Hello, I have i big problem. I want to install CM7, so i followed these instruction http://forum.xda-developers.com/showthread.php?t=1841904. I successfully instaled ClockWorkRec5830i.zip, but when i installed the second part of cwm it doesnt work. On the phone was "instalation aborted status 7". So i really dont know what i should doing. I was thinking about unlock bootloader, but i cant power on my phone. When the telefon starts, there is only screen with samsung logo and nothing else happen.
Samsung galaxy s 5830i.
Ace-i isn't bootloader locked. Try entering download mode (volume +, volume - and power buttons) and follow the steps in this thread: http://forum.xda-developers.com/showthread.php?t=1551156
Sent from my GT-S5830i using xda app-developers app
mathm2013 said:
Ace-i isn't bootloader locked. Try entering download mode (volume +, volume - and power buttons) and follow the steps in this thread: http://forum.xda-developers.com/showthread.php?t=1551156
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
It still doesnt working. I tried it, but the phone still writening "Instalation aborted status 7" I really dont know what i should doing. And if i start the downloading mode, the phone writtening - Downloading... Do not turn off target, but nothing else happen. I tried to connect with pc, but my notebook cant read the phone - even i install driver again.
RandaS said:
It still doesnt working. I tried it, but the phone still writening "Instalation aborted status 7" I really dont know what i should doing. And if i start the downloading mode, the phone writtening - Downloading... Do not turn off target, but nothing else happen. I tried to connect with pc, but my notebook cant read the phone - even i install driver again.
Click to expand...
Click to collapse
Did you install the samsung mobile usb drivers?
mathm2013 said:
Did you install the samsung mobile usb drivers?
Click to expand...
Click to collapse
I think yes, but i am not absollutely sure. If i connect any other Samsung mobile it connect immediately. Could you post the link for drivers? I want to make sure that i have rights drivers.
RandaS said:
I think yes, but i am not absollutely sure. If i connect any other Samsung mobile it connect immediately. Could you post the link for drivers? I want to make sure that i have rights drivers.
Click to expand...
Click to collapse
I use odin, and load the stock rom. Actually it was easy with YT video, but I appreciate your help and i am very grateful.
Related
When i first got my phone back from repair i wanted to use download mode to put the CWM in and flash it. But when i first did it it started a download process is it normal?
2.3.6
What download process exactly?
Sent from my GT-I9100 using xda premium
In the middle
" Downloading ....
Do not turn off target"
It has some writing on the top left too would you like to know what it says?
nothing is downlading...it by default shows like that...when you start download from ODIN you can see the WRITING PROCESS TIMELINE under that logo
Could you please elaborate how do you put the CWM in while on the Download mode
Yep, as above. That is download mode. Now your try to connect to Odin (kill lies first). Edit: kies not lies (stupid Swype)
Sent from my GT-I9100 using xda premium
Oh Im just following these instructions.
- Unzip the attached CF-Root-xxx-vX.X.zip
- (USB) Disconnect your phone from your computer
- Start ODIN
- Click the PDA button, and select CF-Root-xxx-vX.X.tar
- Put your phone in download mode
- (USB) Connect the phone to your computer
- Make sure repartition is NOT checked
- Click the START button
- Wait for the phone to reboot
Im sorry its just my first time doing anything like this xD
yes instruction is correct,
Make sure dirvers are installed, Kies to be killed,
once you connected the phone to PC (connect to mother board USB socket backside)
the ID:COM box will be highlighted in yellow, and in the message box you can see "added"
Good luck...
Do you kill kies first then go into download mode?
Renren1403 said:
Do you kill kies first then go into download mode?
Click to expand...
Click to collapse
doesnt matter
Thanks. So i made sure i had drivers for my phone. I go into download mode without phone in. I start ODIN on pc then plug it in (my phone that is) but the ID:COM doesnt change. Am i doing something wrong?
OVer: 1.85
Renren1403 said:
Thanks. So i made sure i had drivers for my phone. I go into download mode without phone in. I start ODIN on pc then plug it in (my phone that is) but the ID:COM doesnt change. Am i doing something wrong?
OVer: 1.85
Click to expand...
Click to collapse
Odin must identify your phone first like said above..
uninstall the Kies, download the latest version from Samsung install after a PC reboot, after install reboot PC, (kill means not unistall, close the applicaion, also check in your system tray)
Renren1403 said:
Thanks. So i made sure i had drivers for my phone. I go into download mode without phone in. I start ODIN on pc then plug it in (my phone that is) but the ID:COM doesnt change. Am i doing something wrong?
