Hello everyone. I have NetarRom 5.2 and Dorimax kernel 8.43. When i push several times power/unlock button rom has been brick (sometimes as a push button and lock screen appears and immediately push it again, they in this moment was bricked) and i must press power button and hold him 10 seconds to reset phone, because they do not respond to any keys. How solve this bug ?? Sory for eng...
pheonix1 said:
Hello everyone. I have NetarRom 5.2 and Dorimax kernel 8.43. When i push several times power/unlock button rom has been brick (sometimes as a push button and lock screen appears and immediately push it again, they in this moment was bricked) and i must press power button and hold him 10 seconds to reset phone, because they do not respond to any keys. How solve this bug ?? Sory for eng...
Click to expand...
Click to collapse
Are you able to boot into recovery to restore a nandroid backup or reflash the rom?
Yes. Maby wrong words i use. When i dont push power button several times (unlock home button and lock power) phone runs normally. Wipe and reflash dont help... (wipe data, dalvik).
pheonix1 said:
Yes. Maby wrong words i use. When i dont push power button several times (unlock home button and lock power) phone runs normally. Wipe and reflash dont help... (wipe data, dalvik).
Click to expand...
Click to collapse
This is not bricked then bricked is when you press the power button and the phone won't turn on (hard brick) or bootloop at the boot animation (soft brick). A study brick is fixable by flashing a good ROM. A hard brick requires a professional to fix.
Your situation I believe is either a ROM or kernel bug. I think that pressing these buttons as quickly as it sounds like you are is probably causing the kernel to panic and reboot.
You should first search both of threads for the ROM and kernel you are using if they are not part of the same package for others with similar issues, there may be a patch or workaround not posted in the OP (original post) of the thread where you downloaded your ROM/kernel.
If no fixes are available, you should post on the development thread of your ROM/kernel about the bug so that they can fix it
Sent from my SGH-I757M using XDA Premium 4 mobile app
Solved. Animation ctr off had bug
Thanks for help
Related
when i press vol up and power keys together it's vibrant and turning off by do not entering flash mode. Any one please tell me correct way to hard reset ... sorry for my english
mr_muvin said:
when i press vol up and power keys together it's vibrant and turning off by do not entering flash mode. Any one please tell me correct way to hard reset ... sorry for my english
Click to expand...
Click to collapse
Press power key +vol up+ vol down together until vibrate 3 times
If you want enter flash mode:turn off the phone then hold vol down button while inserting usb cable (make sure when you insert the usb cable while hold the vol down button) until light strange colour in led
Sent from my Ultimate Sola
I have tried but no use ... i want to hard reset my phone when i press vol up+vol down+ power key together it vibrate 3 times but not give any options it's staying off ... could you explain mme more detail on it please
MUHAMMAD KHALIL said:
Press power key +vol up+ vol down together until vibrate 3 times
If you want enter flash mode:turn off the phone then hold vol down button while inserting usb cable (make sure when you insert the usb cable while hold the vol down button) until light strange colour in led
Sent from my Ultimate Sola
Click to expand...
Click to collapse
mr_muvin said:
I have tried but no use ... i want to hard reset my phone when i press vol up+vol down+ power key together it vibrate 3 times but not give any options it's staying off ... could you explain mme more detail on it please
Click to expand...
Click to collapse
I think the best is flash stock ftf file with flashtool!
i agree with Khalil last info;
prerequisites of using flashtool is the appropiate drivers and android adb connection parameter fullfilled and stock ftf file stored on you harddrive.. (i hope you have all of the above succesful) if not then search in XDA for the proper setup..
flash mode is using USB cable and mobile, mobile alone cannot go into flash mode...
sorry what are you trying to do ??? bit unclear with your theory of hard reset..
sorry for my explanation... actually yesterday onwards my phone is not turning on it's hanging on boot screen .. my friend says me do a factory reset or hard reset your phone your phone will be normal .. that's why i want to hard reset my phone. Here i saw some threads to do hard reset ... but they don't work. I know the method force shutdown and force restart .. my problem is stuck at boot screen any one know about hard reset please tell me how to do that .... thanks ...
mr_muvin said:
sorry for my explanation... actually yesterday onwards my phone is not turning on it's hanging on boot screen .. my friend says me do a factory reset or hard reset your phone your phone will be normal .. that's why i want to hard reset my phone. Here i saw some threads to do hard reset ... but they don't work. I know the method force shutdown and force restart .. my problem is stuck at boot screen any one know about hard reset please tell me how to do that .... thanks ...
