Hello XDA-users,
I just installed the CarbonROM for my D802.
Now when I install Viper4AndroidFX I get no effect at all.
I tried to force it, I tried to run in compatible mode, I've tried various drivers.
When I click on Driver-Status, it tells me: Processing : no.
Can someone tell me what I'm doing wrong?
Maybe it's just not compatible with Carbon-ROM? Or with 4.3.1? I don't know....
Need to use SuperSU. Its the same thing on all 4.3 aosp roms.
Flash this in recovery
http://download.chainfire.eu/351/
I just tried it and it still shows me "processing:no".
Related
Hello All. I have built the latest version of OmniROM for the e970. I pretty much tweaked the kernel and device tree from CyanogenMod to get it working. The first nightly ran today (7/9/2014). You should see a nightly around 1:00AM (Central Time) from here on out.
I'm using this as my daily driver with no issues.
Please install at your own risk as I am not responsible for damage you may cause to your own device.
Requirements
Your recovery must support Kit-Kat ROMs
TWRP 2.7.1.0 (Compiled with OmniROM 4.4.4 device tree) - This is not flashable. You must either manually load it using dd from adb or an app like Nandroid Manager in the Play Store.
http://goo.gl/hrd5uN
Mini Modular PA GApps
BaNkS GApps
If you want root, you must install is separately. You should only have to flash this the first time.
SuperSU Flashable
Downloads
http://goo.gl/rtpTVL
First installation
- Download gapps and the latest nightly build
- Reboot to recovery
- Flash the nightly build then gapps
- Root access must be installed seperately from http://download.chainfire.eu/451/SuperSU/
- WIPE DATA!!!
- Reboot and enjoy your KitKat
Known Issues
- NFC Not working
- Bluetooth Tethering not working
- GPS not working - Fixed 7/4/2014
- Fixed issue I found with the dialer. 7/8/2014
- I stopped using the vendor files from TheMuppets github as they were incomplete and pulled them directly from my phone. There is a script in the device tree to do it for those who want to build on their own.
Sources
https://github.com/rjwil1086/lge-kernel-gproj
https://github.com/rjwil1086/android_device_lge_e970
https://github.com/rjwil1086/android_device_lge_ls970-common
https://github.com/CyanogenMod/android_device_lge_gproj-common
https://github.com/TheMuppets/proprietary_vendor_lge
Created: 2014-06-29
Last Updated: 2014-07-23
using this ROM latest build [07/08/2014] with neighborhood hackers kernel & screen tears a lot, gonna try without it & report.
EDIT: The latest build does not have proper root access :/
I don't think OmniROM has SU built in. It can be downloaded from http://download.chainfire.eu/451/SuperSU/ and flashed in TWRP or CWM. I'll add this to the OP.
Gabxter101 said:
using this ROM latest build [07/08/2014] with neighborhood hackers kernel & screen tears a lot, gonna try without it & report.
EDIT: The latest build does not have proper root access :/
Click to expand...
Click to collapse
Hi Rjwil1086,
I want to know is this ROM enable OTG to connect pen drive or other external devices. As default this device is not enable.
Thanks in advance.
Regards,
Bharat.
It looks like there is a hack out there based on Nexus 4 code. I have not implemented such a change to the kernel, and I don't think the gproj kernel comes with it (anyone correct me if I'm wrong). Right now I'm focusing on optimization and bug fixes. Once I feel comfortable that everything is working as intended I may start modifying things.
shinde_bharat said:
Hi Rjwil1086,
I want to know is this ROM enable OTG to connect pen drive or other external devices. As default this device is not enable.
Thanks in advance.
Regards,
Bharat.
Click to expand...
Click to collapse
Clean flashed the latest nightly today and found that NFC doesn't work. It doesn't turn on. Can anyone confirm ?
