Ok i had been using bmm for some time. I had carbon in slot 1...and artmod in slot 2. Bmm was set to boot onto slot 2. Well i booted into carbon on slot 1. Then i tried to load up bmm to change the phone to boot slot 1...it had an error and said i had the wrong version of busybox. It forced me to unistall bmm. It wouldnt let me install it again with the same error. Then i reinstalled busybox and retried. Same error. Then i rebooted to go back to slot 2. Black screen now i cant get phone working. Does anyone know how i can get bmm back installed into my phone without having to start completely over? Thanks
Sent from my VS980 4G using Tapatalk
What happened now is the following: You've been forced to uninstall BMM. without it you don't have 2nd boot anymore and the stock slot just can play STOCK ROM. So, if you aren't running the stock ROM right now, I think there's no way to save your phone without reflashing everything again over fastboot. I had this problem many times, and I didn't found a solution other then replace the content in system partition with the original. And the phone just can boot if the data partition is empty or have the content of the RMO you're using. So, you also need to wipe data. Sorry.
Related
So I recently flashed ICS 6.14.79 onto my Razr Maxx and was trying to install safestrap so i can play with ROM's and such. I install safestrap.apk, then click the app icon in my drawer adn install recovery. Once I rebooot I get the option on splash screen to tap menu for recovery. I can get into recovery, I can make a backup of my system before switching to safemode and everything works just fine. I can reboot my system at this point and it will boot up fine. I can either wait the 10 seconds or I can hit search and it will boot.
But if I go through the safe menu and enable safeboot or safemode or whatever its called... my phone will NOT boot. it will get to the splash screen, and if i wait it goes to a black screen and goes NO FURTHER. the only way I can get it to boot is to hold the power and volume up and down keys for about 20 seconds ad my screen will flash, then I can hold just the power and it will reboot and I can go back into recovery and un do the safemode and it will boot.
I made sure I am using (or trying to use) 2.0, I have never installed bootstrap, this was a fresh loaded phone, razr utility 1.6 to load .181, then combo ics installer 0.3 to install ics 6.14.79. Rooted with teh ics installer which used the motofail exploit, loaded my apps and tried to flash the BEATS update...
Help please?
When you toggle the safe mode your still in the recovery screen you need to wipe cache dalvik cache wipe data /factory reset and format system then install your new rom and gapps before rebooting otherwise there is nothing to boot up. At least that's how I'm reading your post . So your in non safe you have your backup toggle safe then before rebooting wipe data/ factory reset wipe cache format system then dalvik cache then install rom and gapps if not part of rom most are not.. 4-29-12 gapps Then you can reboot. Some people have problems with charger hooked up try without it. Hopefully this will help.
Sent from my NookTablet using xda premium
but Im not trying to load a new ROM, I am wanting to continue using the one I currently have, I just wanted to add Beats to it... so your saying that I have to flash a new rom, and that safemode will NOT allow me to use my current rom....
I think toggling safemode creates a second ROM so you can go back to your first one if you need to. So when safe mode is active it boots into the second ROM. If flashing beats there is no ROM to boot in to.
To flash beats I would think you shouldn't enable safe mode cause you want it flashed to your ROM instead of a non existing one. Understand?
This is purely from my little knowledge of Safestrap. I generally use Bootstrap.
Sent from my DROID RAZR using XDA
If you don't wanna flash any roms than you could just use bootstrap. If you wanna use bootstrap you must clear off safestrap.
1 reboot into safestrap and disable safestrap reboot
2 open safestrap app and select uninstall
3 go to system settings manage apps and unistall safestrap.
After you've done those steps than you could get bootstrap razr from the market and flash beats audio. I don't know if theres a way to install with safestrap in non-safe mode, it was setup to protect your orginial rom and only flash in safe-mode. maybe someone else could comment further.
Hi all,
I've been trying to install Eclipse rom on my droid razr, everything goes alright, but when i reboot, it comes back to my stock moto ICS.
I've installed safestrap v.2.11. Then followed directions on how to use, like,
-Backup stock rom
-Enable safe strap
-Wipe cache, dalvik, factroy data and /system
-Install .zip from internal sdcard
-Then i reboot, but it gets stuck after dual core screen, i see a slight flash and it reboots, and this cycle just keep son repeating
But then when i go into safestrap and disable it, then it does boot up, but goes back to stock ics rom???
hsyasin said:
Hi all,
I've been trying to install Eclipse rom on my droid razr, everything goes alright, but when i reboot, it comes back to my stock moto ICS.
I've installed safestrap v.2.11. Then followed directions on how to use, like,
-Backup stock rom
-Enable safe strap
-Wipe cache, dalvik, factroy data and /system
-Install .zip from internal sdcard
-Then i reboot, but it gets stuck after dual core screen, i see a slight flash and it reboots, and this cycle just keep son repeating
But then when i go into safestrap and disable it, then it does boot up, but goes back to stock ics rom???
Click to expand...
Click to collapse
Uninstall safestrap 2.11 and install 3.05. Make an active slot and install rom there
heblu said:
Uninstall safestrap 2.11 and install 3.05. Make an active slot and install rom there
Click to expand...
Click to collapse
Can u kindly explain how to make an active slot and installing rom there, coz i tried making a partition using v2.11 and messed up my sdcard..
Plus, I did try running v3.something and it didn't work at all on my droid razr. Can u kindly post link to the download file?
