Hello all !
So Just received the long awaiting tempered glass screen protector. Bought it from here : http://www.ebay.com/itm/131021234626 CHEAP AND FAST CHIPPING !
So here is some pictures
It does add a little Bump to the homescreen, but nothing major
Overall im very pleased with this glass protector, its awesome. Really easy to apply and it feels more fingerprint ressistive then before. One thing is sure, it kicks every expensive protective film ass! Go and buy it and feel the difference for shure
S-PEn, finger hovering EVERYTHING works fine. Go and buy it asap !
Thank you mate. I just ordered it. Hope I will be satisfied as you
You wont be dissapointed , s-pen works really good with this
I really looks like it is on upside down, there is a bevel rounded edge facing the phone. Could be the pictures, and I can't imagine the adhesive side was mistakable.
Im not blind, its on correct side
I just got this and I have a slight issue (top right corner+bottom left corner) is slightly lifted. This isn't huge, or a deal breaker by any means. This is my first glass screen protector and its absolutely beautiful.
Dont like the look of the cut for top part of the phone, should checked this thread out before ordering!
Explosion proof
did your glass-m come with a home button sticker?
just fitted mine and it feels great
are there any glass protectors that cover the whole screen even at the top? (with proper cut outs)
Got mine today, all installed. Do like the Glass feel alot instead of plastic screen protectors.
There is no home button included in my package. I now looking to get another one with better top cutouts
Better Coverage Up Top:
Spigen
http://www.spigen.com/galaxy-note-3-glas-tr-slim-premium-tempered-glass.html
iloome
http://www.iloome.com/Galaxy-Note-3-Screen-Protector/b/7535169011?ie=UTF8&title=Galaxy+Note+3
Nillkin
http://www.nillkin.com/english/proshow.asp?mid=2&sid=0&tid=0&cid=1&scid=13&id=3636&page=1
Orzly (not verfied where cutouts are)
http://www.ebay.co.uk/itm/ORZLY-PRE...ting_LaptopAccessories_RL&hash=item20d9f0dcd4
Ordered the orzly and will review it later
Cheers
It looks exactly like the Mine USA Ghost Glass I just got... and it's $20 Cheaper! There has to be a difference. There better be a difference. I'm going to order one to find out.
if the orzly is exactly how it is in the description...this coukd be my ideal screen protector....one that covers whole screen and just has cut outs for speaker and hoke button...with holes for ffc and the two front sensors...cant wait forna review! might even order it if i get too impatient.
rawready said:
if the orzly is exactly how it is in the description...this coukd be my ideal screen protector....one that covers whole screen and just has cut outs for speaker and hoke button...with holes for ffc and the two front sensors...cant wait forna review! might even order it if i get too impatient.
Click to expand...
Click to collapse
Let me know when you get it.
Sent from my SM-N900T using XDA Premium 4 mobile app
rawready said:
if the orzly is exactly how it is in the description...this coukd be my ideal screen protector....one that covers whole screen and just has cut outs for speaker and hoke button...with holes for ffc and the two front sensors...cant wait forna review! might even order it if i get too impatient.
Click to expand...
Click to collapse
I saw a comment in another thread (can't find it now) that mentioned that really thin piece above the speaker getting broken, maybe in a drop.
If I find it again I'll edit with a link.
Sent from my Nexus 10 using xda app-developers app
ORZLY changed their top cut its now like GlassM / MIME
Version 1 was like the pic but customers had problems.
I have ordered NIKKIN.
Sent from my SM-N9005 using Tapatalk
Related
https://www.zagg.com/invisibleshiel...es-screen-protectors-covers-skins-shields.php
I'm wait first review..
Thanx its ordered
thanks, i ordered too!!!
Count me in as well...
Bought one last night
I purchased a few screen protectors off eBay.... and NONE of them actually cover the entire surface of the screen.
This looks pretty amazing!
But I must say that it feels a bit strange to spray the fluid on the back of the protector and then squeeze it out, can't this fluid get into the earphone, speaker and around the buttons below the screen?
this doesn't look bad, but i think i'll stay with my Brando screen protector, which imo is cool enough, and will get a rubber-ish backplate as soon as one with a correct price will appear.
I have been searching for a skin like this for my Diamond2. I have read that this Zagg skins all have a orange coat on top that makes a very undesirable effect. Any one can confirm this?
