This is only my second time posting a review like this (first was last year for the Note 2), and would just like to take some time putting together a review that I hope will help some people make a decision if they are undecided between some of the available cases.
After scouring the internet back in December I narrowed my choices down to four potential cases. I wanted to give each a fair shake, so purchased all four and have been trying each one out since then - used each case for a full 7 to 10 days at a time over a 5+ week period.
Disclosure:
I will say that I am an individual who values a case that offers more than just minimal protection. Spending $800+ CDN for a phone each year, I want to maximize the likelihood that it will last without needing replacement - even though I am extremely careful.
With that said, I also really like portability and value the aesthetically pleasing appearance of a device with case.
My previous device from last year (Note 2) was fitted with an Otterbox Commuter first, but then I decided to opt for the OEM Samsung snap on case (lightweight, minimal protection) that sold for about $20 CDN.
Before I get into the cases, a bit about the screen protector...
I am a proponent of screen protectors (as long as it does not feel too tacky to the touch) and from day one settled on the Spigen GLAS.tR Slim Tempered Glass protector for the Note 3. Spent a good few hours comparing different options and after purchasing a handful of different protectors prior, was just not wowed by any of them so gave the GLAS.tR from Spigen a go, and wow was it amazing. It may be possible that other companies offer similar (if not identical) glass protectors, but I was happy with this one. It was $39.99 CDN, but I believe there are some of the more cost effective brands that have similar tempered glass protectors as well.
On to the cases...
1. Spigen Neo Hybrid -- $35 CDN
Black back and option of six different colours for the frame - gold, red, white, slate, yellow and silver. Images below show the silver frame.
The case itself comes as two pieces - a thin TPU layer that encases the sides and back of the phone, along with a plastic piece that snaps around the four sides to hold it firm against the phone. The assembly process is quite straightforward and simple to execute. The packaging instructs to slip the TPU around the phone first prior to snapping the plastic outer part, but I have found that you can just as easily leave the two pieces of the case assembled together and simply snap the phone in. Once in, the phone is fit quite snug.
The phone fit with this case is rather slim. It will fit in just about any pocket and slide in/out with ease due to the smooth plastic material.
Port cutouts are all fine. Pen is removed without any problems, and access to both charging and headphone ports may be reached without having to uncover.
Pressing the power and volume rocker buttons are done so on the plastic frame. No issues with how they felt.
In regards to handling, while it feels nice in the hand, it is rather slippery and does not offer any grip whatsoever.
In terms of protection, it does a really good job of encasing the device to ensure there are no exposed edges/surfaces and will protect it well from scratches and light bumps. As for any sort of impact, I would not put much trust in it. The plastic is very thin and the ring around the edges is just that - plastic. A drop from waist-height onto a hard surface would surely scuff up and leave noticeable marks/dents on that polycarbonate piece. If you are not worried about the potential of dropping your phone, this is a very sleek case that offers a visually appealing look. For those wanting a case they can be confident in getting them through normal everyday use and not worrying about at least minor falls, I would recommend looking elsewhere.
2. Urban Armor Gear (UAG) -- $35 CDN
Four colour options to choose from - Aero (blue), Navigator (white), Outland (orange) and Scout (black). Images show Navigator white.
This case is one-piece, although it is apparently designed as a 'fused hard outer with soft impact resistant core' design as per the UAG website product description. The inner layer is not really all that soft though. I would say it is more like a single-layer construction style case. Installation of the case is very simple. The phone snaps right in, and is very snug - even more so than the Spigen Neo Hybrid. So one should not ever worry about the phone inadvertently coming out of the case - I would go so far as to say even upon impact. Something I liked about the design of the back was that the grooves provide for some grip with holding with one hand. Without this, the plastic back would not offer much grip to hold on to.
In terms of size, the case does not add very much bulk to the phone. Yes, it is a bit larger in both width and height compared to the Neo Hybrid, but still not a bulky case whatsoever.
Access to all ports done so with ease. There was an issue with the initial batch of these cases being released without the temperature and humidity sensor hole cutout. UAG offered to replace these for customers who did not have it on theirs, and apparently is no longer a problem with the current cases sold. The pen is removed easily and the camera cutout is adequate.
The buttons press fine, however they do have a somewhat hard 'plastic' feel to them when depressed. It does not pose a problem when pressing, but just a minor comment about the overall feel that felt different from the smoothness of pressing on the two Otterbox cases.
As for protection, this case sure looks pretty rugged from the back. It covers the phone well to prevent scratches and scuffs. I would say that the phone would be fine if dropped from waist-height, but a 'hard' drop may still leave the phone susceptible to some direct impact since the case itself is rather rigid.
