Related
What cases are you chaps investing in to protect your Heros?
Have not seen any yet. Not sure if I should get one or not I did not get one for the Diamond and that is in great nick
New mobiles make me nervous...........
If you have the white... with Teflon coating and a good screen protector I would imagine that a case isn't necessary.
You haven't witnessed my ability to juggle mobiles and drop things out of pockets onto concrete
Also, when locking onto GPS signals, putting phones on window ledges and watching in horror as they drop 30 foot to paving slabs.....oh yes.....
Been there....done that!
cbailey said:
You haven't witnessed my ability to juggle mobiles and drop things out of pockets onto concrete
Also, when locking onto GPS signals, putting phones on window ledges and watching in horror as they drop 30 foot to paving slabs.....oh yes.....
Click to expand...
Click to collapse
i will be keeping a firm grip on my hero....
my old diamond was always trying to jump out of my hand
Mine will reside in my pocket, next to my homekeys, some coins and lint.
I like to put mine in a belt case while at work as I'm always running about. Apart from that a good screen protector normally does the trick
Soon available at www.noreve.com (high quality cases)
I'v tried all the high street stores, and nothing, 99% of mobile shops don't even know what the HTC hero is and 95% of them only sell iPhone crap and nothing else, the worlds getting taken over by sheeps with iPhones
Original HTC Pouch
I bought this:
https://www.expansys.at/d.aspx?i=184424
...and unfortunately, it's crap. My white Hero has now some black parts and looks already old.
So, don't buy this if you have a white Hero. No problem whit a black one, I guess
schauol1 said:
I bought this:
https://www.expansys.at/d.aspx?i=184424
...and unfortunately, it's crap. My white Hero has now some black parts and looks already old.
Click to expand...
Click to collapse
I got this for free (http://www.handtec.co.uk) and so far no smudges. I tried rubbing some white plastic (NOT my Hero) on the inner leather lining, and with considerable effort I can rub off some black colour. After cleaning the white plastic piece it was bright white again, maybe you want to give it a try.
The case is a bit tight, though. On the other side, the phone can't fall out even if the magnetic latch opens accidentally ;-)
Overall, I'd give it 7/10 (good but not great).
Foof case for my Hero
At the moment I'm using a Foof case with a sherpa fleece inner. Its surprisingly protective and fits perfectly. Snug enough not to slip out but easy to remove. Got the ipod touch size from http://foofshop.com/ and they have great choices for different colours.
I've got this pouch:
http://www.krusellcases.com/uk/p_krusell_product.aspx?i=179446
Just what I wanted so far, it protects the phone and is rather slim. I didn't want more bulk in my pants pocket. The Hero fits quite ok, maybe it's a wee bit too wide, but not much.
Edit:
I'm gonna return the Pouch to the shop. The inner part (as well as the exterior) is made of a leather-like matherial in black color. The first days it was ok, but it has started to leave black stains on my white Hero. I was able to remove them really easily but I'm not happy anymore. I'll go check if its a defect in my pouch or all these models leave stains. I don't recommend it anymore.
tallen3 said:
At the moment I'm using a Foof case with a sherpa fleece inner. Its surprisingly protective and fits perfectly. Snug enough not to slip out but easy to remove. Got the ipod touch size from http://foofshop.com/ and they have great choices for different colours.
Click to expand...
Click to collapse
That foofcase looks great..ordered two
I've got this pouch
http://www.mp3shop.nl/product/72567/50854/puro-nabuk-case-red-ipod-touch-iphone.html
The perfect fit for my Hero, and it is slim.
I bought my on expert in Sweden
batteries?
anyone find any good deals on replacement batteries that hold more power?
sprinkles said:
anyone find any good deals on replacement batteries that hold more power?
Click to expand...
Click to collapse
Why would you post this here, rather than the thread about batteries?
I do not have a Hero yet, but I do plan on getting on when it is released in the US. Anyway...
Have you guys ever heard of SwitchEasy? They make cases for the iPhone and they are my favorite case maker, and I was planning to get a case from them as I was originally planning to buy an iPhone about a year ago. However, I did buy one for my girlfriend about a week ago and she LOVES it. I waited on buying that iPhone and out came the Hero.
I recently sent them an email to see if they would ever consider ever making a phone case for the Hero. Unfortunately, that was about 2 days ago and have not had a reply...
Perhaps if we can get enough people to send them emails so that they can realize how many people have Heros (and provided you like their cases ) we can get them to manufacture some cases and add a bit more selection to the slim pickings so far.
I am not trying to promote their products or site in any way, but if you like the style of their cases like I do, I would definitely like to see a case from them for the Hero. Was just wondering if we can do a group effort here.
If this post violates any rules that this forum has, please delete or mod it. Thank you!
I'm using the HTC belt holster that I got for my Diamond. It's a nice tight secure fit. The Diamond used to wobble around in it.
Hi there
I'm new here and my English is not that good, so sorry for any mistakes I made.
