Wireless Charging Question... - Galaxy Note 3 Accessories

I have the Samsung OEM Wireless charging pad and a QI receiver pad set up...
With my S3, I was able to charge through an Otterbox case. With the Note 3 and a UAG case, it isn't able to charge without connecting/disconnecting. Is this an issue with the receiver or would a new charging pad make a difference? I was already looking at the LuguLake...
Thanks for any suggestions!

TrainerJulieC said:
I have the Samsung OEM Wireless charging pad and a QI receiver pad set up...
With my S3, I was able to charge through an Otterbox case. With the Note 3 and a UAG case, it isn't able to charge without connecting/disconnecting. Is this an issue with the receiver or would a new charging pad make a difference? I was already looking at the LuguLake...
Thanks for any suggestions!
Click to expand...
Click to collapse
Try to take out some adhesives from the qi receiver in specific the ones that facing the backplate and try again. I don't have the original pad but 2 cheapo eBay ones and 3 receivers and all combinations work fine with any case including Spigen or a leather fat portfolio that I have.
Sent from my SM-N9005 using Tapatalk

BlueChris said:
Try to take out some adhesives from the qi receiver in specific the ones that facing the backplate and try again. I don't have the original pad but 2 cheapo eBay ones and 3 receivers and all combinations work fine with any case including Spigen or a leather fat portfolio that I have.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
maybe the charging current is not enough for note 3 if you have installed them at right position.
i think that the charging current of note 3 need to be bigger than s 3.

Can someone else comment on this? I'd like to snatch up the Samsung wireless charging kit, but I use a Spigen case. Has anyone had any luck using the official charging kit with an aftermarket case? Thanks.

Have you tried it without the UAG case?

Related

Wireless Charging for Note 3?

