Rooting galaxy s5830 m/i/c step by step - Android Q&A, Help & Troubleshooting

Hey there!
I know how hard it is to find any information about how to root model Samsung Galaxy S5830 M/C/I. After rooting mine, I wanted to facilitate this info to the people that want to root their phones to.
NOTE: Once you root your phone you lose its guarantee. Also, I want to make very clear that you run your own risk. I'm not responsible for what may or not happen to your phone.
To get started I warn that this root is ONLY to users of models S5830 M/C/I.
1. First, you need to download the file in the link below either on your phone or computer. DON'T unzip it.
Because this is my first post, it won't let me paste a link. So you can private message me, and I'll give it to you.
-If you download it on your computer. Once you download it, you need to pass the file to your phone. Copy and paste it in your memory SD card. DON'T paste it in any folder.
-If you download it directly on your phone, you just need to move the file from the folder Downloads to the root of your SD card.
ONCE AGAIN. DON'T UNZIP THE FILE.
2. Now, you need to turn off your phone.
3. The next step is to enter into recovery mode. How do we do this? It's simple. Hold at the same time these buttons: home+volume up+power button. Hold these buttons till the logo shows up. Having this done recovery mode will appear.
-You move through the options using volume buttons (to go up and down), home button (enter) and power (back).
4. Now that you are on recovery mode you follow these exact steps.
-Apply update from sdcard
-AceGingerRootM.zip
-Reboot system now
5. Now your phone is rooted. Yay!
Once I rooted it I had no idea what to do with it. I looked info about it, and I found apps very very helpful for our model. Since it is very very slow.
One of the apps I TOTALLY recommend is Link2SD. You can get it from the Play Store, it is completely free, and completely useful. I use this app to delete all those apps that are pre-installed, and so tedious because we don-t use them, and we cannot delete them. Well, with this app you can do it. Also, this app allows you to move any app you want to your SD card. So you can say it is very very cool.
I hope you liked it. I accept any constructive critic. ENJOY IT :good::good:

mandradep said:
Hey there!
I know how hard it is to find any information about how to root model Samsung Galaxy S5830 M/C/I. After rooting mine, I wanted to facilitate this info to the people that want to root their phones to.
NOTE: Once you root your phone you lose its guarantee. Also, I want to make very clear that you run your own risk. I'm not responsible for what may or not happen to your phone.
To get started I warn that this root is ONLY to users of models S5830 M/C/I.
1. First, you need to download the file in the link below either on your phone or computer. DON'T unzip it.
Because this is my first post, it won't let me paste a link. So you can private message me, and I'll give it to you.
-If you download it on your computer. Once you download it, you need to pass the file to your phone. Copy and paste it in your memory SD card. DON'T paste it in any folder.
-If you download it directly on your phone, you just need to move the file from the folder Downloads to the root of your SD card.
ONCE AGAIN. DON'T UNZIP THE FILE.
2. Now, you need to turn off your phone.
3. The next step is to enter into recovery mode. How do we do this? It's simple. Hold at the same time these buttons: home+volume up+power button. Hold these buttons till the logo shows up. Having this done recovery mode will appear.
-You move through the options using volume buttons (to go up and down), home button (enter) and power (back).
4. Now that you are on recovery mode you follow these exact steps.
-Apply update from sdcard
-AceGingerRootM.zip
-Reboot system now
5. Now your phone is rooted. Yay!
Once I rooted it I had no idea what to do with it. I looked info about it, and I found apps very very helpful for our model. Since it is very very slow.
One of the apps I TOTALLY recommend is Link2SD. You can get it from the Play Store, it is completely free, and completely useful. I use this app to delete all those apps that are pre-installed, and so tedious because we don-t use them, and we cannot delete them. Well, with this app you can do it. Also, this app allows you to move any app you want to your SD card. So you can say it is very very cool.
I hope you liked it. I accept any constructive critic. ENJOY IT :good::good:
Click to expand...
Click to collapse
Thanks so much....i will do it now