OVer: 1.85
Click to expand...
Click to collapse
Ensure USB debugging is on (checked) on settings first so Odin well recognise.
Sent from my GT-I9100 using xda premium
Thank you that was the missing piece! Kies for PC lol! So how do i know if my phone was successfully rooted?
UpInTheAir said:
Ensure USB debugging is on (checked) on settings first so Odin well recognise.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I dont think i had debugging on. How do i know if its on?
Renren1403 said:
Thank you that was the missing piece! Kies for PC lol! So how do i know if my phone was successfully rooted?
I dont think i had debugging on. How do i know if its on?
Click to expand...
Click to collapse
if you have successfully flashed correct CF-root from ODIN, thats it, next is your duty to google for rooted applications.....
@ UpInTheAir : for my knowledge if I am not correct,
Download mod itself is a debugging mode, not essenstial to do it from Menu...
the people who did not enable the debugging mod and bricked the phone or stuck on boot logo have been flashing ROMs by enterin into download mod without any treble...
@ZACQ8
Thanks i installed a custom rom now and its working fine and dandy.
One last question. Could you point me to where i can find how to check flash counter and reset it? and re flashing stock roms increase flash counter? or really how do i get everything ready so i can return my phone to repair if the time calls?
Renren1403 said:
@ZACQ8
Thanks i installed a custom rom now and its working fine and dandy.
One last question. Could you point me to where i can find how to check flash counter and reset it? and re flashing stock roms increase flash counter? or really how do i get everything ready so i can return my phone to repair if the time calls?
Click to expand...
Click to collapse
to reset counter you need a Jig and old bootloader to flash, if the current one is new...
I will just borrow Mistahbungle's posts here dont forget to thank him..
http://forum.xda-developers.com/showpost.php?p=25124275&postcount=16
http://forum.xda-developers.com/showpost.php?p=25123832&postcount=13
Thanks so much
ZACQ8 said:
if you have successfully flashed correct CF-root from ODIN, thats it, next is your duty to google for rooted applications.....
@ UpInTheAir : for my knowledge if I am not correct,
Download mod itself is a debugging mode, not essenstial to do it from Menu...
the people who did not enable the debugging mod and bricked the phone or stuck on boot logo have been flashing ROMs by enterin into download mod without any treble...
Click to expand...
Click to collapse
Yes, you are correct thanks. Not much sleep lately
You need USB debugging for ADB commands .... Except for ADB when in recovery mode
Sent from my GT-P6810 using xda premium
hello people.
i was trying to flash the kernel from ics 4.0.4 . first i connected it to the computer to flash it from odin. the green thing that was supposed to show up in odin didnt show up. me being dumb, i clicked start on odin for the heck of it. on odin it said fail. on my player there was this weird symbol.
i tried taking out the bettery and then i waited a few seconds. then i turned it on and the same symbol was there. i also tried going into download mode but when i tried it just showed the weird symbol and then turned black and again and again. i also tried going in to recovery which also did the same kind of thing. (bootlooping) . so has anyone experienced this before.
device info:
samsung galaxy player 4.0 (usa version)
terrasilent kernel
rooted
running icyfusion.
any help would be apperciated!
Its basically the same thing as the Download Mode sign. Don't worry about the awkward symbol, just means you are in download mode
Sent from my YP-G70 using xda app-developers app
EcHoFiiVe said:
Its basically the same thing as the Download Mode sign. Don't worry about the awkward symbol, just means you are in download mode
Sent from my YP-G70 using xda app-developers app
Click to expand...
Click to collapse
Its not in download mode though, i TRY turn it off (which I cant cuz the same thing shows again and again.)
ABSOLUTELY no way to turn it on. -.-
the playa! said:
Its not in download mode though, i TRY turn it off (which I cant cuz the same thing shows again and again.)
ABSOLUTELY no way to turn it on. -.-
Click to expand...
Click to collapse
He said that it's the same as download mode. For your information this mode is a forced download mode which means that you need to flash something to get over it. In this case a new kernel.
zaclimon said:
He said that it's the same as download mode. For your information this mode is a forced download mode which means that you need to flash something to get over it. In this case a new kernel.
Click to expand...
