if i want to select "choose zip from sdcard" i get status 0, E:Can't mount /scard/
also sideload isn't working
* failed to write data 'protocol fault (no status)' *
what can i do?
I want to install CM10.1 on my Archos G9 Turbo Flash.
So, i will throw the Archos away...
oidenburga said:
if i want to select "choose zip from sdcard" i get status 0, E:Can't mount /scard/
also sideload isn't working
* failed to write data 'protocol fault (no status)' *
what can i do?
I want to install CM10.1 on my Archos G9 Turbo Flash.
Click to expand...
Click to collapse
Alright then. Does the sdcard work on the stock rom/other devices?
About your comment of throwing you device away:
Why throw device away if CM does not install on it?
julle131 said:
Alright then. Does the sdcard work on the stock rom/other devices?
About your comment of throwing you device away:
Why throw device away if CM does not install on it?
Click to expand...
Click to collapse
thanks for the answer
with sdcard, i mean the internal sdcard
so it is impossible to install any rom
oidenburga said:
thanks for the answer
with sdcard, i mean the internal sdcard
so it is impossible to install any rom
Click to expand...
Click to collapse
So you can't install stock from SDE?
Have you tried the "reformat device" option inside SDE? If you are going to try it, remember to have stock rom ready. The tablet will ask it after formatting.
hm, i havent tried to install stock, because i thought that this will be the same as installing CM
i will have a look at this
http://forum.xda-developers.com/showthread.php?t=2165648
I dont know where to put the "archos.ext4.update"
I am not able to get fiels on /mnt/storage/
____________________________________________
I put the "archos.ext4.update" on the internal storage, and make all like the instruction, but the i stuck in a bootloop
oidenburga said:
http://forum.xda-developers.com/showthread.php?t=2165648
I dont know where to put the "archos.ext4.update"
I am not able to get fiels on /mnt/storage/
____________________________________________
I put the "archos.ext4.update" on the internal storage, and make all like the instruction, but the i stuck in a bootloop
Click to expand...
Click to collapse
So was the install of stock successful? I think you should get the stock working before trying other custom ROMs.
And after getting the stock back, then to check other roms.
Bootloop? ROM starts loading and then boots again? Hmm... As its stock-based ROM, it shouldn't do that when you are coming from stock.
Get the stock working, and then format your /data from SDE.
Sent from my GT-I9100 using xda app-developers app
No it wasnt.
It stucks at the Archos Logo.
And now i am not able to get in the recovery anymore
oidenburga said:
No it wasnt.
It stucks at the Archos Logo.
And now i am not able to get in the recovery anymore
Click to expand...
Click to collapse
SDE is the only official recovery. The CWM functioned like a small custom ROM. Did you also try the reformat device option?
Sent from my GT-I9100 using xda app-developers app
julle131 said:
SDE is the only official recovery. The CWM functioned like a small custom ROM. Did you also try the reformat device option?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
I will test "reformat".
and then i am going to install stock rom.
i hope so
Related
Hi there. I've installed framework.res.apk from this thread, but suddenly got a bootloop. I can boot into cwm, but how i can install stock framework.res.apk? mb form odin? and also, where i can get it?
I know, i must do backup but im an idiot i know.
If someone can help me, i'll be appreciate it, thanks.
lobzison said:
Hi there. I've installed framework.res.apk from this thread, but suddenly got a bootloop. I can boot into cwm, but how i can install stock framework.res.apk? mb form odin? and also, where i can get it?
I know, i must do backup but im an idiot i know.
If someone can help me, i'll be appreciate it, thanks.
Click to expand...
Click to collapse
Try a factory reset .
You can not install framework via Odin .
jje
JJEgan said:
Try a factory reset .
You can not install framework via Odin .
jje
Click to expand...
Click to collapse
Already done, nothing changes.
Thats bad, but if i install a full ROM from odin, will it replase framework.res.apk?
lobzison said:
Already done, nothing changes.
Thats bad, but if i install a full ROM from odit, will it replase framework.res.apk?
Click to expand...
