hi guys i flashed my samsung galaxy s2 jellybam-v10.3.0 rom.
now i wanna return to my stuck rom jelly bean with odin but odin cannot connecting with my phone i allowed usb debugging and that stuf i dont know what i do plz give me the way how connect with odin before i used odin as well but know with jellybam cannot connect
The thread here will help you solve all your Odin issues. Be patient and read before trying again. Here you go http://forum.xda-developers.com/showthread.php?t=2240096
kevinsystem1 said:
hi guys i flashed my samsung galaxy s2 jellybam-v10.3.0 rom.
now i wanna return to my stuck rom jelly bean with odin but odin cannot connecting with my phone i allowed usb debugging and that stuf i dont know what i do plz give me the way how connect with odin before i used odin as well but know with jellybam cannot connect
Click to expand...
Click to collapse
Are you sure you have the drivers installed so you can use odin? I would just flash another jellybean rom and that should resolve your problems. I use neatrom which for me is alot better than stock! link provided below
http://forum.xda-developers.com/showthread.php?t=1569686
heres how to do it
install samsung usb drivers just.google it
download odin
take.the battery out.of ur device and put it back in dont turn it on
press the home and vol down button and keep them pressed dont release them now press the power button (I.e all the three.buttons are pressed simultaneously)
when a screen.shows up release the buttons press vol up to continue as instructed phone is in download mode now
now connect phone to pc drivers will install open odin in the first.box a com port will show up indicating ur phone is connected if it isnt connected take out batery and enter download mode again
download stock firmware file from
samsumg-updates.com and extract it u will get a .tar file
then.select the .tar file in the pda box of odin and start the process
Sent from my GT-I9100 using xda premium
Related
How to unbrick Samsung Galaxy Ace
If your phone doesn’t boot into download mode and you have a black screen after flashing froyo heres how you unbrick it, it worked for me .
Step 1 – Prepare odin with the firmware u want to flash (in my case was gingerbread 2.3.3) and get it ready to go;
Step 2 – Remove battery and connect your galaxy ace to the computer;
Step 3 -- Insert battery holding Volume down + Power + Home
Step 4 – At this point Odin should have detected your SG Ace ( Yellow rectangle should appear);
Step 5 – Click Start button in Odin and wait about 5 min.
If all goes well it should come back to life.
Get the roms from sammobile site.
Be sure that you download de correct firmware for your device version.
Good mannnnnn ֱ
SuperMini said:
How to unbrick Samsung Galaxy Ace
If your phone doesn’t boot into download mode and you have a black screen heres how you unbrick it, it worked for me .
Step 1 – Prepare odin with the firmware u want to flash (in my case was gingerbread 2.3.3) and get it ready to go;
Step 2 – Remove battery, SIM and SD card, next connect your galaxy ace to the computer;
Step 3 – Hold Volume down + Power + Home button at the same time;
Step 4 – Insert the battery and wait a bit;
Step 5 – At this point Odin should have detected your SG Ace ( Yellow rectangle should appear);
Step 6 – Click Start button in Odin and wait about 5 min.
If all goes well it shoul come back to life.
Click to expand...
Click to collapse
Don't work for me...
you saved my day
I was about to send my phone to support centre!
Cool, brought back to life.
I wish we had a thread listing all these tricks.
my phone brick after flashing CWM from ROM manager and I've wrong choose phone type and then go to the phone shutdown (try to go to recovery mode). and the phone won't be turn on. I try this thread but did not work, my phone is won't show the download screen but it was detected by ODIN v4.38 and the yellow bar shown. But it was stuck on
<1> setup connection..
I try 3 file tar and 1 file Tar (one package) firmware just the same stuck on it.
please somebody help for the solution....
Thanks,
isnwinyetra said:
my phone brick after flashing CWM from ROM manager and I've wrong choose phone type and then go to the phone shutdown (try to go to recovery mode). and the phone won't be turn on. I try this thread but did not work, my phone is won't show the download screen but it was detected by ODIN v4.38 and the yellow bar shown. But it was stuck on
<1> setup connection..
I try 3 file tar and 1 file Tar (one package) firmware just the same stuck on it.
please somebody help for the solution....
Thanks,
Click to expand...
Click to collapse
There is no solution for that. Did you try making usb test jig?
Sent from my GT-S5830 using Tapatalk
isnwinyetra said:
my phone brick after flashing CWM from ROM manager and I've wrong choose phone type and then go to the phone shutdown (try to go to recovery mode). and the phone won't be turn on. I try this thread but did not work, my phone is won't show the download screen but it was detected by ODIN v4.38 and the yellow bar shown. But it was stuck on
<1> setup connection..
I try 3 file tar and 1 file Tar (one package) firmware just the same stuck on it.
please somebody help for the solution....
Thanks,
Click to expand...
