will it keep the same size ?
-=-
... i`ll try myself
-=-=- ANSWER
flashing siyah 1.7rc1 , same size system partition kept for sec rom !
i`ll thank you again !
The zips will work as long as the size of the one you choose is bigger than the size of the 2nd rom /system partition... having said that there is 20-30mb needed for file system stuff so don't cut it too fine
The smaller system.img file should stay how it is until you format 2nd rom partition or try some other operation which breaks so restoring default 1.5gb size.
Sent from my GT-I9300 using xda premium
rlorange said:
The zips will work as long as the size of the one you choose is bigger than the size of the 2nd rom /system partition... having said that there is 20-30mb needed for file system stuff so don't cut it too fine
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
of course ! and some new guys has to know that flashing more MODS/ZIPPS after shrinking will require more system partition room so , do not suffocate it !
"BACKUP YOUR SECOND ROM from S-tweaks app before using this mod yeah?"
Lol! Must be an Australian figure of speech means: you understand?/this is common sense
Sent from my GT-I9300 using xda premium
rlorange said:
"BACKUP YOUR SECOND ROM from S-tweaks app before using this mod yeah?"
Lol! Must be an Australian figure of speech means: you understand?/this is common sense
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
got ya ! i figured out later
xanthrax said:
of course ! and some new guys has to know that flashing more MODS/ZIPPS after shrinking will require more system partition room so , do not suffocate it !
Click to expand...
Click to collapse
Indeed!... but you can always make it bigger by flashing a different one later...
I want to use Aroma installer so the user can choose their own size but I'm waaaay to noob to pull that off without help
Sent from my GT-I9300 using xda premium
rlorange said:
Indeed!... but you can always make it bigger by flashing a different one later...
I want to use Aroma installer so the user can choose their own size but I'm waaaay to noob to pull that off without help
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
even better ! Aroma rullz !!!
-=-
well , of course you can make it bigger via script or flashing another size but i was imaging that scenario when someone has a limit system partition , he forget about that and after a MOD flash start crying , is not working ! i bricked my phone ... etc ... as if you don`t know how people are ...
---------- Post added at 10:30 AM ---------- Previous post was at 10:14 AM ----------
maybe you can check this ... AROMA ... or you already did ... :angel:
Been looking, actually I don't think edify script can allow one to input a direct value... only category/check box options...
Ah its good enough for now... lucky this only affects second rom... not phazed by whiners
Sent from my GT-I9300 using xda premium
... and if after shrink the sec rom will be cloned to primary , gues what ? the shrinked partition will be cloned as well so , more storage saved !:good:
xanthrax said:
... and if after shrink the sec rom will be cloned to primary , gues what ? the shrinked partition will be cloned as well so , more storage saved !:good:
Click to expand...
Click to collapse
No this certainly won't work as the primary ROM actually lives in the proper system partition which is formatted to 1.5GB
Sent from my GT-I9300 using xda premium
i have MANUAL step to increase virtual memory (such as adding secondary ram). But in this mod YOU DO NOT NEED to create a partition ext2/3/4. This step will help u if ur kernels doesn't have swap partition support. Ok, check it out,, its very easy and simple method
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
1. Download swap file from here
2. Extract it so from 800kb will be 800mb Peace
3. Choose 1 from 3 files size for swap that u want ( up to you )
4. Copy file to /sdcard
5. Make sure you have BusyBox installed
6. Then, U can type on "Terminal Emulator"
for example im using with 128mb size :
- to turned on swap
su
swapon sdcard/swap128
Click to expand...
Click to collapse
- to turned off swap
su
swapoff sdcard/swap128
Click to expand...
Click to collapse
-to check swap status
su
free
Click to expand...
Click to collapse
NOTE :
- on terminal emulator, type the name of swap file correctly and the place must correctly too . . . (experiment)
- If u restart ur phone, swap will reset and u must type on emulator again. But if u want to run my script at each boot, u can try it with app swapper2 or ROEHSOFT RAM Expander
- on some devices if u will connect to usb storage, then u must turn off swap before u connect usb storage to PC. But, this problem can be resolved by installing USB OTG (MTP) or using swapper2
For anyone who got error like 'not found', try to change permissions on /system/xbin "swapon and swapoff" to (tick all box)
TUTORIAL USING THIS SCRIPT WITH SWAPPER2
sorry for my bad english
IF I HELPED YOU PRESS THANKS BUTTON
good work
but in wrong forum
yamin8000 said:
good work
but in wrong forum
Click to expand...
Click to collapse
oops.
so, what the forum to post above thread?
-im new here
edit. changed to script
i tested but terminal say swap not found
king40 said:
i tested but terminal say swap not found
Click to expand...
