Related
Okay, so I'm in a bit of a bind. I'm S-OFF, and I tried updating to the global leak and it seems I've lost boot and recovery. Everytime I boot it goes through the splash screen and then a black screen with the phone and green update symbol, then it turns to a red triangle and exclamation mark. any help would be greatly appreciated. I'm fairly experienced and everything i've tried has failed. I tried going into hboot and flashing the PH98IMG again. It took, but still the same result. I tried flashing the recovery in fastboot but it continues to fail, and I also tried flashing my boot.img but it also failed. Any ideas?
tomtripp21 said:
Okay, so I'm in a bit of a bind. I'm S-OFF, and I tried updating to the global leak and it seems I've lost boot and recovery. Everytime I boot it goes through the splash screen and then a black screen with the phone and green update symbol, then it turns to a red triangle and exclamation mark. any help would be greatly appreciated. I'm fairly experienced and everything i've tried has failed. I tried going into hboot and flashing the PH98IMG again. It took, but still the same result. I tried flashing the recovery in fastboot but it continues to fail, and I also tried flashing my boot.img but it also failed. Any ideas?
Click to expand...
Click to collapse
unlock the bootloader and flash a recovery. you need to unlock since you dont have eng commands.
btw this belongs in q&a
antp121 said:
unlock the bootloader and flash a recovery. you need to unlock since you dont have eng commands.
btw this belongs in q&a
Click to expand...
Click to collapse
Thanks I'll give that a try. Will the firmware and ROM still be in place? Will I have do the update again? BTW Sorry for posting it in the wrong section..
tomtripp21 said:
Thanks I'll give that a try. Will the firmware and ROM still be in place? Will I have do the update again? BTW Sorry for posting it in the wrong section..
Click to expand...
Click to collapse
Its OK. And once you unlock, it'll reboot. Then you just go back into the boot loader and flash a recovery with fast boot.
Sent from my aokp_tenderloin using Tapatalk 2
So got the recovery flashed, but now it only boots into the recovery.
tomtripp21 said:
So got the recovery flashed, but now it only boots into the recovery.
Click to expand...
Click to collapse
Did you try flashig a rom?
Sent from my aokp_tenderloin using Tapatalk 2
i tried to restore my backup that didn't work, I haven't tried a new ROM yet. I'll try that and get back to you. Thanks again for all your help.
antp121 said:
Did you try flashig a rom?
Sent from my aokp_tenderloin using Tapatalk 2
Click to expand...
Click to collapse
Tried flashing a ROM, the stock deodexed rooted 4.03.605.02. Still boots to recovery...
tomtripp21 said:
Tried flashing a ROM, the stock deodexed rooted 4.03.605.02. Still boots to recovery...
Click to expand...
Click to collapse
You need to use interface to fastboot boot.img then run firmware update for old firmware n old CWR. BASICALLY GO BACK TO STOCK REZOUND N START THE WHOLE PROCESS OVER LIKE DAY 1!
Good news is you don't need to do the wire trick again. Your phone crashed during the firmware upgrade now its stuck in limbo n doesn't know how to handle the 2 sets of hardware commands its receiving from the CMOS.
[Q] Can only get into recovery after attempting Juopunutbear S-OFF
I wanted to S-OFF after being stock locked, with the OTA ICS update. I performed HTC dev unlock successfully. After that, I may have gone wrong during one of several steps.
-Pushed AmonRa recovery 3.15 to my phone (seemed to be successful)
-Flashed ICE-EnableRoot.img (got an error message saying it was unsuccessful, but when I rebooted my phone, SuperUser was installed).
-Flashed vigorOTAStockRooted.zip (because I wanted to try the S-OFF method from stock GB rom)
-Ran HTC Rezound S-OFF Kit By Hasoon2000
-Made sure HTC Drivers were installed
-Enabled USB Debugging
-Put in blank SD Card
-Run Juopunutbear v.6 If You Are On Gingerbread
After running Juopunutbear v.6 for Gingerbread, my phone screen went blank and HTC's splash screen came up momentarily, and then my phone screen went dark. The cmd box that popped up then gave me an error message saying I had to install the HTC Drivers. I went to HTC's website to download the drivers. When I tried to install them, I was told they were already installed.