Click to collapse
Yes, new rom replace all things
well since you have already done factory reset (and lost all your data) no point in whats written below
But if it happens next time and you want to preserve data, please mention if you are running an odexed/deodexed rom. Someone nice here can upload the file(s) you need and you can push them to your phone using adb
watsa said:
odexed/deodexed rom
Click to expand...
Click to collapse
I think stock rom was odexed How i can check is my rom odexed/deodexed?
Also, thanks you guys for so fast help, now i must just w8 when i can download a new ROM, i cant afford to download it now.
lobzison said:
I think stock rom was odexed How i can check is my rom odexed/deodexed?
Also, thanks you guys for so fast help, now i must just w8 when i can download a new ROM, i cant afford to download it now.
Click to expand...
Click to collapse
Yes stock rom will always be odexed. to check you can go to app or framework folder in system/ and see if you have corresponding odex files for apk or jars.
Edit: Also a suggestion. Don't flash mods that do not specefically say that they are for odexed roms (if you are on stock). For brightness control you can use lux brightness free from market. it gives you control on how much brightness you need
One guy from local forum gave me a restore zip file. Any ideas how can i push it on phone, if it loads only in cwm and download mode?
lobzison said:
One guy from local forum gave me a restore zip file. Any ideas how can i push it on phone, if it loads only in cwm and download mode?
Click to expand...
Click to collapse
You should be able to mount your sd card from CWM. there is a option to do just that
watsa said:
You should be able to mount your sd card from CWM. there is a option to do just that
Click to expand...
Click to collapse
Pretty obvious and easy Kind of ridiculous, but TODAY i forgot my tab with sd card so, i'll fix that later
Thanks for answering my silly questions, ill upload a fix file here later, maybe someone have same problem.
No no you should be able to mount your phone' internal memory too. I am on AOSP 4.1.1 else i would have helped more
watsa said:
No no you should be able to mount your phone' internal memory too. I am on AOSP 4.1.1 else i would have helped more
Click to expand...
Click to collapse
Hm, when i choose "mount /sdcard" nothing happens, screen just refreshes, no errors, but i cant "unmount /sdcard"
Thats strange.
add: But i can "apply zip from /sdcard" and can see all directories in /sdcard
I know I just have missed the thread and/or I am not searching for the correct words, but could someone help me find how to restore a rooted nook Tablet running CM9 alpha.05 to the out of box user experience?
My recovery is twrp 2.2 and I'm not very familiar with it or even cwm for that manner in how to restore and unroot.
Any and all help is very much appreciated and sorry for posting this if there is another thread somewhere.
downsay said:
I know I just have missed the thread and/or I am not searching for the correct words, but could someone help me find how to restore a rooted nook Tablet running CM9 alpha.05 to the out of box user experience?
My recovery is twrp 2.2 and I'm not very familiar with it or even cwm for that manner in how to restore and unroot.
Any and all help is very much appreciated and sorry for posting this if there is another thread somewhere.
Click to expand...
Click to collapse
Well since you have a custom recovery the only way you can get to stock is to use adamoitlers total wipe flash back to stock and root from there. You could try flashing some stock recovery but it is a bit risky IMO.
Sent from my Nook Tablet CM7 BETA using xda premium app
8GB or 16GB model?
Cubanluke88 said:
8GB or 16GB model?
Click to expand...
Click to collapse
16gb
Here ya go
You'll need to do one thing before you do any of that and thats get clockworkmod recovery on there first. You should be able to use indirect's app to flash recovery to do that.
Cubanluke88 said:
Here ya go
You'll need to do one thing before you do any of that and thats get clockworkmod recovery on there first. You should be able to use indirect's app to flash recovery to do that.
Click to expand...
Click to collapse
I flashed cm7 without flashing cwm and am now in a boot loop. Any ideas ?
I have a 16 gb trying to go from cm9 back to cm7
sailerph said:
I flashed cm7 without flashing cwm and am now in a boot loop. Any ideas ?
I have a 16 gb trying to go from cm9 back to cm7
Click to expand...
Click to collapse
Did you flash cm7 from clockworkmod running off an sdcard?