Click to collapse
oh im sorry i didnt understand what he meant. but for some weird reason my computer makes the noise but it doesnt show anything as connected... not even unknown device or something. do you guyd have any idea how i could fix this?
the playa! said:
oh im sorry i didnt understand what he meant. but for some weird reason my computer makes the noise but it doesnt show anything as connected... not even unknown device or something. do you guyd have any idea how i could fix this?
Click to expand...
Click to collapse
Try these:
1. Be sure to have anything Kies related not running [as a process] in the background (Task Manager alt+ctrl+delete on your computer)
2. Restart your computer and try the same usb port again (Kies process closed again).
3. Try a different USB port.
4. Try a different usb cord (I have over 4 in my home due to phones).
5. Try a different computer (I have two in my home).
Flash your kernal again as this is usually the case the phone dash exclamation sign icon comes up, odin of course.
da1writer said:
Try these:
1. Be sure to have anything Kies related not running [as a process] in the background (Task Manager alt+ctrl+delete on your computer)
2. Restart your computer and try the same usb port again (Kies process closed again).
3. Try a different USB port.
4. Try a different usb cord (I have over 4 in my home due to phones).
5. Try a different computer (I have two in my home).
Flash your kernal again as this is usually the case the phone dash exclamation sign icon comes up, odin of course.
Click to expand...
Click to collapse
the "forced download mode" sign comes even when the player is not connected to the computer, but I will look at this.
the playa! said:
the "forced download mode" sign comes even when the player is not connected to the computer, but I will look at this.
Click to expand...
Click to collapse
nothing is working.
i think its bricked.
the playa! said:
nothing is working.
i think its bricked.
Click to expand...
Click to collapse
Have you tried flashing back to stock? There is a guide in how to do it, don't do it the odin way - it's too unstable and unpredictable. Flash back to stock with heimdell. Click on my name and you should find my recent past posts (6 to 10 most recent) explaining how to flash back to stock with heimdell.
da1writer said:
Have you tried flashing back to stock? There is a guide in how to do it, don't do it the odin way - it's too unstable and unpredictable. Flash back to stock with heimdell. Click on my name and you should find my recent past posts (6 to 10 most recent) explaining how to flash back to stock with heimdell.
Click to expand...
Click to collapse
i dont think heimdall recognizes it either.
but i will look into your instructions so im sure that i didnt miss anything out.
I ran into this once. What fixed it for me was doing
heimdall close-pc-screen
Click to expand...
Click to collapse
Thanks guys,
its been a while but my laptop DOEST NOT recognize my player when I plug it in my laptop. I uninstalled the drivers and when I try to install the drivers, I get error 10. KIES does not resolve the issue either. Any ideas how to make the laptop recognize the player?
By the way, I tried every USB port.
the playa! said:
Thanks guys,
its been a while but my laptop DOEST NOT recognize my player when I plug it in my laptop. I uninstalled the drivers and when I try to install the drivers, I get error 10. KIES does not resolve the issue either. Any ideas how to make the laptop recognize the player?
By the way, I tried every USB port.
Click to expand...
Click to collapse
uninstall, reboot, re-download drivers, reinstall
also, does you player recognize when it is plugged in? (ie it shows usb connected)
iurnait said:
uninstall, reboot, re-download drivers, reinstall
also, does you player recognize when it is plugged in? (ie it shows usb connected)
Click to expand...
Click to collapse
by reboot u mean the laptop right? And then reinstall the drivers? And the player charges but it says USB Device Not Recognized.
the playa! said:
by reboot u mean the laptop right? And then reinstall the drivers? And the player charges but it says USB Device Not Recognized.
Click to expand...
Click to collapse
put device in download mode
plug into computer
run zadig.exe
options --> list all devices
then in the menu of devices click samsung usb composite device
install driver
in heimdall you wont be able to tell if heimdall recognizes it or not.
this is hiemdall when you first start it up
this should be heimdall when youve added everything in.
now all you have to do is hit start
also both of these pics have comments that will help you. good idea to look at them. also feel free to comment
Sent from my YP-G1 using xda app-developers app
goldflame09 said:
put device in download mode
plug into computer
run zadig.exe
options --> list all devices
then in the menu of devices click samsung usb composite device
install driver
in heimdall you wont be able to tell if heimdall recognizes it or not.
this is hiemdall when you first start it up
this should be heimdall when youve added everything in.
now all you have to do is hit start
also both of these pics have comments that will help you. good idea to look at them. also feel free to comment
Sent from my YP-G1 using xda app-developers app
Click to expand...