Compared to the Spigen Neo Hybrid, the UAG no doubt offers much more protection. This just comes at the cost of it being very slightly thicker, wider and higher in dimension.
3. Otterbox Commuter -- $45 CDN
Comes in Black, Glacier (grey inner rubber, white outer plastic), Surf (dark blue inner, light blue outer), Merlot (purple inner, white-ish outer), Lily (purple inner, teal outer) and Berry (purple inner, red-ish outer). Gracier is shown in images.
This is a two-piece case that has a rubber inner layer around the phone and encased by a hard plastic outer shell that holds the rubber firm. Assembly is simple - once rubber layer is wrapped around the phone, slide either top or bottom edge against the plastic and press the opposite edge down so snaps snug in place. Once done, you may also need to lift open and close the headphone and charging port covers to ensure they are seated properly within the plastic shell.
Compared to the Note 2 Otterbox Commuter this one has a nicer feel to it. The rubber is held together very snug against the phone by the outer plastic, so there is no feeling of flimsy rubber as was the case with previous models. Because the back is plastic, it will slide in/out of a pocket rather well. As a result, it is however somewhat slippery in hand - but nowhere near as slippery as the Neo Hybrid. The rubber inner layer is exposed on the two upper and two bottom outer edges. This helps in adding the grip of the phone. The front facing lip of the rubber layer comes up past the plastic edges and also offers additional grip - this is something that stood out compared to the Neo Hybrid and UAG that I have to say made a big difference.
As mentioned, the headphone and charging ports are covered by a flap from the rubber layer. These are opened/closed easily. Removal of the pen is similar in ease as the UAG - the Neo hybrid was the narrowest of the three in terms of width of opening.
The volume rocker and power button feel very smooth, compared to the harder plastic feel of the UAG.
In terms of protection, this would offer much more impact protection than the UAG, and even more over the Neo Hybrid. I would feel confident in dropping the phone 6-feet in height onto hard surface anticipating only minor scuff damage to the plastic case. The front edge rubber lip comes up much higher above the screen than either of the Neo Hybrid or UAG edges - extra 1.5 to 2mm from the screen vs. those two.
All around, this has the most protection and the 'best feel' of the three so far. Very solid feel in hand.
4. Otterbox Defender -- $60 CDN
Just like the Commuter, this comes in Black, Glacier, Surf, Merlot, Lily and Berry colour combinations, as well as Blaze (black inner with orange and realtree graphic on back). Images show Glacier.
This is also a two-piece case, but compared to the Commuter (rubber inner & plastic outer) the Defender has a hard plastic inner with soft rubber outer layer. Assembly of this one is straightforward, however disassembly may be a bit difficult as the plastic clasps must be pressed in (to the phone) to release them. It is a snug fit, so it can be tricky until you get the hang of it. In addition, it also comes with a plastic screen protector built in to the plastic case layer. Compared to the Commuter, the rubber at the bottom edge also comes up to cover/protect the home button. Also, this case comes with a hard plastic belt clip/holster. I would probably not use it everyday, but I can see it being useful for people who are in environments that may benefit from the extra protection. With the screen facing down in the holster, it really feels safe and secure.
This case is the biggest of the four, however it was surprisingly quite compact when I first saw it. They redesigned it compared to how it was for the Note 2. Yes, it is thicker than the Commuter still, but just a little bit. It is a bit wider than the Commuter - maybe 2mm or so. Despite it's thicker dimensions, it still fits fine in most pockets - even slim jeans. Because the outer layer is rubber, it will not slide in/out as well as the other three though. On the plus side, the outer rubber layer is probably one of the most outstanding features of all the cases that surprised me. The enhanced grip it offers is absolutely amazing.
The built in screen protector is something that I did not like though. It feels OK and does sit rather well on the device's screen, but it's still not the same as an actual screen protector applied onto the device itself. After using the Defender and built in screen protector with the GLAS.tR for 3 days, I opted to remove/pop it out. So now I just have the tempered glass screen protector which feels way smoother and less affected by smudges.
The headphone and charging ports are protected by thicker feeling tabs compared to the Commuter. The opening for the pen actually feels just a hair-bit tighter than that of the Commuter's. From the looks of it, I am thinking this is because of how thick the rubber is around that corner.
The volume rocker and power buttons depress smooth and fine - pretty much identical to that of the Commuter's.
I am sure it is no surprise to anyone that the Defender offers way more protection than any of the three other cases. Even if the tactile rubber grip somehow fails your grasps, the impact protection this offers is second to none. I would probably feel confident in this phone dropping from two levels up onto hard surface.
