Hello!
I've followed this tut: http://forum.xda-developers.com/showthread.php?t=2099784
After that, i got some problem:
1. LGOG bootup to Nexus screen animations, so long > 5 minutes, i've tried "fastboot -w".
2. I've flashed stock rom ICS, V10c, then flash conversation .bin file, LGOG stoped in nexus bootanimations. :crying:
How do i convert my LGOG to Nexus 4???? My device is running stock rom 4.1.2 v20j .
Thank you so much! and sorry for my bad English
nguyenhonganh said:
Hello!
I've followed this tut: http://forum.xda-developers.com/showthread.php?t=2099784
After that, i got some problem:
1. LGOG bootup to Nexus screen animations, so long > 5 minutes, i've tried "fastboot -w".
2. I've flashed stock rom ICS, V10c, then flash conversation .bin file, LGOG stoped in nexus bootanimations. :crying:
How do i convert my LGOG to Nexus 4???? My device is running stock rom 4.1.2 v20j .
Thank you so much! and sorry for my bad English
Click to expand...
Click to collapse
do it again fastboot -w thats your problem... and check if your phone really is connect with pc.. in fastboot mode..
Make sure you have Nexus 4 driver install in your pc
Sent from my Nexus 4 using Tapatalk 2
carnes said:
do it again fastboot -w thats your problem... and check if your phone really is connect with pc.. in fastboot mode..
Click to expand...
Click to collapse
I'm sure, i typed "fastboot devices" and Nexus driver was installed.
I think After LGOG has converted to nexus 4, the internal storage has came ZERO Byte, so nexus 4 can't bootup.
Anyone have idea for me ?
nguyenhonganh said:
I'm sure, i typed "fastboot devices" and Nexus driver was installed.
I think After LGOG has converted to nexus 4, the internal storage has came ZERO Byte, so nexus 4 can't bootup.
Anyone have idea for me ?
Click to expand...
Click to collapse
Go into recovery and do a factory reset. Then go into fastboot and unlock the bootloader and install a customr recovery like CWM or TWRP. Then, go back into custom recovery and in advanced format SD Card. Reboot phone and good luck
leminh2000 said:
Make sure you have Nexus 4 driver install in your pc
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Hello. i've typed "fastboot -w" successful, but my device is not bootup and stoped at Nexus 4 bootanimations. Please help me again
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Shouldn't have even tried this to begin with.
Sent from my LG Optimus G using XDA Premium 4 mobile app
DeathmonkeyGTX said:
Shouldn't have even tried this to begin with.
Sent from my LG Optimus G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
QFT
Sent from my LG-E970 using XDA Premium 4 mobile app
Very simple- I've done this conversion many times, you just need to do something very simple- get to fastboot, and use the command fastboot oem lock and then fastboot oem unlock
after that you'll get a bootloader unlocking menu, press unlock, it will boot and all will be well.
Good luck!
Related
Universal Nexus Linux Toolkit v2.3.0
NOW COMPATIBLE WITH MAC OSX!!!
Universal Nexus Linux Toolkit is a bash script based program that offers an easy way
to do all you need to do before flashing a custom ROM on your Nexus device.
It works with:
1. Nexus 4 [mako]
2. Nexus 10 [manta]
3. Nexus 7 (WiFi) [grouper]
4. Nexus 7 (GSM) [tilapia]
5. Galaxy Nexus (GSM) [maguro]
6. Galaxy Nexus (Verizon) [toro]
7. Galaxy Nexus (Sprint) [toroplus]
8. Nexus S (worldwide version, i9020t and i9023) [crespo]
9. Nexus S (850MHz version, i9020a) [crespo]
10. Nexus S (Korea version, m200) [crespo]
11. Nexus S 4G (d720) [crespo4g]
With this toolkit you will be able to:
- Unlock the bootloader.
- Flash CWM recovery (Standard or Touch).
- Root the phone.
- Lock the bootloader.
