Related
The gist of my problem: Earlier today I successfully installed the latest CM9 from Joker (.0.7.0.0). Unfortunately, all wireless services other than WIFI were down (including SMS and telephone), and on start the phone produced an error about the com.android.phone force closing (or some such). I figured I had screwed something up, so I reflashed the clean stock firmware.
Since then (roughly 12 hours ago), I've been getting the stuck on the boot screen whenever I try flashing CM9. Relevant details follow:
Logcat doesn't help -- it tosses an error about the shell directory or file not being found (the exact error message escapes me, but I can reproduce it if need be).
I've tried formatting cache, data, and system, followed by a wipe (or two) on several occasions.
I've also tried flashing various versions of CM9 -- specifically .0.7.0.0 and .3.1. Both give the same result. I've also tried whatever version is in the KitchenSink v2.11 installer. Same result.
My CMW version is the 5.0.2.8. I installed it through RomManager (as opposed to the command prompt on Windows, which I did the first time when it quasi-worked). I've read that using v2 fixes this issue, but I can't find a live copy anywhere, so I haven't been able to try it.
Rather than going for a completely new install every time I bork something, I made a backup just after I finished unlocking and rooting the phone. I just restore that backup after each attempt, and it goes back to working fine on the stock Android firmware (3.whatever).
Any ideas? I think I'll try starting completely from scratch again and not using RomManager tomorrow, but if anyone can point out my error before then and save me a lot of -- hopefully not wasted -- effort, it would be fantastic.
Cheers,
Vash
vash265 said:
The gist of my problem: Earlier today I successfully installed the latest CM9 from Joker (.0.7.0.0). Unfortunately, all wireless services other than WIFI were down (including SMS and telephone), and on start the phone produced an error about the com.android.phone force closing (or some such). I figured I had screwed something up, so I reflashed the clean stock firmware.
Since then (roughly 12 hours ago), I've been getting the stuck on the boot screen whenever I try flashing CM9. Relevant details follow:
Logcat doesn't help -- it tosses an error about the shell directory or file not being found (the exact error message escapes me, but I can reproduce it if need be).
I've tried formatting cache, data, and system, followed by a wipe (or two) on several occasions.
I've also tried flashing various versions of CM9 -- specifically .0.7.0.0 and .3.1. Both give the same result. I've also tried whatever version is in the KitchenSink v2.11 installer. Same result.
My CMW version is the 5.0.2.8. I installed it through RomManager (as opposed to the command prompt on Windows, which I did the first time when it quasi-worked). I've read that using v2 fixes this issue, but I can't find a live copy anywhere, so I haven't been able to try it.
Rather than going for a completely new install every time I bork something, I made a backup just after I finished unlocking and rooting the phone. I just restore that backup after each attempt, and it goes back to working fine on the stock Android firmware (3.whatever).
Any ideas? I think I'll try starting completely from scratch again and not using RomManager tomorrow, but if anyone can point out my error before then and save me a lot of -- hopefully not wasted -- effort, it would be fantastic.
Cheers,
Vash
Click to expand...
Click to collapse
Use this recovery. http://forum.xda-developers.com/showthread.php?t=1218417
Or jokers at http://forum.jokersax.com/discussion/25/joker-recovery-for-the-photon-v3
I use the first link. Works perfect. Once you install the recovery. Wipe everything. Install 0.3.1. Boot into the system. Go back and flash the newest 0.7.0 update with gapps.
Should fix all the issues.
Sent from my SGH-I777 using XDA
Well, I got .3.1 working. Then tried to install .7 and it crapped itself again. Should I have cleared all the data/caches/etc. between the two?
Edit - I tried it again but this time cleared all the data between installs. It booted, but I got the same 'android.phone failed to start' message.
Edit 2 - Alright, I think I got it. I didn't clear anything between the two installs, but I installed each firmware twice without exiting recovery mode either time. It seems to be working (phone works, at least), although I'm not sure my 3G is working...
na7q said:
Use this recovery. http://forum.xda-developers.com/showthread.php?t=1218417
Or jokers at http://forum.jokersax.com/discussion/25/joker-recovery-for-the-photon-v3
I use the first link. Works perfect. Once you install the recovery. Wipe everything. Install 0.3.1. Boot into the system. Go back and flash the newest 0.7.0 update with gapps.
Should fix all the issues.
Sent from my SGH-I777 using XDA
Click to expand...