Click to collapse
There is no solution, I know several cases where people destroyed their Ace this way.
Why do people even bother to pamper with their phones when they have no clue...
Not yet, ok i'll try using usb test jig, but there is any tutorial video to do this thread??
Sent from my GT-I9000 using XDA App
isnwinyetra said:
Not yet, ok i'll try using usb test jig, but there is any tutorial video to do this thread??
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Did it working???
Thanq... Thanq...
works fine for me.. great job.
what is the password on .rar files?
korbin3103 said:
what is the password on .rar files?
Click to expand...
Click to collapse
samfirmware.com
My download mode do not appear..
Odin recognize the phone but stops on "setup connection..."
can you help me please???
big thanks dude, this small help, really a big help
davebyone said:
My download mode do not appear..
Odin recognize the phone but stops on "setup connection..."
can you help me please???
Click to expand...
Click to collapse
How did that happen? Did you try to install Clockworkmod recovery?
davebyone said:
My download mode do not appear..
Odin recognize the phone but stops on "setup connection..."
can you help me please???
Click to expand...
Click to collapse
Same here!!! download screen does not appear.
Tried downgrading from KPH(Code rom) to Froyo IN
forall.sri said:
Same here!!! download screen does not appear.
Tried downgrading from KPH(Code rom) to Froyo IN
Click to expand...
Click to collapse
Firstly close the KIES. If closed and Still nothing, try to change the connected PC USB port. Hope it helps!
CHEERS!
Hello everyone I have the Galaxy ace brick and download mode but does not exit by pressing the volume up + power + home connects to the PC but remains in connection with odin you can 'do something or should I send him to assist with
or tried to do a backup with Rom manager and is' off my rom 2.3.4 root
I remain blocked setup connection
Tanks
did u try to remove battery ?
if not try remove and enter download mode again, this should help u .
yes remove the battery and put it as a guide, I will connect if I press the volume up
tomorrow the port to help center
Thank you
i Have a Samsung Vibrant Rooted with cm7 installed. But i went to flash to a new rom and now Clockworkmod gives me an error of cant mount sd card.Any ideas
u wil need to odin back to stock and when u do make sure u check re-partition if ur coming back from cm7! When ur back at stock and u still have the same problem let us know?
if u have problems getting into dl mode from there:
power off phone
pull out battery
turn on odin
attach phone to pc with usb cable
now while holding down both volume buttons put battery back in.
now you should be in download mode and go back to stock with odin from here!
make sure u put the proper .pit and .pda file in there proper places on odin and ur set to go.
Enjoy and also make sure u have the proper samsung drivers
OK i have Tried ODIN.... Is clockwork recovery the same as download mode? and if not what am i missing? :more details: I can mount the internal sd to the computer from clockwork but clockwork wont mount the sd to the phone. I downloaded Kies mini and installed drivers for the vibrant. I have odin and the tar and pit files. i have the android sdk also... any help is greatly needed. Thanks.
turn on odin and hook up ur phone to ur pc with usb cable and then go into download mode. U should see a yellow icon saying com if it is yellow then ur phone has been recognized. Then put the pitfile in pit and the tar file with pda and then click start. Give it like 5 to 10 min and then it will restart and u will be back at stock!
download mode is the android guy with a yellow triangle
to go into download mode:
power off phone
pull out battery
turn on odin
attach phone to pc with usb cable
now while holding down both volume buttons put battery back in.
now you should be in download mode and go back to stock with odin from here!
make sure u put the proper .pit and .pda file in there proper places on odin and ur set to go.
Enjoy and also make sure u have the proper samsung drivers
there is the problem i cant get the phone in to download mode...
it always opens up clockwork
soitis636 said:
it always opens up clockwork
Click to expand...
Click to collapse
im just retarded.... figured it out... thanks for the help tho. i will post in here later if i still cant mount the SDcard
After using odin i get to system recovery 2e. but the phone will not boot, it passes the sgs screen but then black screen, the buttons on the bottom still act responsive. I was on CM7 could this be the issue?
the same problem
i'm on CM7 19
Go back a few builds (CM7)...it is a known bug.
*hint--read the comments on the nightlies before flashing.
I usually work with iPhones so Android phones are a new field for me...
I have a friend who rooted his Samsung Galaxy Ace and then installed Android 2.3.4 but he decided to install something as he says that "doubles the ram memory of the device" well as soon as he installed this the phone immediatelly got bricked.
I have it here in my hands and I tried entering RECOVERY, DOWNLOAD mode and it was impossible.
So I tried pressing all the button (Vol+,Vol-, Home and Power) and the device was USB recognized by my PC,installed its own drivers but nothing showed up on the screen. Then I pressed Home and Power and USB sound ran again and from there on the phone does not react to any combination of buttons, taking out the battery or anything and the PC does not see it anymore.
