using file-philz_touch_5.15.0 n7100.tar.md5(Galaxy Note 2) installed via Odin and my S3 stopped working the touch screen
sorry if the topic is in the wrong place, just please do not remove without at least help me(sorry for the bad english I'm using google translator)
alifizee said:
using file-philz_touch_5.15.0 n7100.tar.md5(Galaxy Note 2) installed via Odin and my S3 stopped working the touch screen
sorry if the topic is in the wrong place, just please do not remove without at least help me(sorry for the bad english I'm using google translator)
Click to expand...
Click to collapse
Note2 kernel will destroy the touch screen of an SG3, sorry but you need a repair to fit a new screen.
boomboomer said:
Note2 kernel will destroy the touch screen of an SG3, sorry but you need a repair to fit a new screen.
Click to expand...
Click to collapse
sorry to hear..been there, done that.
I hope you've got warranty.
Technically its not covered by warranty
-----------------------
Sent via tapatalk.
I do NOT reply to support queries over PM. Please keep support queries to the Q&A section, so that others may benefit
rootSU said:
Technically its not covered by warranty
-----------------------
Sent via tapatalk.
I do NOT reply to support queries over PM. Please keep support queries to the Q&A section, so that others may benefit
Click to expand...
Click to collapse
Technically not. Mine was , just restored efs manually, put back original software etc.
Got whole new screen
the only solution will be to replace the touch?
alifizee said:
the only solution will be to replace the touch?
Click to expand...
Click to collapse
As said just hand it to service say screen stopped and hope they accept as warranty if not you pay .
JJEgan said:
As said just hand it to service say screen stopped and hope they accept as warranty if not you pay .
Click to expand...
Click to collapse
First get an usb otg cable, connect the mouse to it, put everything back to stock, so everything in download mode says : samsung official and counter = 0.
alifizee said:
using file-philz_touch_5.15.0 n7100.tar.md5(Galaxy Note 2) installed via Odin and my S3 stopped working the touch screen
sorry if the topic is in the wrong place, just please do not remove without at least help me(sorry for the bad english I'm using google translator)
Click to expand...
Click to collapse
I may be wrong, but if you made a nandroid backup of your device, you might be able to restore it using that. Ive never messed up my device before so, like i said, i may be wrong.
tomosh22 said:
I may be wrong
Click to expand...
Click to collapse
Yes. Nandroid backups cannot restore fried hardware.
-----------------------
Sent via tapatalk.
I do NOT reply to support queries over PM. Please keep support queries to the Q&A section, so that others may benefit
s3 touch stopped working
alifizee said:
using file-philz_touch_5.15.0 n7100.tar.md5(Galaxy Note 2) installed via Odin and my S3 stopped working the touch screen
sorry if the topic is in the wrong place, just please do not remove without at least help me(sorry for the bad english I'm using google translator)
Click to expand...
Click to collapse
The same problem happened to my galxy s3 as well... some body help please...
Xaver Tooth said:
The same problem happened to my galxy s3 as well... some body help please...
Click to expand...
Click to collapse
If you read the whole thread instead of just quoting the first one you will get your answer. Honestly its only about 8 post and will take you all of 5 minutes.
Darke5tShad0w said:
If you read the whole thread instead of just quoting the first one you will get your answer. Honestly its only about 8 post and will take you all of 5 minutes.
Click to expand...
Click to collapse
Thank u but i did read the post many times. but though some one might as well know some thing abt the problem.
i've read more then needed. since it was not a hardware damage, i wwas expecting a genuine response rather then just a mock over the post i made.
The response was genuine, giving you the correct answer -you won't find a different one. If you flashed a Note kernel then your hardware is damaged and needs a new screen assembly.
100% solution
after root i9300 with wrong cft auto root.. touch doest work.. and i replace this chipset.. and my problem solve.. find this chipset from broken lcd.. good luck
Related
Hello,
After rooting my phone I wanted to go to the recovery menu to delete all data on the phone.
So I shut down the phone and used the buttons to go the the recovery menu, when the screen appears it was there for 0,5 seconds and then I saw some text (Don't know what it was). I was not able to do anything so I decided to pull out the battery.
After waiting a while I wanted to turn the phone back on but it didn't do anything.
No led, no screen nothing, no communication with the computer.
Battery was 100% loaded.
How can this happend?
Is there something that I can do?
Thankss
No details posted crystal ball cannot see what model phone what firmware or what root method .Do you know ???
