I think I may have bricked my Galaxy S2 I9100 but I'm hoping someone might help.
I was in the middle of flashing DarkyROM_10.2_Resurrection using Odin and accidentally cancelled it.
Now the phone doesn't respond to anything. There's nothing on the screen at all.
It won't switch on and go into Recovery Mode or Download Mode or even get recognised by the PC, whereas before all of these were possible.
I can't tell whether it's charging or not but it was on pretty much full charge before this.
The phone appears to be slightly warm near the rear camera lens when plugged into the computer via USB.
I've tried a recovery via Kies too but after downloading the restore files, the program shuts down.
Odin doesn't recognise the phone's plugged in because I can't get into Recovery Mode.
There's nothing on the phone I need.
Is there anything else I could try?
Thank you.
May have ?
Try a jig even tho it's highly unlikely to work. It's also very unlikely to be JTAG'able, though if you can have someone who does JTAG's take a look at it to determine if JTAG is possible for free, you might as well do that.
Motherboard replacement is the fix in this instance; either new motherboard by Samsung authorised service centre, or a 2nd hand board from a 'donor' phone you swap out yourself/or pay a local mobile repair shop to do it (will be cheaper than paying Samsung to put a new one in).
MistahBungle said:
May have ?
Try a jig even tho it's highly unlikely to work. It's also very unlikely to be JTAG'able, though if you can have someone who does JTAG's take a look at it to determine if JTAG is possible for free, you might as well do that.
Motherboard replacement is the fix in this instance; either new motherboard by Samsung authorised service centre, or a 2nd hand board from a 'donor' phone you swap out yourself/or pay a local mobile repair shop to do it (will be cheaper than paying Samsung to put a new one in).
Click to expand...
Click to collapse
Thank you for that, but I have absolutely no idea what a "jig" or a "JTAG" is.
Google/XDA search is your friend. But as I said, these are unlikely to work/be possible. Take it to a service centre.
MistahBungle said:
Google/XDA search is your friend. But as I said, these are unlikely to work/be possible. Take it to a service centre.
Click to expand...
Click to collapse
Thanks for that.
Looks like a JIG will only work if there's something on the screen.
Since I have nothing on the screen, it's unlikely to work.
Precisely.
However, there are really rare cases (like a very small handful over the past two years out of many thousands) where a jig will boot the phone into download mode in these circumstances. And a jig costs a couple of bucks to buy/make, so you might as well try one before you decide to take it to a service centre to have the motherboard replaced/or replace it yourself/or get a new phone. Just don't get your hopes up/realise we're talking about a 0.00001% chance of it working.
MistahBungle said:
Precisely.
However, there are really rare cases (like a very small handful over the past two years out of many thousands) where a jig will boot the phone into download mode in these circumstances. And a jig costs a couple of bucks to buy/make, so you might as well try one before you decide to take it to a service centre to have the motherboard replaced/or replace it yourself/or get a new phone. Just don't get your hopes up/realise we're talking about a 0.00001% chance of it working.
Click to expand...
Click to collapse
You're right - a JIG only costs a couple of quid on Ebay.
I don't know why the damn instructions with the DarkyROM_10.2_Resurrection ROM said to tick the Partition box in Odin. If I hadn't done that, I'm sure the phone would have been OK. Now I have a bricked phone. Thanks DarkyROM !
Only NOW have I found posts which say never to tick the Partition box. Why does Odin include that option anyway?
The option is included in Odin because in some very specific circumstances you may need to flash a PIT. Obviously flashing a rom is not normally one of those circumstances. Definitely try a jig, cross your fingers.
MistahBungle said:
The option is included in Odin because in some very specific circumstances you may need to flash a PIT. Obviously flashing a rom is not normally one of those circumstances. Definitely try a jig, cross your fingers.
Click to expand...
Click to collapse
Thanks for your help MistahBungle.
I may try a JIG, even though the sellers say not to bother if there's only a black screen.
Related
Hi,
I read and followed lots of excellent threads on here and successfully rooted my S2. I then flashed it with the Revolution ROM which worked fine, later tried the VK + Siyah which also ran fine.
Today I decided to try WajkIUI but after flashing and rebooting, the phone reset, the button lights came on and then it hung. Now I can't get a thing out of it, no booting, no recovery mode and no sign of it in ODIN.
It sounds completely hard-bricked but I don't really understand how it can be.
