I have installed ClockworkMod (CWM) and accidentally deleted the android OS using CWM(selected wipe system and SD data).
Now i cannot reboot my phone and cannot connect it to the PC and Kies.
now how do i install android OS.
rohitmall10 said:
I have installed ClockworkMod (CWM) and accidentally deleted the android OS using CWM(selected wipe system and SD data).
Now i cannot reboot my phone and cannot connect it to the PC and Kies.
now how do i install android OS.
Click to expand...
Click to collapse
use odin to install your firmware
download odin (search in xda)
download your firmware( go to Samsung updates.com)=(search in google)
disable kies
then open odin
go to download mode on your phone by pressing home+power+ vol down
you will get a screen
press vol up you will go into download mode
connect your phone to pc
odin will show the port you connected
add the file you downloaded to pda in odin
the file normally should be a md5 or tar
then press start
when it finishes it will show pass and your phone will reboot
disconnect your phone and try again to mess it up
thanks
thanks for the help
please tell me something more that how can i upgrade my phone from android 2.3 to higher version.
or something else with my phone to improve its performance.
battery not showing correct status and USB function not working
i have recently factory reset and after which i am getting this problem of battery not showing correct status and USB function not working.
rohitmall10 said:
i have recently factory reset and after which i am getting this problem of battery not showing correct status and USB function not working.
Click to expand...
Click to collapse
how about you recalibrate your battery.... use your phone until its shutdown itself and charge it to 100% again....
rohitmall10 said:
thanks for the help
please tell me something more that how can i upgrade my phone from android 2.3 to higher version.
or something else with my phone to improve its performance.
Click to expand...
Click to collapse
CM 9 is available for ace duos(search on youtube), not so stable
CM 7.2 is also there with different mods(sd card not working, single sim)
for a stable one use A-droid and then flash DW ROM3.5
Samsung gt -s6802 ( sd card formated)
I have installed ClockworkMod (CWM) and accidentally deleted the android OS using CWM(selected wipe system and SD data). and formated sd card.
as you said in other post
I INSTALLED odin
disabled kies
then I opened odin
odin will showedthe port Iconnected
added the file i downloaded to pda in odin
when I press start
it shows
<OSM> Please wait..
<OSM> S6802DDMA1_S6802ODDLI4_S6802DDMA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
FAIL
PLEASE HELP ME SOLVE THE PROBLEM
baburadhakrishnan said:
I have installed ClockworkMod (CWM) and accidentally deleted the android OS using CWM(selected wipe system and SD data). and formated sd card.
as you said in other post
I INSTALLED odin
disabled kies
then I opened odin
odin will showedthe port Iconnected
added the file i downloaded to pda in odin
when I press start
it shows
<OSM> Please wait..
<OSM> S6802DDMA1_S6802ODDLI4_S6802DDMA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
FAIL
PLEASE HELP ME SOLVE THE PROBLEM
Click to expand...
Click to collapse
im facing the same problem have you found any solution till now ?
Related
A few moments ago I was trying to flash the stock ICS firmware to my SGH-I757M using Odin3 v1.85.
But, I made a serious mistake. I didn't notice that "Re-Partition" was checked for some odd reason. The flash failed.
I then restarted Odin and put my phone back into download mode and proceeded to try to re-flash the stock firmware.
It failed yet again.
This is the log from Odin:
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I757MUGLH2_I757MOYCLH2_I757MUGLH2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The phone now shows the following error: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I tried flashing just CWM and that won't work either. Kies also does not connect to the phone.
CharlieMPK said:
A few moments ago I was trying to flash the stock ICS firmware to my SGH-I757M using Odin3 v1.85.
But, I made a serious mistake. I didn't notice that "Re-Partition" was checked for some odd reason. The flash failed.
I then restarted Odin and put my phone back into download mode and proceeded to try to re-flash the stock firmware.
It failed yet again.
Click to expand...
Click to collapse
See if this helps
ysrini said:
See if this helps
Click to expand...
Click to collapse
So, I read through the guide and it does not refer to the SGH-I757M.
Is there something that I'm missing? I don't want to further my issue.
I bricked my SGH-i757m galaxy s2 hd lte
I tried to install Cyanogenmod 10 onto my sgh-i757m but it seems I may have used the wrong links to download the .zip files. I followed standard procedure in recovery mode (factory reset, clear cache) and instead of rebooting my phone just turned off. I had plenty of battery life (over 50%) and I cannot even start recovery mode!
