Wont flash RUU after relocking. - HTC Amaze 4G

My buddy handed me his Amaze to unroot and get back to stock so he could give to his mom. I used the All-in-One kit to relock the bootloader and flash the "mainver fix" and followed the instructions step by step to get back to stock but am now stuck. When I try to install the stock RUU it says the hboot version is older and asks if I want to reboot. Ok, so I tried flashing a newer version of Hboot and am now on 1.93.0002 but same outcome. Now, even worse, I can't get to recovery nor will it let me flash an img to get a recovery in place so I only have the bootloader now. It see's the IMG and loads it but doesn't ask to accept the update like it normally would. No matter what I name it, nothing loads or flashes. Whats the next step?

Have you tried using adb to flash the ruu?
Sent from my HTC_Amaze_4G using XDA Premium 4 mobile app

vgs929 said:
Have you tried using adb to flash the ruu?
Sent from my HTC_Amaze_4G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yeah I was at work and didnt have ADB setup on my comp. Went home and used ADB and was fine, thanks for the reminder!
In case anyone ever stumbles onto this issue, this is what you need to do.
Go to your ADB folder in your C drive and paste the RUU file. Name it something easy to type, in my case I changed it to " PH98IMG ". Then, open a command prompt and type EXACTLY as follows:
fastboot erase cache
fastboot oem rebootRUU
fastboot flash zip filename.zip (example: fastboot flash zip PH98IMG.zip)
When its finished:
fastboot reboot
Boom, back to stock. Only thing I can think of is make sure you have a charged battery and the phone placed somewhere to where it wont become unplugged or the battery fall out as that could easily brick your device..

Related

phone won't boot - request HELP !!!

