Flash Neo - Sony Ericsson Xperia Neo, Pro

Hey,
how and with what I have to flash the Xperia Neo CM10 to get shut on it?
I have a Unlocked Bootloader, I have root and I have CWM installed.
Every time I try to flash a Rom (wipe, factory reset, format system) while the installation works, but the phone will not boot. I just get a Loob. I play with FlashTools a new system, root and CWM is gone also.
Can someone please help me?

---

You have to flash the kernel inside the ROM first
Sent from my Dark Xperia neo V now Free

---

milanjm said:
You have to flash the kernel inside the ROM first
Sent from my Dark Xperia neo V now Free
Click to expand...
Click to collapse
Hey,
thanks for the reply.
So first the kernel, then the rest?
But in almost all of Rome is that you must also format the system. Then the kernel does not back away?
by this Rom:
http://forum.xda-developers.com/showthread.php?t=2111941
is, for example, that you should flash the kernel, then a floor-ROM without kernel. I've sucked and flashed me a ... then the kernel was gone.
I think at least that was gone, but the sign of the kernel did not.
I flashed so many phones, but I've never had such problems.

---

lolamarcel said:
Hey,
thanks for the reply.
So first the kernel, then the rest?
But in almost all of Rome is that you must also format the system. Then the kernel does not back away?
by this Rom:
http://forum.xda-developers.com/showthread.php?t=2111941
is, for example, that you should flash the kernel, then a floor-ROM without kernel. I've sucked and flashed me a ... then the kernel was gone.
I think at least that was gone, but the sign of the kernel did not.
I flashed so many phones, but I've never had such problems.
Click to expand...
Click to collapse
Hi,
In general the process is:
Extract the kernel from the ROM on your PC
Copy the ROM and GAPPS in your phone SDCARD
Flash the kernel (I'm using Flashtool, but there're other tools)
Boot into recovery
Do a factory reset, i.e. wipe data (this will format system, data, cache, etc.)
Install the ROM from the SDCARD
Install GAPPS from the SDCARD
Wipe dalvik cache
Reboot
This is the normal procedure. I have used it for all the ROMs I have installed and never had a problem.
I recommend you always to do a nandroid backup first. This way if something goes wrong you can flash the old kernel and do a recovery
Good luck

---

Hey,
I have the FUSION kernel installed.
I booted into CWM, factory reset did, wipe data, format system, format cache, format data (the last 3 things I must not do so?)
It is the FUSION logo, and then it is SUPER JELLY Bean. And it happens nothing. Was now over an hour away, and nothing left. Battery out, rebooted ... again the same.
I come now to the CWM no longer pure.

---

lolamarcel said:
Hey,
thanks for the reply.
So first the kernel, then the rest?
But in almost all of Rome is that you must also format the system. Then the kernel does not back away?
by this Rom:
http://forum.xda-developers.com/showthread.php?t=2111941
is, for example, that you should flash the kernel, then a floor-ROM without kernel. I've sucked and flashed me a ... then the kernel was gone.
I think at least that was gone, but the sign of the kernel did not.
I flashed so many phones, but I've never had such problems.
Click to expand...
Click to collapse
Kernel doesn't go when you format system... So do like how he said... Everything will be fine...
Sent from my Xperia Neo V using xda app-developers app

---

Attitude.SSJ said:
Kernel doesn't go when you format system... So do like how he said... Everything will be fine...
Sent from my Xperia Neo V using xda app-developers app
Click to expand...
Click to collapse
Hey,
So ....
Step by step.
- Using the Flash Tool to install the driver FUSION
- I go to the CWM
- Factory Reset
- Wipe Data
-from the SD card do I install Rome
- From the SD card to install the patch
- From the SD card to install the Gapps
- reboot
Fusion character comes SuperJellyBean appears ... but it did not happen.
It is here at the install instructions:
1. copy super jelly bean and gapps to sd card OK
2. flash any jb kernel for neov.. i recommend fusion kernel 4.3 , fxp or shardul's cm10 kernel..Fusion-Kernel...OK
fusion kernel for neo and neo v download from this thread - Fusion 4.3
also shardul seths cm10 kernel works great too here Shardul kernel
3. flash stock ics .587 ftf excluding kernel and simlock.ta files.. I find nothing to
4. boot into recovery ok
5.full wipesok
ie :
wipe data / factory reset ok
wipe cache partition ok
wipe dalvik cache ok
in mounts and storage , wipe system , data and cache there is not but wipe format. In format, the kernel is gone and the CWM also
6. flash Super Jelly Bean ok
8. only for neo (mt15i) users patch here posted below. ok
7.flash gapps : use this link : Gapps For SJB ok
8.flash wifi modules of respective kernel NO
9.reboot ok
10.enjoy not enjoy. Not loading

