My note 3 will only boot to the samsung note logo and keeps looping back to it with out anything else. i tried stock rom and reset but nothing works. is the phone bricked and can i get a replacement.
Did you update your firmware before flashing any ROMS?
Sent from my SM-N900P using Tapatalk 4
nolimit06 said:
Did you update your firmware before flashing any ROMS?
Sent from my SM-N900P using Tapatalk 4
Click to expand...
Click to collapse
No i was on the MI3 stock
ruffes21 said:
No i was on the MI3 stock
Click to expand...
Click to collapse
Try using ODIN and flashing the stock tar file. That should set you straight. You should be able to find what you need in the Android Dev section. If you are new to ODIN, open the app on your pc, click PDA, find the stock tar file, ensure "repartition" is unchecked and hit start. That should get you back to 100% stock. Do any applicable system updates and attempt the root process again. If you have any troubles look for qbking77's Note 3 root guide. Good luck. If all else fails I'd try a return and hope they don't know how to check for the flash flags.
Sent from my SM-N900P using Tapatalk 4
nolimit06 said:
Try using ODIN and flashing the stock tar file. That should set you straight. You should be able to find what you need in the Android Dev section. If you are new to ODIN, open the app on your pc, click PDA, find the stock tar file, ensure "repartition" is unchecked and hit start. That should get you back to 100% stock. Do any applicable system updates and attempt the root process again. If you have any troubles look for qbking77's Note 3 root guide. Good luck. If all else fails I'd try a return and hope they don't know how to check for the flash flags.
Sent from my SM-N900P using Tapatalk 4
Click to expand...
Click to collapse
Tried flashing stock tar, didn't work. i'm going to end up going to sprint tomorrow and see what happens.
ruffes21 said:
Tried flashing stock tar, didn't work. i'm going to end up going to sprint tomorrow and see what happens.
Click to expand...
Click to collapse
Someone found a way to fix the galaxy 3's soft brick problem that was like this over at http://forum.xda-developers.com/showthread.php?t=1840030 I'm hoping someone creates those files for the Note3 so I can try it.
ruffes21 said:
Tried flashing stock tar, didn't work. i'm going to end up going to sprint tomorrow and see what happens.
Click to expand...
Click to collapse
I had the same problem, flash CF-Auto-Root again
this happened on my 2nd day with my new note 3. had to exchange it. There was no way to fix it.
I had the same problem but I was able to get my phone to boot into recovery. I did a wipe data/factory reset and it worked afterwards.
Sent from my SM-N900P using Tapatalk
update
factory reset and reflash didnt work. exchanged at sprint, rooted new phone and everything is working fine:laugh:
Bricked note 3/help
Tried to root my NOTE 3 through Odin and instructions here and is bricked stuck at the screen below.. Anyone can help or recommend a repair place in NYC?
I had the same problem, except my problem was when I tried to restore nandroid back up....the root, and flashing of the rom went well.
I went to restore my nandroid back up, and it started bootlooping. This was the 2nd time this issue occurred, the first time downloading the tar resolved it. The second time it did not.
Nice dude..glad all worked out!
Sent from my SM-N900P using xda app-developers app
krios66 said:
Tried to root my NOTE 3 through Odin and instructions here and is bricked stuck at the screen below.. Anyone can help or recommend a repair place in NYC?
Click to expand...
Click to collapse
I can help you if you still need it
solved it by accident
Thanks so much for your reply and availability to help but after some hours of despair I read somewhere that Kies would be help and fiddled with the settings a bit and realized that I could download and restore factory settings through the software... Such a relief not ending up with a $800 paperweight!!! (and tought me a lesson not to trust just about any rooting direction posted here!!!)
krios66 said:
Thanks so much for your reply and availability to help but after some hours of despair I read somewhere that Kies would be help and fiddled with the settings a bit and realized that I could download and restore factory settings through the software... Such a relief not ending up with a $800 paperweight!!! (and tought me a lesson not to trust just about any rooting direction posted here!!!)
Click to expand...
Click to collapse
How do i get to this software if im stuck in bootloop...I tried everything and nothing has wurked...Tell me how i can get into Kies and do this if u please...???
ronny71 said:
How do i get to this software if im stuck in bootloop...I tried everything and nothing has wurked...Tell me how i can get into Kies and do this if u please...???
