Related
somebody have the xperia arc stock camera app working on a xperia x10???
Alucard93 said:
somebody have the xperia arc stock camera app working on a xperia x10???
Click to expand...
Click to collapse
The XPERIA Arc camera app was created for a different set of camera hardware. The Arc has Sony's touted 'Exmor R' CMOS sensor and a different lense where both perform better in low-light conditions than whatever SE smart phone before it.
I would think the app itself and whatever drivers it might require would need to be changed in some way to make it work with the X10. And even if someone were to get something like this working, the differences in hardware would make the end result taken pictures look pretty much like whatever came out of the X10's stock camera app anyway.
xdadevelopers1222 said:
The XPERIA Arc camera app was created for a different set of camera hardware. The Arc has Sony's touted 'Exmor R' CMOS sensor and a different lense where both perform better in low-light conditions than whatever SE smart phone before it.
I would think the app itself and whatever drivers it might require would need to be changed in some way to make it work with the X10. And even if someone were to get something like this working, the differences in hardware would make the end result taken pictures look pretty much like whatever came out of the X10's stock camera app anyway.
Click to expand...
Click to collapse
and the UI I mean the way that the app displays the photos taked before, and the form that display the different options of the camera???
Alucard93 said:
and the UI I mean the way that the app displays the photos taked before, and the form that display the different options of the camera???
Click to expand...
Click to collapse
Unless there was a dramatic difference in picture quality and general functionality, I don't think the fancier user interface of the Arc's stock camera would be enough to get the XDA devs to even try porting it over for the X10.
I want the stock xperia arc camera interface ported to my xperia x10 too! Just the interface.
Is there anyway to port 3d camera to X10 because it could installed on arc in straight shot even in 2.3.3.
but in the x10 "camera availible
sry for eng.
edit
if wrong section apologise but some serious mondyfication will be needed especially in drivers
marcoplo said:
Is there anyway to port 3d camera to X10 because it could installed on arc in straight shot even in 2.3.3.
but in the x10 "camera availible
sry for eng.
edit
if wrong section apologise but some serious mondyfication will be needed especially in drivers
Click to expand...
Click to collapse
not realy in driver , you all need to know , SE or any manufacter creat app , and the resources of the app , is not on the app , but on the framework , exemple if it need the background of the camera , it use a image but the image is not onthe app but on framework-res.apk or semcgenericuxpres.apk , so you will need to add them to it and then make it public so add the line on public.xml
my sugestion , open your app with apktool , then lock on all xml files , and search for @android: , and @com.sonyericsson.uxp: , so you can if apktool decompil it succesfully and recompile it without any change without any issue so , edit the @android:drawable/slider for exemple to @drawable:slider, and add the image from you decompiled framework-res.apk , and recomoile it so it will have all the resources , then if not work again use logcat and tray to understand why it not work , if you can not do it so just give up no need to past time ,
cheers
Achotjan
Achotjan said:
not realy in driver , you all need to know , SE or any manufacter creat app , and the resources of the app , is not on the app , but on the framework , exemple if it need the background of the , it use a image but the image is not onthe app but on framework-res.apk or semcgenericuxpres.apk , so you will need to add them to it and then make it public so add the line on public.xml
my sugestion , open your app with apktool , then lock on all xml files , and search for @android: , and @com.sonyericsson.uxp: , so you can if apktool decompil it succesfully and recompile it without any change without any issue so , edit the @android:drawable/slider for exemple to @drawable:slider, and add the image from you decompiled framework-res.apk , and recomoile it so it will have all the resources , then if not work again use logcat and tray to understand why it not work , if you can not do it so just give up no need to past time ,
cheers
Achotjan
Click to expand...
Click to collapse
you need two cameras lences. x10 has only one
robertberma said:
you need two cameras lences. x10 has only one
Click to expand...
Click to collapse
oh thanks for the info , but i not wrot that for camera only is in general
cheers
Achotjan
dont worry, I know we will all get 66.66% 3D camera on our x10s ...
robertberma said:
you need two cameras lences. x10 has only one
Click to expand...
Click to collapse
how do you need TWO camera lenses? there is not one sony ericsson xperia phone with two cameras on one side...yes there is some with one front camera and one back but SE has yet to make a phone with two cameras on one side, it indeed can be ported.
CAYCE_VII said:
how do you need TWO camera lenses? there is not one sony ericsson xperia phone with two cameras on one side...yes there is some with one front camera and one back but SE has yet to make a phone with two cameras on one side, it indeed can be ported.
