Hello,
Yesterday, when trying to create a backup of my current ROM (original, factory ROM) it seems that after the backup process was finished, when I tried to reboot my phone it would go directly into cwm recovery instead of starting up normally. This happens every time I try to reboot the phone. I have a Samsung Exhibit sgh-t599n (metro pcs).
Other things that may be revelant to my problem: the backup was not successful (there was a message saying something about an image not being copied). Also, in the cwm recovery menu there is a warning that says "No file_contexts".
I would appreciate any help you could give me.
Thank you
vascotto said:
Hello,
Yesterday, when trying to create a backup of my current ROM (original, factory ROM) it seems that after the backup process was finished, when I tried to reboot my phone it would go directly into cwm recovery instead of starting up normally. This happens every time I try to reboot the phone. I have a Samsung Exhibit sgh-t599n (metro pcs).
Other things that may be revelant to my problem: the backup was not successful (there was a message saying something about an image not being copied). Also, in the cwm recovery menu there is a warning that says "No file_contexts".
I would appreciate any help you could give me.
Thank you
Click to expand...
Click to collapse
Can you boot into download mode? If so try using odin to reflash the recovery.
Droid Premium said:
Can you boot into download mode? If so try using odin to reflash the recovery.
Click to expand...
Click to collapse
I apologize for my ignorance, but how do you do that?
vascotto said:
I apologize for my ignorance, but how do you do that?
Click to expand...
Click to collapse
I don't know much about your device so tell me exactly how you rooted and installed your recovery.
Droid Premium said:
I don't know much about your device so tell me exactly how you rooted and installed your recovery.
Click to expand...
Click to collapse
I rooted my phone using Impactor. The recovery (cwm) was installed by using Odin (going into download mode and using Oding to download cwm into my phone).
Thanks
vascotto said:
I rooted my phone using Impactor. The recovery (cwm) was installed by using Odin (going into download mode and using Oding to download cwm into my phone).
Thanks
Click to expand...
Click to collapse
Okay so you do know how to get into Odin. Try flashing a different custom recovery. Also make sure the one you are using is made for your device. There aren't any recoveries that are universal with 1 file. Just make sure the one you are using is for your phone!
Droid Premium said:
Okay so you do know how to get into Odin. Try flashing a different custom recovery. Also make sure the one you are using is made for your device. There aren't any recoveries that are universal with 1 file. Just make sure the one you are using is for your phone!
Click to expand...
Click to collapse
But in order to reflash do I have to take the same steps that I took for flashing cwm or do I have to do something different (delete cache, reformat phone, etc.). Sorry for the insistence.
vascotto said:
But in order to reflash do I have to take the same steps that I took for flashing cwm or do I have to do something different (delete cache, reformat phone, etc.). Sorry for the insistence.
Click to expand...
Click to collapse
I don't do much with odin since i dont ever have any issues with my recovery but all you should have to do is install the recovery just like you did the first time. Also if you are following a guide to do this make sure you are checking the right options!
Also not all odins are compatible with all devices. Make sure the odin you are using is for your device!
Droid Premium said:
I don't do much with odin since i dont ever have any issues with my recovery but all you should have to do is install the recovery just like you did the first time. Also if you are following a guide to do this make sure you are checking the right options!
Also not all odins are compatible with all devices. Make sure the odin you are using is for your device!
Click to expand...
Click to collapse
I tried reflashing cwm (one compatible with my phone) by using odin (also compatible), but the phone keeps booting to cwm recovery every time I turn it on/reboot. Any other suggestions?
vascotto said:
I tried reflashing cwm (one compatible with my phone) by using odin (also compatible), but the phone keeps booting to cwm recovery every time I turn it on/reboot. Any other suggestions?
Click to expand...
Click to collapse
Use usb mass storage to mount your Sd card to your computer and transfer either a stock ROM or a custom ROM to your device. Flash it and let me know what happens.
Droid Premium said:
Use usb mass storage to mount your Sd card to your computer and transfer either a stock ROM or a custom ROM to your device. Flash it and let me know what happens.
Click to expand...
Click to collapse
What do I need to mount the sd card to my pc?
Thank you for your help and apologies for bothering you so much.
-I was able to flash a custom ROM (compatible, PAC rom); however, the problem persists. Every time I boot the phone it takes me directly to cwm recovery.
I was able to find these instructions (thanks to thereal_big jake from androidarea51.com) for solving a problem very similar to mine:
1.Flash Stock Recovery in Odin Link
2. Factory Reset in Stock Recovery
3. Flash CWM in Odin
4. Now Flash your Rom or Backup
5. Reboot
Could somebody explain how to flash the stock recovery with odin in my phone (samsung exhibit sgh t599n).
