last month i changed my ROM (CM 10.1 i think) on sony xperia u everything was going fine until no one could call me (Number Busy) but i could call everyone then i tried to look in settings but nothing,then returned to factory default ROM and from then nothing , phone seems like dead but when i charge it charging indicator (red little circle) turns on,i tried trick with holding battery 10mins out and then charging but again failed.
I BOUGHT THIS PHONE USED BUT, EVERYTHING WAS FINE ULTIL FACTORY RESETING
(EXCEPT PROBLEM WITH CALLING)
duxishere said:
last month i changed my ROM (CM 10.1 i think) on sony xperia u everything was going fine until no one could call me (Number Busy) but i could call everyone then i tried to look in settings but nothing,then returned to factory default ROM and from then nothing , phone seems like dead but when i charge it charging indicator (red little circle) turns on,i tried trick with holding battery 10mins out and then charging but again failed.
I BOUGHT THIS PHONE USED BUT, EVERYTHING WAS FINE ULTIL FACTORY RESETING
(EXCEPT PROBLEM WITH CALLING)
Click to expand...
Click to collapse
Factory data reset is not factory default ROM, what exactly did you do, factory data reset or have you flashed stock ROM?
Can you enter flash or fastboot mode? Remove the battery again before you try both, and open flashtool window to see if connected in flash/fastboot mode.
ChikeD said:
Factory data reset is not factory default ROM, what exactly did you do, factory data reset or have you flashed stock ROM?
Can you enter flash or fastboot mode? Remove the battery again before you try both, and open flashtool window to see if connected in flash/fastboot mode.
Click to expand...
Click to collapse
I Flashed stock ROM
Well i was pressing power button and flash mode and green light apeared (AFTER A WHILE) but trying to turn on phone with power button doesn't work.
duxishere said:
I Flashed stock ROM
Well i was pressing power button and flash mode and green light apeared (AFTER A WHILE) but trying to turn on phone with power button doesn't work.
Click to expand...
Click to collapse
Doesn't work how?
Doesn't vubrate or stuck on logo or stuck before logo?
Have you used PC Companion with this phone before?
ChikeD said:
Doesn't work how?
Doesn't vubrate or stuck on logo or stuck before logo?
Have you used PC Companion with this phone before?
Click to expand...
Click to collapse
Nothing. Just power button is not working, no logo or else , maybe something broke inside phone?
duxishere said:
Nothing. Just power button is not working, no logo or else , maybe something broke inside phone?
Click to expand...
Click to collapse
If you can enter flash mode, mMaybe you can relock bootloader and try yo repair with PCC or SUS.
Open flashtool window and connect in flash mode, see it stays in flash mode for about 45 seconds.
ChikeD said:
If you can enter flash mode, mMaybe you can relock bootloader and try yo repair with PCC or SUS.
Open flashtool window and connect in flash mode, see it stays in flash mode for about 45 seconds.
Click to expand...
Click to collapse
Well flash / fast boot mode not working, i tried simulated battery pull Power + Vol+/Vol- or Vol+ & Vol- and nothing,now when i press power button,
battery charging indicator start ticking for like 5-10 times... and then nothing...
duxishere said:
Well flash / fast boot mode not working, i tried simulated battery pull Power + Vol+/Vol- or Vol+ & Vol- and nothing,now when i press power button,
battery charging indicator start ticking for like 3-5 times... and then nothing...
Click to expand...
Click to collapse
Just pull out the battery for a minute, and then try flash mode first, nothing else.
Matbe the battery need to be charged.
Nevermind, i send it to service...
Ok it came from service guy i paid 4,2€ for it and it works, but what in the world he done that i couldn't ?
And what is best Cyanogenmod ROM for Sony Xperia U?
Related
Hello comrades,
I have xperia x10 mini pro. I rooted phone with Flashtool and installed CWM. I tried to boot it in flash mode (turned off phone, back button held and plugged in USB into the phone), but what I get is that my phone turned on always, like that I pressed Power button.
Earlier I couldn't boot it into the flash mode and I got that I charging battery, but after I installed CWM, phone always turns on.
Due to, I can't re-flash it because it always turns on. I tried with flashtool, PC companion, SEUS but all software need that I turn off phone and then hold back button and plug in usb and what I get is turned on phone. Please help me how to fix this problem.
I would like to re-flash it to stock 2.1.1.A.0.6 (2.1-update1).
