Related
This walk through assumes you are starting with a stock unaltered Pheonix/Thrive (Froyo 2.2.1) or you have upgraded to Gingerbread 2.3.4 using LG's utility. I have tested both of these methods on my Phoenix but I have not tested it on the Thrive, so mileage may vary, use at your own discretion. If you brick your phone (unlikely) its your fault not mine.
Gingerbreak for Froyo (2.2.x)
1. First you will need to be able to load non-market APKs you have two options to do this.
A) Update your phone to the latest version Froyo 2.2.2 (some people have had some issues check the thread on that).
B) Go to your dialer, type 3845#*505#[Phoenix] or "3845#*506#"[Thrive] then scroll down to "Unknown Sources Test" and check the box
2. Download the APK from the following link:
http://forum.xda-developers.com/atta...1&d=1303829207
(I emailed the link to myself to make it so I didnt have to browse to it)
Note* it i will yell about not knowing what to do with that kind of download but just ignore it and download it anyways
3. Use a file explore (I used ES file Explore) to search for the newly downloaded APK I'm sure someone out there knows exactly where it downloads to but I couldn't find it easily though I can tell you its on the SDcard.
4. Run the APK
5. Turn on USB Debug mode (Settings>Application>Development)
6. Go to your Apps and run Gingerbreak
7. Click the root button
8. Let the phone do its thing (it will reboot)
9. Reboot the phone manually to make sure the root took and you didn't end up with a temp root
If all went well you have a fully rooted phone.
Here is the link to the original XDA site I recommend reading it over (at least the first post) so you understand what is going on.
[26.04.2011][v1.2] GingerBreak APK (root for GingerBread) - xda-developers
If anyone notices an issue with any of the steps here please let me know and I will update them.
Also thanks go to kingv10 for pointing out the secrete code for us.
Superone click for Gingerbread 2.3.4
This method will probably work both gingerbread and froyo but I have not tested it on Froyo. The orginal post I copied from can be found at:
http://www.blogotechblog.com/2012/02...3-gingerbread/
I recommend you read the page but for those of you who won't here is the rundown on how to root.
1. Connect your phone to the PC with USB Debugging enabled. You can enable it by going to Settings>Applications>Development and ensure that USB Debugging is checked. You will need to have installed the USB drivers for your phone. You should already have these if you upgraded to 2.3.4.
2. Download the rooting zip package and extract the contents to a folder in your PC. Let the folder be named as “root”
http://tinyurl.com/6v5fhu2
3. In the extracted folder, go to ADB folder and start cmd7.exe (for Windows 7 users) or cmdxp.exe (for Windows XP users). You need to run as Administrator.
4. In Command Prompt, type the following commands:
adb devices
adb shell
Now the symbol should change to “$” or “#”.
Enter the following command
echo 1 > /data/local/lge_adb.conf
5. Reboot your phone.
6. Go to the "root" folder again and run Superoneclick.exe
7. In Superone click, find the methods drop down box (right side), select Gingerbreak and then click the Root button.
8. Reboot again
Now you should be rooted
Hi there - could you repost that download link? It's not functioning.
Rant
Glad to see you're giving credit to the source.
LOL no credits to you mr.raenye =)
Thank you
worked perfectly.
raenye said:
Glad to see you're giving credit to the source.
Click to expand...
Click to collapse
Just for the record here I would have given you credit for your post if had I even read it before now. This write-up came about mainly from posts on androidcentral.com and general searching from google about rooting. Had I known that your post was out there I would have used it and sighted to it but at the time I initially posted this how-to I did not have any idea regarding the secret code and had to wait for my phone to get the update to 2.2.2 so that I could run programs from unknown sources. You may have shared similar information at a similar time but I didn't not get my information from your post, I wish I had it would have made life easier.
recently bought a Huawei ascend y200 and i want to root it!
Any advice gratefully received
in Germany done since may
http://www.android-hilfe.de/root-custom-roms-modding-fuer-huawei-ascend-y200/250421-how-root-werkseinstellung-systemupdate.html
root huawei ascend Y200
thank you very much! anyway is there any english version.
BR
Root Ascend Y200
Then you need to learn German in order to root this device.
your friend.
Come to me Sochhean, i will do it for you for free.
Sent from my Galaxy Nexus
In the German Board is now an english HowTo. I cant link to them, because i’m a new user @xda
Root Huawei Y200 Succesfully (ENGLISH)
sochhean said:
recently bought a Huawei ascend y200 and i want to root it!
Any advice gratefully received
Click to expand...