Related

** New Root/Debrand/update to 2.1 tutorial for x10 mini (E10A) **

Okay, here's the tutorial and downloads for all you x10 mini (e10a) people out there who want to root + debrand + update to 2.1
Here's a link to a vid i made for this procedure and the outcome once done:
http://www.youtube.com/watch?v=JIojWZkraZ0
Here's a link for the software to root your phone and add customisation:
http://forum.xda-developers.com/showpost.php?p=8976947&postcount=1
Here's a link to root Explorer.apk:
http://www.4shared.com/file/IdOkM8of/Root_Explorer_Vs_2102.htm
Here's the link to the claro build.prop file:
http://forum.xda-developers.com/showthread.php?t=820009&page=4
Here's a link to the problem i faced and how i resolved it:
http://forum.xda-developers.com/showthread.php?t=854457
here's a link to sony's update utility:
http://www.sonyericsson.com/cws/sup...eserviceapplication/xperiax10mini?cc=gb&lc=en
procedure:
1. download and extract to you descktop the newest GUI flashtool
2. in your phone go to settings ->applications-> and check unknown sources
3. in settings ->applications-> development-> check usb debugging
4. in you extract flashtool folder that should be on your desktop you will see a flash.bat file, open it to start program.
5. click on root and follow the procedure to start z4root and allow it to root and restart your phone, do not manually restart you phone, z4root will automatically restart your phone for you.
6. once your phone is completly restarted and functional, colse the flash.bat program and re-open it from the extracted program.
7. click on customise and allow it to fully install the applications, it will tell you finished when done.
8. mount your phone's sd card to your pc
9. download the root explorer.apk file from the download link provided and save it on you desktop.
10.copy the root explorer file from your desktop to the root of your sd card (do not put it in any folder)
11. unmount phone to computer
12. you will see on your phone that you have a program called astro, open the program,
13.in astro, navigate to your sd card and install root explorer.apk
14. once installed, exit out of astro
15. mount you phone again to your pc and create a new folder on the root of your sd card called new build, and create another folder called old build.
16. download the two build.prop files supplied in my download link and save it to your pc's desktop.
17. now open the build folder on your desktop and you will see two files, one called build.prop.claro and another called build.prop.vivo.
18.delete the build.prop.vivo file.
19. right click and rename the build.prop.claro file to build.prop (delete the .claro part)
20.drag and drop that file to you new build folder you created on your sd card.
21.unmount your phone from you pc.
22. on your phone, open root eplorer
23. scroll down to SYSTEM
24. find the build.prop file and copy it
25. back out of the SYSTEM folder and scroll down to the SD CARD
26. paste the copied build.prop file to the old build folder you had created on your sd card (its basically a backup in case you ever mess up)
27. now in root explorer, go to you SD CARD and copy the build.prop file from your new build folder that you initially downloaded and renamed.
28. scroll back to SYSTEM and click on the r/w button on the top left of screen
29. then past and overwrite the file
30.now exit out of the program and restart you phone.
31. don't worry if you phone menu system looks kinda wonky or doesn't really work properly once your phone has restarted. just make sure its fully rebooted
32.download and install the sony ericsson update service program from the download link supplied.
33. accept the terms and follow the instructions... (it will ask you to put your phone in recover mode by turning off your phone and pressing the back button while plugging in your phone via usb) you can make this process quicker by simply already having your phone plugged in and simply pressing and holding the top power button+back button+home button until the green light remains on.
34. the program will tell you that there is new software available for your phone
35. install and enjoy 2.5
Extras step to making the experience even better!
i personally don't like the boot animation of the new 2.1 update and would rather not have the claro operator logo at the boot startup. the way to do that is:
root your phone again by following my instructions earlier, and install the root explorer.apk file again from your sd card. once your have root explorer installed and working navigate to SYSTEM and then to MEDIA. in media you will see a bootanimation.zip file, simply delete it.
Now for removing bloatware (operator specific applications):
to remove application that may be of annoyance, just go into root explorer again and navigate to SYSTEM and the to APP and dele and .apk files that are programs like ei: claro.apk... make sure you press the r/w button whenever you want to delete or overwrite something in SYSTEM. And be aware that if you don't know what your doing, you can brick your phone. SO BE CAREFUL!
And finally, as most would already know, this is all at your own risk. Sometimes its better to leave these types of hacks alone if you don't know what your doing.
I take no responsibility or credit for any of these hacks. thanks to all the members on XDA Developers for your support and help.
There are steps to make it simpler ... which is independent of the version they have in the cell (2.1 Uk or other ... 1.6) is achieved by having the American firm ... thus reduce it without diminishing the tutorial: alex0983
1. Planet app install
2. Find and install z4root
3. Permamente root install and follow instructions, the phone will reboot ...
4. In Planet app also find the Root Explorer and install ...
5. Connect the phone and copy the build.pro (Claro) to the SD and disconnect
6. Open root explorer and if I get a message to: super user ... allow him ....
7. mounted R / W. ... go the SD route where the build.prop copy and recopy this time from root explorer and find the path: / system and replace the phone ....
8. Turn off the phone ....
9. Connecting to Seus and select repair ...! and ready ... your phone now is American again! And firmware 2.1
10. To remove things Claro, just make the points 1,2,3,4! then the path / system / media to copy the boot loader found in the forum and in the path / system / app to delete the applications they say. clear (remember to mounted R / W)
I hope you find it useful! And that worked for me! Obviously, thanks to your tutorial alex0983 which also served me as a whole, but I found the quickest way!
Sorry for my bad english!
re:
hey no problem, i'm glad you found it useful. Sorry for the 35+ steps... I just wanted to make it easy to follow for people who had never done something like this before. Just trying to help ppl.
Actually the tutorial is very well prepared but no longer so necessary to the root from the phone! And for that we are in the community to help and facilitate the process to other users!
Kudos for you alex0983 and kloriahdez, thanks for your posts!!!
hi alex,
im stuck at no 22.
when i try to open root explorer, i get:
root explorer has not yet managed to obtain root access. because of issues with superuser, this often happens the first time the app is run but is usually fine from then on.
im new to android phones, that is why im relying on your step by step tutorial. but now im stuck with superuser/root explorer issue
This...
I will take a Xperia X10 mini later (my new phone,now i have widfire, but is tu big ) , i will try to root in this night, let ou guys the results
Good damn!
Work, perfect, but when i wass try to install app2sd after my phone, won t let install any apps, and ...lol no wirless conection Wi Fi , or GSM . ( free space on phone 173 Mb ).
I manage to resolve all with a repair from update , on Zeus ( good luck i wass made this update first ... but i think it can be working for the first update ).
i will try this night again , and i will send results later.
Yes good damn now my phone enter in boot looping ..... on the first boot won t start after that i wass tryng to repair with Sony repair and tell me the soft is still not availlble . How ca i arestore to 2.1 ? i put the build.prop like you write ... and now i can even start my phone. How i can make the old again?
_________________________________
Finaly managed this with flash tools . guys don t try this with already upgraded version to 2.1 ( you will be stuck in boot looping), is god to root, but only this in my case.
Root work.
noob with problem
I'm getting some problems in open the root explorer. The x10 mini is rooted (i run the rom manager without error), but when i run the root maneger, i recive the error "Root explorer has not yet managed to obtain rot acces. /because of issues with superuser, this often happens the first time the app is run but usually fine from then on. /click ok and restart the app to try again. /makesure you respond correctly the superuser prompt". I've got this erro always i open the program. I've reinstall it and the problens still. What i'm doing wrong?
Sorry the bad english, and thx to the help
Hi
I have 2.1 update 1 version
Should this procedure work with this or it won't work
If not, how to root the phone?
I mentioned that kingoldstyle had the same problem. I also updated the phone prior to doing this procedure.
So, maybe kingoldstyle can help me with rooting?
How to use flashing tools?
Thanks.
problems
im stuck ant no 28, whats a r/w button? and when i try to paste the build tells me: you cannot paste here because the file system is read-only. help me please

Root method for Linux?