Click to collapse
Joker's recovery is a zip file you can flash from 5.0.2.8 if you don't feel like hooking up to the computer and using fastboot. But 5.0.2.8 doesn't work right to flash roms.
Sent from my MB855 using xda app-developers app
Aside from not being able to connect to any 3G networks (which is a problem...), it looks like it's working. Any ideas why 3G doesn't work now?
Thanks for the help thus far =)
vash265 said:
Aside from not being able to connect to any 3G networks (which is a problem...), it looks like it's working. Any ideas why 3G doesn't work now?
Thanks for the help thus far =)
Click to expand...
Click to collapse
Install 3.1, boot, reboot to recovery, wipe cache and dalvik, install 7.0, install gapps, boot.
Sent from my MB855 using xda app-developers app
Acvice said:
Install 3.1, boot, reboot to recovery, wipe cache and dalvik, install 7.0, install gapps, boot.
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
Yep...already did that and got it to boot just fine. Now I'm struggling with poor reception. I've seen other users (different phones) mention radio upgrades, but I was extremely unfamiliar with the terminology. The phone seems to work okay, but I only get 1x reception for data.
Or were you actually suggesting to repeat the entire process?
Edit - Tried again, still no luck with 3G.
vash265 said:
Yep...already did that and got it to boot just fine. Now I'm struggling with poor reception. I've seen other users (different phones) mention radio upgrades, but I was extremely unfamiliar with the terminology. The phone seems to work okay, but I only get 1x reception for data.
Or were you actually suggesting to repeat the entire process?
Edit - Tried again, still no luck with 3G.
Click to expand...
Click to collapse
Before doing what i stated did you wipe everything (system, data, cache, dalvik)? Also, you still getting a forceclose upon boot or just crap signal? And are you on sprint or electrify?
Acvice said:
Before doing what i stated did you wipe everything (system, data, cache, dalvik)? Also, you still getting a forceclose upon boot or just crap signal? And are you on sprint or electrify?
Click to expand...
Click to collapse
I wiped everything. I can boot into the OS and my phone works fine, but my data rate is stuck on 1x (so crap signal). I'm on sprint.
vash265 said:
I wiped everything. I can boot into the OS and my phone works fine, but my data rate is stuck on 1x (so crap signal). I'm on sprint.
Click to expand...
Click to collapse
well did you have 3g on stock? there's no reason it would go to 1x unless 3g is unavailable. the rom shouldn't cause it to go into 1x.
na7q said:
well did you have 3g on stock? there's no reason it would go to 1x unless 3g is unavailable. the rom shouldn't cause it to go into 1x.
Click to expand...
Click to collapse
Yep. Despite popular belief, I'm not a moron =) I'm in the dead center of 3G availability for Sprint in my area, and with stock android I get perfect 3G reception. I've read reports of the same things happening to other people, but haven't found a solution yet. I restored to stock after making a backup to try updating the PRL. I'll update again when I find out if it worked or not.
Edit - Sprint just sucks, apparently. http://www.sprintusers.com/forum/showthread.php?t=225908
When I rebooted to stock I checked the radio status and sure enough, 1xRTT. Evidently I am a moron =p
There was something wrong with the phone afterall. To fix it, I did the following:
Dial *#*#4636#*#*
You'll be presented with a menu. Go to Phone Information.
About halfway down the page, there will be a menu with a dropdown. Mine was set to CDMA. To fix the issue, I changed it to CDMA auto (PRL). I'm now receiving excellent 3G reception.
Hi guys,
I wonder if someone can help me with this... really annoying problem!
I was checking out various roms i downloaded here, started with 4.0 aokp which was great, then gave cyanogen 4.2 a try, but then i wanted to go back to Aokp 4.0 cause it seemed to run faster
Now first thing, i couldnt get rid of cyanogen (no offense intended) cause when i wiped all data, cache and dalvik it just took aokp a few seconds to install from CWM recov, that doesnt seem right, right?
Then installed GAPPS, but still it ran on Cyanogen
So, i did a NANDROID backup, which made my phone like before i started with all this..
THIS IS WHERE IT WENT WRONG?
now it just wont read my simcard
i tried my sim in my old phone and that works fine, so the problem is in my phone somehow
is it something about the radio settings specific to my phone and network?
how can i change these settings and are they specific for my provider?
you guys always helped me out so i hope you know what i mean..
kipdeontdekker said:
Hi guys,
I wonder if someone can help me with this... really annoying problem!