Click to collapse
Hi, I've successfully rooted my phone. I have a Huawei Y200.it might be easier if you waited for OneClickRoot do be launched maybe they have the device listed for auto flashing that does everything for you.
OneClickRoot: ==> I can't post links sorry ..New User, please search on internet..
But anyway, here's the batch file I think I uploaded it..
So its easy once you root it, but WARNING: DO NOT INSTALL CLOCKWORK MODE AGAIN THROUGH ROM Manager OR ANY SOURCE. (this might bring you into bootloop)
follow steps to use the batch file...
1- You need to do this on your phone: Allow USB Debugging and STAY AWAKE Function, STOP fastboot mode. Now Install ADB Drivers when connecting phone into computer via usb and debugging mode is on (you'll see a drive usually green on your computer, check for "drivers" inside driver folders and install windows drivers.
2- You need to install Android SDK : ==> New User, Can't post links, Search Android SDK..
navigate to default download location: " C:\Program Files\Android\android-sdk\platform-tools ", shift + right click inside the folder with nothing selected, and run command prompt from there. run following command "adb devices" and it should list a device number.
3- Now exctract the zip file in attachement and run these in order: -"adb.exe" then -"fastboot.exe" then -"root_v5.2.bat". It should say a succesfull message and ( as i remember) phone should reboot (if it states "reboot phone now" in cmd prompt). now you shoudl be rooted and see "SuperUser" application installed.
4- Check if you're properly rooted with a "rootchecker" market app. If App requested root access by SuperUser (ofcourse you'll tap Accept right?) and says you have proper root, you can now jump around and scream " I rooted my phone" like i did... You can now Install Link2sd app and enjoy free enternal storage since you've rooted your phone... Any Directions using Link2sd repost or you can search internet... One limitation is you can'r use swap (to increase your RAM ), and have to go through different ROM's. If rooted your phone succesfully please inform and on any questions about ROM switching...
Hi there.
The root process isn't so hard , bit the rom switch what would be important for me (not the method, i know that and i'we installed modified recovery its working...)
Went to hell and back @google to find any custom roms for this little fckr but besides the clean base rom and the ics por (whats not working for me) i could not find any other rom. Sorry my bad i have found one origonal stock rom too, bit besides theese do you know is there any other roms exists for u8655?
anyone try the above method?
is there anyone try the above method for English version?
An earlier version, on hungarian with english and german language included... worked perfect. Since 6 months.
MoH21 said:
Hi, I've successfully rooted my phone.
Click to expand...
Click to collapse
Hey, i know the file, that attached...
I'm happy that you understand my realy bad translation of this howto
tapped via my huawei mobilephone
1- You need to do this on your phone: Allow USB Debugging and STAY AWAKE Function, STOP fastboot mode. Now Install ADB Drivers when connecting phone into computer via usb and debugging mode is on (you'll see a drive usually green on your computer, check for "drivers" inside driver folders and install windows drivers.
2- You need to install Android SDK : ==> New User, Can't post links, Search Android SDK..
navigate to default download location: " C:\Program Files\Android\android-sdk\platform-tools ", shift + right click inside the folder with nothing selected, and run command prompt from there. run following command "adb devices" and it should list a device number.
3- Now exctract the zip file in attachement and run these in order: -"adb.exe" then -"fastboot.exe" then -"root_v5.2.bat". It should say a succesfull message and ( as i remember) phone should reboot (if it states "reboot phone now" in cmd prompt). now you shoudl be rooted and see "SuperUser" application installed.
4- Check if you're properly rooted with a "rootchecker" market app. If App requested root access by SuperUser (ofcourse you'll tap Accept right?) and says you have proper root, you can now jump around and scream " I rooted my phone" like i did... You can now Install Link2sd app and enjoy free enternal storage since you've rooted your phone... Any Directions using Link2sd repost or you can search internet... One limitation is you can'r use swap (to increase your RAM ), and have to go through different ROM's. If rooted your phone succesfully please inform and on any questions about ROM switching...
Click to expand...
Click to collapse
This procedure is for CWM, not for root.The root phone you must copy superuser.signed 3.0.7 on memory card, and boot phone in cwm, and install zip from sd card/choose zip from sd card/superuser.signed3.0.7/yes, and reboot system now, when is proces for install zip over.Then your phone is rooted, you think because write ROOT_V5.0.2 it is for root-NO, this for install CWM.
MoH21 said:
Hi, I've successfully rooted my phone. I have a Huawei Y200.it might be easier if you waited for OneClickRoot do be launched maybe they have the device listed for auto flashing that does everything for you.