I think there is a file missing from the proprietary files. I'll try to fix it this weekend
Sent from my LG-E970 using XDA Premium 4 mobile app
Thanks. Another thing I want to point out is that this app WORD WEB DICTIONARY which I use on a regular basis gives an error of no external sd card detected. Which is weird since the sd card is present. I had the same issue on stock 4.4.2 rom that has been ported for e970. Another app that ZEDGE fails to download anything even though the WiFi is connected same behavior on the stock rom with it too.
Photosphere/HDR/Panorama working on this rom?
Hi Team,
I need your help in installing OmniRom on my E970. I was using CM11 and CMW recovery 6.0.3.8 but when i tried to install omnirom its failed to install. please guide me how to install Omnirom.
Regards,
Bharat.
shinde_bharat said:
Hi Team,
I need your help in installing OmniRom on my E970. I was using CM11 and CMW recovery 6.0.3.8 but when i tried to install omnirom its failed to install. please guide me how to install Omnirom.
Regards,
Bharat.
Click to expand...
Click to collapse
update recovery
bgkone said:
update recovery
Click to expand...
Click to collapse
I currently updated recovery from 6.0.3.8 to CWM base Philz touch 6.0.4.6 but still unable to install OMNIROM. giving me error while installing.
Error:
Finding update package...
Opening update package...
E:Can't open /storage/sdcard1/omni-4.4.4-20140723-e970.nightly.zip
(bad)
Installation aborted.
press any key to continue.
Please suggest which recovery version should i use to successfully install OMNIROM.
Regards,
Bharat.
shinde_bharat said:
I currently updated recovery from 6.0.3.8 to CWM base Philz touch 6.0.4.6 but still unable to install OMNIROM. giving me error while installing.
Error:
Finding update package...
Opening update package...
E:Can't open /storage/sdcard1/omni-4.4.4-20140723-e970.nightly.zip
(bad)
Installation aborted.
press any key to continue.
Please suggest which recovery version should i use to successfully install OMNIROM.
Regards,
Bharat.
Click to expand...
Click to collapse
i am using philz touch 6.48.4 from http://forum.xda-developers.com/showthread.php?t=2693628 and twrp http://www.androidfilehost.com/?fid=23578570567715220
perhaps even that the .zip is bad, redownload again
bgkone said:
i am using philz touch 6.48.4 from http://forum.xda-developers.com/showthread.php?t=2693628 and twrp http://www.androidfilehost.com/?fid=23578570567715220
perhaps even that the .zip is bad, redownload again
Click to expand...
Click to collapse
I even tried with re download but again same problem. I also tried TWRP but no luck. CM11 nightly is installing well on CWM as well as TWRP but facing issue with OMNIROM.
required your expert help.
I just installed the 7/23 build and had no issues. I am running TWRP 2.7.1.0 that I compiled. Here is the link http://goo.gl/hrd5uN. This is not a flashable zip. You will need to flash it from adb using dd or one of those fancy apps available on the Play Store that will flash recovery images. I like Nandroid Manager, but I'm sure others will work too. I will also add this to the OP, and this can be compiled using the same device tree as OmniROM in the OP.
I haven't forgotten about the NFC issue and I found out Bluetooth tethering isn't working either. I'm going to try to get to these this week but work is keeping me busy for the moment.
shinde_bharat said:
I even tried with re download but again same problem. I also tried TWRP but no luck. CM11 nightly is installing well on CWM as well as TWRP but facing issue with OMNIROM.
required your expert help.
Click to expand...
Click to collapse
I'm not a camera person, so I'm not sure if this is working. I can't seem to get it to create photosphere shots but panorama is working. HDR isn't an option with the built in camera app. Please let me know if the camera isn't working as intended and if you can fix it let me know and we can incorporate the fix in the device tree.
bgkone said:
Photosphere/HDR/Panorama working on this rom?
Click to expand...
