[Q] Is there test screen on 10.1? - Galaxy Tab 10.1 Q&A, Help & Troubleshooting

Hello, I tryed to google but got lost in milion of test and reviews.. I have one short question.
I am about to buy second hand 10.1 and question: is there some kind of test screen (like it was on my galaxy s2 with entering *#0*# I could check all the basic functions of device)
So is there anything like that and how could I reach it?

Related

[Q] Use galaxy s3 as a Note 2

everyone, this is what leads me to: our phone (gs3) with very little difference with Note2, I was wondering if it was possible to use it with the apk note2 namely S-Note. I use very often a capacitive stylus with my s3 and I would like to go further with. I am currently in JB with my GS3. I tried to fonctioner S-Note Version ICS but the application does not start at all.
Is there a project porting the ROM S3 S2?? Or is there a solution to run SNOTE? as well as the new Note 2 on S3?
Thank you in advance.
s note was on the gs3 when it first came out, can't remember when they removed it tbh

[Q] Using Galaxy s3 Motherboard for experimental device

Hello everyone, I have what some may consider a bizarre question. I am wondering if it is possible to use a galaxy s3 motherboard for an experimental device. For example, buy a screen assembly of a larger size, maybe 10 inch and use the motherboard to power it up. If its not possible with this phone in specific, could it be with another one? In case that it were possible, what would be the complications involved with this process. Thanks!

Galaxy S3 screen failed after contact with water. Suggestion needed

Hi,
My Galaxy S3's display stopped working after contact with water. Touch works but display does not work.
Display and touch replacement(touch and display are embedded together in S3 so need to change both) costs around Rs.8000 ($131). But there is a phone named Galaxy S3 Neo which costs just Rs.12000 ($196) and is almost the same configuration of Galaxy S3 I9300.
I am not sure how S3 Neo differs from S3 I9300 in performance. Please suggest me whether I can replace the S3's display or go for brand new S3 Neo.
neo vs s3 intl
Does the neo have gorilla glass ? Make sure then buy . S3 i9300 is Exynos chipset and s3 neo i9300l is qualcomm . You decide , in my opinion go for the neo if possible as its a newer phone and more ram and posibility of a lollipop upgrade .
open the phone, clean it and make it dry and pray a lot...
but I think the situation is almost hopeless
It's time for device upgrade.
If you wish to keep the device, maybe look for screen replacement, make sure to get original replacement

Ulefone Be Touch 3

Hi Guys,
I am looking for a method to root the Ulefone Be touch 3.
I have some problems with the sensitivity of the screen and i need root access to modify build.prop.
If someone have a solutions
Thanks
Check this out http://www.needrom.com/download/be-touch-3-twrp/ i rooted mine with that
Many thanks
Have you some problems with sensitivity's screen ?
Like when you write a sms quickly, the screen follow ?
Be Touch 3
Hi,
I have just bought a Ulfone Be Touch 3. I'm fairly impressed with the phone so far apart from the touch screen sensitivity as you mentioned.
I'm coming from a Samsung so its really noticeable.
I have rooted my Be Touch and edited the build.prop but that hasn't made any difference to the touch screen at all.
I would just like to no if anyone has made any more progress with this issue?
You need to disable the vibrate-on-touch option to make typing smoother and more responsive.
Hi, i have tested the ulefone be touch 3, is see not much improvements compared to the touch 2.
I think the battery is the same beyond the sticker on it. The system speed feel the same, the fingerprints
is faster, battery life sucks again, it run only for 24 hour in normal use a few social media apps running in backgroud
like it have to be. and wifi on. (without simcard) and few times screen on (low br). in comparison with the touch 2, 18 hour.
System this time it's real android 5.1 (touch 2 a 5.0 not a 5.1)
So i think no ulefone anymore. The description deviates too much from reality, that ulefone presents on the website.
The big problem is the rom take to much energy and the battery is 50% to small.
Hi guys , I also have a be touch 3 , the only issue I have is the fingerprint reader will code in but then never recognises the finger to unlock, not an issue for me as I prefer pattern unlock, I find the battery much better than my last chinese phone , the mstar s700 which performed well but battery was shocking. I get a full day out of a charge which s all I expect from a budget phone , everything else is good so far ( 2 months) , Construction is good and I don't experience screen lag. Obviously any improvement tips would be useful...
Very first LK.BIN for ulefone Be Touch 3 needed
SOLVED
Hi,
I flashed my Ulefone Be Touch 3 device with Ulefone's ROM and ... big mistake : soft bricked.
The device still works except the screen : a dark blue one with no logo, no icon, etc.
From what I read, I can get screen back to normal with the very first lk.bin file but i can only find recent (and thus faulty) ROMs.
Could someone help me ?
Thanks in advance.
Best regards.
---
SOLVED : there are 4 different ROMs from Ulefone for this device.
Downloaded each one (mega links so use Tor browser if you're blocked in your country) and tested them all.
Screen is now back.
Also check this for Be Touch 3 goodies :
- http://www.htcmania.com/forumdisplay.php?f=2049 --> here you can get some beta ROMs
Cheers :emoji_laughing:
Volunteers needed, really !!
Hi all,
I can see there are custom ROMs (nougat 7.1.1) for Vernee Thor and Jisatsu smartphone.
Both of them use the MTK 6753 SoC.
I can't find a single custom ROM for the Ulefone Be Touch 3, MTK 6753-based too ...
Has anyone heard sth about this ?
I think it shouldn't be that tough to build such a ROM, but I'm not able to do so, at all.
SOME VOLUNTEER ... ??
Thx in adv.

Samsung Galaxy Tab S SM-T805 Trusted Face / Face Unlock

Hi,
i have a Samsung Galaxy Tab S LTE 10.5 SM-T805 (040306-228608434)-15085017_minAPI23(armeabi-v7a)(320dpi).
I have use with my old Tab10.1 from 2014 ever Trusted Face / Face unlock
and have works perfectly for me , also on driving with my Car (Caravelle VWbus),
because i have made a Tablet holder for it in front of my steering wheel ..
and i miss it, it was a very nice option. :good:
( i guess the loading adapter is crashed in the tab10.1 and i had must buy an other Tablet )
it's there any possible for become a Trusted Face/Face unlock into my "used" SM-T805 ? :fingers-crossed:
i can work with odin ... if there exist a mod for my sm-t805 be i am very happy.
best regards
Blacky

Categories

Resources