OneClickRoot: ==> I can't post links sorry ..New User, please search on internet..
But anyway, here's the batch file I think I uploaded it..
So its easy once you root it, but WARNING: DO NOT INSTALL CLOCKWORK MODE AGAIN THROUGH ROM Manager OR ANY SOURCE. (this might bring you into bootloop)
follow steps to use the batch file...
1- You need to do this on your phone: Allow USB Debugging and STAY AWAKE Function, STOP fastboot mode. Now Install ADB Drivers when connecting phone into computer via usb and debugging mode is on (you'll see a drive usually green on your computer, check for "drivers" inside driver folders and install windows drivers.
2- You need to install Android SDK : ==> New User, Can't post links, Search Android SDK..
navigate to default download location: " C:\Program Files\Android\android-sdk\platform-tools ", shift + right click inside the folder with nothing selected, and run command prompt from there. run following command "adb devices" and it should list a device number.
3- Now exctract the zip file in attachement and run these in order: -"adb.exe" then -"fastboot.exe" then -"root_v5.2.bat". It should say a succesfull message and ( as i remember) phone should reboot (if it states "reboot phone now" in cmd prompt). now you shoudl be rooted and see "SuperUser" application installed.
4- Check if you're properly rooted with a "rootchecker" market app. If App requested root access by SuperUser (ofcourse you'll tap Accept right?) and says you have proper root, you can now jump around and scream " I rooted my phone" like i did... You can now Install Link2sd app and enjoy free enternal storage since you've rooted your phone... Any Directions using Link2sd repost or you can search internet... One limitation is you can'r use swap (to increase your RAM ), and have to go through different ROM's. If rooted your phone succesfully please inform and on any questions about ROM switching...
Click to expand...
Click to collapse
when you say RUN adb.exe fastboot.exe and root.bat what do you mean and where do i run them? ive installed platform tools and have done adb devices//my device is there. i extract the files and run them in cmd and double clicking and it doesnt reboot. i guess im having trouble with the .zip i know the files are good. any help :good:would be appreciated.
sketchscarz said:
when you say RUN adb.exe fastboot.exe and root.bat what do you mean and where do i run them? ive installed platform tools and have done adb devices//my device is there. i extract the files and run them in cmd and double clicking and it doesnt reboot. i guess im having trouble with the .zip i know the files are good. any help :good:would be appreciated.
Click to expand...
Click to collapse
sup
Sent from my H866C using xda app-developers app
Yo brow I'm trying to root the h866c. These directions may work but I think that the huawei mercury root directions will make this a functioning root check it out
Sent from my SPH-D600 using Tapatalk 2
AW: [Q] help for root huawei ascend Y200
German: http://www.droidwiki.de/Huawei_Y200/Root
...using tapatalk on my huawei honor smartphone
Since Firmware B898, the bootloader is locked. no way for using clockworkmod... No downgrade possible.
...using tapatalk on my huawei honor smartphone
det-happy said:
Since Firmware B898, the bootloader is locked. no way for using clockworkmod... No downgrade possible.
...using tapatalk on my huawei honor smartphone
Click to expand...
Click to collapse
Hi there
I did a research about this lock and i found a modified kernel what is capable of unlocking again the bootloader. (Claimed by the author, that it should solwe rhe issue)
Please tell me, since i did not upgraded the firmware due to the issue, could it be true?
Because i did not found any feedback from the users who tried it.
Can we count on another unlockibg method, or is this true that the bl can be unlocked via adb kerbel flash?
Thanks in advance.
I found an information on the german android-board
--> http://www.android-hilfe.de/huawei-ascend-y200-forum/414947-b898.html#post5670959
Fuchsteufel told us, that the recovery is working, but only with adb-commands, without any screen.
The solution is to flash an new version of the kernel and the cwm
fuchsteufel said:
für B898 Modified CMW
B898 kompatible Bootimages
Click to expand...
Click to collapse
Thank you.
Hi.
Im really confused at the moment. I recently got a Android 2.3.6 phone, models the HUAWEI Ascend Y201. So far happy with it but there are a few things I want to do- and reading up on it has more Tbab confused me. Firstly I want to remove the bloatware it came with but it seems this can't be done without ‘root‘. I understand that this basically allows me more permissions with the system? Secondly I am wondering about these ROMs. What do they do? Lastly, the play store seems to like telling me there is no space left for the application, but it installing to a 4gb SD card? An application I saw called MarketFix claims to fix it but needs root.