I can reboot my phone into Hboot and AmonRa recovery and I can do anything from there. But when I try to start my phone, I get the HTC splash screen and then black screen. The orange LED lights up when my phone is powered off and plugged in via USB. When I try to boot from Hboot, I either get a static HTC splash screen or splash screen going to a black screen.
This is what my Hboot screen reads:
*** TAMPERED ***
*** UNLOCKED ***
VIGOR PVT SHIP S-ON RL
HBOOT-2.25.0000
RADIO-1.22.10.0421r/1.22.10.0424r
Open DSP-v13.6.0.7611.00.0104
eMMC-boot
Apr 12 2012,16:47:46
Any advise would be greatly appreciated! Thank you!
jtayag said:
I wanted to S-OFF after being stock locked, with the OTA ICS update. I performed HTC dev unlock successfully. After that, I may have gone wrong during one of several steps.
-Pushed AmonRa recovery 3.15 to my phone (seemed to be successful)
-Flashed ICE-EnableRoot.img (got an error message saying it was unsuccessful, but when I rebooted my phone, SuperUser was installed).
-Flashed vigorOTAStockRooted.zip (because I wanted to try the S-OFF method from stock GB rom)
-Ran HTC Rezound S-OFF Kit By Hasoon2000
-Made sure HTC Drivers were installed
-Enabled USB Debugging
-Put in blank SD Card
-Run Juopunutbear v.6 If You Are On Gingerbread
After running Juopunutbear v.6 for Gingerbread, my phone screen went blank and HTC's splash screen came up momentarily, and then my phone screen went dark. The cmd box that popped up then gave me an error message saying I had to install the HTC Drivers. I went to HTC's website to download the drivers. When I tried to install them, I was told they were already installed.
I can reboot my phone into Hboot and AmonRa recovery and I can do anything from there. But when I try to start my phone, I get the HTC splash screen and then black screen. The orange LED lights up when my phone is powered off and plugged in via USB. When I try to boot from Hboot, I either get a static HTC splash screen or splash screen going to a black screen.
This is what my Hboot screen reads:
*** TAMPERED ***
*** UNLOCKED ***
VIGOR PVT SHIP S-ON RL
HBOOT-2.25.0000
RADIO-1.22.10.0421r/1.22.10.0424r
Open DSP-v13.6.0.7611.00.0104
eMMC-boot
Apr 12 2012,16:47:46
Any advise would be greatly appreciated! Thank you!
Click to expand...
Click to collapse
For starters, you are on ics firmware so you should run the ics version of juopunutbear. I suggest flashing a rooted Rom based on the ota and then try again.
Sent from my ADR6425LVW using Tapatalk 2
topgun1953 said:
For starters, you are on ics firmware so you should run the ics version of juopunutbear. I suggest flashing a rooted Rom based on the ota and then try again.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
I successfully flashed one of the stock ICS ROMs! What got me all confused to begin with was the prerequisite that I had to be on a stock Gingerbread ROM or the 3.14.605.5 ICS leak. That's why I tried flashing the original Vigor GB ROM on my phone. I still want to get S-OFF, but I need to read the instructions more carefully. Thanks for your help!
dragonstalker said:
You need to use interface to fastboot boot.img then run firmware update for old firmware n old CWR. BASICALLY GO BACK TO STOCK REZOUND N START THE WHOLE PROCESS OVER LIKE DAY 1!
Good news is you don't need to do the wire trick again. Your phone crashed during the firmware upgrade now its stuck in limbo n doesn't know how to handle the 2 sets of hardware commands its receiving from the CMOS.
Click to expand...
Click to collapse
So I just need to flash my backed up boot.img, and then flash the 3.14.605.12 RUU? Then re-root and retry the OTA Global Update?
tomtripp21 said:
So I just need to flash my backed up boot.img, and then flash the 3.14.605.12 RUU? Then re-root and retry the OTA Global Update?
Click to expand...