Click to expand...
Click to collapse
As I'm on a Mac will try to reconstruct the scene
On Kies go to Tools and choose Firmware Upgrade and Initialization
After some prompts for inputing first the Model number and the S/N, Kies will start downloading the software and will prompt you when to connect your phone..
Very easy....
krios66 said:
As I'm on a Mac will try to reconstruct the scene
On Kies go to Tools and choose Firmware Upgrade and Initialization
After some prompts for inputing first the Model number and the S/N, Kies will start downloading the software and will prompt you when to connect your phone..
Very easy....
Click to expand...
Click to collapse
Where did you find the serial number? The numbers on the box and under the battery don't work for me so I can't get past that screen.
Trahloc said:
Where did you find the serial number? The numbers on the box and under the battery don't work for me so I can't get past that screen.
Click to expand...
Click to collapse
Well, that's exactly what I used what was below the battery and the box... without those you can't really move forward... does it give you an error when you log in with those?
krios66 said:
Well, that's exactly what I used what was below the battery and the box... without those you can't really move forward... does it give you an error when you log in with those?
Click to expand...
Click to collapse
Yeah says they're invalid serial numbers. I asked a buddy of mine to give me his numbers and I get the same error with his. I did the DEC number as both full XXXXXXXXXXXXX and XXX XXX XXX XXX etc ...
Neither work. Also tried with HEX. Guess I'm just seriously SOL.
Related
I dont't see odin or download in the phone at all. Just connect to Kies. Is my phone bricked? Can it be restored? If it can be restored, can someone lead into the right direction? I was trying to restore the phone and my power went out for 10 min and now it's back on
If you haven't shut off the phone you should be able to load it back up in Odin desktop and start over. Can you get into download mode?
Sent from my SGH-I777 using xda premium
thanitos said:
If you haven't shut off the phone you should be able to load it back up in Odin desktop and start over. Can you get into download mode?
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
when I plug in Odin, I get the yellow bar 0:[COM4] but nothing happens, i gets stuck on boot.bin. and nothing is on the display except for the firmware upgrade encountered..blah blah
BROKKANIC said:
http://forum.xda-developers.com/showthread.php?t=1286432
http://forum.xda-developers.com/showthread.php?t=1313659
Read it and follow the instructions.
Make sure you click the Thanks button for entropy and creepyncrawly
Click to expand...
Click to collapse
Sent from my SGH-I777 using xda premium
i tried and tried and tried. i just took it to att and was able to exchange for a new one through warranty
alee821 said:
i tried and tried and tried. i just took it to att and was able to exchange for a new one through warranty
Click to expand...
Click to collapse
Please don't root or mod that new phone unless you read before you do. You don't belong Modding a phone
Sent from my SGH-I777 using xda premium
Lol. I couldn't figure out how to make my phone do what I wanted so I returned it for a new one that I still won't be able to figure out how to make do what i want because I don't wanna learn just give me cool shizz naoww!
The problem wasn't your phone. It was a kies / driver / USB port problem, lots of people are experiencing the same thing. But I agree with the above poster, please don't modify the new one. If THIS was something you're willing to return it for, imagine if u had an actual problem.
Sent from my Nexus 7 using Tapatalk 2
This guy is as bad as moneyover
Sent from my SGH-I777 using Tapatalk 2
alee821 said:
I dont't see odin or download in the phone at all. Just connect to Kies. Is my phone bricked? Can it be restored? If it can be restored, can someone lead into the right direction? I was trying to restore the phone and my power went out for 10 min and now it's back on
Click to expand...
Click to collapse
Try installing Samsung Kies http://www.google.com/url?sa=t&rct=...Hsxw4ptEdLDgjmDtA&sig2=s2Ik_zAvbYl1EZ28DFGk_A
then pop off your battery and get your Model and serial (NOT IMEI!) numbers and write them down.
in kies click on tools>emergency firmaware recovery a window should popup
boot your device into download mode
on the "emergency fw recovery window" should show your device... it will ask for your SN and model, input them as it shows on the back of your device. It will then install the latest Samsung FW (ICS).
worked for me when i got mine to the point odin wasnt working.