Cubanluke88 said:
Did you flash cm7 from clockworkmod running off an sdcard?
Click to expand...
Click to collapse
Yes, After flashing cm7 and gaaps,wipe and re-boot I'm in bootloop. For now I am running cm7 off sd card fine, but hope to fix internal ? Also, while in cmw from sd card, I get the error message after flashing "can't mount E recovery". There is probably the culprit ?
I'm not sure to be honest. Try flashing a different rom and see if you can boot.
You could also flash the zip for internal clockworkmod if you like, via the sdcard clockworkmod.
sailerph said:
Yes, After flashing cm7 and gaaps,wipe and re-boot I'm in bootloop. For now I am running cm7 off sd card fine, but hope to fix internal ? Also, while in cmw from sd card, I get the error message after flashing "can't mount E recovery". There is probably the culprit ?
Click to expand...
Click to collapse
That is normal after flashing rom on this device.
Cubanluke88 said:
I'm not sure to be honest. Try flashing a different rom and see if you can boot.
You could also flash the zip for internal clockworkmod if you like, via the sdcard clockworkmod.
Click to expand...
Click to collapse
Thanks for the help thus far, but none of the above work. I also tried the repart.img from Raywaldo tutorial and it doesn't finish.I also tried AdamOutler wipe/ubunto method and it gets stuck at writing zeros to mlo. The roms seem to flash ok, but can't boot into it without a loop. I suspect partitions are messed up if someone can point me in the right direction. So it looks like TWRP caused this when reverting to cm7 from cm9 Thanka again
sailerph said:
The roms seem to flash ok, but can't boot into it without a loop. I suspect partitions are messed up if someone can point me in the right direction. So it looks like TWRP caused this when reverting to cm7 from cm9 Thanka again
Click to expand...
Click to collapse
If it is a partition issue, then this thread should be able to help:
http://forum.xda-developers.com/showthread.php?t=1570022
The first method worked for me, although I did flash a clean CM7 install instead of 1.4.2 at the end.
Also, you shouldn't need to make a.CWM sd card, since you can reach recovery.
Just download "acclaim_update.zip" from XDA and then go in and navigate to "updater_script" which is located in "META-INF/com/google/android/" edit the first two lines and where it says "blaze" change to "acclaim" on both lines and update your zip file or rezip it whatever you do and you can now flash it in CWM or TWRP.
mamifsidtect said:
Just download "acclaim_update.zip" from XDA and then go in and navigate to "updater_script" which is located in "META-INF/com/google/android/" edit the first two lines and where it says "blaze" change to "acclaim" on both lines and update your zip file or rezip it whatever you do and you can now flash it in CWM or TWRP.
Click to expand...
Click to collapse
So how do I edit those lines ? I can view it in Winrar, but how do I edit it exactly. It won't let me simply cut and replace Thanks
sailerph said:
So how do I edit those lines ? I can view it in Winrar, but how do I edit it exactly. It won't let me simply cut and replace Thanks
Click to expand...
Click to collapse
I'd recommend getting something like notepad++ as notepad will not display the file very cleanly, and wordpad will add extra characters. Extract the file out of the zip, to say your desktop. Open it with notepad++. Edit what you like, save the file. Drag it back into the original place in the zip. Winrar will update the file in the zip. Make sure you extract the file though, if you try opening it directly from the zip, you're just going to be working on a temp copy of the file.
If you suspect that your partitions are messed up there are some threads about repartitioning. You can follow them up until you're supposed to start changing partitions to see if yours are the same as what their original ones were.
Can you boot the internal recovery still? I've seen a few posts about the CWM that come with CM7 and CM9 not being compatible with the other version. Perhaps try Indirect's Flasher.
Next time though, you should ask your question in a new thread since it's not really on topic with the OP and thread topic. Your question refered to a bootloop... The OP referred to returning to stock. By keeping the threads on topic to their content, it helps make searching easier for other people who may need the help.
Yes, notepadd++ --> On its menu, go to edit, and then to Eol Conversion to choose between :
windoze - cr/lf - od/oa ( hex )
unix - - lf - oa
mac - - cr - od
.