Click to collapse
pretty much. From looking at everything looks like you are on ICS, but its not letting you reprogram. usually happens when an update fails. When you run Juonobear and run the ics upgrade over again, it should reboot like 3 or 4 times. Sounds like you never let the process finish. Final note, i'm not sure where you got your firmware from, but your radios do not look familiar. Not saying they are wrong, just not radio's i've ever seen flashed. BUT, I don't usually change radio's unless there is a huge need for it. you should be on radio's 10r/08r that come with the original ICS firmware update. I'll watch the thread throughout the day to lend support where I can. Hope this helps.
dragonstalker said:
pretty much. From looking at everything looks like you are on ICS, but its not letting you reprogram. usually happens when an update fails. When you run Juonobear and run the ics upgrade over again, it should reboot like 3 or 4 times. Sounds like you never let the process finish. Final note, i'm not sure where you got your firmware from, but your radios do not look familiar. Not saying they are wrong, just not radio's i've ever seen flashed. BUT, I don't usually change radio's unless there is a huge need for it. you should be on radio's 10r/08r that come with the original ICS firmware update. I'll watch the thread throughout the day to lend support where I can. Hope this helps.
Click to expand...
Click to collapse
Now I'm a little confused, sorry. I need to run the juopunutbear program again? My radios are 2.22.10.0801r/2.22.10.0803r, Hboot 2.27. I'm downloading the .12 RUU from Android Police. I've tried re-flashing the boot.img from my nand backup, but it keeps saying:
C:\mini-adb_vigor>fastboot flash boot.img
unknown partition 'boot.img'
error: cannot determine image filename for 'boot.img'
edit: I fixed the flash, I forgot to add the partition in the command, duh... So I flashed my backed up boot.img, now I just need to flash the .12 RUU?
I have the backup img in the file where I have fastboot, adb, etc.. What am I doing wrong?
tomtripp21 said:
Now I'm a little confused, sorry. I need to run the juopunutbear program again? My radios are 2.22.10.0801r/2.22.10.0803r, Hboot 2.27. I'm downloading the .12 RUU from Android Police. I've tried re-flashing the boot.img from my nand backup, but it keeps saying:
C:\mini-adb_vigor>fastboot flash boot.img
unknown partition 'boot.img'
error: cannot determine image filename for 'boot.img'
edit: I fixed the flash, I forgot to add the partition in the command, duh... So I flashed my backed up boot.img, now I just need to flash the .12 RUU?
I have the backup img in the file where I have fastboot, adb, etc.. What am I doing wrong?
Click to expand...
Click to collapse
I have now tried to flash the .12 RUU in Hboot but it will not flash it, probably because my firmware is newer right? Back to the drawing board....
Still to no avail I am getting nowhere. I flashed the stock recovery and did a factory reset from Hboot. Nothing, I have tried flashing the newest RUU, nothing, I'm flashed back to ra-recovery. Can anybody give me a solution step by step to get a ROM loaded and booting?
Well I finally got it up and working. I loaded the old firmware and was able to restore by backup. Thanks to all who chimed in with helpful advice. I'm hesitant to retry the Global update, but I might go ahead and give it another shot.
Glad you figured to restore the firmware. It's not hard to flash the global. Run the firmware, then run the recovery then flash Rom. Do it right in that order n you don't have any issues. Use 2 sdcards if you need to because the firmware upgrade won't delete the ph98 off your card. You will need to do it manually.
Sent from ICS REZOUND S-OFF
I've tried multiple ways of returning to stock, including PJ75IMG.zip and running the RUU for my version. TWRP won't let me flash anything I've tried and they all fail. I can install backups from TWRP no problem there. I'll try to give as many details as possible, but I can't figure out what is wrong.
*Tampered* Unlocked*
JEWEL PVT SHIP S-ON RL
HBOOT is 1.19
Radio is 1.12
Recovery is TWRP version 2.2.2.0
Software version is 2.13.651.
I'm dying to figure this one out, as all I want to do is return it to completely stock so I can start again clean. Thanks guys.
What happens when you try to run ruu
Sent from my EVO using xda app-developers app
PathogenVirdae said:
I've tried multiple ways of returning to stock, including PJ75IMG.zip and running the RUU for my version. TWRP won't let me flash anything I've tried and they all fail. I can install backups from TWRP no problem there. I'll try to give as many details as possible, but I can't figure out what is wrong.
*Tampered* Unlocked*
JEWEL PVT SHIP S-ON RL
HBOOT is 1.19
Radio is 1.12
Recovery is TWRP version 2.2.2.0
Software version is 2.13.651.