- Flash Google Factory Image. (Not available for Sprint Galaxy Nexus)
DOWNLOAD IT FOR LINUX HERE
DOWNLOAD IT FOR MAC OSX HERE
Galaxy Nexus Linux Toolkit is Open Source! See the CODE
HOW TO EXECUTE:
Please extract the .tgz in the place you want, for example in /home/user
Open a terminal and type the following:
>[email protected]: cd "THE PATH WHERE IS THE unltlauncher.sh FILE"
>[email protected]: bash ./unltlauncher.sh
If you extract it in /home/user/unlt, the path to the .sh must be /home/user/unlt
so you have to type:
>[email protected]: cd /home/user/unlt
>[email protected]: bash ./unltlauncher.sh
Note: If you're running on a 64 bits OS, please install 32 bits libraries. If you're running on Linux and you didn't configure UDEV rules for your device, please run the script with superuser permissions (sudo bash unltlauncher.sh)
Here are some SCREENSHOTS::good:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I hope you will find it useful! :laugh:
P.S. Sorry for my English. I'm from Argentina!
Possible to use this on OSX(similar to linux)?
eep2378 said:
Possible to use this on OSX(similar to linux)?
Click to expand...
Click to collapse
Not sure, try it and tell me if it works. :laugh:
If someone tried it please let me know if everything's OK.
Sent from my Galaxy Nexus using xda app-developers app
tatelucas said:
If someone tried it please let me know if everything's OK.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
EVERYTHING WORKS GREAT AFTER BATTLING ROOT ALL NIGHT THIS THING WORKED in 2 seconds THANK YOU SO MUCH tatelucas! Now i can start devvin Liquid rom for mako GO!
Just used this. Excellent work. Tried using the standard adb way and just couldn't get the bootloader unlocked. Thank you so much for this!
Can this be used for mac as well?
Edit I see this question has been posted. Awaiting confirmation.
dscottjr81 said:
Can this be used for mac as well?
Edit I see this question has been posted. Awaiting confirmation.
Click to expand...
Click to collapse
No, I'm sorry it doesn't work on Mac.
nocoast said:
EVERYTHING WORKS GREAT AFTER BATTLING ROOT ALL NIGHT THIS THING WORKED in 2 seconds THANK YOU SO MUCH tatelucas! Now i can start devvin Liquid rom for mako GO!
Click to expand...
Click to collapse
jnewman1991 said:
Just used this. Excellent work. Tried using the standard adb way and just couldn't get the bootloader unlocked. Thank you so much for this!
Click to expand...
Click to collapse
That's great!!! I'm really happy to hear that. Please tell me which modes and options you tried. :good:
N73G
Any news on making it work on the nexus 7 3G?
Otherwise it looks like a really good tool for all my Nexi.
I tried the cwm way of unlocking and rooting my N4 and everything seemed to work fine. I did the method where I kept my stock recovery however I can't access it. If I use your tool and flash the stock image will this wipe everything on my device?
Yes, I'm sorry factory reset option will delete all data.
Sent from my Galaxy Nexus using xda app-developers app
tatelucas said:
Yes, I'm sorry factory reset option will delete all data.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
So it will be just like it came to me from google? Locked and not rooted.
harpo1 said:
So it will be just like it came to me from google? Locked and not rooted.
Click to expand...
Click to collapse
It will be just like it came from Google, but with unlocked bootloader. If you also want to lock the bootloader you have to run the lock bootloader option after running the Factory reset option.
Sent from my Galaxy Nexus using xda app-developers app
oldarney said:
Any news on making it work on the nexus 7 3G?
Otherwise it looks like a really good tool for all my Nexi.
Click to expand...
Click to collapse
Nexus 7 WiFi option should work for all options except for the factory reset option. Please do not flash the Nexus 7 WiFi factory image on your Nexus 7 3G.
Sent from my Galaxy Nexus using xda app-developers app
What is the advantage to locking the bootloader once you are finished?
Also, not that it matters, but will your phone stop receiving OTA updates if you root it?
folkg said:
What is the advantage to locking the bootloader once you are finished?
Also, not that it matters, but will your phone stop receiving OTA updates if you root it?
Click to expand...
Click to collapse
It will only stop getting OTA if you replace recovery, you will still get the notice, it just won't install
After rooting using the toolkit, my phone sticks at the 'Google' screen but won't boot into Recovery. Should I try the process again?
aSquard said:
After rooting using the toolkit, my phone sticks at the 'Google' screen but won't boot into Recovery. Should I try the process again?
Click to expand...
Click to collapse
Try again using Manual Mode instead of Auto Mode. Please let me know if everything's OK.
tatelucas said:
Try again using Manual Mode instead of Auto Mode. Please let me know if everything's OK.
Click to expand...