I was checking out various roms i downloaded here, started with 4.0 aokp which was great, then gave cyanogen 4.2 a try, but then i wanted to go back to Aokp 4.0 cause it seemed to run faster
Now first thing, i couldnt get rid of cyanogen (no offense intended) cause when i wiped all data, cache and dalvik it just took aokp a few seconds to install from CWM recov, that doesnt seem right, right?
Then installed GAPPS, but still it ran on Cyanogen
So, i did a NANDROID backup, which made my phone like before i started with all this..
THIS IS WHERE IT WENT WRONG?
now it just wont read my simcard
i tried my sim in my old phone and that works fine, so the problem is in my phone somehow
is it something about the radio settings specific to my phone and network?
how can i change these settings and are they specific for my provider?
you guys always helped me out so i hope you know what i mean..
Click to expand...
Click to collapse
I've exactly the same problem.
Are your wifi and BT still OK ?
Is your IMEI (*#06#) still the same as under the battery ?
Was your phone locked ? Did you buy it with a SIM ?
My problem appeared after flashing several different modems/RILS : I got no error warning anywhere, but after reboot, I completely lost my netwerk connection. (no voice calls , no mobile data)
At first I thought a bad RIL driver, so I restored my Nandroid backup from the day before (after wipe cache/wipe dalvik/format system), but still no connection with the netwerk. and can't even make voice calls.
Then I was in panic !
After this I did a complete factory reset, and wiped/formatted cache/dalvik/system/data/SD-card and went in to download mode. After loading a stock ELLA for my region using Odin, still no connection. I was also never asked to enter the PIN-code for my SIM to unlock it.
Damned, this is an embarrassing situation : I can't think of loosing my SG3 for several weeks if I have to send it to Samsung !!
Mu phone is bought without SIM, so it's not SIM-locked.
My Wifi and BT are still OK, my IMEI is also still OK.
Any other ideas, please ?
How do I come in the service mode for the Radio ?
This is the way my netwerk is indicated : a circle with a stripe, much like the famous traffic sign.
Its fixed
So i have no idea how it eventually got fixed but if someone else has this problem, heres what i did:
Full wipe/factory reset blablabla all that
Did Nandroid restore again, put the AOKP ROM and GAPPS back on my phone
Installed ROM which was I9300CEDLI1
Used Odin to install latest CWM, which was already on there, but still
Then booted into CWM and installed .zip of course
This still went suspiciously fast since the very first time it took way longer, that worried me but,
Installed GAPPS again,
Rebooted... IT ASKED FOR MY PIN NUMBER!! hell yes that was what i wanted!
So now it again sees my simcard in there, so now i can make calls end use intnet again!
Still i think it started after the nandroid backup for some reason, or it may have been because of wiping Dalvik Cache?
I have no idea if that even makes sense
kipdeontdekker said:
Its fixed
So i have no idea how it eventually got fixed but if someone else has this problem, heres what i did:
Full wipe/factory reset blablabla all that
Did Nandroid restore again, put the AOKP ROM and GAPPS back on my phone
Installed ROM which was I9300CEDLI1
Used Odin to install latest CWM, which was already on there, but still
Then booted into CWM and installed .zip of course
This still went suspiciously fast since the very first time it took way longer, that worried me but,
Installed GAPPS again,
Rebooted... IT ASKED FOR MY PIN NUMBER!! hell yes that was what i wanted!
So now it again sees my simcard in there, so now i can make calls end use intnet again!
Still i think it started after the nandroid backup for some reason, or it may have been because of wiping Dalvik Cache?
I have no idea if that even makes sense
Click to expand...
Click to collapse
Good to hear your problem is fixed !
I'm still not able to make voice calls or enable mobile data : "insert SIM card" is the message I get.
I did already twice a full reset/factory restore and flash a stock ROM using PC Odin, but no avail.
Today I did a restore from my EFS folder using a backup that a had made before the problem appeared, but no avail.
BTW, did you also have the same indication from network status as on my screen-shot ?
Any idea what else I can try ?
I'm getting desperate .....
I'm having the same trouble after doing backup in TWRP when boot up it doesn't recognize the sim card.
I've flash CM10.1 and it only work after i remove the card e put it back on.
Try to see if it something about the simcard.
