Related
With the exception of a modified hardware/qcom/display for legacy support this is a straight compile of Codeaurora's 4.1.1 (M76XXUSNEKNLYA2515)
http://threader.zapto.org/experimental/s7/codeaurora-4.1/102113/boot.img
http://threader.zapto.org/experimental/s7/codeaurora-4.1/102113/system.img.bz2
Unpack system.img.bz2
Flash with fastboot.
fastboot erase cache
fastboot erase userdata
fastboot flash boot boot.img
fastboot flash system.img
Not working:
Phone.
Bluetooth.
Sensors.
Wifi.
Working:
display
Kernel source:
https://github.com/threader/Huawei_S7_kernel_2.6.35
Hardware/qcom/display & devices/huawei/s7
http://threader.zapto.org/experimental/s7/codeaurora-4.1/sources-buildprefs/
Android sources:
https://github.com/threader/
Credits
Asturel, dzo. Thanks!
Boot image will boot asturels CM10 http://goo.im/devs/asturel
A boot image to boot asturels cm10.1 on 10x http://threader.zapto.org/experimental/s7/cm10.1/boot.img
Hi,
Went trough my old disks and uploaded everything i could find to https://mega.co.nz/#F!3wAQxDDL!2MgX7NmPBUIOVYP3zLYElw
Upper Folders:
* Original Firmware (Norway - Sweden - Brazil)
Norway = 103 Sweden = ? Brazil = 101-2 || Brazil boot image can be used with Norway rom, a 101 will loose its camera when presented with the wrong version kernel
Seemingly ancient Huawei update app, for updating 2.1 to 2.2. ( In Firmware Folder )
* Original Froyo and Emotion Kernel sources
Seemingly lost from Huawei's site. Could not find the 2.6.32 kernel last i checked let alone 2.6.28
* Broadcom bcm4329 sources
Original upload by Huawei, suggest downloading all and comparing. Remember there being a problem with either of the files
Dev folder:
* Device-huawei-s7 / Hardware-qcom-display-s7 ( Codeurora 4.1.x / CM 10 (?) / JB)
To be compiled against a "M76XXUSNEKNLYA2515" Codeurora 4.1.x / CM 10 (?) / JB)
* Kernels
Latest 2.6.32.61 from me, suggest using the original config instead of the mine.
Earlier release of 2.6.35.14 - Should be stable but suggest github - https://github.com/threader/Huawei_S7_kernel_2.6.35 - again use your config!
What i think is the original Huawei S7 kernel just fixed to compile.
Codeaurora msm-2.6.32 - which i suggest grabbing this amongst others, if you want to start from scratch with kernel-2.6.32-FROYO.tar.bz2
* Broadcom - bcm4329
Unknown status, suggest a thorough look and compare against original Huawei - bcm4329 release.
* Codeaurora 4.1.x ( 4.1.1 ) M76XXUSNEKNLYA2515
Latest two experimental builds i could find
Codeurora-4.1.x-s7-nov-6-2013 was actually the last 4.1.1 date i found in my build directory, this may be wrong, but i uploaded what sees to be the last build i did really, but it might require 21-10-2013 boot.img to work.
[ROM]【7.1.1】 N6F26U -【Stock】【Lite】- 03/14/2017
Build Information
Simple, slimmed down & stable releases of stock rooted Android.