Click to collapse
Thanks, I got everything working finally. Had to put the stock recovery again for some reason, and start over. This phone is awesome!!
Sent from Inque and XDA Premium
Hello everyone! As Some Users have this problem,and many others of you can have it too,I'm writing this guide to get back to LG's ICS when you're coming from CM10. This also works for Unbricking your device.
Warning,Dragons Ahead! BEFORE YOU START DOING THIS,I'M NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR PHONE,THIS HAS BEEN TESTED AND WORKING!
Requirements::
A Windows Based PC(This has been tested under Windows 7 SP1 64-Bit,I'm not sure it will work under Windows 8)
L7 With CM10 on it
Homero's V10K with CWM,ROOT and Unlocked Bootloader which you can find here: http://forum.xda-developers.com/showthread.php?t=2176430 credits to Homero for making the KDZ.
KDZ_FLASHER which you can find at the end of the post.
LG USB Drivers Installed
ADB which you can find at the end of the post.
So,Let's Start!
1. Once You've Downloaded Homero's V10K,Extract the ZIP and you will find a .KDZ file.
2. Now Download KDZ_FW_UPDATE.zip and extract it,then open the folder where you extracted it and Start KDZ_FW_UPDATE_EN with Administrator Rights (Right Click on file and select Run As Administrator...)
3. Once the program started,in Type select 3GQCT and in Phone Mode select EMERGENCY, then in KDZ File select the precedently downloaded Homero's V10K kdz file and press open.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Make Sure your Phone is connected to the computer in EMERGENCY MODE( Remove the battery from the phone,then while pressing Vol+ Connect the usb to the computer,a yellow screen must come up showing EMERGENCY)
5. Once you've done this,press Launch Software Update and let it work,the procedure takes about 5-10 Minutes,so don't worry.
6. At the end of the procedure the phone will reboot and an LG Animated Logo will come up,and after some minutes KDZ_FW_UPDATE Will say you that there has been an error,Don't panic
7. With still the phone connected to the PC,Download ADB zip at the end of the post and extract it in your C:/ Drive,then open up CMD and write:
Code:
cd ADB
adb devices(just to make sure that the computer recognizes your phone)
adb reboot recovery
8. Now your phone will reboot in CWM Recovery, just do Wipe Data/Cache,Wipe Cache,Wipe Dalvik(Which is situated in Advanced Menu). When you have done this,select Reboot System and wait for your phone to finish the boot,and ENJOY!Good as new! :victory:
That's all,I Hope I could help you!
Thanks To:
-Homero2 for making the V10K KDZ Flashable with ROOT,CWM and Unlocked Bootloader
This is actually the same thing as unbricking your phone you know...
Sent from my LG-E610 using xda premium
dev-DaT said:
Thuis is actually the same thing as unbricking your phone you know...
Sent from my LG-E610 using xda premium
Click to expand...
Click to collapse
Yep,I've done a mistake when I wrote the guide :cyclops: I'll correct it
Wolf80 said:
Yep,I've done a mistake when I wrote the guide :cyclops: I'll correct it
Click to expand...
Click to collapse
hi wolf, follow everything on your tutorial but my phone stock on boot animation. Any recommendation?
Edit: Phone back to live again, but using the button combination. I was not able to boot using the adb command.
Thanks to you and homero for the guide.
vaikz said:
hi wolf, follow everything on your tutorial but my phone stock on boot animation. Any recommendation?
Edit: Phone back to live again, but using the button combination. I was not able to boot using the adb command.
Thanks to you and homero for the guide.
Click to expand...
Click to collapse
When the phone reboots,you have to wait 2-3 mins till it connects,then write adb devices in cmd and it should figure in devices list Anyway I'm glad I could help ya
Thanks for the tutorial. Saved my ass.
com975 said:
Thanks for the tutorial. Saved my ass.
Click to expand...
Click to collapse
You're welcome man
does this method also work for e610?
xstatik said:
does this method also work for e610?
Click to expand...
Click to collapse
I don't know man,I tested it only on P700,there should be a guide somewhere for E610
does this tut goes with p880
Hi,
So yesterday I wanted to reset my phone because it was getting a bit to laggy. I full reset it through the wizard on the phone and it went in instant bootloop.
I had flashed ICS on my Xperia Sola before and unlocked the bootloader.