Usual is user error failing to read the instructions .
jje
JJEgan said:
No details posted crystal ball cannot see what model phone what firmware or what root method .Do you know ???
Usual is user error failing to read the instructions .
jje
Click to expand...
Click to collapse
Hi,
I used gs3.wonderhowto.com/how-to/root-your-samsung-galaxy-s3-and-flash-stock-roms-using-odin-for-windows-0142713/
Model I9300.
Thats all I know..
Put your battery in. Plug the usb cable in. If no led comes on at this stage, you need a new motherboard
-----------------------
Sent via tapatalk.
I do NOT reply to support queries over PM. Please keep support queries to the Q&A section, so that others may benefit
Nicasius said:
Hi,
I used gs3.wonderhowto.com/how-to/root-your-samsung-galaxy-s3-and-flash-stock-roms-using-odin-for-windows-0142713/
Model I9300.
Thats all I know..
Click to expand...
Click to collapse
Nothing to do with this forum why don't you ask the forum that gave you this method that has bricked your phone .
Suggest you flash with Philz recovery from Android Original Development .
That fails then flash your stock rom via Odin and try again .
Basics read first.
http://forum.xda-developers.com/showthread.php?t=2344125
Critical you read the first two posts .
rootSU said:
Put your battery in. Plug the usb cable in. If no led comes on at this stage, you need a new motherboard
-----------------------
Sent via tapatalk.
I do NOT reply to support queries over PM. Please keep support queries to the Q&A section, so that others may benefit
Click to expand...
Click to collapse
Nope,
No Led, nothing.
JJEgan said:
Nothing to do with this forum why don't you ask the forum that gave you this method that has bricked your phone .
Suggest you flash with Philz recovery from Android Original Development .
That fails then flash your stock rom via Odin and try again .
Basics read first.
http://forum.xda-developers.com/showthread.php?t=2344125
Critical you read the first two posts .
Click to expand...
Click to collapse
Thanks for the information, i'm going to read the threads.
They're not really going to help you now. Your phone exhibits the symptoms of full sds.
Send it for repair if you still have warranty.
-----------------------
Sent via tapatalk.
I do NOT reply to support queries over PM. Please keep support queries to the Q&A section, so that others may benefit
rootSU said:
They're not really going to help you now. Your phone exhibits the symptoms of full sds.
Send it for repair if you still have warranty.
-----------------------
Sent via tapatalk.
I do NOT reply to support queries over PM. Please keep support queries to the Q&A section, so that others may benefit
Click to expand...
Click to collapse
Yeah I know but in the future.
Is it by my fault that the phone is broken ?
That I do something wrong or is the software corrupted?
Nicasius said:
Yeah I know but in the future.
Is it by my fault that the phone is broken ?
That I do something wrong or is the software corrupted?
Click to expand...
Click to collapse
Ultimately its samsungs fault for having faulty firmware on the emmc, but it certainly could have been partially your fault for taking a patched device and flashing it with an unpatched component. Without knowing exactly what you flashed/ recovery version etc its hard to say
-----------------------
Sent via tapatalk.
I do NOT reply to support queries over PM. Please keep support queries to the Q&A section, so that others may benefit
Nicasius said:
Yeah I know but in the future.
Is it by my fault that the phone is broken ?
That I do something wrong or is the software corrupted?
Click to expand...
Click to collapse
When you flash stuff from a forum that has just copied bits and pieces its hard to know what went wrong .
However best response is to tell Samsung that it failed to boot one morning and you have read on the web about the emmc problem .
I have my phone back so now i'm going to try to root it again.
It's kernelversion 3.0.31 - 1314436
I'm going to use the XDA manual and rom: http://forum.xda-developers.com/showthread.php?t=2407407
Is this a good kernelversion? Not that my phone will fail again.
Thanks!
// EDIT:
Succesfully rooted / flashed my Phone .