Regards,
Rui
Would like some help. I have flashed CM 11 and can't make calls. It says mobile network not available. Tried flashing AOKP rom as well and same thing. Mobile data works fine, although i have gotten a popup twice that says 'Google Play Services not supported by your device, please contact your manufacturer' (no noticible issues from this, google stuff i've tried so far works). I have included a screenshot so you can see my baseband and rom version, etc.
Now, i had a great deal of trouble getting a rom flashed to start with, CWM put me into a bootloop and TWRP wouldn't flash anything because it said it couldn't mount /storage when i tried. Used Philz advanced CWM (love it btw, will be using it from now on). Still wouldnt flash the hltespr specific CM11 version so had to use the unified hlte version (it gave me the status 7 asserts issue, but editing the asserts out just gave me a bad file error when flashing). I wiped data/cache/dalvik between each flashing. I don't know if any of that would have bearing on this problem, just including any details i can. Any advice?
Verilin said:
Would like some help. I have flashed CM 11 and can't make calls. It says mobile network not available. Tried flashing AOKP rom as well and same thing. Mobile data works fine, although i have gotten a popup twice that says 'Google Play Services not supported by your device, please contact your manufacturer' (no noticible issues from this, google stuff i've tried so far works). I have included a screenshot so you can see my baseband and rom version, etc.
Now, i had a great deal of trouble getting a rom flashed to start with, CWM put me into a bootloop and TWRP wouldn't flash anything because it said it couldn't mount /storage when i tried. Used Philz advanced CWM (love it btw, will be using it from now on). Still wouldnt flash the hltespr specific CM11 version so had to use the unified hlte version (it gave me the status 7 asserts issue, but editing the asserts out just gave me a bad file error when flashing). I wiped data/cache/dalvik between each flashing. I don't know if any of that would have bearing on this problem, just including any details i can. Any advice?
Click to expand...
Click to collapse
Have you upgraded your bootloader to NH7? I know most of the newly-updated CM-based ROMs require you to be on NH7 before flashing. That's most-likely why you weren't able to flash the htlespr ROMs. The unified ROMs no longer include the correct APNs for Sprint, so that's why you don't get service on it. I don't know why mobile data works on it.
topherk said:
Have you upgraded your bootloader to NH7? I know most of the newly-updated CM-based ROMs require you to be on NH7 before flashing. That's most-likely why you weren't able to flash the htlespr ROMs. The unified ROMs no longer include the correct APNs for Sprint, so that's why you don't get service on it. I don't know why mobile data works on it.
Click to expand...
Click to collapse
No, didnt realize that i needed to do that. I'll do some research on it because i don't have any idea how to update the bootloader. If you have a link to a good tutorial that would be wonderful! Thanks!
Ok so i tried that, found this tutorial, followed it, no luck. Tried full wipe/reset after that to see if it would let me install the hltespr versions, still no dice. Same situation, mobile data works, calls don't. Will have to wait till daylight to try texting so i don't wake anyone up but i suspect that texting won't work either. Has anyone experienced this and fixed it? Lol i really didn't drop $100 on a phone to be saddled with all the Samsung and Sprint baloney that it comes with, don't wanna unroot....
Bump
Anyone have ideas on this? Have continued to try fooling around with the udater-script file to resolve the status 7 problem so I can install the hltespr variant, still no dice. Please someone help!
Bump!
Sorry, I typically don't have access to XDA forums on the weekend, so couldn't answer your question till now.
You flashed only the baseband/modem, not the Bootloader. If you want to update the Bootloader, you need to use ODIN to flash the Complete OTA NH7 Update.
In order to update the Bootloader, you need to make sure that you use the PC ODIN (not the mobile one) and that you completely power off the phone before you enter download mode (don't access download mode by using the extended power menu when shutting down the phone). I don't think you need to do the battery pull that Freeza had in his instructions (I didn't do it when I ODIN-flashed the NH7 OTA update), but it wouldn't hurt to do it.
Thanks for that, I will try it as soon as I get home tonight! The next thing I had decided to try was to unroot, to back to stock, then try flashing that before I start with the custom recovery and ROM. Do you think I should do that first before doing the whole thing or could that work just flashing that with my phone as-is?
Verilin said:
Thanks for that, I will try it as soon as I get home tonight! The next thing I had decided to try was to unroot, to back to stock, then try flashing that before I start with the custom recovery and ROM. Do you think I should do that first before doing the whole thing or could that work just flashing that with my phone as-is?
Click to expand...