hi all
Forgot to charge my EVO 3D (CDMA) and battery completely drained. Even after using another fully charged battery my phone goes to bootloop - just shows the HTC logo and reboots again and again. Here is what I have:
hboot : 1.5 (S-ON)
radio : 1.06.00.1216
ota : 2_17.651_5
(I am using this phone in India activated on Reliance)
As the phone doesn't boot I can't access it thru adb to give command 'adb reboot bootloader'
I can get bootloader by pressing vol_down+power
When I run the 2_17.651_5 RUU (exe) from my computer while phone is on fastboot, it completes successfully without errors. But still on reboot it just stays at the htc screen and reboots (guess it's becoz stock kernel not getting flashed as the phone is s-on)
kindly help to get back my phone boot again
thanks and regards
ananth
R.I.P
Sent from my HTC.EVO.3D.Xda Premium
Don't listen to the previous guy. Try using fastboot OEM lock and then ruuing. Or, try getting freezas stock kernel and extracting the boot.IMG and flashing it thru fastboot. Or, you could use fastboot flash recover recovery.IMG to get twrp or clockworkmod and do a superwipe and try flashing a new Rom. There are tons of options if you still have fastboot.
Sent from my HTC popout book.
jdeoxys said:
Don't listen to the previous guy. Try using fastboot OEM lock and then ruuing. Or, try getting freezas stock kernel and extracting the boot.IMG and flashing it thru fastboot. Or, you could use fastboot flash recover recovery.IMG to get twrp or clockworkmod and do a superwipe and try flashing a new Rom. There are tons of options if you still have fastboot.
Sent from my HTC popout book.
Click to expand...
Click to collapse
Thanx for responding. As I mentioned earlier,I have already relocked and RUU'd the exe file,but though it runs without errors doesn't solve problem. Again as it is s-on doesn't permit to flash boot.img. Though I am able to flash twrp recovery, not able to get into recovery from fastboot. Thanks again, really appreciate your help.
ananth001 said:
Thanx for responding. As I mentioned earlier,I have already relocked and RUU'd the exe file,but though it runs without errors doesn't solve problem. Again as it is s-on doesn't permit to flash boot.img. Though I am able to flash twrp recovery, not able to get into recovery from fastboot. Thanks again, really appreciate your help.
Click to expand...
Click to collapse
You don't need to relock once you unlock the HTC way. Just unlock the phone then flash via fastboot the boot.img and then ruu if you want.
Sent from my PG86100 using Tapatalk
megabiteg said:
You don't need to relock once you unlock the HTC way. Just unlock the phone then flash via fastboot the boot.img and then ruu if you want.
Click to expand...
Click to collapse
thanks. extracted boot.img from freeza's kernel and flashed from fastboot after unlocking. But still doesnt solve problem. Can you give me a link for boot.img
Pleassssssse HELP !!!!!!
I have the exactly the same problem, a full reboot result in boot loop, and can not fix it by now.
I guest the phone is rooted before OTA, so OTA can not flash kernel successfully because the wrong signature, and the phone will not boot because the wrong kernel.
I have tried ruu, fastboot boot recovery.img and etc, all failed.
The key point is that, the phone is rooted and you tried OTA. HTC OTA must have a stupid bug, it can not recovery from a partial update, or automatically roll back becasuse of the partial update, dem!
Please have a look at the guide/flashing notes in my signature. If u r unlocked u are likely not entering recovery correctly.
If u are trying to flash the Ruu u have to be locked or relocked. If u cant boot to android, run the xhausx's full Ruu zip from bootloader.
Sent from my PG86100 using Tapatalk
mpgrimm2 said:
Please have a look at the guide/flashing notes in my signature. If u r unlocked u are likely not entering recovery correctly.
If u are trying to flash the Ruu u have to be locked or relocked. If u cant boot to android, run the xhausx's full Ruu zip from bootloader.
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
1) flashed RUU (exe) after relocking - flash completed without errors
2) ran xhausx's full RUU zip (PG86IMG_2.17.651.5.zip) from bootloader (could get into bootloader by pressing volum_up + power button. adb cannot connect to phone (as phone does not boot), to run 'adb rebooot bootloader')
But still doesn't solve problem and phone keeps rebooting, apparently kernel has not flashed properly.
Please help !!!1
ananth001 said:
1) flashed RUU (exe) after relocking - flash completed without errors
2) ran xhausx's full RUU zip (PG86IMG_2.17.651.5.zip) from bootloader (could get into bootloader by pressing volum_up + power button. adb cannot connect to phone (as phone does not boot), to run 'adb rebooot bootloader')
But still doesn't solve problem and phone keeps rebooting, apparently kernel has not flashed properly.
Please help !!!1
Click to expand...
Click to collapse
You need to use the RUU 2.17 exe after you relock your phone... Then flash a copy of CWM or TWRP on it..
Then adb
fastboot boot recovery.img
Wipe and flash whatever you want
Just noticed u said India & carrier is reliance. Why would u be using a Sprint USA CDMA Ruu? Shouldn't u be using a GSM RUU version?