Hello, so this is what happened i saw a rom From http://forum.xda-developers.com/show....php?t=2154790
After that i got to 80% then it failed on Odin now i'm stuck on a (soft brick) Odin Mode
My phone info
Samsung note 1 (SHV-E160L) Korean version
Any Help guides is help full By the way is this fixable?? i hope its not bricked i only got it 5~6 weeks ago
i also got a video on youtube with my problem Please help!
www *dot* youtube *dot* com/watch?v=JWr67N122r8&feature=youtu.be
Adam1337 said:
Hello, so this is what happened i saw a rom From http://forum.xda-developers.com/show....php?t=2154790
After that i got to 80% then it failed on Odin now i'm stuck on a (soft brick) Odin Mode
My phone info
Samsung note 1 (SHV-E160L) Korean version
Any Help guides is help full By the way is this fixable?? i hope its not bricked i only got it 5~6 weeks ago
i also got a video on youtube with my problem Please help!
www *dot* youtube *dot* com/watch?v=JWr67N122r8&feature=youtu.be
Click to expand...
Click to collapse
you have posted the same thread twice, I don't think that is going to change anything. most likely a moderator will eliminate one of them. you had 231 views and only 2 people attempt to help.
did you try my suggestion of posting in the sub forum in the general area? I really think you have a better chance of a response there. as I said in your other thread, I read of others who had similar problems. cant do it for you, you have to help yourself first. I understand your frustrated, but a second post in same area will not fix your problem.
the sub forum is for your device specifically.
captemo said:
you have posted the same thread twice, I don't think that is going to change anything. most likely a moderator will eliminate one of them. you had 231 views and only 2 people attempt to help.
did you try my suggestion of posting in the sub forum in the general area? I really think you have a better chance of a response there. as I said in your other thread, I read of others who had similar problems. cant do it for you, you have to help yourself first. I understand your frustrated, but a second post in same area will not fix your problem.
the sub forum is for your device specifically.
Click to expand...
Click to collapse
OHH I see what u mean sorry
Adam1337 said:
OHH I see what u mean sorry
Click to expand...
Click to collapse
no need to apologize, just trying to help.
actually, I just looked over in GENERAL forums again and noticed there are at least 3 threads over there for Korean device users. 2 of those threads have 100,000 or more viewers. I would say that's where your help is going to be.
hope I have helped
The phone is ok for now. Re download the rom and try again.
rangercaptain said:
The phone is ok for now. Re download the rom and try again.
Click to expand...
Click to collapse
ok i'll try some more roms see if they will work
rangercaptain said:
The phone is ok for now. Re download the rom and try again.
Click to expand...
Click to collapse
you were one of the folks I was hoping would chime in and try an help this guy Ranger
Adam1337 said:
ok i'll try some more roms see if they will work
Click to expand...
Click to collapse
I think he is suggesting you try and re download the same rom again.
captemo said:
I think he is suggesting you try and re download the same rom again.
Click to expand...
Click to collapse
Tried didn't work
Ok a friend S3 started acting up I didn't back up so I lost anything
When I tried to put back the original firmware on the phone using Odin for no reason at all will it be installed. It will just stick on Nand writing in the bottom part of the screen and nothing on tp part of the screen that would usually show FIL, PASS etc.
Next thing with some other firmwares the blue loading bar on the phone will go to basically 100% but nothing will happen on the phone
I did get on 2 firmwares, one just kept booting to the Samsung logo then go in a revolving boot sequence with the animation coming up, the other firmware I got on seems like it belonged to some other phone company and after their boot screen comes up and the Samsung's logo come on the screen it will just stay there.
In both cases the phone was left after installation on both screens for hours with no success.
All I want to do is put back on the 4.12 JB T mobile version enter unlock code and give back to my friend
Can I get some assistance please thanks
positiveg said:
Ok a friend S3 started acting up I didn't back up so I lost anything
When I tried to put back the original firmware on the phone using Odin for no reason at all will it be installed. It will just stick on Nand writing in the bottom part of the screen and nothing on tp part of the screen that would usually show FIL, PASS etc.
Next thing with some other firmwares the blue loading bar on the phone will go to basically 100% but nothing will happen on the phone
I did get on 2 firmwares, one just kept booting to the Samsung logo then go in a revolving boot sequence with the animation coming up, the other firmware I got on seems like it belonged to some other phone company and after their boot screen comes up and the Samsung's logo come on the screen it will just stay there.
In both cases the phone was left after installation on both screens for hours with no success.
All I want to do is put back on the 4.12 JB T mobile version enter unlock code and give back to my friend
Can I get some assistance please thanks
Click to expand...
Click to collapse
Take out the battery and post the model number here.
Factory reset to get past the forever spinning Samsung logo. The Odin fails are probably due to incorrect firmware.
GT-I9300
I've been trying to get a firmware for that. And how do i get it to the point of factory reset option?
thanks
G
Aerowinder said:
Take out the battery and post the model number here.
