Hello everyone
I purchased LG Optimus LTE2, F160L. I was trying to install ROM but as it rebooted it stuck on screen saying "LG Security Error"?
How can I fix this error?
any help!
Thanks
100% Solved
veer.developer said:
Hello everyone
I purchased LG Optimus LTE2, F160L. I was trying to install ROM but as it rebooted it stuck on screen saying "LG Security Error"?
How can I fix this error?
any help!
Thanks
Click to expand...
Click to collapse
download attached file, there you can find two links for
1. Download KDZ
2. Download Attached ZIP file
1) Download the latest KDZ for your phone
check link in attached file
2) Make sure you have LG United Drivers already installed, otherwise download from below
*LGUnitedMobileDriver file in attached zip
3) Download LG KDZ Updater
KDZ_FW_UPD_EN folder in zip
4) Download the manual adb wipe batch file
wipe in attached zip
5) Put your Optimus into Download Mode by switching it off, attaching the usb cable to the phone, holding both the up and down volume buttons at the same time and lastly inserting the usb cable into the computer; wait for the drivers to finish loading if doing it for the first time.
6) run KDZ_FW_UPD.exe. Use the settings below
Type: 3GQCT
Phone Mode: CS_Emergency
KDZ file: navigate to the folder which you have saved the downloaded KDZ from the step (1)
Click Launch Software Update and wait for the flash process to finish
7) Your phone will restart itself when IParam = 90 is displayed and proceed slower until you see IParam=1 again (which signals the end of flash, you can safely exit the program then and remove the cable from the phone). If phone boots up normally, congrats, skip the steps below and proceed to use the phone as per normal.
However, this most probably will not be the case for newer Optimus-es, as the data partition somehow wasn't wiped even when KDZ-ed, remaining 'dirty', thus causing bootloop or security infringement.
8) If the phone is stuck at the booting up LG/Telco logo, you will need to manually wipe the data partition.
9) Force the phone off by holding the power button for appx 15secs.
10) Put the phone into recovery mode by holding the volume up and home button concurrently, then press the power button. Let go of all the buttons after you see the LG logo on screen for the 2nd time and the screen goes blank thereafter (backlight may still be on). The phone will kind of reboot and then enters recovery mode. Repeat the process if you did not get it the first time.
11) With the phone in Recovery Mode, connect it to the computer, wait for the drivers to load (if doing it for the first time), unzip the wipe batch file downloaded earlier from step (4), double click on wipe.bat to execute the wipe command.
12) Your phone will auto reboot when wiped and (hopefully) boot as per normal.
Hope with this simple guide fellow members will feel safer when rooting or removing non essential LG wares from their Optimus.
and tell me if you got any good rom for lg lte2?
and tell me if you got any good rom for lg lte2?[/QUOTE]
Sling 1.5.3 on lgviet.com
more stable and reliable rom
http://lgviet.com/forum/threads/lte2-sling-v1-5-3-v1-6-nhieu-chuc-nang-la-cho-lte2.1325/
mine stuck at u+ lte logo any suggestion i tried kdz v20g and v20f but no luck and also tried the wipe option
I can't enable Download Mode on F160L
I did the following
Switched it off
Connected the USB cable to phone
Hold down Volume UP and Volume DOWN at the same time
Inserted the other side of the USB cable to PC with without releasing the Volume buttons
It just showed me blue battery, indicating that the phone is now charging.
Which part I did wrong?
right way
inspir3 said:
I can't enable Download Mode on F160L
I did the following
Switched it off
Connected the USB cable to phone
Hold down Volume UP and Volume DOWN at the same time
Inserted the other side of the USB cable to PC with without releasing the Volume buttons
It just showed me blue battery, indicating that the phone is now charging.
Which part I did wrong?
Click to expand...
Click to collapse
you did it wrong Hold down Volume UP and Volume DOWN at the same time first and then connect the cable until it goes into download mode.
androidlabs said:
you did it wrong Hold down Volume UP and Volume DOWN at the same time first and then connect the cable until it goes into download mode.
Click to expand...
Click to collapse
that's exactly what I did. I held down Volume UP and Volume DOWN at the same time and then connected yhr cable, but then it shows as charging, not download mode
inspir3 said:
that's exactly what I did. I held down Volume UP and Volume DOWN at the same time and then connected yhr cable, but then it shows as charging, not download mode
Click to expand...
Click to collapse
My phone is also not going into recovery or download mode anymore
Murshad007 said:
My phone is also not going into recovery or download mode anymore
Click to expand...
Click to collapse
what did you do beforehand?
inspir3 said:
what did you do beforehand?
