today i download and install omega v16 jb 4.1.2. its automatically erase my siyah kernel and install philz kernel, now i try to flash my mobile with latest siyah kernel cwm zip by install zip in philz cwm but its not flashing. can some one help me out how to install dual boot using omega v16 jb 4.1.2 rom
appumohanty said:
today i download and install omega v16 jb 4.1.2. its automatically erase my siyah kernel and install philz kernel, now i try to flush my mobile with latest siyah kernel cwm zip by install zip in philz cwm but its not flushing. can some one help me out how to install dual boot using omega v16 jb 4.1.2 rom
Click to expand...
Click to collapse
What do you mean by 'it's not flashing'? You selected Install zip from sd-card and then what happened?
Sent from the Matrix
Donnie Sins said:
What do you mean by 'it's not flashing'? You selected Install zip from sd-card and then what happened?
Sent from the Matrix
Click to expand...
Click to collapse
ya i select install zip , then choose zip from sd card then siyah 5.01 cwm zip, its starting installation but suddenly its exiting flashing,
Flash with Odin in Download mode.
And you can't flush a kernel, but you can flush a toilet.
Sent from my GT-I9100
appumohanty said:
ya i select install zip , then choose zip from sd card then siyah 5.01 cwm zip, its starting installation but suddenly its exiting flashing,
Click to expand...
Click to collapse
Maybe you have a corrupted downloadfile, so you
have to download the kernel again.
boki9999 said:
Flash with Odin in Download mode.
And you can't flush a kernel, but you can flush a toilet.
Sent from my GT-I9100
Click to expand...
Click to collapse
^^
But it should be possible through CWM...
Sent from the Matrix
Donnie Sins said:
Maybe you have a corrupted downloadfile, so you
have to download the kernel again.
i try with this file before, its was working with other kernel after installing philz kernel its not working, omega by default install philz kernel and after installation siyah is not flashing,
^^
But it should be possible through CWM...
Sent from the Matrix
Click to expand...
Click to collapse
i try with this file before, its was working with other kernel after installing philz kernel its not working, omega by default install philz kernel and after installation siyah is not fashing,
appumohanty said:
i try with this file before, its was working with other kernel after installing philz kernel its not working, omega by default install philz kernel and after installation siyah is not fashing,
Click to expand...
Click to collapse
have you tried flashing in download mode with odin?
boki9999 said:
have you tried flashing in download mode with odin?
Click to expand...
Click to collapse
no i will try it now and will let you know
finally able to flash siyah kernel but omega v14 not running, its doesn't support .
appumohanty said:
finally able to flash siyah kernel but omega v14 not running, its doesn't support .
Click to expand...
Click to collapse
Did you flash Siyah 5.0i?
boki9999 said:
Did you flash Siyah 5.0i?
Click to expand...
Click to collapse
i flash with latest 5.0.1, but i am getting black screen after after kernel booting,
I have the same problem. And I don't have odin.
How can I go back to Siyah from the 4.1.2 JB leak with philz kernel ?
the omega does not start because the siyah is not compatible with the new leak 4.1.2 LJS .... there aren't still compatible kernel ... You need to reinstall the kernel Philzo to go back
alister91 said:
the omega does not start because the siyah is not compatible with the new leak 4.1.2 LJS .... there aren't still compatible kernel ... You need to reinstall the kernel Philzo to go back
Click to expand...
Click to collapse
same thing i try lot, to go back siyah from philz and when ever i try to flash siyah kernel 5.0i its shows some wrong message so what i did i flash with siyah 4.0.1 link for download it http://downloadandroidrom.com/file/GalaxyS2/kernels/ICS/SiyahJBICS/Siyah-s2-v4.0.1-CWM.zip
download this kernel and i am sure it can be flash by philz kernel. once flash over its restart and your mobile stuck on siyah logo, downt worry remove your batter and boot in to siyah recovery and reload other rom, be sure to save rom to your memory card other wise in siyah recovery you can go for mount usb and copy rom. i think this will help you lot
den_breacker said:
I have the same problem. And I don't have odin.
How can I go back to Siyah from the 4.1.2 JB leak with philz kernel ?
Click to expand...