Click to expand...
Click to collapse
Two built in camera lenses are needed to make the 3D effect.
xArtanis said:
Two built in camera lenses are needed to make the 3D effect.
Click to expand...
Click to collapse
This app is on the arc, Neo, and mini. None of which have 2 cameras
Sent from my X10i using xda premium
i AM ALREADY WORKING ON IT NOW. AND WHAT THE HELL IS ROBERTBERMA ON ABOUT? YOU NEED TWO CAMERA'S? THE ARC OR THE NEO DOES NOT HAVE TWO CAMERA'S UNLESS THEY FLASHED A MAGICAL ZIP THAT ADDED THAT CAMERA THE CAMERA IS PORTABLE AND ME AND MY MATES ARE WORKING ON IT NOW. LIBS NEED TO BE MODIFIED AND SO DO THE FRAMEWORK FILES. I AM NOT PROMISING IT WILL BE PORTED BY ME AS IT PROBABLY NEED SOMEONE WITH MORE SKILL BUT THERE IS 3 OF US WORKING ON THIS BUT IM THE ONLY ONE OF US THREE THAT HAS A X10
ALSO IN THE WRONG THREAD BUDDY
Hi Black,
do us all a favour and proof your Keyboard-Settings or take a view before sending it.
It isn't the right "style" to write something only in CAPS ...
Best regards
tekknix
Blackwatch89 said:
i AM ALREADY WORKING ON IT NOW. AND WHAT THE HELL IS ROBERTBERMA ON ABOUT? YOU NEED TWO CAMERA'S? THE ARC OR THE NEO DOES NOT HAVE TWO CAMERA'S UNLESS THEY FLASHED A MAGICAL ZIP THAT ADDED THAT CAMERA THE CAMERA IS PORTABLE AND ME AND MY MATES ARE WORKING ON IT NOW. LIBS NEED TO BE MODIFIED AND SO DO THE FRAMEWORK FILES. I AM NOT PROMISING IT WILL BE PORTED BY ME AS IT PROBABLY NEED SOMEONE WITH MORE SKILL BUT THERE IS 3 OF US WORKING ON THIS BUT IM THE ONLY ONE OF US THREE THAT HAS A X10
ALSO IN THE WRONG THREAD BUDDY
Click to expand...
Click to collapse
Even the normal Sony Cybershot cmaeras manage to make 3D Photos with a normal Objectif.
But does someone here have a 3D Screen and can see the pictures in 3D ? I dont think they look that good.
Blackwatch89 said:
i AM ALREADY WORKING ON IT NOW. AND WHAT THE HELL IS ROBERTBERMA ON ABOUT? YOU NEED TWO CAMERA'S? THE ARC OR THE NEO DOES NOT HAVE TWO CAMERA'S UNLESS THEY FLASHED A MAGICAL ZIP THAT ADDED THAT CAMERA THE CAMERA IS PORTABLE AND ME AND MY MATES ARE WORKING ON IT NOW. LIBS NEED TO BE MODIFIED AND SO DO THE FRAMEWORK FILES. I AM NOT PROMISING IT WILL BE PORTED BY ME AS IT PROBABLY NEED SOMEONE WITH MORE SKILL BUT THERE IS 3 OF US WORKING ON THIS BUT IM THE ONLY ONE OF US THREE THAT HAS A X10
ALSO IN THE WRONG THREAD BUDDY
Click to expand...
Click to collapse
I kept trying to tell him that. I'm also making a zip for the keyboard and also trying to get the 3d camera working.
Sent from my X10i using xda premium
For all those who believe that for capturing 3D image you need two cameras... well look at this:
http://stereo.gsfc.nasa.gov/classroom/3d.shtml
What you basically need is to take 2 pictures with small difference in angles of a shoot, and software for processing/merging them together.
I understand that the SE phones do not have two lenses, but from what I've seen, SE is the only company to release a '3d camera' that does not have two lenses.
Like I said, obviously, SE does not do this, but I understand the confusion....close one eye....do you still have depth perception? no, you lose it, because you need two focal points to see distance & depth. This is true with cameras as well....just look at the evo 3d. it takes amazing 3d pics, and that's thanks to its second lens.