( of course ) we want the second choice...
ShinnAsuka said:
Well since you have a custom recovery the only way you can get to stock is to use adamoitlers total wipe flash back to stock and root from there. You could try flashing some stock recovery but it is a bit risky IMO.
Sent from my Nook Tablet CM7 BETA using xda premium app
Click to expand...
Click to collapse
That worked but I can't register with B&N. We need noob instructions on getting the correct serial # back in the tablet Thanks
sailerph said:
That worked but I can't register with B&N. We need noob instructions on getting the correct serial # back in the tablet Thanks
Click to expand...
Click to collapse
you can bypass registration by pressing on certain parts of the screen. look it up in one of the threads or on youtube.
Sent from my Nook Tablet CM7 BETA using xda premium app
ShinnAsuka said:
you can bypass registration by pressing on certain parts of the screen. look it up in one of the threads or on youtube.
Sent from my Nook Tablet CM7 BETA using xda premium app
Click to expand...
Click to collapse
Thanks, but I don't understand. What good is stock without registration ?
sailerph said:
Thanks, but I don't understand. What good is stock without registration ?
Click to expand...
Click to collapse
oh I thought you just wanted a custom rom experience. my bad. never mind...
Sent from my Nook Tablet CM7 BETA using xda premium app
help.
wont boot past cwm recovery window on the internal card
reflashing to the cm-7-team-b-beta1-signed.zip does not remedy it
recovery window has errors
E:Can't mount /cache/recovery/command
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
should i try the unbuntu fix ?
i know nothing about adb and or drivers for android devices btw... so unless the guide is VERY detailed im boned
maxxcool7421 said:
help.
wont boot past cwm recovery window on the internal card
reflashing to the cm-7-team-b-beta1-signed.zip does not remedy it
recovery window has errors
E:Can't mount /cache/recovery/command
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
should i try the unbuntu fix ?
i know nothing about adb and or drivers for android devices btw... so unless the guide is VERY detailed im boned
Click to expand...
Click to collapse
Thats how my tablet got fixed, use the ubuntu method and let me know if you have troubles flashing it I'll be glad to help you, I've done it 3 times lol
megaghostgamer said:
Thats how my tablet got fixed, use the ubuntu method and let me know if you have troubles flashing it I'll be glad to help you, I've done it 3 times lol
Click to expand...
Click to collapse
No dice, hangs on "writting zeros's to ml0" ... i see a alternative method that does the same thing... guess i will try it..
maxxcool7421 said:
No dice, hangs on "writting zeros's to ml0" ... i see a alternative method that does the same thing... guess i will try it..
Click to expand...
Click to collapse
What SD Card do you have and what class? Sorry I fell asleep but im back on. Also what GB Tablet do you have and what are you running? Can you still boot up and is there anywhere you can get to factory reset ( clear data ) cause thats whats looking like your problem. I had that problem on my HTC Hero CDMA I freaked and then I cleared data and rebooted back into recovery and error was gone
megaghostgamer said:
What SD Card do you have and what class? Sorry I fell asleep but im back on. Also what GB Tablet do you have and what are you running? Can you still boot up and is there anywhere you can get to factory reset ( clear data ) cause thats whats looking like your problem. I had that problem on my HTC Hero CDMA I freaked and then I cleared data and rebooted back into recovery and error was gone
Click to expand...
Click to collapse
I did the exact same thing with rom manager on the NT. :< There should be big flashing warning signs that say "DONT DO THIS IF YOU'RE TIRED"
I wound up having to ADB to the device, completely wipe the partition table with gdisk, then rebuild it. However, the scripts to acutally format it werent avaliable anymore (Dropbox account was banned) so I then had to use the Ubuntu restore method to go from there.
I did loose the ability to run the B&N Factory ROM (wont pass registration anymore)
but at least the tablet is useable.