I'm dying to figure this one out, as all I want to do is return it to completely stock so I can start again clean. Thanks guys.
Click to expand...
Click to collapse
Update your twrp to 2.3.3.0 or if you want to return to stock you have to relock your bootloader
Sent from my PoS MoPho
TWRP won't take the update for whatever reason, and I can't get fastboot to work over this machine, so I'm thinking about running linux to get into the phone a little easier (hopefully.) I either have to wait til I can use my roommates machine, or start installing a dual boot
Have you tried goomanager to update twrp?
Yea, it downloads the file, gives a message stating it has been installed, then it does nothing. No reboot. when I manually reboot into recovery, it still sits at previous version.
Do you have adb setup on your PC? Also do you have the correct drivers installed ?
#Root-Hack_Mod*Always=SG3
Ok, so finally got my fastboot to work
"Fastboot oem lock"
Worked. Awesome...now it's stuck in a bootloader loop. Won't let me into recovery, but I can still get to fastboot. I can't get to recovery, factory reset, etc. just hboot and fastboot.
screen shows tampered relocked and security warning.
Any ideas? I can get it to flash the PJ75IMG.zip but it says main version is older! or something to that effect and it fails. Any ideas?
UPDATE: Got it unlocked again and it booted back into OS.
Bump. I'd really like to get this phone on the newest versions of everything. Anyone have any ideas?
PathogenVirdae said:
Bump. I'd really like to get this phone on the newest versions of everything. Anyone have any ideas?
Click to expand...
Click to collapse
Did you fastboot flash the stock recovery after you relocked?
bigdaddy619 said:
Did you fastboot flash the stock recovery after you relocked?
Click to expand...
Click to collapse
No, but I was wondering if I could flash things in that state. Since it wasn't moving past bootloader I wasn't sure if I should try anything. Is stock recovery effected by anything like software version?
Sorry to need hand-holding, but I'm really lost, lol :crying:
Go to unlimiteds site and s-off, all your problems will be solved, they go step by step to get you back to stock.
Sent from my EVO using xda premium
PathogenVirdae said:
No, but I was wondering if I could flash things in that state. Since it wasn't moving past bootloader I wasn't sure if I should try anything. Is stock recovery effected by anything like software version?
Sorry to need hand-holding, but I'm really lost, lol :crying:
Click to expand...
Click to collapse
Well since you are s-on you can't flash PJ75IMG files from bootloader if you want to update your phone to the latest OTA you have to relock your bootloader and reflash the stock recovery and take the OTA then unlock and flash twrp again.
If you click the link in my sig and download the 3.15/2.09 hboot file there is a stock recovery in the files as well as instructions on how to flash it
Sent from my PoS MoPho
---------- Post added at 09:19 AM ---------- Previous post was at 09:15 AM ----------
mrlakadaddy said:
Go to unlimiteds site and s-off, all your problems will be solved, they go step by step to get you back to stock.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Or this ^^^^ a much better choice
Sent from my PoS MoPho
I'm assuming that would be "flash recovery recovery.img" once I found a suitable stock recovery?
PathogenVirdae said:
I'm assuming that would be "flash recovery recovery.img" once I found a suitable stock recovery?
Click to expand...
Click to collapse
There is a stock recovery on the files I recommend as well as the commands to use
Sent from my PoS MoPho
So I'm trying to run the Dirty Racun method, and I'm sitting at this part "sudo ./fastboot flash zip RUU.zip"
How long should this normally take? The only thing I can see is Sending 'zip' (filesize) and htc on the phone. Does this process take awhile? >20 mins? Is there some kind of progress meter?
Update:// So apparently I'm stuck. DirtyRacun seems to hang on the RUU flash. BigDaddy, it also stops half way thru the stock recovery flash.
Ok this is odd. I tried to go fully stock from Newt Sense 5 1.0.4 ROM so I can completely install the rom from the ground up (I had black boxes show up when the 1.0.4 patch was installed on some menus and crashes in settings).
I relocked the bootloader and used RUU which wiped the CWM Recovery and the ROM from the device but then it gave me this error and now the phone will not boot past recovery and will not allow me to re-unlock my bootloader for whatever reason. Any ideas? Any help would be appreciated since my phone is pretty much a paper weight right now.
xraytid said:
Ok this is odd. I tried to go fully stock from Newt Sense 5 1.0.4 ROM so I can completely install the rom from the ground up (I had black boxes show up when the 1.0.4 patch was installed on some menus and crashes in settings).