And what about phantom skynz? They provide full body protection, but the model for the D2 its not available yet ...
A little money saving tip for anyone else buying from zagg - enter ZAGG20 in the coupon code box to receive a 20% discount.
Hope that saves someone some money
root beer said:
A little money saving tip for anyone else buying from zagg - enter ZAGG20 in the coupon code box to receive a 20% discount.
Hope that saves someone some money
Click to expand...
Click to collapse
Just ordered.
Thank you bro!
Just installed the InvisibleSHIELD...
I just installed the invisibleShield I ordered from Zagg a few days ago. Installation was a little tricky, but using the solution made it easy(ish). I used a lot more spray than they recommended, but took the battery/sim/SD card out first. I left it drying for 12 hours, and everything switched on fine.
My advice to anyone getting this is to watch some installation vids on YouTube.
I bought it for the screen protector really as I am very clumsy with other WM phones in the past.
The main issue I have, which is a major one, is that the kit for the Diamond 2 is actually 7 pieces which you install piece by piece. Some of these pieces (like the brushed metal pieces on the edge) are very thin and warp easily. I thought when I purchased this that the screen piece would be one part, where the edges would 'fold' around the sides. This is NOT the case. As a result, the actual edges are not covered at all. These pieces don't meet to form a solid shield, but leave gaps between the edges. I have included some pictured to highlight this.
The actual effect on the screen is ok. The screen is bubble-less, but there is a slight sheen on the front. When the screen is on, its not noticable. Also, the shield is a little 'tacky' - not a lot, but it does help feel more snug in your hand. However, for the same reason, the touch screen (when using a stylus) it doesn't feel as smooth as without.
My overall opinion is that if you are looking for something to stop scratching the screen then its great, but if you are looking for something to make your phone indestructible, look elsewhere.
So you bought the protection that coveres the entire phone?
I'm planning to buy the cover for the display only, was the display cover hard to get in place?
agento
7 pieces....so you have 1 piece for backplate,2 in front and 4 for the sides?
Is that correct?
Thanks for sharing the info. Does the IS make it difficult to get the backplate off?
Does it make the front, back or sides feel or look noticeable different?
Laban said:
So you bought the protection that coveres the entire phone?
I'm planning to buy the cover for the display only, was the display cover hard to get in place?
Click to expand...
Click to collapse
The front was the easiest thing to apply!
MOYSATOS said:
agento
7 pieces....so you have 1 piece for backplate,2 in front and 4 for the sides?
Is that correct?
Click to expand...
Click to collapse
There is the front piece, the back piece, 2 thin strips for the sides and 2 small rectangles for the bottom side near the stylus. So 6, not 7. I can't count!
Jiffycom said:
Thanks for sharing the info. Does the IS make it difficult to get the backplate off?
Click to expand...
Click to collapse
No, the IS covers the back plate, but it doesn't wrap over the sides. The back slides off just as easy as ever.
toady2k1 said:
Does it make the front, back or sides feel or look noticeable different?
Click to expand...
Click to collapse
The front just looks like a normal screen protector. The back looks glossier. The touch though, as stated earlier, is slightly tackier. The only thing is the gaps where the IS doesn't meet.
Not trying to bum you out, but... the pictures you posted show a pretty messy device. Doesn't have a "clean" look anymore, is this because of the ZAGG?
Bought it from e-bay UK for £9.95 + £1.95 shipping. Arrived promptly.
Nicely packaged, with the same premium quality feeling than the almost three times
more expensive Spigen equivalent product I ordered for a Note 1 some time ago.
Very easy to install with the included dust remover film, alcohol swab & cleaning cloth, as well as very easy to follow instructions
Fits perfectly on the Note 3. Just one minor annoyance : it contained iPhone round colored button covers...
lbmh said:
Bought it from e-bay UK for £9.95 + £1.95 shipping. Arrived promptly.
Nicely packaged, with the same premium quality feeling than the almost three times
more expensive Spigen equivalent product I ordered for a Note 1 some time ago.
Fits perfectly on the Note 3. Just one minor annoyance : it contained iPhone round colored button covers...
Click to expand...
