AT&T 3.17.502.3 Stock Rooted ROM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features
100% Stock (no mods or edits other than rooting)
Rooted with SuperSU
Odex and Deodex
Busybox
Zip aligned
init.d support
Thanks! to @cschmitt for sharing the decrypted RUU and firmware here.
Thanks! to @scrosler for teaching me what I know and helping with all this.
Thanks! to Chainfire for SuperSU.
Thanks! to DSIXDA for the kitchen.
Downloads
ODEX - http://d-h.st/Wum
DEODEX - http://d-h.st/qjb
Sharing Policy
The spirit of Open Source is to share your knowledge and files with the rest of the world so they can improve on what you do when possible. This is also my philosophy and I would never compromise that!
You are free to use this ROM or any part of this ROM any way you like as long as you give proper credits!
Do not use my work if you cannot give proper credits!
Consider this your permission! Please do not PM me asking if its OK to build off this ROM. Permission granted!
Good job man!
Deodex is up now! I'm out for the night, enjoy guys!
Att pushed a different radio during ota. I'm wondering what else is different from the ruu htc supplied?
Sent from my HTC One using Tapatalk 4
dark2099 said:
Deodex is up now! I'm out for the night, enjoy guys!
Click to expand...
Click to collapse
Thanks a lot dark! You work is much appreciated!
Sent from my HTC One using xda app-developers app
Apologize for the stupid question. If I install this rom, would it update the firmware and radio or do I have to do those seperately?
Sent from my HTC One using xda app-developers app
stedean said:
Apologize for the stupid question. If I install this rom, would it update the firmware and radio or do I have to do those seperately?
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
That has to be done separately.
Super excited to flash this rom, been waiting for the official ATT 4.3 rom. Tried some of the other 4.3 roms, but battery life seems to be hit and miss. I always had good battery life with STOCK att roms and hoping this the no different.
Thanks
Sent from my HTC One using xda app-developers app
system r/w?
Quick question OP, I have the ota.zip, but I cannot open or extract. Does it need to be decrypted?
godfirst said:
Quick question OP, I have the ota.zip, but I cannot open or extract. Does it need to be decrypted?
Click to expand...
Click to collapse
I used cschmitt's decrypted RUU, didn't do it myself. I'll talk to someone who might though and get back to you.
dark2099 said:
I used cschmitt's decrypted RUU, didn't do it myself. I'll talk to someone who might though and get back to you.
Click to expand...
Click to collapse
Thanks for your help. I've already given a link to the otapkg.zip I got from the ota to cschmitt.
godfirst said:
Quick question OP, I have the ota.zip, but I cannot open or extract. Does it need to be decrypted?
Click to expand...
Click to collapse
put the ruu(ota zip) in whatever folder in c: that you have fastboot /adb drivers in. first rename to just RUU(makes it alot easier) reboot to fastboot follow this exactly. its not flashable and must be install through fastboot.
for me it looks just like this..........
cd/android
fastboot oem rebootRUU
fastboot flash zip RUU.zip
fastboot reboot
do not pull usb or enter fastboot reboot if you dont see success at bottom after install in cmd... it will fail the first time you will see (flush image again) re-enter flash zip command and it will install.
Th3ArchAngel said:
put the ruu(ota zip) in whatever folder in c: that you have fastboot /adb drivers in. first rename to just RUU(makes it alot easier) reboot to fastboot follow this exactly. its not flashable and must be install through fastboot.
for me it looks just like this..........
cd/android
fastboot oem rebootRUU
fastboot flash zip RUU.zip
fastboot reboot
do not pull usb or enter fastboot reboot if you dont see success at bottom after install in cmd... it will fail the first time you will see (flush image again) re-enter flash zip command and it will install.
Click to expand...
Click to collapse
I've already installed the ota twice. The issue I' m having is actually opening the update zip to extract of see the contents.
godfirst said:
I've already installed the ota twice. The issue I' m having is actually opening the update zip to extract of see the contents.
Click to expand...
Click to collapse
Oh...I get ya. Yeah I opened it on ubuntu,but didn't try on windows. I'll check back and see if you got it. If not I can extract and move to unsecured zip,and give you a link a little later today. About an hour.
Sent from my HTC One using Tapatalk 2
Th3ArchAngel said:
Oh...I get ya. Yeah I opened it on ubuntu,but didn't try on windows. I'll check back and see if you got it. If not I can extract and move to unsecured zip,and give you a link a little later today. About an hour.
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
Sounds good, I tried on PC and Mac to no avail. You can PM me when you get it going. Also the file you have is 597mb right? That's the size of the OTA zip I got from /cache/fota.
godfirst said:
Sounds good, I tried on PC and Mac to no avail. You can PM me when you get it going. Also the file you have is 597mb right? That's the size of the OTA zip I got from /cache/fota.
Click to expand...
Click to collapse
I'm not home right now so I'm not sure about the size. But I got it from the link op posted,that takes you to decrypted zip extracted from cschmitt. I'll pm you link.
Sent from my HTC One using Tapatalk 2
Th3ArchAngel said:
I'm not home right now so I'm not sure about the size. But I got it from the link op posted,that takes you to decrypted zip extracted from cschmitt. I'll pm you link.