Phone turns on even if I just plug in usb to phone (one end is in the PC and when I plug in other end into the phone, phone turns on). What is wrong guys?
bokivaol said:
Phone turns on even if I just plug in usb to phone (one end is in the PC and when I plug in other end into the phone, phone turns on). What is wrong guys?
Click to expand...
Click to collapse
Happened to me b4 if u want to repair with pc comp just remove the battery till u reach connection step then quickly connect battery and cable (nvm the cover) and hold back button when connecting if u do fast enough will work
sent from my u20i xperia x10 mini pro running mini cm9 3.0.2 on nAa ics 3
THX nAa. VERY MUCH!!!
Leave your phone plugged in and press POWER-HOME and BACK all together, as soon as the screen turns completelly black (backlight off too) releast POWER and HOME, and leave the back-button pressed, that will probably work too.
LukBoy99 said:
if u want to repair with pc comp just remove the battery till u reach connection step then quickly connect battery and cable (nvm the cover) and hold back button when connecting if u do fast enough will work
Click to expand...
Click to collapse
Can you explain me a little more detailed, i didn't get you very well. I am noob
How do you mean until I reach connection step, where should I reach connection step?
You take out the battery, then you go into PC Companion and follow the steps to repair your phone, until it asks to connect your phone in flash-mode.
Then do as he said (put the battery in etc.)
SmG67 said:
You take out the battery, then you go into PC Companion and follow the steps to repair your phone, until it asks to connect your phone in flash-mode.
Then do as he said (put the battery in etc.)
Click to expand...
Click to collapse
It doesn't work.
I tried and POWER-BACK-HOME buttons while the phone is plugged in (turned off and turned on), same sh..t. Phone starts like that I powered it on
stitypta had
What do you think, what will happened if I wipe it using CWM? Can I brick it on that way?
If you mean formatting your phone, so you don't have a system on there anymore... that probably will give you a brick. Flashmode is a hardware feature, implemented to install firmware and enable reparations to your phone's software.
Deleting everything you can will not magically solve your problem, as far as i know.
It might help if you get mad at the phone and abuse the back-button by repeatedly pressing it when connecting the phone.
SmG67 said:
If you mean formatting your phone, so you don't have a system on there anymore... that probably will give you a brick. Flashmode is a hardware feature, implemented to install firmware and enable reparations to your phone's software.
Deleting everything you can will not magically solve your problem, as far as i know.
It might help if you get mad at the phone and abuse the back-button by repeatedly pressing it when connecting the phone.
Click to expand...
Click to collapse
Does this mean that I have hardware problem. Phone works without any problem.
Somehow it doesn't detect you pressing the back-button, maybe there is some dust or dirt inbetween the contacts or something, since you flashed sucessfully before i don't think it's a serious hardware-problem.
SmG67 said:
Somehow it doesn't detect you pressing the back-button, maybe there is some dust or dirt inbetween the contacts or something, since you flashed sucessfully before i don't think it's a serious hardware-problem.
Click to expand...
Click to collapse
I didn't flashed it before, I couldn't do that. I couldn't unlock bootloader, because I couldn't boot it in flash mode (phone just show that battery charging), after installing CWM now phone even don't show that battery is charging (it turns on when I plug in USB in the phone without holding any button). This is nightmare!
You are still on the original firmware then?
I mean, your phone still works?
SmG67 said:
You are still on the original firmware then?
I mean, your phone still works?
Click to expand...
Click to collapse
Yes, I am on original firmware and phone still works, but I have problem to boot it in flash mode. When I plug in USB cable in the phone it turns on, like that I pressed POWER button. I don't press any button, but when I plug in usb cable 10-20 seconds and phone is on.
Yes, because your phone detects the usb-cable getting plugged in, even when it's off, it thinks you want to charge it, so (normally) it loads the kernel in order to start the charging-process, that is normal behaviour. I have been on a kernel that didn't support that feature, and it booted into the full rom before it started charging.
In short: the usb-port also functions as a power-button, sort off
Does the back-button work normally when you're on the firmware? (Like, open the app-drawer, pressing back-button should close it?)
SmG67 said:
Does the back-button work normally when you're on the firmware? (Like, open the app-drawer, pressing back-button should close it?)
Click to expand...
Click to collapse
Yes, the back button works perfect, closing apps (not close apps, but back to the phones "desktop"), back to previous pages in browser...
I am concerned because, before I installed CWM , when it was OFF and plugged in on USB, phone just showed black screen and when I clicked on some button I could see that battery is charging, that was all. Now, when I plug in USB it turns on like I pressed POWER button.
