hi .am using xperia u,and have installed kernel phantom.while installing firebean i had a problem.1ly the boot animation is visible and not able to enter into the menu.pls give me some suggetions to over come this problem..
tnks..
did you wipe cache and dvalik and data before flashing?
Sent from my AOSP 4.3 Xperia S via Tapatalk
Enter in to recovery, wipe cache/dalvik and reboot system, if it don't works then reflash the ROM.
If you are installing the ROM by flashing from CWM Recovery, wipe cache/dalvik before flashing.
If you are installing a custom ROM over another ROM might also cause this problem. so clear data also..
Ben36 said:
did you wipe cache and dvalik and data before flashing?
Sent from my AOSP 4.3 Xperia S via Tapatalk
Click to expand...
Click to collapse
ya i done
tharansakthi said:
Enter in to recovery, wipe cache/dalvik and reboot system, if it don't works then reflash the ROM.
If you are installing the ROM by flashing from CWM Recovery, wipe cache/dalvik before flashing.
If you are installing a custom ROM over another ROM might also cause this problem. so clear data also..
Click to expand...
Click to collapse
i have done everything....but sony logo is only visible.
tnks...
rajkumar93 said:
i have done everything....but sony logo is only visible.
tnks...
Click to expand...
Click to collapse
try flashing another custom kernel, and try to enter into recovery.. if you can enter clear cache, data, dalvik and try booting system.
If this doesn't works you might be doing something wrong. please re do the things which I told you in the previous post. It seems you are skipping some parts.
Flashing Stock FW for Xperia U must bring you out of this. Have you tried out finding the correct FirmWare for your device. I think the latest FW is based on jelly bean and build version is 6.2.A.x.xx....
tharansakthi said:
try flashing another custom kernel, and try to enter into recovery.. if you can enter clear cache, data, dalvik and try booting system.
If this doesn't works you might be doing something wrong. please re do the things which I told you in the previous post. It seems you are skipping some parts.
Flashing Stock FW for Xperia U must bring you out of this. Have you tried out finding the correct FirmWare for your device. I think the latest FW is based on jelly bean and build version is 6.2.A.x.xx....
Click to expand...
Click to collapse
hey thanks bro.... my mobile working perfectly ....thanks...
rajkumar93 said:
hey thanks bro.... my mobile working perfectly ....thanks...
Click to expand...
Click to collapse
good to hear that @rajkumar93, next time when you post the question give it proper title, that will help others to help you well...
Related
Dear XDAérs,
I recently rommed by SG2 with: Resurrection Remix ics v9.3 black edition XXLPH 4.0.3 FULL-Wipe. However my wifi aint working at all.. i do a wifi scan and enter password for my Wifi and then it says: saved but when i press on it and choose: connect it wont let me connect to it.. Any solutions on this problem? Thanks in advice.
Greetings,
Xanji
Post in the relevant thread: http://forum.xda-developers.com/showthread.php?t=1436854
did you follow the exact steps one page one?
Sent from my GT-I9100 using xda premium running We scrip 9.3 Black edition
drherdman said:
did you follow the exact steps one page one?
Sent from my GT-I9100 using xda premium running We scrip 9.3 Black edition
Click to expand...
Click to collapse
Yeah i did but somehow it doesnt let me use wifi propery..
eSche said:
Post in the relevant thread: http://forum.xda-developers.com/showthread.php?t=1436854
Click to expand...
Click to collapse
Woops sorry
Connect with your computer to the phone using "adb shell" and check with "dmesg" why it fails...
ill recommend a full wipe again and reflash the rom, i used to have a similar problem with both Resurrection and Wanamlite roms, usually after another wipe/clear dalvik it worked like a charm
RorixRebel said:
ill recommend a full wipe again and reflash the rom, i used to have a similar problem with both Resurrection and Wanamlite roms, usually after another wipe/clear dalvik it worked like a charm
Click to expand...
Click to collapse
Hmm i have a normal CMW kernal installed, i cannot find te wipe/clear dalvik on it..
xanji said:
Hmm i have a normal CMW kernal installed, i cannot find te wipe/clear dalvik on it..
