Phone Xperia Mini ST15i (STOCK 4.0.4 ROM) HAS SUCCESSFULLY INSTALLED BY CMW X-Part. BUT WHEN START, SONY LOGO APPEARS WE DO NOT press the VOLUME DOWN TO BOOT CMW, I tried so many ways, BUT NOT BE? I WANT TO SEEK HELP GUIDE YOU, THANK YOU
Your English.. :dafuq:
not able to understand :silly:
whether u want help OR u want to help
Anyway if u want to install CWM ..Flash Custom Kernel (only for unlock bootloader)
if u r bootloader is locked use this :- http://www.4shared.com/rar/DvUkA1hA/CWM-Install.html?
press thanks if i helped :good::good:
Related
can somebody explain to me if its posible to install recovery on a xperia mini pro sk17i, and if its posible how do i install it?
thanks in advance
i do not have mini pro but i think taht is the same as with ray you need too root the phone:
http://forum.xda-developers.com/showthread.php?t=1216783
and after this install doomkernel:
http://forum.xda-developers.com/showthread.php?t=1234459
but read the threads carefully and see if my assumptions is right ;-)
Is the bootloader on your mini pro unlocked or not? You cannot root it unless it is.
thanks dudes!!!
allready unlocked bootloader and rooted phone with [FIRMWARE][4.0.A.2.368][Mini Pro][SK17i][MANGO] Official Firmware + ROOT solution
i would like to install recovery with out installing doomlord kernel is it posible???
if not does doomlords kernel have anybugs???
Doomlords kernel is fine.
thanks once again.....
do you know if its safe to use uot kitchen for mini pro???
I'm not sure its the first time i have seen that.
dude just used uot kitchen and installed it on my phone, allready half a day using it no problems yet, (only changed battery icon and fonts)
ps: how long should it take to turn the screen on once you press the home or power key from idle when the screen is off???
This post is old, but just to inform some curious noob guy (like me ), there a way to instal cwm recovery to any xperia, search on Play: Xperia CWM Auto-Installer
cya folks
first you must root you device
then install recovery
after that you have recovery.
hi!
iam using sony ericsson W8 phone and want to upgrade it to ics or anything higher than 2.1(eclair). Please help on how to root my phone and install custom ROM. Iam new to this process.
Ismilesimai said:
hi!
iam using sony ericsson W8 phone and want to upgrade it to ics or anything higher than 2.1(eclair). Please help on how to root my phone and install custom ROM. Iam new to this process.
Click to expand...
Click to collapse
There is no official update other than 2.1 eclair.
check the below link to root your W8.
http://androidforums.com/x8-all-things-root/296251-new-superoneclick-root-install-use-xrecovery-xperia-x8.html
check this thread for flashing cyanogenmod
http://forum.xda-developers.com/showthread.php?t=973753
check this thread too http://talk.sonymobile.com/thread/22492?start=0&tstart=0
Press thanks button if i've helped you:good:
best way to get ics on your device is go to xperia x8 section choose the rom and download nAa ics 04 kernel after that you will get taste of real ics. the w8 and x8 are the same so you will be able to install it.
sorry for my bad english
hit thanks if i help you
Help
Hello..
i have tried all the matters above what you said
but my phone does not allow me to paste that 3 files to system->bin->mound
it says. ' Google - root with your phone model number
am confusing now
kindly help me to update OS in my phone or Root my phone
Thanks
Finally i learned to root and sucessfully rooted my XPERIA U,thanx to xda developers staff...
now i want learn to install CUSTOM ROMS onto my phn please help me iam new to this please answer some of my questions below i would be very thankfull for ur answers..
1) what are ROMS..?
2)Where do i get them plz give me the site for downloading them for my xperia U...?
3) How can i install them plz give me easy and safe procedure to install CWM...?
4) Do INSTALLING and FLASHING roms are the same..?
5)what happens if i install the roms of other phones onto my phones..?
6)How to get into recovery mode for my xperia U..?
7) what are KERNELS and how do they differ from ROMS and how to install and where do i get them...?
Any help would be appreciated...
Thanx..
Hello, friends. I'm writting to ask you for a help, because i have a very big problem.
Some time ago I installed wrong ROM for my Xperia Mini, which was made for Xperia Pro.... I found some good ideas and offers in this forum, like install lastest firmware .62 with FlashTool and then rom, for example, hybrom_v10 via Recovery Mode (CWM). The main problem is I cannot install ROM, because my phone is totally wiped now (there is no CWM). Secondly, I cannot install CWM because i can't enable USB Debugging because of the TouchScreen, which is NOT WORKING. I've been serching for some information a lot about this, but nothing helped..... If you know the solution, PLEASE help me some how, i don't know what to do and I really need to fix this phone. Thank you for your attention.
Lansingas said:
Hello, friends. I'm writting to ask you for a help, because i have a very big problem.
Some time ago I installed wrong ROM for my Xperia Mini, which was made for Xperia Pro.... I found some good ideas and offers in this forum, like install lastest firmware .62 with FlashTool and then rom, for example, hybrom_v10 via Recovery Mode (CWM). The main problem is I cannot install ROM, because my phone is totally wiped now (there is no CWM). Secondly, I cannot install CWM because i can't enable USB Debugging because of the TouchScreen, which is NOT WORKING. I've been serching for some information a lot about this, but nothing helped..... If you know the solution, PLEASE help me some how, i don't know what to do and I really need to fix this phone. Thank you for your attention.
Click to expand...
Click to collapse
You don't need USB debugging to install CWM! Just flash any kernel that has cwm in it. Almost all the custom kernels have cwm. If you haven't unlocked your bootloader, then I suggest that you do it so that you can flash a kernel which has cwm.
Maybe you should unlock your bootloader, because after that you can flash a custom kernel that has cwm built in
Sorry, did not see abcdjdj's post, was writing mine while he posted his one
Lansingas said:
Secondly, I cannot install CWM because i can't enable USB Debugging because of the TouchScreen, which is NOT WORKING. I've been serching for some information a lot about this, but nothing helped
Click to expand...
Click to collapse
There are numerous threads on the touchscreen issue, they're as annoying and as common in this section as best ROM threads are in the Arc section, so I'm not sure why People can't find the solution.
Thank you very much ! Now on the last step left. I installed .62 firmware, hybrom. TouchScreen still not working, but I will figure out how to fix it from orhers threads, well, i hope.
Hello,
I have a xperia u and i was following a tutorial on how to install a custom rom. The problem is when i got to the cwm menu bit and i try to install rom from zip file it keepsy saying ''installing update...installation aborted''.
I absolutely need someone to help me asap please because i am so scared that my phone is messed up right now :S
Is there any way i can restore things to how they were before???
Please help people at xda forums
flash the stock firmware of ur device
always do a backup before flashing new roms