Related
I've been looking around online for really low profile cases and noticed that the case mate barely there and the Incipio Feather light are almost the same case (both 6oz, minimal protection, etc.) I want to order one but I'm wondering which one (if either) protects the corners of the device. From the pictures it seems that the top and bottom are not covered. I was just wondering from people who have had experience with these cases, which protects the corners better? And do either of them have a lip over the screen? If you have both then comparison pictures would be very appreciated. Thanks in advance
Sent from my EVO using xda app-developers app
I'm in the same boat as you - I'd like to see a comparison between these two (or a review of either, really).
Best I can tell from their websites/descriptions, neither really covers the top/bottom or corners. From the images, it looks like the Feather kind of tapers flush with the phone at the edges a little better (a little more sleek). The Barely There has holes for a wrist strap/tether/charm thing, if you're looking for that.
The Feather has a few more colors available (black, pink, blue, and grey), but I was able to find the Barely There in three colors (black, white, and pink).
I don't see a whole lot of difference, although you can get the Feather for a bit cheaper from Incipio's website for the remainder of the month with a coupon code (SUM2012 - gives you 20% off, I believe).
I had been fond of the Incipio Feather cases since my Blackberry days... I had bad luck with case mate barely there cases breaking on me. Then I found the Amzer Shellster case and holster combo and I will never go back. more durable and a better feel.
I just got the Incipio feather case in the mail today...I had the diztronic before that. Probably post a review/some pics tomorrow. I really like the feather, brings out the beautiful design of the evo and looks much better than the diztronic. Can't say about the case mate
Sent from my Nexus 7 using XDA Premium HD app
posted some pics here
http://forum.xda-developers.com/showthread.php?p=30477229#post30477229
Thanks for the feedback, I think I'm going to go for the case mate for the raised edges around the screen
Sent from my EVO using xda app-developers app
Save 10 bucks and go with the SGP.
http://www.spigen.com/htc-evo-4g-lte-snap-case-series.html
regalpimpin said:
Save 10 bucks and go with the SGP.
http://www.spigen.com/htc-evo-4g-lte-snap-case-series.html
Click to expand...
Click to collapse
i've had the spigen snap case, and loved it. design and looks just fit perfectly with the phone. only problem was it not sturdy. i think i had it for a week before taking it off to install a new sd card and the case broke. hopefully the feather or the barely there are stronger in quality. these snap cases are awesome though.
nope, never could put this little protection on my evo, I take my LTEVO through too much **** lol
i was looking for a white case like this and bought this, type "White Rubberized Hard Snap-On Case Cover FOR HTC EVO 4G LTE Sprint Accessory" in ebay (sorry cant post links). The case sticks out more than the phone on the bottom but doesnt protect the front corners. The case does not cover the top nor does it stick out more and does not protect the corners. The case sticks out very slightly along the sides of the phone giving it a reallllly slight lip. Does not provide lip for the camera, so the camera stick outs verry little. Its matte white so its a bit slippery.
Black barely there case arrived today. Its great. Slim profile, premium feel. Definitely gets my recommendation.
Sent from my EVO
Can anyone give me some insight on feather/snap on cases. Do they scratch or smudge the chrome/paint on the side or outer edges of the phone from simple every day use. I ordered an incipio feather case for my Samsung galaxy note 3 and I am kinda worried that it will mess up the edges of the phone by having it on.
Just got my bounce case from amazon for 10.00 not bad
Sent from my SAMSUNG-SM-N900A using Tapatalk
Looks good mines on the way right now.
Sent from my SM-N900R4 using Tapatalk
Gotta say this is the best TPU case I've ever used. Even better than Diztronic IMO. When Diztronic releases theirs in a few days I may pick one of those up as well, just for comparisons sake.
Sent from my SM-N900V using Tapatalk
Getting mine later today can't wait
Received mine today and it's a really nice case. It's not quite as snug as the Tudia Melody case (which is pretty nice for the price) so I suspect that one of the thicker screen protectors would like fit nicely and make the case a bit tighter.
The Bounce has a really nice feel to it, although it's quite a bit more slick than the Melody. The Melody has a more supple texture to it around the edges, making it a bit easier to grip.