Thanks
vascotto said:
I was able to find these instructions (thanks to thereal_big jake from androidarea51.com) for solving a problem very similar to mine:
1.Flash Stock Recovery in Odin Link
2. Factory Reset in Stock Recovery
3. Flash CWM in Odin
4. Now Flash your Rom or Backup
5. Reboot
Could somebody explain how to flash the stock recovery with odin in my phone (samsung exhibit sgh t599n).
Thanks
Click to expand...
Click to collapse
Oh i see your complete issue now. Just grab the stock recovery .tar and flash it in odin just like you did the custom recovery. Factory reset and you should be good to go.
Droid Premium said:
Oh i see your complete issue now. Just grab the stock recovery .tar and flash it in odin just like you did the custom recovery. Factory reset and you should be good to go.
Click to expand...
Click to collapse
Thanks man! You've been a really big help.
Cheers
Droid Premium said:
Oh i see your complete issue now. Just grab the stock recovery .tar and flash it in odin just like you did the custom recovery. Factory reset and you should be good to go.
Click to expand...
Click to collapse
Hey,
Just wanted to let you know that it worked. Thank you for helping me (and bearing with all my questions)
Regards
vascotto said:
Hey,
Just wanted to let you know that it worked. Thank you for helping me (and bearing with all my questions)
Regards
Click to expand...
Click to collapse
You're more than welcome! If you have any other questions about anything feel free to PM me or tag me in a thread post! Good luck with your phone!
Related
Hi all,
I have a i9100P (with NFC) and it is stuck at the boot screen with the yellow triangle after I installed CWM using this method here:
galaxys2root (DOT) com/galaxy-s2-root/how-to-install-clockworkmod-recovery-on-rooted-galaxy-s2-i9100/
I can still enter Download mode and even the installed CWM, but i cannot boot into android, its just stuck on the screen
I have searched on the internet for a solution, and i cannot find a solution for this
would installing a new ROM via an SD card work? What shall i do?
HELP me PLS!!
thanks in advance!!!!
Carlover1998 said:
Hi all,
I have a i9100P (with NFC) and it is stuck at the boot screen with the yellow triangle after I installed CWM using this method here:
galaxys2root (DOT) com/galaxy-s2-root/how-to-install-clockworkmod-recovery-on-rooted-galaxy-s2-i9100/
I can still enter Download mode and even the installed CWM, but i cannot boot into android, its just stuck on the screen
I have searched on the internet for a solution, and i cannot find a solution for this
would installing a new ROM via an SD card work? What shall i do?
HELP me PLS!!
thanks in advance!!!!
Click to expand...
Click to collapse
Quote taken from site:
Galaxy S2 Reference
You will need a rooted Galaxy S2 to install all ROM/kernels.
NOTE: PLEASE ONLY INSTALL ROMS INTENDED FOR YOUR VERSION OF Galaxy S2! Otherwise you WILL BRICK YOUR PHONE and I will not be responsible! ALL ROMs on this site are ONLY for Verizon Galaxy S2!
First time to rooting and custom ROMs?
Please see our FAQ for your Galaxy S2 model FIRST!!!:
Click to expand...
Click to collapse
I wouldn't have tried this as your phone is i9100P, although I know the difference isn't that big.
Also, was your phone rooted? It had to have been rooted beforehand.
oddlyshapedstickman said:
Quote taken from site:
I wouldn't have tried this as your phone is i9100P, although I know the difference isn't that big.
Also, was your phone rooted? It had to have been rooted beforehand.
Click to expand...
Click to collapse
Hi, yes it was rooted prior to this, but i thought the only difference was that the P version had NFC - but now it seems I am stuck at the boot screen - any ideas? I would appreciate it a lot!
Flash your stock ROM and check it it works.
Stileth said:
Flash your stock ROM and check it it works.
Click to expand...
Click to collapse
Hi, thanks for the reply - i will try flashing it after i finish downloading it. I presume I will have to do the usual wipe data, clear cache etc?
"I searched all over the internet and couldnt find a solution"
Biggest load of crap Ive read on here.
Sent from my GT-I9100 using xda premium
Carlover1998 said:
Hi, thanks for the reply - i will try flashing it after i finish downloading it. I presume I will have to do the usual wipe data, clear cache etc?
Click to expand...
Click to collapse
Yes, that should help. Btw what version you are downloading? 4.0.3 or 4.0.4?