Click to collapse
I did all of that but i can't seem to click start... Even th ready button is grey and says 0%
:/
So i tried to flash Erigyts custom/stock rom with root (ZCKPA, 2.3.6) from XXKPF (2.3.5). I didnt find root for the rom, so i thought i could flash a pre-rooted rom. Odin failed, and i soft bricked the device. Im unable to boot into download mode. With my galaxy s i would take out the battery and leave it a while, and then boot into download mode and flash with odin. But i cant take out the players battery. It's like glued with the motherboard?
So i thought i could let the battery die and then charge it a bit and boot into download mode. But every time i plug in the charger/computer cable, it boots up to the softbrick screen. Ive tried very many combos, but cant figure out how to boot it into download mode. My computer/odin doesn't recognize the device.
i have no access to a jig at all.
And the phone does charge(i think).
HEEEELPPPPP!!!!!!!!
update: Ok so i figured out how to disconnect the battery. I did but it dont want to boot into download mode. It still goes to softbrick screen when i connect it to a charger/computer.
NamNamNom said:
So i tried to flash Erigyts custom/stock rom with root (ZCKPA, 2.3.6) from XXKPF (2.3.5). I didnt find root for the rom, so i thought i could flash a pre-rooted rom. Odin failed, and i soft bricked the device. Im unable to boot into download mode. With my galaxy s i would take out the battery and leave it a while, and then boot into download mode and flash with odin. But i cant take out the players battery. It's like glued with the motherboard?
So i thought i could let the battery die and then charge it a bit and boot into download mode. But every time i plug in the charger/computer cable, it boots up to the softbrick screen. Ive tried very many combos, but cant figure out how to boot it into download mode. My computer/odin doesn't recognize the device.
i have no access to a jig at all.
And the phone does charge(i think).
HEEEELPPPPP!!!!!!!!
update: Ok so i figured out how to disconnect the battery. I did but it dont want to boot into download mode. It still goes to softbrick screen when i connect it to a charger/computer.
Click to expand...
Click to collapse
If you see phone -- ! -- computer, that is download mode.
Mevordel said:
If you see phone -- ! -- computer, that is download mode.
Click to expand...
Click to collapse
But my computer doesnt recognize it, It says "unkown device". I read somewhere that it is force download mode
NamNamNom said:
But my computer doesnt recognize it, It says "unkown device". I read somewhere that it is force download mode
Click to expand...
Click to collapse
That means to get out of it, you need to re-flash what you were trying to flash earlier.
Mevordel said:
That means to get out of it, you need to re-flash what you were trying to flash earlier.
Click to expand...
Click to collapse
How can i do that if im unable connect the device? Please help im desperate here ((((
Instead of flashing with odin. Flash with Hemidall.
You need to have all the drivers
Sent from my Nexus 7 using xda app-developers app
DZonikg said:
You need to have all the drivers
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
I have the mobile usb drivers... do i need more?
obscuresword said:
Instead of flashing with odin. Flash with Hemidall.
Click to expand...
Click to collapse
I downloaded heimdall and started Zadig. But it doesnt say Samsung USB Composite Device- it says unknown device, like my computer.
NamNamNom said:
I have the mobile usb drivers... do i need more?
Click to expand...
Click to collapse
Did you install kiess..also try on another computer..sometimes drivers got mess up..happend me few times.
Sent from my Nexus 7 using xda app-developers app
Thanks
Thanks guys for the help. I just plugged it in the computer and it worked magically. I flashed md5 file and not tar file this time with odin and now it works...
For all people who may have waited for a solution... I'm sorry i cant help, It just worked.
Please, don't spam
Sent from my YP-G70 using xda app-developers app
So i was attempting to originally run a firmware through odin and had auto reboot checked when i shouldnt have.
I now have a tablet that boots up with a back light screen and functions as a normal tablet, but i now have a blank recovery
and i cannot use download mode anymore. ive tried drivers, different computer, the works. No recognition in download mode.
i do not have root and am running 4.0.4
please help :X
Hmmm.
Auto reboot shouldn't have damaged anything in particular. Its exactly as it says - whether you want the tablet to reboot after you've finished flashing a rom.
Just a few questions so that we can help you easier,
-What do you mean by a blank recovery?
-Does the tablet charge via AC? That'll determine whether it is a cable problem or whether it is something else.