Click to collapse
Well, I always recommend a full wipe (data, system, cache, dalvik) when flashing ROMs. I haven't wiped my internal storage or external storage since I got the phone, so that's not really necessary.
I don't think that unrooting your current ROM is necessary. Flashing the ODIN OTA update will automatically remove root access, so that's not an issue. Here's the steps I took when I updated to NH7 and installed my current ROM (see my sig):
Make a Nandroid backup.
I always do this just so I have a "record" of what I left behind. It also allows me to have all of my app data that I can restore via Titanium Backup (you have to buy the Pro version in order to restore specific apps from a Nandroid backup). I always store a copy on my ext. storage and on dropbox.
Do a full wipe
As I mentioned above, I always wipe data, system, and the caches when flashing ROMs. While I have to take some time to get the new ROM exactly as I like it, it minimizes any potential FCs and errors that some people get when dirty flashing.
Install NH7 all-in-one via ODIN
I installed the NH7 via ODIN. Please note that this is the fully stock, unrooted ROM and will also install the stock recovery.
Let the phone boot and connect to Sprint. Update Profile and PRL.
I do this periodically whenever I go back to stock (from AOSP). I rarely have connection issues, but updating the PRL an profile can help with those.
Install a custom recovery using ODIN.
My recovery of choice is TWRP, but others have found just as much success with CWM and Philz. Just make sure that you're installing the correct version of the recovery (4.4.X version, not the 4.2.X version). I always reboot to the main system after installing a recovery, but that's up to you. In the rest of this post, I'll say "TWRP," but I really mean "custom recovery."
[OPTIONAL] Make a Nandroid backup of the stock ROM
I always do this, but I recognize that it's not necessary, especially since we can just ODIN back to this image at any time. I just like having the option of having a stock backup on the device (in case catastrophe strikes while I'm away from a computer).
Use TWRP to flash your AOSP ROM of choice.
If you haven't installed any apps or messed around with the settings, you shouldn't have to wipe before flashing, but (in case you haven't noticed by now), I tend to err on the side of caution, specifically: wiping everything (data, system, and the caches) before I flash anything.
Set up the ROM how you like it and [OPTIONAL] make one last Nandroid Backup
Whenever I set up a new ROM to the exact way I like it (statusbar settings, accounts set up, apps installed and configured, etc), I make a nandroid backup of my device. This allows me to go back to that "fresh" image whenever something happens to the device and I don't have to muddle around fixing those minor tweaks. Again, I tend to err on the side of wiping the phone too often and taking too many backups, but I've rarely had issues with my phone and ROMs because of it (to the point where I can spend most of my XDA time helping others with their phones), so it might be prudent to follow the advice.
Anyways, that's how I upgraded to NH7 and installed a custom ROM. Others may take a less conservative approach and you're welcome to adjust any of the optional steps.
Hope this helps!
-Topher
OK, did all that successfully, when it went back to stock stiil had the same issue. Mobile data functions, mobile network for calls/SMS doesn't. Did the whole update prl/profile and even tried reactivating from settings, still nothing. Was able to install custom recovery (Philz) and the hltespr CM11 variant instead of the unified generic version. Still has the same problem, mobile network not available. Everything else works perfectly. I did verify in settings that it still wound up as the NH7 after everything I did. Note I did a full reset before each thing that got flashed in this process, and one more for good measure after. Let it boot to the system between steps too.
Lol I've been rooting and switching between ROMs for years and have never encountered anything like this. I'm stumped....
Verilin said:
OK, did all that successfully, when it went back to stock stiil had the same issue. Mobile data functions, mobile network for calls/SMS doesn't. Did the whole update prl/profile and even tried reactivating from settings, still nothing. Was able to install custom recovery (Philz) and the hltespr CM11 variant instead of the unified generic version. Still has the same problem, mobile network not available. Everything else works perfectly. I did verify in settings that it still wound up as the NH7 after everything I did. Note I did a full reset before each thing that got flashed in this process, and one more for good measure after. Let it boot to the system between steps too.
Lol I've been rooting and switching between ROMs for years and have never encountered anything like this. I'm stumped....
Click to expand...
Click to collapse
Dumb question but are you a Verizon customer or Sprint?
Sent from my SM-G900P using Tapatalk
Sprint, I've had big red before but when they did away with unlimited data it wasn't worth paying their high rates.
Bump!
Anyone have any ideas on this? I am just confounded as to why this continues even after being reset to stock.