Click to expand...
Click to collapse
Flash the stock ftf file with flashtool!
Sent from my Ultimate Sola
mr_muvin said:
sorry for my explanation... actually yesterday onwards my phone is not turning on it's hanging on boot screen .. my friend says me do a factory reset or hard reset your phone your phone will be normal .. that's why i want to hard reset my phone. Here i saw some threads to do hard reset ... but they don't work. I know the method force shutdown and force restart .. my problem is stuck at boot screen any one know about hard reset please tell me how to do that .... thanks ...
Click to expand...
Click to collapse
buoy you will have to flash the ftf file using flashtool as mentioned by KHALIL................ It will install a fresh stock rom on your device...........
If:
-Bootloader is locked: Repair phone using SUS phone repair. Since you can get boot animation, getting into flashboot is not a problem.
-Bootloader is unlocked: Repair phone using flashtool. Flash any ICS stock ftf file using flashtool.
is flashing diiferent version can fix certain bug?
im running europe version ics on my sola.my problem is my battery %.ive done a lot of tutorials.but nothing happens.should i flash an indian version?
here's my problem,
my phone keeps on restarting whenever i reboot it.
ive tried full wipe, wipe partition and wipe dalvik cache.
ive also tried flashing custom rom via cwm and stock rom in odin which is I9100XWLS8_I9100FOPLS3_FOP
in cwm, power button isn't working..
when trying to choose a zip file, pressing power button
isn't working but touch function works well.
in odin just flashed stock rom this morning, but when it tries to boot, same problem occurs, it keeps on restarting..
i hope someone could help me ..
What you have, is a bootloop, which occurs when you don't do a full wipe before flashing a new rom..
And maybe the cwm you use doesn't support the clicking of the power button..
hezokulet said:
here's my problem,
my phone keeps on restarting whenever i reboot it.
ive tried full wipe, wipe partition and wipe dalvik cache.
ive also tried flashing custom rom via cwm and stock rom in odin which is I9100XWLS8_I9100FOPLS3_FOP
in cwm, power button isn't working..
when trying to choose a zip file, pressing power button
isn't working but touch function works well.
in odin just flashed stock rom this morning, but when it tries to boot, same problem occurs, it keeps on restarting..
i hope someone could help me ..
Click to expand...
Click to collapse
Maybe POWER button is faulty.Try to flash DorimanX Kernel.
i have manage to boot my phone,
turn on phone, while booting, i have to hard press the upper button of powermenu.
when it booted, i try to lock my phone (screen off) using powermenu and it wont work. powermenu option didnt showed up too..
but when i tried to screen off using the icon in dropdown toggle, it works fine.
yesterday after work i went to a technician, he said nothings wrong with it, and the only problem is the program.
but i already flashed it in stock rom and custom roms, i did full wiping to flash a clean rom.
this morning, i was thinking that the problem was the efs folder, but when i look into the efs folder in root system there it was.
i hope someone will help me..
When in recovery try the menu button.
Sent from my GT-I9100 using xda app-developers app
in recovery all keys are working except for the powerbutton .
And what happens when you select an action and press home?
Siyah v6 works that way.
Sent from my GT-I9100 using xda app-developers app
gastonw said:
And what happens when you select an action and press home?
Siyah v6 works that way.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
pressing home button works fine too.. the only problem is the power button key, ive tried a keytest and it dont really work.
Does it work as normal. If you push power will it turn screen of and on? You could use twrp as It dont use buttons edit: I read power button dont work at all?? Go to a better tec.
Also that efs bit is lock screen not power button. If it was gone it would still turn screen on and off and work just no lock screen:thumbup:
andrewwright said:
Does it work as normal. If you push power will it turn screen of and on? You could use twrp as It dont use buttons edit: I read power button dont work at all?? Go to a better tec.
Also that efs bit is lock screen not power button. If it was gone it would still turn screen on and off and work just no lock screen:thumbup:
Click to expand...
Click to collapse
when phone is on .. power button is totally not working .. but when it is off i had to hard press it until booting is finished .
thats what im thinking, going to a better techy might solve my problem .
Dose it turn the phone on and off? Does it work at any time on or off? I don't get what hard press is?
andrewwright said:
Dose it turn the phone on and off? Does it work at any time on or off? I don't get what hard press is?
Click to expand...