Factory reset to get past the forever spinning Samsung logo. The Odin fails are probably due to incorrect firmware.
Click to expand...
Click to collapse
positiveg said:
GT-I9300
I've been trying to get a firmware for that. And how do i get it to the point of factory reset option?
thanks
G
Click to expand...
Click to collapse
Direct all future questions here: http://forum.xda-developers.com/forumdisplay.php?f=1563
You factory reset by entering recovery and choosing that option.
Thanks got it factory reset and it started
Was some firmware not in English but was able to change language to English so it's good will root and should be on my merry way
thanks again
Sorry if I put thread in wrong area as well
G
:good:
Aerowinder said:
Direct all future questions here: http://forum.xda-developers.com/forumdisplay.php?f=1563
You factory reset by entering recovery and choosing that option.
Click to expand...
Click to collapse
Hi guess what i wa trying to put on a ROM, and for some reason it's messing up. I backed up the phone before I did it and I can't find the back up
So I'm like ok let me try and put back on the firmware, but i downloaded so many firmware looking for one to try I've been unable to find the correct one. So can you point me where I can get a firmware for my galaxy I9300 please
thanks
G
Aerowinder said:
Direct all future questions here: http://forum.xda-developers.com/forumdisplay.php?f=1563
You factory reset by entering recovery and choosing that option.
Click to expand...
Click to collapse
positiveg said:
Hi guess what i wa trying to put on a ROM, and for some reason it's messing up. I backed up the phone before I did it and I can't find the back up
So I'm like ok let me try and put back on the firmware, but i downloaded so many firmware looking for one to try I've been unable to find the correct one. So can you point me where I can get a firmware for my galaxy I9300 please
thanks
G
Click to expand...
Click to collapse
http://forum.xda-developers.com/forumdisplay.php?f=1563
Tired looking thru this place.
Aerowinder said:
http://forum.xda-developers.com/forumdisplay.php?f=1563
Click to expand...
Click to collapse
positiveg said:
Tired looking thru this place.
Click to expand...
Click to collapse
You should stick to that forum before someone doesn't read this thread and answers with a link to our firmware which will brick your device.
It should be in there somewhere. Did you read the stickies? Like aerowinder said, all tour future questions need to be posted in that forum. We know very little about your device here.
You can find all samsung firmware at samsung-updates.com
Sent from my SGH-T999V using Tapatalk 4
I didn't fing anything in that forum
no prob cool
thx
DocHoliday77 said:
You should stick to that forum before someone doesn't read this thread and answers with a link to our firmware which will brick your device.
It should be in there somewhere. Did you read the stickies? Like aerowinder said, all tour future questions need to be posted in that forum. We know very little about your device here.
You can find all samsung firmware at samsung-updates.com
Sent from my SGH-T999V using Tapatalk 4
Click to expand...
Click to collapse
positiveg said:
I didn't fing anything in that forum
no prob cool
thx
Click to expand...
Click to collapse
Well that forum is specifically for your device. Use what you find in this forum and youre destined for a brick.
If you were to ask this question there you would get answers from people who are familiar with the device you have. Ours is very different.
Sent from my SGH-T999V using Tapatalk 4
I'm sorry hey but this was moves to the correct forum
Seems as well that Odin 3.4/3.6/3.6. All seem to have a problem I installed a firmware using 1.85 and it went on find.
Ok thanks got you, have a good one. so the devices are soo similar still very different?
DocHoliday77 said:
Well that forum is specifically for your device. Use what you find in this forum and youre destined for a brick.
If you were to ask this question there you would get answers from people who are familiar with the device you have. Ours is very different.
Sent from my SGH-T999V using Tapatalk 4
Click to expand...
Click to collapse
positiveg said:
Ok thanks got you, have a good one. so the devices are soo similar still very different?
Click to expand...
Click to collapse
Hardware wise, they aren't similar at all.
positiveg said:
GT-I9300
I've been trying to get a firmware for that. And how do i get it to the point of factory reset option?
thanks
G
Click to expand...
Click to collapse
According to this you are working on an International i9300 S3 I will move your thread to the correct forum as to not confuse other users here, or have someone here give you the wrong links to software that may brick your device.
Thread moved.
The op can post what the problem is here please if its an I9300 .
I9300 Basics read first.
http://forum.xda-developers.com/showthread.php?t=2344125
Critical you read the first two posts .