And off course never booted in flash mode because it turns on
SmG67 said:
Does the back-button work normally when you're on the firmware? (Like, open the app-drawer, pressing back-button should close it?)
Click to expand...
Click to collapse
What is app-drawer, I don't know what is that.
oh, that's the bit where you find all your installed apps, the grid you see when you press on the little triangle on the bottom of your desktop, or swipe up on the desktop.
I honestly don't know why your phone won't go into flash-mode though. Maybe try to take out your battery for about 10 minutes so your phone gets rid of all charge and static, and then try again.
SmG67 said:
I honestly don't know why your phone won't go into flash-mode though. Maybe try to take out your battery for about 10 minutes so your phone gets rid of all charge and static, and then try again.
Click to expand...
Click to collapse
I solved problem about POWER-ing on when I plug in USB. I installed new ROM "MiniCM7Pro_V21_Paul_XXX" via CWM because I didn't need to boot it in flash mode and now when I plug in USB I got that it charging battery and orange led diode.
But I can't boot it in flash mode even with new ROM, all the time orange led diode when I hold back button and plug in USB. I wiped out all date except something about "battery" from Advanced CWM options.
bokivaol said:
Hello comrades,
I have xperia x10 mini pro. I rooted phone with Flashtool and installed CWM. I tried to boot it in flash mode (turned off phone, back button held and plugged in USB into the phone), but what I get is that my phone turned on always, like that I pressed Power button.
Earlier I couldn't boot it into the flash mode and I got that I charging battery, but after I installed CWM, phone always turns on.
Due to, I can't re-flash it because it always turns on. I tried with flashtool, PC companion, SEUS but all software need that I turn off phone and then hold back button and plug in usb and what I get is turned on phone. Please help me how to fix this problem.
I would like to re-flash it to stock 2.1.1.A.0.6 (2.1-update1).
Click to expand...
Click to collapse
i dont have time to read if this was resolved but you need to leave your phone of for about 2 min the little bugger holds a charge for quit a bit you got one of the newer ones like mine i got this info from sony website at least 30sec power off before attempting to do the above steps also i do know how to get the phone out of this refer to the this thread http://forum.xda-developers.com/showthread.php?t=1635286&page=2 i only know this cause iam you !! lol as soon as i find a stock rom boom i am
http://minus.com/lbg0XZRW728Kwu ling for stock rom bro
follow step for step with the referance link above to reflash stock rom thanks that dude that told me
and it works cause i rebricked it lol i reflashed the same rom that did this to my phone and so far all above steps in referance link seem to be working"
http://forum.xda-developers.com/showthread.php?t=1636504 follow to the t you hav i.c.s 4.0 i guess works like a charm ! between both guides 25 min !!! yesterday i put 7hrs !! enjoy bro and thank thank the guys that root me they are the true credit iam just passing the info on too you that i got from both guides. look at my post and you will see i had this problem follow these steps and you will be fine remeber firs boot is the longest
best thing that ever happened to me was i bricked my my xperia mini pro u20 haha got ics out it lol
Xperia S Issues. Bad Flash
Hi, I read the 'existing users' installation instructions on the Sspeed ICS rom and installed the rom without installing the ics rom and kernel (I was tired). When booting, I go in a bootloop with the doomkernel screen. I can access recovery fine.
When holding vol+ and connecting to PC the phone goes back into it's bootloop and does not boot into fastboot.
When holding vol- and connecting to PC the phone flashes the green led and then boots into bootloop.
If I wait until the phone vibrates and lights up blue I can press the button to access recovery. I thought I could then just copy a gb rom over using USB mount but it is not detected on the PC.
Any help would be greatly appreciated.
Thank you
Try flashing stock ICS rom with flashtool
Sent from my LT26i using xda app-developers app
arc_u said:
Try flashing stock ICS rom with flashtool
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
Thanks but like I say fast boot and flashmode don't work so I can't access this option
I have the same problem too... I was hoping it would just work, but apparently it doesn't it needs a base rom.....I'm at work at the moment so i cannot fix my phone(i flashed it while at work which i shouldn't have done...) i noticed you can put it into fast boot in recovery - go to reboot options then fast boot can you see if that works
arc_u said:
Try flashing stock ICS rom with flashtool
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
unrealboot1 said:
I have the same problem too... I was hoping it would just work, but apparently it doesn't it needs a base rom.....I'm at work at the moment so i cannot fix my phone(i flashed it while at work which i shouldn't have done...) i noticed you can put it into fast boot in recovery - go to reboot options then fast boot can you see if that works
Click to expand...