Code:
[B]Official N6F26U 7.1.1 factory image based
March, 2017 security patch level
Stock kernel
SuperSU
Busybox
Forced encryption disabled
Optional Google /system apps and bloat removed
Persistent ADB notification disabled
Tether provisioning disabled[/B]
Installation Instructions
Code:
[B]Note: You are responsible for making sure you are on the latest bootloader & modem[/B]
1) Reboot to latest TWRP recovery and wipe system, cache, dalvik and data in TWRP
2) Flash ROM
3) Reboot
Download
03/14/2017 build here
Change logs
Code:
[B]03/14/2017[/B]
-Based on N6F26U
[B]02/07/2017[/B]
-Based on N6F26R
-Updated Busybox
[B]01/14/2017[/B]
-Update-binary/script updates
-Fixed the speaker phone echo thanks to Yoinx & Beanstown
[B]01/05/2017[/B]
-Based on N6F26Q 7.1.1
-Updater script/Binary changes
-Updated SuperSU and Busybox
[B]11/10/2016[/B]
-Updates to updater-script
[B]11/08/2016[/B]
-Rebased on NBD91P
-Updated busybox
[B]10/04/2016[/B]
-rebased on NBD90Z 7.0
-SuperSU 2.78
-Latest busybox
[B]07/06/2016[/B]
-Based on MOB30O factory image
-Updated SuperSU to 2.76 stable
-Updated all google apps to latest versions
[B]06/06/2016[/B]
-Based on MOB30M factory image
-Updated SuperSU to 2.74-2
-Updated all google apps to latest versions
-Gmail, Photos and Calendar added back into ROM
[B]05/10/2016[/B]
-updater-script rewrite
-Updated SuperSU to 2.72
-Busybox added (1.24.2 "systemless")
-Updated Google app
-Updated Google Keyboard to 5.0.20.121473290
--Left/Right handed mode
--Keyboard resizing
--Improved themes
--Number row on password fields
-Updated Google Dialer
-Removed AOSP Gallery (depreciated)
[B]05/04/2016[/B]
-Updated SuperSU to 2.71
-Updated Nova Launcher (Nova build only)
[B]Note: Busybox is still not included, if you need busybox please use the busybox app
from the market to install in either /su (systemless) or /system/xbin (System) depending
on your requirements[/B]
[B]05/02/2016[/B]
-Based on MOB30I factory image
-Updated system apps to latest versions
[B]*Full wipe recommended as we are on a new branch[/B]
[B]04/05/2016[/B]
-SuperSU 2.65 stable
[B]04/04/2016[/B]
-Based on MMB29X factory image
-SuperSU 2.71
-Updated system apps to latest versions
-Busybox is no longer included but can be added via the [URL="https://play.google.com/store/apps/details?id=stericson.busybox&hl=en"]busybox app on the playstore[/URL]
[B]03/07/2016[/B]
-Based on MMB29V factory image
-SuperSU 2.68
-Updated all system apps to latest versions
[B]02/02/2016[/B]
-Based on MMB29Q factory image
-SuperSU 2.67
[B]01/05/2016[/B]
-Updated Google Play Store
[B]01/04/2016[/B]
-Based on MMB29S factory image
-SuperSU 2.66
[B]12/22/2015[/B]
-Updated SuperSU to 2.64
-Updater-script touch ups
[B]12/17/2015[/B]
[B]-Swapped out updater-script and update-binary[/B]
-removed set_metadata - (sets file/directory permissions when flashing a rom, but also adds file contexts.)
We are now using sparse_dat - (The permissions, symlinks, and file contexts are all added inside a sparse image.)
-Fixed USB OTG
-Updated Google app
For more information view [URL="http://forum.xda-developers.com/showpost.php?p=64368494&postcount=2453"]this post[/URL]
[B]12/15/2015[/B]
-Removed init.d from system/etc (depreciated and not supported by the stock kernel)
-Added latest Google Camera to /system
[B]12/12/2015[/B]
-Updated SuperSU to 2.62_r3
-Edited T-Mobile USA APN to "default,supl,dun" to allow tethering
[B]12/10/2015[/B]
-SuperSU 2.62
-Updated Google Play Services
-Updated Google Talkback
Note: This SuperSU update will support some root apps that didn't work on 2.61
however Android Pay will not work unless you remove /su/xbin_bind and reboot.
This will however break support for those root apps with older SU calls to system.
[B]12/09/2015[/B]
-Stock kernel
-Updater-script adjustments
-Systemless root will be patched by the ROM right after the kernel is extracted
-SELinux enforcing
-- No force encrypt included
-- No warning message on boot
--All third party kernels will now be fully compatible as we are using 100% stock ramdisk
[B]12/08/2015[/B]
-Rebased on MMB29K
-Updated Google Play Services
-Updated Google Play Store
-Updated Webview
-Updated Google Dialer
-Updated Google Contacts
-Updated Google Connectivity Services
-Updated Google Search
-Updated AOSP Gallery to newest source
-Updated to latest Busybox
-Merged new 6.0.1 ramdisk into hC kernel b11 stable
-Added SuperSU 2.61 "systemless" Root
Note: after flashing, upon rebooting twrp will ask to install root as it can't find it on the system partition.
make sure you don't install it there as it will break things, we are using a systemless root moving forward
[B]11/05/2015[/B]
-Rebased on MRA58R
-Updated Google Play Services
-Updated Google Play Store
-Updated all other required system gapps
-Updated AOSP Gallery to newest source
-Updated hC kernel to b11 final
Note: Everything from 6.0_r2 has been re-implemented from scratch on the new factory image.