Hi all.
i am a n00b so please forgive me if i am doing this incorrectly..
i flashed CWM recovery touch to my GT-I9300 and the touchscreen stopped working.
i have read numerous posts about how if the touchscreen stops working, the digitizer is broken and needs replacing.. i am 90 percent sure that the software is somehow out of whack..
so, my question is...
Is it possible to reflash the drivers or software that the digitizer/touchscreen needs to work with ODIN or another way? If so, how would i do it?
i am currently using a USB adapter and a USB mouse to navigate my phone.
What phone what firmware what cwm details are missing
JJEgan said:
What phone what firmware what cwm details are missing
Click to expand...
Click to collapse
Recently flashed note2 kernel and the digitizer chip was burned (broken).
If you do a reinstall, stock or whatever and still find the touchscreen isn't working then you probably did the same.
JJEgan said:
What phone what firmware what cwm details are missing
Click to expand...
Click to collapse
galaxy s3.
not sure on the firmware as i was flashing all kinds of stock roms as i was trying to fix another issue (EFS / IMEI wiped).
and i cant remember the version of CWM.
If the digitser doesn't work in recovery AND android, its hardware not software because recovery and Android do not share "software" and by that I mean kernel and drivers.
-----------------------
Sent via tapatalk.
I do NOT reply to support queries over PM. Please keep support queries to the Q&A section, so that others may benefit
bender_007 said:
Recently flashed note2 kernel and the digitizer chip was burned (broken).
If you do a reinstall, stock or whatever and still find the touchscreen isn't working then you probably did the same.
Click to expand...
Click to collapse
but you wouldnt think that flashing CWMR would "Burn" the digitizer. which makes me think its a software issue
rootSU said:
If the digitser doesn't work in recovery AND android, its hardware not software because recovery and Android do not share "software" and by that I mean kernel and drivers.
-----------------------
Sent via tapatalk.
I do NOT reply to support queries over PM. Please keep support queries to the Q&A section, so that others may benefit
Click to expand...
Click to collapse
so if i wanted to check to see if it is a software issue, where would i get drivers from?
If you flashed say, the note 2 cwm like many people do by mistake then its definitely hardware.
If you have cwm touch / philz touch for the s3 and touch doesn't work and also touch doesn't work in android then its also 100% hardware.
Any drivers recovery uses are not used in the android ROM itself. You have 2 sets of drivers. If you flashed cwm and touchscreen was broken by driver / software issue, touchscreen will still work in android.
Simple and easy Test to do
-----------------------
Sent via tapatalk.
I do NOT reply to support queries over PM. Please keep support queries to the Q&A section, so that others may benefit
Are the "menu" and "back" buttons part of the touchscreen? Because they still work
BallaratBloke81 said:
Are the "menu" and "back" buttons part of the touchscreen?
Click to expand...
Click to collapse
Nope. Completely separate and not indicative of anything.
-----------------------
Sent via tapatalk.
I do NOT reply to support queries over PM. Please keep support queries to the Q&A section, so that others may benefit
Hi all. I've a Samsung Galaxy S3 I9300.
So, i can root my phone but i dont understand, when i make root my phone, some programs broken after the installation root.
I've try too many time to re-flash stock rom, custom rom to my phone but its not change.
Any idea? Where is the problem?
Post lacks information
JJEgan said:
Post lacks information
Click to expand...
Click to collapse
Thanks for you reply @JJEgan
Sorry, how can i send lacks information? By the way where is this in the menu?
Sorry for my bad English.
Go and read the sticky thread in general forum, information and guides on how to return your phone to stock.
We can't help if you don't describe what the problems are.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
Go and read the sticky thread in general forum, information and guides on how to return your phone to stock.
We can't help if you don't describe what the problems are.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Thanks for your replay @boomboomer
I can return stock rom, it's not problem for me, just my problem when i make root my phone some program not work normally. It's a my web application, i can see my phone information, where is it, how is the battery life etc.
So, its work for me about 2 week ago but now, not work. I've setup new rom after return stock rom again and make root than my programs not work anymore again. But when i make unroot program work again fine.
My program looks like log program.
deepfear said:
Thanks for you reply @JJEgan
Sorry, how can i send lacks information? By the way where is this in the menu?
Sorry for my bad English.
Click to expand...
Click to collapse
No information on firmware root used or problematic apps .