Stileth said:
Yes, that should help. Btw what version you are downloading? 4.0.3 or 4.0.4?
Click to expand...
Click to collapse
I am downloading 4.0.3 from here: devsrom4android.blogspot (DOT)co (DOT) uk/2012/06/i9100pxxlph-o2-uk-samsung-galaxy-s2-gt.html
4.0.3 is what I previously had, and I believe that was the exact firmware I had on the phone (o2 NFC version)
Carlover1998 said:
I am downloading 4.0.3 from here: devsrom4android.blogspot (DOT)co (DOT) uk/2012/06/i9100pxxlph-o2-uk-samsung-galaxy-s2-gt.html
4.0.3 is what I previously had, and I believe that was the exact firmware I had on the phone (o2 NFC version)
Click to expand...
Click to collapse
That's your problem. You were on 4.0.3, which is ICS.
The instructions at galaxys2root.com/galaxy-s2-root/how-to-install-clockworkmod-recovery-on-rooted-galaxy-s2-i9100/ don't specify, but they are for Gingerbread ONLY. The recovery kernel contained within that zip package is ClockworkMod Recovery 4.0.1.4, which is for Gingerbread.
This thread (http://forum.xda-developers.com/showthread.php?t=1118693) is the updated version of that recovery kernel for ICS.
You don't have to flash the full firmware, just flash a kernel that is meant to work with ICS and you should be fine.
ctomgee said:
That's your problem. You were on 4.0.3, which is ICS.
The instructions at galaxys2root.com/galaxy-s2-root/how-to-install-clockworkmod-recovery-on-rooted-galaxy-s2-i9100/ don't specify, but they are for Gingerbread ONLY. The recovery kernel contained within that zip package is ClockworkMod Recovery 4.0.1.4, which is for Gingerbread.
This thread (http://forum.xda-developers.com/showthread.php?t=1118693) is the updated version of that recovery kernel for ICS.
You don't have to flash the full firmware, just flash a kernel that is meant to work with ICS and you should be fine.
Click to expand...
Click to collapse
Thanks for the advice - but i already have the stock ROM on an SD card so i think i will flash this. Problem is i cannot get CWM to read from the external SD card, so i cannot locate the zip and install it - help?
EDIT: if i install the kernel you gave me the link to ([KERNEL][ICS] ClockworkMod Recovery 5.5.0.4) , will it remove the root access i had?
EDIT 2: I have just flashed the kernel via odin, and it finally got past the screen with the yellow triangle! However, it is now stuck on the second screen which shows the 'S' logo with the words 'Samsung Galaxy SII' under it. Any more ideas?
Carlover1998 said:
Thanks for the advice - but i already have the stock ROM on an SD card so i think i will flash this. Problem is i cannot get CWM to read from the external SD card, so i cannot locate the zip and install it - help?
EDIT: if i install the kernel you gave me the link to ([KERNEL][ICS] ClockworkMod Recovery 5.5.0.4) , will it remove the root access i had?
EDIT 2: I have just flashed the kernel via odin, and it finally got past the screen with the yellow triangle! However, it is now stuck on the second screen which shows the 'S' logo with the words 'Samsung Galaxy SII' under it. Any more ideas?
Click to expand...
Click to collapse
Can you boot to recovery? If so, you can try a factory reset/wipe data. You'll lose all your data, (not counting pictures/media) but at this point, do you have anything to lose?
ctomgee said:
Can you boot to recovery? If so, you can try a factory reset/wipe data. You'll lose all your data, (not counting pictures/media) but at this point, do you have anything to lose?
Click to expand...
Click to collapse
I just tried that, i can boot into the new cwm - have nothing to lose since i've only had it for about 3 days - however even after the wipe data, cache and dalvik it is still stuck on the 'S' screen now
Carlover1998 said:
I just tried that, i can boot into the new cwm - have nothing to lose since i've only had it for about 3 days - however even after the wipe data, cache and dalvik it is still stuck on the 'S' screen now
Click to expand...
Click to collapse
Well, now I'd say you need to flash a full firmware. You said you downloaded I9100PXXLPH from here? Should work. But you'll no longer be rooted, and you won't have CWM recovery.
How did you get into this in the first place? You wanted CWM recovery?
ctomgee said:
Well, now I'd say you need to flash a full firmware. You said you downloaded I9100PXXLPH from here? Should work. But you'll no longer be rooted, and you won't have CWM recovery.
How did you get into this in the first place? You wanted CWM recovery?
Click to expand...