Future MRA58R based ROM updates will only update the kernel & google system apps for new users to the ROM.
kernel update zip's will be provided for users currently on this release so there will be no need to flash a full
ROM zip until next OTA. ;)
ENJOY!
[B]11/03/2015[/B]
-Rebased on MRA58N
-Updated all required system GAPPS
-Everything from previous 6.0 releases implemented from scratch
[B]10/28/2015[/B]
-Updated kernel to hC b11-t1
--This is build 10 stable with a bug fix, no other changes
--Reduced red tint at low brightness commit is pushed in this kernel build along with a lot of other enhancements
-Removed su.d permissive script as the kernel is set to permissive by default
-Updated Google Play Services
-Updated Google Webview
[B]10/24/2015b[/B]
-Reverted framework-res modification (plug in usb to wake)
[B]10/24/2015[/B]
-Updater script clean up
-Added light weight AOSP Gallery
-Disabled annoying screen wake when plugging in USB
[B]10/23/2015[/B]
-Reverted userdebug build to user build
-Multi-window reverted
-"Overcounted" battery stats will no longer appear
-Extra debug logging disabled
-Updated Google search app
[B]10/21/2015[/B]
-Minor edits to updater-script
-Updated kernel to hC-b9 stable
-Enabled Multi-window option in developer settings
-Added "dun" to T-Mobile APNs to allow tethering to work
-Updated Google Keyboard
-Removed Google Messenger (Download it from the Play Store)
[B]10/14/2015[/B]
-Update-binary and updater-script changes
-SuperSU options integrated into Settings
-SuperSU updated to 2.52
-Updated kernel to hC-b8 stable
[B]10/09/2015[/B]
-Updated Google Talkback
-Updater-script updates
-Google Camera and Google Wallet removed from System
-75 mb free on /system partition for layers/ad-away etc.
[B]10/08/2015[/B]
-Updated sepolicy for hC build 7 stable with latest from Chainfire
-Encrypted devices will no longer bootloop
[B]10/07/2015c[/B]
-Updated sepolicy for hC build 7 stable
-SELinux set to permissive
[B]10/07/2015b[/B]
-Updated sepolicy
-Triangle screen no longer shows on boot
-Updated SuperSU
-Updated hC kernel to build 8
[B]10/07/2015[/B]
-Rebased on 6.0
-Rooted and busybox
-Updated all system apps for the cleanest possible boot
-Latest hC M kernel
Note: Make sure you are on the 6.0 bootloader and modem before flashing or you may experience issues!
[B]09/12/2015[/B]
-Updated kernel to b11 stable
[B]09/11/2015[/B]
-Rebased on latest Factory Image (INTL)
-Updated kernel to b11-t2 (latest)
[B]08/12/2015[/B]
-Rebased on latest Factory Image (INTL)
-Updated to hC-b9-zen stable
*no longer supporting WIFI calling until Google gets it's act together and makes it unified with the INTL builds*
XDA:DevDB Information
MRA58K [Lite], ROM for the Nexus 6
Contributors
Danvdh
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: Factory Image
Version Information
Status: Stable
Created 2015-03-20
Last Updated 2017-03-14
reserved
Does this have hotspot?
iainaaldrich said:
Does this have hotspot?
Click to expand...
Click to collapse
Does for me, yep. I'm tethering now to upload it. I haven't changed much from the stock system dumps provided.
Sounds promising, will give it a go when uploaded. Cheers
Sent from my Nexus 6
YES!
One of the few XDA devs I trust for stable roms. Coming from an S4 :good:
Great to see ya over here! Been running your GPE ROM on my VZW S4 for a while now. I'm assuming this doesn't force encryption right? Can't wait to give it a go!!!
build is uploaded
nice to see you again everyone
Do you have to be on a 5.1 bootloader/radio in order to flash this? ie. http://forum.xda-developers.com/nexus-6/development/bootloader-radio-boot-img-boot-loader-t3052425
Danvdh said:
build is uploaded
nice to see you again everyone
Click to expand...