Click to expand...
Click to collapse
My phone is asking for some code in Korean.. I tried to flash through KDZ but it gave some Lparam and Sparam error..
Now I can't go in Recovery or download Mode either... I have tried all key combinations... One by one several times...
My phone only show this after boot..
Sent from My LG Optimus G F180L Sling 2.2.2 stock 4.4.2 rooted
Bundle of thanks
@luvlymani
Thanks man for this awesome thread. I flashed an android 4.3.1 rom on my LG LTE 2 and it turned out to be sh*t... made me worry a lot. It didn't allow me to connect to wifi neither did it detect my sd card. It didn't let me boot into recovery either... I was so damn frustrated.. I wasted continuous hours looking for a solution as Korean phones have little support and I finally found this thread. I have to say this is the BEST DAMN POST regarding the LTE 2 recovery from bad ROMS I have ever seen. You can measure my appreciation from the amount of words that I've typed.
Anyway, once again thanks a lot for sharing this BEAUTIFUL thread. Cheers and stay blessed !! :good: :good:
I tried to update the LG F160L with V20g_00.ZIP
The phone is at download mode and run KDZ_FW_UPD.exe
I got the error window popup :
Upgrade Error
Wparam:100
Lparam:5000
Please see the update.log below:
[R&D Test Tools Log File]
09:08:21 : Launching SW update
09:08:21 : Unpacking KDZ
09:08:26 : KDZ file extraced
09:08:36 : Files were extracted.
09:08:36 : LGMobileDL Load.
09:08:36 : Port = -1
09:08:36 : Connecting to phone
09:08:51 : Check Phone mode = 2
09:08:51 : Phone type check.......
09:08:52 : LGMobileDL.DLL Loading....
09:08:52 : _SetAuthMark Fail
09:08:53 : _SetAuthMark Ok : wAuthMark(65535)
09:08:53 : _DetachDLL Call
09:08:53 : _DetachDLL Call End
09:08:53 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\LGF160LAT-00-V20g-LGU-KR-NOV-26-2013+0_Develop.wdb
09:08:53 : Param : moduleDir =
09:08:53 : Param : waitTime = 0
09:08:53 : Param : UsbHighSpeed = 1
09:08:53 : Param : PhoneMode = 2
09:08:53 : Param : BinVersion = V20g_00 (1)
09:08:53 : Param : AuthMark = 65535
09:08:53 : Call fn_StartUpgrade
09:08:56 : 3GQCT : wParam = 13, lParam = 4
09:08:56 : Step Complete : DSP Write
09:08:59 : 3GQCT : wParam = 13, lParam = 5
09:08:59 : Step Complete : DSP Write
09:09:08 : 3GQCT : wParam = 13, lParam = 6
09:09:08 : Step Complete : DSP Write
09:09:15 : 3GQCT : wParam = 13, lParam = 7
09:09:15 : Step Complete : DSP Write
09:09:16 : 3GQCT : wParam = 2007, lParam = 0
09:09:16 : 3GQCT : wParam = 13, lParam = 8
09:09:16 : Step Complete : DSP Write
09:09:16 : 3GQCT : wParam = 2008, lParam = 5
09:09:17 : 3GQCT : wParam = 13, lParam = 10
09:09:17 : Step Complete : DSP Write
09:09:18 : 3GQCT : wParam = 20, lParam = 0
09:09:18 : 3GQCT : wParam = 100, lParam = 5000
09:09:18 : Step : Upgrade Error error code = 5000
09:09:18 : ResetStartInfo() Call
09:09:18 : _DetachDLL Call
09:09:18 : _DetachDLL Call End
09:09:18 : FreeLibrary Call
09:09:18 : FreeLibrary Call End
09:09:18 : ResetStartInfo() Call End
09:09:19 : ===FINISHED===
luvlymani said:
download attached file, there you can find two links for
1. Download KDZ
2. Download Attached ZIP file
1) Download the latest KDZ for your phone
check link in attached file
2) Make sure you have LG United Drivers already installed, otherwise download from below
*LGUnitedMobileDriver file in attached zip
3) Download LG KDZ Updater
KDZ_FW_UPD_EN folder in zip
4) Download the manual adb wipe batch file
wipe in attached zip
5) Put your Optimus into Download Mode by switching it off, attaching the usb cable to the phone, holding both the up and down volume buttons at the same time and lastly inserting the usb cable into the computer; wait for the drivers to finish loading if doing it for the first time.