I have tried z4root (this did nothing) and gingerbreak (ran for 7 hours).
Anyone?
bump
super1click
try super1click
but need a pc .
if it didn't work I will show another way.
Answer?
I am not responsible for any damage you may do to your phone by following this guide.
The files you will need, download them and extract them to a folder on your desktop:
View attachment 1790730
UnlockBootloader.zip
View attachment recovery.zip
- Now, get your phone and go to Settings > Developer Tools. Make sure USB debugging is enabled.
- Also disable Fastboot in Settings.
- Connect your phone to your computer via USB and let it install the drivers. Make sure they are installed correctly. Do not select "Turn on USB storage" on your phone.
Here Comes How To Root + Unlock Bootloader:
1. Go to the folder on your desktop where you extracted the files.
2. Right click on unlockbootloader.exe and select 'Run as administrator'.
3. Click "ROOT Your Phone", the program will work and then close on it's own.
4. In your phone, go to the apps drawer and there should be a new app called Superuser.
5. Now go to your PC, open the same program, but this time click "Unlock BOOTLOADER".
6. Let it finish, the program will close on it's own, and then power off your phone.
7. Unplug the phone from the PC and we are done.
Congrats you have unlocked your bootloader and have root :angel:
<- hit the thanks button if i helped!
Don't work for me :'(
I don't have superuser installed
Hi everyone!
I'm gonna be short, rooting requires the following itens:
* Android supported version (Read title)
* Pacience
* Kingroot app
* No fear to void warranty/get bricked
Okay let's go!
Follow the following steps and please DON'T SK1P ANY STEP (YES I WROTE SK1P), I WON'T BE RESPONSIBLE FOR ANY DEVICE BRICK, OR ANY BROKEN WINDOWS AFTER THE PROCESS.
1- Charge battery until 60% at least. (Just for precaution)
2- Download Kingroot apk from the web. (Sorry, not posting links since it's very popular, you'll find it when you search for it)
3- Install Kingroot apk. (Tick the option "Allow Unknown Sources" under the "Security" tab on the Settings app).
(VARIES WITH DEVICE) -> 4- Turn off write protection through recovery mode. (Some devices won't let you root until you set write protection off, not doing this, results in a soft brick, not all devices have this option, if your's hasn't, skip this step).
5- Enable Progammer mode. (Tap 8 times on compilation number under "About device" on the Settings app).
6- Enable Debug Mode. (You can find this under "Programmer options").
7- Open Kingroot. (Turn on wi-fi)
8- Press " Try to root" if your device is compatible, don't forget to leave wi-fi on!
9- Wait until 100%.
10- Congrats! Rooted! Now you can find new apps such as Purify and Kinguser on your app drawer, I recommend you not to use Superuser from ChainsDD if you don't have a custom recovery, that will lead you to deadly brick, believe me, it already happened to me once, learned the lesson
Hope you succeeded and happy rooting!
It's not the right forum to post this, move it to android general
The method is derived from This post and does not require root access hence doesn't void Warranty or trips Knox:-
This is a Noob-friendly and Safe Method. The wireless debugging section might be new to people though.
This method is demonstrated in this youtube video as well and all the download links are given in the video description
Primary tools and methods used are:-
ADB Tools
FrpUnclock
SamsungDriver
Disabled Driver signature
Wireless debugging
Step:-1 [Preparing the device and using FRP remover]
First of all, reset the device (hard reset before removing any existing account )
Wipe Data and cache partition and reboot to system.
Select language and go to next
Accept conditions and proceed to wifi selection.
Login to your wifi and press back instead of going forward
Now you should get the language selection screen.
Connect your device to PC and launch FRP Tool.
For this tool to work properly in Windows 10, you must disable Driver Signature Enforcement.
Now in SamsunFRP tap on disable Driver Signature,
[Before proceeding ensure that the wifi connection on the phone is working]
Click on BypassFRP (It may ask to install the driver but you should install the driver given in below)
vlcsnap-2021-12-27-23h49m37s183.png
Once the application does its job you will see a pop-up on the tablet named Easy Firmware.
vlcsnap-2021-12-27-23h50m42s631.png
Step:-2 [Downloading QuickShortcut to ignore Knox]
Click on View and it will launch youtube then Chrome.
In chrome don't signup yet and in the search tab search for "vnrom"
select first link stating BYPASS GOOGLE ACCOUNT 2021 - vNORM.net
On the opened page scroll and download "QuickShortCutMaker.apk"
Allow installation from chrome and launch the application.