As far as looks, the Bounce easily beats the Melody. It has very sleek, modern look to it.
Tudia Ultra Slim Melody case: http://www.amazon.com/gp/product/B00F3U7DC0/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
just got mine also, Ordered on the Oct 20 from main company website (to Canada paid premium shipping to guarantee no custom charges). I got combo with glas t slim (not r) and all seems well. I was under the impression that the glas had individual cutouts for sensors and camera but it is a single opening for ear speaker and sensors. No opening for camera. I think I just got confused. Grey bounce with orange button. I really found the phone just way too slim and the beveled edges of the bounce help to fix that. Still I think a monster battery is in my future. Overall nice purchase and better/easier to grab and go. Just put the glas and protector on so haven't used it yet, but just the front lip makes it much nicer to handle. Love the side buttons.
Just got my bounce case, feel very solid and the side buttons are very smartly designed. Highly recommend, they should produce more colors to choose from.
boss336 said:
Just got my bounce case from amazon for 10.00 not bad
Sent from my SAMSUNG-SM-N900A using Tapatalk
Click to expand...
Click to collapse
Looks nice I have the spigen slim armour at the moment , by any chance could you post the sizes of the case with the phone inside? Just would like to know if its any slimmer than my slim armour ^^
Sent from my Galaxy Note 3 SM-N9005 using XDA Premium
Here is my quick review of the new Incipio DualPro Case. First I want to say sorry for the blurry pics. Wasn't taken with the best camera, but I wanted to get this up now.
Right off the bat this case feels great. It's almost gel-like. It's made of a hard shell, and very soft inner part, but both feel the same. It's like a feltish feel. Reminds me of the Nexus One's back. Even though it was hard plastic, it had that soft touch feel to it. The buttons are extremely easy to press thanks to the soft inside material being the cover instead of the hard outer shell, or individual pieces like the Spigen Neo-Hybrid. The overall thickness is also less compared to both the Neo-Hybrid and the Spigen Slim Armor. It almost feels like the naked phone without a case.
The cutouts are spot on too. Just like the Slim Armor. No complaints overall. Again the headphone port has a deep cutout, so you will need an extension, or just use headsets with thin jacks. Anything larger than the headphones that came with it won't fit. The camera is tucked in just enough, so there is no fear of it contacting any surface when put down, and the front is thick enough to protect any sort of surface if laid face down. I'm really happy with this case. For me it's a toss up between the Slim Armor and this with the Neo-Hybrid last. Both the Slim Armor and DualPro feel great in the hand, but the DualPro feels a bit better with the super soft touch feel. Great case that you can't go wrong with. The color is Cyan.
http://www.incipio.com/cases/samsung-smartphone-cases-accessories/samsung-galaxy-note-3-cases.html
More pics.
Even more pics.
bobbyphoenix said:
Even more pics.
Click to expand...
Click to collapse
Thanks for the pictures & review, this may be my kind of case. One question though, how is the gripping on the sides? All I need in a case now is one that provide sufficient grip, since the Note 3 is so thin and slippery on the sides that sometimes it literally slides off my hands/grip.
The grip on the sides Isn't super slick but I wouldn't call it grippy either. I'd try and check it out in a VZW store first hand. My only complaint is the TPU insert doesn't have much rigidity around the home button and the speaker. So it snags and doesn't stay snug so to speak.
I'm probably going to return mine when my Uag arrives
Sent from my SM-N900V using Tapatalk
phiquantu said:
Thanks for the pictures & review, this may be my kind of case. One question though, how is the gripping on the sides? All I need in a case now is one that provide sufficient grip, since the Note 3 is so thin and slippery on the sides that sometimes it literally slides off my hands/grip.
Click to expand...