I'm using a T-mobile TP2 (may be not using I just waiting for it to be delivered)
>>>>> I wondered that why there no body talking about " The Bodyguardz "
at all? Is it not good? ( cuz I just purchased 1)
All I heard is the story about the Invisibleshield but according to the pictures
shown in both websites I though that Bodyguardz is more protective because
it also protect the rear sides around the phone. In contrast, the
Invisibleshield is just on the back and front side of the phone.
Moreover, one box of the Bodyguardz has 2 set of the films in it, although
the price per box is higher.
So I just wonder that is it not good? (the Bodyguardz)
I would highly reccomend the bodyguardz skin over any other skin. i had it for my android and the texture and feel is really good. i compared it to my friends invishield and the invishield is not good at all. it makes the screeen not as responsive and it feels sqishy as opposed to bodyguardz that feels hard but not to hard.
customer service at bodyguardz is great. it also comes with to body guards. invishield only comes with one. they both have "free" lifetime replacements.
(i mean invisibleshield)
i use to promote and love zagg but after two mysterious scuff that cant be remove i decide to go with bodyguardz...they are much better plus you get 2 instead of one and shipping is much faster and much better customer service
mmafighter077 said:
I would highly reccomend the bodyguardz skin over any other skin. i had it for my android and the texture and feel is really good. i compared it to my friends invishield and the invishield is not good at all. it makes the screeen not as responsive and it feels sqishy as opposed to bodyguardz that feels hard but not to hard.
customer service at bodyguardz is great. it also comes with to body guards. invishield only comes with one. they both have "free" lifetime replacements.
Click to expand...
Click to collapse
Thanks, mate it's good to hear that!
Yes, I agree that their services is quite good.
Do you have any special techniques or tips&tricks concerning the installation process to share?
I think it's harder to install the Bodyguardz compared to Invisible shield becaus the Bodyguardz had many small rear pieces.
just few things...
be patient and the blow dryer is your friend. fyi... if you order more bodyguardz dont order the liquid. they will give you one with every order. with that said dont be scared to be generous with the liquid while applying.
You guys helped me to make my decision. I'm going to order a Bodyguardz kit. Thanx.
I also bit the bullet and ordered a Bodyguardz kit--will let you guys know how it goes.
Hi there shawndh and nuron!
Nice to have you guys on board. Hope you could share some experiences or tips & tricks
after you applied it. I'm waiting for it to arrive too and start to worried about the
installation processes.
Don't forget to let us know how it goes. : )
Cheers!
bodyguardz
Hello everyone
Dude, my english is not very strong either lol, since we r both Thai rite, I mean Mr.what150 and I, lol. However, I hav a question.
I just hav my Invisible Shield installed on my standard HTC TP2 and I agreed that I don't really feel comfortable with it, u know, kind of rubber feel
Also, it doesn't cover the whole thing like bodyguardz, just half of the chrome part T_T. Is there any bodyguard on sell on Internet fer mai EUROPEAN standard HTC TP2? If there's any, please.
p.s. somebody says the bodyguards protection quality is not as good as Invisible Shield's ? Is that true ?
what150, mines is schedule to arrive in like September 9th because I picked the free shipping haha. From the instructional videos, it looks like keeping your hands and phone clean and using the solution is the key. For the corners and edges, they recommend using a blow dryer in 5-second intervals in order to get them sticky again if it is too wet.
Zagg for Touch Pro 2
I bought a Zagg invisibleSHIELD for the stock HTC TP2 which is what they had for my T-Mobile TP2 and after one hour got it on as best as I could. Looked like [email protected] Then I read that Zagg was making a T-Mobile model. So I got an RMA number for a HTC model and was told to buy a T-Mobile TP2 one. Well I used the one on my phone and noticed that as time went one the top front cover was peeling back more and more (I keep my phone in my jean pocket). Well I got to look at the Zagg website and I see that the T-Mobile one covers the front and back with no wrap over the top. If this is the case then the peeling will happen again with the new T-Mobile TP2 model. Can anyone confirm this design?
TIA,
Does anyone know if Zagg's invisible shield or Bodyguardz' protective film for european Touch Pro 2 will fit ATT Tilt2? Thanks
I had a similar question. I have the EU version, unbranded, and am wondering if the form factor is the same as the AT&T model. The button placement on the front looks to be identical. Can you post a picture of your battery cover?
Here we go. Looks like EU TP2, except PTT button.
Thanks for the pics. You're right, it looks like my European model. I like the color of yours better though The form seems to be the same on the backside too. Hope someone can speak to your original question for you.
My Tilt2 is arriving today and my Zagg is arriving in a couple days, so if you can wait that long and no one has supplied a sufficient response yet, I will let you know how it fits.
theskeels said:
My Tilt2 is arriving today and my Zagg is arriving in a couple days, so if you can wait that long and no one has supplied a sufficient response yet, I will let you know how it fits.
Click to expand...
Click to collapse
That would be great! Anyway, i decided to experiment a little and ordered the full set from Bodyguardz. Will let you know as well how it works
I got a rubberized hard plastic shell designed for the European model and fits the Tilt 2 quite nicely. The only drawback is there is no cutout for the PTT button. Other than that I cannot find anything wrong with the European case being used with the Tilt 2.