Click to expand...
Click to collapse
go into CWM mode and theres an option
wipe data/factory reset
advanced -> wipe dalvik cache
reflash the rom if you are still inside CWM
and test it again
or with a simple wipe on both data and dalvik, without reflashing the rom
try that
RorixRebel said:
go into CWM mode and theres an option
wipe data/factory reset
advanced -> wipe dalvik cache
reflash the rom if you are still inside CWM
and test it again
or with a simple wipe on both data and dalvik, without reflashing the rom
try that
Click to expand...
Click to collapse
tryed it but didnt helped..
Similar problem happened to me several times when i was using MIUI and CM7.
have you tried reboot your router or join some other wireless network?Maybe it's not a ROM related problem.
Can someone help me flash this ROM? " http://forum.xda-developers.com/showthread.php?t=1844343 "
I've rooted then clockworkmod recovery and wipe cache and user data and then install zip from sd card
but when i reboot it always never boot past the screen with a yellow triangle can someone give me a complete guide from rooting cwm to flashing this rom?
andyzeng1993 said:
Can someone help me flash this ROM? " http://forum.xda-developers.com/showthread.php?t=1844343 "
I've rooted then clockworkmod recovery and wipe cache and user data and then install zip from sd card
but when i reboot it always never boot past the screen with a yellow triangle can someone give me a complete guide from rooting cwm to flashing this rom?
Click to expand...
Click to collapse
Flash kernel with Odin.[http://forum.xda-developers.com/showthread.php?t=1617219]
After your phone is booted put the phone into recovery modes., In CWM do you wipe data / wipe cache / wipe Dalvik cache / format system in mounts and storage.Then install Rom from sdcard.
andyzeng1993 said:
Can someone help me flash this ROM? " http://forum.xda-developers.com/showthread.php?t=1844343 "
I've rooted then clockworkmod recovery and wipe cache and user data and then install zip from sd card
but when i reboot it always never boot past the screen with a yellow triangle can someone give me a complete guide from rooting cwm to flashing this rom?
Click to expand...
Click to collapse
have you checked md5sum: e9c809385764bc6083616ce8cd5b0f36?
once downloaded, it should have the same md5..
wow.. size: 150.21mb? that's pretty lite
Tequila6808 said:
Flash kernel with Odin.[http://forum.xda-developers.com/showthread.php?t=1617219]
After your phone is booted put the phone into recovery modes., In CWM do you wipe data / wipe cache / wipe Dalvik cache / format system in mounts and storage.Then install Rom from sdcard.
Click to expand...
Click to collapse
is this a different ROM? i really dont know what ROM to install and this sounds like it would be a lot easier
andyzeng1993 said:
is this a different ROM? i really dont know what ROM to install and this sounds like it would be a lot easier
Click to expand...
Click to collapse
thats not a rom ma8, but a kernel to root ur phone first, so that u can install any custom rom of ur choice
andyzeng1993 said:
is this a different ROM? i really dont know what ROM to install and this sounds like it would be a lot easier
Click to expand...
Click to collapse
what he is trying to say is that you should flash the kernel AFTER you flash your ROM
the ROM you chose is [CM10][Jellybro] i9100 Nightly Kangs, yes?
anyway..
here is what you should do
1. flash your rom
2. flash gapps for cm10
3. flash a kernel [an example of which is Dorimanx Kernel]
if you are still confused on some terms, please refer here
I hope this helps
EDIT:
you should root your phone first
You know, after flashing a new rom booting may take some more time, at least a few minutes. Have you been waiting enough time?
First, check md5sum of ROM [what Saywhatt wrote a few posts back]
a. If you are no longer in recovery modes then you can get a kernel [tar file] Flashing with Odin.
If your phone then starts normally, then flash the ROM you want through CWM.