Click to collapse
i really like neighborhood hacker kernel, but every time i try to use it on any of your builds it gives me great battery but at the cost of my screen tearing sometimes, any possible way to fix that?
rjwil1086 said:
I just installed the 7/23 build and had no issues. I am running TWRP 2.7.1.0 that I compiled. Here is the link http://goo.gl/hrd5uN. This is not a flashable zip. You will need to flash it from adb using dd or one of those fancy apps available on the Play Store that will flash recovery images. I like Nandroid Manager, but I'm sure others will work too. I will also add this to the OP, and this can be compiled using the same device tree as OmniROM in the OP.
I haven't forgotten about the NFC issue and I found out Bluetooth tethering isn't working either. I'm going to try to get to these this week but work is keeping me busy for the moment.
Click to expand...
Click to collapse
I tried with latest build of OMNIROM dated 24th July 2014 and all version compatible recovery with e970 but unable to success in installing OMNIROM. Is there anything can do like recreating entire partition structure so that this can be install on my e970.
Require you expert view in resolving my issue.
Hi Can we use neighborhood hacker kernel with Omnirom 25th nightly without any problem. I tried to flash it but after reboot its stuck to google and not action further, Could you please let me know the process.
shinde_bharat said:
Hi Can we use neighborhood hacker kernel with Omnirom 25th nightly without any problem. I tried to flash it but after reboot its stuck to google and not action further, Could you please let me know the process.
Click to expand...
Click to collapse
I'm using it on my phone, but get some light stutters & screen tear while swiping in apps or in the launcher. really like the kernel tho :/ would also love to see an update for it. it's been long since it was updated.
Update: It works fine if you update twrp before flashing your ROM.
artrex654 said:
I have rooted my phone using stumproot and have also installed Illusion custom rom... However I cant install Gapps. Every time I try it fails in status 7. I dont know what that means or what to do although I've tried 3 different Gapps packages. If anyone can help before I decide to flash back to stock that would be great.
Click to expand...
Click to collapse
do you have the newest twrp installed? shouldnt matter, i used to run illusion off 2.8.0, but its the only thing i can think of.
TWRP crashes when I install it
I installed a cm based ROM on my phone, I like it. But I want to go back to kk. When I enter recovery which is now cm it gives me an error when I try install a different ROM. ROM manager says I have duel but I can only use the CyanogenMod one.
RealityFails said:
I installed a cm based ROM on my phone, I like it. But I want to go back to kk. When I enter recovery which is now cm it gives me an error when I try install a different ROM. ROM manager says I have duel but I can only use the CyanogenMod one.
Click to expand...
Click to collapse
The problem with the recovery that comes with CyanogenMod lollipop is that you are very limited to what you can flash. I recommend you download multi rom, just download the application from the playstore and give it root access, check off that you want the recovery and it should do the rest, you will then have twrp recovery and you can flash a kitkat based rom from it.
I downloaded an app from the store was able to bypass cm. I then installed cm11 which had no recovery I spent 2 hours looking and saw you had replied I installed the app and it put cwm, so thank you. Not having gapps and recovery is scary. Thanks.
3Hi, have anyone try to flash the latest Paranoid Custom Rom build version 5.1 for our S3 i9300??
I cant flash it even my steps was correct.
Anyone have any idea?
There few errors,
when i try to install the gapps it always say error status 6
so i just skip it try to boo the device.
But it told me that my phone root access is not found.
Not sure what happened.