Click to collapse
this is disappointing to me because on the items description it made me believe the whole front was covered with only holes for ffc and sensors...appreciate the review now im still on the hunt...almost bought one today too.
what i looking for: tempered glass screen protector that covers the whole front of the phone with cut outs for speaker, and button. and holes for ffc and both front sensors.
rawready said:
this is disappointing to me because on the items description it made me believe the whole front was covered with only holes for ffc and sensors...appreciate the review now im still on the hunt...almost bought one today too.
what i looking for: tempered glass screen protector that covers the whole front of the phone with cut outs for speaker, and button. and holes for ffc and both front sensors.
Click to expand...
Click to collapse
Rawready, actually I wonder whether such a large cutoff at the top of the phone is not
a good design tradeoff : on my previous Note 1 the upper part of the Spigen glass protection
got broken within a few weeks of use.
lbmh said:
Rawready, actually I wonder whether such a large cutoff at the top of the phone is not
a good design tradeoff : on my previous Note 1 the upper part of the Spigen glass protection
got broken within a few weeks of use.
Click to expand...
Click to collapse
well with such a big cut out isnt it prone to getting stuff stuck into it? lent? getting caught on something,,,other things scratching that area thats exposed?
also i dont quite understand what your saying about the one you had on your note?
rawready said:
well with such a big cut out isnt it prone to getting stuff stuck into it? lent? getting caught on something,,,other things scratching that area thats exposed?
also i dont quite understand what your saying about the one you had on your note?
Click to expand...
Click to collapse
Rawready,
Maybe some lint or dust might get caught, still the cut out looks OK to me.
About the old one, the first time I dropped it, the thin glass band on top of the speaker cut out broke.
lbmh said:
Rawready,
Maybe some lint or dust might get caught, still the cut out looks OK to me.
About the old one, the first time I dropped it, the thin glass band on top of the speaker cut out broke.
Click to expand...
Click to collapse
i see what your saying...the glass was thin between the speaker and sensor holes so it seemed for fragile in your experience...
rawready said:
i see what your saying...the glass was thin between the speaker and sensor holes so it seemed for fragile in your experience...
Click to expand...
Click to collapse
Not so much between the speaker and sensor holes but rather on top of the speaker hole.
Hey
Does this screen protector reduce fingerprint marks? And do you still think it's good after a week of use?
Thank you
hello, I know if the screen protector is very noticeable and thickens the phone, and also I want to know how the tactile sensation of touch
needhelp11 said:
Hey
Does this screen protector reduce fingerprint marks? And do you still think it's good after a week of use?
Thank you
Click to expand...
Click to collapse
It does reduce the fingerprint mark. 3 weeks after, I'm very happy with it.
sipoputu said:
hello, I know if the screen protector is very noticeable and thickens the phone, and also I want to know how the tactile sensation of touch
Click to expand...
Click to collapse
The screen protector does thicken the phone slightly and is a bit noticeable, though the added protection trade off seems good to me.
The tactile sensation is excelent.
lbmh said:
The screen protector does thicken the phone slightly and is a bit noticeable, though the added protection trade off seems good to me.
The tactile sensation is excelent.
Click to expand...
Click to collapse
Hey,
Thank you for answering. Just a little question, do you use the S view cover ? Because I just want to know if this screen protector is compatible ( ie you can close the S view cover) with the case.
needhelp11 said:
Hey,
Thank you for answering. Just a little question, do you use the S view cover ? Because I just want to know if this screen protector is compatible ( ie you can close the S view cover) with the case.
Click to expand...
Click to collapse
I do not use cover, so I can(t answer this one, but I did try a bump cover and it did fit.
ok thank you anyway
Hey guys,
I'm looking for a screen protector that is relatively cheap, ($10 each at most, frequently recommended ones like Spigen are over 30 bucks!), made of glass and slim.
No need for it to be bulletproof or anything, I'm careful with my phones and I just want it to not scratch with regular usage, not be a fingerprint magnet and not interfere with touch or s-pen sensitivity.
Anything you guys have personally used (preferably for some time already) and can recommend?