Click to collapse
Downloading now.
Sent from my Nexus 6
Great to see you here. Your S4 GPE ROM was my dd forever!
airnique23 said:
Do you have to be on a 5.1 bootloader/radio in order to flash this? ie. http://forum.xda-developers.com/nexus-6/development/bootloader-radio-boot-img-boot-loader-t3052425
Click to expand...
Click to collapse
would be recommended yeah, I believe Mikey had a method to flash the latest bootloader and modem with 1 click in windows. let me dig it up
Hey Dan. My daughter still uses your GE ROM on my old vzw S4 as a sort of android iPod touch. Nice to see you over here.
I loved your S4 ROM! I'll give a try on the nexus 6 one!
brizey said:
Hey Dan. My daughter still uses your GE ROM on my old vzw S4 as a sort of android iPod touch. Nice to see you over here.
Click to expand...
Click to collapse
Awesome I'm glad people are still enjoying my GPE, I still continue to work on it with kryten2k35 although he has been doing the bulk of the work recently. he's pretty much the man
for those of you wondering about the bootloader / modem
https://www.androidfilehost.com/?fid=95916177934543135 is from MikeyXDA's thread and the credits goto Scrosler for the batch file, its a 1 click install assuming you're in bootloader mode (It's gonna take a bit for me to stop calling it download mode) simply run the flash radio and firmware.bat
to all of you who want to see my previous work, take a look here http://forum.xda-developers.com/showthread.php?t=2557353
I just wanted to take this time to thank MikeyXDA and Scrosler for helping me get my feet wet a bit early and build a type of ROM I've been known to use / release, the deodex base and APM code really cut the time needed to get this out
You had the dandroid rom for the S4. I ran that for a while. Glad to see you with the Nexus 6.
dxwilliams40 said:
You had the dandroid rom for the S4. I ran that for a while. Glad to see you with the Nexus 6.
Click to expand...
Click to collapse
Dandroid was S3, GPE was S4
Omw Dan!!!! Yayyy! One of the first devs I ever donated to
Just looked at your other rom, if you could put in some custom mods in this, like swapping navigation buttons and pressing volume rocker to skip tracks, I would love you forever haha. Also, does this force encrypt?
Danvdh said:
Dandroid was S3, GPE was S4
Click to expand...
Click to collapse
I guess it was further back than I thought. Either way, no more Samsung love.
[ROM] ✵ N6XShamuM ✵ MOB30w ✵ Xposed & GravityBox ✵ v2.2.4 ✵ Aug 4
Welcome to the N6XShamuM ROM This rom is based on Android M 6.0.1 MOB30W odexed factory image.
Disclaimer
Please note that you install this rom at your own risk. I am not responsible if you brick your device. We will try to help you resolve any issues, but there is no guarantee we will be able to do so.
Credits
hells-Core Kernel hC-b17-t2-permissive-M
chainfire - Root
Danvdh - Updater Script
ROM Features
Based on Android Marshmallow 6.0.1 MOB30W odexed factory image
Aroma installer, you have full control over how the ROM will be and what apps you want installed.
Rom setup for all devices!