No download mode, no recovery & no signs of life from phone ? Try a jig (highly unlikely to work). Also try King Rat's 'hotboot' method to try & jump start the phone (search). Otherwise, service centre for motherboard replacement or perhaps try a JTAG repairer (assuming it can be JTAG'd).
Dear Fellow Experts,
I am near about to die... seeking advice
I owned a SGSII bellow is config
Android version : 2.3.5
baseband :I9100XXK13
kernel : : 2.6.35.7-I1900ZKSK13-CL603802
[email protected]#2
Build :GINERBREAD.ZSK13
PDA : i9100zsk13
PHONE : i9100xxk13
CSC : i9100zsk13
Click to expand...
Click to collapse
Its already rooted.ANd I dont know who / how root this set . Also I have format Strogae/Sd card. nothing this there
. And I would like to,update it to ICS official release - which i download for sammobile.com .
last night I tried to update it via odin
i follow all the procedure - Enable USB debug mode -> Reboot in Download mode -> connected to odin -> yellow color shown- >
bellow happend
1st try : ( 9.23am - 10.12am )
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLP7_I9100ODDLP9_I9100DDLPA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> zImage
i have disconnect the phone after 45 minites. unplugged usb cable / remove - insert battery.. sarted the same procedure
2nd start 10.23Am - 11.15am
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLP7_I9100ODDLP9_I9100DDLPA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> zImage
Click to expand...
Click to collapse
2 times I tried - and filed . finally I did a factory reset - I have searched a lot- read thorw a lot- couldnt gater that courage to follow that all those procedure...
Note : Kies also saying - this device cant be update via kies- since its rooted and super user apps is there
Some one wise - pls advice what to do and how to do? or where to find a solution.
You know you're not suppose to have Kies on your computer while using Odin to flash?
He is right.. Kill all kies processes before you connect your mobile to pc for using odin
Sent from my GT-I9100 using xda premium
xDa_nightfury said:
He is right.. Kill all kies processes before you connect your mobile to pc for using odin
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Hello
That PC dont have Kies - but have USB driver downloaded from sammobile.
what to do now?
Nneel said:
Dear Fellow Experts,
I am near about to die... seeking advice
I owned a SGSII bellow is config
Its already rooted.ANd I dont know who / how root this set . Also I have format Strogae/Sd card. nothing this there
. And I would like to,update it to ICS official release - which i download for sammobile.com .
last night I tried to update it via odin
i follow all the procedure - Enable USB debug mode -> Reboot in Download mode -> connected to odin -> yellow color shown- >
bellow happend
2 times I tried - and filed . finally I did a factory reset - I have searched a lot- read thorw a lot- couldnt gater that courage to follow that all those procedure...
Note : Kies also saying - this device cant be update via kies- since its rooted and super user apps is there
Some one wise - pls advice what to do and how to do? or where to find a solution.
Click to expand...
Click to collapse
First of all , you have to do a factory reset and dont choose USB Debugging (It doesn't matter)
after you have done factory reset (Erase USB Storage too) , You Need To Power Off Your Device then you need to put your phone in Download Mode (Power + Home + Volume Down) , you will get a Yellow Warning , You need to press Volume Up key, then you are in download mode, now you have to make sure that Kies is not running on your PC and then run ODIN (Run As Administrator), after running ODIN, you need to connect your phone via USB .. Odin Will say Added!
After that you have to just choose the .zip file (Downloaded from Sammobile) on PDA and then just click start (Make sure re-partition is not checked, it should be un-ticked)..
and just wait and have patience your phone will be rebooted once its done
Hope it helps
I have the international version of the i9300.
Unrooted and no cwm.
AP: XXELLA
CP: NELK2
CSC: HTDELL2
Windows 8
Odin: Odin307
Often my phone would be not able to wake up, so i decided to factory reset to fix it. This made the phone restart and freeze (and the wakeup problem persists). My conclusion was problems with syncing, but not really sure. This made me want to try a new firmware.
However odin fails with every rom I try with:
-I9300XXEMC3_I9300NEEEMC1_I9300XXEMB6_HOME.tar
-I9300XXBLH3_I9300HTDBLH1_I9300NELH1_HOME.tar.md5
-CF-SGS3-CWM-v5.5-v1.5.tar
Gets stuck when trying to get the PIT. And then fails.
Have tried:
-Running odin as administrator
-Restarting pc
-Installing USB drivers for the s3
Thanks for any help!