Same Issue!!!
I have the exact same issue and have been trying to resolve it for the last 2 days... Did you find a solution?
I have the same problem on a Samsung Mega. LTE and 3G data work but phone won't dial if LTE is active. It WILL voice dial if only 3G is active. Sprint. CM11.
I had this problem after flashing ROMs as well, but went into Settings>Connections>More Networks>Mobile Networks>Network Mode and selected LTE/CDMA....no network had been selected. That fixed me right up. Weird part is, I could still avcess the web without WiFi....but couldn't make calls or ise my bluetooth headset until I had performed the above steps. Hope that helps.
thanks forget the little things reset wifi and sprint cell extender
GAPO said:
I had this problem after flashing ROMs as well, but went into Settings>Connections>More Networks>Mobile Networks>Network Mode and selected LTE/CDMA....no network had been selected. That fixed me right up. Weird part is, I could still avcess the web without WiFi....but couldn't make calls or ise my bluetooth headset until I had performed the above steps. Hope that helps.
Click to expand...
Click to collapse
I have just recently tried to install the official cm11 images for my g3. They worked fine. Then, when I installed gel x-posed settings and activated it, I would get said error. It would pop up again and again. This would lead me to reflash my ROM. Then, I do not know what happened, when I would flash a ROM, I would get the error from the start. I eventually fixed this error. But then, when I tried to upgrade the nightly, I got the error again. So I flashed the ROM again, and let it sit. After a little while of perfection, the error came back up!
Here's what I have tried:
-reflashing the boot.IMG (unzipped)
-clearing cache (recovery)
-clearing Sim tool cache/data (said they were non existent when trying)
-reflashing stock, then reflashing cm11
I really want cm11 on my g3, but with these issues, I don't know whether I can now.
Any help would be appreciated!
Sent from my Nexus 7 using XDA Free mobile app
CM Nightlies are working perfect for me with no errors. Here is the process I went through:
I am still using TWRP 2.8.0 which is the version I installed when I originally Bumped! my phone.
I downloaded CM and Gapps to root of my internal SD storage
I chose to Wipe in TWRP
I chose Advance Wipe
I picked every option except for Internal Storage and External SD Card/Storage
I then Wiped
Out of habit, I do this 3 times (don't ask why, I just do it from when I had older android devices)
I then go back to wipe main screen and slide to do the standard wipe, 3 times
Yes, this is probably overkill!
I then go to install in TWRP
I install CM, then I install gapps (using the gapps that are on this list: https://itvends.com/gapps/
Yes, the date of those gapps are a little older, but that is what worked for me per OP'S instructions
I went through setup of my phone, fixing APN, Setting WIFI to USA, signing into Google after first loading into Rom instead of signing into Google on first bootup. Did a reboot
Installed Xposed, and the modules needed, reboot
I never received any error
I have done 3 nightly updates so far, as of 11/30. I am sure 12/1 will be ready in an hour or so.
I always click on about phone, download said update and let the process do its thing automatically, walk away and the phone is ready to use
Still no errors whatsoever. In fact, this has been the first version of AOSP I have used for the G3 with 0 errors. It is perfect, for me - No issues.
Hope that helps.
mwest316 said:
CM Nightlies are working perfect for me with no errors. Here is the process I went through:
I am still using TWRP 2.8.0 which is the version I installed when I originally Bumped! my phone.
I downloaded CM and Gapps to root of my internal SD storage
I chose to Wipe in TWRP
I chose Advance Wipe
I picked every option except for Internal Storage and External SD Card/Storage
I then Wiped
Out of habit, I do this 3 times (don't ask why, I just do it from when I had older android devices)
I then go back to wipe main screen and slide to do the standard wipe, 3 times
Yes, this is probably overkill!
I then go to install in TWRP
I install CM, then I install gapps (using the gapps that are on this list:
Yes, the date of those gapps are a little older, but that is what worked for me per OP'S instructions
I went through setup of my phone, fixing APN, Setting WIFI to USA, signing into Google after first loading into Rom instead of signing into Google on first bootup. Did a reboot
Installed Xposed, and the modules needed, reboot
I never received any error
I have done 3 nightly updates so far, as of 11/30. I am sure 12/1 will be ready in an hour or so.
I always click on about phone, download said update and let the process do its thing automatically, walk away and the phone is ready to use
Still no errors whatsoever. In fact, this has been the first version of AOSP I have used for the G3 with 0 errors. It is perfect, for me - No issues.
