Galaxy s4 showing andoid is updating without running update - Verizon Samsung Galaxy S 4

Just the other day I had a weird thing happen. I rebooted my phone and when booting I saw Android is updating, followed by optimizing apps and starting apps. I had not run any update of any kind at all. The phone booted fine and ran fine afterwards. Now everytime I reboot the phone, I get the same message Android is updating then it says starting apps and then the phone boots up as normal. Anyone know why this is happening? Is this a problem? I had a similar thing happen on my tablet and when I ran a firmware update afterwards then started getting all kinds of errors.
If this is a problem how do I fix it? And with this happening should I not run any updates?
I am rooted and on stock firmware with no updates installed.
Thanks in advance everyone!

This happens when cache is cleared, anytime you flash a ROM or kernel you are supposed to wipe cache and most packages will do this for you. Your tablet doing this after a firmware upgrade is normal, the errors weren't.
Now if your phone is doing it every reebot it probably means one of two things: 1 your system is wiping cache every shutdown for some reason or 2 your cache partition is corrupted.
If you are unrooted I recommend talking to Verizon (or whomever you purchased it from) about warranty, if its rooted I would try wiping cache and dalvik cache through your recovery (this will cause it to happen one more time but might prevent a second or third) and see if it keeps doing it after three reebots. If that doesn't work wipe everything (cache, dalvik cache, and user data) and reflash your ROM or another ROM. If that doesn't do it either unroot and talk to Verizon about warranty (after resetting the flash counter)
Sent from my SCH-I545 using xda app-developers app

What's the right way to wipe the cache and dalvik then? Should I use titanium backup? Not sure how to do it from recovery on this phone. And will doing this have any side effects?
Thanks again
Also, I haven't flashed any roms or new kernels.

Please, any and all responses and ideas. Im sure the last person that replied knows what he/she is talking about but I just need a lil more info...
Thanks again all!
Sent from my rooted Galaxy S4

Depending on the release, MDk, ME7, MI1, MJ7 you may not be able to wipe the cache manually from the recovery menu.
Whn I was on ME7, no problem. Now that I'm on MI1, I can't do a manual wipe.

Related

Problem flashing Huawei Ascend for Metro

(I searched before asking)
So I'm flashing my buddy's Metro Ascend. I got it rooted. Flashed CWM Recovery 2.x.x.x. (The common one, .5.1.8, I think). It hangs if I try to format the cache, period. Hangs during factory reset, wipe cache and format cache. I stupidly flashed anyway and it seemed to work, but after a reboot, the entire system seems broken. Force closes left and right and the Launcher doesn't load. It still received incoming calls at first, but now it doesn't even do that. I'm not too familiar with troubleshooting this particular phone and my friend really needs it fixed. So please, someone help me? (No lectures or flaming please, just advice. I'm not looking for motherly scolding about my irresponsibility )
Sent from parts unknown.
Probably need to wipe the phone clean and flash rom again. If cwm is not working good try Amon Ra.
There's also a system format file floating around that you can flash in recovery to wipe your system clean.
Thanks. Never heard of Amon Ra but I'll look it up. The inability to finish the wipe data/factory reset kills me. I know my way around a Captivate with my eyes closed, but this is all goofy to me.
Still open to suggestions if anyone else has something to add. Easy way back to stock? Suggestions for a good rom/mod to flash? (Currently attempting Icarus 1.0)
Sent from parts unknown.