Using this case everyday may not be for everyone though. Yes, it can fit in the pockets of slim jeans, but it may not be the silhouette one may want in their outfit. Sure, you could use the belt holster, but again, not everyone may want that look either.
I was very surprised how comfortable I felt by the end of the week of using the Defender. On the first couple days, it seemed like I was making an extra effort to carry it around. After the week, I could see myself really getting used to it.
Comparison Images
For all those who want to see the cases next to each other for dimension comparison purposes here they are...
OVERALL OPINION
There really is no 'best case for everyone'. It comes down to what you want and individual lifestyles and preferences. With that said, you need to determine how much protection you would like from a case.
I will say that of the four cases, the Otterbox Commuter comes out as the winner for me. It offers the most protection hands down with minimal bulk (although the defender is a close second). The UAG is a nice looking case from the back, but aside from that and the grooves for grip on the plastic back, there is not much special about it. Take into account the extra grip you get from the Commuter, and even more from the Defender, and they trump the UAG in that regard easily. The Neo Hybrid was disappointing for me as it not only did not offer much protection, it was also difficult to handle with its smooth-texture surface.
I do not regret having bought all four cases though - it's the price I'd gladly pay to ensure I find one that meets my expectations. The Commuter is now my everyday case, with the Defender being the one I change to here and there just to have a different look when I want to change things up. Even with slim pockets, the Commuter is still my choice over the slightly slimmer Neo Hybrid and UAG cases.
***************
I want to thank everyone who has reviewed a case for the Note 3. It had likely played a part in my decision making and am appreciative of the effort and time put in.
cheers,
Matt
Great reviews and thank you for taking the time & money to do this. I agree with you completely on the spigen neo hybrid review, tho it does look nice it has no grip and is more of a "for looks" type of case. Im rockin the ZL otterbox defender-lookalike case and it does a good enough job for me. I especially like the case since it provides for future modifications like extra room for microsd 2 sd card integration so you have your long lasting battery life, great protection and goliath like storage expansion
Sent from my SM-N900T using xda premium
I think the neo would protect from a small drop from waist height or something like that. The case would definitely not survive fully intact though the phone may well do. Not game to try it.
The UAG does stand up to drops quite well. It saved my Note 2 a couple of times, not only saving the phone but also with minimal scuffing to the case itself.
Even though I'm happy with the UAG, I'm tempted to try a commuter on the basis of this review. A bit more grip and port covers is certainly a tempting proposition.
Sent from my SM-N9005 using Tapatalk
I switch between UAG and Trident Cyclops. Both of them offer excellent protection ?
Sent from my Galaxy Note 3 ?
Thanks for the excellent review! I currently have a black Otterbox commuter and find the case to be nearly perfect in every aspect. I recently ordered a Spigen neo Hybrid in dante red just to change things up a bit and for a sleeker look.
Great stuff here, thanks for the great review. I have the UAG and love it, but am looking for a protective case with a better feel. After reading this, I'm eyeballing the Commuter as well.
Sent from my SM-N900V using XDA Premium 4 mobile app
Def a great review. Been checking out the commuter and UAG cases and definitely leaning towards the commuter now.
Sent from the big ol' Note 3
Haha I wish a review like this was posted before I went out and bought these cases myself. I have the Neo-Hyrbid, two UAGs (one is a replacement for the missing hole) and a Defender, in the exact same colors as reviewed.
I have to say that this is an great review and all of mattt33's review points are spot on. Of the three that I have, the Defender is my favorite for its protection, excellent grip and long-term holding comfort because of the soft outer shell. Comfort is very important to me because I do a good amount of gaming and media watching on my device. My only gripe about the Defender really has to do with the color choice. Anything other than black is going to show dirtiness after a while.
The Commuter does look great though, but I think I would miss the grip and soft-yet-solid feel of the Defender. I'd give it a try, but I'd never hear the end of it from my wife if she stumbled upon yet another case in the mail.
Completely different cases to compare. I have the neo hybrid, and also the uag, and the slim armor. I'd have to say I Love all of them for different reasons. But I usually use the slim armor. It just feels nice looks nice.
Guess where I landed right after ordering a Dante Red Spigen Neo Hybrid. !
Lol., It was merely a decision based on the looks. Didn't drop my Phone since the first day. So hope it will work out for me as i don't have an option to cancel or change the order.
Thanks for the review mate!
Great review. I actually own all of the Neo Hybrid colors. I am usually good with not droppinhg my phones. I like the look of them and am not bothered by the grip.
---------- Post added at 12:54 AM ---------- Previous post was at 12:50 AM ----------
JazonX said:
Guess where I landed right after ordering a Dante Red Spigen Neo Hybrid. !