Apps always updated to latest versions
WIFI tethering
hells-Core Kernel
Encryption disabled by default
Option to enable LED
Sound boost mod
RRO Layers [6.0 compatible]
ADB enabled by default
ADB icon hidden by default
Option to install Xposed-Version 85
Option for GravityBox-Version 6.1.3
Option for device
Kernel Source
XDA:DevDB Information
N6XShamuM, ROM for the Nexus 6
Contributors
HeckNoTechnO
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Android 6.0.x firmware
Based On: Factory Image
Version Information
Status: Stable
Current Stable Version: 2.2.4
Stable Release Date: 2016-08-04
Created 2015-04-07
Last Updated 2016-08-04
Downloads
Version 2.2.4- 08/04/2016
[URL="https://forum.xda-developers.com/devdb/project/?id=9114#downloads"]Download[/URL]
MD5: 39e3c5ff13646b96c2990f906f503edd
Change Log
N6XShamuM Version 2.2.4-08/04/2016
Latest factory image MOB30W 6.0.1
The New
Security patches
Previous Change Logs
N6XShamuM Version 2.2.3-06/14/2016
Latest factory image MOB30M 6.0.1
The New
xposed ver 85
Latest Gravitybox 6.1.3
N6XShamuM Version 2.2.2-05/07/2016
Latest factory image MOB30I 6.0.1
The New
xposed ver 84
Latest Gravitybox 6.1.1
N6XShamuM Version 2.2.1-04/05/2016
Latest factory image MMB29X 6.0.1
The New
xposed ver 81
Latest Gravitybox 6.0.8
Removed Wallet
N6XShamuM Version 2.2.0-03/07/2016
Latest factory image MMB29V 6.0.1
The New
SuperSU ver 2.67
hC b14-M-permissive
Latest Gravitybox 6.0.5
N6XShamuM Version 2.1.9-02/02/2016
Latest factory image MMB29Q 6.0.1
The New
xposed ver 80
Latest Gravitybox 6.0.4-rev1
Added back Wallet option in aroma
Bug Fixes
N6XShamuM Version 2.1.8-02/01/2016
Latest factory image MMB29Q 6.0.1
The New
Latest Gravitybox 6.0.4b
Added back Wallet option in aroma
N6XShamuM Version 2.1.7-01/19/2016
Latest factory image MMB29S 6.0.1
The New
Minor bug fixes (Hopefully no system updates will show)
hells-Core Kernel hC-b14-M-permissive
N6XShamuM Version 2.1.6-01/07/2016
Latest factory image MMB29S 6.0.1
The New
Minor bug fixes
N6XShamuM Version 2.1.5-01/05/2016
Latest factory image MMB29S 6.0.1
The New
Based on Android M 6.0.1 MMB29S odexed factory image
Removed Google Wallet (Doesn't work on this rom-Download from playstore if needed)
N6XShamuM Version 2.1.4-01/03/2016
Latest factory image MMB29K 6.0.1
The New
New logo
hells-Core Kernel hC-b13-M-permissive
N6XShamuM Version 2.1.3-12/28/2015
Latest factory image MMB29K 6.0.1
The New
New Name N6XShamuM
xposed version 79
latest Gravitybox Version 6.0.3
N6 New ShamuM Version 2.1.2-12/19/2015
Latest factory image MMB29K 6.0.1
The New
Added back APN settings (I have sprint so it doesn't show-Confirmed by tester)
Added latest Gravitybox
N6 New ShamuM Version 2.1.1-12/17/2015
Latest factory image MMB29K 6.0.1
Version 2.1.0 - 18/11/2015
Aroma installer re-written from scratch! New layout
Disabled vibration in aroma installer
Xposed and GravityBox is back GravityBox is pre-activated on first boot!
Version 2.0.0 - 08/11/2015
Updated base to MRA58R odexed
Updated aroma installer to latest version
RE-wrote aroma installer
Updated all apps to latest version
Removed stock kernel for now
Updated leanKernel to latest version
Added option to root
Version 1.3.0 - 22/10/2015
Minor changes to Aroma installer
ADB now enabled by default
ADB Icon hidden by default
Sound boost mod added back!
Option to centre clock
Option to swap NAV bar buttons
Option to centre clock and swap NAV bar buttons
Enable LED - Still need app to control it
All above options are selectable via Aroma installer, now you choose what you want
Version 1.2.0 - 20/10/2015
Removed all apps that can be downloaded from Playstore
Reduced ROM size from 1.08gb to 800mb
Updated Chrome to latest version
Updated Photo's app to latest version
Updated leanKernel to latest version
Updated Adreno Drivers to latest version
Re-added kernel choice, stock kernel and leanKernel
Rom now installs correctly when all options are selected in Aroma
Now you can choose from the following GAPS in Aroma:
Camera, Chrome, Messaging app, Wallet - all other apps removed
Version 1.1.0 - 16/10/2015
Root issues fully fixed
Selinux no longer enforced
Update-script amended with new symlinks and permissions - Massive props to @Danvdh
SuperSU icon moved to Settings
ProjectFi app now a selectable add-on
Stock kernel removed
Google keyboard app updated
New logo
Version 1.0.0 - 14/10/2015
New base - MRA58K odexed!!!