Stock SGH-I777 "Firmware upgrade encountered an issue"
My phone froze and when I tried to boot it back up it showed "Firmware upgrade encountered an issue". I'm running a stock jellybean rom so I tried emergency recovery with kies and it gets stuck at "Proceed to firmware emergency recovery" at 0%. I have tried using different usb cables, ports and even different pc's. I also reinstalled all the drivers properly. I tried flashing a stock rom using odin but it always fails. I can go into download mode but not recovery mode. I looked at many threads and the common course of action is to flash with odin. I have tried numerous times with different methods and it still won't get fixed. Please help. Thanks in advance and I apologise if this question is getting old but I am stumped.
note: before this happened the phone was working perfectly fine. I was running a stock rom and no root
@csgo0013,
creepyncrawly said:
Did you follow all of these steps in order? If not, go through this sequence again, from 1 through 6.
Click to expand...
Click to collapse
Flashing the kernel
Thanks @cyril279. I tried it again with no luck. Flashing the kernel failed. And now it shows that the current binary is now custom. It was official before. And also the binary counter went from 1 to 3. IDK if that helps at all
The increased binary counter is likely the result of attempts to flash the Siyah (non-stock) kernel. I was unaware that it would notch the counter if the flash was NOT successful.
Assuming that you followed the steps thoroughly, in their correct order, and using the correct firmware for the exercise, (siyah kernel and SBL.bin) then I am left to assume, as the post states, that your eMMC memory is damaged.
I have not had much experience with damaged eMMC memory, so perhaps our peers can chime in with other options that may be available to verify the condition of the device.
creepyncrawly said:
Try the following, just in case the problem is nand r/w corruption.
[...the six steps...]
If you are unable to get any of these to flash successfully, first you should assume a bad port, or bad cable, and try other ports, other cables, even another pc. If you can get no flash to succeed, then you may have damaged eMMC memory.
In case it is damaged memory, see this post from Mobile Tech Videos.
Click to expand...
Click to collapse
csgo0013 said:
Thanks @cyril279. I tried it again with no luck. Flashing the kernel failed. And now it shows that the current binary is now custom. It was official before. And also the binary counter went from 1 to 3. IDK if that helps at all
Click to expand...
Click to collapse
Can Odin be used more than once? I am getting a message with yellow triangle and can only boot phone into Odin. I cannot seem to find a working valid MD5 file either to restore stock.the one posted here seems invalid when checked by Odin.I was going to reflash beans106 build 1 since that seems to be my only option.i wonder how verizon would like me showing up with a phone to reflash.
Anyone I am stuck
Thanks
NB2A said:
Can Odin be used more than once? I am getting a message with yellow triangle and can only boot phone into Odin. I cannot seem to find a working valid MD5 file either to restore stock.the one posted here seems invalid when checked by Odin.I was going to reflash beans106 build 1 since that seems to be my only option.i wonder how verizon would like me showing up with a phone to reflash.
Anyone I am stuck
Thanks
Click to expand...
Click to collapse
You should be able to use Odin multiple times! over and over. If you go to Verizon they will laugh at you
Sent from my SCH-I605 using xda app-developers app
gowansta said:
You should be able to use Odin multiple times! over and over. If you go to Verizon they will laugh at you
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Thanks I keep reading threads that say only use stock roms for Odin after you loaded a custom rom.
I am screwed at this point now anyway not being able to even load current beanstown verson 1 in phone anyway.
Guess a totally bricked phone is all that is left to do then they can have a real good laugh.
Your phone is soft-bricked??
Sent From My Rooted Samsung Galaxy S2
JB 4.1.2 (GT-I9100)
If I helped you, please press the ''Thanks'' button.
Dannyvld said:
Your phone is soft-bricked??
Sent From My Rooted Samsung Galaxy S2
JB 4.1.2 (GT-I9100)
If I helped you, please press the ''Thanks'' button.
Click to expand...
Click to collapse
Yes only can boot into Odin
Which phone you have?
Phone model:
Sent From My Rooted Samsung Galaxy S2
JB 4.1.2 (GT-I9100)
If I helped you, please press the ''Thanks'' button.
Dannyvld said:
Which phone you have?
Phone model:
Sent From My Rooted Samsung Galaxy S2
JB 4.1.2 (GT-I9100)
If I helped you, please press the ''Thanks'' button.