I looked all over the Dev area, but the one click is only icrap or Winblows... Any one know of any Root method for someone running Linux?
imbonez9 said:
I looked all over the Dev area, but the one click is only icrap or Winblows... Any one know of any Root method for someone running Linux?
Click to expand...
Click to collapse
There is a linux binary
Read the .bat and manually type the commands
Sent from my HTC_Amaze_4G using Tapatalk
you should not be using linux if you not able to read bat files
I KNOW how to read bat files. And I highly doubt anyone on these forums are in a position to tell me or even suggest to me what i should/shouldn't be using
It can be done without a computer completely.
Download ClockworkMod Recovery from here, and then follow these directions.
Binary100100 said:
Technically you dont need to run the .bat script anymore.
Simply place the PH85IMG.zip file on the root of your external sdcard then completely shut off your phone.
Hold the volume down button (NOT VOLUME UP) while pressing the power button. Hold them until the white screen comes on.
At the top it should say either S-OFF or Unlocked.
It will automatically scan the contents of your sdcard and located a flashable .zip file then ask you if you want to upgrade. Volume Up for yes, Volume Down for no.
Press the volume up button and allow it to reboot.
Download ROM Manager from the Market if you haven't done so already.
Select Download ROM then Superuser.
Select Superuser 3.0.6 efgh (or later if there is one) and then download.
It will then prompt you to Reboot and Install. Press OK.
It should install just fine and reboot automatically.
If it doesn't... you will possibly find it in /sdcard/clockworkmod/download/downloads.androidsu.com/superuser directory.
Just move it to the root of your external sdcard.
Back in ROM Manager select Reboot into Recovery.
Then select install zip from sdcard.
Select choose zip from sdcard.
Select Superuser-3.0.6-efgh-signed.zip
Reboot with full root!
Pretty easy and no pc necessary!
Click to expand...
Click to collapse

can not access to play store

something strange just happened
on my rooted nook tablet i can't access to google play store
it say "you must add an account to the device to continue. do u want to add an account now"
and when i click on YES it closes everything and goes back on the main screen
and also Gallery - Email - Talk have the same icons with the android logo
is this related to the fact that the software has been updated to the new version 1.4.3?
should i root it again?
thanks a lot
WhiterabbitITA said:
is this related to the fact that the software has been updated to the new version 1.4.3?
Click to expand...
Click to collapse
Yep. Reroot using the sdcard method and everything should go back to normal. A system update breaks root as it modifies the /system/apps/ directory which is where superuser/google play are stored when rooting.
helpppppp
i was trying to reboot using that method
http://forum.xda-developers.com/showpost.php?p=21895025&postcount=14
i need help because something went wrong
Instructions:
Download the packages listed in the download folder, and extract them to your desktop.
extract ALL the files from the single zip.
NOTE: Do not extract the .zip with superuser and su.
Open the image flasher .exe, and browse for the .img that you extracted from the same zip
Put your SD Card into your nook or reader, and select the drive letter from the drop down on the right.
Press write, and wait
Once it has completed open the SD Card from the Windows browser and place the .zip in the root of the SD card.
Turn your Nook off.
Turn your Nook on while holding both the N+Power button. Your device will turn on, and then turn off after holding it.
NOTE: Do not let go of either button until your device has powered on and off again.
Put the SD Card into your nook.
NOTE: If it is already in there eject it and then put it back in.
Power your Nook on normally.
You will see a picture of N on the screen followed by a box with a white background followed by CWM booting up.
Select flash update.zip.nothing like that on the menu
i have rebbot system, install zip from sd card and selecting YES goes to Installation aborted
what to do?
Select Select from SD card.
Select your .zip
Reboot device
NOTE: Remove the SD card after your device reboots as if you don't it will continue to boot from the SD card.
I think I'm having this same problem.
WhiterabbitITA said:
i was trying to reboot using that method
http://forum.xda-developers.com/showpost.php?p=21895025&postcount=14
i need help because something went wrong
Instructions:
Download the packages listed in the download folder, and extract them to your desktop.
extract ALL the files from the single zip.
NOTE: Do not extract the .zip with superuser and su.
Open the image flasher .exe, and browse for the .img that you extracted from the same zip
Put your SD Card into your nook or reader, and select the drive letter from the drop down on the right.
Press write, and wait
Once it has completed open the SD Card from the Windows browser and place the .zip in the root of the SD card.
Turn your Nook off.
Turn your Nook on while holding both the N+Power button. Your device will turn on, and then turn off after holding it.
NOTE: Do not let go of either button until your device has powered on and off again.
Put the SD Card into your nook.
NOTE: If it is already in there eject it and then put it back in.
Power your Nook on normally.
You will see a picture of N on the screen followed by a box with a white background followed by CWM booting up.
Select flash update.zip.nothing like that on the menu
i have rebbot system, install zip from sd card and selecting YES goes to Installation aborted
what to do?
Select Select from SD card.
Select your .zip
Reboot device
NOTE: Remove the SD card after your device reboots as if you don't it will continue to boot from the SD card.
Click to expand...
Click to collapse
Hopefully, someone can help me with this, as I seem to be having a similar problem. I am familiar with how to root the nook tablet, and have done so already, but since then, I believe the firmware updated, breaking my root. I am afraid to do it again, because when I first rooted the tablet, a game on it didn't work properly, and only worked properly after the update. Will this new root process cause any existing games to stop working? And how do I then prevent future firmware updates from breaking my root, again?
RooterBooter said:
Hopefully, someone can help me with this, as I seem to be having a similar problem. I am familiar with how to root the nook tablet, and have done so already, but since then, I believe the firmware updated, breaking my root. I am afraid to do it again, because when I first rooted the tablet, a game on it didn't work properly, and only worked properly after the update. Will this new root process cause any existing games to stop working? And how do I then prevent future firmware updates from breaking my root, again?
Click to expand...
Click to collapse
simple answer for avoising breaking root is to install a custom rom
Sent from my Nook Tablet CM7 BETA using xda premium app
RooterBooter said:
Hopefully, someone can help me with this, as I seem to be having a similar problem. I am familiar with how to root the nook tablet, and have done so already, but since then, I believe the firmware updated, breaking my root. I am afraid to do it again, because when I first rooted the tablet, a game on it didn't work properly, and only worked properly after the update. Will this new root process cause any existing games to stop working? And how do I then prevent future firmware updates from breaking my root, again?
Click to expand...
Click to collapse
or install custom recovery (cwm) if you wish to continue to use stock
without stock recovery B&N can't send you updates
How do I tell if I'm using stock recovery or custom recovery?
tobdaryl said:
or install custom recovery (cwm) if you wish to continue to use stock
without stock recovery B&N can't send you updates
Click to expand...
Click to collapse
I used Albert Wertz's method for rooting using an sd card, and had no problems, except that I didn't go as far as to block the OTA updates. Is it possible to have a custom recovery and stock recovery on the same device? How do I tell, and how do I safely install cwm, without being able to use Titanium Backup (since my root is now broken)?
deleted because of multiple posts linked.
I have now booted into mac instead of ubuntu in an attempt to fix.
Looks as if I got caught in xda update!
It's still not correct but better now.
WhiterabbitITA said:
i was trying to reboot using that method
http://forum.xda-developers.com/showpost.php?p=21895025&postcount=14
i need help because something went wrong
Instructions:
Download the packages listed in the download folder, and extract them to your desktop.
extract ALL the files from the single zip.
NOTE: Do not extract the .zip with superuser and su.
Open the image flasher .exe, and browse for the .img that you extracted from the same zip
Put your SD Card into your nook or reader, and select the drive letter from the drop down on the right.
Press write, and wait
Once it has completed open the SD Card from the Windows browser and place the .zip in the root of the SD card.
Turn your Nook off.
Turn your Nook on while holding both the N+Power button. Your device will turn on, and then turn off after holding it.
NOTE: Do not let go of either button until your device has powered on and off again.
Put the SD Card into your nook.
NOTE: If it is already in there eject it and then put it back in.
Power your Nook on normally.
You will see a picture of N on the screen followed by a box with a white background followed by CWM booting up.
Select flash update.zip.nothing like that on the menu
i have rebbot system, install zip from sd card and selecting YES goes to Installation aborted
what to do?
Select Select from SD card.
Select your .zip
Reboot device
NOTE: Remove the SD card after your device reboots as if you don't it will continue to boot from the SD card.
Click to expand...
Click to collapse
From main menu (first screen after cardboard box)
select - install zip from sdcard
next -
select - apply /sdcard/update.zip
next -
N down and select YES
---------- Post added 15th August 2012 at 12:16 AM ---------- Previous post was 14th August 2012 at 11:36 PM ----------
RooterBooter said:
I used Albert Wertz's method for rooting using an sd card, and had no problems, except that I didn't go as far as to block the OTA updates. Is it possible to have a custom recovery and stock recovery on the same device? How do I tell, and how do I safely install cwm, without being able to use Titanium Backup (since my root is now broken)?
Click to expand...
Click to collapse
No, there is one partition designated for recovery. You can run cwm from sdcard when you wish and keep stock recovery internal, but custom recovery is the only way I have seen that absolutely blocks otas (otas are blocked with custom rom also) if that is your concern. To tell about your recovery the only thing I can think of is the power and N key into recovery. If you read what is presented on the screen when it appears and refuse a reset you are safe, that takes care of stock, if you are nervous reread and take your time. For cwm if that is installed you will see a cardboard box flash and then a menu with the first item to reboot, that is also safe.
To get into either recovery (for looking) from power off press and hold power and N, after two seconds release power, after one or two more seconds release N also. That should do it.
If you wish to have absolutely what to click when you get stock recovery just wait a while and I'll come back and edit this post to reflect that info. At the moment have something else going on (NT) I can't stop.
Stock recovery shows Factory reset
do you want to reset your device to the factory default?
Press POWER key to exit
Press Home key to continue
press power and you are out and safe
Installing CWM recovery! There are now two apps(they require root) here on xda for that purpose, one is 16gig only (Nook Tab Recovery Flasher) by indirect the other is 8gig and I don't know who did it.
There are also flash zips for each and a flash zip that is both 8gig and 16gig. If you are 8gig make sure you choose one for 8gig
CWM sdcard with a flash zip does not require root.