I relocked the bootloader and used RUU which wiped the CWM Recovery and the ROM from the device but then it gave me this error and now the phone will not boot past recovery and will not allow me to re-unlock my bootloader for whatever reason. Any ideas? Any help would be appreciated since my phone is pretty much a paper weight right now.
Click to expand...
Click to collapse
There is always something wrong with his ROMs, including the ones he made for the Thunderbolt. . I tried flashing one of his a week ago. The phone would not connect to the network, wifi worked. I ran a different rom still no connection, ran the RUU, no luck. I had a new sim put in, and wound up getting the unit replaced.
Are you S-Off? Are the proper drivers for your computer installed?
http://forum.xda-developers.com/showthread.php?t=1928439
Also did you have the eng hboot and did you switch back to the pre ota hboot before relocking? Cause if you locked with eng then that will definitely brick your phone. If that didn't happen and you can still get into fastboot then it's just your on the new hboot and RUU won't run with the new hboot. Just flash the pre ota hboot then run the RUU that should make it run.
Sent from my 5 Senses of DNA
RLGL said:
There is always something wrong with his ROMs, including the ones he made for the Thunderbolt. . I tried flashing one of his a week ago. The phone would not connect to the network, wifi worked. I ran a different rom still no connection, ran the RUU, no luck. I had a new sim put in, and wound up getting the unit replaced.
Click to expand...
Click to collapse
Hmmm. I've used his ROMs on my last three devices without issue. At all. Including the DNA.
Sent from my Nexus 10
xraytid said:
Ok this is odd. I tried to go fully stock from Newt Sense 5 1.0.4 ROM so I can completely install the rom from the ground up (I had black boxes show up when the 1.0.4 patch was installed on some menus and crashes in settings).
I relocked the bootloader and used RUU which wiped the CWM Recovery and the ROM from the device but then it gave me this error and now the phone will not boot past recovery and will not allow me to re-unlock my bootloader for whatever reason. Any ideas? Any help would be appreciated since my phone is pretty much a paper weight right now.
Click to expand...
Click to collapse
Are you on the 2.04 firmware at all?
Sent from my HTC6435LVW using XDA Premium HD app
try this
xraytid said:
Ok this is odd. I tried to go fully stock from Newt Sense 5 1.0.4 ROM so I can completely install the rom from the ground up (I had black boxes show up when the 1.0.4 patch was installed on some menus and crashes in settings).
I relocked the bootloader and used RUU which wiped the CWM Recovery and the ROM from the device but then it gave me this error and now the phone will not boot past recovery and will not allow me to re-unlock my bootloader for whatever reason. Any ideas? Any help would be appreciated since my phone is pretty much a paper weight right now.
Click to expand...
Click to collapse
Youre not bricked. As long as you can get to the bootloader menu there is hope. You have to re unlock using the unlock token HTC emailed you through fast boot . fastboot Flash unlocktoken unlock_code.bin I believe is the command. Then after reflash your ROM through recovery
Flash twrp recovery if possible via fastboot if you don't already have it, adb sideload a stock rom
Sent from my HTC6435LVW using xda app-developers app
So I have a problem with my phone randomly rebooting, so I am trying to run the stock RUU to make sure it is nothing I did. The problem is that when I do this I get to the step were the phone is supposed to go to the bootloader and it just shows a black screen with the HTC logo. Any idea what I should try next?
Have you re-locked your bootloader and installed a stock recovery?
How do I do that without the ruu
Sent from my EVO using xda app-developers app
You have to be re-locked for the RUU to work.
fastboot oem lock
Try this script thanks to viperboy
http://forum.xda-developers.com/showthread.php?t=2197909
Good luck!
Sent from my EVO using xda app-developers app
The script hangs at starting ruu mode
RUU not working on Evo Jewel
kevinb99 said:
The script hangs at starting ruu mode
Click to expand...