Heres the one Im using, its from AmzDeal been using about a week dropped my phone several times over the weekend out hiking and not a scratch on it its tough ill give it that. Its 10 bucks shipped with amazon prime and i got it in 2 days. Its a knock off but been very good. When I got it it came in the AmzDeal box and packaging, but when I went to apply the protector it said Incipio which doesnt even make one like that for the N3 LoL. So its cheap, a knock off but feels great, stylus glides across it and as I said after numerous drops is showing to be very strong. It also is a full cover around the phone except around the top speaker, and prox sensor area but goes around the entire screen and comes with a home button cover to help make it stick up more. I took out my original screen protector on my ZeroLemon case and this fits great inside. Hope this helps link is below:
AmzDeal Screen Protector
Hey i really like zagg shields get one for bout 15 bucks
dp_alvarez said:
Hey guys,
I'm looking for a screen protector that is relatively cheap, ($10 each at most, frequently recommended ones like Spigen are over 30 bucks!), made of glass and slim.
No need for it to be bulletproof or anything, I'm careful with my phones and I just want it to not scratch with regular usage, not be a fingerprint magnet and not interfere with touch or s-pen sensitivity.
Anything you guys have personally used (preferably for some time already) and can recommend?
Click to expand...
Click to collapse
I haven't put a screen protector on my last couple phones because I felt like they attracted grime/oil/fingerprints too much - what's the point of keeping your screen in pristine unblemished condition if you can't see it clearly because the cover is covered in fingerprints! The glass is so tough now that they really aren't necessary unless you tend to be a little abusive to your phones.
That said, I recently put on a couple different TechArmor protectors and the matte finish one is great. It is the "anti-glare / anti-fingerprint" version. I also tried the "ultra clear" version and that one is horrible! You touch it once and suddenly it looks like that beautiful sharp screen is covered in vaseline or something. Absolute fingerprint magnet, I couldn't stand it for 5 minutes. The AG/AF one is fantastic though. I really like the matte finish and how it sort of subdues the brightness of the screen without losing crispness or clarity. And you will never see a fingerprint again. I also LOVE how the stylus feels on it. It always felt a little awkward to write with on the bare screen, but on the matte protector it really feels like using a high quality ball point pen on paper. I'm sure the matte finish will be an instant turn off for some people, but I really like it and it's functional too. The "anti-glare" properties are marginal at best, but the anti-fingerprint properties are excellent. $7 for a three pack on Amazon and a little kit for applying it cleanly with no dust specks. Be careful to choose the AG/AF option and NOT the clear option (it's kind of a hidden as a "color option" so make sure you pick the one you want before you add to cart)
Nillkin glass protector - slim, smooth and has curved sides
No need to deal with inferior PET protectors
amebiasis said:
Heres the one Im using, its from AmzDeal been using about a week dropped my phone several times over the weekend out hiking and not a scratch on it its tough ill give it that. Its 10 bucks shipped with amazon prime and i got it in 2 days. Its a knock off but been very good. When I got it it came in the AmzDeal box and packaging, but when I went to apply the protector it said Incipio which doesnt even make one like that for the N3 LoL. So its cheap, a knock off but feels great, stylus glides across it and as I said after numerous drops is showing to be very strong. It also is a full cover around the phone except around the top speaker, and prox sensor area but goes around the entire screen and comes with a home button cover to help make it stick up more. I took out my original screen protector on my ZeroLemon case and this fits great inside. Hope this helps link is below:
AmzDeal Screen Protector
Click to expand...
Click to collapse
You said it was only cut out around the speaker and proximity sensor, but the photo of the ptoduct you linked to has the wide cut out, exposing the camera as well. Is the picture accurate or is your description?
I hate the extra wide cut out, I think that contributed to cracking my original screen protector.
Sent from my SM-N900T using XDA Free mobile app
gnik luap said:
You said it was only cut out around the speaker and proximity sensor, but the photo of the ptoduct you linked to has the wide cut out, exposing the camera as well. Is the picture accurate or is your description?
I hate the extra wide cut out, I think that contributed to cracking my original screen protector.
Sent from my SM-N900T using XDA Free mobile app
Click to expand...
Click to collapse
Ya sorry about that I've got it in a case and didn't realize it went over that far, the picture is correct it goes from your LED to your camera. I will say though I spoke with the seller and he apologized said the distributor put the wrong incipio sticker on the device packaging and is sending me a new protector just because. So I will say the seller was really good to work with.
Just got it in the mail today. Install went smooth very simple to install. Glass it's thin but works great with my tpu case.