How to root nextbook 7

Nextbook 7
AML8726-MX Dual core chipset
DDR3 1gb
Android OS 4.1.1
I need help on rooting my nextbook 7... i have zero knowledge on rooting tablets and i also want to know how to undo the rooting if i brick my tab...This is my first time posting here.. thank you in advance
Next7P12-8G Root Screen Shots
potzken said:
Nextbook 7
AML8726-MX Dual core chipset
DDR3 1gb
Android OS 4.1.1
I need help on rooting my nextbook 7... i have zero knowledge on rooting tablets and i also want to know how to undo the rooting if i brick my tab...This is my first time posting here.. thank you in advance
Click to expand...
Click to collapse
............
Well, this is my first post here as well. I uploaded some screenshots of the recovery screen, after downloading a (supposed ROM) to my external SD card from freaktab...(I can't include the link cuz I'm a noob)...just google this tablet model number and you'll find the thread with the ROM attachments.
Needless to say, the root didn't work, and I was wondering what I did wrong as well...
Nextbook 7 Premium SE (so says the generic insert that came in the box), but the model number is Next7P12-8G.
Yeah, I watched the noob video, and scoured all the threads. This device isn't even listed. Anywhere.
Don't know if these pics will help anyone, but as far as I can tell, getting to this screen is at least a start, as finding just how to put this device into recovery mode was chore in itself; to do that you must power it down, and once the device is completely powered off, hold down the power and volume control/down button (-) simultaneously until you see the update screen (in direct contradiction to what the instruction manual says- there is no "reset button" to be accessed through a pin hole)...then immediately release.
Well, good luck. If anyone can figure out how to root this thing, please let me know! Thanks!
*************EDIT*********************
Originally Posted by shaunmt View Post
It's pretty simple:
1. Download the modified recovery .zip file.
2. Unzip the recovery file.
3. Put the "uImage_recovery" file from the recovery .zip on your external SD Card.
4. Download the root .zip file. (Do NOT Unzip)
5. place the root .zip file on your external SD Card.
6. Turn off tablet, put SD Card in (if not already in)
7. Hold Volume and Power. (Tablet will boot into the modified recovery it finds on the SD card)
8. Choose install from EXT. (Volume keys to navigate list, Power button to select.)
9. Choose the root .zip file.
10. Wait for finish.
11. Reboot.
12. Download your choice of Supersu or Superuser from the Play Store.
Note: There is NO need to flash the ROM if you just want ROOT. The ROM is only needed by people who have screwed up their firmware.
Works great. Thanks to Shaunmt at freaktab.com
Originally Posted by shaunmt View Post
It's pretty simple:
1. Download the modified recovery .zip file.
2. Unzip the recovery file.
3. Put the "uImage_recovery" file from the recovery .zip on your external SD Card.
4. Download the root .zip file. (Do NOT Unzip)
5. place the root .zip file on your external SD Card.
6. Turn off tablet, put SD Card in (if not already in)
7. Hold Volume and Power. (Tablet will boot into the modified recovery it finds on the SD card)
8. Choose install from EXT. (Volume keys to navigate list, Power button to select.)
9. Choose the root .zip file.
10. Wait for finish.
11. Reboot.
12. Download your choice of Supersu or Superuser from the Play Store.
Note: There is NO need to flash the ROM if you just want ROOT. The ROM is only needed by people who have screwed up their firmware.
-> So, to root my Nextbook 7 all i have to do is follow these steps? Where can i find the files needed? Is this really working, have you tried it? I just want to root my tab.. thanks
This Root Works for Next7P12-8G
Yes Sir, it works! I rooted all 3 of my kids' Christmas tablets (lol)... Here's the link:
Well, I can't attach the link due to forum rules (this is only my 3rd post, I guess you need 10 before you can attach outside links...) So, copy and paste this phrase into Google and it should be the first one that comes up:
Amlogic Next7P12-8G Modified Recovery - Stock Rom & Flashable Root
Just download the first and third (links) on this page, as the middle one is a ROM (which is explained on the page, as only being necessary in case you have a corrupt one and need to fix it- it's not a mod). All you need is the modified recovery file and root zip file. Just read the thread, follow the above instructions (which are also located within the thread), and you'll be good to go!
potzken said:
Originally Posted by shaunmt View Post
It's pretty simple:
1. Download the modified recovery .zip file.
2. Unzip the recovery file.
3. Put the "uImage_recovery" file from the recovery .zip on your external SD Card.
4. Download the root .zip file. (Do NOT Unzip)
5. place the root .zip file on your external SD Card.
6. Turn off tablet, put SD Card in (if not already in)
7. Hold Volume and Power. (Tablet will boot into the modified recovery it finds on the SD card)
8. Choose install from EXT. (Volume keys to navigate list, Power button to select.)
9. Choose the root .zip file.
10. Wait for finish.
11. Reboot.
12. Download your choice of Supersu or Superuser from the Play Store.
Note: There is NO need to flash the ROM if you just want ROOT. The ROM is only needed by people who have screwed up their firmware.
-> So, to root my Nextbook 7 all i have to do is follow these steps? Where can i find the files needed? Is this really working, have you tried it? I just want to root my tab.. thanks
Click to expand...
Click to collapse
Question about rooting
Well, this is my first post here as well. I uploaded some screenshots of the recovery screen, after downloading a (supposed ROM) to my external SD card from freaktab...(I can't include the link cuz I'm a noob)...just google this tablet model number and you'll find the thread with the ROM attachments.