Thanks for the info. That should indicate that on the outside at least the two shells are the same, with the exception of the PTT button anyway ( and maybe a forward facing camera on the EU model?). I'm thinking that the screen savers and clear vinyl "cases" will be mostly interchangeable between the two types as well.
Saw this posted on another forum. I don't have any experience with this brand myself, but looks familiar to the Zagg product and it is specifically for the Tilt2:
http://www.clearprotector.com/atandt-htc-tilt-2-extended-protector.html
If memory serves this is the company that I bought a similar case from for my Wizard. Thanks for the link. I've been using the case that came in my box and like it a lot. It's slim and provides sufficient protection. This protector should complement it well, and allow me to leave the phone out of the case while driving without having to worry so much about it sliding around and getting scratched up.
I just ordered one (extended protector), for my unbranded phone and will let you know what I think of it when I get it, as well as what they're customer service is like.
These cases can be tough to get on, and you have to accept the feel of the edges of the material when handling the device after installation. But they do provide a good grip to help prevent the slippery little buggers that our phones are from jumping out of your mitts. And the material is tough to say the least. Once they're on right, they stay put and do the job.
I just looked on the bodyguardz website and saw that they have a kit for the Tilt2 now. I should have it later this week. I will post updates once I put it on.
Don't mean to hijack......
Don't mean to hijack the thread but do any of you use either of these products with a leather pouch/sleeve like an EaseCase. I'm wondering if there will be any peeling issues when sliding the device in and out of the case.
Received the TP2 kit today, just applied it to the phone. Came out ok, but the only thing that doesn't match is the front camera hole, so I left the original protector on; and I had to cut off a small peice of protector from the side for the PTT button. Probably I will try another set from somebody else.
How did they work out?
theskeels said:
My Tilt2 is arriving today and my Zagg is arriving in a couple days, so if you can wait that long and no one has supplied a sufficient response yet, I will let you know how it fits.
Click to expand...
Click to collapse
edskii said:
That would be great! Anyway, i decided to experiment a little and ordered the full set from Bodyguardz. Will let you know as well how it works
Click to expand...
Click to collapse
Did you guys have any success?
I just got a invisible shield for my tilt 2, just for the screen. It's designed for the OEM TP2, because mine had the tiny hole on the top right for the front facing camera, which the Tilt2 does not have. Other than that, perfect fit.
I like the new sponge that comes in the kit, easier to use than spraying the screen with the wetting agent.
For anyone interested in bodyguardz, now is a good time to order. They already include the 25% discount for Christmas and if you use coupon 155A6 you get another 20% off!!
p51d007 said:
I just got a invisible shield for my tilt 2, just for the screen. It's designed for the OEM TP2, because mine had the tiny hole on the top right for the front facing camera, which the Tilt2 does not have. Other than that, perfect fit.
I like the new sponge that comes in the kit, easier to use than spraying the screen with the wetting agent.
Click to expand...
Click to collapse
Does The Isheild cover the chrome painted rim around the screen? This is what gets damaged most readily (I Know I have dropped mine out of my pocket while ridding my bike on Highway 50 in Orlando, FL.).
Anyone please reply who has a Tilt2 & Zagg Isheild installed? Does it cover the chromium = )
No, it doesn't cover the chrome. For me the screen protector also didn't fit quite right. In the process of removing and reapplying it, I have now managed to stretch it out (which necessitated cutting around the speaker so I could hear) and got all sorts of fingerprints and whatnot under it, making it useless in sunlight.
Many of the major malls in the U.S. have "kiosks" that will do a custom install.
My buddy had his ENTIRE TP wrapped, including the chrome.
I wanted to make a new thread, but decided not to clutter the board and instead ask in a couple threads for some pictures. Can anyone with the Gadgetshieldz for the ATT Tilt 2 post some hi-res images so I can see what it looks like and how it fits around the corners and sides? Thanks
While there are two distinct OP's regarding skins in this section, there is not set place to see pictures of then without scrolling through 100's of pages to find them.
What I have below is a consolidated picture OP of the skins that I have and future skins to make choosing which skin you want easier. So far I have tried dbrand and Slick Wraps skins for my Nexus 6 and I will write my thoughts of both companies down below as well. I am a bit of an accessories hoarder when it comes to my phones so I'm happy to share more about each one with the forum. I will be buying more skins and updating my OP when I get them with plenty of pictures, don't be afraid to ask for more pictures because I have a plethora of them.
dbrand: dbrand.comdbrand.com
I have been ordering from dbrand for a while now, and I enjoy their skins. They have a nice amount of customization when it comes to phones especially the Nexus line. dbrand offers accents, back skins as well as front skins and you can order them in any arrangement that you choose. Their skins are made with 3M vinyl which means the material is the best quality they can use for skins. The color choices that dbrand offers are fairly standard, but not near as large as some other companies out there. The company ships from Canada which means you can expect the delivery time in the US to be 1-2 weeks. I've had orders take much longer than that (30+ days) but that is not normal and it is caused by USPS's slow movement. The cut of dbrand's skins is very precise leaving you with a virtually edge to edge fit. If you install the skin correctly you will have a fantastic looking device that is sure to attract many looks. I have people ask me if my phone was custom made and how did you get that back etc... with many of the skins that I have used including SW.