Came with alcohol pad
Fiber cloth
Hard card for bubbles
And glass
Feels like I have nothing on my phone, and so far I don't have any trouble with the screen recognizing my touch. And no problems with my tpu case with it on! Recommended it to anybody who can get their hands on it!
Sent from my LG-D850 using XDA Premium 4 mobile app
Pics as promise!
I got the same one, I can hardly tell there is a screen protector on the phone at all.
Sent from my Gunmetal Lg G3
It really is. It's like I'm running the phone naked. The only time I'm reminded of it is when I go caseless.
Really? I have this and am not impressed at all. Yes it feels nice. Yes it installed very easily with no bubbles. What bothers me is the fit and without radii edges. It's very visible white edges. It's not even close to the edge of the glass and it doesn't cover the camera, LED, and light sensors. Replacements are on the way...
Yes maybe you got a bad batch. But I don't have any problems with rough edges. Mine doesn't fit all the way to edge but very very close but I like that it's like this because of my tpu case I didn't want it to rub up against it to lift it allowing dust in between the protector.
Which could be how they made it in the first place who knows!
Also yes the camera led and speaker aren't covered but it's so close to it that I don't see this area being scratched unless you are running without a case.
903tex said:
Yes maybe you got a bad batch. But I don't have any problems with rough edges. Mine doesn't fit all the way to edge but very very close but I like that it's like this because of my tpu case I didn't want it to rub up against it to lift it allowing dust in between the protector.
Which could be how they made it in the first place who knows!
Also yes the camera led and speaker aren't covered but it's so close to it that I don't see this area being scratched unless you are running without a case.
Click to expand...
Click to collapse
+1
Sent from my Gunmetal Lg G3
903tex said:
Yes maybe you got a bad batch. But I don't have any problems with rough edges. Mine doesn't fit all the way to edge but very very close but I like that it's like this because of my tpu case I didn't want it to rub up against it to lift it allowing dust in between the protector.
Which could be how they made it in the first place who knows!
Also yes the camera led and speaker aren't covered but it's so close to it that I don't see this area being scratched unless you are running without a case.
Click to expand...
Click to collapse
Yep, probably the very reason it doesn't fit the screen well.
I'm running a Spigen Slim Armor case, The cases bezel around the screen just covers the plastic edge of the phone, not the glass, which I like very much. I'm not a fan when a case covers glass because it can interfere with trying to select certain things on the screen. So it is more apparent when a screen protector doesn't quite go to the edge of the glass. The white edges and die cut around the camera, LED, and sensors make it that much worse too, unfortunately.
See mine was cut longer on the sides and the bottom so the only gap I have is the top part where they intentionally left uncovered.
Looks to me that there different batches with some weird cuts. You said you getting a replacement from them? Or did you mean you are ordering from a different company?
fgcchevy said:
I got the same one, I can hardly tell there is a screen protector on the phone at all.
Sent from my Gunmetal Lg G3
Click to expand...
Click to collapse
Same here and it is great value from Amazon UK
Sent from my LG-D855 using XDA Premium 4 mobile app
Well it didn't last long at all! Still recommended it because of how it protect my screen. But I was washing my car guess I bump into something when I was cleaning the ride and this happen.......
Well I have been struggling to find a decent screen protector untill now.
Online there were alot of terrible reviews on most protectors due to the protectors not sticking. They lift after a few days, reduce the touch sensitivity. The good ones have a sort of dot matrix you can see when the screen is tilted certain ways. So I thought I'd order the genuine Samsung ones I thought hey who better than the manufacture.
I wasn't holding up much hope but I was pleasantly surprised. It isn't a glass protector and it isn't quite the film protectors. It's a little thicker the clarity is crystal clear and the feel is nice. It works with certain cases but not huge bulky ones. I tend to use a case for work and I have a skin on the rear of the phone to stop scratches and a screen protector on the front. Touch wood I haven't broken a phone yet. I want it looking nice and shiny after a year so not to bothered hiding it with a skin.
I will update this review in 7 days after using it in my day to day life. The protector has adhesive all over and is easy to fit as the outer protector has two alignment tabs to hold and a white line the matches perfectly to the bottom and top edges of where the screen starts so you can align perfectly.
I purchased mine in the UK for £14.99 you get 2 in the packaging which is pretty substanical so they shouldn't loss there shape when posting either.