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
I've already pulled the firmware from that one. I'm talking about the OTA ATT pushed. I believe it's different then the RUU provided by HTC! We'll talk more later. Not trying to stir thread in wrong direction.
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The STOCK stock rom
I am releasing stock updates for unlocked users. The rom is in blob format instead of the extracted files of a rom. It can also be flashed with CWM however it is still a blob so it may take longer to flash. One of the best features of this rom is that just like stock updates it doesn't remove your apps. All apps will be optimized after install!!!
As with everything everywhere I provide no warrenty and am not responsible for anything that you do!!! I cannot guarentee that this wont fry your tablet but I will say that it shouldn't.
Note: by deffault this rom is not rooted but can be by flashing a root zip in recovery or by downloading the rooted version
Now with a ROOTED version check post 2 for links.
To add root flash the following file via CWM after the rom install is complete!
http://goo-inside.me/superuser/Superuser-3.0.7-efghi-signed.zip
To flash the blob:
Code:
adb push blobfile /sdcard/
Code:
adb shell
su
dd if=/sdcard/blobfile of=/dev/block/mmcblk0p4
reboot
Note: This can be done from a rooted rom as root (#) or from CWM recovery.
Pictures and changelog currently not necessary as this should be identical to stock.
Issues:
None, please post if you find some!
How to DOWNLOAD:
Go to post 2 and click on the download link for desired rom.
To Do:
Get user feedback
Get people to press the THANKS button --->
Thanks to Rukas on irc for giving me the push to make this rom and cky2k on irc for testing
Download links:
Note: If you want to use the blob method you can extract the blobfile from the CWM zip file.
9.4.2.21 CWM compatible signed US version
http://d-h.st/ODi
ROOTED 9.4.2.21 CWM compatible signed US version
http://d-h.st/r44
9.4.2.21 CWM compatible signed WW version
http://d-h.st/ViD
ROOTED 9.4.2.21 CWM compatible signed WW version
http://d-h.st/KH8
ENJOY!!!
Download for US stock 9.4.2.21 kernel only
http://d-h.st/g7E
Download for WW stock 9.4.2.21 kernel only
http://d-h.st/nmg
Thank you for your ROM... Hope keep your work when new releases are out....
Enviado desde mi GT-I9100 usando Tapatalk
Appreciate this. Needed straight complete stock.
Is there a way to have root with this rom?
Sent from my Transformer Prime TF201 using Tapatalk
jrac86 said:
Is there a way to have root with this rom?
Sent from my Transformer Prime TF201 using Tapatalk
Click to expand...
Click to collapse
yes after the rom has completed flashing and you rebooted and the blue bar has finished, then reboot into CWM and flash the root zip. That should give you root. The zip is located in the First post.
l33tlinuxh4x0r said:
yes after the rom has completed flashing and you rebooted and the blue bar has finished, then reboot into CWM and flash the root zip. That should give you root. The zip is located in the First post.
Click to expand...
Click to collapse
No need to reboot, flash directly su.zip after flashing ROM.
I think you include root in the ROM,
everybody will want it.
Striatum_bdr said:
No need to reboot, flash directly su.zip after flashing ROM.
I think you include root in the ROM,
everybody will want it.
Click to expand...
Click to collapse
are you saying that the root zip will work before the blob is flashed(blue bar)?
Also I may make a rooted version if what you are saying is true I could just merge the two zip files (rom and su) and be good to go.
l33tlinuxh4x0r said:
are you saying that the root zip will work before the blob is flashed(blue bar)?
Also I may make a rooted version if what you are saying is true I could just merge the two zip files (rom and su) and be good to go.
Click to expand...
Click to collapse
Hum didn't take notice that you used blob file to install..... Usually we use classic zip archive in cwm, more simple to handle, and blob only for kernel as it can't be flashed by another way.
So perhaps itwould be more simple to add Super User.apk and su binary in blob.
Striatum_bdr said:
Hum didn't take notice that you used blob file to install..... Usually we use classic zip archive in cwm, more simple to handle, and blob only for kernel as it can't be flashed by another way.
So perhaps itwould be more simple to add Super User.apk and su binary in blob.
Click to expand...
Click to collapse
Yeah I can add it to the blob. However I am still debating on doing it and if I should add the superuser apk or just have users download it from market.
Thanks for the input btw.
l33tlinuxh4x0r said:
Yeah I can add it to the blob. However I am still debating on doing it and if I should add the superuser apk or just have users download it from market.
Thanks for the input btw.
Click to expand...
Click to collapse
It depends on your faith to think people will do this by themselves without flooding the thread with 'How do I root' questions...
Thank you, exactly what I was looking for.
Quick question, since these are technically stock updates, do we need to wipe anything before flashing? Im thinking no but wanted to be sure. Thanks in advance for any help
Sent from my Kindle Fire using Tapatalk
teng247 said:
Quick question, since these are technically stock updates, do we need to wipe anything before flashing? Im thinking no but wanted to be sure. Thanks in advance for any help
Sent from my Kindle Fire using Tapatalk
Click to expand...
Click to collapse
I am thinking that you are correct. However if you run into problems do a wipe and install again.