I tried to be as specific as possible cause I really want to help this guy... So If anyone knows what are the possible solutions besides "take it to samsung care center" I'd really appreciate it!
Thansk!
Install KIES from Samsung so you have the drivers for the phone.
Install ODIN and run on your pc so you can flash a stock ROM (you don't need to have KIES running at the same time)
Take the battery out of the phone and connect it to the pc with ODIN running via USB.
If ODIN detects the phone put the battery back in and now you can flash with a stock rom and your phone will now work.
There are instructions on this forum where to find ODIN and how to load a ROM into it ready to flash.
have u tried the USB Jig?
http://tiny.cc/JIGACE
davebyone said:
have u tried the USB Jig?
http://tiny.cc/JIGACE
Click to expand...
Click to collapse
I'd save that for plan B, If it's showing up on a PC it's not bricked.
Bricked = no power, no response, no detect by pc no nothing.
cooltt said:
Install KIES from Samsung so you have the drivers for the phone.
Install ODIN and run on your pc so you can flash a stock ROM (you don't need to have KIES running at the same time)
Take the battery out of the phone and connect it to the pc with ODIN running via USB.
If ODIN detects the phone put the battery back in and now you can flash with a stock rom and your phone will now work.
There are instructions on this forum where to find ODIN and how to load a ROM into it ready to flash.
Click to expand...
Click to collapse
But Can I download any ODIN? Because I've seen through the forum that there are several ODINs for different Samsung Models... besides there are several ODIN versions! So which one do I need to download? Please a little help here cause in the Android field I'm still a noob!
Also as I told you, the first time the PC recognized the phone when I pressed ALL the buttons... but afterwards it does not recognize it anymore... does it have to do anything with that KIES you are just telling me about? Also which KIES should I download?
Thansk!
To me it doesnt wounds like its "Totally Bricked", take the battery out and leave if there for awhile, come back later on and see if you can enter download mode.
If you want you drivers to be installed correctly, download the KIES (2.1 i guess?) and get ODIN to reflash it.
we have a how to unbrick thread ....try d steps http://forum.xda-developers.com/showthread.php?t=1071970
QNBT said:
To me it doesnt wounds like its "Totally Bricked", take the battery out and leave if there for awhile, come back later on and see if you can enter download mode.
If you want you drivers to be installed correctly, download the KIES (2.1 i guess?) and get ODIN to reflash it.
Click to expand...
Click to collapse
rylegolas said:
we have a how to unbrick thread ....try d steps http://forum.xda-developers.com/showthread.php?t=1071970
Click to expand...
Click to collapse
Ok... this is as far as I have come.... The guide for unbricking seems good, there is only one problem. I've already Loaded ODIN with the firmware files and boot, and all those files. But I can NOT, I repeat I can NOT enter DOWNLOAD MODE (Vol-,Home, Power Buttons). I can only enter EMERGENCY DOWNLOAD MODE (Vol+,Vol-, Home and Power Buttons) and the good news is that ODIN is ABLE to recognize it, BUT as soon as I hit star it stays stuck at "<1> setup connection..." Well before you start saying to search forum for solutions, well I did, and I found this thread: http://forum.xda-developers.com/showthread.php?t=1188378
The guy had this same problem and he realized his problem was that he was entering EMERGENCY DOWNLOAD MODE rather than DOWNLOAD MODE. BUT I can NOT enter DOWNLOAD MODE the phone just doesn't enter this mode, only the EMERGENCY DOWNLOAD MODE so what can I do to make ODIN flash my phone!!????? Please help!!
pliundemix said:
Ok... this is as far as I have come.... The guide for unbricking seems good, there is only one problem. I've already Loaded ODIN with the firmware files and boot, and all those files. But I can NOT, I repeat I can NOT enter DOWNLOAD MODE (Vol-,Home, Power Buttons). I can only enter EMERGENCY DOWNLOAD MODE (Vol+,Vol-, Home and Power Buttons) and the good news is that ODIN is ABLE to recognize it, BUT as soon as I hit star it stays stuck at "<1> setup connection..." Well before you start saying to search forum for solutions, well I did, and I found this thread: http://forum.xda-developers.com/showthread.php?t=1188378
The guy had this same problem and he realized his problem was that he was entering EMERGENCY DOWNLOAD MODE rather than DOWNLOAD MODE. BUT I can NOT enter DOWNLOAD MODE the phone just doesn't enter this mode, only the EMERGENCY DOWNLOAD MODE so what can I do to make ODIN flash my phone!!????? Please help!!
Click to expand...
Click to collapse
USB Jig , and stop posting the same question twice
Sent from my GT-S5830 using XDA App
Ok So I finally did it. Bought the USB Jig! From here:
http://www.ebay.com/itm/Samsung-I910...90122901388427
And Guess What! IT DID NOT WORK!!!