Hey guys,
I am new to wireless charging and one of my colleague talks highly positive of the concept. Specially when at night, how easy it is to pick up the phone from the charging pad, surf for a while and put it back without the hassle of looking for the wire and plugging into the ports.
I have a note 3.. and planning to go for a sgp neo hybrid case.. will i be able to make use of the charging pad along with the neo hybrid case. I do understand that a custom case cover is needed for using the wireless charging kit.. which is provided by samsung for S4. but i think they still havent come up for N3.
Anyhow i've seen on various youtube videos that many a times third party cases also work with wirelss charging without the mod/hack. Anyone tried neo hybrid for n3 with their charging pads?
I have tested this with 3 different cases except the Spigen because I haven't received it yet but I don't think that this case will be the exception
Sent from my SM-N9005 using Tapatalk
BlueChris said:
I have tested this with 3 different cases except the Spigen because I haven't received it yet but I don't think that this case will be the exception
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Thanks for your reply, but what was the outcome? were u able to charge with the third party cases? Are the charging times same.. slower or faster.
With Samsung charging kit that includes the back cover and the pad, they claim that the charging is faster than conventional charging cos it charges at 600MAh's.
M8 QI has sensor at least my pad has so if it beeps and light goes green in pad no matter if I have the phone naked or in a case it charges with 640ma this charge my phone in 4 to 5 hours which occurs every night and I am fine. Imagine that I had put a plastic cap in bottom of phone to have the usb3 plug clean from dust.
Sent from my SM-N9005 using Tapatalk
Wireless Chargeing
MANswers said:
Hey guys,
I am new to wireless charging and one of my colleague talks highly positive of the concept. Specially when at night, how easy it is to pick up the phone from the charging pad, surf for a while and put it back without the hassle of looking for the wire and plugging into the ports.
I have a note 3.. and planning to go for a sgp neo hybrid case.. will i be able to make use of the charging pad along with the neo hybrid case. I do understand that a custom case cover is needed for using the wireless charging kit.. which is provided by samsung for S4. but i think they still havent come up for N3.
Anyhow i've seen on various youtube videos that many a times third party cases also work with wirelss charging without the mod/hack. Anyone tried neo hybrid for n3 with their charging pads?
Click to expand...
Click to collapse
T-Mobile has a wireless charging stand for sale for the N3. Its 69.99 and apply fallfun co to get 30% off. It doesnt say a back cover is needed. All thaats included is the stand cable and AC plug. I just ordered one so I will post results.
BlueChris said:
M8 QI has sensor at least my pad has so if it beeps and light goes green in pad no matter if I have the phone naked or in a case it charges with 640ma this charge my phone in 4 to 5 hours which occurs every night and I am fine. Imagine that I had put a plastic cap in bottom of phone to have the usb3 plug clean from dust.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Plugging off the port is a good idea.. thanks for your response.. i will start reviewing good wireless chargers now including the one you mentioned and the one jerry mentions below.
jerryjans11 said:
T-Mobile has a wireless charging stand for sale for the N3. Its 69.99 and apply fallfun co to get 30% off. It doesnt say a back cover is needed. All thaats included is the stand cable and AC plug. I just ordered one so I will post results.
Click to expand...
Click to collapse
Jerry thanks for your response and your the discount code. i will start reading the pros and cons of the charger.
Can you try to upload some pictures etc.. i like the 45 degree slant.. its like a dock.. that charges wirelessly.. instead of placing on a pad. Good stuff.
Pls try to put some reviews. If you can today i will place the order tonight.
The 45 degree needs inside the back cover I think 4 metal things and the base has magnets and that's how it stands. I have this http://pages.ebay.com/link/?nav=item.view&id=360732881624&globalID=EBAY-AU and is working fine, I had post a video also in the 1st wireless thread here https://www.youtube.com/watch?v=9LaQQnc2dmU&feature=youtube_gdata_player that I demonstrate it
Sent from my SM-N9005 using Tapatalk
jerryjans11 said:
T-Mobile has a wireless charging stand for sale for the N3. Its 69.99 and apply fallfun co to get 30% off. It doesnt say a back cover is needed. All thaats included is the stand cable and AC plug. I just ordered one so I will post results.
Click to expand...
Click to collapse
That's just your standard Qi charging pad. Won't work with your N3 unless you have the 'official' Samsung charging back plate, or you modify a receiver between your stock back plate, and battery.
In my experience,
With the samsung charging back plate, none of the standard N3 cases will fit on the phone anymore. It's because the back plate is thicker than the stock one.
With a receiver installed between the stock back plate and battery, it will bulge out. I don't like that either.
jerryjans11 said:
T-Mobile has a wireless charging stand for sale for the N3. Its 69.99 and apply fallfun co to get 30% off. It doesnt say a back cover is needed. All thaats included is the stand cable and AC plug. I just ordered one so I will post results.
Click to expand...
Click to collapse
Another thing, the charger is a 1Amp charger, i believe for the N3 you need atleast 2Amp.
skyline23 said:
That's just your standard Qi charging pad. Won't work with your N3 unless you have the 'official' Samsung charging back plate, or you modify a receiver between your stock back plate, and battery.
In my experience,
With the samsung charging back plate, none of the standard N3 cases will fit on the phone anymore. It's because the back plate is thicker than the stock one.
With a receiver installed between the stock back plate and battery, it will bulge out. I don't like that either.
Click to expand...
Click to collapse
I am not sure if the N3 and S4 use the same charging technology, cos in this video below the guy is charging a S4 on the TYLT
http://www.youtube.com/watch?v=K5g2rVraB1g
The thing i like about tylt is that it has three coils for charging unlike one for others, where u dont have to find the sweet spot... and lay your phone to pickup the right spot for charging.. demo on this video
http://www.youtube.com/watch?v=hF3yFvMXKZw
MANswers said:
I am not sure if the N3 and S4 use the same charging technology, cos in this video below the guy is charging a S4 on the TYLT
http://www.youtube.com/watch?v=K5g2rVraB1g
The thing i like about tylt is that it has three coils for charging unlike one for others, where u dont have to find the sweet spot... and lay your phone to pickup the right spot for charging.. demo on this video
http://www.youtube.com/watch?v=hF3yFvMXKZw
Click to expand...
Click to collapse
What I was trying to clarify, that even if you bought that charging stand, you'll need the wireless receiver on the phone itself.
That didn't seem clear to everyone on this thread.
skyline23 said:
What I was trying to clarify, that even if you bought that charging stand, you'll need the wireless receiver on the phone itself.
That didn't seem clear to everyone on this thread.
Click to expand...
Click to collapse
I still didnt get that mate.
T-Mobile's site mentions that this charger is compatible with Note 3
http://www.t-mobile.com/accessories/tylt-wireless-charger-black.html#features
And it doesnt mention about any charging receiver based cover
Code:
Compatible Devices
Galaxy Note 3 - Black
Galaxy S® 4 - Black Mist - 16GB
Lumia 810
Lumia 925
Nexus 4 - No Annual Contract
Galaxy Note 3 - White
Galaxy S® 4 - White Frost - 16GB
Lumia 810 - Refurbished
Nexus 4
Nexus 4 - White
MANswers said:
I still didnt get that mate.
T-Mobile's site mentions that this charger is compatible with Note 3
http://www.t-mobile.com/accessories/tylt-wireless-charger-black.html#features
And it doesnt mention about any charging receiver based cover
Code:
Compatible Devices
Galaxy Note 3 - Black
Galaxy S® 4 - Black Mist - 16GB
Lumia 810
Lumia 925
Nexus 4 - No Annual Contract
Galaxy Note 3 - White
Galaxy S® 4 - White Frost - 16GB
Lumia 810 - Refurbished
Nexus 4
Nexus 4 - White
Click to expand...
Click to collapse
That's only if you have the official Samsung charging back installed.