Click to collapse
i mean long press / hold pressing the power bitton until its finished from booting ..
andrewwright said:
Dose it turn the phone on and off? Does it work at any time on or off? I don't get what hard press is?
Click to expand...
Click to collapse
i mean long press / hold pressing the power button until its finished from booting ..
Got the phone with rebooting problem: it got the rebooting after updated. The device restarted during Android app optimization stage so I just unblock with the AT&T stock file (pda-odin-att-stock.tar) after that the phone can boot up fine the problem still. It works but continuing reboot every 2 minutes. I tried to clear the cache, test redbend fota... but nothing works
Anyone has idea?
abbuyacc said:
Got the phone with rebooting problem: it got the rebooting after updated. The device restarted during Android app optimization stage so I just unblock with the AT&T stock file (pda-odin-att-stock.tar) after that the phone can boot up fine the problem still. It works but continuing reboot every 2 minutes. I tried to clear the cache, test redbend fota... but nothing works
Anyone has idea?
Click to expand...
Click to collapse
your English is a little rough my friend
did you get the phone with reboot issue?
or
it started rebooting after an update?
what kind of update?
what rom are you trying to run?
and I don't understand "unblock with the ATT stock file " ?????
also what is "test redbend fota" ???
you need to be a little clearer with information please
captemo said:
your English is a little rough my friend
did you get the phone with reboot issue?
or
it started rebooting after an update?
what kind of update?
what rom are you trying to run?
and I don't understand "unblock with the ATT stock file " ?????
also what is "test redbend fota" ???
you need to be a little clearer with information please
Click to expand...
Click to collapse
First of all sorry about my English. I wish I can do better.
I got the phone with the rebooting and base on the owner of the phone he said it started rebooting after an update.
Not sure what was of update to but the phone I got always rebooting during Android app optimization stage ( when it updating about 90 files or so) but it got reboot when updating to the file of 57th (So it was not actually working)
I watched and followed the youtube (how to unblock/unbrick galaxy i717) which it used the pda-odin-att-stock.tar file with the ODIN3 V1.85 (I guess that original ROM of AT&T (android version 2.3)
After successful unblock/unbrick the phone the phone actual worked but the problem still. It works but only 2 minutes and the phone reboots.
2/ test redbend fota is one the options you can choose after hard booting the phone using both up - down keys and power key (other options are to clear the cache, or wipe the data..)
That actually happened to me while testing out Bean Stalk(which btw AWESOME ROM). It would do a Random Reboot and continuously do that every 2 minutes or so. The way I fixed it was by doing the following steps:
1) Power off your phone. If unable to power off, remove and reinsert the battery.
2 )Press and hold between both Volume keys and the Power key at the same time until the phone vibrates, then release ONLY the Power key.
3)Continue holding the Volume keys until Samsung appears on the screen. Then release both volume keys.
The recovery menu will display.
4) Press Volume down to move to option 3, Wipe data/factory reset, and then press the Home key to accept.
5) Use Volume Up and Volume Down buttons to navigate in the menu and select Yes- Delete all user data.
6)Navigate to highlight OK and press the Home key to select.
7) Select Reboot system now.
PLEASE UNDERSTAND THAT THIS WILL DELETE EVERYTHING INSIDE YOUR SD CARD AS WELL! SO DO A BACKUP BEFORE ERASING EVERYTHING!
hafridi said:
That actually happened to me while testing out Bean Stalk(which btw AWESOME ROM). It would do a Random Reboot and continuously do that every 2 minutes or so. The way I fixed it was by doing the following steps:
1) Power off your phone. If unable to power off, remove and reinsert the battery.
2 )Press and hold between both Volume keys and the Power key at the same time until the phone vibrates, then release ONLY the Power key.
3)Continue holding the Volume keys until Samsung appears on the screen. Then release both volume keys.
The recovery menu will display.
4) Press Volume down to move to option 3, Wipe data/factory reset, and then press the Home key to accept.
5) Use Volume Up and Volume Down buttons to navigate in the menu and select Yes- Delete all user data.
6)Navigate to highlight OK and press the Home key to select.
7) Select Reboot system now.
PLEASE UNDERSTAND THAT THIS WILL DELETE EVERYTHING INSIDE YOUR SD CARD AS WELL! SO DO A BACKUP BEFORE ERASING EVERYTHING!
Click to expand...
Click to collapse
I have done it already and it didn't works. I tried to clear the cache also and other options too but none of them worked.
abbuyacc said:
I have done it already and it didn't works. I tried to clear the cache also and other options too but none of them worked.