Need help with booting

hey guys, been here since the launch of evo. rooting, flashing, everything.
today i wanted to switch roms. so i went about my normal process...
d/l new ROM
backup current ROM
backup apps
wipe cache and dalvic
flash new ROM
i got stuck on the last step. i went to flash the new ROM (nocturnal 1.3)
it said something along the lines of blah blah is already unmounted. i didnt pay too much attention to it because i was going to restart and try again. long story short, it will only boot to htc white screen and nothing else.
can anyone help me out?
p.s. im on clockwork recovery
PLEASE CLOSE
did you not wipe system and data? I am not super skilled, but maybe it tried to stick the entire ROM into the left over space of the last ROM that is still on there?
It won't boot to recovery? It should boot to recovery
weezymagic said:
hey guys, been here since the launch of evo. rooting, flashing, everything.
today i wanted to switch roms. so i went about my normal process...
d/l new ROM
backup current ROM
backup apps
wipe cache and dalvic
flash new ROM
i got stuck on the last step. i went to flash the new ROM (nocturnal 1.3)
it said something along the lines of blah blah is already unmounted. i didnt pay too much attention to it because i was going to restart and try again. long story short, it will only boot to htc white screen and nothing else.
can anyone help me out?
p.s. im on clockwork recovery
Click to expand...
Click to collapse
The error message you received is going to be the key to understanding the issue that occured. When it says unmounted, it is referring to a specific partition, either /data or /system most likely.
For starters, when it hangs on the htc white screen, this is usually either a kernel or ramdisk issue. If the kernel is known to be good, then it is probably a ramdisk issue. most ramdisk issues relate to a mismatch/incompatibility between the loaded kernel and the ROM.
First suggestion would be to reflash the ROM, clearing /cache and /data.
Second suggestion would be to restore a backup. This will confirm there is nothing wrong with your device hardware wise and you'll know it is a specific issue with the ROM you wanted to load.
Third suggestion, find the exact error, word for word, which occured in recovery and post up in the ROM thread asking if other users of that ROM also encountered, how they handled. Also feel free to post back up here.
When writing the programming behind a custom recovery, the error messages are added in there to help allow users and developers better knowledge of the exact issue so they can work to resolve them. Without the exact error message, it is similar to going to a car shop and saying, some light came on my dash, but I don't know what it was and now the car doesn't work. Fix it? Another words, it is very vague.
Hope the suggestions and tips help! Good luck!
my first instinct was to reflash the backup or new rom again but it wont boot to any rom, recovery or bootloader. it just hangs on the htc white screen
idk what happened but i got into the bootloader through battery pull, power+vol down. i know ive tried that in the past but this time it worked. now im restoring a nandroid from yesterday
weezymagic said:
idk what happened but i got into the bootloader through battery pull, power+vol down. i know ive tried that in the past but this time it worked. now im restoring a nandroid from yesterday
Click to expand...
Click to collapse
are you on twrp 1.0.x ? There is s charging issue where it won't restart right because it thinks It's already in recovery
sent from my EVO 3D via XDA app
weezymagic said:
hey guys, been here since the launch of evo. rooting, flashing, everything.
today i wanted to switch roms. so i went about my normal process...
d/l new ROM
backup current ROM
backup apps
wipe cache and dalvic
flash new ROM
i got stuck on the last step. i went to flash the new ROM (nocturnal 1.3)
it said something along the lines of blah blah is already unmounted. i didnt pay too much attention to it because i was going to restart and try again. long story short, it will only boot to htc white screen and nothing else.
can anyone help me out?
p.s. im on clockwork recovery
PLEASE CLOSE
Click to expand...
Click to collapse
You missed a step. After you wipe dalvik and cache, you ALWAYS need to wipe /system and /data, do a factory reset to make sure, or download a superwipe tool. The ONLY time you don't need to wipe completely is when you're updating your ROM, but even then it is recommended to wipe everything.
Twolazyg said:
You missed a step. After you wipe dalvik and cache, you ALWAYS need to wipe /system and /data, do a factory reset to make sure, or download a superwipe tool. The ONLY time you don't need to wipe completely is when you're updating your ROM, but even then it is recommended to wipe everything.
Click to expand...
Click to collapse
Agreed^^^^^