Click to collapse
You must type the name of swap file correctly, so swap will detected. If u choose 256mb size, so on terminal emulator must 256 too. Look at purple colour above. im using 128mb.
Besides that, the place of swap file must appropriate too.
- try with costum kernel and install busybox
is it okay to use a class 4 sdcard ??
kelvin99 said:
is it okay to use a class 4 sdcard ??
Click to expand...
Click to collapse
Maybe not bad, but i suggest u to use with class 6 or higher. Swap process depend on how much speed sdcard to read and write. So, if u use with higher class sdcard, then it will give a better result.
hurriX8 said:
You must type the name of swap file correctly, so swap will detected. If u choose 256mb size, so on terminal emulator must 256 too. Look at purple colour above. im using 128mb.
Besides that, the place of swap file must appropriate too.
Click to expand...
Click to collapse
I did all u said but mine too says swap not found
MCM4u said:
I did all u said but mine too says swap not found
Click to expand...
Click to collapse
do you have using custom kernel??
try it with custom kernel and swap will found.
edit. write "swapon" not "swapON" on terminal emulator
Does it work on xperia s?
Sent from my Xperia S using xda premium
alveos said:
Does it work on xperia s?
Sent from my Xperia S using xda premium
Click to expand...
Click to collapse
of course.
it will work on ur Xperia S
hurriX8 said:
do you have using custom kernel??
try it with custom kernel and swap will found.
Click to expand...
Click to collapse
i'm using the latest CM10 nightly
MCM4u said:
i'm using the latest CM10 nightly
Click to expand...
Click to collapse
then do you have installed busybox??
hurriX8 said:
i have MANUAL step to increase virtual memory (such as adding secondary ram). But in this mod You do not need to create a partition ext2/3/4 because im using swap file.
1. Download swap file from here
2. Extract it so from 800kb will be 800mb Peace
3. Choose 1 from 3 files size for swap that u want ( up to you )
4. Copy file to /sdcard
5. Make sure you have BusyBox installed
6. Then, U can type on "Terminal Emulator"
for example im using with 128mb size :
- to turned on swap
su
swapON sdcard/swap128
- to turned off swap
su
swapOFF sdcard/swap128
-to check swap status
su
free
note :
- on terminal emulator, type the name of swap file correctly and the place must correctly too . . .
- Much better if you have unlock bootloader / custom kernel your phone . . . (swap process can be better so more fast and swap will be easier to found)
- on some devices if u will connect to usb storage, then u must turn off swap before u connect usb storage. But, this problem can be resolved by installing USB OTG
sorry for my bad english
IF I HELPED YOU PRESS THANKS BUTTON
Click to expand...
Click to collapse
Unlocked bootloader only??
sandorjuraszik said:
Unlocked bootloader only??
Click to expand...
Click to collapse
NO . . .
it for all rooted devices with busybox installed.
with unlock only increase swap speed :good:
hurriX8 said:
then do you have installed busybox??
Click to expand...
Click to collapse
no i don't, is it required?
MCM4u said:
no i don't, is it required?
Click to expand...
Click to collapse
yes. its very important.
hurriX8 said:
yes. its very important.
Click to expand...
Click to collapse
it still doesnt work
i did everything exactly the way u said
Good work
Sent from my I9082 using xda app-developers app
MCM4u said:
it still doesnt work
i did everything exactly the way u said
Click to expand...
Click to collapse
Im really sorry because i cnt help u then. On my mini pro with HavenDroid jB 4.2.2 rom and LuPus v7 kernel it work very well.
I've tried to help you as much as possible. Maybe u can try with other mod such as Zram :angel:
Nizamkhanfb said:
Good work
Sent from my I9082 using xda app-developers app
Click to expand...
Click to collapse
Does it work on your phone dude?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Let's do some SWAPPIN'!
---------------------------
Stock already have ZRAM - 215 MB, but it's locked directly in our RAM and it's not very effective.
We will remove this ZRAM and add SWAP RAM on our cache - we have almost 1 GB free unused on /cache.
We will exploit this and add some SWAPPIN'
Our SWAP will prevent from killing recent apps, when we are using them. Apps will be save in our SWAP RAM, not in direct RAM. We will have access to 6-10 opened apps at the same moment.
---------------------------
I'd like to thanks to http://forum.android.com.pl/forum/1137-lg-g2-mini-d620/ for excellent threads!
This guide couldn't be created without polish dev @partyzant_x
---------------------------
Requirements
-ROOT
-BusyBOX from Google Play Store.
---------------------------
Add Init.d
-Install Inid.d Toggler
-Open it and press Activate.
-Wait and reboot the phone.