Aroma installer updated to version 3.00
Aroma installer re-written
Aroma installer - status bar fixed
Aroma installer - New logo!
All apps updated to latest version
SuperSU updated to 2.52
leanKernel updated to v3.0b1
All mods temporally removed as this is a new base
Version 6.0.0 - 12/9/2015
New base - LYZ28K de-odexed!!!
Stock kernel updated to latest version
All apps updated to latest versions
Xposed framework updated to version 74
Version 5.1.3 - 4/9/2015
Updated xposed framework to v73 official!
Updated leanKernel to v2.13
Updated all apps to latest versions
Version 5.1.2 - 23/8/2015
Updated xposed framework to version 71
Updated all apps to latest versions
Other minor fixes
Version 5.1.1 - 15/8/2015
Reverted Xposed apk to previous version
Reverted GravityBox apk to previous version
Re-added Sound boost mod
Aroma installer fixes
Version 5.1.0 - 14/8/2015
Rewrote aroma installer, cleaned up options
Now you have a separate option for Xposed and GravityBox!
Removed sound boost mod
Removed Carrier label - can be easily download via xposed
Removed GB APM option, can be easily configured in GB
Removed Project Fi support - caused issues for most people
Hid Xposed icon in app drawer by default
Hid GravityBox icon in app drawer by default
Updated Google Plus app to latest version
Version 5.0.0 - 11/8/2015
Updated base to 5.1.1 LYZ28J T-Mobile Stagefright base!
De-Odexed and zip aligned
All apps updated to latest versions
Xposed framework updated to v70
leanKernel reverted to v2.11 (Charging issues with v2.12)
Stock kernel updated to latest version
Version 4.4.1- 8/8/2015
Fixed Project Fi not installing correctly - Only select if your a project Fi user
Fixed Sound boost mod not installing correctly
Updated leanKernel to latest version 2.12
Updated Google messaging app to latest version
Version 4.4.0- 6/8/2015
ROM LYZ28E has now been De-Odxed and zip alligned!
All apps updated to latest versions
Xposed framework updated to version 69
Screen cast entry added to build prop
Recommend full wipe as base is now de-odxed. If you try an upgrade, make sure you back up first. EDIT: Several people have confirmed it is ok to upgrade, just remember to do a backup
Note: First boot is slightly slower but let it run through.
Version 4.3.2- 2/8/2015
Updated xposed framework to version 68
Fixed Downloads app FC
Moved DocumentsUI to core rom (Needed for Downloads app)
Other minor fixes to aroma installer
Version 4.3.1 - 23/7/2015
Includes all fixes and updates from version 4.3.0
Aroma installer fixed. All applications now install correctly,
Project Fi dialer not not selected by default
leanKernel now selected by default
other minor fixes
Version 4.3.0 - 22/7/2015
Updated
Aroma Installer
leanKernel
Xposed Framework
Xposed App
GravityBox
Added
Xposed Module - Hide carrier label, Hides carrier label on Lock Screen!
Project Fi Support - Project Fi users, could you please test? Props to @BeansTown106
Changed
Added following apps into Aroma installer
Google Ears
Google Stock Messaging app - selected by default
DicumentsUI
Fixed
Minor issues in Aroma Installer
Google Plus not installing correctly
Version 4.2.1 - 14/7/2015
*Made changes to Aroma installer
*Updated Aroma installer logo
*Added TalkBack as an option in Aroma
*Made Exchange email a default ticked option in Aroma
*Reverted T-Mobile wifi fix. Hopefully should work again now cooked into ROM
*Updated SuperSU to latest version
*Other Minor fixes
Version 4.2.0 - 13/7/2015
*Updated GravityBox to latest version
*Added two new pages of options in aroma installer: Additional Keyboards and Kernel selections
*Added T-Mobile WIFI option in aroma
*Select stock kernel or leankernel in aroma
*Moved extra keyboards to aroma, so rom can be lighter in size
*Updated apps to latest versions
* Added Double Tap to Wake as an option in Aroma installer
*Email Exchange moved to an option in installer
*Other minor fixes
Version 4.1.1 - 4/7/2015
*Issues with aroma updater-script fixed
*Removed tmobile wifi option in aroma and hard coded in rom
*Changed from stock kernel to leankernel
*T-Mobile WIFI calling should now be fixed! Please test and let me know!!!!!!