Click to collapse
Did you ever figure this out? I have the same problem, and I too have tried the Vipe utility. It does flash the recovery in the batch file, but RUU fails. I have tried all RUU's from androidfiles for the jewel and they fail to with an unknown error. I cannot get any custom roms to flash either, they fail altogether or they flash but never get past they HTC screen. I can still boot into recovery and I have also tried relocking the bootloader.
jseibert81 said:
Did you ever figure this out? I have the same problem, and I too have tried the Vipe utility. It does flash the recovery in the batch file, but RUU fails. I have tried all RUU's from androidfiles for the jewel and they fail to with an unknown error. I cannot get any custom roms to flash either, they fail altogether or they flash but never get past they HTC screen. I can still boot into recovery and I have also tried relocking the bootloader.
Click to expand...
Click to collapse
No, that sucks, I was able to get stock rooted on and have since gotten 5 replacement phones.
Got RUU working
kevinb99 said:
No, that sucks, I was able to get stock rooted on and have since gotten 5 replacement phones.
Click to expand...
Click to collapse
So your problem is with the phone rebooting still? I was having trouble installing the RUU and it seems so have a lot of people. The boot loader does need to be locked, that was one of my problems. I'm also pretty sure I wasn't using the correct RUU, as I tried so many. Vipe doesn't work but will at least push a recovery. I re-locked the bootloader, and tried one last RUU and it worked.
When I tried flashing the phone originally, something went wrong. TWRP wouldn't install any Roms at all even when some completed successfully. It would just hang at the HTC screen. I could probably go back and try it again but I'm done. I won't touch another HTC phone as far as flashing goes.
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
skylirizm said:
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
Click to expand...
Click to collapse
Hello my friend, the reason you can't load the pg86img is because you have unlocked bootloader. The fastboot commands could help us a lot, did you follow the controlbear instructions in the correct order? I think there is a way through windows with exe files I don't remember well because I did S-OFF 3years+ before. If you want we can try together some time. If you want for start we can flash 4ext recovery and a custom rom so your phone can boot.
mhnx said:
Hello my friend, the reason you can't load the pg86img is because you have unlocked bootloader. The fastboot commands could help us a lot, did you follow the controlbear instructions in the correct order? I think there is a way through windows with exe files I don't remember well because I did S-OFF 3years+ before. If you want we can try together some time. If you want for start we can flash 4ext recovery and a custom rom so your phone can boot.
Click to expand...
Click to collapse
Hi there, I didn't know with having the bootloader unlocked that it would cause any issues, but there you go!
Yeah, if there's a guide to flashing the 4EXT Recovery and a custom rom that would be great!
I have a fair idea of how to do it, but don't want to try anything without having someone of greater knowledge point me in the right direction
Thanks!
Just an update, I did come across a thread to flash 4EXT Recovery onto my Evo 3D.
Put Recovery.img into my platform-tools folder, used the fastboot command, it said sending and OK.
Selected recovery and still boot loops. No idea where to go from here now
skylirizm said:
Just an update, I did come across a thread to flash 4EXT Recovery onto my Evo 3D.
Put Recovery.img into my platform-tools folder, used the fastboot command, it said sending and OK.
Selected recovery and still boot loops. No idea where to go from here now
Click to expand...
Click to collapse
Sorry for being late, I had some problems with my internet connection. Can you boot into recovery? Power button + Vol- and choose recovery, if you can boot tell me first which version you have and second what type of rom you want to have.
mhnx said:
Sorry for being late, I had some problems with my internet connection. Can you boot into recovery? Power button + Vol- and choose recovery, if you can boot tell me first which version you have and second what type of rom you want to have.
Click to expand...
Click to collapse
Hey there,
That's OK, I don't mind the wait, it's all good!
I can boot into Fastboot, but when I choose recovery/factory reset etc, it shows the HTC Logo and then goes into a bootloop.
As for the ROM, I want to get the original GB ROM for it because when I updated it to the latest ICS that's when the camera and touch started to get weird, whereas beforehand it was fine.
So thinking, if I go back down to GB Stock, that it should be all fine again, but I am not too sure on that one.
Thanks!
skylirizm said:
Hey there,
That's OK, I don't mind the wait, it's all good!
I can boot into Fastboot, but when I choose recovery/factory reset etc, it shows the HTC Logo and then goes into a bootloop.