*** wipe data / wipe cache / wipe Dalvik cache / format system in mounts and storage / flash ROM from sdcard***
b. If you can get into recovery mode, not flash with Odin, but do these same steps;
**** wipe data / wipe cache / wipe Dalvik cache / format system in mounts and storage / flash ROM from sdcard***
PS. If it fails in step a first flash stock ROM with Odin
sorry for my bad english
saywhatt said:
what he is trying to say is that you should flash the kernel AFTER you flash your ROM
the ROM you chose is [CM10][Jellybro] i9100 Nightly Kangs, yes?
anyway..
here is what you should do
1. flash your rom
2. flash gapps for cm10
3. flash a kernel [an example of which is Dorimanx Kernel]
if you are still confused on some terms, please refer here
I hope this helps
EDIT:
you should root your phone first
Click to expand...
Click to collapse
I installed stock ICS, rooted and has recovery mod, wiped cache data battery dalvik, installed the ROM in recovery mode, installed Gapps, and installed kernel, and now it boots to dorimanx's kernel screen and it stops.. and turns black... same thing
andyzeng1993 said:
I installed stock ICS, rooted and has recovery mod, wiped cache data battery dalvik, installed the ROM in recovery mode, installed Gapps, and installed kernel, and now it boots to dorimanx's kernel screen and it stops.. and turns black... same thing
Click to expand...
Click to collapse
which kernel have you flashed from Dorimanx?
You need to flash the JB kernel of Dorimanx (v7.x)
Tequila6808 said:
which kernel have you flashed from Dorimanx?
You need to flash the JB kernel of Dorimanx (v7.x)
Click to expand...
Click to collapse
i flashed this "http://androidforums.com/galaxy-s2-international-all-things-root/632804-dorimanx-kernel-ics-jb-dummies-guide.html"
in the
"Downloads
Dorimanx kernel downloads for ICS/JB, (v5.x) and JB+Mali, (v7.x)."
downloaded and flashed this in recovery
Tequila6808 said:
which kernel have you flashed from Dorimanx?
You need to flash the JB kernel of Dorimanx (v7.x)
Click to expand...
Click to collapse
I flashed this
"Downloads
Dorimanx kernel downloads for ICS/JB, (v5.x) and JB+Mali, (v7.x).
Hawker's GS2Wiper download."
Under this link " http://androidforums.com/galaxy-s2-...804-dorimanx-kernel-ics-jb-dummies-guide.html "
andyzeng1993 said:
i flashed this "http://androidforums.com/galaxy-s2-international-all-things-root/632804-dorimanx-kernel-ics-jb-dummies-guide.html"
in the
"Downloads
Dorimanx kernel downloads for ICS/JB, (v5.x) and JB+Mali, (v7.x)."
downloaded and flashed this in recovery
Click to expand...
Click to collapse
Go to :http://dorimanx.shine.sk/ and flash v7.4 JB-MALI
Tequila6808 said:
Go to :http://dorimanx.shine.sk/ and flash v7.4 JB-MALI
Click to expand...
Click to collapse
thanks i got it working but i keep getting a message says "unfortunately system UI has stopped working" ???
and all my contacts are gone? but my contacts are all saved in SIM card? but nothing pops up...
and also my drop down menu isn't working, when i scroll down from the top, nothing drops down...
andyzeng1993 said:
thanks i got it working but i keep getting a message says "unfortunately system UI has stopped working" ???
and all my contacts are gone? but my contacts are all saved in SIM card? but nothing pops up...
and also my drop down menu isn't working, when i scroll down from the top, nothing drops down...
Click to expand...
Click to collapse
Reflash Rom without wipe and wipe cache.Or try another Rom.
Tequila6808 said:
Reflash Rom without wipe and wipe cache.Or try another Rom.
Click to expand...
Click to collapse
any rom you suggest?
andyzeng1993 said:
any rom you suggest?
Click to expand...
Click to collapse
Yeah stock 4.0.3 and leave it at that.
I dont think you are cut out for all this modding
andyzeng1993 said:
any rom you suggest?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1569686
I am updating my jellybam rom from 330 to 5.xx version
and I think it gave my phone a boot loop
what should I do?