Sent from my GT-P7510 using Tapatalk
Yes the tablet charges by cable. If I choose recovery option I get a back lit black screen, download mode completely unrecognizable. Currently only boots into standard android.
Sent from my LG-LS970 using xda app-developers app
younggunner said:
Yes the tablet charges by cable. If I choose recovery option I get a back lit black screen, download mode completely unrecognizable. Currently only boots into standard android.
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
If u mean that u can go into download mode but can't get a PC to see the device.... I would uninstall the drivers and Odin..reboot PC and reinstall drivers and Odin. Then try. If that doesn't work try a different version of Odin and/or drivers.
I have a Q and A thread with the necessary Odin files and cwm recovery to root the p7510...there is also a link to a qbking77 video.
Good luck...
My problem is I've tried different PCs drivers and Odin files and my tablet still only says waiting for cable in download mode
Sent from my LG-LS970 using xda app-developers app
younggunner said:
My problem is I've tried different PCs drivers and Odin files and my tablet still only says waiting for cable in download mode
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
how about a different cable and keep trying different usb ports on the same computer..
Unfortunately I've tried that as well
younggunner said:
Unfortunately I've tried that as well
Click to expand...
Click to collapse
well then we're down to the old battery drain trick....its been awhile since ive had to tell somebody how to do this....so give me until tomorrow night and ill see if i can find some good links to guides for you...
in the mean time you can google battery drain, bootloader, download mode and just about every other word combination you can think of for this method.....
..... which is to drain the battery to absolute zero...take it out...put it back in...plug the device in...and before the charging screen comes on you need to boot into the bootloader...
i know...sounds crazy,but ive seen it work time and time again...now those werent the exact steps...but i thougbt you would .eed atleast some sort of over view if you are going to go google hunting with me..lol
Same problem
I've the same problem. I'm trying to install Android in a Samsung Galaxy Tab 10.1 and the download mode has "waiting for usb cable". Odin doesn't recognize it, adb doesn't either. The tablet doesn't have an OS. Tried several usb cables, computers. It doesn't have an sd card slot to install from there.
I'm really at lost here , please help
Dont know how i turn in this situation.
I tried to root it, and did almost everything to turn back to the original OS, but cant find any resolve..
The recovery mode is the CWM.. what should i do? Do i need new data?..
Please someone, HELP!!
Any help please??
I'm sorry for you. I think at this moment, you have to wait since this tablet is too new.
Sent from my SGP312 using Tapatalk
---------- Post added at 12:51 AM ---------- Previous post was at 12:50 AM ----------
ngvuanh said:
I'm sorry for you. I think at this moment, you have to wait since this tablet is too new and you don't need to ask the same question for several times.
Sent from my SGP312 using Tapatalk
Click to expand...
Click to collapse
Sent from my SGP312 using Tapatalk
Even the "helpers" seem to have no clue...
Bagiz, you must hard-reset the device and flash a FTF. Then it will work again.
How this is done has been mentioned numerous times on xda and elsewhere on the net, no need to repeat it again and again for each brickflasher.
hasenbein1966 said:
Even the "helpers" seem to have no clue...
Bagiz, you must hard-reset the device and flash a FTF. Then it will work again.
How this is done has been mentioned numerous times on xda and elsewhere on the net, no need to repeat it again and again for each brickflasher.
Click to expand...
Click to collapse
I tried to flash with FTF file via Flashtool, the flash seem like nor reconize my device.. in the log is "device is disconnected"
I saw somebody in youtube revive his phone via CMD with 3 .img files: boot, recovery and system (i think)
But i cant find such files in the net for my tablet..
*rolling eyes* You must first start the tablet in flash mode (turn off, Vol down, then connect USB, then LED should be blue)...
hasenbein1966 said:
*rolling eyes* You must first start the tablet in flash mode (turn off, Vol down, then connect USB, then LED should be blue)...
Click to expand...
Click to collapse
...i did it.. i know im stupid but not that much..
Still, "device is disconnected" or something like that..
bagiz010 said:
...i did it.. i know im stupid but not that much..
Still, "device is disconnected" or something like that..
Click to expand...
Click to collapse
Are you using the right flashtool? this one:
http://www.flashtool.net/index.php
And ftf files are flashed in flashmode. Same steps as fastboot, but with volume down instead.
You must also install drivers for the tablet on your Windows PC... *twiddling thumbs*...
Ok thanks ill try it when i come home