That being said, obviously SE has discovered a way to make it work with only one lens....but IMHO, I wouldn't even bother. It's gonna be a horrible attempt at 3d, from what I can tell with the hardware that is available. I can't say I've seen the 3d pics taken with the app, nor do I own any of the phones that have the app already working...but making an educated guess, this will most likely be a horrible image that barely looks 3d...it just suggests the image COULD have some more depth to it than usual. But as I said, I'm just speculating, so please don't go flaming me just for stating my opinion
hey people little online research will tell you how sony gets 3d photos from a single lens camera , while it is true that 2 lenses are used because , you need 2 different perspectives for 3d
what sony does is ask you to take a photo , move your hand to the side a little (causing the change in perspective) and take one more , they then combine the 2 perspectives to make a 3d image , like if it had 2 lenses
my research shows that the 3d combination program is based on their panaroma image combination technique
pardon my laziness but how is the 3d camera app different from panorama?
Hmm, 3D is not Panorama. With Panorama you will be able to take a photo seamless from left to right (or vice versa) or Up to down (or vice versa) and the App will then put the images captured into one big photo and due to this you will get a Panorama - View.
3D is a complete different thing.
Best regards
tekknix
Hi.
Just though I would create this thread to help other dev's with getting the camera to work on JB.
This example is for compiling from source.
I will give a guide with commits I have just made on an example repo for the purpose of this thread.
I have made all the changes to zeus they are exact same for zeusc
You will need to -
- Get libstagefright_soft_aacdec.so from the attachment below (extract the zip) or any working ICS ROM for our device
Place libstagefright_soft_aacdec.so into vendor/semc/zeus/proprietary/lib
https://github.com/garwedgess/propr...mmit/004057e96521b231e2b42800e5ea142a3ff8dde5
- Then add the path to zeus-vendor-blobs.mk in vendor/semc/zeus NOTE - Do not add it to last line add it like this
Copy the whole line I made a mistake with initial commit :silly:
https://github.com/garwedgess/propr...mmit/1947b88aa45b2b879ac49241118a9cebcfa520b5
- Lastly Go into device/semc/msm7x30-common ----> open BoardConfigCommon.mk and make the changes like in this commit I have made
https://github.com/garwedgess/andro...mmit/d58dd288c1d277e661a4cb533fa8b9c6515c349f
You do not need last line TARGET_BOOTANIMATION_RGB565 := true
That is it, this will let you have a working legacy camera only thing that doesn't work is panorama. JB camera will not FC, can still take pictures and record but unusable due to the green tint on screen
Hope this guide helps you all to bring more JB ROM's to the PLAY and will hopefully help the development of JB on our device.
Nice share! Have you tried porting official latest ICS camera sources or is that what you've already done? Anyway, perhaps the green tint is due to the RGBA offset change made to jellybean. See http://review.cyanogenmod.org/#/c/20403/
mmmm... Do this change doesn't may affect the legacy camera too?
That's great. thanks for share.
farenheith said:
mmmm... Do this change doesn't may affect the legacy camera too?
Click to expand...
Click to collapse
wedgess said:
That is it, this will let you have a working legacy camera only thing that doesn't work is panorama. JB camera will not FC, can still take pictures and record but unusable due to the green tint on screen
Click to expand...
Click to collapse
QFT
CosmicDan said:
QFT
Click to expand...
Click to collapse
Sorry xD. I meant about your shot.
CosmicDan said:
Nice share! Have you tried porting official latest ICS camera sources or is that what you've already done? Anyway, perhaps the green tint is due to the RGBA offset change made to jellybean. See http://review.cyanogenmod.org/#/c/20403/
Click to expand...
Click to collapse
This change on the RGBA offset doesn't may affect the legacy camera too? I mean, if this is causing the green tint, then the legacy camera would have this problem too, isn't it?
farenheith said:
Sorry xD. I meant about your shot.
This change on the RGBA offset doesn't may affect the legacy camera too? I mean, if this is causing the green tint, then the legacy camera would have this problem too, isn't it?
Click to expand...
Click to collapse
Oh! So only JB Camera has a green tint but ICS AOSP Camera is fine? Sorry I misunderstood I have no idea then.
CosmicDan said:
Oh! So only JB Camera has a green tint but ICS AOSP Camera is fine? Sorry I misunderstood I have no idea then.
Click to expand...
Click to collapse
Ye JB camera has the green tint on preview, however it can take pictures fine, record fine and no FC's. On legacy camera only thing not working ATM is panorama, this will give a FC
Sent from my GT-I9300 On Official JB
wedgess said:
Ye JB camera has the green tint on preview, however it can take pictures fine, record fine and no FC's. On legacy camera only thing not working ATM is panorama, this will give a FC
Sent from my GT-I9300 On Official JB
Click to expand...