Click to expand...
Click to collapse
Note 2 verizon I605 with beanstown 106 build one in it
What were you doing when the phone ended up like this?
tbns said:
What were you doing when the phone ended up like this?
Click to expand...
Click to collapse
I was rebooting for the first time from recovery
Im gonna look for you if i can find a solution
Sent From My Rooted Samsung Galaxy S2
JB 4.1.2 (GT-I9100)
If I helped you, please press the ''Thanks'' button.
http://forum.xda-developers.com/showthread.php?t=2040264
What have u tried? Have you been able to find stock ROM to flash thru Odin?
Sent from my SCH-I605 using xda app-developers app
Dannyvld said:
Im gonna look for you if i can find a solution
Sent From My Rooted Samsung Galaxy S2
JB 4.1.2 (GT-I9100)
If I helped you, please press the ''Thanks'' button.
Click to expand...
Click to collapse
Thank you
gowansta said:
What have u tried? Have you been able to find stock ROM to flash thru Odin?
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
the few stock roms I have found do not make the check sum in Odin
they seem useless
NB2A said:
the few stock roms I have found do not make the check sum in Odin
they seem useless
Click to expand...
Click to collapse
you have a serious problem on your end...either your computers have viruses or your not telling the whole story. the files work fine i have used them all. i would try installing a fresh copy of windows on your pc.
alternative option: send me your device and 20.00 and i will unlock it and put whatever rom you want on it, then send it back.
droidstyle said:
you have a serious problem on your end...either your computers have viruses or your not telling the whole story. the files work fine i have used them all. i would try installing a fresh copy of windows on your pc.
alternative option: send me your device and 20.00 and i will unlock it and put whatever rom you want on it, then send it back.
Click to expand...
Click to collapse
I need my phone for a sick family member so a trip to Verizon maybe my only option
The files you speak of do not work now for me or they may not need to be unzipped and not specified in directions
The only file Odin sees and does a checksum is is the one that loaded yesterday. The one you said I could not have loaded.
Does Imnuts files for stock recovery need to be unzipped?
NB2A said:
I need my phone for a sick family member so a trip to Verizon maybe my only option
The files you speak of do not work now for me or they may not need to be unzipped and not specified in directions
The only file Odin sees and does a checksum is is the one that loaded yesterday. The one you said I could not have loaded.
Does Imnuts files for stock recovery need to be unzipped?
Click to expand...
Click to collapse
Use SirVilhelm's post for the Odin flashable and make sure you are using the Odin exe from Adam's bootloader unlock thread. Or flash Revision 3 instead of the full stock image. I borked my phone slightly and this worked.
Uncheck auto reboot, and after it finishes unplug and pull battery and wait for 10 seconds so it doesnt keep going back to odin.
Report back if it works at all
EDIT: Imnuts file does not need to be unzipped. Use as is.
Link to revision 3:
http://forum.xda-developers.com/showthread.php?p=35245728
Link to Adam's thread to DL Odin3:
http://forum.xda-developers.com/showthread.php?p=35348366
Sent from my SCH-I605 using xda premium
NB2A said:
I need my phone for a sick family member so a trip to Verizon maybe my only option
The files you speak of do not work now for me or they may not need to be unzipped and not specified in directions
The only file Odin sees and does a checksum is is the one that loaded yesterday. The one you said I could not have loaded.
Does Imnuts files for stock recovery need to be unzipped?
Click to expand...
Click to collapse
your getting corrupt downloads because of something on your end...That's the part your failing to understand... you keep saying "oh well that don't work for me"....ok but there must be a reason. All those files and methods that have been provided work for everyone else including myself. Take a step back make sure your doing everything correctly and make sure your pc is clean and no viruses...again its something on your end.
---------- Post added at 04:57 PM ---------- Previous post was at 04:54 PM ----------
Rebel908 said:
Use SirVilhelm's post for the Odin flashable and make sure you are using the Odin exe from Adam's bootloader unlock thread. Or flash Revision 3 instead of the full stock image. I borked my phone slightly and this worked.
Uncheck auto reboot, and after it finishes unplug and pull battery and wait for 10 seconds so it doesnt keep going back to odin.