Dont give up, from what I understand, unless you physically BREAK the tablet in some way, its nearly always recoverable!
lag0matic said:
I did the exact same thing with rom manager on the NT. :< There should be big flashing warning signs that say "DONT DO THIS IF YOU'RE TIRED"
I wound up having to ADB to the device, completely wipe the partition table with gdisk, then rebuild it. However, the scripts to acutally format it werent avaliable anymore (Dropbox account was banned) so I then had to use the Ubuntu restore method to go from there.
I did loose the ability to run the B&N Factory ROM (wont pass registration anymore)
but at least the tablet is useable.
Dont give up, from what I understand, unless you physically BREAK the tablet in some way, its nearly always recoverable!
Click to expand...
Click to collapse
Yup true! To pass sign up, http://www.youtube.com/watch?v=sAASnHPn4PM&feature=youtu.be by albert wertz.
megaghostgamer said:
What SD Card do you have and what class? Sorry I fell asleep but im back on. Also what GB Tablet do you have and what are you running? Can you still boot up and is there anywhere you can get to factory reset ( clear data ) cause thats whats looking like your problem. I had that problem on my HTC Hero CDMA I freaked and then I cleared data and rebooted back into recovery and error was gone
Click to expand...
Click to collapse
Ha! maybe im not that dumb after all. although the ubunut failed, the tool here worked http://forum.xda-developers.com/showthread.php?t=1663836 but /slap! forhead/ i still have the cym recovery img on the unit ... so i think i will try this:
go back and set up the SD cm7 alpah boot that worked to boot the SD
boot in and update rom manager
install stock recovery img
then try the new link again!
as for the stick:
Sandisk - its pretty generic and came with my htc glacier...
16 bg nook table
it came with 1.4.1 image
put on cm-7-b-teamb-signed
installed few apps, *tried* to start installing gapps to get gplay and the google framework
then i got a splat
then i flashed it back again
seemed ok
it wasnt
it locked up
powered down
reboot = duuurp
after that i did not READ... booted into recovery and selected (wait for it) reset.. and cleared the user data.
after that i swore enough to get people to come to my office and look concerned... took advil... read.... cried... threatened...
now im here
maxxcool7421 said:
Ha! maybe im not that dumb after all. although the ubunut failed, the tool here worked http://forum.xda-developers.com/showthread.php?t=1663836 but /slap! forhead/ i still have the cym recovery img on the unit ... so i think i will try this:
go back and set up the SD cm7 alpah boot that worked to boot the SD
boot in and update rom manager
install stock recovery img
then try the new link again!
as for the stick:
Sandisk - its pretty generic and came with my htc glacier...
16 bg nook table
it came with 1.4.1 image
put on cm-7-b-teamb-signed
installed few apps, *tried* to start installing gapps to get gplay and the google framework
then i got a splat
then i flashed it back again
seemed ok
it wasnt
it locked up
powered down
reboot = duuurp
after that i did not READ... booted into recovery and selected (wait for it) reset.. and cleared the user data.
after that i swore enough to get people to come to my office and look concerned... took advil... read.... cried... threatened...
now im here
Click to expand...
Click to collapse
Personally. I wouldnt mess with Rom Manager. That's what bricked my tablet, too.
Just make an SD card with the CWM bootables (I posted a link in your other post about noob questions) and install roms/etc from there.
I think that's what's killing my gnex!
*This Jedi master be a Ninj-ESS*
hrm i missed it? (the other thead link to bootable cym)? i did try to repartition once on another bootable build but the cym did not like it... even after reinserting it
i had that problem before because i accidently formatted the 1gb user partition while in cm7...
this link saved me. try it out!
http://forum.xda-developers.com/showthread.php?t=1513583
still bricked. *tried* to use rom manager to install the "stock recovery" but it still boots to a "cardboard box".......
starting to think the partitions are whacked...
what is the best partition recovery guide ??
looking at this link...
http://forum.xda-developers.com/showpost.php?p=22157605&postcount=25
but the bootable cwm is not loading...grr
If I am correct you are still trying all of this from inside a bootable cm7 card, right?
Instead, try this http://forum.xda-developers.com/showthread.php?p=25786947
With that hopefully you can get a bootable cwm recovery image.