Click to collapse
Only on Preview? Maybe I will take a look at the smali and hack it to use same preview functions that AOSP camera does then. But not any time soon, so anyone else feel free to do it
I had the same idea.
If you want, you can see the original source code of both, jellybean and cm9.1 brand, here:
https://github.com/CyanogenMod/android_packages_apps_Camera
I think it's easier to see patterns on java/c++/c code than smali. I analyzed until now the jni folder (cpp and c files). I didn't found much relevant difference :/...
jni/feature_mos/src/mosaic/Mosaic.cpp
The code looks very the same, but on Jellybean this file have some treatment on a field called owned_frames. This field is declared at Mosaic.h and the ICS code looks pretty compatible with the JB one. Maybe is possible to compile the JB camera replacing this file for the one from ICS code... About what is owned_frames I didn't investigated yet xD.
jni/mosaic_renderer_jni.cpp
This code looks to be optimized on JB. On ICS we have a lot of buffer treatment (clean and fill) that in JB code is replaced by comments like "there's no need to clean the buffer". The initizliation of some semaphores has been moved either... on JB we have those jni functions: JNICALL JNI_OnLoad and JNICALL JNI_OnUnload. Looks like some semaphores is been initialized and destroyed there, instead of AllocateTextureMemory (for the sem_init) and FreeTextureMemory (for the sem_destroy)
Until now this is the only potential relevant info . Maybe I'm looking at the wrong place
wait... which one of the camera apps is with zoom option?
ravid1323 said:
wait... which one of the camera apps is with zoom option?
Click to expand...
Click to collapse
You shouldn't use Digital Zoom. Take photo in highest res possible then resize/crop photo on PC/photo software, better quality.
i searched for jb camera libs and saw this http://www.groubal.com/jb-camera-libs-for-all-sony-xperia-2011-phones/#signatures i don't saw a lot, but for case it will help, so there you go
ravid1323 said:
i searched for jb camera libs and saw this http://www.groubal.com/jb-camera-libs-for-all-sony-xperia-2011-phones/#signatures i don't saw a lot, but for case it will help, so there you go
Click to expand...
Click to collapse
No, it wont help. We need newer kernel.
http://forum.xda-developers.com/showthread.php?t=1890158 what about this?
ravid1323 said:
http://forum.xda-developers.com/showthread.php?t=1890158 what about this?
Click to expand...
Click to collapse
No, that's just basic change. We will soon have JB camera working thanks to CMX10 and wedgess (but probably no Photosphere because it requires gyroscope hardware AFAIK)
CosmicDan said:
No, that's just basic change. We will soon have JB camera working thanks to CMX10 and wedgess (but probably no Photosphere because it requires gyroscope hardware AFAIK)
Click to expand...
Click to collapse
that's makes me happy but i thought that it will possible only with newer kernel. anyway, it doesn't so bad the missing photosphere. it's like on galaxy s. and about littel missing smooth, it is can done like here: http://forum.xda-developers.com/showthread.php?t=2013425 and about the other things that don't works, i belive that with help from markphyton, the other things will be fixed like what wedgess did with ics camera libs
and all this makes me happy!
ravid1323 said:
that's makes me happy but i thought that it will possible only with newer kernel. anyway, it doesn't so bad the missing photosphere. it's like on galaxy s. and about littel missing smooth, it is can done like here: http://forum.xda-developers.com/showthread.php?t=2013425 and about the other things that don't works, i belive that with help from markphyton, the other things will be fixed like what wedgess did with ics camera libs
and all this makes me happy!
Click to expand...
Click to collapse
I have no idea what you're talking about. This is for Jellybean, not ICS. Wedgess, I and FXP are the main developers of JB for our device.
Hi, i'm sorry, but i can't ask questions in dev area, so i need t start here.
I can't get managed power amp to work on this rom.
I didn't install walkman and no xloud, but even then it doesn't work.
Has anyone a hint for me what i need to do?
Thanks.
I had this problem too ... tried reinstalling many times with different settings in aroma .... but powerAMP didn t work.
I think its a bug and it won t work until it is fixed
Mr.Bombastic said:
I had this problem too ... tried reinstalling many times with different settings in aroma .... but powerAMP didn t work.
I think its a bug and it won t work until it is fixed
Click to expand...
Click to collapse
NO i got it fixed.
It went into the different addons and found, that with project "fluid" there are some files placed in the lib-folder which have to do with audio.
So i tried to install without the fluid package and now it works.