Sent from my PG86100 using Tapatalk
mpgrimm2 said:
Just noticed u said India & carrier is reliance. Why would u be using a Sprint USA CDMA Ruu? Shouldn't u be using a GSM RUU version?
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
I wonder the same thing all I saw was 1.5
Sent from my PG86100 using xda premium
mpgrimm2 said:
Just noticed u said India & carrier is reliance. Why would u be using a Sprint USA CDMA Ruu? Shouldn't u be using a GSM RUU version?
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
Reliance has both CDMA as well as GSM service in India. Mine is a Reliance CDMA MDN.
thanks and regards
reaper24 said:
You need to use the RUU 2.17 exe after you relock your phone... Then flash a copy of CWM or TWRP on it..
Then adb
fastboot boot recovery.img
Wipe and flash whatever you want
Click to expand...
Click to collapse
Yeah , as I mentioned earlier, I also tried using the RUU 2.17 exe after relocking (RUU completed successfully without errors) , and flashed twrp recovery from fastboot . But still it's a no go.
(Again would like to repeat that I can't boot into bootloader from adb - adb cannot connect as phone doesn't android boot. I get into fastboot by pressing vol_down + power)
thanks all for your responses and help, hope you all will continue guiding me till I get this done.
ananth001 said:
Yeah , as I mentioned earlier, I also tried using the RUU 2.17 exe after relocking (RUU completed successfully without errors) , and flashed twrp recovery from fastboot . But still it's a no go.
(Again would like to repeat that I can't boot into bootloader from adb - adb cannot connect as phone doesn't android boot. I get into fastboot by pressing vol_down + power)
thanks all for your responses and help, hope you all will continue guiding me till I get this done.
Click to expand...
Click to collapse
Have you tried to just run the RUU like you said boot turn debug on .... Then go to hboot flash your recovery...
Then fastboot boot recovery.img.
This should work I have unrooted my phone 3 times already in the past month Trial and Error on my part adb always found my phone...
I am tryin to figure out what is going wrong on the last part with TWRP...
Since you said after you do that it was a no go? What happend ? Adb should still be working since you just flashed the recovery...
Anyways I hope you get it solved man I am tryin to figure this problem out.
Do you have a rom already ready to be flashed on your SD card?
Problem is, since i’m not able to android boot I can't reboot bootloader from adb, as I can't connect adb without the phone normal booting. When I boot it just stays at the HTC white screen.
I have flashed twrp recovery from fastboot, but when I give command 'fastboot boot <twrpxxxxx>.img it just boots back to the HTC splash screen
You can go back to complete stock if you rename the RUU file PG86IMG.zip and load onto the root of sd card. Get into bootloader with [power+volume down] and it will automatically detect and load the zip file. This can only be done if you are relocked. I did this in order to get the latest update. After you get back to stock you can unlock and root again.
Android Cowboy said:
You can go back to complete stock if you rename the RUU file PG86IMG.zip and load onto the root of sd card. Get into bootloader with [power+volume down] and it will automatically detect and load the zip file. This can only be done if you are relocked. I did this in order to get the latest update. After you get back to stock you can unlock and root again.
Click to expand...
Click to collapse
As I mentioned in earlier post, have tried flashing PG86IMG.zip from bootloader, but still phone doesn't boot properly and is in a bootloop.
You've used the following file and done these exact steps and allowed the phone to boot to full stock OS? (assuming 2.17.651.5 is correct version)
OPTION 2 - RUU.zip info:
I prefer the .exe version but xHausx’s “FULL” PG86IMG_2.17.651.5.zip may work for you (must be renamed PG86IMG.zip). Make sure you have plenty of battery/charge left!
- (XDA) Xhausx full PG86IMG.zip RUU images (651.5 zips)
PG86IMG_2.17.651.5.zip http://forum.xda-developers.com/showpost.php?p=21593454&postcount=564
MD5: 8F82C2D8F98C077AF775266064BACB5D
From Scrosler's zip Directions : http://forums.androidcentral.com/htc-evo-3d-rooting-roms-hacks/107641-how-return-100-stock-all-versions.html
Scrosler; said:
USE ONLY FOR EMERGENCY PURPOSES. THIS OVERWRITES EVERYTHING!!!!
**THIS WILL RETURN YOU TO FRESH OUT OF THE BOX**
You will not need any special drivers loaded, etc...
1.Download the stock ROM ZIP image from here: and rename it "PG86IMG.zip"
2.Copy it to SD Card
3.Reboot phone into hboot mode by holding volume down and then press power.
Keep volume down held until you boot into hboot mode.
4.In hboot mode the phone will scan the SD card with the image. Once it finds it will ask you if you want to update. Press "Power" to update.
5.Wait.... For a while. When it gets to "system" it will loop a few times. Its quite nerve wracking actually but after about 5 or 6 times it will complete.
6.Once the entire flash is complete it will prompt you to "press power to reboot." Press power and your phone will reboot to 100% stock ROM.
Click to expand...
Click to collapse