Feel free to ask any questions
Happy reading and happy purchasing.
If you have this protector please write how your experience with it has been so far.
Just ordered these too as I found a very faint scratch on my screen.
Let me know how you get on mate.
Where are you finding samsung branded protectors? They aren't listed on the samsung website.
seawolf823 said:
Where are you finding samsung branded protectors? They aren't listed on the samsung website.
Click to expand...
Click to collapse
http://www.mobilefun.co.uk/official-samsung-galaxy-s8-plus-screen-protector-twin-pack-p63092.htm
This is where I purchased mine
orignall products..
Where we find orignal roduct of my cell phone everyone give me first copy
MopHeadGeek said:
http://www.mobilefun.co.uk/official-samsung-galaxy-s8-plus-screen-protector-twin-pack-p63092.htm
This is where I purchased mine
Click to expand...
Click to collapse
Please keep us posted on this thanks.
5 days later so far so good the screen protector also works with a tech 21 clear impact case! It hasn't lifted as of yet. Tiny bit of dust being collected by the very edges ever so slight other than that it's perfect.
I'm also wondering how it's doing. Does the protector cover right up to the edge where it meets with the medal? How's it feel...like olephobic coating and feeling smooth...not rubbery.
It is holding up perfect for my usage one issue which I caused I nicked the bottom of the protector which has caused it to tear ever so slightly my fault for taking it out of a case. It feels perfect for me you can tell it isn't the glass but it isn't a bad feel.
The dust collecting on the edges is seriously getting on my nerves. The ocd in me wants to rip the protector off and the other part of me can't stand the small faint marks I have on the screen.
Thank you thumbs up
MopHeadGeek said:
Well I have been struggling to find a decent screen protector untill now....
.
Click to expand...
Click to collapse
Hey man thanks, can I suggest that you edit first post so it's easier to track your review.
Also screen protector seemed to be an issue and seems like you found the solution so I'd make it sticky ?
Thanks again ordering
I bought the neo flex from spigen, im waiting for my tough armour case to arrive before i test it. I will keep a weekly report as well if you want so we can have all the information about screen protectors in one same spot
Jnioms said:
I bought the neo flex from spigen, im waiting for my tough armour case to arrive before i test it. I will keep a weekly report as well if you want so we can have all the information about screen protectors in one same spot
Click to expand...
Click to collapse
Make sure u trim the corners a little first before applying or it'll lift at some point on the corners I'd ur not perfectly straight with ur application. I took about 1-2mm off mine by following the contours of the corners. It's perfect now.
Despite Spigen advertising to apply it with the case on and that its "case friendly"... Its not perfect. By trimming it slightly before application you'll avoid it lifting.
Sent from my SM-G955F using Tapatalk
KennyLegend said:
Make sure u trim the corners a little first before applying or it'll lift at some point on the corners I'd ur not perfectly straight with ur application. I took about 1-2mm off mine by following the contours of the corners. It's perfect now.
Despite Spigen advertising to apply it with the case on and that its "case friendly"... Its not perfect. By trimming it slightly before application you'll avoid it lifting.
Sent from my SM-G955F using Tapatalk
Click to expand...
Click to collapse
Thank you very much for the information! I will sure do
Off-topic: Im still waiting for my case to finally test the flex, tracking information says it's already in the country. Argentina's Custom is the worst thing ever...
This is PET or TPU? Anyone know?
Sent from my SM-G950F using Tapatalk
Screen Protector for Samsung S8
I saw a Screen Protector that is quite highly recommended. InvisShield Extreme Screen Protector for Samsung S8. It can be found here http://www.sgfreshidea.com/mobile-phone-beauty-news-singapore/samsung-s8-plus-invisshield-extreme-screen-protector-singapore.html
the official one was the best s***t that I bought in years... doens´t stick very well in the borders collecting all the lint...
sousa_2005 said:
the official one was the best s***t that I bought in years... doens´t stick very well in the borders collecting all the lint...
Click to expand...
Click to collapse
Agree I had mine since day one and it's perfect with every single case. And I test a few glass screen protectors without luck. As much as I like glass this oficial screen protector seems like a protector made by spigen because of his quality.
Anyone uses a bumper/case compatible with this screen protection ?