Report back if it works at all
EDIT: Imnuts file does not need to be unzipped. Use as is.
Link to revision 3:
http://forum.xda-developers.com/showthread.php?p=35245728
Link to Adam's thread to DL Odin3:
http://forum.xda-developers.com/showthread.php?p=35348366
Sent from my SCH-I605 using xda premium
Click to expand...
Click to collapse
I have been working with the above poster on this issue for a couple days. He has supposedly tried all these files you posted and they don't work for him. there is something going on from his side of the coin...
Very informative response.I thank you a bunch. I ended up using Imnuts stock rom and she booted up fine.I needed to know when those special rooted stock files were there ending in xz format.I could not get Odin to see them.I was not going ti buy this whole brick thing because I was at least able to get into Odin.
I have yet to get Casual to work though even though my machines see my phone in ADB
Happy holidays!
Tom
QUOTE=Rebel908;35850464]Use SirVilhelm's post for the Odin flashable and make sure you are using the Odin exe from Adam's bootloader unlock thread. Or flash Revision 3 instead of the full stock image. I borked my phone slightly and this worked.
Uncheck auto reboot, and after it finishes unplug and pull battery and wait for 10 seconds so it doesnt keep going back to odin.
Report back if it works at all
EDIT: Imnuts file does not need to be unzipped. Use as is.
Link to revision 3:
http://forum.xda-developers.com/showthread.php?p=35245728
Link to Adam's thread to DL Odin3:
http://forum.xda-developers.com/showthread.php?p=35348366
Sent from my SCH-I605 using xda premium[/QUOTE]
NB2A said:
Very informative response.I thank you a bunch. I ended up using Imnuts stock rom and she booted up fine.I needed to know when those special rooted stock files were there ending in xz format.I could not get Odin to see them.I was not going ti buy this whole brick thing because I was at least able to get into Odin.
I have yet to get Casual to work though even though my machines see my phone in ADB
Happy holidays!
Tom
QUOTE=Rebel908;35850464]Use SirVilhelm's post for the Odin flashable and make sure you are using the Odin exe from Adam's bootloader unlock thread. Or flash Revision 3 instead of the full stock image. I borked my phone slightly and this worked.
Uncheck auto reboot, and after it finishes unplug and pull battery and wait for 10 seconds so it doesnt keep going back to odin.
Report back if it works at all
EDIT: Imnuts file does not need to be unzipped. Use as is.
Link to revision 3:
http://forum.xda-developers.com/showthread.php?p=35245728
Link to Adam's thread to DL Odin3:
http://forum.xda-developers.com/showthread.php?p=35348366
Sent from my SCH-I605 using xda premium
Click to expand...
Click to collapse
[/QUOTE]
I provided you with the same links? Now all of a sudden imuts rom worked?? come on tell the truth what else was the problem?? Im not buying it lol...glad you figured it out tho. :good:
I purchased the phone already rooted, but it was on a stock ROM running 4.3 and had TWRP recovery on it. I wanted to unroot and be completely stock, because it was acting funny (wouldn't reboot as it should from the menu, and a couple other things). So I followed this guide:
http://galaxynote3root.com/galaxy-note-3-repair/how-to-unroot-galaxy-note-3/
and it failed. So i tried again from my USB3.0 port and it failed. I'm stuck on the yellow triangle screen which says "Firmware upgrade encountered an issue. Pleas select recover mode in Kies & try again." I downloaded Kies3 and there's nothing in the firmware recovery list, and when I went to upgrade and initialization, I put in the model and s/n, it tells me that the SM-N900P isn't compatible or wont work with that.
I'm at a loss, any help would be great to get me back to a working phone! Thanks!!
themorningsleeve said:
I purchased the phone already rooted, but it was on a stock ROM running 4.3 and had TWRP recovery on it. I wanted to unroot and be completely stock, because it was acting funny (wouldn't reboot as it should from the menu, and a couple other things). So I followed this guide:
http://galaxynote3root.com/galaxy-note-3-repair/how-to-unroot-galaxy-note-3/
and it failed. So i tried again from my USB3.0 port and it failed. I'm stuck on the yellow triangle screen which says "Firmware upgrade encountered an issue. Pleas select recover mode in Kies & try again." I downloaded Kies3 and there's nothing in the firmware recovery list, and when I went to upgrade and initialization, I put in the model and s/n, it tells me that the SM-N900P isn't compatible or wont work with that.