Click to collapse
Hi thanks for your reply. I've tried going to fastboot
from recovery and I get a blue flashing light for one flash then it boots up again. Am I able to do anything at that point?
Glad I'm not the only stupid one on here
im not the expert here but I have bricked other phones before but never an xperia phone before. I have been reading up, the doom kernel has some mounting options, try to mount the sd card as mass storage so pc can send files accross to the phone. It should be mount and storage menu -> mount usb storage, then leave it on that menu and connect to computer, see if that works
unrealboot1 said:
im not the expert here but I have bricked other phones before but never an experia phone before. I have been reading up, the doom kernel has some mounting options, try to mount the sd card as mass storage so pc can send files accross to the phone.
Click to expand...
Click to collapse
Hi is this by the mount USB storage optuon ? I tried that and it wasn't detected on the PC. I could try another PC later. Recovery went into mount mode fine but nothing happened on the PC. Not even a blank drive which I know some people have had
If it blinks the LED for a second and reboots, that means that you don't have the drivers. Install drivers that are bundled with flashtool and try again. Or use Linux / OSX.
K900 said:
If it blinks the LED for a second and reboots, that means that you don't have the drivers. Install drivers that are bundled with flashtool and try again. Or use Linux / OSX.
Click to expand...
Click to collapse
I've used the laptop I'm trying it on for unlocking the boot loader and rooting. Maybe something corrupted the drivers. Will try on my Linux machine when I get home.
Thank you for all the help so far
Just Press VolUp and Power button until you get (one vibration followed by 3 consecutive vibrations) ... it will mean phone is shutdown.
Once shutted down, you will be able to press VolDown while plugging phone to PC and it will enter into flashmode.
Then you will be able to flash a FTF using flashtool
doesn't work...after the 3 beeps i let go and the screen turns black but then the boot loop happens again, i cant turn the phone off
Androxyde said:
Just Press VolUp and Power button until you get (one vibration followed by 3 consecutive vibrations) ... it will mean phone is shutdown.
Once shutted down, you will be able to press VolDown while plugging phone to PC and it will enter into flashmode.
Then you will be able to flash a FTF using flashtool
Click to expand...
Click to collapse
Hi, I do get the 3 vibrates and the phone stays off but instill got the individual quick flash then boot up.
Apologies mine stays off too, i just had it on charger so it turns on again after the 3 beeps, once off the charger it will turn off....I will be trying stuff when i get home.
Androxyde said:
Just Press VolUp and Power button until you get (one vibration followed by 3 consecutive vibrations) ... it will mean phone is shutdown.
Once shutted down, you will be able to press VolDown while plugging phone to PC and it will enter into flashmode.
Then you will be able to flash a FTF using flashtool
Click to expand...
Click to collapse
This will work, cause I had a similar issue a while ago
Good luck
depulle87 said:
This will work, cause I had a similar issue a while ago
Good luck
Click to expand...
Click to collapse
correct
Hello. I've got familiar problem. My phone blacked out after one day having about 35 % battery full. I was trying to reset it by holding power and volume up buttons - nothing happened. Just once showed up Sony logo but then again black nothing. Then it vibrate 3 times quickly and from that time it is shutted down, won't turn on even in flashmode. LED is not working too. I was asking for advice in local store servise and guy told me, that new phones have to be at least 30 min on the charger. So it's here now for hour, no result. :/
Just fixed this issue.
Follow these steps
1.hold vol up + power until phone vibrates 3 times.
2.open flash tool and point towards your stock file.
3.hit okay
4.wait for flash tool to prepare the files then it will prompt you to connect device in flash mode( vol down + power)
5.wait for it to finish. Unplug reboot and there you go fixed...
Hope this helps
Sent from my LT26i using Tapatalk 2
Cant do that, because PC dont recognize the phone. Phone has just red LED, thats all.
Alikalix said:
Cant do that, because PC dont recognize the phone. Phone has just red LED, thats all.
Click to expand...
Click to collapse
Use the bundled wallcharger!!! not a PC, pc has too less power to charge it now!
After wallcharger is placed hold vol+ and power for a few seconds until 3 vibrations, then let the phone on charger for atleast 2 hours, if all is good phone will bootup to the "charging animation"
Regards
Bin4ry said:
Use the bundled wallcharger!!! not a PC, pc has too less power to charge it now!