I tried googling for some solutions and I followed this solution: http://forum.xda-developers.com/xperia-u/general/how-to-resolve-softbrick-upgrade-to-ics-t2023135
But the problem I find is that it just does not work for me. I always get this error on flashtool:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I also tried restoring it with the Sony program but when I try to connect the device I get an error that this cannot be done with a windows 8 computer.
If anyone knows how to fix this I would be so greatfull..
Thanks and kind regards!
Graspop said:
Hi,
So yesterday I wanted to reset my phone because it was getting a bit to laggy. I full reset it through the wizard on the phone and it went in instant bootloop.
I had flashed ICS on my Xperia Sola before and unlocked the bootloader.
I tried googling for some solutions and I followed this solution: http://forum.xda-developers.com/xperia-u/general/how-to-resolve-softbrick-upgrade-to-ics-t2023135
But the problem I find is that it just does not work for me. I always get this error on flashtool:
I also tried restoring it with the Sony program but when I try to connect the device I get an error that this cannot be done with a windows 8 computer.
If anyone knows how to fix this I would be so greatfull..
Thanks and kind regards!
Click to expand...
Click to collapse
Anyone?
Try setting compatibility mode for the programme you are trying to run on windows 8 that don't run
Sent from my SM-T211 using xda app-developers app
From the flashtool log, your phone seems to connect and instantly disconnect from flash mode. Try using Win 7 with proper driver (flashmode,fastboot and adb) first if you can. Otherwise check your battery too if it depleted.
Sent from my Xperia P using XDA Premium 4 mobile app
sscsps said:
Try setting compatibility mode for the programme you are trying to run on windows 8 that don't run
Sent from my SM-T211 using xda app-developers app
Click to expand...
Click to collapse
Could you give me some more instructions on that?
kopter3161 said:
From the flashtool log, your phone seems to connect and instantly disconnect from flash mode. Try using Win 7 with proper driver (flashmode,fastboot and adb) first if you can. Otherwise check your battery too if it depleted.
Sent from my Xperia P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Got the same on W7, how do I check if the battery is depleted? Since its a hardboxed battery.
Fastboot
about 1 month ago, i got this error
try flash any kernel which has RECOVERY, then enter to recovery and give it FULL format, now reflash your ftf or push custom rom and flash
Graspop said:
Got the same on W7, how do I check if the battery is depleted? Since its a hardboxed battery.
Click to expand...
Click to collapse
Just press the power on button. If the red led blinking means your battery is low thus you cant boot your device up. If no red led blinking then your battery depleted.
Sent from my Xperia P using XDA Premium 4 mobile app
Hello.. I changed my moto's screen, the problem is that when I turn on the mobile, It doesn't start.. After 1 second It restart, and restart and restart. If I'm not using the usb connected to my laptop, the mobile don't turn on. I can enter to the "AP fastboot flash mode(secure)" but I can not enter to the Recovery mode, I had had installed the TWRP. Before It happend I was using the CM 13.
My phone is a moto e2 surnia xt1527. I think that I broke the phone when I tried to start the phone without the screen because I thought that I made a hard brick. Adb doesn't recognize my device. What's the problem? Does it have a solution?
PD: Sorry for my english! Thanks!!!
Did you try re installing the Stock rom again?
Sent from my Xiaomi Mi 5 using XDA Labs
harish15 said:
Did you try re installing the Stock rom again?
Sent from my Xiaomi Mi 5 using XDA Labs
Click to expand...
Click to collapse
Yes but It didn't work. I successfully flashed a lot of TWRP versions, but the phone reboots when I try to enter to the recovery mode.
Can be the problem that the fastboot is in the secure mode? ("Ap fastboot flash mode (secure)")
ADB is locked.
OEM is locked.
I cannot enter to the system to unlock this options.. Is there any way to unlock in the fastboot?
shepele said:
Yes but It didn't work. I successfully flashed a lot of TWRP versions, but the phone reboots when I try to enter to the recovery mode.
Can be the problem that the fastboot is in the secure mode? ("Ap fastboot flash mode (secure)")
ADB is locked.
OEM is locked.
I cannot enter to the system to unlock this options.. Is there any way to unlock in the fastboot?
Click to expand...
Click to collapse
Yes.. It is.. Unlock the bootloader first from fb
Sent from my Xiaomi Mi 5 using XDA Labs
harish15 said:
Yes.. It is.. Unlock the bootloader first from fb
Sent from my Xiaomi Mi 5 using XDA Labs
Click to expand...