I'm at a loss, any help would be great to get me back to a working phone! Thanks!!
Click to expand...
Click to collapse
Well, I managed to fix it, I downloaded "N900PVPUBMJ4_N900PSPTBMJ4_N900PVPUBMJ4_HOME.tar.md5" from a forum on here, and that managed to work, unlike the one I had tried previously. Back in business.
Just to let you know you can't downgrade the bootloader is the reason it was failing ....
Sent from my SM-N900P using Xparent BlueTapatalk 2
no root??
WHy would you want to be stock, you are missing so much, and what do you mean it was acting funny?
musicman625 said:
WHy would you want to be stock, you are missing so much, and what do you mean it was acting funny?
Click to expand...
Click to collapse
I can't go back! Dont want to.
Help would be appreciated
themorningsleeve said:
Well, I managed to fix it, I downloaded "N900PVPUBMJ4_N900PSPTBMJ4_N900PVPUBMJ4_HOME.tar.md5" from a forum on here, and that managed to work, unlike the one I had tried previously. Back in business.
Click to expand...
Click to collapse
where did you find the download?
alexk421 said:
where did you find the download?
Click to expand...
Click to collapse
When in doubt, turn to this thread,
http://forum.xda-developers.com/showthread.php?p=47983560
[ROM][TAR][ODIN] Full Restore (Return To Stock) N900PVPUBMJ4 TAR
Sent from my SM-N900P using Xparent BlueTapatalk 2
So I tried to root my Note 2 today. I had rooted it once before using Casual this past summer, but due to circumstances i had to get a new one.The replacement came in today, and i tried to root it with the same methods. I believe my mistake was using Casual while i had 4.3 installed on my device. I'm not TERRIBLY android savvy, but i knew enough to know that if i ****ed up i should stop while i'm ahead and ask you guys.
tl;dr
Long story short, while using Casual to root my Note 2 with 4.3 on it, i got this message
ERROR: Failed to confirm end of file transfer sequence!ERROR: recovery upload failed!ERROR: Failed to send end session packet!waiting for device
waited for a good 30 minutes, nothing was changing, turned off phone and now it's bricked, looping at the "Samsung Galaxy Note 2" Splash screen.
I believe i have to use Odin for something but i could really use some help and reassurance before i continue.
Needless to say i will be jamming f5 on my thread until everything is resolved!
Thanks in advance!
mzaric said:
So I tried to root my Note 2 today. I had rooted it once before using Casual this past summer, but due to circumstances i had to get a new one.The replacement came in today, and i tried to root it with the same methods. I believe my mistake was using Casual while i had 4.3 installed on my device. I'm not TERRIBLY android savvy, but i knew enough to know that if i ****ed up i should stop while i'm ahead and ask you guys.
tl;dr
Long story short, while using Casual to root my Note 2 with 4.3 on it, i got this message
ERROR: Failed to confirm end of file transfer sequence!ERROR: recovery upload failed!ERROR: Failed to send end session packet!waiting for device
waited for a good 30 minutes, nothing was changing, turned off phone and now it's bricked, looping at the "Samsung Galaxy Note 2" Splash screen.
I believe i have to use Odin for something but i could really use some help and reassurance before i continue.
Needless to say i will be jamming f5 on my thread until everything is resolved!
Thanks in advance!
Click to expand...
Click to collapse
UPDATE: Since i posted this, i tried to flash a stock firmware on Odin (4.1.2 i believe) and it failed halfway through the procedure. with nothing more to be done, i reset my phone, and where before it was just bootlooping, it now shows me an entirely different screen reading "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
Since then i have tried a different firmware file, still 4.1.2, Odin get's to the very end of the procedure, and crashes at what i assume is the reboot portion. Desperately need assistance!
You can't flash anything other than 4.3 if you have the 4.3 bootloader.
akellar said:
You can't flash anything other than 4.3 if you have the 4.3 bootloader.
Click to expand...
Click to collapse
OH. That makes a lot of sense....
I will try to flash a 4.3 firmware right now. Will i need some sort of .pit file or something to fix the initial bootloop? Or is that problem just totally blown out of the water at this point?
mzaric said:
OH. That makes a lot of sense....