[Disconnect from your WIFI]
In the application search box search for "Setup"
Expand the Android Setup and select the last section (Just above the other "Android Setup" with Clock Logo)
vlcsnap-2021-12-27-23h52m16s102.png
Select Try
vlcsnap-2021-12-27-23h53m14s399.png
It will show Preparing for Setup... (let it take its time)
It will soon display the screen. Now lock the device and use the notification drawer to access settings
Knox might try to peep in but keep using the notification drawer to access settings.
Under the settings use developer mode (re-enable if not visible)
Step 3:- Using Wireless Debugging to disable knox permanently
Ensure pc and device on same network and disable any internet connection.
Ensure there is only LAN but no internet access as here Knox will attempt to regain control.
GO to Developer Options and select Wireless Debugging.
Now in your PC navigate to ADB/Platform Tools and launch CMD or Powershell by pressing Shift and right-click Open PowerShell here.
If using CMD type command as adb pair.
else in PowerShell type command as ".\adb pair".
Check this tutorial to connect the device to adb wirelssly.
Once you are connected to the device
enter
.\adb shell
pm disable-user --user 0 com.sec.enterprise.knox.cloudmdm.smdms
exit
vlcsnap-2021-12-27-23h55m09s659.png
Now enjoy your Bloatfree tablet.
You can change wallpaper add your own account and do everything as there will be no restrictions or Privacy invasion.
Note:- Updating or Resetting the device will roll back all the changes and you will have to repeat the procedure again
Thank you
Great. Love that people are now helping and sharing these tricks.
Great to see , will gain more popularity now .
have u tried root checker app does it shows no root ? if app shows grant permission dialog box then its rooted
AddictedA1 said:
have u tried root checker app does it shows no root ? if app shows grant permission dialog box then its rooted
Click to expand...
Click to collapse
Here check the edited post. I have attached screenshot for root checker and Samsung info as well
starkprime74 said:
The method is derived from This post and does not require root access hence doesn't void Warranty or trips Knox:-
This is a Noob-friendly and Safe Method. The wireless debugging section might be new to people though.
This method is demonstrated in this youtube video as well
Primary tools and methods used are:-
ADB Tools
FrpUnclock
SamsungDriver
Disabled Driver signature
Wireless debugging
Step:-1 [Preparing the device and using FRP remover]
First of all, reset the device (hard reset before removing any existing account )
Wipe Data and cache partition and reboot to system.
Select language and go to next
Accept conditions and proceed to wifi selection.
Login to your wifi and press back instead of going forward
Now you should get the language selection screen.
Connect your device to PC and launch FRP Tool.
For this tool to work properly in Windows 10, you must disable Driver Signature Enforcement.
Now in SamsunFRP tap on disable Driver Signature,
[Before proceeding ensure that the wifi connection on the phone is working]
Click on BypassFRP (It may ask to install the driver but you should install the driver given in below)
View attachment 5493067
Once the application does its job you will see a pop-up on the tablet named Easy Firmware.
View attachment 5493069
Step:-2 [Downloading QuickShortcut to ignore Knox]
Click on View and it will launch youtube then Chrome.
In chrome don't signup yet and in the search tab search for "vnrom"
select first link stating BYPASS GOOGLE ACCOUNT 2021 - vNORM.net
On the opened page scroll and download "QuickShortCutMaker.apk"
Allow installation from chrome and launch the application.
[Disconnect from your WIFI]
In the application search box search for "Setup"
Expand the Android Setup and select the last section (Just above the other "Android Setup" with Clock Logo)
View attachment 5493071
Select Try
View attachment 5493073
It will show Preparing for Setup... (let it take its time)
It will soon display the screen. Now lock the device and use the notification drawer to access settings
Knox might try to peep in but keep using the notification drawer to access settings.
Under the settings use developer mode (re-enable if not visible)
Step 3:- Using Wireless Debugging to disable knox permanently
Ensure pc and device on same network and disable any internet connection.
Ensure there is only LAN but no internet access as here Knox will attempt to regain control.
GO to Developer Options and select Wireless Debugging.
Now in your PC navigate to ADB/Platform Tools and launch CMD or Powershell by pressing Shift and right-click Open PowerShell here.
If using CMD type command as adb pair.
else in PowerShell type command as ".\adb pair".
Check this tutorial to connect the device to adb wirelssly.
Once you are connected to the device
enter
.\adb shell
pm disable-user --user 0 com.sec.enterprise.knox.cloudmdm.smdms
exit
View attachment 5493079
Now enjoy your Bloatfree tablet.