Click to expand...
Click to collapse
Could it be a battery issue? I mean if its not software, it might be hardware. Please check if the battery is fine? If you could elaborate the steps you took or the update process you followed, that would be great.
Don't worry we will definitely figure this out, i know how sad it can be when you are without your phone.
hafridi said:
Could it be a battery issue? I mean if its not software, it might be hardware. Please check if the battery is fine? If you could elaborate the steps you took or the update process you followed, that would be great.
Don't worry we will definitely figure this out, i know how sad it can be when you are without your phone.
Click to expand...
Click to collapse
No. Surely it is not about the battery. Battery is full and hold the charge pretty well. As I mentioned I was re-installed the original ROM of the phone and there was nothing much to say about this procedure. After reinstalled the original rom the phone works but the problems is still same (rebooting after 2 minutes), before the the phone didn't work and just was in the updating stage but I guess the time of the updating file was also about 2 minutes.
I believe this is about the software than the hardware issue. I am thinking that I may want to install the newest ROM to see it will work or not but I am in the middle of some works right now and have no time for it. So I am just wait to see if there is anyone had similar issue and follow their instruction. Thank you you all.
I am sure you either have hardware issue or in most circumstances it is a user issue.
Is there any possibility you have not read everything or something you are not understanding?
Those of us responding do so because our methods are tried and true. Nobody else is having this issue.
I just ask is it possible?
Have you confidently tried all suggestions with no shortcuts? Even the smallest deviation can lead to the biggest problems
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Here is a suggestion:
Please go to stock rom. After Odin restarts the phone...do not touch. Let the phone sit there for a little bit. Then if it restarts u might need to format your internal sd card after formatting system, data, cache and then install rom.
I had to flash it
hafridi said:
That actually happened to me while testing out Bean Stalk(which btw AWESOME ROM). It would do a Random Reboot and continuously do that every 2 minutes or so. The way I fixed it was by doing the following steps:
1) Power off your phone. If unable to power off, remove and reinsert the battery.
2 )Press and hold between both Volume keys and the Power key at the same time until the phone vibrates, then release ONLY the Power key.
3)Continue holding the Volume keys until Samsung appears on the screen. Then release both volume keys.
The recovery menu will display.
4) Press Volume down to move to option 3, Wipe data/factory reset, and then press the Home key to accept.
5) Use Volume Up and Volume Down buttons to navigate in the menu and select Yes- Delete all user data.
6)Navigate to highlight OK and press the Home key to select.
7) Select Reboot system now.
PLEASE UNDERSTAND THAT THIS WILL DELETE EVERYTHING INSIDE YOUR SD CARD AS WELL! SO DO A BACKUP BEFORE ERASING EVERYTHING!
Click to expand...
Click to collapse
factory reset did not help me with this...I ended up having to flash CM 10.1. Its the most stable custom I have used on this phone yet....
A collegue thought it would be interesting to see what the wipe data command on Exchange would do to my phone.
It appears to have bricked it.
The phone boots, shows the THL logo for a few seconds then shows a dark grey screen.
Is this phone recoverable.
I am a complete noob, first post, so if it is recoverable I'm going to need real step by step basic instructions.
Hope there is somebody who can help.
Thanks.
ChrisGrahamUK said:
A collegue thought it would be interesting to see what the wipe data command on Exchange would do to my phone.
It appears to have bricked it.
The phone boots, shows the THL logo for a few seconds then shows a dark grey screen.
Is this phone recoverable.
I am a complete noob, first post, so if it is recoverable I'm going to need real step by step basic instructions.
Hope there is somebody who can help.
Thanks.
Click to expand...
Click to collapse
I got this result too...only grey screen after ThL logo. Can't get into neither recovery mode nor dowlnload mode. Please help
It happened to me too, exactly the same steps and now it is the same thing: logo and after that a black screen. Please, any solution? My wife is gonna kill me (it is her phone):silly:
A hard reset could save your life..
Press and hold the volume (-) button and then press the power button for about 3 seconds, release the volume (-) button when the screen comes and wait for repair menu. It's written in Chinese. Go to the part which is writing MMC at the end with the volume (-) button and press the power button. You are now in the hard reset menu, press the power button again and wait until the phone opens. That's all. You will lose all your programs which you installed before if you didn't back up before but the phone will work. I saved my W200S yesterday with same solution.