6) run KDZ_FW_UPD.exe. Use the settings below
Type: 3GQCT
Phone Mode: CS_Emergency
KDZ file: navigate to the folder which you have saved the downloaded KDZ from the step (1)
Click Launch Software Update and wait for the flash process to finish
7) Your phone will restart itself when IParam = 90 is displayed and proceed slower until you see IParam=1 again (which signals the end of flash, you can safely exit the program then and remove the cable from the phone). If phone boots up normally, congrats, skip the steps below and proceed to use the phone as per normal.
However, this most probably will not be the case for newer Optimus-es, as the data partition somehow wasn't wiped even when KDZ-ed, remaining 'dirty', thus causing bootloop or security infringement.
8) If the phone is stuck at the booting up LG/Telco logo, you will need to manually wipe the data partition.
9) Force the phone off by holding the power button for appx 15secs.
10) Put the phone into recovery mode by holding the volume up and home button concurrently, then press the power button. Let go of all the buttons after you see the LG logo on screen for the 2nd time and the screen goes blank thereafter (backlight may still be on). The phone will kind of reboot and then enters recovery mode. Repeat the process if you did not get it the first time.
11) With the phone in Recovery Mode, connect it to the computer, wait for the drivers to load (if doing it for the first time), unzip the wipe batch file downloaded earlier from step (4), double click on wipe.bat to execute the wipe command.
12) Your phone will auto reboot when wiped and (hopefully) boot as per normal.
Hope with this simple guide fellow members will feel safer when rooting or removing non essential LG wares from their Optimus.
and tell me if you got any good rom for lg lte2?
Click to expand...
Click to collapse
i have same security error in my LG Optimus F160LV. i can read your post but cannot open your given files. it is downloading 515 bytes and there is two links but it is not opening. can you please write me every file name separately so i can download it from anywhere? pls help my set is off since 2 days!!!!
deshwani said:
i have same security error in my LG Optimus F160LV. i can read your post but cannot open your given files. it is downloading 515 bytes and there is two links but it is not opening. can you please write me every file name separately so i can download it from anywhere? pls help my set is off since 2 days!!!!
Click to expand...
Click to collapse
Actually Brother, i replied to this thread because i was unable to find a cure for such problem. Back then i dont have ability to post links, thats why i share 2 html files to open up links.... here you go
luvlymani said:
Actually Brother, i replied to this thread because i was unable to find a cure for such problem. Back then i dont have ability to post links, thats why i share 2 html files to open up links.... here you go
Click to expand...
Click to collapse
your 1 link which you sent me inbox is not opening, i think its kdz file. but i found its original kdz firmware file from some websites but its very heavy and about 1gb... its taking too too much time to download and i dont have reliable internet connection to download them... i think its taking some more time than others file which i easily download 500/600 mb's.... can you please help me some resources? which is easy for me... i am still stuck up with my phone!!!
luvlymani said:
Actually Brother, i replied to this thread because i was unable to find a cure for such problem. Back then i dont have ability to post links, thats why i share 2 html files to open up links.... here you go
Click to expand...
Click to collapse
finally i have installed kdz file and followed your process and my phone is unbricked... many many thanks for this helpful guide...
Lg l160l sms corian app keboard fix rom needed.
I search since three months but not fined any rom.
Plz xda developers made this rom with out any bug
Thanks
help me !!!
deshwani said:
finally i have installed kdz file and followed your process and my phone is unbricked... many many thanks for this helpful guide...
Click to expand...
Click to collapse
help me out please, I got this problem and I can not manage the place I read on this forum but I still give error. if anyone can help me remain grateful to them :good:
hELP!!!!!
My kdz updater jut gets unresponding at unpacking kdz......help plzzzz obile stuck at lg logo
Hi everybody. I have a F160LV model and I'm stuck on "LG Security Error". My problem is taht I can't go on download mode. I've tried all button combination described above (vol. up + down + plug USB / remove battery, vol up+down+ plug USB + put battery...) but every time, the phone's just booting and stuck again on "LG Security Error".
I can only boot to "LG Service mode".
I tried command via adb (adb reboot download, adb reboot-bootloader) but same thing, phone booting and stuck on "LG Security Error".
I tried adb reboot recovery, it just do hard reset but don't solve the problem.
So does anyone can give me more ideas? What should I do? Is there another way to boot in download mode? Or is it possible to flash via adb?
Thank's for your help guys.
Related
While trying to flash my o1 with 2.2 rom with kdz i got this msg.
17:28:13 : Launching SW update
17:28:13 : Unpacking KDZ
17:29:02 : KDZ file extraced
17:30:43 : Files were extracted.