Hey guys
I installed CM 13.0 (2016/01/02) on my i9300
Then installed GApps and everything was working fine
TWRP Recovery and SU were installed too
When I tried to open SU though (to enable root options) it said that SU Binary was not installed and that I had to manually re-root it
I used the CF-Auto-Root method but I still got the same message
Then I remember that I had installed a Kernel on my S4 i9500 when I had updated it to CM 12.1
So I googled and downloaded SiyahKernel v1.9.1
Now my phone is stuck on the boot-up. I get the S3 logo, then a purple eye and then a blank screen
I tried booting into recovery and reinstalling CM 13 but it just closes after displaying "Installing update"
Download mode re-rooting doesn't remove the kernel
Another website suggested I use another kernel but I wanted to get help before I did any more stupid things
Any help is appreciated
Joserin said:
Hey guys
I installed CM 13.0 (2016/01/02) on my i9300
Then installed GApps and everything was working fine
TWRP Recovery and SU were installed too
When I tried to open SU though (to enable root options) it said that SU Binary was not installed and that I had to manually re-root it
I used the CF-Auto-Root method but I still got the same message
Then I remember that I had installed a Kernel on my S4 i9500 when I had updated it to CM 12.1
So I googled and downloaded SiyahKernel v1.9.1
Now my phone is stuck on the boot-up. I get the S3 logo, then a purple eye and then a blank screen
I tried booting into recovery and reinstalling CM 13 but it just closes after displaying "Installing update"
Download mode re-rooting doesn't remove the kernel
Another website suggested I use another kernel but I wanted to get help before I did any more stupid things
Any help is appreciated
Click to expand...
Click to collapse
Looks like you totally screwed it up. Siyah on CM13?! you gotta be kidding me. Never ever install siyah again unless you're on stock ROM. Now I recommend 2 methods to you:
1. Backup efs and put it on your PC if you didn't back it up before. Full wipe your phone using twrp. Then extract the CM13 zip file on your PC then grab the boot.img file to an SD and put it on your phone and flash it using twrp. It will recover the stock CM13 kernel and then try to flash your CM13 zip. Better to download the updated ones. Be sure to use the latest twrp. And always use CM13 official root in developer options, trust me it's better.
2. If you couldn't flash CM13 again the only way I recommend is to flash stock using odin and then flash from the ground and bring your phone up.
JohnSmit268 said:
Looks like you totally screwed it up. Siyah on CM13?! you gotta be kidding me. Never ever install siyah again unless you're on stock ROM. Now I recommend 2 methods to you:
1. Backup efs and put it on your PC if you didn't back it up before. Full wipe your phone using twrp. Then extract the CM13 zip file on your PC then grab the boot.img file to an SD and put it on your phone and flash it using twrp. It will recover the stock CM13 kernel and then try to flash your CM13 zip. Better to download the updated ones. Be sure to use the latest twrp. And always use CM13 official root in developer options, trust me it's better.
2. If you couldn't flash CM13 again the only way I recommend is to flash stock using odin and then flash from the ground and bring your phone up.
Click to expand...
Click to collapse
It's okay I fixed it. I installed QS i9300 and then re-flashed CM and GApps. But the SuperSU is still bugged
A cursory reading said that CM is auto-rooted on stable versions and there is no stable version of CM 13 for the i9300 yet so I guess that might be the issue. The phone's working fine now, just no root access :3
Joserin said:
It's okay I fixed it. I installed QS i9300 and then re-flashed CM and GApps. But the SuperSU is still bugged
A cursory reading said that CM is auto-rooted on stable versions and there is no stable version of CM 13 for the i9300 yet so I guess that might be the issue. The phone's working fine now, just no root access :3
Click to expand...
Click to collapse
You read it wrong. It already have internal root. Go to setting--> about device and then tap build number constantly to enable developer settings. There you can find root access options. Turn it on for apps only or adn and apps and done.
Thank me if I helped you.:good:
JohnSmit268 said:
You read it wrong. It already have internal root. Go to setting--> about device and then tap build number constantly to enable developer settings. There you can find root access options. Turn it on for apps only or adn and apps and done.
Thank me if I helped you.:good:
Click to expand...
Click to collapse
I already did that.. Root Checker Basic says I do not have proper root access and the TWRP Manager tool also says I do not have root
It is really weird. I'm on i9300 official nightlies and have working root!