Any ideas?
Have tried soft and hard resetting but nothing.
Cheers
Without recovery mode your last best (remote) chance before you send it to Samsung would be a jig.
That's what I was thinking but why would it hard brick if the flash had worked?
And if I send if back to Samsung the warranty will be void anyway won't it?
Unfortunately that one's like asking how long a piece of string is (in other words, who knows ?). If it's a case of the NAND being stuffed as a result of the flash, a JTAG repair may fix it, but you won't know that until/unless you send it to a JTAG repairer.
It may be a hardware issue, cpu might have carked it or something.
Yeah, you've pretty much voided the warranty by putting non-stock firmware on it, but at the end of the day if Samsung can't tell it's been messed with you might get away with a warranty repair/replacement.
You'll only know that if you send it in to them to be looked at. So I guess you've got two choices to consider (not including the remote chance of the jig getting you into download mode).
I guess you could try another battery. Always the possibility it might have died.
Crap. Well, I'll give a jig a go and if that doesn't work then send it back and see what happens.
@ op
did you tried the key press combination to get into download mode? the things you have done has a very less possibility of hard brick.
That's what I thought, but no combination seems to work.
Was the battery full when you flashed?
Sent from my GT-I9100 using Tapatalk
Think it was about 96%.
You never know, it might just be a completely knackered battery. If you're planning on getting it fixed come what may, spending 20 bucks or whatever they cost in your country on another battery won't be the waste of money you might initially think.
If it doesn't fix this problem, at least you'll have a 2nd battery when you do get it fixed. I know I've found having a 2nd battery a godsend since I got mine a month ago, has come in really handy on trips where I've been away for more than a day and has meant I haven't had to worry bout bringing a charger along.
Could a battery just die like that? Seems a bit of coincidence.
Dunno. Anything's possible I guess. Yeah you're right, that would be coincidence. Given what you were doing when it died, I'm betting the NAND is shot & it will need to be JTAG'd either by Samsung or someone else.
mraquinn said:
Could a battery just die like that? Seems a bit of coincidence.
Click to expand...
Click to collapse
Which sucks. That said, according to a site in the UK it costs about £8 plus postage. Have ordered a USB jig just in case, and for £3 it's worth a go.
The really annoying thing is whether to root again if/when I do get it sorted. Am also checking with my network, see if they'll have a go under warranty and I'll forget to mention I was rooting it.
MistahBungle said:
Dunno. Anything's possible I guess. Yeah you're right, that would be coincidence. Given what you were doing when it died, I'm betting the NAND is shot & it will need to be JTAG'd either by Samsung or someone else.
Click to expand...
Click to collapse
On that note....if I wanted to upgrade to ICS, how would that be done without rooting - ie. would the counter look the same? (Long shot)
Yeah if you're going to get it fixed, chances are you'll end up flashing/rooting it again, so the jig will come in handy.
I guess that's something you'll need to decide when you get it back/get a new one. What happened to you isn't the norm tho. The large majority of flashes go smoothly for most people. But the reality is, every time you do it, you do run that small risk of it barfing for any number of a gazillion reasons (which are normally impossible to discover once it's happened). That's the risk people like us who frequent sites like this take.
Yeah if they/Samsung can't tell what happened to it, you'll possibly get away with it. And the fact you rooted it isn't information you have to volunteer to them by any means As to exactly what you should tell them, that's up to you.
Edit to add - Let us know how you get on once you have it sorted. Always useful to have people's experiences on here to give other people it happens to some kind of idea of how it might go down.
mraquinn said:
Which sucks. That said, according to a site in the UK it costs about £8 plus postage. Have ordered a USB jig just in case, and for £3 it's worth a go.
The really annoying thing is whether to root again if/when I do get it sorted. Am also checking with my network, see if they'll have a go under warranty and I'll forget to mention I was rooting it.
Click to expand...
Click to collapse
Well, according to the boffins online I have to go into a store to see if they can repair it. Hopefully they won't be able to check whether it's been rooted or not instore. In fact, if they can't power it on, I don't see how they could.
Random technical question: how can a software/firmware fault stop the hardware from even starting?
My only reference is building a PC - even if you knacker the BIOS and the harddrive, it will still power on so you can access them to put them right.
mraquinn said:
Random technical question: how can a software/firmware fault stop the hardware from even starting?