See this link;
http://www.mobilefun.com/40793-official-samsung-galaxy-note-3-wireless-charging-cover---black.htm
The Note 3 does not support wireless charging unless you buy that back, or a receiver that goes between the battery and stock back plate.
http://www.amazon.com/Standard-Wire...40793&sr=8-4&keywords=note+3+wireless+charger
skyline23 said:
That's only if you have the official Samsung charging back installed.
See this link;
http://www.mobilefun.com/40793-official-samsung-galaxy-note-3-wireless-charging-cover---black.htm
The Note 3 does not support wireless charging unless you buy that back, or a receiver that goes between the battery and stock back plate.
http://www.amazon.com/Standard-Wire...40793&sr=8-4&keywords=note+3+wireless+charger
Click to expand...
Click to collapse
Thanks for all the links.
I guess i understand about the receiver now. Just read the whole wireless charging thread on this section.
This is totally new to me, hence the confusion... the back cover you mentioned.. does it add bulk to the phone.. as in thickness?
Is there a way a single coil or some chip can be added to the current phone cover. I have verizon model.
MANswers said:
Thanks for all the links.
I guess i understand about the receiver now. Just read the whole wireless charging thread on this section.
This is totally new to me, hence the confusion... the back cover you mentioned.. does it add bulk to the phone.. as in thickness?
Is there a way a single coil or some chip can be added to the current phone cover. I have verizon model.
Click to expand...
Click to collapse
Yes, the samsung wireless charging cover is thicker. Will add 2mm, therefore, all your cases won't fit. Including the Neo Hybrid.
You can get receiver that goes between the battery and cover, but from my experience, it makes the rear cover bulge a bit.
MANswers said:
Hey guys,
I am new to wireless charging and one of my colleague talks highly positive of the concept. Specially when at night, how easy it is to pick up the phone from the charging pad, surf for a while and put it back without the hassle of looking for the wire and plugging into the ports.
I have a note 3.. and planning to go for a sgp neo hybrid case.. will i be able to make use of the charging pad along with the neo hybrid case. I do understand that a custom case cover is needed for using the wireless charging kit.. which is provided by samsung for S4. but i think they still havent come up for N3.
Anyhow i've seen on various youtube videos that many a times third party cases also work with wirelss charging without the mod/hack. Anyone tried neo hybrid for n3 with their charging pads?
Click to expand...
Click to collapse
1) Samsung has a wireless charging back (wireless receiver built-in) that replaces the battery cover/back already on the phone.
It makes the phone too thick for a case (a bumper might work).
2) They also make a S-view flip cover that replaces the stock back and has the wireless receiver built-in, no additional case needed.
3) Aftermarket Qi receivers can be purchased on Amazon and eBay that are placed inside the stock back cover, and if they don't cause a significant bulge in the back you can use a normal case, but one with a TPU or silicone back is most likely to work.
4) If you have a Qi receiver from a Note 2 (or similar) you can modify it to work inside the stock back cover.
ALL of those methods will require a Qi transmitter, or charging pad.
At least one seller on Amazon is offering a kit with both the Qi insert & charging pad, about $30 when I last looked.
Sent from my Nexus 10 using xda app-developers app
skyline23 said:
Yes, the samsung wireless charging cover is thicker. Will add 2mm, therefore, all your cases won't fit. Including the Neo Hybrid.
You can get receiver that goes between the battery and cover, but from my experience, it makes the rear cover bulge a bit.
Click to expand...
Click to collapse
One the posts mentioned in the wireless charging thread..
http://detail.tmall.com/item.htm?sp...289ff7c5f8bb4fe28bbdb230a58&scene=taobao_shop
and
http://dx-box.com/qi-wireless-charg...msung-galaxy-note-iii-3-n900-n9005-n9000.html
Looks like these recievers can be easily inserted into the back cover.. anyone tried it yet? or whats your opinion about this?
Adding the official samsung back cover with 2mm is not a big issue, but i dont wan to loose the phone protection without a neo hybrid.
gnik luap said:
1) Samsung has a wireless charging back (wireless receiver built-in) that replaces the battery cover/back already on the phone.
It makes the phone too thick for a case (a bumper might work).
2) They also make a S-view flip cover that replaces the stock back and has the wireless receiver built-in, no additional case needed.
3) Aftermarket Qi receivers can be purchased on Amazon and eBay that are placed inside the stock back cover, and if they don't cause a significant bulge in the back you can use a normal case, but one with a TPU or silicone back is most likely to work.
4) If you have a Qi receiver from a Note 2 (or similar) you can modify it to work inside the stock back cover.
ALL of those methods will require a Qi transmitter, or charging pad.
At least one seller on Amazon is offering a kit with both the Qi insert & charging pad, about $30 when I last looked.
Sent from my Nexus 10 using xda app-developers app
Click to expand...
Click to collapse
Thanks that is great information. Can you post the amazon link?
BlueChris said:
The 45 degree needs inside the back cover I think 4 metal things and the base has magnets and that's how it stands. I have this http://pages.ebay.com/link/?nav=item.view&id=360732881624&globalID=EBAY-AU and is working fine, I had post a video also in the 1st wireless thread here https://www.youtube.com/watch?v=9LaQQnc2dmU&feature=youtube_gdata_player that I demonstrate it
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
I was looking at the video again, it doesnt look like attaching the receiver on your original cover has added any bulk or thickness right? Do you think it will fit the neo hybrid case.
Amazon has these receivers for 10 bucks or so.. i was planning to get one of these receivers and then get the TYLT pad for charging.. I was reading reviews accross various forums, and people are having high opinions about TYLT's features.
MANswers said:
One the posts mentioned in the wireless charging thread..
http://detail.tmall.com/item.htm?sp...289ff7c5f8bb4fe28bbdb230a58&scene=taobao_shop
and
http://dx-box.com/qi-wireless-charg...msung-galaxy-note-iii-3-n900-n9005-n9000.html
Looks like these recievers can be easily inserted into the back cover.. anyone tried it yet? or whats your opinion about this?
Adding the official samsung back cover with 2mm is not a big issue, but i dont wan to loose the phone protection without a neo hybrid.
Thanks that is great information. Can you post the amazon link?
Click to expand...
Click to collapse
The cheap one may have been from eBay, or it's gone up.
Best price I see for a kit now is $48, http://www.amazon.com/Standard-Wire..._1_3?s=wireless&ie=UTF8&qid=1382047175&sr=1-3
There is a $10 qi insert:
http://www.amazon.com/Docooler-Stan...1382048041&sr=1-19&keywords=note+3+qi+charger
plus a $20 charging pad:
http://www.amazon.com/DigiYes®-Stan...1382048041&sr=1-23&keywords=note+3+qi+charger
By the way, I ordered an insert from that seller, it said "in stock" but the expected delivery time was 24 to 43 days once I got the order in. It does seem like you should know that before ordering.
Sent from my Nexus 10 using xda app-developers app
gnik luap said:
The cheap one may have been from eBay, or it's gone up.
Best price I see for a kit now is $48, http://www.amazon.com/Standard-Wire..._1_3?s=wireless&ie=UTF8&qid=1382047175&sr=1-3
There is a $10 qi insert:
http://www.amazon.com/Docooler-Stan...1382048041&sr=1-19&keywords=note+3+qi+charger
plus a $20 charging pad:
http://www.amazon.com/DigiYes®-Stan...1382048041&sr=1-23&keywords=note+3+qi+charger
By the way, I ordered an insert from that seller, it said "in stock" but the expected delivery time was 24 to 43 days once I got the order in. It does seem like you should know that before ordering.
Sent from my Nexus 10 using xda app-developers app
Click to expand...
Click to collapse
Thanks for that info, i was about to place an order with that seller.. why wait for over a month when you can get the same from a US seller for the same price.
I was wondering if the receiver for Note 2 will work on the Note 3.
Many a US sellers are selling the recievers for Note 2.
http://www.ebay.com/itm/Qi-Wireless...l_Phone_PDA_Chargers&var=&hash=item565c879fa2