Version 4.1.0 - 1/7/2015
*T-Mobile WIFI calling should now be fixed! Credits to @Danvdh for the fix!
*Updated Xsposed framework and app to latest version
*Added Led notifications! LED now works with apps such as GravityBox. Can be selected as an option in Aroma Installer Credits to @GrayBoltWolf & CM
*You can now decide to have APM activated on first boot with Aroma Installer
*Fixed all rooting issues. ROM will now root correctly on full wipe
*Updated Aroma installer
*Other minor fixes
Stable Version 4.0.0 - 27/6/2015
*Rebased on LYZ28E T-Mobile factory rom
*T-Mobile Wifi calling now available!!!!!!
*Re-worked and updated Aroma Installer
*Updated Google Apps and other apps
*Other minor changes
Stable Version 3.0.0 - 22/6/2015
ROM rebeased on LMY47Z international image
Reworked Aroma installer - Big changes
*Now you dont need to select your carrier, it is all in one rom!
Fixed issues with Gravity box not remembering choices for some users
Hopefully fixed all carrier issues for Sprint, AT&T, T-mobile users. Note: T-mobile wifi may not be available in this please test.
Removed following:
*Carrier selection mods
*Proximity fix - not needed in 5.1.1
*Connected as media device notification mod - this can be enabled in GravityBox
Made some minor changes to the Settings menu!
Test Version 3.0.0 - 26/6/2015
*ROM has been rebased on LYZ28E T-Mobile factory image
*Rom is rooted
*Kernel has been edited so encryption is not forced.
*USB enabled and icon hidde
Removed
Removed all other features in stock rom as this is a stock test build only
Version 2.1.0 - 20/6/2015
Reworked Aroma installer
Fixed all Xposed issues!
Gravity box now has APM enabled by default!
Gravity box and SuperSU now have own entries in settings menu! This depends on what you select in aroma during install.
-You can hide GravityBox icon in App drawer in settings of GravityBox
Hopefully fixed TMobile update issues
Disabled OTA check
Other minor updates
Version 2.0.0 - 17/6/2015
Rebuilt from ground up!
Rebased on LYZ28E Odexed factory image
Re-worked Aroma installer
Added Sound boost mod
Added option for Xposed and Gravity box in Aroma - GB is enabled on first boot
Removed all previous mods as they are now included in Aroma installer
Rom rooted now by default and Icon for SuperSU moved into Settings - Credit goes to @Danvdh for showing me how to do this!
Other minor updates
Version 1.2.2 - 18/4/2015
*All Status bar mods now come with option to swap Back and Recent buttons in Nav Bar!
*Aroma fixes
*Other minor fixes
Version 1.2.1 - 14/4/2015
*Fixed version numbering on ROM - New version v1.2.1
*Fixed TMobile VoLTE users - Reverted build prop back to v1.1.0
*Added Google+ as an option in installer
*Added ES File Explorer - installer option
*Added Ad-Away - installer option
*Fixed Youtube not installing
*Fixed PlusOne gallery app not installing
*Minor tweaks to aroma installer
*Couple of other minor fixes
Version 1.2.0 13/4/2015
Added option to install stock gallery app in aroma
When plugged into USB the screen now stays off - default
Volume loud warning disabled - default
Center clock - option in aroma
Battery text with green charging colour - option in aroma
Center clock and Battery text - option in aroma
- All above options have clear all recents included
Version 1.1.0 11/4/2015
Rebuilt ROM from Ground up
Added Aroma installer - Choose what you want to install!
Choose your device carrier in Aroma for better support
Fixed FC with download app
Connected as a media device notification can now be hidden as an option in the aroma installer
Advanced power menu is an option in aroma installer
Clear all button in recents is now an option in installer
Option to root device in installer
Persistent ADB debugging enabled and icon hidden as default
Battery percentage text has been removed for now. Will look at better way to implement this
Proximity Sensor Fix has been added as an option in installer
Version 1.0.0 - 7/4/2015
Initial release
Signature banners for those who want to show there support.
First!!!!
Sweet!!!! Good Job!!!
3. Will flash later afternoon !!
---------- Post added at 02:04 PM ---------- Previous post was at 02:02 PM ----------
The 3. Will flash later afternoon !!