Click to collapse
same thing i try lot, to go back siyah from philz and when ever i try to flash siyah kernel 5.0i its shows some wrong message so what i did i flash with siyah 4.0.1 link for download it http://downloadandroidrom.com/file/GalaxyS2/kernels/ICS/SiyahJBICS/Siyah-s2-v4.0.1-CWM.zip
download this kernel and i am sure it can be flash by philz kernel. once flash over its restart and your mobile stuck on siyah logo, downt worry remove your batter and boot in to siyah recovery and reload other rom, be sure to save rom to your memory card other wise in siyah recovery you can go for mount usb and copy rom. i think this will help you lot
1. Siyah Kernal Odin version : Flash via Odin ( http://d-h.st/Bcf )
2. Enter into Siyah recovery and flash a compatibale ROM.
Done.
If you havent got a rom on your micro SD card
a) In siyah kernal mount USB storage.
b) Use an micro-sd reader to copy flashable zip
den_breacker said:
I have the same problem. And I don't have odin.
How can I go back to Siyah from the 4.1.2 JB leak with philz kernel ?
Click to expand...
Click to collapse
Currently siyah doesn't support leaked jb.. So stay with Phil kernal...
You can try latest Dori kernal... Dual boot with omega... Rom my frnd using that...
Sent from my GT-I9100 using xda premium
xDa_nightfury said:
Currently siyah doesn't support leaked jb.. So stay with Phil kernal...
You can try latest Dori kernal... Dual boot with omega... Rom my frnd using that...
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
unfortunately even dorimanx works .... you have to wait
appumohanty said:
today i download and install omega v16 jb 4.1.2. its automatically erase my siyah kernel and install philz kernel, now i try to flash my mobile with latest siyah kernel cwm zip by install zip in philz cwm but its not flashing. can some one help me out how to install dual boot using omega v16 jb 4.1.2 rom
Click to expand...
Click to collapse
http://db.tt/YceTd0pl flash a kernel cleaning script before you flash a new kernel
---------- Post added at 02:29 PM ---------- Previous post was at 02:25 PM ----------
den_breacker said:
I have the same problem. And I don't have odin.
How can I go back to Siyah from the 4.1.2 JB leak with philz kernel ?
Click to expand...
Click to collapse
Siyah,Dorimanx kernel does not have a support yet in jb leaked xxlsj, but for sure they are working with it now..
Thanks A Lot
appumohanty said:
same thing i try lot, to go back siyah from philz and when ever i try to flash siyah kernel 5.0i its shows some wrong message so what i did i flash with siyah 4.0.1 link for download it download this kernel and i am sure it can be flash by philz kernel. once flash over its restart and your mobile stuck on siyah logo, downt worry remove your batter and boot in to siyah recovery and reload other rom, be sure to save rom to your memory card other wise in siyah recovery you can go for mount usb and copy rom. i think this will help you lot
Click to expand...
Click to collapse
Thanks a lot man....had been searching around a lot for this...didnt wanna use odin... so was looking for a compatible siyah kernel...your post helped a lot....many thanks...
Hey guys,
I have just need some help.
I got a s2 4.0.4 (no root) and would like to install the disaster custom rom.
Because i have 4.0.4 and can brick my phone i need some helps/tips..
So as i understand i need cwm to flash the custom rom.
To get cwm i need root. Well, which root methode should i use?
I want one with cwm and supersu in it.
Oh, and after i have root on the 4.0.4 and flash the 4.1.2 custom rom do i keep my root?
HAKANN said:
Hey guys,
I have just need some help.
I got a s2 4.0.4 (no root) and would like to install the disaster custom rom.
Because i have 4.0.4 and can brick my phone i need some helps/tips..
So as i understand i need cwm to flash the custom rom.
To get cwm i need root. Well, which root methode should i use?
I want one with cwm and supersu in it.
Oh, and after i have root on the 4.0.4 and flash the 4.1.2 custom rom do i keep my root?
Click to expand...
Click to collapse
Just dwnld the 'Siyah kernel v4.1.5 or v5.0.1' (tar file for ODIN) and flash the same thro 'Odin' on ur pc.
It will automatically Root ur phone and install 'SuperSu' and latest CWM recovery for u.
then using the cwm recovery of siyah kernel u can flash any custom rom of ur choice.
after flashing the custom rom based on 4.1.2 u wont loose ur root
ps- once u install custom kernel like siyah ur phone will be safe from the 'Brick Bug' issue for sure
Flashed the Siyah Kernel.
About to flash custom rom
but got one finally question.
The custom rom; http://forum.xda-developers.com/showthread.php?t=1498017
Says it has philz kernel or whatever
so can i still flash it? and does it change my kernel?