Needless to say, the root didn't work, and I was wondering what I did wrong as well...
Nextbook 7 Premium SE (so says the generic insert that came in the box), but the model number is Next7P12-8G.
Yeah, I watched the noob video, and scoured all the threads. This device isn't even listed. Anywhere.
Don't know if these pics will help anyone, but as far as I can tell, getting to this screen is at least a start, as finding just how to put this device into recovery mode was chore in itself; to do that you must power it down, and once the device is completely powered off, hold down the power and volume control/down button (-) simultaneously until you see the update screen (in direct contradiction to what the instruction manual says- there is no "reset button" to be accessed through a pin hole)...then immediately release.
Well, good luck. If anyone can figure out how to root this thing, please let me know! Thanks!
*************EDIT*********************
Originally Posted by shaunmt View Post
It's pretty simple:
1. Download the modified recovery .zip file.
2. Unzip the recovery file.
3. Put the "uImage_recovery" file from the recovery .zip on your external SD Card.
4. Download the root .zip file. (Do NOT Unzip)
5. place the root .zip file on your external SD Card.
6. Turn off tablet, put SD Card in (if not already in)
7. Hold Volume and Power. (Tablet will boot into the modified recovery it finds on the SD card)
8. Choose install from EXT. (Volume keys to navigate list, Power button to select.)
9. Choose the root .zip file.
10. Wait for finish.
11. Reboot.
12. Download your choice of Supersu or Superuser from the Play Store.
Note: There is NO need to flash the ROM if you just want ROOT. The ROM is only needed by people who have screwed up their firmware.
Works great. Thanks to Shaunmt at freaktab.com[/QUOTE]
question about same model number but different processors
Hi I noticed the model number for this Next7P12-8G, well I ordered one from Walmart and am expecting to get it this week. I noticed even though the model number I am getting is the same, the one I am getting has the 1GHz Cortex A9 processor instead if the dual listed above. Do you know if the rooting process would be the same as the dual? This is the efun nextbook7p12-8 that is on sale on Walmart.com right now for 64.99 or something. Has anyone tried this lately? Thanks in advance
Follow this!
Hi! I am new to this site. I have Nextbook too and its rooted. This METHOD WORKS 100%
Follow this video: goo.gl/vl0kI7
The video doesn't explain it very good, so do the best as you can. DON'T FORGET TO READ THE DESCRIPTION
Thanks
Good work
nextbookroot13 said:
Yes Sir, it works! I rooted all 3 of my kids' Christmas tablets (lol)... Here's the link:
Well, I can't attach the link due to forum rules (this is only my 3rd post, I guess you need 10 before you can attach outside links...) So, copy and paste this phrase into Google and it should be the first one that comes up:
Amlogic Next7P12-8G Modified Recovery - Stock Rom & Flashable Root
Just download the first and third (links) on this page, as the middle one is a ROM (which is explained on the page, as only being necessary in case you have a corrupt one and need to fix it- it's not a mod). All you need is the modified recovery file and root zip file. Just read the thread, follow the above instructions (which are also located within the thread), and you'll be good to go!
Click to expand...
Click to collapse
excuse me, but the links that you refer are not available, well only is available the last one, but it didn't work for me.
Can some one help me with the links of download?
tecno_allende said:
excuse me, but the links that you refer are not available, well only is available the last one, but it didn't work for me.
Can some one help me with the links of download?
Click to expand...
Click to collapse
Found it at freaktab.com the root package is Kiser(sp?) Root just search root nextbook on freaktab
Would have posted link as well but I also am a noob and thus is my first post
its work
potzken said:
Nextbook 7
AML8726-MX Dual core chipset
DDR3 1gb
Android OS 4.1.1
I need help on rooting my nextbook 7... i have zero knowledge on rooting tablets and i also want to know how to undo the rooting if i brick my tab...This is my first time posting here.. thank you in advance
Click to expand...
Click to collapse
1. Download the modified recovery .zip file.
2. Unzip the recovery file.
3. Put the "uImage_recovery" file from the recovery .zip on your external SD Card.
4. Download the root .zip file. (Do NOT Unzip)
5. place the root .zip file on your external SD Card.
6. Turn off tablet, put SD Card in (if not already in)
7. Hold Volume and Power. (Tablet will boot into the modified recovery it finds on the SD card)
8. Choose install from EXT. (Volume keys to navigate list, Power button to select.)
9. Choose the root .zip file.
10. Wait for finish.
11. Reboot.
12. Download your choice of Supersu or Superuser from the Play Store.
Nextbook model: next7100kld can be root?
hi i want to root my tablet please give me guide how to root it or can it be rooted.? thanks cheese
Kingaroot!
potzken said:
Nextbook 7
AML8726-MX Dual core chipset
DDR3 1gb
Android OS 4.1.1
I need help on rooting my nextbook 7... i have zero knowledge on rooting tablets and i also want to know how to undo the rooting if i brick my tab...This is my first time posting here.. thank you in advance
Click to expand...
Click to collapse
My little brother had this tab and I figured it out! I am not responsible if anything happens (it hopefully won't) search kingaroot it should be some jap site, download the app that should have a phone right next to it, and that will root this device. Just uninstall the app afterward.
Anybody else having issues with touch when TWRP loads ?