My only reference is building a PC - even if you knacker the BIOS and the harddrive, it will still power on so you can access them to put them right.
Click to expand...
Click to collapse
Firmware includes the boot sequence and recovery sequence on Android .
power goes to boot on file in effect
Or key combination goes to load recovery or download .
jje
Is that a bit of a flaw, for circumstances just like this?
And, does this mean that the USB jig has no chance of working - or is that the exact reason it might work?
JJEgan said:
Firmware includes the boot sequence and recovery sequence on Android .
power goes to boot on file in effect
Or key combination goes to load recovery or download .
jje
Click to expand...
Click to collapse
i thing jig can solve the problem
Hey there!,
I flashed my SGS2 a while ago with Checkrom, It was kinda unstable, Random shutdowns and stuff...
A week ago, i put my screen off because someone asked me something, When we were done talking, I wanted to turn my screen on again. I found out the phone was off.. I tried to turn it back on again but no luck.. I left out the battery for a while, didn't work either..
I think its bricked. I cant access anything. No download mode, Nothing...
What to do now?
Thanks in advance, Gino
Try a jig & see if that gets you into download mode. If not, possibly a JTAG repair by 3rd party repairer or service centre/Samsung authorised repairer.
Well.. I think i wont try the jig.. Because, If it doens't work. I spent my money for nothing I think ill go to a repairer than
Do you think a jig will work?
Truthfully ? No, the jig probably won't work. They are really cheap (a couple of dollars), but you might have to wait a couple of days -a week for it to arrive in the post if you order it online, whereas you might be able to have it repaired more quickly than that. If it were me, I'd probably try a jig anyways as I have a couple of previous phones to use as spares.
The other issue is whether you get it fixed under warranty or not if you send it to Samsung/an authorised repairer. That will depend on whether whomever fixes it can tell whether it's been messed with (rooted/running non stock firmware), and if they can whether they care or not.
The experience on here that I've seen the past 8-9 mths seems to be 50% of people who can't go back to stock & reset the flash counter seem to still get warranty service and roughly 50% don't & end up paying for the repair. So it's basically the luck of the draw. What you could do is if they end up wanting to charge you for the repair, you could get a quote from them first before they fix it and if it seems too high, maybe consider having it JTAG'd by a 3rd party repairer which might well end up cheaper.
But cross that bridge if you come to it and don't worry about that now. Send it in for repair & cross your fingers they fix it under warranty.
Good luck & I hope they fix it under warranty for you ;-)
lexaniji said:
Well.. I think i wont try the jig.. Because, If it doens't work. I spent my money for nothing I think ill go to a repairer than
Do you think a jig will work?
Click to expand...
Click to collapse
Hey guys, sorry for another topic, however I actually do know what is wrong with my phone and know it needs to be JTAG repaired..
however... I was wondering if anyone knew the root cause of this (no pun intended).. I was flashing JellyBam v5.0 (custom [email protected]~) and mid installation, phone froze, powered down and is now bricked. Any reason why it would do that mid install? Battery was 95%+
cheers
rsr1 said:
Hey guys, sorry for another topic, however I actually do know what is wrong with my phone and know it needs to be JTAG repaired..
however... I was wondering if anyone knew the root cause of this (no pun intended).. I was flashing JellyBam v5.0 (custom [email protected]~) and mid installation, phone froze, powered down and is now bricked. Any reason why it would do that mid install? Battery was 95%+
cheers
Click to expand...
Click to collapse
Please state more details. Rom, kernel, modem, odin, cwm, etc
He did. Regardless, none of that info would be relevant/useful in this case anyway, phone's borked.
@OP - Honestly, that's impossible to say. Something hardware related in the phone, something simple like the battery contacts not making a proper connection, something on the PC side even (temporary issue with the connection b/w the PC & phone) ? The possibilities are endless.
Have it looked at by a JTAG repairer & if that can't be done, maybe try and source a motherboard from a donor phone (broken screen or whatever). That will be the cheaper option than having Samsung replace the MB if it can't be JTAG'd, even if you pay a local mobile repair shop to install the 'new' MB (if you're not confident enough to DIY).
seanwong98 said:
Please state more details. Rom, kernel, modem, odin, cwm, etc
Click to expand...
Click to collapse
MistahBungle said:
He did. Regardless, none of that info would be relevant/useful in this case anyway, phone's borked.