After wallcharger is placed hold vol+ and power for a few seconds until 3 vibrations, then let the phone on charger for atleast 2 hours, if all is good phone will bootup to the "charging animation"
Regards
Click to expand...
Click to collapse
Something similar happened to me. I have the bugged version of chargemon (only can charge with phone on) and accidentally discharged completely. The phone didn't boot, didn't charge and didn't do the 3 vibrations thing. So I put the battery off, conected the wall charger, putted the battery and it booted
It's really easy to remove the battery, you just need to be careful
After using recovery and install a new kernel ( seems not compatible ) after choose reboot to system option my Xperia S didn't function anymore and I couldn't able to use keys to reset or power on my phone.
I try all of combination of keys but nothing
I put in charging more than 8 hour but nothing ( only first solid RED led appeared and after hours it goes off and when try to charge another time it did the same )
when I connect to PC the flashtool shows it connected with debugging off and do nothing.
I can't go on flash mode or fast mode to reinstall again.
would some one help me to how can I bring my phone in live. ( I haven't a repair sony service in my town )
Have you tried what I said?
skip0pot2mus said:
Have you tried what I said?
Click to expand...
Click to collapse
What did you said?
It's not bricked, one of my Xperia S phones did this to me on multiple occasions. The first time i just let it charge over night, or until the solid red LED turned to solid orange LED. The patience waiting for it to turn to an orange LED is the key here i noticed after it happening several times, interrupt it each time and it may as well be bricked through lack of patience.
Thread moved to Q & A section, kindly post in the relevant section next time.
3x vibe
Napolee said:
After using recovery and install a new kernel ( seems not compatible ) after choose reboot to system option my Xperia S didn't function anymore and I couldn't able to use keys to reset or power on my phone.
I try all of combination of keys but nothing
I put in charging more than 8 hour but nothing ( only first solid RED led appeared and after hours it goes off and when try to charge another time it did the same )
when I connect to PC the flashtool shows it connected with debugging off and do nothing.
I can't go on flash mode or fast mode to reinstall again.
would some one help me to how can I bring my phone in live. ( I haven't a repair sony service in my town )
Click to expand...
Click to collapse
had the same last night, hold the vol+ and vol - key pressed together, then press the power for about 20 secs you get a 3x vibe, then connect and flash
corum3 said:
had the same last night, hold the vol+ and vol - key pressed together, then press the power for about 20 secs you get a 3x vibe, then connect and flash
Click to expand...
Click to collapse
As I wrote I try all combination of keys but nothing changed...
Just when I plug to PC red LED goes on but after about an hour it goes off , and when I replug it goes on again...
Last days when I plug to wall charger red LED acts the same pluged to PC but now red LED is off about 8 hours connected to charger....
Only the flashtool recocnised the phone with usb debugging off when I connect to PC but I can't go to flash mode or fast boot mode...
Is there any commands with an application that works with xperia s and re write its bootloader when its not in flash or fastboot modes.
I was installed all of the derivers needed for adb and ... when my Xperia S was working...
would know someone help me to take my phone works agian?
Ohh man that's some pain in the ass!I don't know man you should try it again but explain me again you can only see red led light and nothing else???I had almost the same problen but luckily for me my usb debugging was checked.I don't know man google it just to got the usb debugging.If you could do that than this is the post for you....however if you don't... http://forum.xda-developers.com/showthread.php?p=31884091
Sent from my LT26i using xda premium
Hi,
I own a Xperia p, running honami moonwalker v8. Recently i decided to upgrade to CM11. I flashed the CM11 unofficial ROM from this website nightly 2 i think. I did a clean install (erase everything and clear cache) But when i pressed reboot (on cwm) i got a black screen. When you hold the power button it vibrates but screen doesnt turn on, the led goes red for about 2sec and goes off. i tried holding power button and volume up but same result, vibrates and nothing comes up. Even when I make it vibrate 3 times, no result. Im desperate guys please help me i will appreciate your help greatly. And if this means anything, when i installed zip from sd card, it just said installing, and after a few minutes, said install complete. Is this normal? since it didnt show anything in between. PLEASE HELP I WILL TRY DONATE TO WHOEVER FIXES MY PROBLEM.
someguyonearth said:
Hi,
I own a Xperia p, running honami moonwalker v8. Recently i decided to upgrade to CM11. I flashed the CM11 unofficial ROM from this website nightly 2 i think. I did a clean install (erase everything and clear cache) But when i pressed reboot (on cwm) i got a black screen. When you hold the power button it vibrates but screen doesnt turn on, the led goes red for about 2sec and goes off. i tried holding power button and volume up but same result, vibrates and nothing comes up. Even when I make it vibrate 3 times, no result. Im desperate guys please help me i will appreciate your help greatly. And if this means anything, when i installed zip from sd card, it just said installing, and after a few minutes, said install complete. Is this normal? since it didnt show anything in between. PLEASE HELP I WILL TRY DONATE TO WHOEVER FIXES MY PROBLEM.