You can change wallpaper add your own account and do everything as there will be no restrictions or Privacy invasion.
Note:- Updating or Resetting the device will roll back all the changes and you will have to repeat the procedure again
Thank you
Edit 1:-
Here's the attached screenshot of the root checker and Samsung info app.
They both state no root and Knox hasn't been tripped as well
View attachment 5493339View attachment 5493341
Click to expand...
Click to collapse
Dude if anyone haven't connected the tab to the internet from the time of purchase, then more simple way is there. Don't connect the tab to the wifi instead skip in the startup setup, get to the homescreen of tab, then open settings & activate developer's option. from their activate usb debugging and use the same command as mentioned in adb cmd. and then you are free to connect with internet and use tab without knox getting into action. but you have to deactivate auto update from developers and system upate menu in settings. Soon i will put a youtube video for that!!! Njoy
KillerSX said:
Dude if anyone haven't connected the tab to the internet from the time of purchase, then more simple way is there. Don't connect the tab to the wifi instead skip in the startup setup, get to the homescreen of tab, then open settings & activate developer's option. from their activate usb debugging and use the same command as mentioned in adb cmd. and then you are free to connect with internet and use tab without knox getting into action. but you have to deactivate auto update from developers and system upate menu in settings. Soon i will put a youtube video for that!!! Njoy
Click to expand...
Click to collapse
Yup this should work as well. But for full compatibility, i have shown the entire step right from the first screen
starkprime74 said:
Yup this should work as well. But for full compatibility, i have shown the entire step right from the first screen
Click to expand...
Click to collapse
yes its very helpful & i thank u for that. with that guide of you and @AddictedA1 , i was able to break my first tab, now i'm just xploring other ways! this method is same as yours, but since device was opened for the first time and it havent enrolled not once with knox, we can enter home tab screen easily, so we can bypass the initial steps and go to the cmd step directly. it's the same output in end!
KillerSX said:
Dude if anyone haven't connected the tab to the internet from the time of purchase, then more simple way is there. Don't connect the tab to the wifi instead skip in the startup setup, get to the homescreen of tab, then open settings & activate developer's option. from their activate usb debugging and use the same command as mentioned in adb cmd. and then you are free to connect with internet and use tab without knox getting into action. but you have to deactivate auto update from developers and system upate menu in settings. Soon i will put a youtube video for that!!! Njoy
Click to expand...
Click to collapse
yeah my frnd did that but u have to be fast,knox fires up quick blocks every access as it is the device admin
AddictedA1 said:
yeah my frnd did that but u have to be fast,knox fires up quick blocks every access as it is the device admin
Click to expand...
Click to collapse
bro you dont have to connect to iinternet initially from the start when you just unbox the tablet for first time and open it. it works only for those tabs. soon i will attach a video guide for that.
KillerSX said:
bro you dont have to connect to iinternet initially from the start when you just unbox the tablet for first time and open it. it works only for those tabs. soon i will attach a video guide for that.
Click to expand...
Click to collapse
yeh i know somebody tried that , its different from stock rom
Is it is possible to format the device which has knox?
lol997 said:
Is it is possible to format the device which has knox?
Click to expand...
Click to collapse
what u mean format , goto recovery mode do wipe factory reset .cleans all data but not pre installed apps nor knox
lol997 said:
Is it is possible to format the device which has knox?
Click to expand...
Click to collapse
Yes but formatting/resetting won't remove knox
why down ?
AddictedA1 said:
why down ?
Click to expand...
Click to collapse
had to due to some concern. Will restore soon
Claims that disconnecting internet at 50 percent in setup will result in able to change wallpaper?
Can someone confirm this or should I do all the way without disrupting internet. As harder setting the device is also sending information regarding number of resets.
Abish4i said:
Claims that disconnecting internet at 50 percent in setup will result in able to change wallpaper?
Can someone confirm this or should I do all the way without disrupting internet. As harder setting the device is also sending information regarding number of resets.
Click to expand...
Click to collapse
Can't confirm it since didn't have a chance to try that
But do you just want to remove the wallpaper and let the monitoring and stuff be as is?
Yes, I'm not sure I'll be restriction privacy access as we have a ID tag already to the device.
Though when ppl think they can somehow restrict privacy without using FBE on FDE rom that's highly unlikely.
Installation from Chrome does not work for me. Has this been patched? Because other FRP Removals had similar methods where you download a app in Chrome but none of them work cause of this.