[Q] sola doesn't boot after flashing a zip (soft-bricked?) - Sony Xperia P, U, Sola, Go

i was using some jelly bean sony rom by divaksh (it had cwm touch) and i wanted to try the new cm10.2 rom by munjeni
i downloaded the cm10.2, put it on my external sd card through a usb micro-sd reader and then put the µsd back in the phone
i selected "reboot to recovery" from the phone's power menu (i had an xposed module for more power menu options)
then i noticed that the phone didn't reboot, but it had turned off completely
i held the power button and the phone vibrated but didn't power on
it powered on on the second try, i then went to the cwm recovery by tapping the volume down key
(i was going to make a backup of the current system, but i forgot it lol)
i flashed the cm10.2 zip (cm10.2_pepper-ota-eng.root_Build.1.zip) without doing any wipes, because i wanted to get to the correct version of cwm recovery
(i would've properly done the wipes/formats from the cwm recovery that is in the cm10.2 kernel)
it finished flashing the zip and i rebooted my phone, but then it didn't power on anymore
now when i hold down the power button, the phone makes a short vibration but nothing else
.
if i plug the phone to a charger, the led lights up (red) for approximately a second and then turns off
if i hold down "volume-down" and the power button, the phone vibrates once and flashes the led (green)
i've tried going into flashmode and fastboot mode but the light doesn't stay on for long and sony mobile flasher doesn't even notice the phone even though the drivers are installed
the "hold down power button and vol-up"-thing also works but it doesn't seem to do anything else than vibrate
what should i do?

---

Is your bootloader unlocked?
If yes then flahs
Sent from my LT22i using XDA Premium 4 mobile app

---

Hamza Murad said:
If yes then flahs
Click to expand...
Click to collapse
what?

---

Is it unlocked?
When I bricked my xperia p I flashed a custom kernel which allowed me to enter Cwm and then flashed the stock rom. I am new to this flashing thing so I recommend that you ask someone experienced what to do. I just shared my experience of recovering from a softbrick. Don't flash new things blindly but ask someone experienced before doing so.
Sent from my LT22i using XDA Premium 4 mobile app

---

the bootloader is unlocked, and i'm not new to this "flashing thing"

---

anyone? the phone still hasn't woken up

---

download firmware for your p and flash using flashtool...

---

Osku958 said:
the bootloader is unlocked, and i'm not new to this "flashing thing"
Click to expand...
Click to collapse
Have you used flashtool to flash firmware before on that PC?
Have you installed flashtool and it's drivers (sola, flash & fastboot mode).?
Make sure the phobe is off, press power + volume up untill you feel 1 + 3 vibrations and see if it stay in flash mode longer.

---

Just Flash stock

---

i have nearly the same problem
my xperia u was running with 4.1 then i restored my ta backup its mine not for someone else then i pressed reboot instead of power off then my phone is dead no vibration no led except the one when i plug it to charger just one red led then nothing

---

AndroidNoob69 said:
Just Flash stock
Click to expand...
Click to collapse
how? the phone doesn't boot and flashtool doesn't recognize it

---

Same problem here, I think that Munjeni's post is bad written.

---

Ok, I fixed it, follow my instructions as they goes. You have to flash the .img kernel that CM10.2.zip comes from.
For flashing it, go as follows...
First try to install the following drivers, with Flashtool. The executable is in C:\\Flashtool\drivers
Run as adminsitrator and follow screen instructions, allow any driver install.
When it's ready, try to plug in the phone in fastboot mode (turn off, hold power and vol up and release power button, led has to turn blue/violet/pink, whatever, a color like that)
Run flashtool.
Flashtool will recognize the phone as the log says, if its not try to install drivers mannually.
If it's recognized then click the black lightning button and select fast boot mode.
At the right side click "Select kernel to flash" and browse the kernel that comes in the .zip. (in the file you've downloaded you have to extract a boot.ini because is the main kernel to make the ROM work, so you have to put somewhere else, I prefer desktop)
When selected, log writes all the procedure until it show an "OKAY[time]" message.
Finally click "Reboot device into system" in the center side and wait until boots.
It should be working now, I spent a lot of hours investigating, but finally I fixed, hope it works for you too!
If there's an error or some question, feel free to post.