From there you should be able to install CM7.
I CANNOT STRESS ENOUGH. DO NOT USE ROM MANAGER.
I honestly think it is most of your problems
Sent from my Nook Tablet using xda app-developers app
lag0matic said:
If I am correct you are still trying all of this from inside a bootable cm7 card, right?
Instead, try this http://forum.xda-developers.com/showthread.php?p=25786947
With that hopefully you can get a bootable cwm recovery image.
From there you should be able to install CM7.
I CANNOT STRESS ENOUGH. DO NOT USE ROM MANAGER.
I honestly think it is most of your problems
Sent from my Nook Tablet using xda app-developers app
Click to expand...
Click to collapse
i think i am ready to agree about rom manager... will try the link in a sec.. thanks
not to sound entirely stupid... should i use the 8-16gig recovery? or the 16gig recovery? :silly::silly::silly:
16 gig. Assuming you have a 16gig NT!
Sent from my Nook Tablet using xda app-developers app
maxxcool7421 said:
not to sound entirely stupid... should i use the 8-16gig recovery? or the 16gig recovery? :silly::silly::silly:
Click to expand...
Click to collapse
meh, balls out, lets go 8-16 1st
!!! ok got into recovery console ....
maxxcool7421 said:
!!! ok got into recovery console ....
Click to expand...
Click to collapse
now looking up how to use then connect via adb and run these commands... http://forum.xda-developers.com/showpost.php?p=22157605&postcount=25
Hello there guys so I'm here because I did a very silly mistake related to the CWM for the Galaxy Player 4.2 (Or at least that's what I think I did ).
Related to this thread: http://forum.xda-developers.com/showthread.php?p=39344227
Anyway I'm not familiar with CWM since the Galaxy Player 4.2 is my first Android device ( And is not like the device has been easy on us right ), my device is rooted and the problem is that I already got the Kernel on my device and as expected I'm without WiFi. How can I configure the CWM Recovery without WiFi, if not, how can I get WiFi back?.
Sorry for bothering with dummy questions/mistakes and thanks in advance .
PerChloric Bread said:
Hello there guys so I'm here because I did a very silly mistake related to the CWM for the Galaxy Player 4.2 (Or at least that's what I think I did ).
Related to this thread: http://forum.xda-developers.com/showthread.php?p=39344227
Anyway I'm not familiar with CWM since the Galaxy Player 4.2 is my first Android device ( And is not like the device has been easy on us right ), my device is rooted and the problem is that I already got the Kernel on my device and as expected I'm without WiFi. How can I configure the CWM Recovery without WiFi, if not, how can I get WiFi back?.
Sorry for bothering with dummy questions/mistakes and thanks in advance .
Click to expand...
Click to collapse
You need to flash the wifi patch using clockworkmod.
Sent from my ZX Spectrum
joemhewitt said:
You need to flash the wifi patch using clockworkmod.
Sent from my ZX Spectrum
Click to expand...
Click to collapse
Can I flash the fix without CWM, for example with Odin?. I'm having a really hard time here, since I was dumb enough to install the Kernel without configuring the CWM before or at least making sure I could do it without the WiFi. Now the problem is when I want to flash with Rom Manager it says I need the recovery since I'm not a premium but again in order to get the recovery I need WiFi internet :/.
PerChloric Bread said:
Can I flash the fix without CWM, for example with Odin?. I'm having a really hard time here, since I was dumb enough to install the Kernel without configuring the CWM before or at least making sure I could do it without the WiFi. Now the problem is when I want to flash with Rom Manager it says I need the recovery since I'm not a premium but again in order to get the recovery I need WiFi internet :/.
Click to expand...
Click to collapse
Wow it's the first time I see somebody having more problems with CWM than odin (no offense). Actually all you need to do is to put the patch into your device and then boot into CWM. Once into CWM, go into install zip from sdcard, then chose zip from sdcard and chose your patch zip. Once you choose it, you will see a bunch of no and one yes, check yes and it will patch it. Once it's done, reboot your device.
Hope it helps.