@OP - Honestly, that's impossible to say. Something hardware related in the phone, something simple like the battery contacts not making a proper connection, something on the PC side even (temporary issue with the connection b/w the PC & phone) ? The possibilities are endless.
Have it looked at by a JTAG repairer & if that can't be done, maybe try and source a motherboard from a donor phone (broken screen or whatever). That will be the cheaper option than having Samsung replace the MB if it can't be JTAG'd, even if you pay a local mobile repair shop to install the 'new' MB (if you're not confident enough to DIY).
Click to expand...
Click to collapse
Yeah you are right it could be anything happening within the phone without my knowledge, luckily phone was connected to mains when i was flashing using CWM so no problems there, but i don't think i will find the reason why it actually happened as you said the possibilities are endless
I'm trying to get in touch with a place that does JTAG repairs at the moment, however im just scared they say it can't be done. Havent really got the money to fork out for a new MB. I bought the phone second hand last year (april) where i was told it was only 3-4weeks old however had no old purchase details. Is there any way for me to check if the warranty is still valid or does it become void after resale? Thanks
There used to be an online warranty checker on one of Samsung's regional websites (can't remember which, maybe someone else does ?) where you could put the serial number in & get the warranty end date, but I recall people on here saying it either went away or didn't work anymore at some point last year.
But I doubt you'd get warranty service without the original receipt anyway, and even if you had it, I'm not sure the warranty is transferable beyond the original purchaser (Someone else please correct me if they know of cases where the warranty has been honoured regardless, I realise this might vary from country to country).
Unless the phone has physical damage as opposed to the NAND simply being scrambled beyond all recognition which normally happens when a flash goes wrong like that, you'd probably expect it to be JTAG'able.
If it's not, as I said in my PP, a board from a 'donor' phone would be much cheaper to both buy/have installed than paying a Samsung authorised repairer to put a new MB in (apparently they charge in the vicinity of half what a new phone would cost retail).
Edit - Re: getting a 'donor' phone for the MB, here's an example of what I'm talking about; no doubt you'll probably pick one up cheaper, just thought I'd give you an example of what to look for if you end up needing to go down that path.
rsr1 said:
-SNIP-
I'm trying to get in touch with a place that does JTAG repairs at the moment, however im just scared they say it can't be done. Havent really got the money to fork out for a new MB. I bought the phone second hand last year (april) where i was told it was only 3-4weeks old however had no old purchase details. Is there any way for me to check if the warranty is still valid or does it become void after resale? Thanks
Click to expand...
Click to collapse
MistahBungle said:
There used to be an online warranty checker on one of Samsung's regional websites (can't remember which, maybe someone else does ?) where you could put the serial number in & get the warranty end date, but I recall people on here saying it either went away or didn't work anymore at some point last year.
But I doubt you'd get warranty service without the original receipt anyway, and even if you had it, I'm not sure the warranty is transferable beyond the original purchaser (Someone else please correct me if they know of cases where the warranty has been honoured regardless, I realise this might vary from country to country).
Unless the phone has physical damage as opposed to the NAND simply being scrambled beyond all recognition which normally happens when a flash goes wrong like that, you'd probably expect it to be JTAG'able.
If it's not, as I said in my PP, a board from a 'donor' phone would be much cheaper to both buy/have installed than paying a Samsung authorised repairer to put a new MB in (apparently they charge in the vicinity of half what a new phone would cost retail).
Edit - Re: getting a 'donor' phone for the MB, here's an example of what I'm talking about; no doubt you'll probably pick one up cheaper, just thought I'd give you an example of what to look for if you end up needing to go down that path.
Click to expand...
Click to collapse
I think you're right on that one, if i don't even have proof of purchase then I don't think warranty will be valid. Thanks anyway on that behalf. Yeah it is only that one issue nothing else is wrong physically so i am hoping for the best and do believe a JTAG should get me out of this situation without a problem (fingers crossed).
On the topic of a replacement motherboard thank you very much for pointing me in the right direction if JTAG fails. Buying a cheap phone as such is a great idea and taking a working motherboard for a lot cheaper than RRP is wonderful.
Thankyou very much for your input & help ::highfive:
I have the EXACT same problem...
the ivelstre
Simmyen said:
I have the EXACT same problem...
Click to expand...