As for the ROM, I want to get the original GB ROM for it because when I updated it to the latest ICS that's when the camera and touch started to get weird, whereas beforehand it was fine.
So thinking, if I go back down to GB Stock, that it should be all fine again, but I am not too sure on that one.
Thanks!
Click to expand...
Click to collapse
Well, we have to downgrade the hboot version first. Did you do the wire trick procedure right? You can download a pg86img and flash it first to fix the bootloops. First lock the bootloader. When you finish this report here. I have to sleep it's late here and I work early. I'll send you tomorrow. See you.
mhnx said:
Well, we have to downgrade the hboot version first. Did you do the wire trick procedure right? You can download a pg86img and flash it first to fix the bootloops. First lock the bootloader. When you finish this report here. I have to sleep it's late here and I work early. I'll send you tomorrow. See you.
Click to expand...
Click to collapse
Ok, the technician I took the phone to supposedly did the wire trick for S-OFF, but, it's still S-ON.
I have downloaded a lot of stock PG86IMG files before posting on here and none work, they scan when in bootloader and then nothing after that.
But that would be because I haven't locked the bootloader. So in saying this, I lock the bootloader following steps on many forum posts on here, then flash a .zip file that's correct and then it should all work?
I'll wait for your response, thanks!
skylirizm said:
Ok, the technician I took the phone to supposedly did the wire trick for S-OFF, but, it's still S-ON.
I have downloaded a lot of stock PG86IMG files before posting on here and none work, they scan when in bootloader and then nothing after that.
But that would be because I haven't locked the bootloader. So in saying this, I lock the bootloader following steps on many forum posts on here, then flash a .zip file that's correct and then it should all work?
I'll wait for your response, thanks!
Click to expand...
Click to collapse
I do not think that the wire trick procedure was correct because you are still s on. Lock the bootloader and try to load the zip.
mhnx said:
I do not think that the wire trick procedure was correct because you are still s on. Lock the bootloader and try to load the zip.
Click to expand...
Click to collapse
Hey, so I tried a P86IMG.zip from this thread here - http://forum.xda-developers.com/showthread.php?t=2274635
I couldn't find another one and with that I get an error "Main Version Fail" or "Main Version Check Fail".
I then tried RUU and RUU in zip format.
RUU comes back with wrong bootloader error. (I couldn't find an RUU that matched my radio version so I went with the nearest one)
RUU Zip comes back through fastboot with "remote 43 main version check fail"
Also I tried to do the Wire Trick and got stuck at the "ADB and Fastboot not found" even though the files are there and the phone is connected.
So still a little bit...stuck :\
Also relocked bootloader it just says relocked now.
If you need any other additional info I can send screenshots of what it's at.
Thanks!
skylirizm said:
Hey, so I tried a P86IMG.zip from this thread here - http://forum.xda-developers.com/showthread.php?t=2274635
I couldn't find another one and with that I get an error "Main Version Fail" or "Main Version Check Fail".
I then tried RUU and RUU in zip format.
RUU comes back with wrong bootloader error. (I couldn't find an RUU that matched my radio version so I went with the nearest one)
RUU Zip comes back through fastboot with "remote 43 main version check fail"
Also I tried to do the Wire Trick and got stuck at the "ADB and Fastboot not found" even though the files are there and the phone is connected.
So still a little bit...stuck :\
Also relocked bootloader it just says relocked now.
If you need any other additional info I can send screenshots of what it's at.
Thanks!
Click to expand...
Click to collapse
Did you try flashing the zip after the locking? You are doing the wire trick procedure on live linux cd?
mhnx said:
Did you try flashing the zip after the locking? You are doing the wire trick procedure on live linux cd?
Click to expand...
Click to collapse
Yes, tried flashing the zip after locking. Live CD is being used also. I will try again later. Thanks!
skylirizm said:
Yes, tried flashing the zip after locking. Live CD is being used also. I will try again later. Thanks!
Click to expand...
Click to collapse
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
mhnx said:
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
Click to expand...
Click to collapse
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
donkeykong1 said:
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
Click to expand...
Click to collapse
Oh that would be extremely helpful, I can use Linux, but prefer my Windows PC as it has all the files and it's just easier.
Thanks so much!
mhnx said:
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
Click to expand...
Click to collapse
donkeykong1 said:
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
Click to expand...