Click to collapse
This is the only case so far that I'm really having an easy time holding. The Slim Armor was the best I thought, but this one is just a perfect increase in size over the naked phone. The rubbery texture is more than enough to grip. When you first put it on it may feel a bit slippery, but it's just the talcom powder they use in the molds for the silicone to be easy to get out. I wiped mine down, and now it's a soft rubbery grippy feeling case. I really like it a lot. Plus the sides are curved. There are no corners that you need to grip against like the Neo-Hybrid or Slim Armor. It's a very natural feeling to hold it since your fingers wrap the entire case. One bonus feature I found for me is the entire bottom is the very soft inner case, and the way I hold the phone I tend to put my pinky under the bottom as a brace. The soft gel really is easy on my finger. The other two case are hard on the bottom, and I would have to keep moving my pinky to stay comfy.
james_f said:
The grip on the sides Isn't super slick but I wouldn't call it grippy either. I'd try and check it out in a VZW store first hand. My only complaint is the TPU insert doesn't have much rigidity around the home button and the speaker. So it snags and doesn't stay snug so to speak.
I'm probably going to return mine when my Uag arrives
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
That's a good additon to mention. The top and bottom are both just the soft inner case. There is no hard outer shell to keep it pressed against the phone, so if you tend to put it in your pocket I can see it getting caught and pulled when you try to pull it out, but overall with it being on the case and used, it doesn't "wobble or flipflop" by itself. It's stiff enough to stay put, but easy enough to pull away with a slight tug.
Ah yeah I wasn't clear. It stays put until it snags coming in and out of my pocket. It's merely an annoyance.
My favorite thing about the case is how comfortable it is. Holding the phone naked now feels sharp and uncomfortable.
Sent from my SM-N900V using Tapatalk
Looks great!! Thanks for the review and your initial thoughts on it! Looks really good on your white GN3! I also bought a white GN3, so this is perfect for keying me know how this will look on mine! Thank you!!
One thing, you should put a link in the OP so readers can easily find this case, instead of having to search the web for it. Other than that, which you can easily fix with an edit, excellent review!
Sent from my White Sprint Note 3 via XDA Premium
stanglifemike said:
Looks great!! Thanks for the review and your initial thoughts on it! Looks really good on your white GN3! I also bought a white GN3, so this is perfect for keying me know how this will look on mine! Thank you!!
One thing, you should put a link in the OP so readers can easily find this case, instead of having to search the web for it. Other than that, which you can easily fix with an edit, excellent review!
Sent from my White Sprint Note 3 via XDA Premium
Click to expand...
Click to collapse
Link added to OP.
How'd you get your case so quickly? I pre-ordered directly from incipio.com about 2 weeks ago and still haven't received a shipping notice.
EDIT: Oh, apparently the blue and pink versions are shipping NOW, but the neutral white and black versions are taking a little longer. Ah well.
zmore said:
How'd you get your case so quickly? I pre-ordered directly from incipio.com about 2 weeks ago and still haven't received a shipping notice.
EDIT: Oh, apparently the blue and pink versions are shipping NOW, but the neutral white and black versions are taking a little longer. Ah well.
Click to expand...
Click to collapse
I'm special. LOL Yeah just as your edit said. I check sites daily, and when I see them in stock I order ASAP. That's how I get all my case in before everyone. I check first thing in the morning (around 8). I find I can order in the morning with "in stock" stuff, and by afternoon they are already out of stock.
I picked up my black case at a Verizon corporate store
Sent from my SM-N900V using Tapatalk
I picked up a DualPro SHINE, Brushed silver color, from the Verizon store, They were able to pick up the day note3 came out. They still sell them, It's a the best over the counter case you can get IMHO at the moment.
How does this case compare to the spigen bounce? I just ordered the bounce to try it out.
I loved this case on my SG4 but it was a Lint & Dust magnent. I think there is a correlation with most cases....the grippier the case...the more dust and lint it will attract. Just got a UAG case for my new note 3 and it sits perfectly inbetween Grip and Lint spectrum!
Just ordered mine from amazon. How easy / not easy is it to quickly take off and put back on? Like if I wanted to swap batteries in my phone, would it be this whole ordeal? Thanks
Sent from my DROID RAZR using xda premium
It's very easy. One of the best cases if you need to do that. When it's on it's on good, but no fear of breaking something if you have to take it off.
Sent from a Galaxy Note 3 far, far away....