-When rebooted, go to this app, and click "Verify". If it says Init.d supported, youre ready to go!
---------------------------
Add SWAP
-First you'll need to remove ZRAM, to download ROOT EXPLORER or ES explorer, and go to /system/etc and search -init.lge.zramswap.sh. Then remove it.
Download this file.
-Paste it to /system/etc/init.d/
-Give the file rwxrwxrwx(775) perrmisions and owner group - root.
-Reboot.
To try do you have SWAP, download and install this apk.
---------------------------
How to change size of SWAP
-Go to ES explorer and find 98_cache in init.d, whitch you installed.
-Open it by ES text editor
-Find "swap_file_size_mb=400;" and change the size - max is 700 MB.
-Save changes.
-Reboot.
---------------------------
When you encounter problem or in DISC INFO SWAP will be missing
Download Script Manager.
-Go to your 98_swap_file and click it.
-Select "su" "boot" and point "Is executable"
-Click "Run".
-Now it will be visible.
-Reboot.
---------------------------
TWEAKS!
If you want to test some additional features who can further develop you device, please read.
1. If you'r apps still refreshing after time, download Kernel Auditor and go to ->Low memory killer.
Stock L using very high parameter's of this, so you should lower them. Click "Apply on boot" and set "Light or Medium" option.
Thank to @Zaaap72 for this feature. It really works!
2. I've applied some new test options in Virtual Memory function(Kernel Auditor), and i shoul'd say it works perfectly. If you want to test it, to maximize your "SWAPPIN" set:
dirty ratio -> 20
dirty expire centisecs -> 100
swapiness -> 60 (should be set)
vfs cache pressure -> 80 - 100 you choose.
You should also knew that if you will using some RAM APP killers, like one touch clean ram or something, or you will remove all apps very often i recent apps panel - your SWAP will don't work!
---------------------------
Version: Stable
Last update:09-06-2015
How many apps u can have open at the same time?
Also can you post a ss with ur ram usage
Sent from my LG-D620 using XDA Free mobile app
Diaze said:
How many apps u can have open at the same time?
Sent from my LG-D620 using XDA Free mobile app
Click to expand...
Click to collapse
I switched messenger, free sms app, internet and facebook app without ANY killed app. At the same time.
I think max for it is the SWAP size cap - 400 mb for apps, so i dont know, 6-10 apps open at the same time.
In swap file which i uploaded i set swapiness to "60" and SWAP size to 400 MB - should suffice.
Give it a try!
Radac Stunghthumz said:
I switched messenger, free sms app, internet and facebook app without ANY killed app. At the same time.
I think max for it is the SWAP size cap - 400 mb for apps, so i dont know, 6-10 apps open at the same time.
In swap file which i uploaded i set swapiness to "60" and SWAP size to 400 MB - should suffice.
Give it a try!
Click to expand...
Click to collapse
can you make a guide for cm11 please? i already can have like 7 apps opened at time..but i want more )
and the swap size is taken from internal memory ?
i`m a newbie
but..u have only 3 apps openes and u have only 150 free ram? that`s bad..+19mb on swap partition...
i have like 5 apps on cm11 and still 270mb free..
How about battery life? Drop or not?
Diaze said:
can you make a guide for cm11 please? i already can have like 7 apps opened at time..but i want more )
and the swap size is taken from internal memory ?
i`m a newbie
but..u have only 3 apps openes and u have only 150 free ram? that`s bad..+19mb on swap partition...
i have like 5 apps on cm11 and still 270mb free..
Click to expand...
Click to collapse
I think that you're boring with your CM11...
Can there be any thread without your CM11 and multitasking?
nlooooo said:
I think that you're boring with your CM11...
Can there be any thread without your CM11 and multitasking?
Click to expand...
Click to collapse
i like stock but i want a stock rom that performs like cm11..that`s why i`m posting about cm11..maybe some1 can do a tweak for the stock rom so it can perform better...ur post is useless
And DiskInfo says that I don't have any swap, and I don't think that the problem is init.d.
Cafi96 said:
And DiskInfo says that I don't have any swap, and I don't think that the problem is init.d.
Click to expand...
Click to collapse
After my first reboot my init.d folder was gone even in root explorer, rebooted and problem solved plus working swap
Sent from my LG-D620 using XDA Free mobile app
Cafi96 said:
And DiskInfo says that I don't have any swap, and I don't think that the problem is init.d.
Click to expand...
Click to collapse
steffenbakke said:
After my first reboot my init.d folder was gone even in root explorer, rebooted and problem solved plus working swap
Sent from my LG-D620 using XDA Free mobile app
Click to expand...
Click to collapse
Are the problem solved?