Thanks for your advice. I noticed the Chinese menu but I avoided it every time being afraid of not ruining something . Anyway, these days I've found out how to flash new ROMs so I am fooling around with trying different ROMs, I got allowance from my wife for this ). I am trying to fix an issue of the stock ROM, the proximity sensor doesn't light up the display when taking away from ear. The phone was not rooted so any attempt to enter engineering mode failed. Yesterday I discovered a MIUI ROM which looks very stylish and it solved the proximity sensor and even added the notification LED option (this was not included in the stock ROM). Now I have to test the battery life.
motanbigcat said:
A hard reset could save your life..
Press and hold the volume (-) button and then press the power button for about 3 seconds, release the volume (-) button when the screen comes and wait for repair menu. It's written in Chinese. Go to the part which is writing MMC at the end with the volume (-) button and press the power button. You are now in the hard reset menu, press the power button again and wait until the phone opens. That's all. You will lose all your programs which you installed before if you didn't back up before but the phone will work. I saved my W200S yesterday with same solution.
Click to expand...
Click to collapse
I have the same problem with a black screen, the buttons do not work nothing happens Please help
THLW200S - Cyanogenmod 11
Hi, I solved all the issues of my THLW200S (lack of notification LED and improperly functioning of the proximity sensor) by flashing this ROM. I tried a few other ROM's but this one works flawlessly.
kasperski86 said:
I have the same problem with a black screen, the buttons do not work nothing happens Please help
Click to expand...
Click to collapse
Hi, I had the same problem with my W200S, did you solved in any way?
Can you help me?
Thanks
fagh3r said:
Hi, I had the same problem with my W200S, did you solved in any way?
Can you help me?
Thanks
Click to expand...
Click to collapse
Hi i had the same problem a grey screen no recovery mode and i fix it when flashing a new rom.
I use flash tools and i choose (format +download) tab.
I have this same problem, but i can't even get into the safe mode, the chinese one. it just boots up at the thl logo but still only dark grey screen. please help since i tried everything else
Hi guys.
I seriously need help right now.
My friend bought an s2 i9100 in cheep which was stuck on bootloop and he thought it could be repaired.
so we don't know what caused the problem.
But i was surprised that few repair shops weren't able to fix it.
let me explain the problem:-
when we hold power button or plug in a charger it show the logo, goes into recovery and reboots repeating it in loop.
so whenever i charge it goes into this loop.
we can use volume up & down key in those 2-3 seconds in recovery but not the power key.
we can access download mode and it doesn't reboots automatically but going into recovery mode manually also start this loop.
it's like we are only going in recovery mode again & again.
i installed this file "I9100XWLPW_I9100ODDLPC_I9100DDLPB_HOME.tar.md5" through odin and also used the pit file "I9100_STOCK-System_2GB-Data_512MB-Preload.pit" but nothing changed.
i don't know what to do now.
i cant find any gingerbread rom to test.
i don't know how it can be fixed,
so please help me.
Update
After doing a lot of things I finally managed to boot into system but the problem is not solved.
I flashed i9100XXLSJ which had modem and CSC files other than the PDA only.
The device actually booted in system (just the samsung logo) but it was a bootloop.
This time I kept holding power button by which the bootloop stopped and it successfuly booted but power button is not working inside the system so I can't reboot, power off or even switch on the screen.
By holding down up vol + home + power for a considerable long time I can boot into recovery. But again the power button is not working so I can't select any option.
I flashed a cwm touch recovery which is working.
So can anyone tell me what is the problem here and what can I do to actually fix it.
If you have problems with flashing stock ROM, consider flashing a custom ROM, like Cyanogenmod.
BenjyTec said:
If you have problems with flashing stock ROM, consider flashing a custom ROM, like Cyanogenmod.
Click to expand...
Click to collapse
The problem is not about flashing it's about the bootloop & tell me can I flash cyanogenmod with Odin?
@kuro2052
Try flashing the 4.1.2 JellyBean leak ROM via ODIN linked in this thread (scroll down to you see "Another option for i9100"):
[GUIDE][Troubleshoot a failed Odin flash]
This will factory reset the device which may hopefully resolve your problems.
gsstudios
gsstudios said:
@kuro2052
Try flashing the 4.1.2 JellyBean leak ROM via ODIN linked in this thread (scroll down to you see "Another option for i9100"):
[GUIDE][Troubleshoot a failed Odin flash]
This will factory reset the device which may hopefully resolve your problems.
gsstudios
Click to expand...