[q] help!!!!!! Bricked e3d recovery jacked up stuck in bootloader!!!

For people who came for an answer, here it is.
download android sdk
download fastboot drivers
get clockworkmod img and rename to imgfile.img
put img in adb tools
put adb, adbwinapi, fastboot, and the img file in c:/Android
plug your phone to the computer
enter the bootloader
click on recovery or fastboot doesnt matter since both will now take you to fastboot
goto computer
type in run in start menu
type cmd in run and hit enter
type cd c:\Android
type fastboot boot imgfile.img
you are now in recovery
go to mounts and storage and mount your device as a disk drive
download any rom to your computer doesnt really matter and put in on your sdcard. If you already have a rom on there then just use that.
unmount your phone
go to wipe data/factory reset and when it finishes flash the rom
once rom is done flashing reboot into android again.
your phone is partially fixed
now go to the market (if you flashed cm then flash the gapps.zip) and download "rom manager"
Then click on download clockworkmod 5.0.0.2 or something like that (first option)
Now go to rom manager and restore your backup that u made (If there was 1 before)
now it will be fixed and your bootloader will take u to recovery instead of fastboot when you click recovery xD
thanks xda
I flashed a rom and the rom must have been corrupted or something and now my phone is stuck rebooting and when I try to go to recovery or any option it takes me to fastboot so now my phone is basically bricked
Your phone is not bricked since your still able to turn it on.
Can you enter fasboot USB?
Send from my Evo 3D using Tapatalk
well it doesnt really turn on its a boot loop but whatever and fastboot is weird it doesnt want to work.
If your bootloader is unlocked make sure you flash the boot.img through fastboot and make sure you wipe
Sent from my ADR6425LVW using XDA
fastboot doesnt work I already tried too flash it
Guys please help!!!!!!!!!!!!!!!!!!
What do you mean by fastboot is wierd. Did you pull the battery?
fastboot doent work cmd always says waiting for device
if i click recovery it takes me to fastboot, btw.
Have you tried an ruu?
anobahar said:
fastboot doent work cmd always says waiting for device
Click to expand...
Click to collapse
Do you have the proper drivers installed
Sent from my ADR6425LVW using XDA
Are you S-Off or S-On? If S-Off, download a PG86IMG.zip of a recovery, and use your bootloader to flash recovery. From that point, just restore a backup or reflash a ROM. If you're not S-Off, I'd say you should try running an RUU, since you can't get fastboot to work. But I think you need to relock your device to run an RUU (if you're S on/ HTC Unlocked), so you'd still need fastboot. Do you have a different USB cable to try? I've seen them fail before even though they still work to charge.
k2buckley said:
Are you S-Off or S-On? If S-Off, download a PG86IMG.zip of a recovery, and use your bootloader to flash recovery. From that point, just restore a backup or reflash a ROM. If you're not S-Off, I'd say you should try running an RUU, since you can't get fastboot to work. But I think you need to relock your device to run an RUU (if you're S on/ HTC Unlocked), so you'd still need fastboot. Do you have a different USB cable to try? I've seen them fail before even though they still work to charge.
Click to expand...
Click to collapse
Sounds like the drivers arn't installed right.. Like you said if he is S-ON and relocked he can run a RUU exe if he is CDMA...
If you are s off then you just need to reload another recovery. And then access a backup of a rom! Or just flash a new one. I had a issue just like this yesterday where my recovery was broken for some reason and had to go from twrp. 2.1 back to 1.1.1 and load another rom.
Sent from my PG86100 using xda premium
Well i put the sdcard in a bberry but a pg6img.img in my sdcard but bootloader doesnt do anything
I am cdma, s-off unlocked with revolutionary kernel 1.4
oops not kernel hboot
Ok, fail, i dont think i hav fastboot drivers downloading now
now cmd is stuck on "sending recovery"
Did you place a copy of the img into your fast boot folder and one in your adb tools folder ???
#Root-Hack_Mod*Always\

Installing ROM s-on newbie question

Have to ask this as I'm completely new to android and installing new ROM's...
The instructions for a certain rom say: Reboot to bootloader to flash PH98IMG.zip if you were identified as S-ON.
Does this mean to let the bootloader preform the "update" it's found? Because it seems to do this automatically when I get into the bootloader....
thanks for helping!
nissmo66 said:
Have to ask this as I'm completely new to android and installing new ROM's...
The instructions for a certain rom say: Reboot to bootloader to flash PH98IMG.zip if you were identified as S-ON.
Does this mean to let the bootloader preform the "update" it's found? Because it seems to do this automatically when I get into the bootloader....
thanks for helping!
Click to expand...
Click to collapse
I have never flashed a rom by flashing the PH98IMG.zip because for some reason it hasn't worked for me, maybe i just did something wrong.
What I do instead is extract the rom .zip on your computer. Then, put the boot.img file into the platform-tools folder in the android sdk (assuming you already have the android sdk installed). Then, flash the rom, then power the phone off, then press and hold power+volume down to boot into hboot. From there you select fastboot. At the top you should see fastboot usb in the red box. Then, type into command prompt or terminal (for mac) fastboot flash boot boot.img After that, just reboot and the new rom should boot just fine.
Idk if you have a mac, but this is the tutorial I used to download and set up the adb with my macbook. Its very easy, if you have windows, im sure you could google instructions.
When you put the ROM on your sd card, extract the boot.img and put it in a ph98img.zip file. Install ROM, go to bootloader and it should ask you it update. Update and you're good to go. Keep in mind I don't like using command prompts
Sent from my ADR6425LVW using xda app-developers app
jmez900 said:
When you put the ROM on your sd card, extract the boot.img and put it in a ph98img.zip file. Install ROM, go to bootloader and it should ask you it update. Update and you're good to go. Keep in mind I don't like using command prompts
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
To add onto that, depending on how you get to the bootloader, it may boot into fastboot initially. If so, just hit the power button on the BOOTLOADER option and it will do the rest.
I've read that the only way to flash a kernel with s-on from fastboot is you have to use adb. I guess when you reboot the bootloader from adb you gain access to the recovery partition but if your s-on just booting into the recovery doesn't work. I've decided to stay s-on (personal preference) and flashed multiple kernels with the zip. But back to your question is yes let the update go through and the kernel should be installed.
Sent from my SCH-I815 using XDA Premium HD app
Thanks all!
Sent from my Nexus 10 using xda app-developers app