I will try to flash a 4.3 firmware right now. Will i need some sort of .pit file or something to fix the initial bootloop? Or is that problem just totally blown out of the water at this point?
Click to expand...
Click to collapse
I cant seem to find the file anywhere. Only on terafile via SamMobile, but the download link doesn't seem to work.
What are my options as far as this bootloader go?
Did you look in the general section at the unbricker thread?
Sent from my MB886 using xda app-developers app
palmbeach05 said:
Did you look in the general section at the unbricker thread?
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
I did a bunch of searches on the site as i was f****ing my phone up, systematically. Im really sorry if this thread doesn't go here, i just didn't know who else to ask
YES!
Found the proper 4.3 file, flashed it via Odin. Everything is stock and ready. If anybody wishes to help me root it from here or point me in the right direction that'd be great but other than that, thanks for letting me post here and thanks to those who helped me out!
mzaric said:
YES!
Found the proper 4.3 file, flashed it via Odin. Everything is stock and ready. If anybody wishes to help me root it from here or point me in the right direction that'd be great but other than that, thanks for letting me post here and thanks to those who helped me out!
Click to expand...
Click to collapse
Currently the only way to root your OTA 4.3 Note 2 is to use saferoot, read this thread carefully
http://forum.xda-developers.com/showpost.php?p=48392009&postcount=1
Sent from my SCH-I605 using Tapatalk
I found myself in the same situation. Where might I find the PIT file? I can't reboot the phone to get the PIT file because it's soft bricked like mzaric's phone was. I'm using Mac OS X so I'm having to use JOdin3 to flash the stock 4.3 firmware back, but without the PIT file I can't continue and I've searched endlessly to find the PIT file. Also a somewhat related question, I heard JOdin isn't good for flashing big files, but I have no alternative, is the stock firmware which is 1.1gb too big to flash?
EDIT: I sadly didn't search hard enough thank you droidstyle for the guide. But my next question is I'm unsure of what version the phone is because when I originally tried to do the CASUAL unlock I believe it was on 4.1.2, but I think it softbricked to begin with because it was 4.3. Should I just try doing the 4.1.2 and if it doesn't take, retry with the 4.3?
If you flashed n7100 firmware you are screwed. If not just Odin back to stock. You were on 4.1.2 if you were unlocked using casual. Don't go to 4.3
Sent from my SCH-I605 using Tapatalk
So, this all started last year when i wanted to disable updates. For the life of me, i cant remember what i did but there have been no updates. Recently, I have been getting the OTA notification to update. So i did that and when it installs it gives an error at 26%. My phone is rooted and has USB debugging on so i put it in download mode and tried to use ODIN to update it with both the stock firmware and KitKat. they both failed. Today, I tried to do it again but added the file to BL instead of AP in ODIN. Now my phone gives the "Firmware upgrade encountered an issue" screen. I tried to use Kies to fix it but it doesnt connect when this screen is up. When i restart the phone in download mode, then my computer detects the device.
I have a ATT gs4 model SGH-I337
Please HELP!
tbsrules2 said:
So, this all started last year when i wanted to disable updates. For the life of me, i cant remember what i did but there have been no updates. Recently, I have been getting the OTA notification to update. So i did that and when it installs it gives an error at 26%. My phone is rooted and has USB debugging on so i put it in download mode and tried to use ODIN to update it with both the stock firmware and KitKat. they both failed. Today, I tried to do it again but added the file to BL instead of AP in ODIN. Now my phone gives the "Firmware upgrade encountered an issue" screen. I tried to use Kies to fix it but it doesnt connect when this screen is up. When i restart the phone in download mode, then my computer detects the device.
I have a ATT gs4 model SGH-I337
Please HELP!
Click to expand...
Click to collapse
flash a stock rom and then fastboot flash your stock recovery, then update your phone the update should be triggered in the stock recovery,with a custom recovery, it won't work
the only other easy way around this besides doing what I said is to look for a firmware thread for your device and flash the firmware as a op who has tested it states.
toolhas4degrees said:
flash a stock rom and then fastboot flash your stock recovery, then update your phone the update should be triggered in the stock recovery,with a custom recovery, it won't work
Click to expand...