Click to expand...
Click to collapse
Is your bootloader unlocked?
Can you enter flash/fastboot mode?
ChikeD said:
Is your bootloader unlocked?
Can you enter flash/fastboot mode?
Click to expand...
Click to collapse
how do i enter fastboot? no matter what i try, all i get is vibrations screen doesnt light up.
someguyonearth said:
how do i enter fastboot? no matter what i try, all i get is vibrations screen doesnt light up.
Click to expand...
Click to collapse
You did not answer my first question., therefore I am not going to answer yours
ChikeD said:
You did not answer my first question., therefore I am not going to answer yours
Click to expand...
Click to collapse
Ahahaah sorry i think i forgot about them and yes bootloader unlocked
someguyonearth said:
Ahahaah sorry i think i forgot about them and yes bootloader unlocked
Click to expand...
Click to collapse
1. Open flash tool (don't click anything)
2. Turn the phone off, power + volume up until you feel (1+) 3 vibreations.
3. Press the volume up key while connecting the USB cable, led should lit blue and connected in fastboot should be in the log.
4. Repeat 2, press volume down while connectiong the USB cable for flash mode, check flashtool log
If flash mode stays connected for about 45 seconds you can simply try to flash stock with flash tool.
If fastboot stays connected over 20 seconds you can flash custom stock based kernel and flash moonwalker again, or any other custom rom you have on the phone.
If none works, just leave it turned of, charging for one day then try again.
I've seen more than one report of people that recovered XP by disconnecting the battery, though it didn't work for others.
I have flashed a custom rom first using flash tool then again flashed using stock rom, then i given that to my brother and he not used my phone for a 2months. when i heard that i take back and tried to switch ON but its not restarted and again I flashed my phone but unfortunately the file got wrong and now it is not restarting and I can't able to flash again. when i connected usb only red light blinking and not detecting by PC and frequently a white screen appearing.
No recovery, No fastboot, No flashmod.
Please help me...
Abhi_lash said:
I have flashed a custom rom first using flash tool then again flashed using stock rom, then i given that to my brother and he not used my phone for a 2months. when i heard that i take back and tried to switch ON but its not restarted and again I flashed my phone but unfortunately the file got wrong and now it is not restarting and I can't able to flash again. when i connected usb only red light blinking and not detecting by PC and frequently a white screen appearing.
No recovery, No fastboot, No flashmod.
Please help me...
Click to expand...
Click to collapse
try to connect your phone with another PC or change the usb cable
hooooossamq said:
try to connect your phone with another PC or change the usb cable
Click to expand...
Click to collapse
I tried but no change happens
Abhi_lash said:
I tried but no change happens
Click to expand...
Click to collapse
what abut the usb port thats inside the phone it self..you can easly test it by any maintenance friend with avo-meter
edit: can you enter the recovery menu?
try this...
Power off your device.
Boot in recovery mode by pressing and holding Volume Up and Power Button at the same time.
Release all buttons when the Sony Xperia neo L screen flickers and in a few seconds the Recovery screen will appear.
hooooossamq said:
what abut the usb port thats inside the phone it self..you can easly test it by any maintenance friend with avo-meter
edit: can you enter the recovery menu?
try this...
Power off your device.
Boot in recovery mode by pressing and holding Volume Up and Power Button at the same time.
Release all buttons when the Sony Xperia neo L screen flickers and in a few seconds the Recovery screen will appear.
Click to expand...
Click to collapse
idk about the usb port I will try that, but it responds when put it in charging (only red led blinking). and no recovery mode, while pressing the power button the red led blinks 3times then no more response happens, and I tried to charge it in a whole day after 2hr a light showed in the screen and it happened frequently. No more responses from phone.
Abhi_lash said:
idk about the usb port I will try that, but it responds when put it in charging (only red led blinking). and no recovery mode, while pressing the power button the red led blinks 3times then no more response happens, and I tried to charge it in a whole day after 2hr a light showed in the screen and it happened frequently. No more responses from phone.
Click to expand...
Click to collapse
try to change the battery or charge it with other phone