Just flashed this and all went smooth glad to be back on stock, needed it for some kernel testing thanks!
Hi !
Can i really flash this rom on my unlocked Prime ???
With fastboot ??? (impossible to use adb "No device found""
Thanks
podezebi said:
Hi !
Can i really flash this rom on my unlocked Prime ???
With fastboot ??? (impossible to use adb "No device found""
Thanks
Click to expand...
Click to collapse
First: impossible on unlocked devices.
Two: why would you gain ? It's the exact copy of stock .21 that you have with OTA update....
Striatum_bdr said:
First: impossible on unlocked devices.
Two: why would you gain ? It's the exact copy of stock .21 that you have with OTA update....
Click to expand...
Click to collapse
it's a long story !
I try to flash AOKP rom. But i didn't have the right CWM.
So my prime didn't start !
i've just flash the 5.8.2.0 with fastboot, but now it says "no files found" when i try to flash a .zip file...
i don't know what can i do !
thanx for the answer
Can anyone confirm if you need a wipe?
Sent from my Galaxy Nexus using Tapatalk
Disclaimer : If this bricks your phone please dont sue me rather try some altenatives to fix it back up. We're all here to help.:angel: :laugh:
This is a port of the famous iOS ripoff better known as JOY OS.
Based on CM7 sources this was ported directly from the V880 rom. Can be found here : Joy OS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The rom offers CM7 goodness with eye candy GUI and heavy customization features including a unique Task
Switcher animated Notifications and lots more.
Based on Cybiks CM7.2
Click to expand...
Click to collapse
You Will Need :
An unlocked Photon
A custom recovery installed (TWRP recommended)
Click to expand...
Click to collapse
How To :
Enter Custom recovery
Wipe Data , Cache , Dalvik (If already on latest CM7 nightlies you may not have to wipe Data)
Install MOJO.v1.02.zip
Click to expand...
Click to collapse
Reboot System
BUGS :
Whatever CM7 offers
MOARR Screenshots
Credits
Th3Bill for his Priceless Advice. Thanks man!
Cybik for blessing us with Cm7.
Chinese Dudes for this rom. :silly:
XDA
Did I forget anyone!?... Oh right! You Guys
Click to expand...
Click to collapse
Lets pissoff some iphone users! lol
Download MOJO.v1.02 03082012
GSM : MOJOv1.02
CDMA : WIP
Download : MOJO v1.02 01082012
Click to expand...
Click to collapse
80.5mb
build 01082012 is borked and wont boot Cant seem to workaround a fix So will be re-uploading a working rom again. Although those who have already downloaded can do this :
Open MOJOv1.02 in 7zip
Goto /system/etc/init.d and delete file "75-pcm"
Goto /system/xbin and delete file "pcm"
Now close and save the updated archive and Flash the rom again, it should boot.
Click to expand...
Click to collapse
NOTE : This rom was built and tested on a GSM configured device.
Features : v1.02
1.Completely themed iOS UI.
2.Support for CM7 themes.
3.Unique iOS task switcher.
4.Animated iOS like notifications.
5.RAM tweaks for better app management.
6.CPU tweaks for optimised usage of both cores.
7.Native iOS lockscreen.
8.Lots more
Your Feedback is important to us!
where is link for the rom???
hi ryan where is the link for the rom.
Patience my friend. Forgot to edit some stuff ,now re-upping. It'll be up in a few. Apologies!
Sent from my MB855 using Tapatalk 2
ryan8r said:
Patience my friend. Forgot to edit some stuff ,now re-upping. It'll be up in a few. Apologies!
Sent from my MB855 using Tapatalk 2
Click to expand...
Click to collapse
Tried installing this. But stuck in bootloop
Did Wipe Data , Cache , Dalvik but still no luck
Anyone else with got it working. I am using the photon in India with CDMA.
k2wl said:
hi ryan where is the link for the rom.
Click to expand...
Click to collapse
All good things come to those who wait. He's putting in a lot of hard work, so just be patient.
---------- Post added at 09:53 AM ---------- Previous post was at 09:51 AM ----------
By the way...looks REALLY NICE! Glad to see another person stepping up to bring another great option to the Photon
Akhileshjj said:
Tried installing this. But stuck in bootloop
Did Wipe Data , Cache , Dalvik but still no luck
Anyone else with got it working. I am using the photon in India with CDMA.
Click to expand...
Click to collapse
What recovery are you using? I'd suggest using TWRP. Also flash twice just to be sure.
Sent from my MB855 using Tapatalk 2
ryan8r said:
What recovery are you using? I'd suggest using TWRP. Also flash twice just to be sure.
Sent from my MB855 using Tapatalk 2
Click to expand...
Click to collapse
I would have to agree with this...the one I would absolutely avoid at the moment as it's not fully stable is Joker V4. I use V3 for everything, and Joker's my boy....V4 just has some bugs that make things flash funny...
Also, with some recoveries, it seems not everything flashes the first time around, so the flash twice does seem to work well to make sure it fully copies everything over.