Is this LMY or LVY build ?
i can add double tab to wake with the kernel and wake gestures apk.
but does this have long hold back to sleep?
thanks
xterra91 said:
Is this LMY or LVY build ?
Click to expand...
Click to collapse
Good spot! I have updated the OP. The rom is based on LVY47H base.
kidhudi said:
i can add double tab to wake with the kernel and wake gestures apk.
but does this have long hold back to sleep?
thanks
Click to expand...
Click to collapse
No not at present, but I will be looking to add some further mods as I find them to the image. This one would be a good one to add! I would like it myself.
#4.......
Im on your stock E rom (vzw customer). Will this rom be compatible for with carrier?
Yes it should be for all carriers. It is based of the stock Google image, not AOSP. Please try it and let me know how you get on. I would like to knoe if things like VoLTE etc are working. Just remember to make a backup of your current rom.
Sweet! More options Will have to give this a go for sure!
Hello everyone! I'm currently on a LMY47L rom. Do I need to do anything special to flash this? Or is it just the normal wipe data and caches before flashing? Thank you!
No thats it I think you should be good to go. Just take a backup beofre then you can easily revert if you have any problems.
I am looking for sprint and verizon and tmobile users to test this rom. Please let me know how you get on
Great job. Installed on sprint and all is working great so far. was on build LMY47I with the ....95r radio. Will continue to run through its paces but very happy with this so far.
This ROM is from the future? Whoa!!! ?
I really like how futuristic this ROM is
Stephen said:
No thats it I think you should be good to go. Just take a backup beofre then you can easily revert if you have any problems.
I am looking for sprint and verizon and tmobile users to test this rom. Please let me know how you get on
Click to expand...
Click to collapse
I'm on T-Mobile. I haven't flashed this rom yet, but I will let you know.
---------- Post added at 11:14 PM ---------- Previous post was at 11:08 PM ----------
Gapps included?
Ok... I started with stock 5.1 deodex with E radio, did a nandroid, wiped dalvik and cache, flashed this rom, and so far everything is working...even VoLTE. I will test tethering tomorrow and report back however, that is an easy fix!
Intro-
This is a flashable zip to patch the shared libraries which are vulnerable to the Stagefright and Stagefright 2.0 attack vectors. I have tested this on the stock TW 5.1.1 OI2 firmware.
Download-
http://files.zpivot.com/stagefright/Note-3-4-10.1-Stagefright_Fix_02_Nov.zip
Thanks/Credits
kmokhtar79 - Note 3 Patch - http://forum.xda-developers.com/galaxy-note-3/themes-apps/stagefright-vulnerability-fix-note-3-t3175087
hello world
after reading this:
https://source.android.com/security/bulletin/2017-07-01
i am pondering about if it is possible to build a
4.4.4 rom with the SecurityPatchLevel 2017-07-05
although there are many KK devices up and running, no one seems to be able
to build such up-to-date-patchlevel KK rom.
the AOSP bulletin states:
Code:
Source code patches for these issues have been released to the Android Open Source Project (AOSP) repository and linked from this bulletin.
it reads like these patches are available to 4.4.4 also.
if this is correct and these patches are available for 4.4.4
changing to L or M or N is no option and i try to find a way
to create such one!
wow...
maybe the next SPL
there popped up another one: SPL 2017-07-05
maybe now
here we go again...
kinda funny: https://source.android.com/security/bulletin/2017-08-01
Updated AOSP versions: CVE-2017-0713
A-32096780 [2] RCE High 4.4.4, 5.0.2, 5.1.1, 6.0, 6.0.1, 7.0, 7.1.1, 7.1.2
here we go again...
2017-09-05: Complete security patch level string.
This security patch level string indicates that all issues associated with
2017-09-01 and 2017-09-05
(and all previous security patch level strings) are addressed.
hell yea! all is adressed! :fingers-crossed:
CVE References Type Severity Updated AOSP versions
CVE-2017-0752 A-62196835 EoP High 4.4.4, 5.0.2, 5.1.1, 6.0, 6.0.1, 7.0, 7.1.1, 7.1.2
and 4.4.4 is updated! :laugh:
but wait ...
here we go again...
there is a 2017-10-05 even for 4.4.4 ...
left alone with unpatched roms too early!
new year, new luck?!