Click to collapse
It happened to both of us whilst installing JellyBam v5, so surely there must be a problem with the ROM? We encountered the exact same issue 100% and are both left in the same position now due to the ROM
rsr1 said:
It happened to both of us whilst installing JellyBam v5, so surely there must be a problem with the ROM? We encountered the exact same issue 100% and are both left in the same position now due to the ROM
Click to expand...
Click to collapse
I have the exact same problem yeah, but i know a friend of mine who used the same ROM as we did.. it worked for him though
Always try a Jig before JTAG, no harm there.
If warrantu isn't voided, make sure it's really bricked so you can claim it with the "I was updating it via wifi and dropped dead" rutine.
No probs. Just sorry we couldn't be of more help. Best of luck (Hope it ends up being easily JTAG'able for you).
rsr1 said:
-SNIP-
Thankyou very much for your input & help ::highfive:
Click to expand...
Click to collapse
Hello!
I really hope you guys can help me. I tried to flash a recovery with Odin, and now my phone won't do anything. Its screen stays black, regardless of whether I try to turn it on, or go to recovery or download mode.
Here's some background as to what I did and what I was trying to do:
I had CheckROM RevoHD V6 with CWM Recovery (v5 I think) on my phone.
I wanted to install Cyanogenmod v 10.1.3-RC2.
I followed this guide: http://wiki.cyanogenmod.org/w/Install_CM_for_i9100
However I couldn't get Heimdall to work, so I got Odin v3.07.
I used this guide with the supplied PIT file (this may have done me in).
In the attachments you can see the Odin output.
I waited a good 4-5 minutes, but my mobile wasn't restarting or anything, so I disconnected it, but couldn't get it to boot.
And as I've said before, now I only see a black screen, regardless of the buttons I push. I've tried removing and then replacing the battery, but still doesn't work.
I've read that the USB-JIG is the last resort, but that you need to at least have the screen turn on and display a logo for it to work. Is this true, or can I still in my phone's state of brokeness use it?
And if I can use a jig, this one would be a good one to get, right?
Thanks for any help!
Jig has a 0.000000000000000000000001% chance of working, but try it anyway. If you can afford to be without your phone for as long as the jig takes to arrive, try it, but if you want it fixed sooner than later - service centre. You don't flash PIT's. Ever. This is most likely the cause of your busted phone.
Yeah. PIT is the cause of most phone bricks. I don't want to lead somebody to misinformation, but I heard that you use PIT file only for 3-file stock software when you want to start again with clear fully wiped phone. This is the only situation I heard when PIT file is used.
About your problem. You can buy USB JIG. Like the user above has mentioned you have really low chances to get it working. Your last resort in this case is to try and leave the phone on warranty in samsung repair service. Many people suggest that you should say that your phone turned off during update with Samsung KIES software and has never turned on again even though it has been written on your computer screen that installation has completed succesfully. This might help and they will replace motherboard for free. If not buy new phone. Anyway be patient and wait for more answers.
Dammit. Well thanks for the replies and tips. I hope there is someone who has another tip.
The reason I went with the PIT file as well is because I did it the first time around, flashing the first recovery. So I thought it wouldn't harm this time.
No miracle fixes. If the phone won't even bootloop, you've got zero chance of fixing it yourself. It's unlikely to even be JTAG'able. A Samsung service centre certainly wouldn't attempt one given a motherboard replacement is quicker/easier for them to do (not to mention they make a nice profit margin on the labour/parts). Having mentioned motherboards, you could also source a 2nd hand one from a 'donor' phone with a broken screen & either replace it yourself or pay a local mobile repair shop to do it (will be cheaper than paying a service centre to put a new one in).
Also, if you're lucky, service centre may not notice or care that you've been messing with it/you broke it & might fix it under warranty. Tho anyone here who tells you that's a certainty is lying to you. It's a crap shoot, you might get it, you might not. Obviously if you have no warranty that's irrelevant.
Damn. I was afraid of this. I've contacted Samsung support, but I'm pretty sure they won't do anything since I'm 3 months out of guarantee.
And now I'm looking for replacements as well.
Always seems to be the way unfortunately (this kind of thing happening just after warranty expires). If you've had the phone a while (e.g since it was released), yeah, maybe a new phone might not be a bad idea. But still, get the jig, try it, see what happens. Nothing to lose except a couple of bucks for the jig.
Thanks. Will do, since it's only 4€. And it might come in handy if I replace my phone with an S3, S4 or Note 2.