SlickWraps (SW): slickwraps.com
Initially I had some issues with SW not sending out shipping emails when I first purchased my Nexus skins. SW rep on the forum (usually Weston, but there are others who use the account) was nice enough to fix everything for me. I then ran into an issue with USPS delivering my package to the wrong address (the correct one was on there) but thats not SW's fault. They shipping my order out swiftly, and it arrived in about 5 days which is great compared to dbrand. SW also uses 3M vinyl which as mentioned above is the best material for skins. They also have custom colors made by 3M for them and a couple of other companies. Their color selection is superior to any other company so far, and they offer the Motorola "M" cutout on their Nexus 6 skins. Some people may like this while others may not (I personally like it). SW makes back skins, frame skins, and front skins which can give you a nice 360 degree coverage on your phone. SW also has a "goof" policy which states that SW will replace your skin if you "goof" up the install. This is great for those of us that aren't the best at installing skins or are new to it and make a mistake. Their skins fit is identical to dbrand in my experience so you don't have to worry about which one fits better. It's a matter of preference and what color/style of skin you want to buy. It should also be noted that SW does accept custom orders for skins. I ordered some without the Motorola "M" cutout and and another with just the Nexus "X". If you are on the edge between the two companies the option to have your skin customized should aide with that decision. If you contact Slickwraps (send Weston a message) with your order # and request he will do his best to accommodate you. I will post pictures of the "custom" ones I ordered below in addition to the regular skins.
I recommend both companies skins based on my experiences, and I hope this guide helps you decide what is better for you.
Carbon Fiber:
The texture is very subtle on this skin and it provides more grip than the stock plastic back. The look is unmistakably carbon fiber, but we know the skin is made out of vinyl. The skin itself is moderately reflective while maintaining the nice style of carbon fiber.
Red (dbrand)
Black (dbrand)
Blue (dbrand)
Green (SW)
Metal:
The texture of this is very similar to raw steel or aluminum with lines/ridges running along the vinyl. The feel is very slightly "ribbed" and is slightly more slippery than the carbon skins above. The skin is moderately reflective depending on which color you get. Each color has a "metal" like undertone if you look at it in the correct lighting.
Silver Titanium (dbrand)
Black Titanium
Leather:
This skin has a very nice leather look to it. There are a couple different styles of texturing as far as the leather look goes. I have the brown leather one pictured below for reference . The skin is not very reflective at all and has the most grip out of all of the textures. The feel is soft and very close to synthetic leather. My wife described it as a "snakeskin texture" and was quite impressed by it.
Brown (SW)
White "Alligator" (SW)
Color:
The "color" skins are exactly that, different colors without having any real texture. The skins have a low reflectiveness and are generally smooth with a very subtle texturing. Their texture is almost identical to the "matte" skins. There isn't much else to say about these, but note that they are more "grippy" than the factory back. These skins don't attract or show fingerprints from what I have seen.
Blue (dbrand)
Matte:
The matte skins are an almost identical texture to the color series which means they are generally very smooth. As the name suggests the skin is indeed "matte" with virtually no reflectiveness to it. The skins is quite "slippery" but it still has more grip that the phone without one.
Update: Other users have reported that they don't have any issues with fingerprints showing up. The fingerprints and oil issue may just be my hands, however I will see if other members experience the same thing that I did. As always everyone's experience can vary based on how "oily" their hands are naturally.
Black (dbrand)
Here are some quick guides that I made on installing and removing the vinyl skins:
Removal (Slickwraps)
https://www.youtube.com/watch?v=ueAoROEB_tY
Installation (Slickwraps)
https://www.youtube.com/watch?v=G_DXoYgpLEs
Installation of the dbrand front skin:
https://www.youtube.com/watch?v=coyWtBvN2WQ&feature=youtu.be
Installation of the SlickWraps side skin:
https://www.youtube.com/watch?v=gNjjziStkNo&feature=youtu.be
MODS:
Off topic discussion is allowed to an extent, but I do not want any "x company is better than y" or bashing in my OP. Personal experiences are okay as long as they follow the forums rules and don't "bash" any company in a manner which could be taken the wrong way.
Please be respectful of your fellow forums members and don't start any arguing in my OP or you will be reported. There is too much OT arguing on here lately and thats not what this forum is for. Remember we are all here to help each other
All of the Skins that I currently have together:
new pictures are in a post down below due the restriction of 60 images per post with the 'img' tag.(See post #4)
Update [12/20]
I will add/revise to this OP even though I no longer own a Nexus 6 (moved on to the 6P). I still have a fair amount of skins, and will gladly answer any questions regarding any of the ones in this OP or in general.
I've used multiple skins from both companies on my nexus 5 and i found both had pros and cons.
Here are my experiences.
dbrand:
Pros - great price, modular purchasing, quick delivery, great textures, thick vinyl (feels quality and durable) . good side parts.
Cons - my nexus just didn't want to align with the cut outs. Glue seeped from the sides and had to be trimmed otherwise a thick, white edge would be visible
Slickwraps:
Pros - for my nexus, a more accurate cutting, no seepage (except on one design which I got a free replacement for), great customer service
Cons - felt less textured and thinner. Didn't like how the sides fit as much.