According to the post i can update without wiping
what's the problem
hdxd159 said:
I am updating my jellybam rom from 330 to 5.xx version
and I think it gave my phone a boot loop
what should I do?
According to the post i can update without wiping
what's the problem
Click to expand...
Click to collapse
Have you tried to re-flash??
Have you tried to flash kernel via recovery/download modes?
Try to wipe everything via recovery
ankur.co.in said:
Try to wipe everything via recovery
Click to expand...
Click to collapse
But that will wipe all his appdata and hes obviously trying to avoid that from what he has said.
Wipe cache and devlik cache
Hi guys, you can tell me how to install this rom? http://forum.xda-developers.com/showthread.php?t=2012666
What kernel should I use for better results?
I think like any other rom...
Put it into your sd-card, reboot to CWM and do the wipes(Factory reset, wipe cache, wipe dalvik cache, format system) and the install the .zip
But first of all you should flash the kernel which is given in the download(together with the rom)
AW: [Q] How to install this rom? xD
I think he better should not format system
Just wipe data/factory reset, wipe cache and advanced -> wipe dalvik cache!
Sent from my Nexus 7 running Android 4.2.1
I'm doing it everytime I flash a new rom
Nothing wrent wrong :fingers-crossed:
Any ICS kernel is compatible. I strongly recommend MESA Hybrid v3.5 or LuPuS v3. I also recommend to format system before flashing new ROM. I've done it over 100 times safely. You'll avoid a lot of problems.
malte180684 said:
I'm doing it everytime I flash a new rom
Nothing wrent wrong :fingers-crossed:
Click to expand...
Click to collapse
I think he should first do it without wiping system and incase it was required and he stuck in a bootloop, then he can simply do the process again with wiping system
Press THANKS if I helped,
Regards,
AJ
I tried the rom(with rage kernel 3.2), and always go in bootloop
make sure u already have ur ROM on sdcard and the others (wifi-fix.zip or whatever)
on CMW, u can safely wipe /system when u wanna flash new ROM, but REMEMBER not to reboot your phone AFTER u wipe /system. if u do this, u will see "new boot kernel animation" a.k.a BOOTLOOP.
after wipe /system,/cache,/dalvik,/data,/sd-ext then next thing is install ur ROM.
if u using TWRP, its not necessary to wipe /system bcoz TWRP will wiping /system by itself when u install new ROM.
yes, i sent from my phone using Xda Premium, so what?
Click to expand...
Click to collapse
Hi, all!
I have that annoying problem with all the 4.3 ROM I've tried with no exception. Everything is fine until the first reboot. Then it's stuck on the first Galaxy SIII boot logo. I'm using TWRP - the latest version if it matters.
I always wipe everything first.
Please give more details on how you flash it.
Enviado do meu GT-I9305 utilizando o Tapatalk now Free
nikolav75 said:
Hi, all!
I have that annoying problem with all the 4.3 ROM I've tried with no exception. Everything is fine until the first reboot. Then it's stuck on the first Galaxy SIII boot logo. I'm using TWRP - the latest version if it matters.
I always wipe everything first.
Click to expand...
Click to collapse
!!ALL QUESTIONS GO IN THE Q&A FORUM!! OR THEY MAY BE DELETED!!
nikolav75 said:
Hi, all!
I have that annoying problem with all the 4.3 ROM I've tried with no exception. Everything is fine until the first reboot. Then it's stuck on the first Galaxy SIII boot logo. I'm using TWRP - the latest version if it matters.
I always wipe everything first.
Click to expand...
Click to collapse
If you did all required wipes and followed the instructions did you try a different recovery? I read in the SB thread for example of people having issues with TWRP
Sent from my Nexus 7 (2013)
I am sorry for the wrong section. May I ask some to move it to Q&A?
I always wipe data, cash, dalvik cash, system. Then install the ROM and gapps...
After the restart I set up the google account and etc. And after the first restart the phone freezes. That's all.
I'll try with different recovery.