Does it have a effect on me?
HAKANN said:
Flashed the Siyah Kernel.
About to flash custom rom
but got one finally question.
The custom rom; http://forum.xda-developers.com/showthread.php?t=1498017
Says it has philz kernel or whatever
so can i still flash it? and does it change my kernel?
Does it have a effect on me?
Click to expand...
Click to collapse
Yes, u can flash it and the Kernel (philz) that comes with that rom will replace ur Siyah kernel for sure but u wont loose ur root
it will not have any effect on u though
do follow the install instruction for a successfull flash of the rom.
Cheers!!
Thanks, it works!!
I used this thread http://forum.xda-developers.com/showthread.php?p=37149820 to root, but now I need CWM, I have stock recovery. So if someone could point me to CWM to flash over this or with this, I can't find it.
Thanks.
This question has appeared about a million times in forums.. Use the browser of the forum and you will find your answer easily.
sirkula said:
I used this thread http://forum.xda-developers.com/showthread.php?p=37149820 to root, but now I need CWM, I have stock recovery. So if someone could point me to CWM to flash over this or with this, I can't find it.
Thanks.
Click to expand...
Click to collapse
You had no need to follow that guide, its bollocks and is only needed if you want to use stock recovery.
Instead just simply flash Siyah kernel v6 beta4 via ODIN and then that will give you root, cwm, super user and good stable kernel.
Flash siyah you will get amazing features like dual Booting, overclocking and advanced cwm
http://gokhanmoral.com
Or if you want original version then
http://www.clockworkmod.com/rommanager
Sent from my iPhone using Tapatalk
TheATHEiST said:
Instead just simply flash Siyah kernel v6 beta4 via ODIN and then that will give you root, cwm, super user and good stable kernel.
Click to expand...
Click to collapse
Can I flash Siyah over this root that I have already? And must I use Odin or can I use stock recovery to flash (ZIP (For CWM-based Recovery))?
Sent from my GT-I9100 using Tapatalk 2
I have exactly the same problem.
First I tried flashing Philz kernel. But after flashing I was stuck in the boot screen. So I tried flashing Siyah (stable, not beta), but after the blinking Siyah logo at startup the phone just turned off. Only way out, wiping data/factory reset.
So I went back to 4.0.3 and then reflashed stock 4.1.2 and rooted with the method posted by the OP.
I would really prefer to flash Siyah. But I don't want to wipe... Any suggestions?
Thanks.
sirkula said:
Can I flash Siyah over this root that I have already? And must I use Odin or can I use stock recovery to flash (ZIP (For CWM-based Recovery))?
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
You can Flash siyah over your existing root... Use odin to flash
Sent from my iPhone using Tapatalk
Well, I could flash Siyah beta4. I guess there was some problem with the stable version...
Omaxe said:
Or if you want original version then
http://www.clockworkmod.com/rommanager
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
^^^ Ignore that. Rom manager is not properley compatible with I9100 and using it to flash kernels with result in unbootable system and having to manually flash kernel again via ODIN.
Just flash Siyah v6 beta 4 via ODIN.
Hi guys, i'm on on this rom http://forum.xda-developers.com/show....php?t=1847600 with jeboo kernel, but i want the touch recovery, so i have to flash this http://forum.xda-developers.com/showthread.php?t=1877270
But the question is, can i have the touch recovery and jeboo kernel together?
Wanna have 2 kernels on your device???
flash philz, it's got touch recovery.
Sent from the little guy
Am a beginer in this awesome flashing world,so trying to understand the basics...
Recently I rooted my phone (I9100) and installed Philz touch based CWM but after flashing a custom ROM the CWM was changed to
non touch ,so my question is does a ROM installs its own CWM along with its kernel overwriting
the exisiting CWM on my phone?
Is there any way to keep the Philz touch based CWM after flashing the ROM
Hello and welcome.
Yes, it may be that each rom installs its own kernel along with CWM.
And yes, you can download the philz touch version from XDA and flash it using Recovery. Just search for it in the forum.
Squaredot said:
Hello and welcome.
Yes, it may be that each rom installs its own kernel along with CWM.
And yes, you can download the philz touch version from XDA and flash it using Recovery. Just search for it in the forum.
Click to expand...
Click to collapse
ok thanks a lot for your reply....
Yes each rom has its only recovery be it cwm or twrp and don't flash philz on a custom rom. Philz is for stock based roms only.