Click to collapse
So update -
DK sent me the windows version of ControlBear via PM - thank you.
Have an unlocked bootloader.
I tried ControlBear, and because I can not boot into the OS, I start it at Fastboot USB, it reboots, then says "Connecting to Device", then "Testing ADB connection" then "Press Enter To Exit" and that's it, can't do anything else from there, and it gets stuck in the boot loop that it still has.
Tried again to google for methods for HBOOT 1.53, and am trying some of those methods, but it's not looking good at all.
I haven't even got to the stage where it asks me to do any sort of wire trick.
Also my battery in the EVO 3D has died so am using a battery out of a HTC MyTouch 4G with help from electrical tape :\
So now, any suggestions? I am trying to flash another RUU that's stock for my Radio (Well, it's close enough - RUUs are both 11.25.3504.06, mine is 11.25.3504.16)
EDIT: Tried all RUUs with relocked bootloader and comes back with bootloader error (ERROR 140). So, no idea.
Also it's scanning for PG86DIAG.img files on the SD Card - that's not normal is it.
Do you think we should give up on it, it's probably hard bricked and dead now
I think it's literally hard bricked and no way to bring it back from the dead.
As per my original post, all the details for the phone are there. And it sucks that I can't find a correct RUU for my phone (As it was Telstra AU - latest update of ICS)
AHH I don't know.
skylirizm said:
So update -
DK sent me the windows version of ControlBear via PM - thank you.
Have an unlocked bootloader.
I tried ControlBear, and because I can not boot into the OS, I start it at Fastboot USB, it reboots, then says "Connecting to Device", then "Testing ADB connection" then "Press Enter To Exit" and that's it, can't do anything else from there, and it gets stuck in the boot loop that it still has.
Tried again to google for methods for HBOOT 1.53, and am trying some of those methods, but it's not looking good at all.
I haven't even got to the stage where it asks me to do any sort of wire trick.
Also my battery in the EVO 3D has died so am using a battery out of a HTC MyTouch 4G with help from electrical tape :\
So now, any suggestions? I am trying to flash another RUU that's stock for my Radio (Well, it's close enough - RUUs are both 11.25.3504.06, mine is 11.25.3504.16)
EDIT: Tried all RUUs with relocked bootloader and comes back with bootloader error (ERROR 140). So, no idea.
Also it's scanning for PG86DIAG.img files on the SD Card - that's not normal is it.
Do you think we should give up on it, it's probably hard bricked and dead now
I think it's literally hard bricked and no way to bring it back from the dead.
As per my original post, all the details for the phone are there. And it sucks that I can't find a correct RUU for my phone (As it was Telstra AU - latest update of ICS)
AHH I don't know.
Click to expand...
Click to collapse
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
mhnx said:
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
Click to expand...
Click to collapse
Hey there, thanks for the help again, unfortunately, still didn't work.
I unlocked the bootloader again. Then tried to flash what you said, it said "writing" then "successful". I pulled the battery and tried to boot into recovery and just loops
skylirizm said:
Hey there, thanks for the help again, unfortunately, still didn't work.
I unlocked the bootloader again. Then tried to flash what you said, it said "writing" then "successful". I pulled the battery and tried to boot into recovery and just loops
Click to expand...
Click to collapse
Try doing:
fastboot erase recovery
fastboot flash recovery "recovery".img
fastboot format system
fastboot format boot
And if it still doesn't let me send you a boot.img in some minutes to try flashing it.
EDIT: And something last, you can still do the controlbear trick while not in OS, its easy if you wanna try let me know.
skylirizm said:
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
Click to expand...
Click to collapse
i have same problem plz give me GB rom link and flash method
---------- Post added at 07:56 AM ---------- Previous post was at 07:42 AM ----------
mhnx said:
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
Click to expand...
Click to collapse
plz help my htc evo 3d is bootloop no go to any recovery mode i flash all recovery
BOOTLOADER-UNLOCK
HBOOT-1.53.0007
RADIO-11.25.3504.06.M
i flash many ruu.exe but this
RUU_SHOOTER_U_ICS_35_S_hTC_Asia_WWE_3.28.707.1_Radio_11.77.3504.00U_11.25.3
flash seccussfully without any error but no booting only htc logo plz help