17:30:43 : LGMobileDL Load.
17:30:43 : Port = 3
17:30:43 : Connecting to phone
17:30:48 : PHONE WAS NOT FOUND!
17:30:50 : ===FINISHED===
What could be the reason? please sum1 help. i removed the sd card before flashing.
Could it be the problem?
Sorry the phone flashed after i turned usb debugging on. After flashing it showed Emergency mode for 5 minutes but did not reboot as it is supposed to. So i removed the battery and then switched on the phone but to my surprise nothing happened. it was the same 2.2.1.
What to do now?
I am desperate to root but a little anxious. Please Help
USB 1.1 is nt install i blv
sorry but couldn't understand what you wrote. pease elaborate
Boot your phone into emergency mode, connect the usb cable, then flash the rom. Remember to disable LG modem as listed here to prevent bricking.
How to boot in emergency mode
Return+power +volume up
Sent from my LG-P500 using XDA App
Ok, basically I wanted to downgrade to froyo in order to reflash mikos rom to have data and gsm, i downgraded with KDZ, all went great, but when i tried to boot it just blocked at boot animation i mean it took forever (Well i waited ~10 minutes twice or 3 times) and I said, hm okay i will try to use kdz again maybe it will work, when i tried to use again KDZ to update the rom (still the same rom tho) i got an error and when i reboot the phone it goes directly to emergency mode. If i try to use KDZ updater it says that the phone is not found, if i try to use lg software update agent (i think thats the name of the software) it also can't found the phone.
I installed many lg drivers from many sources but when i installed lg drivers from lg update agent thingy it bugged my pc internet connection(is working now) and now im writting from fedora (linux). If i try here to use trough wine KDZ still no luck, maybe i will try with my 2nd PC with windows xp to do it but i donno if it will work i guess not. (tried earlier, don't ask )
So is there any way that i can bring my phone back to life?
Thanks in advance
later edit: yes i disabled modem driver, also tried with it on, still no luck
later later edit: LG software update see my phone but at "analysis" it says "please disconnect he cable from your cell phone in order and remove and connect the batter. power on your cellphone and press the restart button to resume update" i did that and after i press "the resume button" it loads and say that again...
The error from KDZ:
[R&D Test Tools Log File]
19:50:07 : Launching SW update
19:50:07 : Unpacking KDZ
19:50:33 : KDZ file extraced
19:50:38 : Files were extracted.
19:50:38 : LGMobileDL Load.
19:50:38 : Port = -1
19:50:38 : Connecting to phone
19:50:38 : PHONE WAS NOT FOUND!
19:50:40 : ===FINISHED===
I do it somehow and now KDZ could see my phone OOOOOOOOO
I put on it V10E_00.kdz but i'm again stuck in bootloop wtf am i supposed to do?
davincionu said:
I do it somehow and now KDZ could see my phone OOOOOOOOO
I put on it V10E_00.kdz but i'm again stuck in bootloop wtf am i supposed to do?
Click to expand...
Click to collapse
Remove your battery, push it back in.
Do a hardware reset -> home + volup + power.
Then try KDZing again.
Remember, after KDZing do a hardware reset again after the process is done.
Sometimes reinstalling the USB drivers does the trick.
Also, some users reported that on 'shaking' [yeah it sounds weird but its true] your phone, it gets recognised by the PC.
ive installed 6 5 8, from 2.3.3 and i got a problem with signal so i used this post http://forum.xda-developers.com/showthread.php?p=13396506#post13396506 to go back to 2.2 and i got an error... no my phone is stuck at Emergency Mode !!! and KZD says No phone found... so i go to an service?
booting in recovery isnt working...
FIX:
Ok I copied this from xda forum by: Zecanills.
You need to download the firmware of your device. Please check here the The_ERROR thread wich explains it very well:
[ROMS] Original LG Firmware list - xda-developers
Download KDZ updater and uncompress it
KDZ_FW_UPD_EN.zip - 4shared.com - online file sharing and storage - download
Install msxml.msi from the uncompressed directory
Conect your device (do not turn on disk storage) and run KDZ_FW_UPD.exe (Has administrator).
Select Type : 3GQCT
Select PhoneMode : DIAG
In KDZ file : Choose the ROM file you downloaded in the first step
Press Launch software update and wait (It will be 10 minutes or so). In your phone it will appear "Emergency mode". Wait until it reboots.
And you're done!
sorry for this... i managed to fix my problem
I used the rom cyanogen_thunderg-ota-eng.mik-6.5.5 and flash Clock World Mode 5.0.... through ROM Manager application some hours ago.