I feel your pain. I did the exact same thing earlier this year. I didn't think I was still covered by the warranty but when I took it in to the service center they fixed it for free even replacing the main board (I think). Your as well to take it in on the off chance their record still show it as under warranty.
Thanks for the support. Unfortunately the service centre is not close to me, so I'm awaiting a reply from Samsung support and hope they allow me to send it to them.
At least I was just smart enough to make a backup of the files before. So nothing lost on that end, I can get all my contacts, messages, etc. back.
I unplugged the phone while flashing kernel and now the phone is fully bricked. wont turn on, can't access recovery mode or download mode.only thing it does is gets a bit hot when the battery is in or when charger is plugged in. I've read something about a USB Jig. and some people say it works (can fix a hard bricked phone) and some people say it doesn't, so does it work or not ? can anyone confirm this ?if it doesnt, what should I do to fix it ?
Nope. I can almost guarantee a jig will not work (but if you can get hold of one, try it anyway. You might end up being the person with the 'golden ticket').
Besides, it won't 'fix a phone' even if it 'works' (you thinking it will is probably indicative of why/how the phone became bricked in the first place). All it will do is put the phone in download mode which theoretically allows you to flash a stock rom which fixes the phone.
Which as I said is a moot point in this case because it won't work.
It might be JTAG'able, though this is probably a longshot as well. Most likely scenario is a motherboard replacement; either a new one by a Samsung service centre (most expensive option), or a second hand one sourced from a 'donor'/broken phone which you either swap yourself or pay a local mobile repair shop to swap (cheaper option).
NEVER UNPLUG PHONE WHILE FLASHING ! You will instantly end up with a hard brick.
strange mine was flashing to stock when it suddenly got unplugged (loose usb port) but it was okay until i rebooted, he must've flashed it with a wrong firmware
my suggestions is have it JTAGged, however I recommend what MistahBungle said too I had the same experience not too long ago, I flashed it with an incompatible firmware and it went dead, I ordered the usb jig 4 days ago but it still too far to go and I needed the phone for work, I went to the repair shop nearby (not samsung) and they said they can fix it for $20 (rush) $14 if not (but could take days before you can get it) so you can choose anyways just hope that you don't have a corrupt NAND or a motherboard replacement. Heads up and hope for the best
thewrwhbio
dark_blitz said:
strange mine was flashing to stock when it suddenly got unplugged (loose usb port) but it was okay until i rebooted, he must've flashed it with a wrong firmware
my suggestions is have it JTAGged, however I recommend what MistahBungle said too I had the same experience not too long ago, I flashed it with an incompatible firmware and it went dead, I ordered the usb jig 4 days ago but it still too far to go and I needed the phone for work, I went to the repair shop nearby (not samsung) and they said they can fix it for $20 (rush) $14 if not (but could take days before you can get it) so you can choose anyways just hope that you don't have a corrupt NAND or a motherboard replacement. Heads up and hope for the best
Click to expand...
Click to collapse
YES I flashed it with a wrong firmware. On"about phone" screen, it shows I9100G. so I thought the device was I9100G which is different from I9100, but when I looked at the back, I9100M !!! and I9100 and I9100M have the same hardware.......
MistahBungle said:
Nope. I can almost guarantee a jig will not work (but if you can get hold of one, try it anyway. You might end up being the person with the 'golden ticket').
Besides, it won't 'fix a phone' even if it 'works' (you thinking it will is probably indicative of why/how the phone became bricked in the first place). All it will do is put the phone in download mode which theoretically allows you to flash a stock rom which fixes the phone.
Which as I said is a moot point in this case because it won't work.
It might be JTAG'able, though this is probably a longshot as well. Most likely scenario is a motherboard replacement; either a new one by a Samsung service centre (most expensive option), or a second hand one sourced from a 'donor'/broken phone which you either swap yourself or pay a local mobile repair shop to swap (cheaper option).
Click to expand...
Click to collapse
I just contacted Samsung and they said the phone is not under warranty, so get it JTAGed is my only option. and what do you mean by "It MIGHT be JATable" ? might be ?? Are there still chances that it can't be JTAGed ??? XD
Yep. Not all phones like this can be JTAG'd. Sometimes the NAND is so messed up not even a low level operation like a JTAG is possible. In these cases a motherboard replacement is the only fix.