These are my personal experiences with my nexus 5. They will differ to those of others.
Overall I've enjoyed using both and wouldn't hesitate to recommend either company. They're both really good at what they do. I've had both, I'll have both again.
Pilz said:
While there are two distinct OP's regarding skins in this section, there is not set place to see pictures of then without scrolling through 100's of pages to find them.
What I have below is a consolidated picture OP of the skins that I have and future skins to make choosing which skin you want easier. So far I have tried dbrand and Slick Wraps skins for my Nexus 6 and I will write my thoughts of both companies down below as well. I am a bit of an accessories hoarder when it comes to my phones so I'm happy to share more about each one with the forum. I will be buying more skins and updating my OP when I get them with plenty of pictures, don't be afraid to ask for more pictures because I have a plethora of them.
dbrand: dbrand.comdbrand.com
I have been ordering from dbrand for a while now, and I enjoy their skins. They have a nice amount of customization when it comes to phones especially the Nexus line. dbrand offers accents, back skins as well as front skins and you can order them in any arrangement that you choose. Their skins are made with 3M vinyl which means the material is the best quality they can use for skins. The color choices that dbrand offers are fairly standard, but not near as large as some other companies out there. The company ships from Canada which means you can expect the delivery time in the US to be 1-2 weeks. I've had orders take much longer than that (30+ days) but that is not normal and it is caused by USPS's slow movement. The cut of dbrand's skins is very precise leaving you with a virtually edge to edge fit. If you install the skin correctly you will have a fantastic looking device that is sure to attract many looks. I have people ask me if my phone was custom made and how did you get that back etc... with many of the skins that I have used including SW.
SlickWraps (SW): slickwraps.com
Initially I had some issues with SW not sending out shipping emails when I first purchased my Nexus skins. SW rep on the forum (usually Weston, but there are others who use the account) was nice enough to fix everything for me. I then ran into an issue with USPS delivering my package to the wrong address (the correct one was on there) but thats not SW's fault. They shipping my order out swiftly, and it arrived in about 5 days which is great compared to dbrand. SW also uses 3M vinyl which as mentioned above is the best material for skins. They also have custom colors made by 3M for them and a couple of other companies. Their color selection is superior to any other company so far, and they offer the Motorola "M" cutout on their Nexus 6 skins. Some people may like this while others may not (I personally like it). SW makes back skins, frame skins, and front skins which can give you a nice 360 degree coverage on your phone. SW also has a "goof" policy which states that SW will replace your skin if you "goof" up the install. This is great for those of us that aren't the best at installing skins or are new to it and make a mistake. Their skins fit is identical to dbrand in my experience so you don't have to worry about which one fits better. It's a matter of preference and what color/style of skin you want to buy.
I recommend both companies skins based on my experiences, and I hope this guide helps you decide what is better for you.
Coming soon:
Purple Carbon (SW)
Alligator White Leather (SW)
Edit: Pictures fixed!
Click to expand...
Click to collapse
Thanks for these!!! I'm curious, do you switch your skins often? Do they remove fairly easily and put back on the backing for later use? Or is it a one and done type thing. I'm looking at buying a few of these and have never used either company before. Thanks again!
Green Only "X" cutout (SW)
Purple (SW)
Orange no cutouts (SW)
Silver (SW)
Natural Series
There are a variety of "skins" in the natural series ranging from real cork to Horween Leather. I have the Bamboo posted below and soon I will have the leather ones. The bamboo is exactly that, bamboo. It is smooth as you would expect but you can still feel the grain which gives it a nice subtle texture. There is not real "grip" with the real bamboo, but lets be honest we buy the bamboo for how it looks. The bamboo is thicker than the standard skin so be careful when you buy it because not all cases may work. It does work with the Spigen Ultra Hybrid but it makes the screen virtually flush with the case. The bamboo is about as thick as a tempered glass screen protector and its flexible enough to curve with the phone. The adhesive works really well on the phone and is much stronger than the standard ones. To sum it up you won't be disappointed with the bamboo!
Real Horween Leather:
The Horween leather "skins" if you call them that are excellent quality. They look feel and even smell as good as you would expect leather to. SlickWraps uses the same leather as the Moto X 2014 so you know that its quality leather. I currently have the Dark Brown (football will be here Friday 2/13) and I could not be happier. The leather can be installed instead of the factory back which allows it to sit flush with the frame to give you that "factory fresh" OEM look. These are the best hands down "skin" you can buy at the moment. The leather will give you a huge amount of grip compared to the stock OEM back plate not to mention the nice look it provides. The leather itself is thicker than a standard skin as you would expect and comes in close to the bamboo's thickness. Using a case over the leather will be hard without using it as a replacement back. I also had a piece custom cut to fit the back of my Spigen Ultra Hybrid case so that I can have more grip than the slippery clear PC back it has. Overall you cannot go wrong with Horween leather and if you want a unique phone use it as a back replacement its a simple process. There is a guide here on XDA by another member showing the process (I did it and it took ~15 minutes from start to finish)
Dark Brown Horween Leather:
(I "aged" my leather on my phone so it looked more broken in because leather looks better when it gets used )
Camera Accent and Motorola "M" are from dbrand
Bamboo:
[URL=http://s39.photobucket.com/user/Tmpilz/media/Bamboo%20Nexus%206/IMG_20150130_162431437_HDR%202.jpg.html]
woah I don't even like green color that much but daaang! this green looks awesome on the phone!
thanks for the pics !
th3xeroeagle said:
woah I don't even like green color that much but daaang! this green looks awesome on the phone!
thanks for the pics !