Click to collapse
I will be sure to try that, and basically earlier today i rooted it successfully, and then i had to get CWM onto it so i could start flashing new ROMs etc, and i tried installing CWM via that method that has now caused all of this
Never the less i will try your suggestion, so should i basically mount usb from CWM, then copy the firmware over to the phone, unmount, and then wipe, and then flash it finally?
EDIT: it wont allow me to mount USB in CWM
can i just flash the ZIP using odin in download mode, or does it have to be a .tar file?
Carlover1998 said:
I will be sure to try that, and basically earlier today i rooted it successfully, and then i had to get CWM onto it so i could start flashing new ROMs etc, and i tried installing CWM via that method that has now caused all of this
Never the less i will try your suggestion, so should i basically mount usb from CWM, then copy the firmware over to the phone, unmount, and then wipe, and then flash it finally?
Click to expand...
Click to collapse
No. That download is for a package that must be flashed while the phone is in download mode. That will require you to use a computer, and a flashing tool, such as Odin or Heimdall.
ctomgee said:
No. That download is for a package that must be flashed while the phone is in download mode. That will require you to use a computer, and a flashing tool, such as Odin or Heimdall.
Click to expand...
Click to collapse
How would I go about flashing it in download mode, i really have no idea as I don't think you can flash zip files in odin, forgive me for all of the questions I really appreciate your help!
EDIT: I have unzipped the file and hooray lies in it the .tar.md5 file! I am in the middle of flashing this and will report back on results
Thanks a lot guys!!
THANKS GUYS FOR ALL OF YOUR HELP, my SII is now working fully again! Cheers to all that helped, flashing the stock firmware worked with wipe/cache
Can't thank you enough!
Last thing if you don't mind, i want to root it again using this: (http://forum.xda-developers.com/showthread.php?t=1321582)
Now after that, how can i install CWM without getting into the mess i got into today? cheers!
Nope, I think that's for GB. For easy root use method 1 from 1st guide in my signature.
Stileth said:
Nope, I think that's for GB. For easy root use method 1 from 1st guide in my signature.
Click to expand...
Click to collapse
But it appears that this will not give you permanent CWM recovery. Which is what I think he wants.
ctomgee said:
But it appears that this will not give you permanent CWM recovery. Which is what I think he wants.
Click to expand...
Click to collapse
Well I think Chainfire's CF-Root kernels (http://forum.xda-developers.com/showthread.php?t=1103399) are not for i9100P, so not sure if he can achieve permanent CWM recovery. Anyway if he don't plan to flash every hour new ROM he should be fine with latest temporary CWM 6: http://forum.xda-developers.com/showthread.php?t=1840223 although will ask Phil about compatibility.
OK so Im on AOKP milestone 6 with the devil kernel and i went in to recovery to wipe cache and dalvik cache and when i pressed reboot system it goes back to recovery!!!! please help as I really don't want to reflash everything!!! Thanks.
I had this same problem until I flashed TWRP. When I rebooted, it instead loaded the OS, but it still had Devil Recovery. WTF?
Have you tried re-flashing the rom without wiping data?
Sent from my SCH-I500 using xda premium
I can't flash anything because i can't put anything on the sd card because i cant get out of recovery!
ThePlasticBling said:
I can't flash anything because i can't put anything on the sd card because i cant get out of recovery!
Click to expand...
Click to collapse
i have the same problem i cant get out of recovery, cause the rom i flashed is all screwed up
android_noob01 said:
i have the same problem i cant get out of recovery, cause the rom i flashed is all screwed up
Click to expand...
Click to collapse
Try flashing CWM recovery again using Heimdall or Odin. Once it boots into recovery, flash TWRP or another recovery of your choice, then reboot and hopefully you will see your boot animation. That's what I did to get AOKP build 40 to boot again (though strangely enough, it's stuck with Devil recovery even after flashing TWRP). Hope this helps you guys out. And be sure to make backups!
UndeadSquirrel said:
Try flashing CWM recovery again using Heimdall or Odin. Once it boots into recovery, flash TWRP or another recovery of your choice, then reboot and hopefully you will see your boot animation. That's what I did to get AOKP build 40 to boot again (though strangely enough, it's stuck with Devil recovery even after flashing TWRP). Hope this helps you guys out. And be sure to make backups!
Click to expand...
Click to collapse
Again, how can i put twrp on my sd card if i'm stuck in recovery? Is there a link for an odin version of twrp
You should be able to mount your SD card in recovery anyway. If not, take it out and insert it into an adapter to plug into your computer. I don't know if there's an Odin version of TWRP, I flashed it in CWM recovery.