Lol., It was merely a decision based on the looks. Didn't drop my Phone since the first day. So hope it will work out for me as i don't have an option to cancel or change the order.
Thanks for the review mate!
Click to expand...
Click to collapse
How has the case worked out for you?
I love Spigen Neo Hybrid but for me all cases in general makes the Note too big... Good review!
conamundas said:
Great review. I actually own all of the Neo Hybrid colors. I am usually good with not droppinhg my phones. I like the look of them and am not bothered by the grip.
---------- Post added at 12:54 AM ---------- Previous post was at 12:50 AM ----------
How has the case worked out for you?
Click to expand...
Click to collapse
Extremely Happy!
Only the original samsung Micro USB 2.0 Cable will fit when the case is on. Opening for the USB port on SPIGEN is small, so 3.0 cables will be unusable.
I love the look and feel of my Spigen Slim Armor case. It also protects fairly well from drops.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Details about Commuter
Wonderful review. After endless hours of research on cases, I thought I had narrowed my choices down to Trident AMS Kraken (since it had a kickstand as well) and the Ballistic Tough Jacket Maxx but this review completely changed my perspective. As such I am now highly considering the Otterbox Commuter. Although I prefer a kickstand, protection supersedes it. I just have a few questions for those who have used or have this case.
1) Are there any overall issues or concerns any of you that have or had the case?
2) Ease of access to the ports (i.e. being able to charge the phone?; being able to plug the 3.5mm earphone jacks in?)
3) Any concerns as far as rubber expanding (when phone heats up), not sitting tightly in place?
4) Any issues in conjunction with the use of a glass screen protector? I know the OP has one but the review was only for a week after, I'm concerned about longterm effect such as if its too tight bubbles may start to form.
5) The lip on the front side is much higher than the other cases. Does that affect the usability of the phone or cause any other problems?
Sorry for the numerous questions but finding the right case is imperative as I'll have this for 2 years.
snapper11 said:
1) Are there any overall issues or concerns any of you that have or had the case?
2) Ease of access to the ports (i.e. being able to charge the phone?; being able to plug the 3.5mm earphone jacks in?)
3) Any concerns as far as rubber expanding (when phone heats up), not sitting tightly in place?
4) Any issues in conjunction with the use of a glass screen protector? I know the OP has one but the review was only for a week after, I'm concerned about longterm effect such as if its too tight bubbles may start to form.
5) The lip on the front side is much higher than the other cases. Does that affect the usability of the phone or cause any other problems?
Click to expand...
Click to collapse
I have the Otterbox Defender, rather than the Commuter, but I believe they're similar enough for my answers to be helpful....
1) No overall issues or concerns from me.
2) I've had cases for other phones where the rubber flaps covering the ports were more of a nuisance than anything, and I ended up cutting them off. On this case though, they really don't get in the way, and they do wonders for keeping dirt and debris out. The cover over the charging port closes nice and tight, but is opened easily enough with one finger and some slight pressure (or a fingernail. It also opens far enough that the rubber isn't putting unnecessary pressure on the USB cable or the port when plugged in. The cover on the headphone jack also closes up good and tight, but is slightly more difficult to open, at least for me. Normal 3.5mm plugs fit in just fine, and as with the charging port cover, the rubber doesn't put any unnecessary or damaging stress on cables, when plugged in. I've only had an issue with one 3.5mm to RCA cable, that had a slightly wider rubber base than most, which required taking off the entire case to plug in, but I think that's due to it just being an old, cheap cable.
3) No problems with the rubber, even when left in the car in 100 degree plus Southwestern heat. It fits as snugly as it did when I bought it.
4) I use an iLoome 9h tempered glass screen protector. I cut the plastic one that is built into the Defender out with a razor, and a little over 6 months later, it still looks immaculate. No bubbles, peeling, or sliding. You honestly can't even tell there's a screen protector there, it's that nice. The added depth of the glass protector makes it a little harder to snap the 2 plastic halves of the case together, and I have accidentally broken 2 of the plastic tabs, but it still closes just fine without those 2, and to be frank, they were only broken due to carelessness on my part.
5) Don't quote me, but I think the lip on the Defender is slightly deeper than on the Commuter, and it hasn't caused me any problems. In fact, it does wonders for protecting the screen when placed face down. If you regularly use the Touchwiz feature that lets you take a screenshot by sliding the side of your hand across the screen, it makes doing so a little difficult in portrait orientation, but that's really just nitpicking.
Hope you find some of this helpful!