Click to expand...
Click to collapse
Its brighter than I imagined, but it looks awesome with the blue supcase and blue camera accent. Its going to be my DD for a while.
I've has issues with slicks wraps and won't ever purchase from them again. I made a comment on a dbrand Facebook post about the crap slick starts on XDA. Slickwrapa went on my Facebook and found my company and wrote in to all the officers of my company stating I was harassing them. They even went as far to screen shot my facebook comments and demand my work change our internet policy. I'm an honest buyer and give honest reviews. But I can not believe the amount of effort they went through to track me down and treaten my place of work for something I posted on Facebook on the weekend.
1SiK1500 said:
I've has issues with slicks wraps and won't ever purchase from them again. I made a comment on a dbrand Facebook post about the crap slick starts on XDA. Slickwrapa went on my Facebook and found my company and wrote in to all the officers of my company stating I was harassing them. They even went as far to screen shot my facebook comments and demand my work change our internet policy. I'm an honest buyer and give honest reviews. But I can not believe the amount of effort they went through to track me down and treaten my place of work for something I posted on Facebook on the weekend.
Click to expand...
Click to collapse
That is rather unfortunate I never use my social media accounts for anything other than connecting with friends and family. I also don't have my real name on there for privacy reasons I keep it minimal and my friends know this. I'm sorry to hear about that, I believe I read about your experience on the 'posts to page' section on FB. I would not tolerate someone harassing me because what you do outside of work is your business not your companies. It's not my business to comment on these thing, but I hope that you can get this sorted out.
Now that I'm sufficiently of topic I wanted to say that I'm going to get some more dbrand skins as well. I was thinking about matte white and maybe another color series one. Does anyone have recommendations or want to see any in particular?
I'm rather found of the titanium skin on the blue nexus. I'll post some pictures soon.
1SiK1500 said:
I'm rather found of the titanium skin on the blue nexus. I'll post some pictures soon.
Click to expand...
Click to collapse
That was my favorite skin but I only had it on my phone for a short time because of a RMA. My Nexus is now the cloud white color so that's why I have both colors pictured above. The leather looks nice too on the CW Nexus. I'll see how the purple one turns out when it arrives.
Edit: I'll update you guys when I get a shipping notice from SW for my purple CF and white leather skins.
SW skins seek be here by Friday. Look for pictures then, I will update the OP.
Pilz said:
SW skins seek be here by Friday. Look for pictures then, I will update the OP.
Click to expand...
Click to collapse
Pilz.
Superb work chap. I actually spend days scouring both the DB and SW thread for pictures. Living in the U.K things get slightly inconvenient when importing products over from the states.
Just before you started this thread I ended up placing an order for a couple of skins from SW mainly because I liked the way Weston conducts himself on here.
Seeing your old MB on a titanium looks lovely. This will be the first I install. How did you find it in terms of fingerprinting?
Also how would you say these types of skins would fair against repeatedly placing and removing from a leather pouch?
Regards
S
ShahV said:
Pilz.
Superb work chap. I actually spend days scouring both the DB and SW thread for pictures. Living in the U.K things get slightly inconvenient when importing products over from the states.
Just before you started this thread I ended up placing an order for a couple of skins from SW mainly because I liked the way Weston conducts himself on here.
Seeing your old MB on a titanium looks lovely. This will be the first I install. How did you find it in terms of fingerprinting?
Also how would you say these types of skins would fair against repeatedly placing and removing from a leather pouch?
Regards
S
Click to expand...
Click to collapse
Thank you for the kind words!
The MB and titanium skin was my favorite set up until I got the cloud white Nexus.
The only one that attracted fingerprints was the matte black, all of the other ones were great at no shoeing finger prints.
I think all of the skins would be fine in s leather pouch with the exception of the 'leather' skin. My only concern with the leather style skin is the amount of grip it had compared to the other skins. It has a softer feel to it which over time could wear from going into and out if a pouch. I've never had any skin start to peel on me and I had the same skin on one of my G3's for 4-5months.
I use a case on my phone and I also have a pouch (not a leather one) and even with the constant changing of cases I haven't had any issues. If you have any other questions please feel free to ask away. I just started my spring semester so I will do my best to respond in a timely manner, but engineering work gets very time consuming.
This is really making me want a leather one. I may have to pull the trigger on it
Sent from my Nexus 6 using Tapatalk
iomthd said:
This is really making me want a leather one. I may have to pull the trigger on it
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
If you aren't sure my white one is coming by Friday (alligator texture) and I could post more pictures of my brown leather one. It has a nice feel and the most grip out of all the textures. I think the wood skins are a close second, but I don't have on currently. I might get the mahogany or teak in the future.