[Q] How to root Moto E (updated to 4.4.4) ?

I have a Motorola Moto E(XT1022). I bought it recently and just when I first started it, I got the 4.4.4 kitkat update and so I downloaded it right away. Then I realised one of the biggest problems of Moto E i.e. 2.2 gb storage. So i dug into find how to install apps on sd card and got to know that you have to root the phone. On xda, I found various ways to root but they were only for the 4.4.2 version of the phone and others were update to 4.4.4 on aldready rooted devices. Please tell me the way to root my device. Also as I am new to this, I dont understand any words like bootloader, fast recovery, etc. Please help me. Thank you in advance.
Edit: Can I use the way given by deej_roamer in his post here:http://forum.xda-developers.com/show....php?t=2755336
Edit: I am sorry to have posted this in the general section. I don't know how to move it now to the questions section. Sorry again.
Thank You DAVI FELICANO and deej_roamer for their help. I have now successfully rooted my phone. If someone else has a problem, go to Page 2 for the solution.
You can use the defalt method, dont need to change anything.
Who told you that you need root to move apps to sd card?
Once you insert sd card you will get an option in settings/apps to move apps to sd card for those that can be moved.
This is though limited to Apks only and data is still kept in internal sd card.
If this option is not enough for you then you can go the advanced wag by rooting and using gl2sd or link2sd like apps.
DAVI FELICIANO said:
You can use the defalt method, dont need to change anything.
Click to expand...
Click to collapse
You mean I can just follow the way to root if my device would have been running 4.4.2 kitkat (and as suggested by deej_roamer in his post here: http://forum.xda-developers.com/showthread.php?t=2755336 )
Thank you.
SArnab©® said:
Who told you that you need root to move apps to sd card?
Once you insert sd card you will get an option in settings/apps to move apps to sd card for those that can be moved.
This is though limited to Apks only and data is still kept in internal sd card.
If this option is not enough for you then you can go the advanced wag by rooting and using gl2sd or link2sd like apps.
Click to expand...
Click to collapse
I know friend. I was talking about games like asphalt 8 and dead trigger which have data of size 1.5 gb because of which I wanted to root my phone. Thank you for the advice.
SArnab©® said:
Who told you that you need root to move apps to sd card?
Once you insert sd card you will get an option in settings/apps to move apps to sd card for those that can be moved.
This is though limited to Apks only and data is still kept in internal sd card.
If this option is not enough for you then you can go the advanced wag by rooting and using gl2sd or link2sd like apps.
Click to expand...
Click to collapse
You can install only one game due to it's low internal memory. By one game I mean high graphics game. The obb file remains in the internal storage even after moving to SD card. I tried many things like making SD card default storage using SDK tools but to no Vail. Guess the only way now is to root it & use apps like gl2sd
Sent from my XT1022 using XDA Free mobile app
5zan said:
You can install only one game due to it's low internal memory. By one game I mean high graphics game. The obb file remains in the internal storage even after moving to SD card. I tried many things like making SD card default storage using SDK tools but to no Vail. Guess the only way now is to root it & use apps like gl2sd
Sent from my XT1022 using XDA Free mobile app
Click to expand...
Click to collapse
If you read my post correctly then that's what I have written.
5zan said:
You can install only one gphone and due to it's low internal memory. By one game I mean high graphics game. The obb file remains in the internal storage even after moving to SD card. I tried many things like making SD card default storage using SDK tools but to no Vail. Guess the only way now is to root it & use apps like gl2sd
Sent from my XT1022 using XDA Free mobile app
Click to expand...
Click to collapse
I know friend. Thats why in this post I asked how to root the phone and not how to install games on sd card. Thanks.
Harsh862 said:
You mean I can just follow the way to root if my device would have been running 4.4.2 kitkat (and as suggested by deej_roamer in his post here: http://forum.xda-developers.com/showthread.php?t=2755336 )
Thank you.
Click to expand...
Click to collapse
Yes this method work with all 4.x roms i made it in my 4.4.4
(Sorry my bad english)
Sent from my XT1025 using Tapatalk
DAVI FELICIANO said:
Yes this method work with all 4.x roms i made it in my 4.4.4
(Sorry my bad english)
Sent from my XT1025 using Tapatalk
Click to expand...
Click to collapse
Ok. Thank you friend. I will reply if I face any problem. Thank you again.
Any idea of rooting the device without unlocking BL...thnx in advance
Sent from my XT1022 using XDA Premium 4 mobile app
Thank You everyone for your help. I now have succesfully rooted my phone. Thanks a lot. I owe you all.
Harsh862 said:
Thank You everyone for your help. I now have succesfully rooted my phone. Thanks a lot. I owe you all.
Click to expand...
Click to collapse
Hi. i am in the same boat as you were. i have a moto e dual sim version running on 4.4.4 out of the box. i have asked around also but havent found a solution.
i have successfully unlocked the bootloader but i have tried n number of times to flash recovery but unsuccessful.
it just doesnt flash, i have tried official and unofficial TWRP and even CWM but i just simply get the recovery to stick.
Could you please tell me how you successfully flash recovery .
thanks in advance!!
shamps said:
Hi. i am in the same boat as you were. i have a moto e dual sim version running on 4.4.4 out of the box. i have asked around also but havent found a solution.
i have successfully unlocked the bootloader but i have tried n number of times to flash recovery but unsuccessful.
it just doesnt flash, i have tried official and unofficial TWRP and even CWM but i just simply get the recovery to stick.
Could you please tell me how you successfully flash recovery .
thanks in advance!!