I'd like to know if flashing the kernel with CWM will make loose data, apps and preferences ? Thanks.
sinbad21 said:
I'd like to know if flashing the kernel with CWM will make loose data, apps and preferences ? Thanks.
Click to expand...
Click to collapse
As far as I can see, nobody have problems flashing it so you should be good to go! :good:
zaclimon said:
As far as I can see, nobody have problems flashing it so you should be good to go! :good:
Click to expand...
Click to collapse
You're right, it works fine ! Now I have a question : I tried a backup in CWM, system and data have been backed up, but neither applications nor cache.
I got the following error messages :
Code:
No /sdcard/.android_secure found. Skipping backup of applications on external storage.
Backing up cache...
No sd-ext found. Skipping backup of sd-ext.
Any idea ?
sinbad21 said:
You're right, it works fine ! Now I have a question : I tried a backup in CWM, system and data have been backed up, but neither applications nor cache.
I got the following error messages :
Code:
No /sdcard/.android_secure found. Skipping backup of applications on external storage.
Backing up cache...
No sd-ext found. Skipping backup of sd-ext.
Any idea ?
Click to expand...
Click to collapse
/sdcard/.android_secure is the directory of the download of big apps (for example apps like nova or subway surfers I think) Cache has been backed up. Don't worry, all your things has been backed up.
zaclimon said:
Wow it's the first time I see somebody having more problems with CWM than odin (no offense). Actually all you need to do is to put the patch into your device and then boot into CWM. Once into CWM, go into install zip from sdcard, then chose zip from sdcard and chose your patch zip. Once you choose it, you will see a bunch of no and one yes, check yes and it will patch it. Once it's done, reboot your device.
Hope it helps.
Click to expand...
Click to collapse
Man, I feel so stupid right now . I managed to run the CWM boot now when I try to install the zip the update. Says:
"E: failed to verify whole-file signature
E: signature verification failed
Installation aborted"
Maybe I should tell you everything I did just in case.
I had the device already rooted.
Flashed the kernel
Installed the CWM v5.0.2.7
Transfered the Fix zip to sdcard
then I did everything you said and also tried to disable verification and still failed.
Sorry to be bothering U_U.
Ok I finally fixed everything... It was my external sd after all, it wasn't functioning properly. Tried with another Sd card and now it's working. Thanks you for your patience and help
Sent from my YP-GI1 using xda app-developers app
PerChloric Bread said:
Ok I finally fixed everything... It was my external sd after all, it wasn't functioning properly. Tried with another Sd card and now it's working. Thanks you for your patience and help
Sent from my YP-GI1 using xda app-developers app
Click to expand...
Click to collapse
Nice to see it working!! :good:
zaclimon said:
/sdcard/.android_secure is the directory of the download of big apps (for example apps like nova or subway surfers I think) Cache has been backed up. Don't worry, all your things has been backed up.
Click to expand...
Click to collapse
Fine, thank you
sinbad21 said:
Fine, thank you
Click to expand...
Click to collapse
No wait android secure is apps transferred to sd card instead that they're using the internal storage.
Sent from my Nexus 7 using Tapatalk HD
zaclimon said:
No wait android secure is apps transferred to sd card instead that they're using the internal storage.
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
So I suppose that I've no such apps, as I don't have any .android_secure directory in /
Also, cwm backup seems to ignore backup of boot.image and recovery image. There is not even an error or warning message.
Hi everyone
I've downloaded and installed MIUI v5 4.1.3 and today it says I should upgrade to a new version. and I prefer to upgrade because of some bugs.
after I click the version in updater app, it says you should reboot your phone and continue it from CWM.
when I reboot and installing it from CWM suddenly it crashes, and the dead android image appear on the background. after rebooting the device it's still on the pre-version.
How I should upgrade this ROM without loosing any data and app?
_alireza said:
Hi everyone
I've downloaded and installed MIUI v5 4.1.3 and today it says I should upgrade to a new version. and I prefer to upgrade because of some bugs.
after I click the version in updater app, it says you should reboot your phone and continue it from CWM.
when I reboot and installing it from CWM suddenly it crashes, and the dead android image appear on the background. after rebooting the device it's still on the pre-version.