Click to collapse
Actually the ROM you are talking about is the ROM which I flashed which is mentioned in my second post " update".
PDA = CODE_I9100XXLSJ.tar
PHONE = MODEM_I9100XXLS6.tar
CSC = CSC_HOME_OXX_I9100OXXLS1.tar.
That's how I got this far, previously it was impossible to boot into system.
kuro2052 said:
After doing a lot of things I finally managed to boot into system but the problem is not solved.
I flashed i9100XXLSJ which had modem and CSC files other than the PDA only.
The device actually booted in system (just the samsung logo) but it was a bootloop.
This time I kept holding power button by which the bootloop stopped and it successfuly booted but power button is not working inside the system so I can't reboot, power off or even switch on the screen.
By holding down up vol + home + power for a considerable long time I can boot into recovery. But again the power button is not working so I can't select any option.
I flashed a cwm touch recovery which is working.
So can anyone tell me what is the problem here and what can I do to actually fix it.
Click to expand...
Click to collapse
In CWM touch recovery, you can swipe (or touch) to confirm the option.
Try factory reset. Reboot.
If that doesn't help, try wiping system, cache and data.
Let me know how that goes
gsstudios
gsstudios said:
In CWM touch recovery, you can swipe (or touch) to confirm the option.
Try factory reset. Reboot.
If that doesn't help, try wiping system, cache and data.
Let me know how that goes
gsstudios
Click to expand...
Click to collapse
Wiping data/factory reset and cache doesn't solve the problem.
There is format option in 'mounts and storage' so I formated system, data, cache & also emmc. But the bootloop is not gone. The only thing that is gone is the ROM because of those formats. I have yet to to install the ROM again.
maybe is a faulty power button... Do u have to push it down a little harder than normal?
affigne said:
maybe is a faulty power button... Do u have to push it down a little harder than normal?
Click to expand...
Click to collapse
It might be the problem of power button. Sometimes it boots as soon as I put the battery. It always boot when I plug in charger. Sometimes it boots after I press and hold the power key for maybe 15 second & sometimes it doesn't boot when holding power key & I have leave hold again to boot it. And important thing is when it boots, I have to hold the power key until the key lights up to stop it from bootloop but then the power is Jo longer functional in system. Same goes for recovery. But this is the only till nowROM which actually boots into system. Other ROMs were booting into recovery automatically.
I wanted to test cyanogenmod but I am not able to install twrp. I followed the steps here using HeimdallSuite https://twrp.me/devices/samsunggalaxys2i9100.html
I had no problem in the steps but the recovery is not actually replaced when I boot into it.
The recovery that I have currently is not able to flash isorec_twrp or any cyanogenmod directly. It always shows error code 7.
I am going to replace the power button with my friend's s2 (other friend who have an s2 laying around) only to see it works.
Anyways tell me how to install twrp successfuly.
The actual power button needs to soldered, I thought It would be a connector, so I am not going to do that. But as far as I can tell, the plastic button isn't the problem.
kuro2052 said:
It might be the problem of power button. Sometimes it boots as soon as I put the battery. It always boot when I plug in charger. Sometimes it boots after I press and hold the power key for maybe 15 second & sometimes it doesn't boot when holding power key & I have leave hold again to boot it. And important thing is when it boots, I have to hold the power key until the key lights up to stop it from bootloop but then the power is Jo longer functional in system. Same goes for recovery. But this is the only till nowROM which actually boots into system. Other ROMs were booting into recovery automatically.
I wanted to test cyanogenmod but I am not able to install twrp. I followed the steps here using HeimdallSuite https://twrp.me/devices/samsunggalaxys2i9100.html
I had no problem in the steps but the recovery is not actually replaced when I boot into it.
The recovery that I have currently is not able to flash isorec_twrp or any cyanogenmod directly. It always shows error code 7.
I am going to replace the power button with my friend's s2 (other friend who have an s2 laying around) only to see it works.
Anyways tell me how to install twrp successfuly.
Click to expand...
Click to collapse
Since I was on leaked JB firmware, what I did was to install philz recovery via android stock recovery, then install latest dorimanx isorec recovery/kernel, then install TWRP...
---------- Post added at 01:10 AM ---------- Previous post was at 01:09 AM ----------
kuro2052 said:
The actual power button needs to soldered, I thought It would be a connector, so I am not going to do that. But as far as I can tell, the plastic button isn't the problem.
Click to expand...
Click to collapse
check the battery contacts...