[Q] Help Getting A Working Rom after Bootloader Unlock

Hi all,
I have a Droid incredible 4g (stock, unrooted/unlocked, w/ the recent OTA update). I saw the Bootloader Unlock exploit in the developer's forum so I gave it a go, and it worked fine. Then I installed the Viper 1.0 ROM, but I haven't been able to get it to do anything after successfully booting except run through a loop of errors such as "Unfortunately, the process android.process.acore has stopped working." After I click "OK" on about 10 critical errors, it self-reboots and does the whole thing again.
Unfortunately, I didn't do a backup this time, so I have nothing to restore (first time I haven't done a backup, but also the first time I've ever had any kind of an issue w/ a ROM). I tried using the HTC Android ROM Update Utility 1.0.5.2011 that I found in the dev forum, but that didn't work either. Finally, I installed 2.17.605.2 Verizon Global Sense4.1 Android 4.0.4. It's a lot more stable than Viper was and the phone is basically usable, but I still get lots of critical errors. So this morning I went back to the forum and saw that I needed to downgrade to the old 1.43.605.3 kernel. I tried that and then reinstalled Viper 1.0, but it seemed to have no effect--still stuck in a critical error/reboot loop.
I realize that's the risk of playing with ROMs and I should have done a backup, but anyone have any ideas on how I can get my phone back and running?
Thanks!
Even though it explicitly stated you didn't need to do a backup, I did one anyway, to prevent something like this from happening. Always do a backup.
Did you verify the MD5Sum of ViperLTE?
Did you go to Recovery and Wipe -> Factory Reset and Wipe -> System both twice before trying to install the ROM?
Did you change anything in the ROM before attempting to load it?
There are lots of questions we could ask to ascertain the root of the problem, but these three are among the most important.
Wi-Fi won't work without the old boot.img, and from what I can tell, that's the only thing. It doesn't give critical errors.
I'm thinking since you are new to root you were un-aware the need to wipe before installing a rom.
im thinking that is the issue.
Thanks for the reply!
I didn't check the MD5 last night but I did just now and it matches.
I did a cache wipe the first time but not a system wipe. Then I started getting more desperate and tried reinstalling w/ system wipes and factory resets, but it didn't change anything.
No, I didn't change the ROM. Doing the Bootloader unlock exploit was about the absolute maximum of my technical abilities! The only thing I know I did wrong was that I didn't downgrade to the old boot version the first time (mainly because the wifi thing sounded inconsequential and I didn't want to learn the procedure if I didn't have to).
Anyway, I just tried Ultimate KangBang and it seems to work--no error messages so far. I don't know what I did wrong, but hopefully this keeps working!
IceDragon59 said:
Even though it explicitly stated you didn't need to do a backup, I did one anyway, to prevent something like this from happening. Always do a backup.
Did you verify the MD5Sum of ViperLTE?
Did you go to Recovery and Wipe -> Factory Reset and Wipe -> System both twice before trying to install the ROM?
Did you change anything in the ROM before attempting to load it?
There are lots of questions we could ask to ascertain the root of the problem, but these three are among the most important.
Wi-Fi won't work without the old boot.img, and from what I can tell, that's the only thing. It doesn't give critical errors.
Click to expand...
Click to collapse
andybones said:
I'm thinking since you are new to root you were un-aware the need to wipe before installing a rom.
im thinking that is the issue.
Click to expand...
Click to collapse
Yes, I took a short-cut that didn't quite work out. I didn't want to wipe the system because I wasn't sure if my pictures would be wiped too, but then when everything died I tried wiping everything and reinstalling and it didn't seem to improve anything. I did end up losing my pictures too. Oh well. Maybe it's just a combination of stuff I did to try to get things working (there was some trial and error in unlocking the bootloader but I did get that to work finally, and then more trial and error with the ROMs).
I guess the best thing to do is leave the phone the heck alone as long as it's working, for now. I just don't know why nothing seemed to work--I thought factory reset/fresh ROM would do it.
franklin411 said:
Yes, I took a short-cut that didn't quite work out. I didn't want to wipe the system because I wasn't sure if my pictures would be wiped too, but then when everything died I tried wiping everything and reinstalling and it didn't seem to improve anything. I did end up losing my pictures too. Oh well. Maybe it's just a combination of stuff I did to try to get things working (there was some trial and error in unlocking the bootloader but I did get that to work finally, and then more trial and error with the ROMs).
I guess the best thing to do is leave the phone the heck alone as long as it's working, for now. I just don't know why nothing seemed to work--I thought factory reset/fresh ROM would do it.
Click to expand...
Click to collapse
If UKB ROM works then Viper ROM will too, installing the boot.img is very simple it's one command
I can help you with that if you'd like
in recovery before installing ROM, do a wipe of, (I go in this order, but it doesn't matter.)
1) Factory Reset
2) System
3) Cache
4) Dalvik Cache
then install the ROM
just DO NOT do External storage (unless of coarse u WANT to wipe your SD-Card.)
as long as you don't wipe External Storage you won't lose anything that's on your SD-Card.
in the future it is always good practice to backup(nandroid) your current ROM. I have been burned too many times, always do a nandroid before you do anything in recovery.
your photos are normally saved to the SD, flashing ROMs or wiping the system will not delete them
andybones said:
If UKB ROM works then Viper ROM will too, installing the boot.img is very simple it's one command
I can help you with that if you'd like
in recovery before installing ROM, do a wipe of, (I go in this order, but it doesn't matter.)
1) Factory Reset
2) System
3) Cache
4) Dalvik Cache
then install the ROM
just DO NOT do External storage (unless of coarse u WANT to wipe your SD-Card.)
as long as you don't wipe External Storage you won't lose anything that's on your SD-Card.
Click to expand...
Click to collapse
It worked this time! Maybe the difference was that the boot.img file I downloaded was called "boot_signed.img" or something. I had no idea what it was supposed to look like, so I installed it that way and it didn't work. Then I tried renaming it to "boot.img" this morning and installing viper, but that didn't work. And then I restarted and installed UKB, and it worked. Just now I wiped and tried again with Viper and it's working fine. Maybe I did something this morning that caused it not to take properly when I tried with Viper, and then I reset and it worked.
Thanks for the help!
franklin411 said:
It worked this time! Maybe the difference was that the boot.img file I downloaded was called "boot_signed.img" or something. I had no idea what it was supposed to look like, so I installed it that way and it didn't work. Then I tried renaming it to "boot.img" this morning and installing viper, but that didn't work. And then I restarted and installed UKB, and it worked. Just now I wiped and tried again with Viper and it's working fine. Maybe I did something this morning that caused it not to take properly when I tried with Viper, and then I reset and it worked.
Thanks for the help!
Click to expand...
Click to collapse
na the name has nothing to do with it. it can be named whatever.
im guessing the wipe worked.
franklin411 said:
Hi all,
I have a Droid incredible 4g (stock, unrooted/unlocked, w/ the recent OTA update). I saw the Bootloader Unlock exploit in the developer's forum so I gave it a go, and it worked fine. Then I installed the Viper 1.0 ROM, but I haven't been able to get it to do anything after successfully booting except run through a loop of errors such as "Unfortunately, the process android.process.acore has stopped working." After I click "OK" on about 10 critical errors, it self-reboots and does the whole thing again.
Unfortunately, I didn't do a backup this time, so I have nothing to restore (first time I haven't done a backup, but also the first time I've ever had any kind of an issue w/ a ROM). I tried using the HTC Android ROM Update Utility 1.0.5.2011 that I found in the dev forum, but that didn't work either. Finally, I installed 2.17.605.2 Verizon Global Sense4.1 Android 4.0.4. It's a lot more stable than Viper was and the phone is basically usable, but I still get lots of critical errors. So this morning I went back to the forum and saw that I needed to downgrade to the old 1.43.605.3 kernel. I tried that and then reinstalled Viper 1.0, but it seemed to have no effect--still stuck in a critical error/reboot loop.
I realize that's the risk of playing with ROMs and I should have done a backup, but anyone have any ideas on how I can get my phone back and running?
Thanks!
Click to expand...
Click to collapse
weird, i was having the same problem with the same processes stopped working. i wiped cache dalvik and system but not factory reset. once i factory reset, it worked fine. i figured a system wipe would have been enough....