I would read droid styles guide first if you have not yet as it has all the answers you will need. You just need to read through it and following the directions.
Sent from my SCH-R530U
how do i mount my sd card and open it on my pc in recovery?
If you're using CWM, it's under Advanced or Mounts and Storage. Plug in the USB cable like you normally would.
UndeadSquirrel said:
If you're using CWM, it's under Advanced or Mounts and Storage. Plug in the USB cable like you normally would.
Click to expand...
Click to collapse
I try to install twrp but it says installation aborted. I'm really starting to get sick of this phone and its stability issues.
You got the zip, right? It's in the Fascinate development section of the forums.
There is nothing wrong with the phone. I don't understand why you can't just Odin back to stock and start over. With the amount of time you have been stuck in recovery you could have fixed it by now. It you could follow droid styles guide to get out of the recovery loop without going back to stock. Something tells me you really just want a new phone...am I close???
Sent from my SCH-R530U
shelby04861 said:
There is nothing wrong with the phone. I don't understand why you can't just Odin back to stock and start over. With the amount of time you have been stuck in recovery you could have fixed it by now. It you could follow droid styles guide to get out of the recovery loop without going back to stock. Something tells me you really just want a new phone...am I close???
Sent from my SCH-R530U
Click to expand...
Click to collapse
Sent from my SCH-R530U
Don't you belong in a different section?
Anyway, sorry for getting snippy, I was just really tired and frustrated. I did use the .zip from the forums.
If you've already tried Heimdall-flashing CWM again, and that didn't work, then I suggest you Odin back to stock as shelby suggested. If you haven't made a nandroid already, do so, then revert back to stock and start from scratch. You can try restoring your nandroid once you're no longer stuck in recovery.
ThePlasticBling said:
Sent from my SCH-R530U
Don't you belong in a different section?
Anyway, sorry for getting snippy, I was just really tired and frustrated. I did use the .zip from the forums.
Click to expand...
Click to collapse
I have a mez and I just got the sgs3 a little while ago. You need to check out section 8 or 9 I think of the guide. It tells you exactly how to get out of your situation.
Sent from my SCH-I500 using Tapatalk 2
There's also a topic about the "three-finger recovery boot loop" fix. You could try that.
Hi Mates - i need help.
I just rooted my Galaxy S3 (i9300) and after it restarted, all i can see is just pure black screen.
- Prior to Rooting, here's my phone status:
Official Stock 4.1.2 Official Firmware
Never been rooted prior to this incident
What i used:
Odin 1.85
CF-Insecure-SGS3_XX_NEE_ALE8-v1.2
Can someone please help me?
Sometimes it doesn t get rooted. Check if you can boot into recovery or not by using button combo.
Post in General section.
caloyskii23 said:
Hi Mates - i need help.
I just rooted my Galaxy S3 (i9300) and after it restarted, all i can see is just pure black screen.
- Prior to Rooting, here's my phone status:
Official Stock 4.1.2 Official Firmware
Never been rooted prior to this incident
What i used:
Odin 1.85
CF-Insecure-SGS3_XX_NEE_ALE8-v1.2
Can someone please help me?
Click to expand...
Click to collapse
1st thing is this should be in QA section not development section
Right can odin still see/connect to your phone? Can u still enter recovery etc?
http://forum.xda-developers.com/showthread.php?t=1695238
Re-downloading and flash cf.root 6.4, everything will be fine.
SwiftSmoke said:
1st thing is this should be in QA section not development section
Right can odin still see/connect to your phone? Can u still enter recovery etc?
Click to expand...
Click to collapse
yes, i can detect my phone, mate. need help please..
misacek said:
http://forum.xda-developers.com/showthread.php?t=1695238
Re-downloading and flash cf.root 6.4, everything will be fine.
Click to expand...
Click to collapse
after downloading cf.root 6.4 and flashing it via odin, still shows black screen.
Question - considering that i have flashed cf.root 6.4, will the procedure below brick my phone?
- install CWM 6.0.3.1
- reboot into CWM recovery
- install custom rom
Please advise me, mates...
caloyskii23 said:
after downloading cf.root 6.4 and flashing it via odin, still shows black screen.
Question - considering that i have flashed cf.root 6.4, will the procedure below brick my phone?
- install CWM 6.0.3.1
- reboot into CWM recovery
- install custom rom
Please advise me, mates...
Click to expand...
Click to collapse
You cannot install CWM recovery unless you root your phone. . Did you try going to recovery using button combo?? Sometimes, if roots after you manually go into recovery.