If it still doesn't boot, get Ryan or I an adb logcat of your boot, and we can work to get you a resolution to your issue
Sorry if I'm stepping on your toes ryan....totally not my intention...just figure I'll offer to help if I can...not to mention, people need to know to give proper feedback, which in the case of a NON-boot situation includes an adb logcat of the phone attempting to boot up
If anyone doesn't know how to do an adb logcat, here's the procedure:
1) Download android-sdk for your OS
2) Extract the archive file
3) go to /android-sdk/tools folder and double click android
4) Be sure to download platform-tools at the very least
5) Turn your phone off
6) Plug into PC
7) Open a command prompt (for Win) C:\(path to your sdk folder)\platform-tools\adb logcat -C (for Linux) navigate to your platform-tools folder, open Terminal and type in: sudo ./adb kill-server (press enter), then: sudo ./adb start-server (press enter), then: ./adb logcat -C
8) Press Enter (it should say "waiting for device")
9) Power up your phone
10) When you get to the point where the boot fails, hit Ctrl and Z (this will stop the logcat process)
11) Copy this output to a txt file or Pastebin site and copy us a link
No probs man! Two heads better than one. lol Feel at home.
Though I am pretty confused why it wont boot up on a CDMA device as I've got it running completely stable on my GSM photon.
Agree, a logcat would be helpful!
Sent from my MB855 using Tapatalk 2
Thanks for the details man,
i used jokers V3 recovery. Flashed thrice but no use.
I followed your procedure to get logcat but no luck...
my command prompt still says waiting for device when my photon is trying to boot.
To be doubly sure on the file that i downloaded was having no issues just downloading the file again.let me see...
Akhileshjj said:
Thanks for the details man,
i used jokers V3 recovery. Flashed thrice but no use.
I followed your procedure to get logcat but no luck...
my command prompt still says waiting for device when my photon is trying to boot.
Click to expand...
Click to collapse
What rom were you on previously?
Are you able to boot Cybiks CM7.
Try wiping system aswell.
Did you edit your build.prop as mentioned in the OP?
Sent from my MB855 using Tapatalk 2
Akhileshjj said:
Thanks for the details man,
i used jokers V3 recovery. Flashed thrice but no use.
I followed your procedure to get logcat but no luck...
my command prompt still says waiting for device when my photon is trying to boot.
To be doubly sure on the file that i downloaded was having no issues just downloading the file again.let me see...
Click to expand...
Click to collapse
Ryan...I'll give you some lines to add to the build.prop that will let adb log cat pull from a PC in a min once my PC boots up
Sent from my MB855 using xda premium
Oh Fudge! I have figured it out. It seems one of the cpu scripts I had placed in the rom is borking the boootup process. I will upload a fix in a few after I run a couple of more tests. Dearest apologies for the trouble it may have caused.
Edit : Cant seem to workaround a fix So will be re-uploading a working rom again. Although those who have already downloaded can do this :
Open MOJOv1.02 in 7zip
Goto /system/etc/init.d and delete file "75-pcm"
Goto /system/xbin and delete file "pcm"
Now close and save the updated archive and Flash the rom again, it should boot.
ryan...put this into your build.props. It will enable adb logcat debugging
# ADB Debugging
ro.debuggable=1
persist.service.adb.enable=1
This Rom Have Radio?
I gave it a try and it boots up but I get an immediate com.android.phone FC at the setup screen so I can't go any further. I've changed the ro.telophony to a 7 already.
Lancerz said:
I gave it a try and it boots up but I get an immediate com.android.phone FC at the setup screen so I can't go any further. I've changed the ro.telophony to a 7 already.
Click to expand...
Click to collapse
CDMA or GSM? Can you upload a logcat of the error?
Sent from my MB855 using Tapatalk 2
ROCKMAN33 said:
This Rom Have Radio?
Click to expand...
Click to collapse
Not now. Maybe in a future build.
Sent from my MB855 using Tapatalk 2
ryan8r said:
CDMA or GSM? Can you upload a logcat of the error?
Sent from my MB855 using Tapatalk 2
Click to expand...
Click to collapse
CDMA but I'm out and about now.
Lancerz said:
CDMA but I'm out and about now.
Click to expand...
Click to collapse
sure whenever you can.
This is the new update (post ICS) which adds Global Phone capabilities to the Rezound posted by MicroMod777 Sunday night.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have deodexed it, rooted it, added busybox, and packaged it up.
You MUST be on the ICS OTA firmware before applying this one.
It will not work without the firmware update that goes with it.
And while this is an update, you need to wipe everything before installing it.
Dev-Host: ICS Global Phone Update
Goo.im: ICS Global Phone Update
MD5: 0a19f571600007a81fcbc1cb731cb257
Dev-Host: ICS Global Phone Update Firmware
Goo.im: ICS Global Phone Update Firmware
MD5: 2a347e8bcac6a41489db899afbb19651
Enjoy!
D
.
To install:
1. Put both files on the SDCard.
2. Rename the firmware to PH98IMG.zip
3. Reboot to recovery.
4. Backup.
5. Wipe.
6. Install the ROM. Do not reboot from recovery.
7. From a command prompt issue "adb reboot bootloader"
8. Tap Power to go to HBOOT and load the firmware.
9. Tap Vol Up to start.
10 Tap Power to reboot.
11. Profit!
D
.