Click to expand...
Click to collapse
I followed the thread by deej_roamer here http://forum.xda-developers.com/showthread.php?t=2755336
Try out my steps:
[Your phone battery must be at least 75%]
1. First download "Fastboot" from the thread. (Click on the "mfastboot-v2" link in the thread)
2. Next install it in a folder and remember that folder. Also, make sure you select the option of "Create shortcut on Desktop" during installation.
3. Next download CWM recovery from this thread - http://forum.xda-developers.com/moto-e/general/root-moto-e-rooting-flashing-recovery-t2802971 (Click on the "CWM 6.0.4.9 recovery For MOTO E" link in the thread)
4. Copy the "cwm6.0.4.9_recover.img" file to the installation folder of fastboot.
5. Next download SuperSU v2.02 from here - http://download.chainfire.eu/452/SuperSU/UPDATE-SuperSU-v2.02.zip (Click on "UPDATE-SuperSU-v2.02.zip" link)
6. Don't Extract Supersu zip file.
7. Connect phone to pc. Copy the zip file to your internal memory(the directory of int. memory is /sdcard) (The directory for ext. sd card is /storage/sdcard1).
8. Remove your phone from your pc.
9. Switch off your device.
10. Turn on your device by holding power off button and volume down button together for 6-7 seconds. Quickly connect your phone to your pc.
11. The bootloader must be showing usb connected.
12. Run fastboot from your desktop.
13. Now type this (without quotes) - "fastboot flash recovery cwm6.0.4.9_recovery.img"
14. Look at the screen of device. It must be showing "Mismatched partition size (recovery)". It is normal don't worry.
15. Press volume down once (recovery will be selected) and then volume up so that it goes into recovery.
16. It will show the bootloader unlocked warning. Don't worry about it.
17. Your phone should now be in CWM recovery.
18. Don't do anything except what I tell you.
19. In this menu movement is done by the volume rockers ans selection by power button.
20. Press volume down so that "install zip" is selected.
21. Press power button.
22. Select "choose zip from /sdcard". Press power button.
23. Find the SuperSU.zip file(It will probably be in the "0/" folder)
24. It will ask to confirm install. Select Yes.
25. SuperSU will be installed.
26. Select CWM reboot. When you select CWM reboot, it will display "root access possibly lost - Fix?". PLEASE Select "No".
27. Your phone will now reboot. (The bootloader unlocked warning will be shown and then the boot animation).
28. Open your menu(in the phone) and find SuperSu app (a # symbol will be there in its icon).
29. Disconnect your device from the pc.
CONGRATULATIONS YOU HAVE A ROOTED MOTO E.
If you ever wish to flash any other recovery (like twrp),
1. Copy the file to the fastboot installation folder in your pc.
2. Then reboot your device into bootloader and quickly connect it to your pc.
3. Run fastboot from your desktop and then type the following without quotes: "fastboot flash recovery cwm6.0.4.9_recovery.img"
4. Instead of writing "cwm6.0.4.9_recovery.img" write the complete file name including extension. For eg. if file name is "twrp_recovery_2" and has extension ".img" then write "fastboot flash recovery twrp_recovery_2.img"
I hope that this solved your problem brother.
Urgent help needed
Harsh862 said:
I have a Motorola Moto E(XT1022). I bought it recently and just when I first started it, I got the 4.4.4 kitkat update and so I downloaded it right away. Then I realised one of the biggest problems of Moto E i.e. 2.2 gb storage. So i dug into find how to install apps on sd card and got to know that you have to root the phone. On xda, I found various ways to root but they were only for the 4.4.2 version of the phone and others were update to 4.4.4 on aldready rooted devices. Please tell me the way to root my device. Also as I am new to this, I dont understand any words like bootloader, fast recovery, etc. Please help me. Thank you in advance.
Edit: Can I use the way given by deej_roamer in his post here:http://forum.xda-developers.com/show....php?t=2755336
Edit: I am sorry to have posted this in the general section. I don't know how to move it now to the questions section. Sorry again.
Click to expand...
Click to collapse
after unlocking moto e....at the time of flashing it gives me error like
error: cannot load 'recovery.img': No error
I have followed every step as mentioned by xda.......i have android 4.4.4 update may be thats why it is not rooting.....
please anyone give me solution....i cant root my phone
please reply as early as possible
thanks
kishorr said:
after unlocking moto e....at the time of flashing it gives me error like
error: cannot load 'recovery.img': No error
I have followed every step as mentioned by xda.......i have android 4.4.4 update may be thats why it is not rooting.....
please anyone give me solution....i cant root my phone
please reply as early as possible
thanks
Click to expand...
Click to collapse
I followed the thread by deej_roamer here http://forum.xda-developers.com/showthread.php?t=2755336
Try out my steps:
[Your phone battery must be at least 75%]
1. First download "Fastboot" from the thread. (Click on the "mfastboot-v2" link in the thread)
2. Next install it in a folder and remember that folder. Also, make sure you select the option of "Create shortcut on Desktop" during installation.
3. Next download CWM recovery from this thread - http://forum.xda-developers.com/moto-e/general/root-moto-e-rooting-flashing-recovery-t2802971 (Click on the "CWM 6.0.4.9 recovery For MOTO E" link in the thread)
4. Copy the "cwm6.0.4.9_recover.img" file to the installation folder of fastboot.
5. Next download SuperSU v2.02 from here - http://download.chainfire.eu/452/SuperSU/UPDATE-SuperSU-v2.02.zip (Click on "UPDATE-SuperSU-v2.02.zip" link)
6. Don't Extract Supersu zip file.
7. Connect phone to pc. Copy the zip file to your internal memory(the directory of int. memory is /sdcard) (The directory for ext. sd card is /storage/sdcard1).
8. Remove your phone from your pc.
9. Switch off your device.
10. Turn on your device by holding power off button and volume down button together for 6-7 seconds. Quickly connect your phone to your pc.
11. The bootloader must be showing usb connected.
12. Run fastboot from your desktop.