Hope that helps.
Click to expand...
Click to collapse
I did everything exactly as you did, including the 3 wipes, also out of habit. I too however, get the same error with the latest nightly. It starts popping up as I try to add my Gmail account at the initial setup. Previously, the 'unofficial' builds did not do this to me. This is the only rom that does this, I have tried them all out. I have yet to try to flash a different gapps package to see if that makes a difference. Apparently I dont get the data issues with cm12, but get phone issues with cm11.
I'm a bit relieved to see I'm not the only one having this problem. Been updating every night to see if maybe it's fixed, but I still get the same error. Didn't happen on the first nightly I flashed, though. It lol seems to be happening at random for me. Sometimes I'll set my phone down for a couple hours, working perfectly fine. Then I pick it up to check something and I suddenly start getting that error. I've tried every "solution" I find and none of them work for me. Even thought it was an issue with reading my sim card because when I get the error, it shows that my sim card isn't being read. But I still get it when I take it out. A normal factory reset doesn't fix it either. I have to do a complete data format to remove the error.
I found a quick little fix where i make a backup earlier in the day and just restore it whenever I start getting the error, but it's still very annoying.
Same issue
Hey bros,
Same thing here. It's a baseband radio issue. Notice in settings under About Phone it says 'Baseband Version: Unknown'. Either TWRP is flashing over our baseband (not likely, calls and texts can be made before the error message attacks come), or CM11 has some issue on certain builds with reading our SIM cards. I think having an official 10B or 11C flashable baseband radio to install at the time of the ROM install will fix this problem. Waiting on CM to patch the code will take too long. Let me know if you find one of these basebands or can find out how to extract it (from file manager or somewhere?) as I have not been able to find this info on XDA or anywhere.
EDIT: I FIXED IT
I'm a new member, and XDA won't allow me to post links..... look in the OP for JasmineROM (all credit to author for posting this 11C modem and fabulous stock LG debloated ROM) under downloads, you'll find the 11C modem. Download it.
1. Place 11C modem.zip on external or internal, whichever you want. I prefer external.
In TWRP:
2. Backup, unless youre livin' life on the edge.
3. Wipe it all except for external (or internal, if you prefer to flash from your internal storage)
4. Add to Install zip que in order:
a) latest CM11 nightly
b) 11C modem found in JasmineROM OP of main thread
c) GAPPs of your choice (I like nano PA GAPPs, and just install whatever else i want after)
5. FLASH
6. profit
7. PHAP
I have heard the 10B radio works great too. holler back and post results between the 2 stock radios for VS985.
Please hit thanks, as I am new and want to be helpful, where possible. Please share this so others know that we can overcome this nonsense.
CM11!!! Phappin' so hard right now!
Got it again.... totally blowed right now. maybe reconfig APN to match VZW and it will work?
Thanks for all the responses, it currently seems that the problem is cm11. I will probably wait for a stable build. For now, I'm using an unofficial cm12 ROM. Thanks for all the help!
Sent from my LG-VS985 using XDA Free mobile app
8pscott said:
Thanks for all the responses, it currently seems that the problem is cm11. I will probably wait for a stable build. For now, I'm using an unofficial cm12 ROM. Thanks for all the help!
Sent from my LG-VS985 using XDA Free mobile app
Click to expand...
Click to collapse
Are you using that PA GAPPs package that's in alpha? I think i'm going to give up and go to 12 too... I do know that the first official nightly of CM11 doesn't give me any errors, but Trebuchet is so buggy it won't take widgets. Had to download Nova
It makes me cry. My phone lasted through the night. Woke up at around 7 and it was fine. Went back to sleep and woke up at around 8:30 and I was crushed to see the problem happening again. There doesn't seem to actually be anything thy triggers it. :/
Yeah I think I'm gonna just try out cm12 and see how that goes.
Double check to make sure the phone isn't running in art. That fixed my problems! Xposed and art do not work together!![emoji2]
Im getting the same error on my phone usually a few says after using any of the nightlies. When i go to make a phone call it gives me the force close and doesnt stop. Ive since moved back to stock hoping someone had more info on the issue. My phone was not using Art but I did have xposed installed.
Hello all.
New poster here, been coming here for some time though for the loads of great information and generally helpful people.
I'm having an issue with my Honor 5x, and I seem to be the only one i can find on this forum having this issue.