PS. I've just tried CWM recovery 6.0.3.3. and Omega AOSP v9. Still the same.
Try cwm 6.0.3.6 and after you install the rom and after its set up go to recovery and factory reset
nikolav75 said:
I am sorry for the wrong section. May I ask some to move it to Q&A?
I always wipe data, cash, dalvik cash, system. Then install the ROM and gapps...
After the restart I set up the google account and etc. And after the first restart the phone freezes. That's all.
I'll try with different recovery.
PS. I've just tried CWM recovery 6.0.3.3. and Omega AOSP v9. Still the same.
Click to expand...
Click to collapse
That's strange, I run Philz recovery and every 4.3 flash till now went through without issue.
Sent from my GT-I9300 using xda app-developers app
I tried all the recoveries I could find. Including Philz. Still the same.
And something else strange. I installed CWM, CWM, touch and Philz and with them I made backups. After restoration of the backup the phone freezes. I also tried to install Omega 49 and the installation goes OK, but freezes before the first start-up.
The only solution was to install manually TWRP (Odin) to restore some of my old backups. I'm beginning to think that there is something wrong with my phone. It's black if it is important.
Suggest total wipe of phone install your stock rom and test
Hi,
I just want to say I'm also having the same problem.
Started using TWRP with full wipe, same issue on 4.3 and no issues on 4.2.
On latest CWM same problem and 4.2 wont even pass the first boot on Samsung logo.
Also had to use Odin to get back on TWRP and flash a 4.2 rom again.
Anyway there is one more thing I would like to try but haven't had the chance to do so, is installing the latest modem and ril. But I'm kind skeptic about that currently because there is also some risks and my S3 is my daily driver.
Don't change the ril on any custom as you stand a big chance of breaking the calls and Tex's. Modem yes but not ril. Do change to cwm and retry.
andrewwright said:
Don't change the ril on any custom as you stand a big chance of breaking the calls and Tex's. Modem yes but not ril. Do change to cwm and retry.
Click to expand...
Click to collapse
Thanks for the info, I was planning to read more about it before I would make an attempt. BTW already tried CWM that only made things worse, couldn't flash any rom without getting stuck on samsung screen.
bla166 said:
Thanks for the info, I was planning to read more about it before I would make an attempt. BTW already tried CWM that only made things worse, couldn't flash any rom without getting stuck on samsung screen.
Click to expand...
Click to collapse
You are doing a full wipe?. System and data is the main thing to wipe not just factory reset. So go into mounts and storage and format data,system and cache there then flash the rom /gapps.
andrewwright said:
You are doing a full wipe?. System and data is the main thing to wipe not just factory reset. So go into mounts and storage and format data,system and cache there then flash the rom /gapps.
Click to expand...
Click to collapse
yes tried that, also used the mega wipe zip thing
Start fresh and flash stock with Odin then try again after you root and install cwm.
andrewwright said:
Start fresh and flash stock with Odin then try again after you root and install cwm.
Click to expand...
Click to collapse
Tried to go stock and flashed a 4.3 rom again that fixed my problem. =)
Thanks! :good:
I'll try it too. And one stupid question. Where do I find a stock ROM? I never did it before
nikolav75 said:
I'll try it too. And one stupid question. Where do I find a stock ROM? I never did it before
Click to expand...
Click to collapse
http://www.sammobile.com/
Thank you!
But nothing helped. I flashed a stock ROM, with Odin. First I tried with TWRP, and the second time (again after flashing stock) with CWM recovery. I tried two 4.3 ROMs. They both can't boot after the first reboot.
nikolav75 said:
Thank you!
But nothing helped. I flashed a stock ROM, with Odin. First I tried with TWRP, and the second time (again after flashing stock) with CWM recovery. I tried two 4.3 ROMs. They both can't boot after the first reboot.
Click to expand...
Click to collapse
Hi, I think I did the following steps to get it working on my device.
1. Flash stock with odin
2. Hard reset
3. Boot up and finish first run menus
4. Flash twrp with odin
5. Format data with twrp
6. Flash 4.3 rom