Stuck at 4G LTE screen after zip update

I was on 4.0.3 and I flashed the zip through AromRa recovery.
Now, when booting up, its stuck at the 4G screen.
The update was the OTA update released to update radios to Global. THIS
It didn't gave any error at all, it said "Reboot to complete installation or update". But when I clicked the reboot option, I saw a line saying something like "Can't write....." then the screen went off and it rebooted. This line was not there, or atleast not visible before I clicked the reboot option.
I am new to rezound and android, so please let me know what I can do. I wasn't able to get a nandroid backup before doing this, had no ext. SD card.
All I did before flashing the zip was flashing the custom recovery. Nothing else. No SU or anything else.
Can I RUU 4.0.3 to fix this problem?
Yes you need to ruu to get it back. I'm assuming your s on. You need to be s off in order to flash radios by themselves.
Sent from my ADR6425LVW using xda app-developers app
Yes, I am s-on and not rooted.
Is there any specific RUU that I should go to? I was thinking of using 4.03.605.2
Thanks
lamborg said:
Yes, I am s-on and not rooted.
Is there any specific RUU that I should go to? I was thinking of using 4.03.605.2
Thanks
Click to expand...
Click to collapse
Yes, that's the latest global RUU.
You need to relock to run it:
fastboot oem lock
Put it on your sd card and it should do it's thing when you reboot. Run it a couple times and make sure it's finished so it will get all the system files. I believe it reboots you once it's done.
Then you can unlock again, flash recovery and root. If you have trouble rooting again search this forum for "super su" and you'll find a version you can flash to gain root.
feralicious said:
Yes, that's the latest global RUU.
You need to relock to run it:
fastboot oem lock
Put it on your sd card and it should do it's thing when you reboot. Run it a couple times and make sure it's finished so it will get all the system files. I believe it reboots you once it's done.
Then you can unlock again, flash recovery and root. If you have trouble rooting again search this forum for "super su" and you'll find a version you can flash to gain root.
Click to expand...
Click to collapse
I relocked but then tried flashing the zip twice.
Here's what comes in cmd:
sending....
OKAY
writing
<bootloader>adopting sig ....
<bootloader>checking sig
failed <remote: not allowed>
finished
After rebooting, it gets stuck on the white HTC screen.
sounds like a bad download, go back to android police and try to get the mirror from Illinois, it worked for me a couple of weeks ago after having the same issue as you.
sent from my rooted SAMSUNG GALAXY NOTE 2...
mike7728 said:
sounds like a bad download, go back to android police and try to get the mirror from Illinois, it worked for me a couple of weeks ago after having the same issue as you.
sent from my rooted SAMSUNG GALAXY NOTE 2...
Click to expand...
Click to collapse
Thanks mike.
I downloaded the same RUU from a different source and flashed it. But the same failed remote not allowed error.
1 question.
In adb, do I need to type the command fastboot flash zip PH98IMG.zip in the hboot (with otions fastboot, recovery, clear storage, simlock, image crc) or after selecting the fastboot option at the hboot screen?
I am asking because nothing happens when I put the command while on the hboot screen and I get the remote error when commanded from the fastboot screen.
lamborg said:
Thanks mike.
I downloaded the same RUU from a different source and flashed it. But the same failed remote not allowed error.
1 question.
In adb, do I need to type the command fastboot flash zip PH98IMG.zip in the hboot (with otions fastboot, recovery, clear storage, simlock, image crc) or after selecting the fastboot option at the hboot screen?
I am asking because nothing happens when I put the command while on the hboot screen and I get the remote error when commanded from the fastboot screen.
Click to expand...
Click to collapse
You have to fastboot oem rebootRUU first
then fastboot flash zip PH98IMG.zip
you may have to flash the zip twice.
Code:
androidforums.com/incredible-all-things-root/487280-easier-way-flash-pb31img-files.html
(I can't link yet)
lamborg said:
Thanks mike.
I downloaded the same RUU from a different source and flashed it. But the same failed remote not allowed error.
1 question.
In adb, do I need to type the command fastboot flash zip PH98IMG.zip in the hboot (with otions fastboot, recovery, clear storage, simlock, image crc) or after selecting the fastboot option at the hboot screen?
I am asking because nothing happens when I put the command while on the hboot screen and I get the remote error when commanded from the fastboot screen.
Click to expand...
Click to collapse
You don't flash this in fastboot since it's a zip file.
EDIT: Looks like you can flash in fastboot as mentioned in the above post. Cool, I like that. I would flash it twice as I've read several times that you need to to make sure it gets all the system files.
If htat doesn't work for whatever reason, just put it on the sd card of your phone, detach your phone from your pc and reboot. hboot should find it (it looks for the PH98IMG.zip file) and flash it. Flash it twice to be sure it gets all the system files.
When it's done and you're rebooted use a file explorer and delete the PH98IMG file so it doesn't flash again on the next reboot.