[Q] Note not bricked, but extremely sluggish!

Hey guys, had a Note for a little while now and was running stock AT&T GB. I tried upgrading to ICS a couple of times using other threads in this forum, but I'd keep getting stuck in a boot loop and had to revert back to stock AT&T GB to recover my device per Da_G's method here: http://forum.xda-developers.com/showthread.php?t=1506330, and it worked fine.
However, I recently tried one more time to upgrade to ICS, failed and reverted back to stock AT&T GB per Da_G's method, and while my phone turns on, it has become sluggish to the point of being absolutely unusable. Screen touches work fine in some cases, and then take forever to register in the same spot later. The on screen keyboard cannot be invoked - it almost always hangs the phone. And the phone randomly reboots.
I did forget to wipe cache and dalvik cache the last time around while doing the install, and that probably caused this problem. But sine then I've wiped both caches and retried flashing, and also reinstalled a stock AT&T radio in case that was the problem, and also reset the flash counter per braway's methode here: http://forum.xda-developers.com/showthread.php?t=1569206, but to no avail...
My Note is pretty much useless at this time, so any light you guys can shed or any other tack you can suggest is going to help me immensely!
Thanks for the help!
Sid.
Wiping caches is not enough. You need to to a full data wipe/factory reset. At this point why not just flash your phone with Odin.
http://www.samsdroid.com/2012/07/i717uclf6-android-404-usa-at-stock-rom.html
This will fully wipe your phone and install the UCLF6 ICS ROM with matching radio.
Agoattamer said:
Wiping caches is not enough. You need to to a full data wipe/factory reset. At this point why not just flash your phone with Odin.
Click to expand...
Click to collapse
Sorry, I didn't mention - I DID do a factory wipe/data reset and I've been flashing the stock GB ROM via ODIN itself. But thanks for the link to the ICS ROM - I'll try installing this and report back.
Okay, I downloaded the UCLF6 ROM from the samsdroid site (took like 3 hours to download!), performed several factory data resets, cache wipes and dalvik cache wipes on my phone, and then flashed the ICS ROM via Odin. Odin showed "Passed", but the phone rebooted into recovery with a message "failed to mount /system" and "failed to mount /data". I then hit "reboot system now" and am stuck at boot loop. Booted back into recovery, got the same message about not being able to mount system and data. Hit "reboot system" again and back to boot loop...
What the heck am I doing wrong???
Please read forum rules before posting
Questions and help issues go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
You do have an ATT i717 and not a canadian version? But I think your phone has other issues.
It is an AT&T SGH-i717. I've used it for 6 months now and it worked fine - it just never let me upgrade it to anything beyond GB... and now it is unusable even with GB.
Do you think it might be a hardware issue? Although, how could flashing and reflashing ROMs impact the hardware?
If the odin flashing did not straighten things out then I have to believe that there are other issues.
sid.asu said:
It is an AT&T SGH-i717. I've used it for 6 months now and it worked fine - it just never let me upgrade it to anything beyond GB... and now it is unusable even with GB.
Do you think it might be a hardware issue? Although, how could flashing and reflashing ROMs impact the hardware?
Click to expand...
Click to collapse
Did you try to flash ICS with Samsung Kies? If that doesn't work, your phone may have developed a hardware problem.
i have had the same issues as well, i am unsure if its me or what but everytime i have tried to flash a tmobile rom on my note which should work it slows down to a crawl i cannot even go through the setup process. I have tried via odin and through cwm touch. the next thing i flashed was t879uvlg3 modem and i was wondering if that was the issue and if so what modem should i flash that way i dont have to use kies for recovery cause man..........thats slow. I even made a nandroid backup and it was slow as well so if anyone has had this issue or any ideas please help me
oort cloud said:
Did you try to flash ICS with Samsung Kies? If that doesn't work, your phone may have developed a hardware problem.
Click to expand...
Click to collapse
My problem is that the phone does not stay on long enough for Kies to detect it - it keeps rebooting on GB. Well, guess it's cooked! Thanks for the help!