The issue that I am having is that I lose the ability to connect to the cellular networks (I am actually running dual-sim) when I load a custom ROM after the first reboot.. The first time this happened, it even lost the IMEI numbers (WTF). I restored from the backup I made, and tried again. I got the same result, after the first reboot, it can no longer find the cellular networks, and when i try to search for network providers, it gives me an error simply saying "Error searching for networks." Restore backup again, flash resurrection rom to see if maybe CM13 is just being stupid with my phone, got no signal right off the bat, and could not find networks.
At this point, I restored the stock recovery, and let it recover my phone to stock, which is where I am at the moment, since it works. Also noteworthy, that every time I restored from backup, the phone had no problems at all connecting to the cellular networks. as well, it never had an issue through all of this with connecting to WiFi.
Relevant Information:
Phone Model: KIW-L24
Build Number: KIW-L24C567B331
Emui Version: 4.0
Android Version: 6.01
Kernel Version: 3.10.49-g472a5b3
Location: United states
Carriers: Cricket, MetroPCS
Bootloader is unlocked
I have not restored root access
I have Flashed TWRP and made a full backup (again)
I'm getting the feeling that it is due to to something that I have forgotten, but I can't seem to think of anything.
Help?
So close, but no cigar.
Still having issues, here's what Ive done so far:
Restored phone completely to stock, leaving only an unlocked bootloader.
Loaded the latest version of TWRP
Re-Rooted the phone
Made a complete backup of the phone, with no partitions left unchecked, in case of a catastrophic failure
Used TWRP to wipe Dalvik/ART, Cache, System, & Data
Loaded the latest CM13 nightly build
Loaded GApps pico version (I don't use many of the Google apps, so I prefer to download the ones that I want)
Wiped Dalvik/ART
Rebooted Phone
At this point, the phone went about its first boot business, loading stuff in the background, optimizing apps for the first use.
I skipped almost all of the first-time setup stuff, no sense in setting it all up if it didn't work this time as well, but connected to WiFi, selected the primary SIM, and activated data on that SIM. This is all normal from my other attempts as well.
Rebooted the phone, when it came back up, I had signal on my phone, and it successfully sent and received messages.
Added my Google account, rebooted again, not getting signal. checked network operator settings, and I get the message stating "Error searching for networks" for both SIM cards.
Removed Google account, changed SElinux settings to permissive, soft reboot, no change.
In the past, I did try wiping Dalvik/ART & cache once this happened, but the only thing that changed is that it caused the process com.android.phone to crash on me repeatedly.
Currently digging around on the net some more to see if maybe there's something that I missed.
Try 1 Sim? Its some bug with dual sim i guess
I will try that when I get a chance, I am currently trying to restore the phone back to stock again after another failed attempt.
Also noteworthy, I had it completely lose the sim cards on me after a restore to the working stock backup that i made earlier in the day yesterday, I had to completely revert to stock (Restore stock recovery, let it rest the phone to stock) then the SIM cards started working again.
This is starting to get rather frustrating.
I'll keep you updated, as I've kinda decided to make this a log of sorts of my experience with this.
Hellspawn119 said:
I will try that when I get a chance, I am currently trying to restore the phone back to stock again after another failed attempt.
Also noteworthy, I had it completely lose the sim cards on me after a restore to the working stock backup that i made earlier in the day yesterday, I had to completely revert to stock (Restore stock recovery, let it rest the phone to stock) then the SIM cards started working again.
This is starting to get rather frustrating.
I'll keep you updated, as I've kinda decided to make this a log of sorts of my experience with this.
Click to expand...
Click to collapse
Did u fixed it? im having the same issue, although i dont have a backup.....
Tried updating to stock marshmallow first before installing CM?
stanley08 said:
Tried updating to stock marshmallow first before installing CM?
Click to expand...
Click to collapse
I tried that, see my thread http://forum.xda-developers.com/honor-5x/help/network-help-t3445510
i dont really know what to do, could the problem be MODEM.img???
Im having the exact same Issue, All roms loose the SIM card so I loose all signal and basically everything... a restart sometimes helps it, tried installing different ROMS, going back to STOCk 5.0.1 or 6.0.1 nothing Helps... NO clue what to do.
Same issue here. Happens on every Rom.
EDIT: Using KIW-L21 (UK)
Unlocked, single sim.
Maybe the it has something to do with modem.img