Does the Spigen Neo Hybrid fit with OEM wireless charging back cover?

Does the Spigen Neo-Hybrid and/or the Slim Armor case fit with the official Samsung wireless charging back cover?
jteran5 said:
Does the Spigen Neo-Hybrid and/or the Slim Armor case fit with the official Samsung wireless charging back cover?
Click to expand...
Click to collapse
No
Just a question : do you know if there are some signal loss with the case put on the phone (either wifi or gsm) : how many DB (decibel) do you lose on the signal while putting it ?
Are there ANY cases that fit around the OEM wireless charging back? Preferably not a cheapo case...
jsdecker10 said:
Are there ANY cases that fit around the OEM wireless charging back? Preferably not a cheapo case...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2502501
Did anyone manage to find a case? Its a shame as I would have thought someone would have filled this niche by now and made a case for the OEM cover.
Unfortunately I learnt the hard way, bought the handset and wireless charging cover and found that it didn't fit my Spigen Neo Hybrid - so I haven't migrated from my S3 LTE yet
Just get the wireless insert pad pad and it works with the spigen
Sent From My Galaxy Note 3
keynith said:
Just get the wireless insert pad pad and it works with the spigen
Sent From My Galaxy Note 3
Click to expand...
Click to collapse
Thought as much, however it does make the original cover bulge? Also it doesn't utilise the OEM wireless charging cover which I paid for frustratingly.
bigfella8656 said:
Thought as much, however it does make the original cover bulge? Also it doesn't utilise the OEM wireless charging cover which I paid for frustratingly.
Click to expand...
Click to collapse
You can remove the foam pads and it doesn't add a bulk to the original back cover
Sent From My Galaxy Note 3
Ok great thanks.