:beer:
Sent from my SM-N900T using XDA Premium 4 mobile app
lol.... Read threads for a few days... Ordered a Spigen NEO (on spiffy looks), but after reading more threads, Friday, I ordered another Commuter. Which I've had on all my phones (since like the Blackberry days), as well as some Defenders.. I just wanted to spice it up, and the Note 3 is so nice looking I was trying not to wrap it in Otterskin...
Eh well, I'll use the Spigen for dressing up, lol..
Thanks!
snapper11 said:
1) Are there any overall issues or concerns any of you that have or had the case?
2) Ease of access to the ports (i.e. being able to charge the phone?; being able to plug the 3.5mm earphone jacks in?)
3) Any concerns as far as rubber expanding (when phone heats up), not sitting tightly in place?
4) Any issues in conjunction with the use of a glass screen protector? I know the OP has one but the review was only for a week after, I'm concerned about longterm effect such as if its too tight bubbles may start to form.
5) The lip on the front side is much higher than the other cases. Does that affect the usability of the phone or cause any other problems?
Click to expand...
Click to collapse
I've got the Black version of the Commuter.
1) None
2) The flaps can be bend back fully without much issue, and they're solid enough not to tear whilst doing so. The plastic around the cutouts is about 2mm thick.
The official USB3 charger plug fits into the slot easily. There's about 2mm free space on the sides of the USB slot before the case starts. With the charging plug inserted, there's about 0.8mm free space between the plastic of the plug, and the plastic of the case on the sides, and 1mm at the top and bottom of the plug.
The headphone jack has 2.5mm around it, more than enough space for even a thick plug.
3) I've not noticed any reaction to heat in terms of expansion or contraction of the rubber. It's not that kind of rubber.
The only place it's a bit loose (you can bend it away-loose) is the front side with the volume rocker. But that may be my own doing as I can't stop playing with it. (I'm a bit OCD).
4) Don't have a glass one, I'm using the one that came with it as I currently can't afford a glass one.
5) It does on occassion get in the way a bit whilst swiping, particularly on the sides. As an upside, putting it face-down on the table is perfectly safe even on a rough, natural table. And it seals in all the light (which is great if you keep it on your nightstand!)
All in all, I'm happy with it
Oh, and removing/attaching it is easy, you can leave the thing in one piece and just pop it off at the top corners, and click it back in when you're done.
The thing I don't like about the Commuter is that the back is very slippery and slides around easily when placed on it's back. I have a compartment under the radio in my car and cannot put the phone in there with the screen up. When I accelerate like I usually do the phone slides right out, I had to place a piece of rubber type material in there to keep it from coming out.
very nice i will buy one
Hello fellow nexus 6 enthusiasts. I would like your opinion on cases and screen protectors to find the ones that best fit my needs if you could take the time to read below:
I have already experienced the horror of breaking my baby (ie nexus 6). A couple weeks ago it slipped out of my hand onto the unforgiving pavement and the screen made a horrific snapping sound. I knew before even looking at it that it was game over for my screen.
After sending it in to motorola and receiving a replacement phone a few days later (at the cost of $175, I highly recommend this for anyone in a similar dilemma of fixing a broken nexus 6), I have finally gotten this awesome phone back up and running and I want to make sure it never gets hurt again!
I currently have: a Ringke slim nexus 6 sf black case with a standard PoS screen protector that came with the case for free.
I am looking to get a very sturdy case. Not that I am planning on launching my phone at hard surfaces anytime soon, but I am definitely looking for some of the most sturdy cases to prevent such a horrific event from ever happening again.
I loved having a battery case on my galaxy s4 from mophie and generally would only compromise the slimness and height / width of the phone for extra battery power. While I do love to keep everything slim, if a case has far superior safety results to its competitors at the cost of adding on a little bulk, I'm willing to make the compromise.
Ideally I would love to invest in a screen protector that also gives me the most protection for the least amount of bulk added on. I've been reading about curved glass plates that can be applied to iphones that are having great results but haven't found anything about there being a version for the n6 yet.
Any advice from experience or general ratings / research would be much appreciated. I have been doing my own research and reading up on my options, but with so much out there on the market I could use the help narrowing down my options.
Thanks!
As far as screen protectors go TG is very hit and miss and I wouldn't recommend messing with them in their current state. I recommend the Spigen Crystal film plastic screen protector. It provides he most coverage (for plastic) and feels the best. I've tried 10+ different screen protectors including glass and this was by far the best option.
For a case there are many OP's in this section but I know you are looking for a heavy duty case. The Trident case seems to be excellent and youcan buy it on amazon here below. I don't like bulky cases so I use TPU cases. I like my SupCase Beetle with the frosted back and the Spigen Ultra hybrid (the buttons suck in the Spigen but it looks nice). I haven't dropped my Nexus yet. (I dropped one of my ones that I had to RMA and it was fine) but I'm sure the case would protect the phone quite well.