I rooted my S3 with this (by m0xx) https://download.chainfire.eu/229/CF-Root/CF-Auto-Root/CF-Auto-Root-m0-m0xx-gti9300.zip
I downloaded the 20160102 Nightly from this website https://download.cyanogenmod.org/?device=i9300
GApps from this website (ARM, 6.0, Stock) http://opengapps.org/
and TWRP via ODiN with https://twrp.me/devices/samsunggalaxys3internationalexynos.html (twrp-2.8.6.1-i9300.tar)
Idk if I did anything wrong or downloaded an older version... I know there's TWRP 2.8.7 but I dunno how to install the img file, I knew tar would be compatible with ODiN
Joserin said:
I rooted my S3 with this (by m0xx) https://download.chainfire.eu/229/CF-Root/CF-Auto-Root/CF-Auto-Root-m0-m0xx-gti9300.zip
I downloaded the 20160102 Nightly from this website https://download.cyanogenmod.org/?device=i9300
GApps from this website (ARM, 6.0, Stock) http://opengapps.org/
and TWRP via ODiN with https://twrp.me/devices/samsunggalaxys3internationalexynos.html (twrp-2.8.6.1-i9300.tar)
Idk if I did anything wrong or downloaded an older version... I know there's TWRP 2.8.7 but I dunno how to install the img file, I knew tar would be compatible with ODiN
Click to expand...
Click to collapse
If twrp offers to root then don't do that method. Flash superSU 2.4.6.zip and on reboot you will see the app logo in your drawer or if not there it will be above developer options in settings. Open and allow it to update binary.
kush2.0 said:
If twrp offers to root then don't do that method. Flash superSU 2.4.6.zip and on reboot you will see the app logo in your drawer or if not there it will be above developer options in settings. Open and allow it to update binary.
Click to expand...
Click to collapse
Already tried that. SU binary just doesn't update. I even downloaded the Update zip and flashed from recovery, it still asks to update the binary after reboot. There is no TWRP option to update the binary either, it directly goes to the normal method and fails everytime. Tried like 20 times probably
I'd say flash back to stock and start over. Installing siyah probably borked something.
shivadow said:
I'd say flash back to stock and start over. Installing siyah probably borked something.
Click to expand...
Click to collapse
The only reason I installed Siyah was because the binary wasn't installed. Multiple attempts to root didn't fix the issue.
Also I did flash stock ROM because after installing Siyah the phone wouldn't go past the S3 logo screen
What recovery version are you using then?? ??
---------- Post added at 04:02 PM ---------- Previous post was at 03:58 PM ----------
Joserin said:
The only reason I installed Siyah was because the binary wasn't installed. Multiple attempts to root didn't fix the issue.
Also I did flash stock ROM because after installing Siyah the phone wouldn't go past the S3 logo screen
Click to expand...
Click to collapse
I really dont thing a custom kernel for cm13 aosp roms exists for sgs3 gti9300
kush2.0 said:
What recovery version are you using then?? ??
Click to expand...
Click to collapse
kush2.0 said:
What recovery version are you using then?? ??
---------- Post added at 04:02 PM ---------- Previous post was at 03:58 PM ----------
I really dont thing a custom kernel for cm13 aosp roms exists for sgs3 gti9300
Click to expand...
Click to collapse
Yea I didn't know that before I installed it (it was 3 AM I was frustrated at SU)
Current TWRP version is 2.8.6.1
Joserin said:
Yea I didn't know that before I installed it (it was 3 AM I was frustrated at SU)
Current TWRP version is 2.8.6.1
Click to expand...
Click to collapse
Personally I would download twrp manager from play store if you havnt already got it. Flash/install twrp 2.8.7.X and boot into the newer twrp and flash superSU 2.4.6.zip. Try that before going back to stock.
kush2.0 said:
Personally I would download twrp manager from play store if you havnt already got it. Flash/install twrp 2.8.7.X and boot into the newer twrp and flash superSU 2.4.6.zip. Try that before going back to stock.
Click to expand...
Click to collapse
Uhm TWRP Manager doesn't work without root. Already tried that
@Joserin, you did your very best to make it complicated. Go back to firmware to get a clean base, as said several times before. Firmware doesn't mean a Touchwiz-based custom-ROM! Download it from sammobile.com and follow the instructions on downloadsite.