Thanks big guy its very much appreciated.
zone23 said:
Thanks big guy its very much appreciated.
Click to expand...
Click to collapse
I am just big boned damnit!
dsb9938 said:
To install:
1. Put both files on the SDCard.
2. Rename the firmware to PH98IMG.zip
3. Reboot to recovery.
4. Backup.
5. Wipe.
6. Install the ROM. Do not reboot from recovery.
7. From a command prompt issue "adb reboot bootloader"
8. Tap Power to go to HBOOT and load the firmware.
9. Tap Vol Up to start.
10 Tap Power to reboot.
11. Profit!
D
.
Click to expand...
Click to collapse
Confused on #7. I use a mac, and not fluent in adb commands in terminal on a mac. Is this a step from a computer, or can the prompt be done in Recovery?
318sugarhill said:
Confused on #7. I use a mac, and not fluent in adb commands in terminal on a mac. Is this a step from a computer, or can the prompt be done in Recovery?
Click to expand...
Click to collapse
The commands are the some in both Windows and OSX. In other words adb is adb.
Any thoughts on whether it will be possible to flash pre-OTA ROMs over the new firmware? (I did see on another thread someone encountering the mainver issue again, so I suppose we'll have to reset mainver if we do that).
318sugarhill said:
Confused on #7. I use a mac, and not fluent in adb commands in terminal on a mac. Is this a step from a computer, or can the prompt be done in Recovery?
Click to expand...
Click to collapse
Yes, it's done from a computer.
D
.
hgoldner said:
Any thoughts on whether it will be possible to flash pre-OTA ROMs over the new firmware? (I did see on another thread someone encountering the mainver issue again, so I suppose we'll have to reset mainver if we do that).
Click to expand...
Click to collapse
I am S-Off, I cannot speak for S-On, nobody should still be S-On.
I can tell you that I did restore my ICS OTA backup and it's running fine.
D
.
hgoldner said:
Any thoughts on whether it will be possible to flash pre-OTA ROMs over the new firmware? (I did see on another thread someone encountering the mainver issue again, so I suppose we'll have to reset mainver if we do that).
Click to expand...
Click to collapse
It appears you are S-off, so mainver won't be an issue for you.
I am running Cubed 1.0.2 on the new firmware right now without any issue. I flashed the firmware last night just to check it out. And was waiting for someone like dsb to get this to use to play with
First of all a big thanks for this, it was time.
Still that anoying warning in the lockscreeen, it would be great if there was a way of removing it.
Great job.
fazbarulho said:
First of all a big thanks for this, it was time.
Still that anoying warning in the lockscreeen, it would be great if there was a way of removing it.
Great job.
Click to expand...
Click to collapse
What annoying warning? This is an HTC update, not a home made one. There shouldn't be anything hokey with it.
If you switch to some other mode, it probably wants the right kind of SIM for that mode. Assuming that's what you mean.
D
.
DSB can we just flash the firmware and then restore our ROM? I am on ViperRez, just want to make sure if I have to install the ROM along with the Firmware or if I can just update the Firmware by itself.
Thanks,
king.james said:
DSB can we just flash the firmware and then restore our ROM? I am on ViperRez, just want to make sure if I have to install the ROM along with the Firmware or if I can just update the Firmware by itself.
Thanks,
Click to expand...
Click to collapse
Far as I know. I'm running the new firmware with the ICS OTA ROM I made.
I won't move to this till I theme it.
D
.
king.james said:
DSB can we just flash the firmware and then restore our ROM? I am on ViperRez, just want to make sure if I have to install the ROM along with the Firmware or if I can just update the Firmware by itself.
Thanks,
Click to expand...
Click to collapse
you must be on the official ics ruu to apply today's ota in order to upgrade the firmware，then can restore ViperRez，i am the same with you，and i did that，everything is ok.
Sent from my ADR6425LVW using xda premium
live2die said:
you must be on the official ics ruu to apply today's ota in order to upgrade the firmware，then can restore ViperRez，i am the same with you，and i did that，everything is ok.
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
You cant just download the firmware he has here and flash it?
Evilmonstertruck said:
You cant just download the firmware he has here and flash it?
Click to expand...
Click to collapse
No! This is an update to the OTA!
I will edit the OP.
D
.
dsb9938 said:
No! This is an update to the OTA!
I will edit the OP.
D
.
Click to expand...
Click to collapse
Oh ok.. I got you..
Thank you
Thanks for all of your work and time DSB!!!
This is awesome, great news. Now us global users can finally have a stable 3.6 build as a base!
One question though, I'm on the old gingerbread firmware so to flash this I should flash both files through hboot, correct? The 500 MB one first then the 33 MB, right?