Also, that safe strap v3.05 says its for droid bionic..
dont know if that has anything to do with not working with droid razr
hsyasin said:
Also, that safe strap v3.05 says its for droid bionic..
dont know if that has anything to do with not working with droid razr
Click to expand...
Click to collapse
I have SS3 on my razr. Look here for more info:
http://blog.hash-of-codes.com/how-to-safestrap/
I am running Razr ICS 4.0.4 safestrap 3.11.
Problem is when i try to restore a backup that I made, could have just made it 5 minutes ago( does samething to any backups) all that happens is the M logo comes up then the safestrap screen and I hit the button to boot phone normally it just goes to a black screen. I have do the 3 button reset to get back to safestrap. I then have to switch over to the stock rom slot, and that boots fine. I then have to go back into safestrap and delete rom slot 1 and re-create it to be-able to restore any backups. What is going on, what do I have to do to just be able to restore a backup without have to delete the rom slot and recreate it everytime? I made a post on Hashcode site as well. Would love to get this resolved!
Interesting
blackops11252 said:
I am running Razr ICS 4.0.4 safestrap 3.11.
Problem is when i try to restore a backup that I made, could have just made it 5 minutes ago( does samething to any backups) all that happens is the M logo comes up then the safestrap screen and I hit the button to boot phone normally it just goes to a black screen. I have do the 3 button reset to get back to safestrap. I then have to switch over to the stock rom slot, and that boots fine. I then have to go back into safestrap and delete rom slot 1 and re-create it to be-able to restore any backups. What is going on, what do I have to do to just be able to restore a backup without have to delete the rom slot and recreate it everytime? I made a post on Hashcode site as well. Would love to get this resolved!
Click to expand...
Click to collapse
Actually, after I went from Safestrap 2.__ to 3.11, every time I create a new Rom slot and try to Install a ROM into it, I get a black screen on reboot. The only thing that works for me is the stock at this point. I'm worried to revert to the previous Safestrap and some ROM's don't work with anything but the latest Safestrap, so unsure what to do.
Cmar
I got the same problem as your when using the safestrap 3.11. But then I noticed that every developer ask us to wipe before install roms.
I followed, and I succeeded most of my installation. But I still get the black screen randomly, even when I reinstall the rom that boots normal before.
Anyway, you could try wipe all between the time of recreate the rom-slot and install roms.
Hope this will help you!
sweetmeroy said:
I got the same problem as your when using the safestrap 3.11. But then I noticed that every developer ask us to wipe before install roms.
I followed, and I succeeded most of my installation. But I still get the black screen randomly, even when I reinstall the rom that boots normal before.
Anyway, you could try wipe all between the time of recreate the rom-slot and install roms.
Hope this will help you!
Click to expand...
Click to collapse
On my first install of Safestrap 3.11 on Motorola Droid Razr HD, I made a 1gb partition in slot 1, installed Batakang rom and rebooted. Worked fine (except I could only receive, not send sms/mms). Since then nothing has worked. I have even gone as far as factory reset my phone, re-rooted (Motochopper) and Unlocked Bootloader (Motopocalypse), re-installed safestrap, created new rom slot (tried slot 1 and 3) tried installing CM10 and AOKP unofficial builds downloaded from this site, no ammount of wiping before installing works. I can boot to stock rom fine but get black screen when booting into other roms. Holding down power key forces reboot into safestrap again.
I will first delete any ROM slot i created first then Easiest way to fix black screen is to boot to stock rom and select safestrap app open and chose uninstall recovery, reboot and do same thing but this time choose install recovery then reboot, can go back into safestrap now and all will be Good
Some ROMs are messed up like that as far as messaging goes
Hello all,
By using Safestrap, I wanted to flash a CM 11 Kitkat ROM to my XT912, but I ran into some complications that I will detail below. If anyone can follow what I did and tell me how to get out of this situation, I would be very appreciative.
The very first thing I did was gain root access for my phone. Using this script, http://forum.xda-developers.com/showthread.php?t=2192467, and after a few tries, I was able to root the phone and install Safestrap. But this was an earlier version of Safestrap than what the directions for installing the ROM said, so I then installed the updated version.
After installing Safestrap v 3.65 and installing the recovery, I then using Titanium backup (the free version) and made a backup of all my app data. When I booted into Safestrap, I immediately created a backup of the stock ROM. Then, using this guide: http://forum.xda-developers.com/showthread.php?t=2535920, I created a ROM slot, did the advanced wipe, flashed both the ROM and gapps .zip files, and wiped the Dalvik and the cache for the final time. This is where a problem occurred. After I tried wiping the Dalvik and the cache at the end, Satestrap said that the process had failed. Dumb me decided that it would be a good idea to then boot the phone anyway with the KK ROM selected.
In my phone's current state, it will not boot past the M logo. It can boot into fastboot, but when an option is selected, either the M logo appears again or the screen goes blank. I've tried reflashing the stock ROM using the 2nd option in the script, but every time I do that, the phone says it has a low battery. To try and solve this problem, I tried using this trick to get the phone to charge: http://forum.xda-developers.com/showthread.php?t=1549625, but it hasn't helped. Even after sitting overnight after doing this trick the phone still said low battery when I tried running the script.
Any ideas as to what I did and how I can go about solving it? Thanks for reading my post.
i mistakenly hit the format data on safestrap 3.75 then i found i lost everything even the restore rom. when i go back to stock rom, it can boot to amazon OS and the stock firm is 13.3.2
now i try to flash thor4.2 again, but i keep failing when i reboot, black screen and i have to force shut down. anyone know whats happening?