I am open to suggestions for skins if anyone wants to see one in particular I will consider it for my next order.
Great points. Here are my thoughts on the 2 brands as I've had both for the Nexus 6. I did note that the Nexus logo on the dbrand is a little wider than the one on the slickwraps. Other from that, I prefer the M logo versus the filled or exposed circle. I feel like the exposed circle breaks the lines, but the filled one leaves a big empty gap that looks a little off. On the other hand, I like the M logo, but the edge of the middle of the M is sharp and has me worried that it may eventually peel. time should tell.
dbrand
Pros:
- Great customer service! My initial order went missing over 15 days. I emailed them about it, and they immediately sent out replacement ones.
- More customization options on the site in regards to the Nexus logo and the circle.
- Website allows you to see what it will look like with the color phone you have and not covering the sides
Cons:
- Shipping to me is terrible. the replacement order that they sent me? I'm still waiting on it. And it's been close to a month. I actually ordered more of them because of the great customer service. So I have 2 seperate orders that were shipped on 12/12 that I have yet to receive.
slickwraps
Pros:
- Colors! Tons of selection of colors and styles. I'm in CF heaven right now
- More coverage. If you want to cover the sides, you have the option. slickwraps seems to do a good job of offering coverage of the sides and corners. I noticed this on the iPhone 6 as well, where the wrap goes completely around the corners
- Shipping is fast and free. I chose the slowest/free method, and I received mine in about a week. (I was away at CES, so I don't know exactly when it arrived.) Compared to paying $3 for shipping, it taking a month now....
Cons:
- Website experience isn't as good. Not sure if it's my computer or not, but using Chrome, I can't hit the devices button. So I can never get to the nexus 6 page without googling it. Works fine in IE. Also, when I select Back Only, I wish it would show the back only. This would give me a better idea of what it will like.
Overall, I started out using dbrand since they had great customer service, and they were the first to have N6 wraps available. However, I may still with slickwraps for now since they have the M logo cutout (which I prefer,) and shipping to me is a lot quicker and free. Both have excellent products and I don't think you can go wrong with either one.
The purple CF and white leather (alligator texture) arrived today. Pictures will be up soon
Pilz said:
The purple CF and white leather (alligator texture) arrived today. Pictures will be up soon
Click to expand...
Click to collapse
USPS is on the ball yet again.
You ordered this Monday?
Free Shipping to USA is pretty badass.
Weston
Slickwraps.com
slickwraps said:
USPS is on the ball yet again.
You ordered this Monday?
Free Shipping to USA is pretty badass.
Weston
Slickwraps.com
Click to expand...
Click to collapse
Yes I believe so, and USPS actually put my mail in the right mailbox this time!
I updated the OP with new pictures. I will take better ones when its daylight tomorrow if I get some free time.
I have Orange CF and another Green CF coming from SW with some changes check back for pictures and updates.
Got an N6 on the way, looking for a flip case that can easily be removed. I'd like to be able to clip the phone into the case when I'm out and about, but remove it when I'm at home or at the office. Anyone have a case like this? I've done some looking but it seems like most of them are TPU cases attached to the flip cover. For my other phone I found one that clipped around the edges in only a couple of spots. I'm hoping to find something similar or at least one that can stand up to the abuse of many in/out cycles.
Might give this one a shot. It's a bit bigger than some other cases but it feels pretty nice. I will warn you though, while not a huge issue, the edges on the flip cover started to look a little frayed after a few weeks. Probably just wear and tear though.
http://www.case-mate.com/collection...cases/products/black-nexus-6-stand-folio-case
Naked Sam said:
Might give this one a shot. It's a bit bigger than some other cases but it feels pretty nice. I will warn you though, while not a huge issue, the edges on the flip cover started to look a little frayed after a few weeks. Probably just wear and tear though.
http://www.case-mate.com/collection...cases/products/black-nexus-6-stand-folio-case
Click to expand...
Click to collapse
Do you experience any of the button issues that the amazon reviewers had?
http://www.amazon.com/Case-Mate-Google-Nexus-Stand-Folio/dp/B00PIOTZ04
Not particularly, no. I will say they are not the best though. Theres a little bit of play to them. If you can get it cheaper than the 30-some odd dollars they charge, I'd go for it. Personally I usually carry my nexus 6 w/o a case just due to how nice it feels, although if you find a thinner, rubberized flip case let me know.
All in all, I'd give the casemate a shot. Does the job just fine.
I know you might have your reasons for wanting a flip case, but because I wanted to do the same as you (protection when out and about but naked when at home) I went with a really nice larger pouch case instead.
https://www.amazon.com/gp/aw/d/B015HD74YO/ref=ya_aw_oh_bia_dp?ie=UTF8&psc=1
Sent from my Nexus 6 using Tapatalk
Thanks for the help guys. I considered the case-mate, especially since it was originally sold on Google play so it's close to "official"/oem but the multitude of bad reviews scared me off. I like the pouch idea too but I like to have some protection when I'm using the phone on the go since that's the most likely time I'd drop it. I only remove the case when I'm home or at the office since I'll be at the table/couch/desk there's less risk of dropping it and I prefer using the phone naked as much as possible.