If not done, download Galaxy S3 unified toolkit and root using that.
caloyskii23 said:
after downloading cf.root 6.4 and flashing it via odin, still shows black screen.
Question - considering that i have flashed cf.root 6.4, will the procedure below brick my phone?
- install CWM 6.0.3.1
- reboot into CWM recovery
- install custom rom
Please advise me, mates...
Click to expand...
Click to collapse
If the cf root procedure was successful I wouldn't worry about installing a diff recovery just yet, lets get the phone booting 1st. Download a custom rom and get it moved onto your external sd card, Boot into recovery(from power off, press volume up, home button and power), make sure its custom and not default. Then install the custom rom zip and reboot it should hopefully fully reboot. then look into installing a newer custom recovery.
dhirend_6d said:
You cannot install CWM recovery unless you root your phone. . Did you try going to recovery using button combo?? Sometimes, if roots after you manually go into recovery.
If not done, download Galaxy S3 unified toolkit and root using that.
Click to expand...
Click to collapse
when you say button combo, that's VOLUME UP+HOME+ POWER, right? if so, yes, i can go to recovery mode, hirend_6d.
dhirend_6d said:
You cannot install CWM recovery unless you root your phone. . Did you try going to recovery using button combo?? Sometimes, if roots after you manually go into recovery.
If not done, download Galaxy S3 unified toolkit and root using that.
Click to expand...
Click to collapse
SwiftSmoke said:
If the cf root procedure was successful I wouldn't worry about installing a diff recovery just yet, lets get the phone booting 1st. Download a custom rom and get it moved onto your external sd card, Boot into recovery(from power off, press volume up, home button and power), make sure its custom and not default. Then install the custom rom zip and reboot it should hopefully fully reboot. then look into installing a newer custom recovery.
Click to expand...
Click to collapse
in odin, it showed that the root procedure was successful. not sure if i got your correctly, mate. so you mean i can go into recovery mode and flash custom rom?
dhirend_6d said:
You cannot install CWM recovery unless you root your phone. . Did you try going to recovery using button combo?? Sometimes, if roots after you manually go into recovery.
If not done, download Galaxy S3 unified toolkit and root using that.
Click to expand...
Click to collapse
no..! you can flash CWM recovery even though the phone is not rooted! for sure! after flashing CWM recovery we can root the phone by flashing superuser.zip! i've done this many times!
caloyskii23 said:
in odin, it showed that the root procedure was successful. not sure if i got your correctly, mate. so you mean i can go into recovery mode and flash custom rom?
Click to expand...
Click to collapse
If the recovery has been updated to the custom CWM recovery then yes you could flash a rom which will come with root and super user. But it must be the custom recovery if your still on the stock recovery u couldn't flash a custom rom.
caloyskii23 said:
when you say button combo, that's VOLUME UP+HOME+ POWER, right? if so, yes, i can go to recovery mode, hirend_6d.
Click to expand...
Click to collapse
Ohk, is the recovery stock recovery or custom (CWM) recovery. Anyways, try to wipe data and cache and boot. If not successful, install a custom ROM. But make sure the recovery is CWM recovery.
dhirend_6d said:
Ohk, is the recovery stock recovery or custom (CWM) recovery. Anyways, try to wipe data and cache and boot. If not successful, install a custom ROM. But make sure the recovery is CWM recovery.
Click to expand...
Click to collapse
how would i know if it's custom recovery? any sign that will tell me that?
're super SU apk.v phone? Icon?
---------- Post added at 05:39 PM ---------- Previous post was at 05:37 PM ----------
here cwm
http://forum.xda-developers.com/showthread.php?t=2002953
misacek said:
're super SU apk.v phone? Icon?
---------- Post added at 05:39 PM ---------- Previous post was at 05:37 PM ----------
here cwm
http://forum.xda-developers.com/showthread.php?t=2002953
Click to expand...
Click to collapse
Can you ecommend a custom rom that is already rooted? i already have downloaed sentinel rom 4.6. is that rooted? tried to read the thread but i didn't see anythng that says it's rooted.
http://forum.xda-developers.com/showthread.php?t=2249984
caloyskii23 said:
Can you ecommend a custom rom that is already rooted? i already have downloaed sentinel rom 4.6. is that rooted? tried to read the thread but i didn't see anythng that says it's rooted.
http://forum.xda-developers.com/showthread.php?t=2249984
Click to expand...