My older brother had the Shine version of the Incipio DualPro for his Galaxy Note II and it was pretty bulky with no easy way to take it off. I have the Spigen Slim Armor for my Galaxy Note 3 and considered it superior until I noticed a crack in the armor yesterday. It has never been dropped so I am pretty sure that it was caused by taking the phone in and out daily. I do this carefully one side at a time and push through from behind (camera opening) but it happened anyway. I would hope that the Note 3 version of the DualPro is easier.
Also, it was rounded so it probably wouldn't fit a flat metallic plate insert like the nGroove Snap uses. He also tried it with a Qi wireless receiver I sent him and it doesn't work through the case. I hope the Note 3 version is thinner.
Sent from my SM-N900T using Tapatalk
I got 5 difference cases so far for my 6. I had an Incipio Feather on my G2 and it was slim and grippy with good protection. I wanted to find something similar with minimal bulk because the phone is pretty massive already.
I got these:
Update: Gallery with 3 more cases
http://imgur.com/a/7qxVn
Update: Youtube video with grip tests
https://www.youtube.com/watch?v=vjYrq1Ytyyo
Bear motion
https://www.amazon.com/gp/product/B00P22CILU/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Tudia Ultra Slim
https://www.amazon.com/gp/product/B00OMMLLF0/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Ringke Slim
https://www.amazon.com/gp/product/B00O1531YC/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1
LK S Shape Slim
https://www.amazon.com/gp/product/B00OIZIPVY/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1
Spigen Thin Fit
https://www.amazon.com/gp/product/B00OH4HSFK/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1
Orzly Exec-Armour
https://www.amazon.com/gp/product/B00P12CPE6/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
The phone is pretty big and slick on it's own as most of you know. I want something with a good grip that won't slide around easy and offers reasonable corner protection.
The grippiest by far is the Bear Motion. No contest on this one, it will not slip from your hand or surface. The only issue I have is it covers the sides really well, but the corners seem very exposed if you drop the phone at an angle.
The Tudia and the LK both had some grippy spots that were really nice (the clear parts of the case, the translucent was pretty slick), but overall they were not very great at all. While these rubbery cases would probably offer great protection all around, I really didn't like that they weren't all grippy, and the button covering bothered me. I found it hard to hit the buttons and tell which was which.
The Ringke case is very low profile. It also is around the entire phone making it very secure. I am sure it offers very good protection but it is not any grippier than the uncased phone, it might even be more slick and lead to more drops for me. It is also the only case I had a hard time removing the phone from, and I dropped my phone onto my tile counter getting it out of the case.
The Spigen case is great shape for me. It might be slightly thicker than the Ringke case overall, but not noticeable really. It is mostly open on the top and bottom, which I like a lot. Unfortunately it is pretty slick also and I don't like that one bit.
Based on my last case for my G2, I drop my phone on the corners a lot. I have attached a picture of the corners from my old case to show the damage, but the case probably saved my old screen.
I really like the Spigen case size and shape. I really dislike how slick it is. If I could combine it with the grip of the Bear Motion, that would be my ideal case. The plastic cases are fine, and the LK has some grip on the back for 25% of it, but I really dislike the button covers. I think I am going to have to go with the Ringke at the moment because it offers the most protection from falls (I hope). Since both it and the Spigen are slick and I will probably drop them, I want that extra coverage. Maybe I can find a way to rough it up a bit as well. I am hoping Incipio makes a nice soft touch case for the phone soon, as I will snatch that up right away.
I am going to give them all some time in the drivers seat though, because I am not sure what will work out best. Will I drop the phone less because of the Bear Motion grip, meaning that it would be better even though the corners are exposed? Only time will tell, but the floors in my house are tile and I hope to keep my glass in a non-cracked condition.
UPDATE: More pictures, cases and video
I talked a lot about grippiness of cases in that, and I didn't have the Soft Feel versions of the Ringke or Spigen. I got those and I also got an Orzly case as well.
I put all the cases on a fairly slick book and raised the book until they fell so you could get an idea of each case's mu. You can tell how grippy the cases are by watching how fast they slide and at what angle they start sliding.