SupCase:
http://www.amazon.com/gp/aw/d/B00OHFGUDU/ref=mp_s_a_1_2?qid=1421506944&sr=8-2&pi=AC_SY200_QL40
Trident:
http://www.amazon.com/gp/aw/d/B00Q5A3QNC/ref=mp_s_a_1_1?qid=1421506907&sr=8-1&pi=AC_SY200_QL40
Spigen Crystal film:
http://www.amazon.com/gp/aw/d/B00P1...421506995&sr=8-2-fkmr0&pi=AC_SX110_SY165_QL70
Pilz said:
As far as screen protectors go TG is very hit and miss and I wouldn't recommend messing with them in their current state. I recommend the Spigen Crystal film plastic screen protector. It provides he most coverage (for plastic) and feels the best. I've tried 10+ different screen protectors including glass and this was by far the best option.
For a case there are many OP's in this section but I know you are looking for a heavy duty case. The Trident case seems to be excellent and youcan buy it on amazon here below. I don't like bulky cases so I use TPU cases. I like my SupCase Beetle with the frosted back and the Spigen Ultra hybrid (the buttons suck in the Spigen but it looks nice). I haven't dropped my Nexus yet. (I dropped one of my ones that I had to RMA and it was fine) but I'm sure the case would protect the phone quite well.
Click to expand...
Click to collapse
thanks for the input, I'll check those out. Why are tempered glass protectors hit or miss? I never used screen protectors / cases (besides battery cases) with the purpose of keeping my phone from exploding lol so I'm only recently reading up on them.
After experiencing the horror of dropping my nexus I never want that to happen again, but it's hard to figure out which cases actually make any difference in a fall. I'm betting my current case would do little to nothing since it's a flimsy piece of plastic, but all the other cases look pretty much the same lol.
screen protectors, they help protect the screen from shattering / cracking, correct? or are they just another piece of plastic that I shouldn't count on to save my phone in a potential tumble?
phallb said:
screen protectors, they help protect the screen from shattering / cracking, correct? or are they just another piece of plastic that I shouldn't count on to save my phone in a potential tumble?
Click to expand...
Click to collapse
They prevent scratches on the screen. If the phone falls, the screen protector is generally not going to protect the screen due to the lack of coverage to the very edges.
As for TGSP, I think the only two worth considering are the Orzly or the Jellycomb. All the others are cut too large and will not fully adhere to the screen, leaving a "halo" effect around the edges. Both of the above can be found on Amazon.
For cases you have a wide range of choices, my personal favorite after trying several is the Ringke Max. It's a solid case, IMO better than any Spigen available and will definitely protect your phone. At the same time, it's not overly bulky or large.
Another nice case that not many people talk about, maybe they don't even know it exists, is the PureGear Slim shell. Not as protective as the MAX but nicer looking IMO.
I waited a few weeks to review these to be able to give a more in depth review.
Zagg Curved HD: http://www.zagg.com/us/en_us/invisibleshield/samsung-galaxy-s7/glass-curve-samsung-galaxy-s7
This is Zagg's tempered glass, edge to edge screen protector. As most of you may know, yes it is dot matrix and therefore the adhesive is only present around the edges of the screen protector.
The application process was relatively easy. Washed my hands to make sure oil is off, aligned the top cut outs first and the rest of it fell in place. I would say it was a near perfect install based on where the home button, camera, sensors are in relation to the cut outs of the screen protector.
I first used it for a week with the RhinoShield bumper case. I am comfortable to say that the bumper case went quite nicely with the screen protector. there wasn't any major lifting except for one of the top corners where there was VERY minor lifting visible. The screen protector wasn't going anywhere even with the bumper case on. The protector felt nice when in use, finger glides just like the gorilla glass.
Onto the not so good points.
Significant loss of sensitivity. I couldn't wait to rip it off but I really wanted to give it a fair chance so I left it on for another week without the bumper case to see if it makes a difference. It didn't. I don't know how, but over time it actually got worse. Made typing and browsing really annoying. I guess because the glass only adheres around the edges, it also left a tiny bit of space between the the protector and the actual screen, therefore when I type it would make this tapping sound. The protector also adds a little bit of thickness to your phone, therefore the home button will be a bit depressed. And because of this bit of added thickness, even with the raised edge lips from the rhino shield bumper case, when my phone face planted in my bathroom, the Zagg protector cracked slightly. Now of course this could be different if you have a more heavy duty case which a more pronounced raised lip around the edges.