Click to collapse
O__O, All custom ROMs are rooted I suppose. And yes Sentinel ROM is rooted.
dhirend_6d said:
O__O, All custom ROMs are rooted I suppose. And yes Sentinel ROM is rooted.
Click to expand...
Click to collapse
yes, saw it. its a custom rom. tried wipe data / cache but didn't work. will try to install custom rom sentinel now.
was able to install the custom rom but kept on rebooting after few minutes. it already happened thrice now.
anything i am missing?
It could be the insecure kernel you used earlier is making it unstable, probably if the custom rom doesn't install a kernel. Only thing I can think of is install an official Samsung g3 rom which should repair all the partitions that might of been damaged or corrupted, use it for a while to make sure no reboots. Then go through root and install of custom rom again. In theory creating a good foundation to install a custom rom on.
Just out of curiosity did u download an official Samsung rom before starting to flash in case u need to send it away or sell it on? If not what network/country are u using? Is the phone locked to the network or unlocked?
Edit:- I never used a kernel flash to root my phone just used cf root 6.4 to get root and custom recovery cwm. I only changed my recovery this weekend to Phil touch.
Sent from my GT-I9300 using xda premium
SwiftSmoke said:
It could be the insecure kernel you used earlier is making it unstable, probably if the custom rom doesn't install a kernel. Only thing I can think of is install an official Samsung g3 rom which should repair all the partitions that might of been damaged or corrupted, use it for a while to make sure no reboots. Then go through root and install of custom rom again. In theory creating a good foundation to install a custom rom on.
Edit:- I never used a kernel flash to root my phone just used cf root 6.4 to get root and custom recovery cwm. I only changed my recovery this weekend to Phil touch.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
hi swiftsmoke!
I tried reset and wipe 4x before i installed the rom. works perfect now!
THANK YOU SO MUCH!!!!
:good::good::good::good::good::good::good::good::good::good::good::good::good::good:
Okay so I managed to root my phone using this method ; http://forum.xda-developers.com/sho...m.xda-developers.com/showthread.php?t=2116549
And root works. Now I want to get clockworkmod on my phone. I followed some steps on the internet and ended up getting my phone bricked. I managed to get it working again. Can someone please tell me what to do right? I used odin before and that was the cause of my bricking. So i'd rather not use that again.
I went to the clockworkmod/rommanger website and i found the s2 "Download Recovery" thing. If i flash this through the android recovery system will it work?
Help me out here.
Thanks in advance
What do you mean "I want to get cwm on my phone".
That file should root your phone and install cwm.
Are you getting confused because there no icon.
Dont use rommanager as that can have dire effects on a phone.
And next time put in ALL details about your phone;model,rom etc.
xringo said:
Okay so I managed to root my phone using this method ; http://forum.xda-developers.com/sho...m.xda-developers.com/showthread.php?t=2116549
And root works. Now I want to get clockworkmod on my phone. I followed some steps on the internet and ended up getting my phone bricked. I managed to get it working again. Can someone please tell me what to do right? I used odin before and that was the cause of my bricking. So i'd rather not use that again.
I went to the clockworkmod/rommanger website and i found the s2 "Download Recovery" thing. If i flash this through the android recovery system will it work?
Help me out here.
Thanks in advance
Click to expand...
Click to collapse
If you are having official stock 4.1.2 rom then go to settings/about phone and check your baseband and then Go to philz Thread you can search it on XDA . Choose the zip one flash it from recovery you will get CWM.
Hope it helps
Sent from my iPhone using Tapatalk
theunderling said:
What do you mean "I want to get cwm on my phone".
That file should root your phone and install cwm.
Are you getting confused because there no icon.
Dont use rommanager as that can have dire effects on a phone.
And next time put in ALL details about your phone;model,rom etc.
Click to expand...
Click to collapse
I mean , when I boot into recovery its the default android recovery. Not the cwm. Not sure how to explain it but even before i rooted my phone. I had to boot into recovery, and the default android recovery screen comes when you want to flash the zip. After that I re boot into recovery the android one comes, not the cwm. So yeah the icon or the blue-ish recovery screen doesnt appear
Jeetu said:
If you are having official stock 4.1.2 rom then go to settings/about phone and check your baseband and then Go to philz Thread you can search it on XDA . Choose the zip one flash it from recovery you will get CWM.
Hope it helps
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Yes I have 4.1.2. I checked the thread out . My baseband is i9100xxms4 but the thread has only xxms1. Does that matter or?
xringo said:
I mean , when I boot into recovery its the default android recovery. Not the cwm. Not sure how to explain it but even before i rooted my phone. I had to boot into recovery, and the default android recovery screen comes when you want to flash the zip. After that I re boot into recovery the android one comes, not the cwm. So yeah the icon or the blue-ish recovery screen doesnt appear
Click to expand...