Just tried another pc, no help. Got the Odin log here:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMC3_I9300NEEEMC1_I9300XXEMB6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
try install samsung kies since it contain latest usb driver
if still not working try borrow a friend / relative who using windows 7
Make sure you have USB Debugging enabled under Developer Options
Download the OXA Open Europe MC2 from sammobile you don't need to be rooted to flash the rom http://www.sammobile.com/firmwares/1/?model=GT-I9300&pcode=BTU
Flash this CF Auto Root via Odin to get root access
Woohoo. Installing kies worked.
Thanks MsElise
ag4751 said:
Make sure you have USB Debugging enabled under Developer Options
Click to expand...
Click to collapse
What happens if your phone is bricked and you cannot access developer options on phone?
I have kies installed but Odin does work.
dmuk said:
What happens if your phone is bricked and you cannot access developer options on phone?
I have kies installed but Odin does work.
Click to expand...
Click to collapse
USB debugging is completely irrelevant. This is an Android setting and is not used by recovery or download mode, so just ignore that...
I've been running wanamlite 14.6 (JB 4.1.2) on my Galaxy S2 i9100 for a few months without problems.
Yesterday, my phone turned off before I'd expect the battery to have run out. I charged it overnight and when I tried to turn it on this morning, it got to my lock screen (with battery indicator at the top) then went black and rebooted. The same thing happened about five times, so I went into the PhilZ recovery and did the Wipe Data/Factory Reset. When I rebooted, it got as far as the SAMSUNG logo with the blue swirl, then hung for a few minutes, before restarting and doing the same again. After a few restarts it gets to the "Samsung Galaxy" welcome screen in a foreign language with "Izberite jezik" written above the drop-down (despite the fact that I chose English as the installation language). This screen appears for a couple of seconds (and does not respond to touch) before rebooting again.
I've tried:
Re-flashing the ROM
Factory Reset (again)
Reinstalling the Siyah Kernel
Could anyone let me know what my next steps should be? This is my first rooted phone, and I haven't got a clue how this happened, or how to proceed...
Thanks in advance.
Flash a stock firmware via odin....
Sent from my GT-I9100 using xda premium
Thanks for the reply.
I've just tried that with Odin 3.07 and and I9100XWLSW_I9100XXMS2_I9100XEULS5_HOME.tar.md5
Odin gets stuck at "SetupConnection.."
I've tried a different cable, and a different USB port to no avail.
Plenty more to try, not just usb port and cable. Click the link in my signature and follow the guide there to troubleshoot.
Sent from a galaxy far, far away
I suggest trying once more flash ROM ，link：http://forum.xda-developers.com/showthread.php?t=2365701
I've tried downloading the firmware from the hotfile links in the post wufang640 linked to. Each time I get to 99% (after quite a while) it says "one second remaining" and then seems to hang. I've tried this in Firefox and IE and I get the same problem. Could this be antivirus related (I'm running Avast)?
I've downloaded the file again, using mega.co.nz, and this time the download completed successfully.
I unzipped the ZIP file and copied the I9100XWLSW_I9100XXMS2_I9100XEULS5_HOME.tar.md5 and the SS_DL.dll files to my C:\
I tried to open the ...tar.md5 file in 7zip but I get the following message:
"There is no correct record at the end of archive"
Does this mean the download failed (again)?
I tried to flash the file again on three different computers, with three USB cables (generic, official SGS2 cable, official SGS3 cable). I also tried all combinations of cable and computer and USB port.
Although the phone is detected by Odin - i get the "Added" message - it hangs every time on "SetupConnection.."
With Odin v3.04 I get this message:
<OSM> I9100XWLSW_I9100XXMS2_I9100XEULS5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
With Odin v3.07 I get this:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSW_I9100XXMS2_I9100XEULS5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
I can still get into the PhilZ recovery tool, and have access to the WanamLite 14.6 rom image on my external SD card. When I try to install this, I still get the foreign language "Samsung Galaxy" welcome message as before. I've tried so many things now, I have no idea if I'm rooted, not rooted, or what's going on.
Any further help, as ever, appreciated!
So I was trying to unroot my phone, to be able to play that new mobile nintendo game of all things and in the process of that got myself stuck in a boot loop, with my wits I tried on my own to get my phone out of the loop. With the TWRP recovery thing in hand I had mangaed to complete wipe my device I think. So now, it will load up to the sprint screen and sit there. I can boot up into TWRP and into the download mode; I don't think I can boot into the stock recovery thing. I tried to use Odin to get a OS onto my device but it said this "<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925PVPU1AOCF_G925PSPT1AOCF_G925PVPU1AOCF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
And on my phone it had said
SW REV CHECK FAIL DEVICE 3 BINARY 1
Please help me on this, I would rather not just have a soft bricked phone out of my own stupidity.
also not really sure what fastboot is but I don't think I can access it, When i try to hold the power vol up, down. It just turns the phone off (?) and shows the battery charging.