The Soft feel versions of the Ringke and Spigen are way better to hold than the other variations for me. As you can tell from the video they are vast improvements on their slick counterparts for grip.
The Orzly was pretty comparable to those cases. It feels a little grippier in hand, and has reasonable corner protection for me. I also like that it comes in colors with grip instead of just black, which I am not too fond of. It is the only case that just has a cutout with no protection around the front of the buttons. I also kind of like that as nothing gets in the way of button pressing for volume and power.
As you see from the video, the Bear Motion is by far the grippiest, but it seems fatter than most and offers the worst corner protection
Great to see all these other cases. I got the Bear Motion in black due to my previous experiences with them, and I love mine. I wasn't so worried about drop protection as I was grip. If the phone weren't so dang slippery I wouldn't have a case at all . The Bear Motion cured that for me of course, and I like how it fits tight and smooth with no wiggle or creaking. Perfect for my needs
Great post. I'm patiently waiting delivery of my Bear Motion and SF Black Ringke slim cases.
I see you got the gun metal ringke slim. It is as slippery as the phone itself indeed. So is the white one. I just got the black SF one and it is totally different. Grippy, although I don't know how it compares in grippyness to a bear motion. The SF black ringke slim is exactly like the Nexus 5 black back. Thanks for sharing your pics!
jbdan said:
I see you got the gun metal ringke slim. It is as slippery as the phone itself indeed. So is the white one. I just got the black SF one and it is totally different. Grippy, although I don't know how it compares in grippyness to a bear motion. The SF black ringke slim is exactly like the Nexus 5 black back. Thanks for sharing your pics!
Click to expand...
Click to collapse
I have the SF Black ordered, it will be here Friday. I want that grip.
Is it still easy to press the buttons with the Bear Motion on? I had one for my MotoX and I couldn't stand how difficult it was to press the buttons given the lip.
You should try Orzly® - Exec-Armour. I order a white Exec it is grippy but I think the corner protection and could be better so that is where Ringke SF could come in. Here is the link for the Orly http://www.amazon.com/gp/product/B00P12CNFW/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
I have a TUDIA I really like it. The buttons are easy to distinguish for me because of the gape between the power and volume rockers. I bought a clear one and since I also have some Cruzerlite cases I still say it's nice to have another solid TPU case. The addition of the button covers built into the case is why I bought this case and its better than I expected.
I'm going to buy s black one once its available with amazon prime.
Ringke-SLIM
Flexislim
are my top pick when I will buy a case
rustid said:
The Ringke case is very low profile. It also is around the entire phone making it very secure. I am sure it offers very good protection but it is not any grippier than the uncased phone, it might even be more slick and lead to more drops for me. It is also the only case I had a hard time removing the phone from, and I dropped my phone onto my tile counter getting it out of the case.
Edit: I ordered the SF Black Ringke, as it is supposedly pretty grippy. It won't be here until Friday, but I will update with pictures and opinion when I get it.
Click to expand...
Click to collapse
I noticed you have the black Ringke Slim in the pictures. It's smooth like the other colors, not very grippy? I ask due to hearing from other sources saying it has more texture. Looks smooth to me.
When you say SF Black Ringke, do you mean the Ringke Fusion?
Thank you for the pictures and info. :good:
Andromjb said:
I noticed you have the black Ringke Slim in the pictures. It's smooth like the other colors, not very grippy? I ask due to hearing from other sources saying it has more texture. Looks smooth to me.
When you say SF Black Ringke, do you mean the Ringke Fusion?
Thank you for the pictures and info. :good:
Click to expand...
Click to collapse
The "black" Ringke in OP is actually gunmetal, it is actually the Amazon link listed in the OP. The SF Black is the same case, but black with SF (Soft Feel perhaps?), it is also in the Amazon link but as another color. The other colors don't have the soft touch, and are apparently more slippery due to this. I only have the SF Black, so I can't comment on the others.
cupfulloflol said:
The "black" Ringke in OP is actually gunmetal, it is actually the Amazon link listed in the OP. The SF Black is the same case, but black with SF (Soft Feel perhaps?), it is also in the Amazon link but as another color. The other colors don't have the soft touch, and are apparently more slippery due to this. I only have the SF Black, so I can't comment on the others.