Sent from my ADR6425LVW using Tapatalk 2
I created a new working gapps.zip for the Fuhu Nabi2. This gapps package will not give you the 'Android Upgrading' on every boot on your Nabi2. You can install this through TWRP, or you can replace the gapps.zip file in the jmzroot pack. If you are using the files and instructions from http://forum.xda-developers.com/showthread.php?t=2016463 then you already have the new working gapps.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
All links contain the same new working gapps file.
http://dl.dropbox.com/u/6529005/FuhuNabi2/t499users_fuhu_nabi2_gapps.zip
https://docs.google.com/file/d/0BwaDAjicM-yEUWhVY25ZTWJwQ3c/edit
https://www.box.com/s/vfquoamzx387h1hf5ha5
Mirror courtesy of ALD3(thanks): https://www.box.com/shared/4e8fr7itux7janjhk2qq
md5sum 6a957a0aa9961cfe2801ceff8f936a05
t499user said:
I created a new working gapps.zip for the Fuhu Nabi2. This gapps package will not give you the 'Android Upgrading' on every boot on your Nabi2
Should I call this the Christmas Edition?
https://www.box.com/s/vfquoamzx387h1hf5ha5
Click to expand...
Click to collapse
Wow already out of bandwith on box. Dang
ALD3 said:
Wow already out of bandwith on box. Dang
Click to expand...
Click to collapse
Added another mirror.
t499user said:
Added another mirror.
Click to expand...
Click to collapse
Great but don't see the link.
Edit!!!!!!!
Got it and downloaded. Thank you kind sir and Merry Chritmas.
Also I can mirror it if you want me to, just let me know. Going to be popular. Lol
ALD3 said:
Great but don't see the link.
Edit!!!!!!!
Got it and downloaded. Thank you kind sir and Merry Chritmas.
Also I can mirror it if you want me to, just let me know. Going to be popular. Lol
Click to expand...
Click to collapse
Thanks, I will send you a PM
Do I need to flash this over existing rooted Gapps install and clear caches?
custommx3 said:
Do I need to flash this over existing rooted Gapps install and clear caches?
Click to expand...
Click to collapse
That's what I did in Twrp and worked great.
hy guys where can i find the drivers cuz i tried to root and flash recovery but the procces stuck forever
ZzB3B0zZ said:
hy guys where can i find the drivers cuz i tried to root and flash recovery but the procces stuck forever
Click to expand...
Click to collapse
You probably meant to post in this thread: http://forum.xda-developers.com/showthread.php?t=1905674
There is a link there for the drivers.
Or if you are on Linux, you don't need any drivers. http://forum.xda-developers.com/showthread.php?t=2016463
t499user said:
I created a new working gapps.zip for the Fuhu Nabi2. This gapps package will not give you the 'Android Upgrading' on every boot on your Nabi2
Should I call this the Christmas Edition?
All links contain the same gapps file.
http://dl.dropbox.com/u/6529005/FuhuNabi2/t499users_fuhu_nabi2_gapps.zip
https://docs.google.com/file/d/0BwaDAjicM-yEUWhVY25ZTWJwQ3c/edit
https://www.box.com/s/vfquoamzx387h1hf5ha5
Mirror courtesy of ALD3(thanks): https://www.box.com/shared/4e8fr7itux7janjhk2qq
md5sum 6a957a0aa9961cfe2801ceff8f936a05
Click to expand...
Click to collapse
wow thanks :cyclops:
got to love this thread :cyclops:
question
does this upgrade to 1.9.37 from 19.16
i download t499users_fuhu_nabi2_gapps.zip rename to gapps.zip copy them to jmzrootpackage\files and overwrite
then run the .bat file as per the directions
did i miss something
ALD3 said:
That's what I did in Twrp and worked great.
Click to expand...
Click to collapse
Are you talking about the app caches or data/dalvik?
reade0871 said:
Are you talking about the app caches or data/dalvik?
Click to expand...
Click to collapse
All I cleared was dalvik after install of gapps
---------- Post added at 03:21 PM ---------- Previous post was at 02:23 PM ----------
srgsng25 said:
does this upgrade to 1.9.37 from 19.16
i download t499users_fuhu_nabi2_gapps.zip rename to gapps.zip copy them to jmzrootpackage\files and overwrite
then run the .bat file as per the directions
did i miss something
Click to expand...
Click to collapse
NO! this is ONLY to updated gapps after you have updated to 1.9.37 and rooted with jmz root tool. You must update to 1.9.37 before your root, updated on your nabi by going it to settings/ about tablet/Update. Run this manually, there are 2 software updated. Then when your root use option 2 on jmz. Follow the directions and make sure a backup is made. It will push root.zip and gapps to your tablet, which you must flash manually in recovery. You will get quicker responses from the forum that you downloaded jmzrootpackage and a ton of information there.
ALD3 said:
That's what I did in Twrp and worked great.
Click to expand...
Click to collapse
hey do you know how to get stock recovery back so i can restore to stock because my wifi is messed up
djhanos said:
hey do you know how to get stock recovery back so i can restore to stock because my wifi is messed up
Click to expand...
Click to collapse
Yeah - if that's the direction you want to go... t499 posted how to at the end of his ubuntu linux rooting guide. Instructions easy adapted for Windows if you prefer.
http://forum.xda-developers.com/showthread.php?t=2016463
There is also a full backup from TWRP from another user you can download and restore in the other Nabi thread that supposedly brings your nabi up to date and restores wifi. http://forum.xda-developers.com/showthread.php?t=1905674&page=97 look for posts from e2950, and replies to his post for more info.
srgsng25 said:
does this upgrade to 1.9.37 from 19.16
i download t499users_fuhu_nabi2_gapps.zip rename to gapps.zip copy them to jmzrootpackage\files and overwrite
then run the .bat file as per the directions
did i miss something
Click to expand...