Then i removed the files that have to do something with audio from the fluid add on folder, and now i have, walkman, poweramp, and fluid patches working.!
Frodo07 said:
NO i got it fixed.
It went into the different addons and found, that with project "fluid" there are some files placed in the lib-folder which have to do with audio.
So i tried to install without the fluid package and now it works.
Then i removed the files that have to do something with audio from the fluid add on folder, and now i have, walkman, poweramp, and fluid patches working.!
Click to expand...
Click to collapse
Sooo SOOO Coooooll !!!! Thk BRO i have search how to solved this bug since a long time ago and no fix !!! I will add you in my Credits :victory::victory::victory::victory:
I had made an error in files copy...
HeadFox said:
Sooo SOOO Coooooll !!!! Thk BRO i have search how to solved this bug since a long time ago and no fix !!! I will add you in my Credits :victory::victory::victory::victory:
I had made an error in files copy...
Click to expand...
Click to collapse
Now, the last thing missing on your rom, is just a camera which has pictures with same quality than the original... Then it would be perfect
I don't want features and tools, i just need quality - i know what my camera was abled to do.
At the moment i'm using the stock android camera.
Other problem with this is, it shows always a 16:9 picture, even if i select 8mpx. The outcome is 4:3, but in the preview the picture is cut, and not as sharp, as the real output is then. So you never know if it is well focused or not, because in preview it s always not realy sharp.
Frodo07 said:
Now, the last thing missing on your rom, is just a camera which has pictures with same quality than the original... Then it would be perfect
I don't want features and tools, i just need quality - i know what my camera was abled to do.
At the moment i'm using the stock android camera.
Other problem with this is, it shows always a 16:9 picture, even if i select 8mpx. The outcome is 4:3, but in the preview the picture is cut, and not as sharp, as the real output is then. So you never know if it is well focused or not, because in preview it s always not realy sharp.
Click to expand...
Click to collapse
Yes i just check it. It will be fix in Next Release wh comes thiw week-end The photos quality of CM for Xperi is really really bad.... ! Only Focal Camera have a good quality but didn't work on our cm10 device for now
HeadFox said:
Yes i just check it. It will be fix in Next Release wh comes thiw week-end The photos quality of CM for Xperi is really really bad.... ! Only Focal Camera have a good quality but didn't work on our cm10 device for now
Click to expand...
Click to collapse
Yes exactly, focal is just a FC on xperia neo. The real output pictures on xperia neo aren't sooo bad with stock camera... i just compared some pic's. Not so bad... minimal difference
Biggest Problem on stock camera: Preview 16:9, not sharp preview, and lot slower then cybershot camera.
Do you think that the 16:9 problem is just any xml or other config problem? If so, please tell me just what i need to change (or replace gallery.apk?), so that i don't need to reflash the whole rom (i've done some changes... )
Other small bug i found is (but i think its cm10 problem): GPS Problems - with Navigon it gets connection for 5 seconds, then looses, reconnect, lost and so on. Only if i start gps status tool before opening navigon, it's working. And the google maps arrow is spinnig around all the time - no idea what this problem causes.
Which camera mod is better in your opinion?
Cyberian III is a lot better. Motivations? More quality in photo than pexocam,it real mod photo framework and libs in Sony camera and android marshmallow frameworks(pexocam is only a modded stock cam apk), the superior auto is really better and it isn't go crazy like pexocam. And the 3rd camera apps ,have more quality in shoots too. For now is the best modded camera for xperia for me.
Up.. Also asking...
Cyberian isn't really a true mod, I've read that it just contains modified smali files.. I've seen screenshots and use Pexocam myself, so I'm going for Pexocam.
Cyberian III cuz it has manual iso and shutter speed on 2.0 UI camera, 1080p 60fps option and also add intelligent active in SteadyShot
iArvee said:
Cyberian isn't really a true mod, I've read that it just contains modified smali files.. I've seen screenshots and use Pexocam myself, so I'm going for Pexocam.
Click to expand...
Click to collapse
Cyberian III it isn't a true mod? Try by yourself before writing... It makes better photos than pexocam. And also it have real libs and modded files to make better photos. Pexocam only a modded apk. . The old cyberian x1 for lollipop it isn't a real mod. You probably confused it with new cyberian III (it is the same thread)
Damn wanted to try Cyberian mod but it's only for MM... I would if MM wasn't so lame...
Sent from my D6503 using XDA-Developers mobile app
We have z5serie and x serie didn't test anyone till now.
No one is compatible with
Thank you