13. Now type this (without quotes) - "fastboot flash recovery cwm6.0.4.9_recovery.img"
14. Look at the screen of device. It must be showing "Mismatched partition size (recovery)". It is normal don't worry.
15. Press volume down once (recovery will be selected) and then volume up so that it goes into recovery.
16. It will show the bootloader unlocked warning. Don't worry about it.
17. Your phone should now be in CWM recovery.
18. Don't do anything except what I tell you.
19. In this menu movement is done by the volume rockers ans selection by power button.
20. Press volume down so that "install zip" is selected.
21. Press power button.
22. Select "choose zip from /sdcard". Press power button.
23. Find the SuperSU.zip file(It will probably be in the "0/" folder)
24. It will ask to confirm install. Select Yes.
25. SuperSU will be installed.
26. Select CWM reboot. When you select CWM reboot, it will display "root access possibly lost - Fix?". PLEASE Select "No".
27. Your phone will now reboot. (The bootloader unlocked warning will be shown and then the boot animation).
28. Open your menu(in the phone) and find SuperSu app (a # symbol will be there in its icon).
29. Disconnect your device from the pc.
CONGRATULATIONS YOU HAVE A ROOTED MOTO E.
If you ever wish to flash any other recovery (like twrp),
1. Copy the file to the fastboot installation folder in your pc.
2. Then reboot your device into bootloader and quickly connect it to your pc.
3. Run fastboot from your desktop and then type the following without quotes: "fastboot flash recovery cwm6.0.4.9_recovery.img"
4. Instead of writing "cwm6.0.4.9_recovery.img" write the complete file name including extension. For eg. if file name is "twrp_recovery_2" and has extension ".img" then write "fastboot flash recovery twrp_recovery_2.img"
I hope that this solved your problem brother.
problem successfully resolved
Harsh862 said:
I followed the thread by deej_roamer here http://forum.xda-developers.com/showthread.php?t=2755336
Try out my steps:
[Your phone battery must be at least 75%]
1. First download "Fastboot" from the thread. (Click on the "mfastboot-v2" link in the thread)
2. Next install it in a folder and remember that folder. Also, make sure you select the option of "Create shortcut on Desktop" during installation.
3. Next download CWM recovery from this thread - http://forum.xda-developers.com/moto-e/general/root-moto-e-rooting-flashing-recovery-t2802971 (Click on the "CWM 6.0.4.9 recovery For MOTO E" link in the thread)
4. Copy the "cwm6.0.4.9_recover.img" file to the installation folder of fastboot.
5. Next download SuperSU v2.02 from here - http://download.chainfire.eu/452/SuperSU/UPDATE-SuperSU-v2.02.zip (Click on "UPDATE-SuperSU-v2.02.zip" link)
6. Don't Extract Supersu zip file.
7. Connect phone to pc. Copy the zip file to your internal memory(the directory of int. memory is /sdcard) (The directory for ext. sd card is /storage/sdcard1).
8. Remove your phone from your pc.
9. Switch off your device.
10. Turn on your device by holding power off button and volume down button together for 6-7 seconds. Quickly connect your phone to your pc.
11. The bootloader must be showing usb connected.
12. Run fastboot from your desktop.
13. Now type this (without quotes) - "fastboot flash recovery cwm6.0.4.9_recovery.img"
14. Look at the screen of device. It must be showing "Mismatched partition size (recovery)". It is normal don't worry.
15. Press volume down once (recovery will be selected) and then volume up so that it goes into recovery.
16. It will show the bootloader unlocked warning. Don't worry about it.
17. Your phone should now be in CWM recovery.
18. Don't do anything except what I tell you.
19. In this menu movement is done by the volume rockers ans selection by power button.
20. Press volume down so that "install zip" is selected.
21. Press power button.
22. Select "choose zip from /sdcard". Press power button.
23. Find the SuperSU.zip file(It will probably be in the "0/" folder)
24. It will ask to confirm install. Select Yes.
25. SuperSU will be installed.
26. Select CWM reboot. When you select CWM reboot, it will display "root access possibly lost - Fix?". PLEASE Select "No".
27. Your phone will now reboot. (The bootloader unlocked warning will be shown and then the boot animation).
28. Open your menu(in the phone) and find SuperSu app (a # symbol will be there in its icon).
29. Disconnect your device from the pc.
CONGRATULATIONS YOU HAVE A ROOTED MOTO E.
If you ever wish to flash any other recovery (like twrp),
1. Copy the file to the fastboot installation folder in your pc.
2. Then reboot your device into bootloader and quickly connect it to your pc.
3. Run fastboot from your desktop and then type the following without quotes: "fastboot flash recovery cwm6.0.4.9_recovery.img"
4. Instead of writing "cwm6.0.4.9_recovery.img" write the complete file name including extension. For eg. if file name is "twrp_recovery_2" and has extension ".img" then write "fastboot flash recovery twrp_recovery_2.img"
I hope that this solved your problem brother.
Click to expand...
Click to collapse
Thanks harsh862....it really helped a lot..,. Really thanks
shamps said:
Hi. i am in the same boat as you were. i have a moto e dual sim version running on 4.4.4 out of the box. i have asked around also but havent found a solution.
i have successfully unlocked the bootloader but i have tried n number of times to flash recovery but unsuccessful.
it just doesnt flash, i have tried official and unofficial TWRP and even CWM but i just simply get the recovery to stick.
Could you please tell me how you successfully flash recovery .
thanks in advance!!
Click to expand...
Click to collapse
kishorr said:
after unlocking moto e....at the time of flashing it gives me error like
error: cannot load 'recovery.img': No error
I have followed every step as mentioned by xda.......i have android 4.4.4 update may be thats why it is not rooting.....
please anyone give me solution....i cant root my phone
please reply as early as possible
thanks
Click to expand...
Click to collapse
Is your recovery.img placed in the "C:\Program Files (x86)\Minimal ADB and Fastboot"?
It need to placed in it or you'll get an error.
Boot loader is LOCKED !! cannot be unlocked !! so no root for me ?

Categories

Resources