---

manudo said:
Ok, I fixed it, follow my instructions as they goes. You have to flash the .img kernel that CM10.2.zip comes from.
For flashing it, go as follows...
First try to install the following drivers, with Flashtool. The executable is in C:\\Flashtool\drivers
Run as adminsitrator and follow screen instructions, allow any driver install.
When it's ready, try to plug in the phone in fastboot mode (turn off, hold power and vol up and release power button, led has to turn blue/violet/pink, whatever, a color like that)
Run flashtool.
Flashtool will recognize the phone as the log says, if its not try to install drivers mannually.
If it's recognized then click the black lightning button and select fast boot mode.
At the right side click "Select kernel to flash" and browse the kernel that comes in the .zip. (in the file you've downloaded you have to extract a boot.ini because is the main kernel to make the ROM work, so you have to put somewhere else, I prefer desktop)
When selected, log writes all the procedure until it show an "OKAY[time]" message.
Finally click "Reboot device into system" in the center side and wait until boots.
It should be working now, I spent a lot of hours investigating, but finally I fixed, hope it works for you too!
If there's an error or some question, feel free to post.
Click to expand...
Click to collapse
That was "the long run" for windows-guys.
For Linux - no drivers needed anyways - just download fastboot from anywhere and look for kernel. Put them in a personal directory. Open and run in a terminal (some have to be login as su) "fastboot flash boot kernel.img" (or whatever kernel is called...), plug phone in usb, while press and hold power and volume-up buttons. Blue LED comes shining and terminal tell you the flashing.
Unplug or type "fastboot reboot" to re-start phone.
Sure, you also can use FlashTool, too. But for only flashing a kernel it is not needed. Only for flashing stockrom ftf. But this is another story.

---

i happens to me yesterday
Hi ! Dont worry u r not the first to face this problem i also face this problem yesterday.. my phone was on JB 4.1.2 i download custom ICS rom and install it through CWM Recovery mode, when my new custom Rom starts it stucks on Boot screen and then nothing happens i tried but my phone was in danger... i was worried then i install flash tool and downlaod ICS Rom for Flastool and install that after severals trys i was now ion ICS v4.0.4..
Just Press volume up key and power simultanly when phone vibrtes three time leave it for 30 sec. and then run Flashtool and follow step to install another or same Rom for Falshtool & You r Done ...:good: Sorry for my bad english and type mistakes...
Osku958 said:
i was using some jelly bean sony rom by divaksh (it had cwm touch) and i wanted to try the new cm10.2 rom by munjeni
i downloaded the cm10.2, put it on my external sd card through a usb micro-sd reader and then put the µsd back in the phone
i selected "reboot to recovery" from the phone's power menu (i had an xposed module for more power menu options)
then i noticed that the phone didn't reboot, but it had turned off completely
i held the power button and the phone vibrated but didn't power on
it powered on on the second try, i then went to the cwm recovery by tapping the volume down key
(i was going to make a backup of the current system, but i forgot it lol)
i flashed the cm10.2 zip (cm10.2_pepper-ota-eng.root_Build.1.zip) without doing any wipes, because i wanted to get to the correct version of cwm recovery
(i would've properly done the wipes/formats from the cwm recovery that is in the cm10.2 kernel)
it finished flashing the zip and i rebooted my phone, but then it didn't power on anymore
now when i hold down the power button, the phone makes a short vibration but nothing else
.
if i plug the phone to a charger, the led lights up (red) for approximately a second and then turns off
if i hold down "volume-down" and the power button, the phone vibrates once and flashes the led (green)
i've tried going into flashmode and fastboot mode but the light doesn't stay on for long and sony mobile flasher doesn't even notice the phone even though the drivers are installed
the "hold down power button and vol-up"-thing also works but it doesn't seem to do anything else than vibrate
what should i do?
Click to expand...
Click to collapse

---

akkufix said:
That was "the long run" for windows-guys.
For Linux - no drivers needed anyways - just download fastboot from anywhere and look for kernel. Put them in a personal directory. Open and run in a terminal (some have to be login as su) "fastboot flash boot kernel.img" (or whatever kernel is called...), plug phone in usb, while press and hold power and volume-up buttons. Blue LED comes shining and terminal tell you the flashing.
Unplug or type "fastboot reboot" to re-start phone.
Sure, you also can use FlashTool, too. But for only flashing a kernel it is not needed. Only for flashing stockrom ftf. But this is another story.
Click to expand...
Click to collapse
If I wrote for Windows 8 there will be more than that, believe me. Managing Android with Linux is a lot easier, from flashing to programming.
But, face it, Windows is the standard here.

---

manudo said:
If I wrote for Windows 8 there will be more than that, believe me. Managing Android with Linux is a lot easier, from flashing to programming.
But, face it, Windows is the standard here.
Click to expand...
Click to collapse
That's why i'm working over 8 years till now with Linux.