---

lolamarcel said:
Hey,
So ....
Step by step.
- Using the Flash Tool to install the driver FUSION
- I go to the CWM
- Factory Reset
- Wipe Data
-from the SD card do I install Rome
- From the SD card to install the patch
- From the SD card to install the Gapps
- reboot
Fusion character comes SuperJellyBean appears ... but it did not happen.
It is here at the install instructions:
1. copy super jelly bean and gapps to sd card OK
2. flash any jb kernel for neov.. i recommend fusion kernel 4.3 , fxp or shardul's cm10 kernel..Fusion-Kernel...OK
fusion kernel for neo and neo v download from this thread - Fusion 4.3
also shardul seths cm10 kernel works great too here Shardul kernel
3. flash stock ics .587 ftf excluding kernel and simlock.ta files.. I find nothing to
4. boot into recovery ok
5.full wipesok
ie :
wipe data / factory reset ok
wipe cache partition ok
wipe dalvik cache ok
in mounts and storage , wipe system , data and cache there is not but wipe format. In format, the kernel is gone and the CWM also
6. flash Super Jelly Bean ok
8. only for neo (mt15i) users patch here posted below. ok
7.flash gapps : use this link : Gapps For SJB ok
8.flash wifi modules of respective kernel NO
9.reboot ok
10.enjoy not enjoy. Not loading
Click to expand...
Click to collapse
I have not tried SJB, so I can only tell you the normal procedure.
Try with another JB ROM and follow the steps I explained to you. In general it's better to use the kernel inside the ROM. Open the ROM with any zip tool and extract the kernel (the boot.img file)
If it works, then try again with SJB.
BTW Fusion is a closed thread. Try with the latest release. It will be more stable (this I used in the past)

---

lolamarcel said:
Hey,
So ....
Step by step.
- Using the Flash Tool to install the driver FUSION
- I go to the CWM
- Factory Reset
- Wipe Data
-from the SD card do I install Rome
- From the SD card to install the patch
- From the SD card to install the Gapps
- reboot
Fusion character comes SuperJellyBean appears ... but it did not happen.
It is here at the install instructions:
1. copy super jelly bean and gapps to sd card OK
2. flash any jb kernel for neov.. i recommend fusion kernel 4.3 , fxp or shardul's cm10 kernel..Fusion-Kernel...OK
fusion kernel for neo and neo v download from this thread - Fusion 4.3
also shardul seths cm10 kernel works great too here Shardul kernel
3. flash stock ics .587 ftf excluding kernel and simlock.ta files.. I find nothing to
4. boot into recovery ok
5.full wipesok
ie :
wipe data / factory reset ok
wipe cache partition ok
wipe dalvik cache ok
in mounts and storage , wipe system , data and cache there is not but wipe format. In format, the kernel is gone and the CWM also
6. flash Super Jelly Bean ok
8. only for neo (mt15i) users patch here posted below. ok
7.flash gapps : use this link : Gapps For SJB ok
8.flash wifi modules of respective kernel NO
9.reboot ok
10.enjoy not enjoy. Not loading
Click to expand...
Click to collapse
Flash kernel... Go to recovery... Format system, format data, wipe cache, wipe dalvic cache.... Install Rom then...
Sent from my Xperia Neo V using xda app-developers app

---

Hey,
thanks for the replies and the help.
I did it step by step, I've tried other Roms. The phone did not start easy.
I have now pulled the CM10 and installed so as I know it and as it was described ... it worked right away.
Funny that it was not with the others.
The thing with the kernel I do not understand quite.
Your writing should I extract the kernel. But when I look purely at the Rome, I see no boot.img or the like.
Also, almost all of which any kernel you should write JP supported. I had the merger kernel, which is designed to support in any case and is also recommended for the above Rome.

---

lolamarcel said:
Hey,
So ....
Step by step.
- Using the Flash Tool to install the driver FUSION
- I go to the CWM
- Factory Reset
- Wipe Data
-from the SD card do I install Rome
- From the SD card to install the patch
- From the SD card to install the Gapps
- reboot
Fusion character comes SuperJellyBean appears ... but it did not happen.
It is here at the install instructions:
1. copy super jelly bean and gapps to sd card OK
2. flash any jb kernel for neov.. i recommend fusion kernel 4.3 , fxp or shardul's cm10 kernel..Fusion-Kernel...OK
fusion kernel for neo and neo v download from this thread - Fusion 4.3
also shardul seths cm10 kernel works great too here Shardul kernel
3. flash stock ics .587 ftf excluding kernel and simlock.ta files.. I find nothing to
4. boot into recovery ok
5.full wipesok
ie :
wipe data / factory reset ok
wipe cache partition ok
wipe dalvik cache ok
in mounts and storage , wipe system , data and cache there is not but wipe format. In format, the kernel is gone and the CWM also
6. flash Super Jelly Bean ok
8. only for neo (mt15i) users patch here posted below. ok
7.flash gapps : use this link : Gapps For SJB ok
8.flash wifi modules of respective kernel NO
9.reboot ok
10.enjoy not enjoy. Not loading
Click to expand...
Click to collapse
copy the SJB 6.0 in the SD card with the gaaps
Please connect the phone with the flash tool and flash the kernal (fusion )
then start the phone... press the menu button with the volume button .
delete the require , system, data cache ,dalvik cache
then install from ZIP and install SJB and then without rebotting install the gapps.
just download the fusion kernal , SJB and the gapps