Hi I have this problem, after doing a Factory Reset and now, Im having a Bootloop stuck in the (Firefly Logo)
my device is Firefly R60 and i think its a spreadtrum phone
Gingerbread 2.3.7
How can i restore my device back to normal, its a new device and i think there is no official stock rom or firmware to download and no official cwm for my device... but my cousin has a phone same model as mine, i just wonder if i could backup his Rom inorder to restore my device via pc?
can someone help me?...
Related
Hi xda , i have this china-bought Galaxy S3 GT-I9300.
It started out with gps not working and i tried to flash a stock rom using odin (device was rooted) and it failed after countless flashings.
And then whenever I tried to boot the device again it was stuck at the ''Samsung GALAXY SIII GT-I9300'' screen. not sure if it was a bootloop but it was just hanged there. I have cwm recovery mode but i can't access download mode however i tried. And all of my computers cant seem to detect the device. so basically the thing i am able to access now is the cwm recovery mode. i tried various roms but to no avail.(they all hanged while installing system files)
Some specs about this device i know:
- Board : uniscope77_bu3_cu_ics2
- CPU : armeabi-v7a
some additional info : i once formatted everything on the device using cwm (internal storage , system , everything)
-I tried reset to factory settings countless times too but they were all stuck at the ''Samsung GALAXY SIII GT-I9300'' screen.
-Its original stock firmware was from china and yes , ive tried using china stock rom and all i get was blahblahblah and a ''(bad)'' thing.
if you need anything else like what other things i did to the device pls tell me. pls help me solve this problem thanks you ^_^
site
zBurnXz said:
Hi xda , i have this china-bought Galaxy S3 GT-I9300.
It started out with gps not working and i tried to flash a stock rom using odin (device was rooted) and it failed after countless flashings.
And then whenever I tried to boot the device again it was stuck at the ''Samsung GALAXY SIII GT-I9300'' screen. not sure if it was a bootloop but it was just hanged there. I have cwm recovery mode but i can't access download mode however i tried. And all of my computers cant seem to detect the device. so basically the thing i am able to access now is the cwm recovery mode. i tried various roms but to no avail.(they all hanged while installing system files)
Some specs about this device i know:
- Board : uniscope77_bu3_cu_ics2
- CPU : armeabi-v7a
some additional info : i once formatted everything on the device using cwm (internal storage , system , everything)
-I tried reset to factory settings countless times too but they were all stuck at the ''Samsung GALAXY SIII GT-I9300'' screen.
-Its original stock firmware was from china and yes , ive tried using china stock rom and all i get was blahblahblah and a ''(bad)'' thing.
if you need anything else like what other things i did to the device pls tell me. pls help me solve this problem thanks you ^_^
Click to expand...
Click to collapse
Where did you bought it?
China
your screwed the only thing you can do is download Chn_Chn Firmware from Samsungs website and flash it though odin. And that's the only fimrware that will work, unless you flash a custom bootloader through your sd card as then it will overwrite the encrypted boot.img allowing you flash any European Firmware.
hi guys
really could do with some help
i had flashed my u8850 when i first got my phone and played around with the custom roms which were not fully usable at the time. As my wife wanted the phone I flashed it to stock rom .. proper stock without root or CWM... with SUT l3 tool
now she gave it back to me as she upgraded, and i went to do a factory reset to clear out the contacts etc.. and start afresh.
it went and got stuck at the huawei symbol and hasn't gone off since.
since researching this, i found out that its a boot loop and anyone who has flashed a custom rom can never do a factory reset from the settings menu, but must do it in CWM instead.
so, Im stuck in a boot loop, with a original rom with no CWM and although the computer recognizes the phone as a huawei and loads the ADB drivers etc... Ive got no way to flash a rom with CWM to get me to cyanogen at all.. SUT doesn't recognize the phone at all..
so ive got the roms i need and even tried with android AIO flasher ...
clearly i need some help ...
can you assist?.. thanks..
The same problem
I got the same problem... I "played" with the ROM Toolbox app (changed boot animation, changed status bar icons, changed the SYSTEM UI), and now I got the same problem... Can anyone help us plz.?
So from yesterday my phone is stucked on a bootloop ... i didn't installed anything in the last days, i didn't installed anyupdate.
I tried to install stock firmware via odin but i'm still on bootloop ...
Before installing stock firmware my phone was booting until android .. it showed Android is optimizing app x from xx and then rebooting and doing the same thing ..
After intalling stock my phone is restarting after Galaxy s6 edge - powered by android logo.
I've looked into this forum and tried to solve how others solved,but nothings work ...
Anyone knows how to solve this?
I tried to flash custom rom but i cannot copy on internal storage via twrp ... and i dunno also how to solve this ...
VladHD said:
So from yesterday my phone is stucked on a bootloop ... i didn't installed anything in the last days, i didn't installed anyupdate.
I tried to install stock firmware via odin but i'm still on bootloop ...
Before installing stock firmware my phone was booting until android .. it showed Android is optimizing app x from xx and then rebooting and doing the same thing ..
After intalling stock my phone is restarting after Galaxy s6 edge - powered by android logo.
I've looked into this forum and tried to solve how others solved,but nothings work ...
Anyone knows how to solve this?
I tried to flash custom rom but i cannot copy on internal storage via twrp ... and i dunno also how to solve this ...
Click to expand...
Click to collapse
Factory reset from recovery.
Sent from my SM-N920C
i did that ... same
Problem solved with JTAG repair.
Can you describe in details?
Sent from my SM-N920C
When a phone is in a hard-bricked state it’s most likely that the bootloaders, which is the phones initial code to launch the phones ROM, becomes corrupted.
The only way to revive the phone is to rewrite the bootloader code.
So basically, if you can't flash a rom through twrp or odin, this service we'll rewrite the os from scratch without having any acces to phone.
Hello,
I have been for 2 weeks searching for a solutions to fix my device or at less saving my data but no hope,
Samsung device is s3 9300I unrooted with stock rom,
My main problem : I'm stuck on the Samsung start up boot logo I only can access to recovery and download mode,I tried to flash recovery file via odain but it keeps failed and I tired to flash TWRP the same faild to complete flashing
I need any solution to backup my data before I try factory rest and wiping all my data, please guys help me my last hope!!
Thanks
???
all of sudden my tablet didn't boot. It stuck on lenovo logo screen. i did factory reset but nothing so i decided to reflash the stock rom but after 2 or 3 flashes with stock roms i found on internet my a10 tablet is not opening at all (not charging also). I can only flash it with sp flash tool, i think the device bricked. Is there any possible solution to solve this problem? The stock roms i used are these: Lenovo_A10-70F_MT6752_S000021_150501,
A10-70F_S000214_M_170207_ROW,
A10-70F_S000121_151222_ROW-1
My initial stock version was A10-70F_MT6752_S000021_150501
thanks.