Click to expand...
Click to collapse
So it is in fact soft? Has texture for some grip?
I have a white slim right now. I like it, but it is smooth and slick. I'm interested in the black if it has added grip.
Clarkkent434 said:
You should try Orzly® - Exec-Armour. I order a white Exec it is grippy but I think the corner protection and could be better so that is where Ringke SF could come in. Here is the link for the Orly http://www.amazon.com/gp/product/B00P12CNFW/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
I ordered one, I will take pictures tomorrow when it comes in.
natezire71 said:
Is it still easy to press the buttons with the Bear Motion on? I had one for my MotoX and I couldn't stand how difficult it was to press the buttons given the lip.
Click to expand...
Click to collapse
I think it is easier than the MotoX. I have used a 2013 X with a bear motion case and I found it easier than that, but it is still slightly thicker than the Spigen and Ringke so that might make it a little more difficult.
Andromjb said:
I noticed you have the black Ringke Slim in the pictures. It's smooth like the other colors, not very grippy? I ask due to hearing from other sources saying it has more texture. Looks smooth to me.
When you say SF Black Ringke, do you mean the Ringke Fusion?
Thank you for the pictures and info. :good:
Click to expand...
Click to collapse
I purchased the Gunmetal. I learned that was soft feel and it is only the SF black that has that property.
cupfulloflol said:
The "black" Ringke in OP is actually gunmetal, it is actually the Amazon link listed in the OP. The SF Black is the same case, but black with SF (Soft Feel perhaps?), it is also in the Amazon link but as another color. The other colors don't have the soft touch, and are apparently more slippery due to this. I only have the SF Black, so I can't comment on the others.
Click to expand...
Click to collapse
This is correct, I thought the Gunmetal looked like the black, and didn't realize there was a difference in texture when I ordered.
All the ringke slims EXCEPT for the "SF Black" model are the same material. Slick slippery plastic almost identical to the Nexus 6 native back. The SF Black is soft touch/softfeel exactly like the native back of the black Nexus 5. That being said, all the ringke slim models are very nice cases, the best IMO as far as minimal and solid build.
Spigen thin black is nice... Adds grip without girth. And for a general bump protector its good. But lacks good corner protection from drop, and if you screen down on a table, without a screen protector, the glass is flush with the case and screen damage can happen...
rustid said:
I think it is easier than the MotoX. I have used a 2013 X with a bear motion case and I found it easier than that, but it is still slightly thicker than the Spigen and Ringke so that might make it a little more difficult.
Click to expand...
Click to collapse
So, comparing it to the Ringke, which is easier to press buttons?
natezire71 said:
So, comparing it to the Ringke, which is easier to press buttons?
Click to expand...
Click to collapse
Ringke, hands down. But Bear Motion is not hard for me to press by any means.
For me quicksand style cases are the best. In not typically a phone dropper so coverage is less important than grip. The bear motion cases are great. Super slim and super grippy.
natezire71 said:
So, comparing it to the Ringke, which is easier to press buttons?
Click to expand...
Click to collapse
Most Ringke cases have exposed buttons, so they are easily accessible. I love their designs. You can check my gallery here if you want to see the power and volume rockers up close.
Andromjb said:
Most Ringke cases have exposed buttons, so they are easily accessible. I love their designs. You can check my gallery here if you want to see the power and volume rockers up close.
Click to expand...
Click to collapse
I have a Ringke Slim Crystal. I don't care for the clear look, so I'm going to return it. However, I like the Bear Motion cases--but am concerned for how easy/difficult it is to press the buttons, given my previous experience with the MotoX's version.
Hey guys gals im having a hard time deciding on what case to use with my limited edition blue pixel XL. I'm steering towards clear TPU or even Google's clear Snap-on.
Would you mind posting pictures of what use on yours?
Thanks!
http://forum.xda-developers.com/pix...el-xl-case-t3491845/post69410013#post69410013
Ordered a slickwraps distressed tan leather back, probably wont install it.
Bear motion gray, save it for later.
Goospery Yellow tpu, once the blue back novelty fades.
