Hello expert please solve my big trouble i am trying odexer zip file installing file install sucessfull show your system odexer but now click to reboot ?there is big trouble phone no swich on? what i do?
:my phone gionee g pad2
:recovry TWRP 2.4.1.0
Help me
Plug phone in and try switching on?
Hold power button down for 20 seconds. Anything on screen?
LooieENG said:
Plug phone in and try switching on?
Hold power button down for 20 seconds. Anything on screen?
Click to expand...
Click to collapse
where plug phone and on process only boot animation show
Can you boot to TWRP?
With USB, does Windows recognise the phone?
LooieENG said:
Can you boot to TWRP?
With USB, does Windows recognise the phone?
Click to expand...
Click to collapse
no bro only format option show!
.not swich on ? Bro give me any zip file zip file installing worked and ? Any new rom option jelly bean ?
Help any expert please any new rom who and how install system rom not worked
Help me any please???
abhilaab said:
Help me any please???
Click to expand...
Click to collapse
any help me? my phone swiched of how swich on
abhilaab said:
any help me? my phone swiched of how swich on
Click to expand...
Click to collapse
help any expert
Help me please
abhilaab said:
Help me please
Click to expand...
Click to collapse
listen any one
abhilaab said:
listen any one
Click to expand...
Click to collapse
can you boot to recovery? if not try Flashing CWM or TWRP recovery
If that helps
First of all charge phone battery, if it cannot be charged within phone, use some alternate method
then download stock rom for gionee gpad g2 from vendor website
and flash that ROM
I do hope it will be helpful.
and please don't panic. Just try and it will be ok
Flash stock rom with SP flash tools
Go to Walton forums and download the stock rom for your phone.Install VCOM drivers(or it won't detect your phone) and flash it.
Then root it and install a recovery ~ You can find info about them in the walton forum from your phone.
If you are using walton primo n1, here's the kitkat rom by DevSkilled : http://forum.xda-developers.com/android/development/pure-xperia-rom-gionee-gpad-g2-t2806137
Related
Hi People, I'm from Poland.
Yesterday I rooted my alcatel one touch idol 6030x using Framaroot. Everything went fine, then I launnched chainfire3d, that reseted my phone and...yea, and my phone got stuck at first splash. Well, I think I hardbricked my idol. How to "resurrect" it? I tried using this: http://forum.xda-developers.com/showthread.php?t=2206421 , but my pc cannot find my phone. After installing drivers PC cannot find drivers, so I can't do anything, because MTK can't find the phone. I wanna use this http://alcatelstar.blogspot.com/2013/08/how-to-restore-backup-alcatel-idol-star.html . I've already read this http://forum.xda-developers.com/showthread.php?t=571457 but fastboot command doesn't work via CMD.
Thank's for the answers.
@refresh
@refresh again
Install TWRP Recovery, then restore one of this ROM's, but uncheck UBOOT!
01001
https://www.dropbox.com/s/1khl4zficifxr4h/stock_rom_6030x.7z
01003T
https://docs.google.com/file/d/0B6hn-8jN_odQSWFCLTJPR0pTT0U/edit
Is there any other way to flash a ROM without TWRP or CWM?? I'm asking because my 6030x won't start at all. I got the drivers, the computer sees it but the phone's display remains black.
Thank you!!!
same problem
neobnro said:
Is there any other way to flash a ROM without TWRP?? I'm asking because my 6030x won't start at all. I got the drivers, the computer sees it but the phone's display remains black.
Thank you!!!
Click to expand...
Click to collapse
I have the same problem with my 6030x i am intresting in a stock rom or custom to instal from CWM ....please help us
Hi
Ihave the same problem! plz help
How do you kill them in first place ?
Sent from my ALCATEL ONE TOUCH 6030X using XDA Premium 4 mobile app
Full backup 6030x
Hi .. I am looking for a full backup 6030x branded Telekom Slovak Republic
Thank you in advance for your help.
Sorry for my bad English
Caute zhanam zalohu na 6030x.Telefon musi byt brandovany na Slovensku v Telekome (Mozno je verzia rovnaka aj pre Cesku republiku.-ale to neviem...)
Vopred dakujem za pomoc.
My friend's 6030x is not detected on pc,
And he doesnt have cwm or twrp
It just bootloops...any suggestions?
I'm also experiencing this issue. has anyone fixed the problem?
Solution that worked for me:
Connect the phone to the charger
Switch it off (10 sec press power button)
As soon as the led light up and the phone screen is black, disconnect it from the charger
The phone should remain off ( wait for 10 sec to be sure )
Connect again the charger and then unplug it after 5 sec
Now try to boot the recovery (power + volume up )
Once you are in recovery:
fix the permission to enable r/w on system.
Clean Cache and Dalvin Cache
if you need flash it again ( you can push file with adb )
Credits to Francecso from stackexchange point com (i'm not allowed to paste external links for the moment)
I tried to flash recovery for my Videocon VT75C using RockChip Android Tool
I mistakenly clicked erase IDB
However the task is failed my tablet is not booting
It is not even showing boot logo or not booting into recovery
Please reply as fast as possible :crying::crying:
srikar nvvs said:
I tried to flash recovery for my Videocon VT75C using RockChip Android Tool
I mistakenly clicked erase IDB
However the task is failed my tablet is not booting
It is not even showing boot logo or not booting into recovery
Please reply as fast as possible :crying::crying:
Click to expand...
Click to collapse
is anything work. charging,connecting to pc or its completely dead
kenxda33 said:
is anything work. charging,connecting to pc or its completely dead
Click to expand...
Click to collapse
Yes but I don't think it is a sign that tablet is not dead
When I connect to charger only one red LED is glowing thats it :crying:
did u solve your problem
srikar nvvs said:
Yes but I don't think it is a sign that tablet is not dead
When I connect to charger only one red LED is glowing thats it :crying:
Click to expand...