This was my last resort and now I don't know what to do! But pay attention the funny thing, AS I mentioned earlier in ALL my posts! Is that the phone is recognized by ODIN but only in EMERGENCY DOWNLOAD MODE (It even says "COM PORT 18") But in this mode ODIN doesn't flash it, I needed DOWNLOAD MODE which was the reason why I bought the USB JIG, but it is not working! Is there a some kind of workaround to get the JIG working? PLEASE I REALLY REALLY need help!!!
Thanks!
pliundemix said:
Ok So I finally did it. Bought the USB Jig! From here:
http://www.ebay.com/itm/Samsung-I910...90122901388427
And Guess What! IT DID NOT WORK!!!
This was my last resort and now I don't know what to do! But pay attention the funny thing, AS I mentioned earlier in ALL my posts! Is that the phone is recognized by ODIN but only in EMERGENCY DOWNLOAD MODE (It even says "COM PORT 18") But in this mode ODIN doesn't flash it, I needed DOWNLOAD MODE which was the reason why I bought the USB JIG, but it is not working! Is there a some kind of workaround to get the JIG working? PLEASE I REALLY REALLY need help!!!
Thanks!
Click to expand...
Click to collapse
only thing you need is WARRANTY to go to service center....if you bricked by ROM Manager
and i can see you copy pasting problems from your thread to other threads ... why??
if someone can help you,they will.. don't spam with same posts
NO ONE REPORTED THAT USB JIG WORKS SUCCESSFULLY ON ACE as far as i see
Phone Appears in Odin Only when Booted, Not in Download Mode.. The phone is never rooted and is on ICS 4.0.1. stock !! Please help !!
anand_32138 said:
Phone Appears in Odin Only when Booted, Not in Download Mode.. The phone is never rooted and is on ICS 4.0.1. stock !! Please help !!
Click to expand...
Click to collapse
I think ur phone has 4.0.3 Not 4.0.1.... Did u Press Volume down + Power Button + Home button ?
Have you flashed the new ics bootloader?
Have you installed Kies? It comes with drivers needed to recognize the phone while in Download mode.
Sent from my Galaxy S2 GT i9100
Most likely a driver problem. Had this issue myself when I first got the phone, but a driver re-install fixed it for me.
And make sure Kies is not open.
Hey, S2 user, im helping my friend to solve his phone problem, my friend problem is he mot yet root then he flash custom rom. Now he get stuck on s2 logo. Now i try to entry Recovery mode, but it appear only the s2 logo (Vol. Up + Home button + Power ) ,then i try (Vol. Down +Home button + power) , but i goes in to ODIN mode, so who can help me about this?
Thankful if someone help
Superman
Superman said:
Hey, S2 user, im helping my friend to solve his phone problem, my friend problem is he mot yet root then he flash custom rom. Now he get stuck on s2 logo. Now i try to entry Recovery mode, but it appear only the s2 logo (Vol. Up + Home button + Power ) ,then i try (Vol. Down +Home button + power) , but i goes in to ODIN mode, so who can help me about this?
Thankful if someone help
Superman
Click to expand...
Click to collapse
Stop spamming the board =) Or else no one will help u :/
First check it's model number. GT-I9100G, GT-I9100, GT-I9100T, ..........etc
Download Stock Firmware from sammobile.com for your S2 model specific version...
Put your mobile in to Odin mode.
Download and Run Odin on PC.
Connect mobile to PC using USB cable.
Select PDA section on Odin. Select downloaded stock firmware.
Flash & leave rest to Odin!
Phone will be back to working mode. Next time root before flashing custom ROM!
Sent from my GT-I9100G using Tapatalk HD
gp545 said:
First check it's model number. GT-I9100G, GT-I9100, GT-I9100T, ..........etc
Download Stock Firmware from sammobile.com for your S2 model specific version...
Put your mobile in to Odin mode.
Download and Run Odin on PC.
Connect mobile to PC using USB cable.
Select PDA section on Odin. Select downloaded stock firmware.
Flash & leave rest to Odin!
Phone will be back to working mode. Next time root before flashing custom ROM!
Sent from my GT-I9100G using Tapatalk HD
Click to expand...
Click to collapse
Sorry, and my friend dont know how. And im not in Samsung section so i don know anything of Samsung but thanks. I try return into recovery mode but it doesnt work.
c|ffff00ffSuperman
Superman said:
Sorry, and my friend dont know how. And im not in Samsung section so i don know anything of Samsung but thanks. I try return into recovery mode but it doesnt work.
c|ffff00ffSuperman
Click to expand...
Click to collapse
When the phone turns on it'll write the model number. then search sammobile.com or checkfus for that model number's firmware. download and go into odin mode.
a simple google search would be enough, don't need to spam the entire board