Click to collapse
No and yes. You have to do your OTA updates to get up to 1.9.37 either OTA or manually from microsd card. I have posted the OTA files at the bottom of http://forum.xda-developers.com/showpost.php?p=35287470&postcount=1
Yes you can just replace the gapps.zip in the jmzrootpackage with this gapps package(name it gapps.zip) and then run the script.
djhanos said:
hey do you know how to get stock recovery back so i can restore to stock because my wifi is messed up
Click to expand...
Click to collapse
You can also restore your system to the backup that you should have on /sdcard/TWRP/backup...
The backup should have been created by the root/gapps/backup script.
Just boot into the TWRP recovery and choose restore, then pick the backup that was made. Then do your OTA updates, and reinstall root/gapps/etc.
Thank you very much, t499user, for the updated gapps/no more updating on boot fix. It worked flawlessly.
I could mirror on Box/Dropbox too if you need. Just let me know.
Sent from my VS910 4G using Tapatalk 2
how to boot into twrp? I hold vol - + and power and choose recovery kernel and get what looks like the stock recovery. I do have gapps from running the script a few weeks ago.
ProCision said:
how to boot into twrp? I hold vol - + and power and choose recovery kernel and get what looks like the stock recovery. I do have gapps from running the script a few weeks ago.
Click to expand...
Click to collapse
Sounds like you only had temporary root, you will have to root it again.
Hello everyone. This is my first tutorial with Gear S so I hope it will help someone.
First of all
I am not responsible for any damage done to you deviceI saw in this Tutorial thread: http://forum.xda-developers.com/gear-s/development/definitive-guide-to-rooting-gear-s-t2973455, that some people have unsupported firmware versions and they can't root they'r device. It is not true. You can root your device, if you will follow this simple guide.
What do you need:
1) Gear S
2) Charging cradle with USB cable
3) PC running Windows (because windows is only OS I know XD)
4) Odin 3.09: https://drive.google.com/open?id=0B4xXHWEm81OleU0wckt0S2pjSU0
5) supported firmware downloaded from here: http://www.sammobile.com/firmwares/database/SM-R750/ (it is just on you which one do you pick, but it must be supported in the root thread)
6) Drivers: https://drive.google.com/open?id=0B4xXHWEm81OlT1ZBeXdHYXZqQTA
If you have everything downloaded you can proceed to the tutorial it selfStep by step firmware changing guide:
1) Unzip downloaded software and install drivers
- you should end with one .MD5 file and one .dll file (I am not sure, if the .dll is needed)
2) Open Odin 3.09
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- Here you have to Tick AP, click on AP and select your .MD5 file
-you should start to see something like this (wait until it says leave CS..)
- you can continue if you see this
3)Untick Auto reboot
4) Enable USB-Debugging on Gear S
- Settings -> Gear Info -> USB Debugging
5) Put your gear S into download mode
https://www.youtube.com/watch?feature=player_embedded&v=qwcf79m9ycw
- credits go to cipherswitch
6) Connect your gear S to PC
- you should see this
7) Click start and wait till it is done
- when it is done you will see this
8)Wait till Gear S reboot
- Now just look at the firmware page and there should be new software version
If you have an error
-repeat everything but with different firmware version
P.S.: Sorry if you can't see pictures, so if you have problem just look into attachment they are listed here
My tmobile gear is on a newer firmware. So do i just roll back to an earlier firmware then root?
Thanks
***firmware version R750TUVU1APC1
Sent from my SM-N930T using XDA-Developers mobile app
louforgiveno said:
My tmobile gear is on a newer firmware. So do i just roll back to an earlier firmware then root?
Thanks
***firmware version R750TUVU1APC1
Sent from my SM-N930T using XDA-Developers mobile app
Click to expand...
Click to collapse
I downloaded the exact same one from sammobile then I flashed the AOA7 root file from the root thread and it works fine. The software version will still be AOA7 but I think the baseband will be APC1 but mine is working flawlessly. Also you could still flash stock AOA7 first then root but theres no need as I've tested it.
i can't root my gearS R750XXU2BOK1_KTC ( korean) . Who will help me to root my gear ? i did look like that but it can't. please help me
vitdiesel said:
i can't root my gearS R750XXU2BOK1_KTC ( korean) . Who will help me to root my gear ? i did look like that but it can't. please help me
Click to expand...
Click to collapse
did u tried different supported rom?
Kubas_inko_CZ said:
did u tried different supported rom?
Click to expand...
Click to collapse
because my gear was from KTC carrier, so i am afriad to tried other room to lock sim.? if u know how i can root that, plz help me.
as long as i know, changing stock rom does not affect carrier, but if u are scared, dont try it (i would try it for sure), because u can go totally back by flashing your stock rom.
Do anyone have the root files still ?
Sent from my SM-N950U using Tapatalk
mr pnut said:
Do anyone have the root files still ?