After that I rebooted P500 into Recovery by Quick Boot application but the phone stuck at the LG logo only.
I tried the combo Volume Down + Home + Power but it still stuck at LG logo.
Then I decided to flash the original rom V10B by DKZ firmware update through my laptop but it always show Phone not found with log as follow:
20:21:50 : Launching SW update
20:21:50 : Unpacking KDZ
20:22:07 : KDZ file extraced
20:22:16 : Files were extracted.
20:22:16 : LGMobileDL Load.
20:22:16 : Port = 0
20:22:16 : Connecting to phone
20:22:21 : PHONE WAS NOT FOUND!
20:22:23 : ===FINISHED===
Checking device manager still show LGE Android USB Serial Port (COM4)
This usb cable and laptop was used to flash the V10B rom for this phone last year without any problem.
I do not know what is wrong and how to fix.
Please help!!! - Solved
Updated: Solved by using LGMDP Thunderbird to flash LGV/20 rom without any problem - still not know what is wrong with DKZ firmware updater.
Help, i stuck at LG logo and can't bootup ,i try everything,holding power buton home buton volume down ,up etc. with only usb cabel without battery and still nothing,today i take my lg o. one at my lg service,and im waiting on answer., I had 2.2.2 froyo and after tutorial from cyanogen mod site with topic:LG Optimus-One Complete Flashing Guide" i succesefly insttaled CyanogenMod 7.2.0-RC1-p500,so today i wanted to try CM 9 or is4 beta4 from this thread:[UNOFFICIAL][DEV/GEEKS-ONLY] Cyanogenmod 9 (Android 4.0.3)[BETA4][KANG TEST BUILD]
" , and just as i started , i enter in rom manager ,enter in clockworkmode and when asked,i hit lg optimus one option instead lg optimus one oldbb , so clockwork installed and in rom manager i enter in recovery., and than start this big , nervous problem of mine, my phone is stuck at lg logo and can't bootup when i pressed power buton ., is the problem in that DJOptimus-One mention in his tutorial,i quote "5) Press the “Flash Clockworkmod Recovery” option
6) Popup appears, asking for your device; select “LGE Optimus One”
7) Another popup will appear giving two options for the basebands:
- LG Optimus One (This is for new baseband)
- LG Optimus One (Old BB) (This is for old baseband)
I would advise you to select Old BB recovery as its more stable; new baseband may result in semi-brick (Personal Experience) " )
??!
Flash a stock firmware using KDZ while in Emergency Mode (Back+VolUp+Power).
There are a few tutorials on the O1 section on how to do this.
I believe this happened because you installed a recovery for the new BB when you had the old BB. If you want CM9, flash a stock 2.3.3, that will also install the new baseband on your phone.
In addition to the above, once you get it resolved, don't forget to use Rom Manager to create a back up of your existing ROM, so that you can flash it back in cases like the one you're currently in. I've been thankful a few times that I had a back up to fall back on.
Kraix said:
Flash a stock firmware using KDZ while in Emergency Mode (Back+VolUp+Power).
There are a few tutorials on the O1 section on how to do this.
I believe this happened because you installed a recovery for the new BB when you had the old BB. If you want CM9, flash a stock 2.3.3, that will also install the new baseband on your phone.
Click to expand...
Click to collapse
When i tried using KDZ to install the stock firmware, it says it cannot find my phone. Im doing it in emergency mode. Do you know what is going on? I keep getting this:
11:41:57 : Launching SW update
11:41:57 : Unpacking KDZ
11:41:59 : KDZ file extraced
11:42:00 : Files were extracted.
11:42:00 : LGMobileDL Load.
11:42:00 : Port = -2
11:42:00 : Connecting to phone
11:42:00 : PHONE WAS NOT FOUND!
11:42:02 : ===FINISHED===
Do you have the LG drivers installed in windows?
Sent from my LG-P500 using XDA
Hironel said:
When i tried using KDZ to install the stock firmware, it says it cannot find my phone. Im doing it in emergency mode. Do you know what is going on? I keep getting this:
11:41:57 : Launching SW update
11:41:57 : Unpacking KDZ
11:41:59 : KDZ file extraced
11:42:00 : Files were extracted.
11:42:00 : LGMobileDL Load.
11:42:00 : Port = -2
11:42:00 : Connecting to phone
11:42:00 : PHONE WAS NOT FOUND!
11:42:02 : ===FINISHED===
Click to expand...
Click to collapse
In kdz select emergency instead of diag
And boot into emergency
Power+vol up+back
It should work
Sent from my LG-P500 using XDA