Click to collapse
i had faced the same problem..only charging..
not dectect by usb cable
and
start and off...only show videocon logo only..
if anybody know pls let me know...:highfive:
.first of all I rooted the phone using super one click, then I installed cwm recovery and flashed this http://forum.xda-developers.com/show...t=2317616.then the phone didn't boot up and remained at the lg logo .so I followed your guide and cross refrenced for these guides too http://forum.xda-developers.com/show....php?t=1942836 , http://xdaroot.com/how-to-root-lg-p9...-easily-guide/ and stopped at step 18 in your guide as nothing happens also I used the simple tool 2.1.i failed at flashing xloader, boot.img,and uboot.img,but after many tries I flashed them ,but couldn't flash cwm .I then continued to use smart flasher by opening download mode but by omapboot not by pressing vol down because I couldn't. Finally smart flasher stopped flashing because the mobile disconnects by itself at the middle of flashing. so can you tell me why I cannot flash cwm via fastboot or why when I use smar flasher it disconnects and stops flashing.maybe I should change the rom ???
please try to help me urgently
thank you
mohd1995 said:
.first of all I rooted the phone using super one click, then I installed cwm recovery and flashed this http://forum.xda-developers.com/show...t=2317616.then the phone didn't boot up and remained at the lg logo .so I followed your guide and cross refrenced for these guides too http://forum.xda-developers.com/show....php?t=1942836 , http://xdaroot.com/how-to-root-lg-p9...-easily-guide/ and stopped at step 18 in your guide as nothing happens also I used the simple tool 2.1.i failed at flashing xloader, boot.img,and uboot.img,but after many tries I flashed them ,but couldn't flash cwm .I then continued to use smart flasher by opening download mode but by omapboot not by pressing vol down because I couldn't. Finally smart flasher stopped flashing because the mobile disconnects by itself at the middle of flashing. so can you tell me why I cannot flash cwm via fastboot or why when I use smar flasher it disconnects and stops flashing.maybe I should change the rom ???
please try to help me urgently
thank you
Click to expand...
Click to collapse
any help ??/
mohd1995 said:
any help ??/
Click to expand...
Click to collapse
help please
I too can't flash cmw but the rooting process is so smooth i really need help on flashing the custom recovery
Sent from my GT-S7262 using Tapatalk
Hi ,
Yesterday I tried changing my font using the Ifont application. After doing that my phone restarted and its stuck on the Logo screen.
I tried going to the recovery mode but nothing is working. Please help me out.
90Rocker said:
Hi ,
Yesterday I tried changing my font using the Ifont application. After doing that my phone restarted and its stuck on the Logo screen.
I tried going to the recovery mode but nothing is working. Please help me out.
Click to expand...
Click to collapse
No worry bro !!
Just download 4.2.1 custom firmware and flash it via SP Flash Tools.
For more Information, Go to :
http://micromaxcanvas.co.in/upgrade-canvas-hd-from-v4-1-2-to-v4-2-1/
Hit thanks :good: if answer helped you
90Rocker said:
Hi ,
Yesterday I tried changing my font using the Ifont application. After doing that my phone restarted and its stuck on the Logo screen.
I tried going to the recovery mode but nothing is working. Please help me out.
Click to expand...
Click to collapse
U hv to boot into Recovery Mode......der is no other way.....
Press Vol Up+Vol Down+Power OFF to get into Recovery Mode
If U hv a Nandroid Backup......then u cn use Restore option......or else u hv to flsh d stock ROM.......
I went to the service center and they upgraded my OS from 4.1.2 to 4.2.1
its resolved. thanks for your reply. next time will try to do by myself.
I tried to flash my Phone to CM 13 Marshmallow Using TWRP manager my device wasn't listed in that so i accidentally flashed Lenovo yog4 + WIFI & now I can't access my recovery mode, When ever I try to enter the Recovery mode The Phone just Vibrates twice & goes to normal boot.
Please Help me!!!!!! :crying:
Usamapk2002 said:
I tried to flash my Phone to CM 13 Marshmallow Using TWRP manager my device wasn't listed in that so i accidentally flashed Lenovo yog4 + WIFI & now I can't access my recovery mode, When ever I try to enter the Recovery mode The Phone just Vibrates twice & goes to normal boot.
Please Help me!!!!!! :crying:
Click to expand...
Click to collapse
I have the same prob, i just rooted z1 using kingroot app and installed twrp app from playstore and installed recovery from that app.
After which i can't access recovery mode. When ever i try it vibrates twice and goes to os again. note: i didn't unlock the bootloader is that a prob? sorry just new to all these. somebody please help.
oh ho so sad jiger :silly: :silly: :silly: :silly: :silly:
Christena421 said:
oh ho so sad jiger :silly: :silly: :silly: :silly: :silly:
Click to expand...
Click to collapse
Hey, help us
Usamapk2002 said:
I tried to flash my Phone to CM 13 Marshmallow Using TWRP manager my device wasn't listed in that so i accidentally flashed Lenovo yog4 + WIFI & now I can't access my recovery mode, When ever I try to enter the Recovery mode The Phone just Vibrates twice & goes to normal boot.
Please Help me!!!!!! :crying:
Click to expand...
Click to collapse
have you unlocked bootloader? i faced same prob after installing twrp from playstore app . i unlocked the bootloader now from cmd use this "fastboot -i 0x2b4c oem unlock" it'll give you error and tell you right code something like ".........%-go" use that and unlock once i've done this it took me to twrp recovery mode . and don't worry if it doesn't show oem info directly unlock it first. and if ur not sure u've already installed twrp just flash it from cmd after unlocking oem. guess that'll help you .