Click to expand...
Click to collapse
I have the same question...
sonay705 said:
I have the same question...
Click to expand...
Click to collapse
As i do to, really in need of those files, i some o e find them give me a shout... thankx
Sent from my SM-N9300 using Tapatalk
sonay705 said:
I have the same question...
Click to expand...
Click to collapse
Alright guys i have the file rootfs.tar...
Give me a bit, i'll get it uploaded
Here's the root file....enjoy!
Hit the Thanks Buddy Button !
Lol
https://mega.nz/#!MYE1kSSS!PHy1-fa0Qdoy4lLVWDORcJ5CXqq8B_aBXXUiJx2C78w
louforgiveno said:
Here's the root file....enjoy!
Hit the Thanks Buddy Button !
Lol
https://mega.nz/#!MYE1kSSS!PHy1-fa0Qdoy4lLVWDORcJ5CXqq8B_aBXXUiJx2C78w
Click to expand...
Click to collapse
Thanks mate this will make the difference, flash with odin and push files trough adb right? Or is there a file explorer included. Thanks again most appreciated...
Sent from my SM-N9300 using Tapatalk
PTHugo said:
Thanks mate this will make the difference, flash with odin and push files trough adb right? Or is there a file explorer included. Thanks again most appreciated...
Click to expand...
Click to collapse
Sorry, sounds right...can't remember the steps off hand.
Inside the .tar is an image file, might need to be unpacked, sorry just don't remember the steps.
Just follow the guide and use this file.
Best of luck.
louforgiveno said:
Sorry, sounds right...can't remember the steps off hand.
Inside the .tar is an image file, might need to be unpacked, sorry just don't remember the steps.
Just follow the guide and use this file.
Best of luck.
Click to expand...
Click to collapse
Thanks again , i'll figure it out eventually, we always got stock to clean the mess when we **** the bed, [emoji4] can't thank you enough it's been long since someone played with this device but i just keep coming back to it, i really like it a lot... All the best, thanks once more [emoji4]
Sent from my SM-N9300 using Tapatalk
louforgiveno said:
Here's the root file....enjoy!
Hit the Thanks Buddy Button !
Lol
<url> ...
Click to expand...
Click to collapse
Which FW rooted?
sonay705 said:
Which FW rooted?
Click to expand...
Click to collapse
Good question.....all i know it was in a folder named latest created late in 2016.....not sure if that helps at all...
Maybe the info is somewhere in the "image" file...sorry been a long time since i used the files.....
louforgiveno said:
Good question.....all i know it was in a folder named latest created late in 2016.....not sure if that helps at all...
Maybe the info is somewhere in the "image" file...sorry been a long time since i used the files.....
Click to expand...
Click to collapse
Okay it is a custom binary but still write protected shows anther firmware version, now i miss something and coz the beginning of the thread was deleted i'm not quite sure what is i mean is rooted (at least i think it is coz the binary now shows custom), now the deal is there must be or should be some kind of file manager or su manager on the watch i already tryed to push using adb and fastboot but it doesn't work so how did you push tose? Was it by flashin some other thing with odin, please try to remember i realy am trying to get this thing available to other samsung's high end phones, i'm trying to get it working with any phone brand so i really need to get in the hart of the thing to make a few changes, i already (think) i got a way to do it, sorry to trouble you mate you already did someting awsome thanks
Sent from my SM-N9300 using Tapatalk
PTHugo said:
Okay it is a custom binary but still write protected shows anther firmware version, now i miss something and coz the beginning of the thread was deleted i'm not quite sure what is i mean is rooted (at least i think it is coz the binary now shows custom), now the deal is there must be or should be some kind of file manager or su manager on the watch i already tryed to push using adb and fastboot but it doesn't work so how did you push tose? Was it by flashin some other thing with odin, please try to remember i realy am trying to get this thing available to other samsung's high end phones, i'm trying to get it working with any phone brand so i really need to get in the hart of the thing to make a few changes, i already (think) i got a way to do it, sorry to trouble you mate you already did someting awsome thanks
Sent from my SM-N9300 using Tapatalk
Click to expand...
Click to collapse
I'll rack my brain to try to remember....but from what i do remember it wasn't like root for a phone.....no su app (tizen os) ...just able to execute admin commands via adb.
If you were to load android os well then su will probably be available.
I'll look back through my files, looking for any guides when i get a chance.
Sent from my SM-G950U using Tapatalk
louforgiveno said:
I'll rack my brain to try to remember....but from what i do remember it wasn't like root for a phone.....no su app (tizen os) ...just able to execute admin commands via adb.
If you were to load android os well then su will probably be available.
I'll look back through my files, looking for any guides when i get a chance.
Sent from my SM-G950U using Tapatalk
Click to expand...
Click to collapse
Thanks mate, i've still got trouble to get adb to list i eventry on download mode (we now that's only for odin) i read somewhere that some samsung devices do work that way (well i don't think they do coz download mode puts the device listening only) anyway coz we are always learning something i gave that a shot has we already knew nop it doesn't go, so thanks once more for your help it's very important and welcome, i'm very grateful for your effort...
Sent from my SM-N9300 using Tapatalk