Sir Steffen, please tell me how SWAP works,is there visible performance update like switching trough apps?
Diaze said:
can you make a guide for cm11 please? i already can have like 7 apps opened at time..but i want more )
and the swap size is taken from internal memory ?
i`m a newbie
but..u have only 3 apps openes and u have only 150 free ram? that`s bad..+19mb on swap partition...
i have like 5 apps on cm11 and still 270mb free..
Click to expand...
Click to collapse
Dear Sir
I don't know how it works on CM 11, but should like the same way as on stock, but i cannot guarantee it. Just test yourself, if something go wrong, before this, do backup. But i don't think this test could do so much damage.
You should know CM is going different path than stock firmwares. Memory optimization is different in many ways. LG gave us very good system, we only try to customise it to our very own needs.
@Radac Stunghthumz
give credits to @partyzant_x not to some random guy lol
and max isnt 900mb cuz cache is 900mb
id say 700 is max
sebatox said:
@Radac Stunghthumz
give credits to @partyzant_x not to some random guy lol
and max isnt 900mb cuz cache is 900mb
id say 700 is max
Click to expand...
Click to collapse
Thank you. You're right. All credits go to @partyzant_x
Main post edited. Thank you Sir for your memory.
Radac Stunghthumz said:
Are the problem solved?
Click to expand...
Click to collapse
Nope, i can't execute this file. I have this script and the link2sd script in my init.d folder, the second works but the first doesn't.
Link2sd scriprt has rwx r-- rwx permission, the swap one has rwx rwx rwx permission, but i don't think this is the problem, this file is impossible to exec in any case.
Cafi96 said:
Nope, i can't execute this file. I have this script and the link2sd script in my init.d folder, the second works but the first doesn't.
Link2sd scriprt has rwx r-- rwx permission, the swap one has rwx rwx rwx permission, but i don't think this is the problem, this file is impossible to exec in any case.
Click to expand...
Click to collapse
Hmm
Do you have this in your /cache file?
Please check, i think it could be problem with scripts.
Radac Stunghthumz said:
Hmm
Do you have this in your /cache file?
Please check, i think it could be problem with scripts.
Click to expand...
Click to collapse
This is what i got in there. No swap file, the script always give me error if I try to start it manually.
Cafi96 said:
This is what i got in there. No swap file, the script always give me error if I try to start it manually.
Click to expand...
Click to collapse
Dear Cafi,
Do you have files in your /system/etc/init.d folder? Are there 98 swap file?
SManager has SU priveleges?
If nothing of theese two, you have 2 options.
-Download Kernel Auditor and in init.d click emulate init.d and press below 98_swap_blabla and execute, try reboot then. Tell me if it works sir.
-I can sent you my file, whitch is exact same as in main thread. You can place it there and we will see what happens.
Radac Stunghthumz said:
Dear Cafi,
Do you have files in your /system/etc/init.d folder? Are there 98 swap file?.
Click to expand...
Click to collapse
Of course.
SManager has SU priveleges?
Click to expand...
Click to collapse
Yes, through Kingroot.
If nothing of theese two, you have 2 options.
-Download Kernel Auditor and in init.d click emulate init.d and press below 98_swap_blabla and execute, try reboot then. Tell me if it works sir.
Click to expand...
Click to collapse
Already done. The script appears in Kernel Adiutor menu but nothing happens.
-I can sent you my file, whitch is exact same as in main thread. You can place it there and we will see what happens
Click to expand...
Click to collapse
That's exactly what I did.
If you want you can contact me via Skype, because we are posting too much.
Works great thanks!
Ps. I could not get it done with busy box free when i installed busy box pro it worked...
Cafi96 said:
Of course.
Yes, through Kingroot.
Already done. The script appears in Kernel Adiutor menu but nothing happens.
That's exactly what I did.
If you want you can contact me via Skype, because we are posting too much.
Click to expand...
Click to collapse
Here you are friend, maybe someone could use this as help too.
https://drive.google.com/file/d/0B0GAV1fFSQklY0NXOWEtUVZXeGM/view?usp=sharing
Try it, paste to /cache/swap/ and reboot, tell me if it works
panagiotisden2 said:
Works great thanks!
Ps. I could not get it done with busy box free when i installed busy box pro it worked...
Click to expand...
Click to collapse
Damn busy box, you could try it using SManager. You feel the difference between this and stock ZRAM?
How many apps now you can switch on?
I will play with stock ZRAM now...maybe it's not that bad as i think, if i will discover something new i let you know.
Busybox by Stericson is the most complete free busybox.
Thanks a lot for this tutorial, Radac. Swap works and my phone just became faster. You are a life saver