Rhino Shield bumper case: http://www.evolutivelabs.com/collec...cts/galaxy-s7-bumper-case?variant=12325884673
There is a video on youtube showing the protection that this bumper case provides, specifically for the s7. Mod Edit: Link removed. Page contains affiliate sales links. Not allowed on xda thanks!
There are more that shows the case with other phones. Their claim is it will protect the phone up to 11ft drop.
As I said above, if you are looking for a case that is somewhat friendly with the Zagg curved HD, this case would do the job.
Besides that, I must say I love this case because it's very light, adds very little bulk yet have a lot of real users backing up its level of protection.
The front and back of the bumper case have raised lips, more so on the back especially on the 4 corners. The buttons of the case are a tad bit harder to press in comparison to the Spigen I reviewed earlier, but it's still pretty responsive.
The only negative is that for some reason, one side of the case seems to be a LITTLE loose (side of the power button); it's not as snug as the other side. From a quick google search, It seems like the same issue exists with other phones and someone posted a response from Evolutive Labs saying that because the case is not made of TPU material, they purposely made the case not as snug such that it's easier to install the case . I am going to email Evolutive Labs about this and I will update this thread when I hear back. I must say tho this looseness is not noticeable when you are using the phone so it doesn't bother me. In fact it makes me feel more comfortable putting the case on with a screen protector since it's not going to bite into the screen protector as much.
Considering the Rhino Shield's price, would you say it's good value?
RebDovid said:
Considering the Rhino Shield's price, would you say it's good value?
Click to expand...
Click to collapse
Hard for me to give a personal opinion since our canadian dollar sucks right now, therefore after conversion it's actually 30-35 cad with shipping.
If I am in the states tho, I would definitely pick this over the other cases that are in the same price range based on the level of protection it provides while being a minimalistic case.
I think they would gain a lot more interest at $20 usd with more color options but then with more color options it may end up increasing their production cost.
Hey fellas!
I am looking for a premium looking case for my nexus 6.
My phone is white if it matters.
I did like a lot the Nilkin slim border, but its out of stock everywhere.
Also i have found this:
https://www.ebay.com/itm/Luxury-Sli...hash=item41939eb983:m:m2afeTHn0qE_nI9hygZ9iVg
Black aluminum borders.
Besides that, im looking for something that will give me a nice grip yet still make the phone look elegant and aesthetic.
Thanks!
I have that. It looks okay, but the quality is crap. I got rid of it right away.
My favorite Nexus 6 case is this one:
Ringke FUSION [Dust Cap/Drop Protection][CLEAR] Shock Absorption Bumper. (Available on Amazon)
It adds minimal bulk and fits like a glove.
I bought this case about 6mo ago, and have been very happy with it: https://www.ebay.com/itm/152687543728 (Not affiliated with the seller, just a happy customer)
Back is a clear, hard plastic (poly-carbonate?) and the "lip" is a firm TPU-type material. I've dropped it dozens of times with zero problems.
I've used the "S-shape" type cases for other phones in the past. A simpler, less "high-end" look, but they have tiny little "nubs" at the edges that give excellent grip. (Zoom in on pics to see):
https://www.ebay.com/sch/Cases-Cove..._from=R40&_nkw=nexus+6+s+tpu+case+-"nexus+6p"
Guyinlaca said:
My favorite Nexus 6 case is this one:
Ringke FUSION [Dust Cap/Drop Protection][CLEAR] Shock Absorption Bumper. (Available on Amazon)
It adds minimal bulk and fits like a glove.
Click to expand...
Click to collapse
I have this Ringke also and it is a good case, but I wouldn't consider it premium. It does provide adequate protection for minor bumps and falls. It has a large enough lip that my tempered glass screen protector doesn't scratch if I place the phone face-down on a table. The clear TPU yellows over time so it looks dingy though. Depending on how frequently you charge or use a headset, the dust caps can be annoying (of course they are easy to snip off the case if you like.)
Overall it is a very good case and the one I use most of the time, but particularly because of the yellowing of the clear plastic, I can't consider it a premium case.
I use a Spigen slim armor. Very nice looking and protects well. I had together it directly from Spigen though. I tried ordering one from a discounter and they send me a fake. It literally didn't even look like the real thing and lacked the kick stand and didn't even fit properly. They just printed Spigen on some random vaguly similar case and tried to pass it off.