[Q] cant get into recovery after relocking EVOLTE

Ok So....
I was S-On cause i have 64bit Win7. I was going to return LTE for Upgrade to ONE. So i used this to get back to stock. $250 is too much for me right now to upgrade so i'll be keeping my LTE for a couple more months. At least to see whats up with the Mega. Anyways I went back to reroot but im havent been able to get to recovery. I have all my root files (HTC Dev Unlock token) I can Unlock and relock Boot loader. This is where I'm at... See photo 1.
*** UNLOCKED *** ( I Noticed it no longer says "Tampered" across the top. Does that make a diference?)
S-On
HBoot 2.09
Radio 1.12.11.1119
I used the JB OTA firmware from unlimited.io/jewel.htm
I have tried to reflash TWRP 2.4.1.0 But I can't access Recovery. Second photo shows error icon when rebooting to recovery from Boot Loader. I tried re flashing SU, even stock_EVO4gLTE_recovery.img though i dont think that last one would work cause im now on updated firmware.
Am i just SOL and can no longer access recovery?
Will Dirty Racoon help me get recovery back?. Im just now getting familiar to fastboot. Linux is a bit intimidating.
HBoot Pic - https://lh3.googleusercontent.com/-...AAFm0/_gjzRfxXTcA/w815-h611-no/Picture+26.jpg
Recovery Error Pic - https://lh6.googleusercontent.com/-...AAFnE/wyW4K6OEM3o/w816-h612-no/Picture+27.jpg
Put the phone back n bootloader like the 1st pic.
Then select Fastboot
Then connect phone to Pc
Then the Bootloader should show Fastboot USB.
Now open up the folder on your Pc that has Fastboot then open a command Window and type fastboot flash recovery what ever the recovery image name is.
Sent from my EVO using xda premium
Follow this guide made by bigdaddy619 and you should be s-on/unlocked and Rooted then flash your Preferred ROM
http://forum.xda-developers.com/showthread.php?t=2026938
scoot0073 said:
Put the phone back n bootloader like the 1st pic.
Then select Fastboot
Then connect phone to Pc
Then the Bootloader should show Fastboot USB.
Now open up the folder on your Pc that has Fastboot then open a command Window and type fastboot flash recovery what ever the recovery image name is.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
I tried flashing recovery 3 times no go.
wait in the OG root zip there are 2 images that say recovery. A "stock_EVO4GLTE_recovery.img" and I also have
"openrecovery-twrp-2.4.1.0-jewel.img"
Im gona try Bgdaddys' guide...
will report back tomorrow.
Thanx for the replies.
Artanis said:
I tried flashing recovery 3 times no go.
wait in the OG root zip there are 2 images that say recovery. A "stock_EVO4GLTE_recovery.img" and I also have
"openrecovery-twrp-2.4.1.0-jewel.img"
Im gona try Bgdaddys' guide...
will report back tomorrow.
Thanx for the replies.
Click to expand...
Click to collapse
Put your phone in fastboot usb then type in terminal/cmd
fastboot flash recovery openrecovery-twrp-2.4.1.0-jewel.img
Then hit enter and it should transfer/flash/install
Then do fastboot reboot-bootloader
Then go into recovery and you should have twrp installed...
Sent from my EVO using xda app-developers app
jocarog said:
Put your phone in fastboot usb then type in terminal/cmd
fastboot flash recovery openrecovery-twrp-2.4.1.0-jewel.img
Then hit enter and it should transfer/flash/install
Then do fastboot reboot-bootloader
Then go into recovery and you should have twrp installed...
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
You guys rock IDK why it didn't work before. but I just flashed TWRP 2.5 and it worked like a ice cold Boones on a 15 year old cheerleader.
Thanks again.

Categories

Resources