If you can go into recovery mode you just adb push a rom from your pc.
http://highonandroid.com/android-ro...r-android-in-a-bootloop-with-no-os-using-adb/
StillLiam said:
So I was trying to unroot my phone, to be able to play that new mobile nintendo game of all things and in the process of that got myself stuck in a boot loop, with my wits I tried on my own to get my phone out of the loop. With the TWRP recovery thing in hand I had mangaed to complete wipe my device I think. So now, it will load up to the sprint screen and sit there. I can boot up into TWRP and into the download mode; I don't think I can boot into the stock recovery thing. I tried to use Odis to get a OS onto my device but it said this "<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925PVPU1AOCF_G925PSPT1AOCF_G925PVPU1AOCF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
And on my phone it had said
SW REV CHECK FAIL DEVICE 3 BINARY 1
Please help me on this, I would rather not just have a soft bricked phone out of my own stupidity.
Click to expand...
Click to collapse
When i did this go into twrp and clear delvik. Cache. System
Sd card. And usb check em all coach.
Do it then reboot system and quickly press (power - volume down - and menu key all at once. Download a completely stock rar and install it using odin .
The id005 thing is all good . Dont mess with settings jusy navigate to .tar and flash
ilqs said:
If you can go into recovery mode you just adb push a rom from your pc.
Click to expand...
Click to collapse
As I had said up there I cant boot into recovery mode, whenever I try to my phone just boots into TWRP.
bipolargroup said:
When i did this go into twrp and clear delvik. Cache. System
Sd card. And usb check em all coach.
Do it then reboot system and quickly press (power - volume down - and menu key all at once. Download a completely stock rar and install it using odin .
The id005 thing is all good . Dont mess with settings jusy navigate to .tar and flash
Click to expand...
Click to collapse
I'm not sure I can get a rom in there through Odin, As I had posted up there whenever I tried to do that it gave me that error.
I would really appreciate some help here, been over 12 hours of me trying to fix it on my own. To no avail.
try samsung smart switch. it will download the original firmware that came with the phone and flash it for you..
success123 said:
try samsung smart switch. it will download the original firmware that came with the phone and flash it for you..
Click to expand...
Click to collapse
How do I do that? Does it require my phone to boot?
as digital tumbleweed passes through
StillLiam said:
As I had said up there I cant boot into recovery mode, whenever I try to my phone just boots into TWRP.
Click to expand...
Click to collapse
Did you see the link? If you can access TWRP you are good. Just follow the guide.
StillLiam said:
How do I do that? Does it require my phone to boot?
Click to expand...
Click to collapse
http://samsungsmartswitch.org/ download it from here. put your phone into download mode and follow the steps
download it from here. put your phone into download mode and follow the steps[/QUOTE said:
I tried using Smart Switch and it didn't recognize my phone. I had tried putting my model number and serial number in on it too in the emergency software thing, didn't recognize it.
Click to expand...
Click to collapse
Shooot. Well id do this if you can still get into twrp you really are safe. Click on twrp and i think under Home advamced. Find the fix file permissions. Do it "JUST IN CASE" .i had this happen to me
Then folllow the post here at this link
Click Me Stock Firmware This worked for me when i was Bricked .No os . No nothing . What do you have to lose
ADB Sideload in worst case
Your last but 100% working hope once executed the right way will be the use of ADB Sideload within TWRP which is your obvious recovery. You will need either a SDcard (not for S6 and Edge), a USB with a direct usb cord, or a PC with USB cord to do this. For PC you will need the ADB SideLoad drivers for your phone model to be installed on your PC. Once installed you can connect your phone via USB to your PC and run the ADB SideLoad executable which will run in a CMD window. I don't know the exact commands anymore, but long story short, you want to push the OS install package (Self-installing OS NOT WITH CUSTOM INSTALL MENU) to your phones internal memory which after you'll need to execute by using TWRP. This i have done myself after i hard bricked my S6 edge the first day i got it. I used (by accident) Nand Erase including every other erase to get it back to work which just only put me to more trouble having me to use ADB SideLoad. I hope this bare information helps you out since i can feel the pain you are going through having to know you may have permanently lost your phone lol... Report back if it helped or if you need any more information regarding ADB SideLoad.
- GhostGurio
Try some other original cable. N try flashing via odin.
Also there sometimes u need to flash with pit file. Not sure though.
I had same problem with my s4. Failing at nand write.
In my case cable thing worked.