Have had a number of cases over the years and I'm none rival the quality, feel, build, and just plain sexiness of the Seidio Dilex Pro. I'm the best kickstand case as the kickstand itself is metal as well as magnetic, it's also very sturdy. I went thru 2 Spigen Slim Armor kickstand cases after the plastic kickstands broke off then I discovered this beauty lol. Also rocking a Dbrand skin and no problems with the fit. Also the feel of the outside lip is great, more than enough to sit it face down, but formed and angled perfectly as to not in any way hinder using the screen. Seidio is also a big name company so the price is higher @ $29.99, over your run of the mill ebay cases, but as the famous saying goes, you get what you pay for lol.
https://www.amazon.com/Seidio-DILEX-Metal-Kickstand-Motorola/dp/B00S6TA3RW
Also might add that the way the metal kickstand is attached the area is flat which means sitting it on a table it will stay put instead of rocking back and forth lol. The butter shell of the 2 pieces is also covered (or made?) out of something that is pretty grippy, no slick plastic or rubbery TPU to deal with, using it for over a year in construction sites, factories, and other outdoor/dirty jobs it doesn't hold dirt or sweaty skin oils compared to others I've used, I wash mine bout once a month in hot water with dish soap and no warping, deforming, or most of all, fading, still black as the day I got it. And one last awesome thing that's soo small to be easily looked over but makes a huge difference when case makers don't do it is the side buttons, each one is individual, precision molded, and have a very satisfying feel when depressing them. It may be a tad bigger compared to bumpers or extremely thin shell cases which are barely a step up over a full Dbrand or (can't remember the other skin company) skin lol, I found myself loving the size, it's not full on OtterBox, but it still is thin enough to let me use it one handed which is whenever I'm doing anything but typing lol.
::Edit:: Oh yea, it comes in Black, Blue, Red, and White. Seidio also makes a Surface case with the metal kickstand as well and I'm sure it's just as high quality of a product I have not tried it myself and cannot attest to it's build, here is an Amazon listing tho if you would like to see it, it is one that includes a belt holster tho there are listings without the holster for cheaper.
https://www.amazon.com/Seidio-SURFACE-Kickstand-Holster-Motorola/dp/B00S6T9YTK
Hi all,
I have a spigen neoflex TPU protection on my s23 ultra, with a plastic spigen case.
I've bought an official Samsung leather case, and it seems really nice.
But, the neoflex is a bit to short on the sides, so that my finger feels the border of the screen protection every time I swipe left or right.
So, I would like to replace the neoflex with a tempered glass protection.
Do you know one who will fit well?
I have had a really bad experience with an Oppo find X5 pro : I've tested 5 tempered glass brands and every time my beautiful official Kevlar case unglued the tempered glass in the corners...
Thank you for your help
Whitestone dome or Spigen have been the best in my experience.
Avoid amfilm at all costs.
I have domeglass with leather samsung cover. In my opinion everything is fine. Of course glass not cover full screen and is about 1,5 mm smaller than all screen - safe "bumper" for covers.
I have too spigen optic armor and with domeglass is perfect fit, no one gap between case and glass but I seldom use this spigen.
Since S23 Ultra has a curved screen, I dont really think you should get a tempered cause either they dont cover the curved area or if they do, I dont really trust the protection they offer. For Curved Screen, I suggest getting a Screen Protector Film just to be safe. There is a Full-Body Screen Protector from Gadgetshieldz that covers the screen and other parts of the device like the sides, back and camera. Cases dont necessarily help with the scratches cause Ive seen multiple devices getting permanent marks inspite of the cases mostly due to the dust and things. So best to keep everything protected with either a Skin or a Full-Body protector. They also provide Skins if thats what you prefer.
Prakash_Raj said:
Cases dont necessarily help with the scratches cause Ive seen multiple devices getting permanent marks inspite of the cases mostly due to the dust and things
Click to expand...
Click to collapse
Exactly, I saw too. Refers to people who don't pull off case for months to clean
_GRIZZLY_ said:
Exactly, I saw too. Refers to people who don't pull off case for months to clean
Click to expand...
Click to collapse
Yaa I swear. All my previous devices had this issue. Ive used the best of the best cases and they still have these tiny scuffs which are permanent. This reduced the resale value of my devices and thats when I opted for this Full-Body Coverage cause I really dont mind spending a bit more to avoid these permanent damages. Im thinking of getting it wrapped with Skins next time.
So I am happy with still good stick fabric foil around frame .
Sometimes better use only minimalistic covers, not too bulky and happy with device than see scratches or crack after more time with angry tell "what was it for all this protections"
_GRIZZLY_ said:
So I am happy with still good stick fabric foil around frame .
Sometimes better use only minimalistic covers, not too bulky and happy with device than see scratches or crack after more time with angry tell "what was it for all this protections"
Click to expand...
Click to collapse
Both screen protectors and skins they provide barely adds any bulk. they are literally as thick as a sheet of paper and I dont think you can go any thinner