Click to collapse
OEM is locked.. I cannot enter the system to unlock it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What can I do?
shepele said:
OEM is locked.. I cannot enter the system to unlock it.
What can I do?
Click to expand...
Click to collapse
Can you make it to the recovery?
Sent from my Xiaomi Mi 5 using XDA Labs
harish15 said:
Can you make it to the recovery?
Sent from my Xiaomi Mi 5 using XDA Labs
Click to expand...
Click to collapse
No, the phone reboots when i try to enter
There's no way to install BIOS again?
Nero03 said:
There's no way to install BIOS again?
Click to expand...
Click to collapse
Yes, I succesfully reinstall the bios, but It didn't work... Maybe The baterry is broken because It doesn't turn on unless the device is connected to the PC..
shepele said:
Yes, I succesfully reinstall the bios, but It didn't work... Maybe The baterry is broken because It doesn't turn on unless the device is connected to the PC..
Click to expand...
Click to collapse
And... If you reinstall the custom recocery and the stock ROM flashing with PC?
Nero03 said:
And... If you reinstall the custom recocery and the stock ROM flashing with PC?
Click to expand...
Click to collapse
Yes
shepele said:
Yes
Click to expand...
Click to collapse
Does It work?
unfortunately, no.. It doesn't have solution.
shepele said:
unfortunately, no.. It doesn't have solution.
Click to expand...
Click to collapse
Sorry man. The only thing I think you can try is install everything with fastboot commands using the PC
I'm having problems getting TWRP to install. I followed the guide on this site, but I guess it's outdated, and didn't work. Could someone please give me instructions on how to install TWRP on a Asus Zenwatch 2?
Thanks.
Try my guide: https://youtu.be/2YB0rz98tS0
Poebat said:
Try my guide: https://youtu.be/2YB0rz98tS0
Click to expand...
Click to collapse
I tried the guide... it didn't work for me. After i install twrp... reboot and it goes to the android error screen when rebooting into recovery... tried multiple times.
Sent from my SAMSUNG-SM-G935A using Tapatalk
simplesid242002 said:
I tried the guide... it didn't work for me. After i install twrp... reboot and it goes to the android error screen when rebooting into recovery... tried multiple times.
Sent from my SAMSUNG-SM-G935A using Tapatalk
Click to expand...
Click to collapse
Weird. What does fastboot say after flashing the recovery?
simplesid242002 said:
I tried the guide... it didn't work for me. After i install twrp... reboot and it goes to the android error screen when rebooting into recovery... tried multiple times.
Sent from my SAMSUNG-SM-G935A using Tapatalk
Click to expand...
Click to collapse
did you unlock your bootloader?
Sorry guys got busy with work. Matze... bootloader is unlocked...
Poebat... everything says complete. Looks like it flashed recovery. But didn't. Ill add a vid. Ill go thru the whole process again.
Sent from my SAMSUNG-SM-G935A using Tapatalk
simplesid242002 said:
Sorry guys got busy with work. Matze... bootloader is unlocked...
Poebat... everything says complete. Looks like it flashed recovery. But didn't. Ill add a vid. Ill go thru the whole process again.
Click to expand...
Click to collapse
Okay. Good luck!
Just went tgru it all again.... still have android recovery. Pics attached.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SAMSUNG-SM-G935A using Tapatalk
simplesid242002 said:
Just went tgru it all again.... still have android recovery. Pics attached.View attachment 4112315View attachment 4112316View attachment 4112317
Sent from my SAMSUNG-SM-G935A using Tapatalk
Click to expand...
Click to collapse
Try to flash other twrp
simplesid242002 said:
Just went tgru it all again.... still have android recovery. Pics attached.
Click to expand...
Click to collapse
Got it! After you flash the recovery, do fastboot reboot and then swipe from the top right corner to the bottom left.
Poebat said:
Got it! After you flash the recovery, do fastboot reboot and then swipe from the top right corner to the bottom left.
Click to expand...
Click to collapse
Yeah you have to boot into twrp first, booting to Android Wear will replace it with stock.
Lrs121 said:
Yeah you have to boot into twrp first, booting to Android Wear will replace it with stock.
Click to expand...
Click to collapse
Yep. You were right... i didnt boot into twrp first... all is working now. Thanx
Sent from my SAMSUNG-SM-G935A using Tapatalk