How I should upgrade this ROM without loosing any data and app?
Click to expand...
Click to collapse
Flash Philz recovery go to advanced backup data only,then full wipe, then flash new rom and finally restore data.
tallman43 said:
Flash Philz recovery go to advanced backup data only,then full wipe, then flash new rom and finally restore data.
Click to expand...
Click to collapse
thanks, full wipe is really necessary?
_alireza said:
thanks, full wipe is really necessary?
Click to expand...
Click to collapse
Not necessary but you may have problems! When I say full wipe use Philz install a new rom settings in Wipe/Data/Factory Reset menu the second option clean to install new rom.This will leave your internal and external SD cards alone.
tallman43 said:
Not necessary but you may have problems! When I say full wipe use Philz install a new rom settings in Wipe/Data/Factory Reset menu the second option clean to install new rom.This will leave your internal and external SD cards alone.
Click to expand...
Click to collapse
once again thanks
another silly question, should I do all of these steps on my external SD or I can install new ROM from Internal SD?
_alireza said:
once again thanks
another silly question, should I do all of these steps on my external SD or I can install new ROM from Internal SD?
Click to expand...
Click to collapse
You can install from internal because PhilZ recovery does not wipe internal card (unless you ask it to) but I would recommend installing all roms from external in-case for some inexplicable reason your internal gets wiped you would then have no rom to install
When ever you need to update or install new roms always keep on external sd card thats best practice.
If this is OTA Update you just need to go into recovery and try manual updation using install from a file. Goto internal sd card 》 miui 》 and select the file which just came during updation. You can recognize by version number.
If this is zip file dowloaded then it better to have backup first using the TWRM or philz recovery in external sd card. Then flash the zip.
The reason being the update script might have lines of code to format the data/cache/system/delvick. Which in turn you will loose your data after updation.
Note again backup using recovery on external card can help you recover you stuff any time
Cheers
Sent from my GT-N7105 using xda app-developers app
kat0072 said:
When ever you need to update or install new roms always keep on external sd card thats best practice.
If this is OTA Update you just need to go into recovery and try manual updation using install from a file. Goto internal sd card 》 miui 》 and select the file which just came during updation. You can recognize by version number.
If this is zip file dowloaded then it better to have backup first using the TWRM or philz recovery in external sd card. Then flash the zip.
The reason being the update script might have lines of code to format the data/cache/system/delvick. Which in turn you will loose your data after updation.
Note again backup using recovery on external card can help you recover you stuff any time
Cheers
Sent from my GT-N7105 using xda app-developers app
Click to expand...
Click to collapse
I tried to update OTA version like you said. But in recovery when I want to flash the update file after couple seconds it fails and broken android image will appear. After i restart the phone it is still on previous version. My phone is galaxy siii.
Sent from my GT-I9300 using XDA Premium 4 mobile app
_alireza said:
I tried to update OTA version like you said. But in recovery when I want to flash the update file after couple seconds it fails and broken android image will appear. After i restart the phone it is still on previous version. My phone is galaxy siii.
Sent from my GT-I9300 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Can you please post the Error details why its failing or better screenshot ?
kat0072 said:
Can you please post the Error details why its failing or better screenshot ?
Click to expand...
Click to collapse
Sure
Sent from my GT-I9300 using XDA Premium 4 mobile app
_alireza said:
Sure
Sent from my GT-I9300 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
From the screen shot it looks its trying to patch the old ROM with some exisitng library. It failing because may be the lib expecting does not exists or belongs to different version on ROM file.
It tough to to corelate the stuff which is mention in Updater script. You might need to take a look on this file and verify its action against the existing system. Take a look on zip file >> META-INF >> com >> google >> android >> updater-script.
_alireza said:
Sure
Sent from my GT-I9300 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Your using a older version of PhilZ recovery try this one >> http://goo.im/devs/philz_touch/CWM_Advanced_Edition/i9300 << if it still persists try downloading rom update again it may be a corrupt file.