[Q] general question

I browsed through the general q&a and i am not finding exactly what i am looking for, so please hold the yelling if i missed it. but i am not against being told where to go....
background info....I purchased a DNA off of EBay and i turned it on, and got it going. The SW version is current, stock rooted and the phone is S-Off. The phone still had some of the guys pictures on it, so i jumped in to recovery (CWM touch recovery) and wiped the phone, cache, and restarted. When i did the phone hung, and never booted, so i held the power button down, it then rebooted, checked the apps and all was good. his pics are still on the phone.....going through the phone and wiping (backup and reset) and it's the same thing....
So my question is, what can i do to get the phone back to square one, fully clean but still keep the root and s-off? the reason i am asking is when i wiped it wouldnt boot properly. should i reflash a stock rooted rom? whats the best way to wipe the internal memory? i have rooted and rom'd going back to the original droid, but the HTC's always intimidate me. So please any suggestions they would be welcome. I want to get it stock, then make a perfect good backup, then start trying some roms.....
Thanks in advance!
So I read up a little more, and decided that the best thing to do was Format the SD card. After i did that, i wiped everything again and after it boots, it still just hangs. Then i hold power down and it restarts and i get the "android is upgrading screen" then i am fine. So i am still concerned that it never boots properly. So my question still stands..... should i download another stock rom, or is there something else i should do?
mooseknuckles said:
So I read up a little more, and decided that the best thing to do was Format the SD card. After i did that, i wiped everything again and after it boots, it still just hangs. Then i hold power down and it restarts and i get the "android is upgrading screen" then i am fine. So i am still concerned that it never boots properly. So my question still stands..... should i download another stock rom, or is there something else i should do?
Click to expand...
Click to collapse
if you wipe the phone in recovery ( im assuming /data, /cache, /dalvik, and/or /system) you would have to flash a new ROM on top of that, because you are wiping the entire thing. i dont think you can do a regular wipe in CWM and expect it to boot after that. but, yes, for what you want, formatting /sdcard would probably suffice.
[indiferenc] said:
if you wipe the phone in recovery ( im assuming /data, /cache, /dalvik, and/or /system) you would have to flash a new ROM on top of that, because you are wiping the entire thing. i dont think you can do a regular wipe in CWM and expect it to boot after that. but, yes, for what you want, formatting /sdcard would probably suffice.
Click to expand...
Click to collapse
I don't think cwm wipes the rom by selecting factory reset in it.
Sent from my HTC6435LVW using xda premium
It doesn't, and if he had wiped system it never ever ever would have booted even after resetting it 9001 times.
Wiping data, factory reset, same thing different terms for different versions of recoveries, technically wiping data would delete sdcard with /data/media but usually doesn't. Format SD and a factory reset/data wipe would be what he's looking for, but it not booting afterwards is an issue pointing to something else.
I'd suggest looking at your current ROM version then getting a rooted version and flashing it then seeing if it persists. Any ROM will do, really, I just said that way if you want to stay on that version of sense.
Tapatalked from my HTC DNA - ReVolt

Categories

Resources