Click to collapse
Thank you so much for your help! When i try to do this, i get an error. I received this error before as well when trying do this with both the update and the one that came stock. Please see attached image.
tbsrules2 said:
Thank you so much for your help! When i try to do this, i get an error. I received this error before as well when trying do this with both the update and the one that came stock. Please see attached image.
Click to expand...
Click to collapse
try this http://www.androidrootz.com/p/galaxy-s4-stock-firmwares.html
then use your previous unlock/root method after upgrading
toolhas4degrees said:
try this http://www.androidrootz.com/p/galaxy-s4-stock-firmwares.html
then use your previous unlock/root method after upgrading
Click to expand...
Click to collapse
So i did that but still got an error. I think that one of the reasons why it was messing up before is an issue with Kies blocking the port from opening. So i closed that out per the below thread.
http://forum.xda-developers.com/showthread.php?t=1622790
But it started and the status bar on my phone is now blue (which is what how this bigger issue started before) I found this other link that kind of fits whats going on. Should i just follow the PIT instructions from here and of course just restart my phone again?
http://www.droidviews.com/how-to-unbrick-your-bricked-samsung-galaxy-s4-gt-i9500-gt-i9505/
tbsrules2 said:
So i did that but still got an error. I think that one of the reasons why it was messing up before is an issue with Kies blocking the port from opening. So i closed that out per the below thread.
http://forum.xda-developers.com/showthread.php?t=1622790
But it started and the status bar on my phone is now blue (which is what how this bigger issue started before) I found this other link that kind of fits whats going on. Should i just follow the PIT instructions from here and of course just restart my phone again?
http://www.droidviews.com/how-to-unbrick-your-bricked-samsung-galaxy-s4-gt-i9500-gt-i9505/
Click to expand...
Click to collapse
I think you may want to pm the developer of kies to solve your issue, since I don't have your device, that's about as much help as I can be.
toolhas4degrees said:
I think you may want to pm the developer of kies to solve your issue, since I don't have your device, that's about as much help as I can be.
Click to expand...
Click to collapse
UPDATE: so my phone is actually booting now since i re-partitioned it. As i am trying to update to the latest firmware i am still getting an error.
What update were you on before you started? And there's a newer update or 2 past NB1 now.
Sent from my One using XDA Premium 4 mobile app
es0tericcha0s said:
What update were you on before you started? And there's a newer update or 2 past NB1 now.
Sent from my One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Im pretty sure i was at 4.3. So everything was working and then i found a random article saying that with the ALL_ATT_I337UCUFNB1_I337ATTFNB1_505595_REV06_user_low_ship_MULTI_CERT.tar.md5 update, you have to put in the PIT file again. So i did that and now my phone turns on and says custom, but then shuts off. I can go into download mode and recovery. I tried to factory reset everything but to no avail.
tbsrules2 said:
Im pretty sure i was at 4.3. So everything was working and then i found a random article saying that with the ALL_ATT_I337UCUFNB1_I337ATTFNB1_505595_REV06_user_low_ship_MULTI_CERT.tar.md5 update, you have to put in the PIT file again. So i did that and now my phone turns on and says custom, but then shuts off. I can go into download mode and recovery. I tried to factory reset everything but to no avail.
Click to expand...
Click to collapse
Hmm, the pit might be why you're having issues. Most updates don't need the separate pit file. If it's needed, it's often packaged in the main tar file. I would just redo the Odin flash without pit and factory reset afterwards.
es0tericcha0s said:
Hmm, the pit might be why you're having issues. Most updates don't need the separate pit file. If it's needed, it's often packaged in the main tar file. I would just redo the Odin flash without pit and factory reset afterwards.
Click to expand...
Click to collapse
When i try to do this, it says "Fail" is there a way that I can contact you directly?
Ill give whoever helps me with this $10 tonight via paypal
tbsrules2 said:
When i try to do this, it says "Fail" is there a way that I can contact you directly?
Ill give whoever helps me with this $10 tonight via paypal
Click to expand...
Click to collapse
What step does it fail at?
My contact info is in my signature.
es0tericcha0s said:
What step does it fail at?
My contact info is in my signature.
Click to expand...
Click to collapse
I private messaged you