I ended up finding one of these in eBay for 25 and it seems to work well, although it isn't as easy to remove as the flip case for my last phone. I haven't used the card slots yet as I'm a little concerned they could scratch the screen and I don't want to use a screen protector.
http://www.amazon.com/Genuine-Motor..._1_2?s=wireless&ie=UTF8&qid=1448630683&sr=1-2
Sent from my Nexus 6 using XDA Free mobile app
bchaney16 said:
Thanks for the help guys. I considered the case-mate, especially since it was originally sold on Google play so it's close to "official"/oem but the multitude of bad reviews scared me off. I like the pouch idea too but I like to have some protection when I'm using the phone on the go since that's the most likely time I'd drop it. I only remove the case when I'm home or at the office since I'll be at the table/couch/desk there's less risk of dropping it and I prefer using the phone naked as much as possible.
I ended up finding one of these in eBay for 25 and it seems to work well, although it isn't as easy to remove as the flip case for my last phone. I haven't used the card slots yet as I'm a little concerned they could scratch the screen and I don't want to use a screen protector.
http://www.amazon.com/Genuine-Motor..._1_2?s=wireless&ie=UTF8&qid=1448630683&sr=1-2
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
I've been using this inexpensive but very form-fitting case since I bought the n6. Easy to slip it out of the case, and I've used nillkin book-type cases for multiple phones. They usually last the life the phone (for me, that's about 2 years)
http://www.amazon.com/gp/aw/d/B00RJ..._SL500_SR100,100_&refRID=0G25GYGXGH6EY90F8YAQ
bchaney16 said:
Thanks for the help guys. I considered the case-mate, especially since it was originally sold on Google play so it's close to "official"/oem but the multitude of bad reviews scared me off. I like the pouch idea too but I like to have some protection when I'm using the phone on the go since that's the most likely time I'd drop it. I only remove the case when I'm home or at the office since I'll be at the table/couch/desk there's less risk of dropping it and I prefer using the phone naked as much as possible.
I ended up finding one of these in eBay for 25 and it seems to work well, although it isn't as easy to remove as the flip case for my last phone. I haven't used the card slots yet as I'm a little concerned they could scratch the screen and I don't want to use a screen protector.
http://www.amazon.com/Genuine-Motor..._1_2?s=wireless&ie=UTF8&qid=1448630683&sr=1-2
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
This is the one I use, and definitely have enjoyed it. I haven't had any problem with cards scratching the screen yet.
If you're still looking for a wallet themed case, you can try out this one by VENA, I have had it for 2 months and it's been great.
http://www.amazon.com/Google-Nexus-...8&qid=1449112949&sr=1-4&keywords=vena+nexus+6
I like my phones naked or as close as it comes (ultra thin transparent tpu case), but I also like to have something to put it in when out and about. My Nexus 5 was kept in a Mofi Kangaroo pouch case which was great. Unfortunately, they seemed to have stopped making them and only ever made them just about big enough for the N5. There are similar alternatives but none seem as good as the Mofi.
So, finding a removable pouch type case big enough for this beast is a challenge! I ordered a hand made fabric one from etsy which is well made, but at the size of the device, looks more like a small sleeping bag than the home of a sleek Nexus device .
So I took a bit of a gamble and ordered something not designed for the Nexus 6. Its primary advertising is for the Iphone 6+, but also states is suitable for Note 4. Looking at both devices dimensions, I concluded it was almost big enough. The Nexus being little longer, thicker and wider than both devices, but not much.
It seems to have paid off. Its a very nice luxurious pouch wallet case in genuine brown leather from what I gather is a brand owned by tuffluv. You can't tell from the site, but the phone pouch part on the side, top and bottom is elasticated so happily accommodates the Nexus's superior girth!
I can even squeeze it in with tpu case - just, but its a bit tough to pull out. Might have to seek an ultra thin tpu case - any recommendations? Without the TPU, its next to perfect! Fully loaded with cards in the card slots makes it slightly tighter to close fully, but still very acceptable in my book.
Currently its in the sale on Tuffluv site where its claimed to be a £50 case (and going by the other similar cases going for in excess of £50, I believe them!). With the sale price and discount it came to £17.99 delivered.
Just thought I'd share in case anyone else was looking for something similar but hadn't found anything labelled as suitable for the Nexus 6.
Can't paste a link but go to tuff-luv dot coms site and search for "Alston Craig Vintage Genuine Leather Wallet Case Cover Pouch for Apple iPhone 6 Plus / 6s Plus / Samsung Galaxy Note 4 - Brown"
Alston Craig have their own site, but there is a discount code for a couple of quid off on tuff-luv
Hope this helps someone.
Oh, ps, there is a small slip of paper in the packaging that states you should have a screen protector fitted to protect the screen before use. Its material lined; not the soft microfibre type, but not something I would be concerned about.
pps. Only issue I've found is the elastic straps are centred, so covers headphone and usb port. Shame, not a deal breaker for me.