Click to collapse
Ok,I know what you mean now.That used to happen with rachmats rooting method;a temp cwm was flashed,and when rebooted,the phone went back to stock recovery.
Several people in the know recommend using pc odin(think you said you didnt want to use it) because it is risky flashing stuff by other methods.If you use odin to do stuff,then that means it is ready to help you out if flashing by cwm or mobile odin goes wrong.
theunderling said:
Ok,I know what you mean now.That used to happen with rachmats rooting method;a temp cwm was flashed,and when rebooted,the phone went back to stock recovery.
Several people in the know recommend using pc odin(think you said you didnt want to use it) because it is risky flashing stuff by other methods.If you use odin to do stuff,then that means it is ready to help you out if flashing by cwm or mobile odin goes wrong.
Click to expand...
Click to collapse
So what can I do? I dont mind flashing cwm with odin as long as I dont brick my phone again. I've already rooted, if i use odin to get cwm , will it cause problems? Is there no other way to get cwm without odin? Maybe flashing a zip?
Yes,Jeetu said earlier.
theunderling said:
Yes,Jeetu said earlier.
Click to expand...
Click to collapse
Probem is my baseband is xxms4 while the philz only has one xxms1. Will it still work?
bump
Hi, I don't understand, mobile ran so far (2 yrs) without any prob. I've been flashing and running all Temasek ROMs (4.4.4) without any issue. CWM v6.0.4.4. is installed. Yesterday, found mobile switched off and couldn't remember I switched it off, so I restarted it, and then nothing, I have the Samsung logo screen but it does not start. I can access to the CMW, but I can't do any restore, and dirty flash of ROM (still on the SD card). "reboot system now" gives me the same, stuck on samsung logo.
I do not understand. Anyone could advice me on what to try?
Many thanks
Vincent
1. A clean flash. If it still hangs:
2. Flash newest firmware with Odin. If this fails:
3. Flash a 3part-PIT with Odin.
Hi,
ok, thanks for your reply.
point No1: hoy do I perform a clean flash?
Issue now is that I can't anymore access to CMW...
Thanks
vincent
Go to step 2, follow the guide in general forum, sticky thread on how to use Odin.
ok, thx
Are Odin and USB drivers available for mac?
Thanks,
vincent
Hi, I installed Philz recovery, I can access it. One thing is when I use "power options" and choose "power off", I'm getting a message: "Root access is missing/broken. Root. THIS CAN NOT BE UNDONE" and 3 choices: No, Yes - Apply root (/system/xbin/su) and No...
anyway, when I try to install ROM, it's aborded, zip is "bad", I'll try to put on the SD card another version of the ROM.
Any suggestion?
Many thanks.
I tried a restore from SD card, it starts but at "Done 388/401Mb", I'm getting an error message: Error mounting /data! skipping format... can't mount /data!
any suggestion?
Thanks
vince
rp158 said:
1. A clean flash. If it still hangs:
2. Flash newest firmware with Odin. If this fails:
3. Flash a 3part-PIT with Odin.
Click to expand...
Click to collapse
Hi, how do I perform point No 3?
Thanks
vblanche said:
Hi, how do I perform point No 3?
Thanks
Click to expand...
Click to collapse
Before you start using pit files (which should only be performed if you know exactly what you are doing) have you tried to return to stock I see you have a mac (Odin does not work with mac) so try this software first >> http://glassechidna.com.au/heimdall/ << read all the guides on how to use first. please only use pit files as a last resort before all options have been eliminated.
Thanks, I have both pc and mac, I was trying from work on my mac, but I usually do on my pc.
ok, I'll try stock rom, should I then do a clean install (use this feature from PhilZ recovery)?
Thanks
Vince
Same happend to me.
Install adb...
Oops i forgot you can't get in recovery, so get somehow in and i'll help you with it.
Sent from my GT-I9300 using XDA Free mobile app
tallman43 said:
...have you tried to return to stock....
Click to expand...
Click to collapse
just tried, phone is stuck at 2nd samsung logo for the last 5min...
ok, it worked, I'm back to stock rom
thanks for your help.
Still I don't understand what happened, found phone off, i have done nothing, been using custom roms for a while....confused I am
If the phone runs out of battery, or just decides to instant reboot for no apparent reason, one or more partition can corrupt.
This is why an efs backup is essential and a nandroid is advised.