Joserin said:
Uhm TWRP Manager doesn't work without root. Already tried that
Click to expand...
Click to collapse
Yeah sorry you do need root access. Your probably better of doing what rp158
Said. Your twrp recovery isn't up to date enough to install a new cm13 based ROM.
rp158 said:
@Joserin, you did your very best to make it complicated. Go back to firmware to get a clean base, as said several times before. Firmware doesn't mean a Touchwiz-based custom-ROM! Download it from sammobile.com and follow the instructions on downloadsite.
Click to expand...
Click to collapse
Meh Id rather just let it be for what it is. It's my dad's phone and I just wanted him to have AdAway, he's not much of a tech-head.
Thanks people
No root access to S3 when upgraded to CM 13; affecting full access Ext SDcard
Before upgrading to CM 13 for my I 9300 (Int) I was on CM 11 and I had full root access on my device.
In fact I still have that recovery file which I backed up before upgrading to CM 13.
I was able to get root whenever I typed "SU" within the terminal window.
Then CM 13 became available for my device so I upgraded to it by following a few simple steps.
Most Everything works perfectly ...... except for one important problem !
I no longer have root access on my device !!!
Of course the first obvious fix was to try to enable root access by selecting it within the Developer Options to grant root access to Apps and ADB; but that didn't work. And I have tried numerous other possible solutions: reflashing SuperSU2.67, wiping everything clean and reinstalling CM 13 and Gapps from scratch, and other such recommendations but nothing has worked for this problem.
Some of my apps that need to write to the external SD card are unable to work but the apps work if I change the path to the internal storage.
Whenever I need to delete a file from my external SD using ES File Explorer it forces me to go to the CM File manager to approve the deletion.
I am unable to select "Root Access mode" within the CM File manager.
And my little "$" does not change to "#" when I type "SU" in the terminal window.
So all this is definitely a problem with us simply not having root access to our S3 devices.
I really would like to revive this topic because I am pretty sure that Joserin and I are not alone in this one.
The CM 13 is much nicer than the CM 11 and there must be a way to cross this hurdle.
Joserin, please let us know if by chance you have found a solution.
Thanks to all; awaiting your suggestions ......
kevin.a69 said:
Before upgrading to CM 13 for my I 9300 (Int) I was on CM 11 and I had full root access on my device.
In fact I still have that recovery file which I backed up before upgrading to CM 13.
I was able to get root whenever I typed "SU" within the terminal window.
Then CM 13 became available for my device so I upgraded to it by following a few simple steps.
Most Everything works perfectly ...... except for one important problem !
I no longer have root access on my device !!!
Of course the first obvious fix was to try to enable root access by selecting it within the Developer Options to grant root access to Apps and ADB; but that didn't work. And I have tried numerous other possible solutions: reflashing SuperSU2.67, wiping everything clean and reinstalling CM 13 and Gapps from scratch, and other such recommendations but nothing has worked for this problem.
Some of my apps that need to write to the external SD card are unable to work but the apps work if I change the path to the internal storage.
Whenever I need to delete a file from my external SD using ES File Explorer it forces me to go to the CM File manager to approve the deletion.
I am unable to select "Root Access mode" within the CM File manager.
And my little "$" does not change to "#" when I type "SU" in the terminal window.
So all this is definitely a problem with us simply not having root access to our S3 devices.
I really would like to revive this topic because I am pretty sure that Joserin and I are not alone in this one.
The CM 13 is much nicer than the CM 11 and there must be a way to cross this hurdle.
Joserin, please let us know if by chance you have found a solution.
Thanks to all; awaiting your suggestions ......
Click to expand...
Click to collapse
I flashed QSi9300KK on my phone (with kernel. I forget the name but it was the third option - not Agni or stock) and after that TWRP and then CM13. Everything's working fine now, even root access.
Remember do not pick the first two kernels in the installer, they didn't work correctly. Third one works like a charm.