Adding wireless charging & magnets?

The Nexus 5/7 has Qi charging built-in and will stick to the magnetic Nexus Wireless Charging Pad.
I have seen this for the Note 3 that will add Wireless charging: http://www.amazon.com/dp/B00GMRXD9U/
and this magnetic car dock that comes with a metal plate: http://www.amazon.com/dp/B00DPMNNUO/
Is it possible to add both to the Note 3 without changing to a thicker battery cover?
I would like to know also. Can anyone advise? Thanks in advance..
I just spoke to another user via PM.
Apparently the nGroove Snap holds the phone pretty well using just the official Samsung Wireless Charging Cover, without an additional metal plate. Looking at pics online, i can see that there's some more metal in that cover, maybe that's why it works.
I had also read about people putting the metal plate behind their batteries - but I have no idea how thick it actually is.
The second one is good.
anyone knows of a similar pass through coil in Uk, i mean ebay UK or amazon.

A non-slip, non-s view cover/case with wireless charging and NFC?

It may be a tall order, but I use my phone in a car dock, and don't want the s-view window. I would like an open face protective case/back replacement that allows for wireless charging without blocking the NFC receiver, that is non-slip (kinda like the speck cases with fingers). Anyone come across something like this? Or will I have to buy a case and a wireless charging pad and hope my NFC still works? All suggestions appreciated!!
Have you tried the official wireless battery cover from Samsung? Sounds like that is what you're looking for. Slightly thicker than the one that came with the phone but it has builtin wireless charging and doesn't mess up NFC
Sent from my SM-N900T using Tapatalk
hamsup1o said:
Have you tried the official wireless battery cover from Samsung? Sounds like that is what you're looking for. Slightly thicker than the one that came with the phone but it has builtin wireless charging and doesn't mess up NFC
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
Yep, this!
White - http://www.samsung.com/us/mobile/cell-phones-accessories/EP-CN900IWUSTA
Black - http://www.samsung.com/us/mobile/cell-phones-accessories/EP-CN900IBUSTA
Please continue this in the dedicated wireless charging thread here >>> http://forum.xda-developers.com/showthread.php?t=2438168
Thread closed.

Desk stand that allows for S-View case

Hello,
Just wondering if anyone has a cheap desk stand that can cope with the Note in it's official S-View case.
Some are moulded to only hold it without any case on.
Also one that provide data as well as charge would be good as I've noticed some are just power.
Thanks,
Daniel
Nintendo wii u gamepad stand paired with a cable to the computer is how I do it. 6 bucks.
http://m.gamestop.com/catalog/product/104837
Sent from my SM-N900V using Tapatalk
diggott said:
Hello,
Just wondering if anyone has a cheap desk stand that can cope with the Note in it's official S-View case.
Some are moulded to only hold it without any case on.
Also one that provide data as well as charge would be good as I've noticed some are just power.
Thanks,
Daniel
Click to expand...
Click to collapse
$3 Business card holder from Staples
http://www.staples.com/Staples-Punched-Metal-Business-Card-Holder/product_329888

Categories

Resources