Nillkin brown and gray. This will be my main. Brown is like an already yellow clear tpu
Atleast 7 clear ultra think slim (yea right) clear tpu..
Xtemeguard full body skin, will most probably install the back, as these phones get scratched looking at them..
clockcycle said:
Xtemeguard full body skin, will most probably install the back, as these phones get scratched looking at them..
Click to expand...
Click to collapse
How do do slickwraps naked matte compare to xtremeguard back protector. Anyone has any experience?
Thanks in advance.
I've went through:
Slickwraps naked glossy
Slickwraps naked matte
Rhinoshield Bumper
Cimo Clear Case
Spigen Clear case
The slickwraps are very difficult to install, suggests using their video (which doesn't exist, by the way; they have install videos for other devices, none for the pixel) and I couldn't deal with it. Material felt pretty decent, would recommend the matte over glossy.
Cimo is good, like the large single cutout on the back for camera / sensors. Doesn't have the beveled edges of the Spigen.
Spigen is also decent, feels better in the hand than the Cimo because of the edges, but it's already yellowing around the inside edges after 2 weeks.
Rhinoshield is currently my favorite. It definitely adds a good bit of width to the phone, but at least the blue isn't hidden or dulled.
Not super pleased with the clear cases to be honest, the blue is quite dull through the clear TPU.
Have a Caseology Waterfall on order, should be here tomorrow. Considering ordering the Nillkin Clear and maybe a couple other clear <$10 cases off amazon until I find one that I don't think dulls the blue so much.
I'm using the red shield clear TPU the one that's open cut out for the sensor camera LED section it's really nice doesn't add Too Much bulk to the phone still much too thick for my liking and when it's brand new it's a little slippery
I use it til my orders get delivered
I used the Spigen Liquid Crystal for a few weeks but I could tell that it was starting to yellow. Felt great though. Using the Ringke Fusion right now (smoke borders) and that looks pretty decent and still shows off the blue back.
Caseology Waterfall came in. Definitely my favorite of the clear cases. It's quite grippy compared to the Cimo and Spigen. Cutouts are good (one long cutout by the back camera so no focus issues).
Still dulls the blue a little, but I'm resigned to the fact that all of them will do that. Probably going to stop looking for cases now.
remedy1419 said:
Caseology Waterfall came in. Definitely my favorite of the clear cases. It's quite grippy compared to the Cimo and Spigen. Cutouts are good (one long cutout by the back camera so no focus issues).
Still dulls the blue a little, but I'm resigned to the fact that all of them will do that. Probably going to stop looking for cases now.
Click to expand...
Click to collapse
Got pictures?
It's definitely hard to choose a clear case which can protect the phone while falling down to the ground.
So an issue was brought to my attention yesterday, my current clear case has two cut outs for cam and led, when using the flash taking pictures it crates a a halo glare on the photos.
I remedied this by cutting the center between the led and cam and no longer interferes.
clockcycle said:
Got pictures?
Click to expand...
Click to collapse
Sorry, got a bit busy.
Potato quality pictures, but all I have is an old S5. The corner shot with those 3 bumper edges are on every corner, not sure if it's for grip on the phone or drop protection. Cutouts are all really nice.
The buttons are really great, better than all the other cases I have. Fit right on and are very clicky. Kind of like diztronic buttons if you've ever had their TPU cases.
It's more rigid than the Spigen liquid crystal, probably more in line with the Ultra hybrid. It's bendy still, not a hard case, but stronger feeling than the liquid crystal I have. Wouldn't worry about any regular, non-extreme case drops with the case on. Feels really solid.
There is a little edge along the back where it has that little cutout curve by the rear glass and then goes down as a rectangle along the bottom and edges. It's kind of like a plastic seam. It could bug some people, but I grip my phone by the edges so never really feel it.
Bear Motion, in Gray
Generic Ultra Slim Thin Clear TPU from eBay 0.8mm thick
Slickwraps Natural Series Distressed Tan Leather
Generic Clear Hard PC SnapOn back protector
It seems that Ringke FUSION is a good option for real blue, clear back with bumper protect, isn't it