im trying to build android from source on ubuntu 10.04. im on a 64 bit system . but this is what im stuck on.
when i enter the repo command:
repo init -u git://android.git.kernel.org/platform/manifest.git -b eclair
it get this error back
exec: 23: python: not found
any ideas.
python: not found
yeah how do i fix it though?
thanks
install python
i have it installed already v2.6
You may have to install a version of python prior to the version you've got installed. Check which version the SDK is compatible with. =)
INSANENEIVIESIS said:
im trying to build android from source on ubuntu 10.04. im on a 64 bit system . but this is what im stuck on.
when i enter the repo command:
repo init -u git://android.git.kernel.org/platform/manifest.git -b eclair
it get this error back
exec: 23: python: not found
any ideas.
Click to expand...
Click to collapse
Unsure what you have done up to this point. It seems as though your PATH to repo is not set. I'm assuming you have already done this:
$ mkdir ~/bin
$ curl http://android.git.kernel.org/repo >~/bin/repo
$ chmod +x ~/bin/repo
$ export PATH="${PATH}:~/bin"
$ mkdir ~/xdandroid
$ cd ~/xdandroid
Have you checked your PATH settings to make sure ~/bin is in there?
Code:
echo $PATH
If you are following the wiki, the command that's on there for path doesn't work for Ubuntu (I experienced it myself and haven't looked into why...it could be because it needs to be done as sudo). Try this in terminal:
Code:
gedit ~/.bashrc
then go to the end of the file and add this to the end:
Code:
PATH=~/bin:"${PATH}"
Close any terminal windows you have open and then reopen terminal. Try the command again...
just rooted this phone...and now I am using the cyanogen wiki mod guide..
i am at the step here
On the computer, open the terminal and run the following command from the SDK directory:
adb shell mkdir -p /sdcard/Voodoo
but I get this error..
mkdir failed for -p read only filesystem
can someone help me please??
theoctavist said:
just rooted this phone...and now I am using the cyanogen wiki mod guide..
i am at the step here
On the computer, open the terminal and run the following command from the SDK directory:
adb shell mkdir -p /sdcard/Voodoo
but I get this error..
mkdir failed for -p read only filesystem
can someone help me please??
Click to expand...
Click to collapse
It's just a dumb version of the command that doesn't accept the "-p", so just do this instead:
Code:
adb shell mkdir /sdcard/Voodoo
[HOW-TO] Building CM10, AOKP & TeamBaked For The JB Bootloader [Ubuntu 12.04+ 64-bit]
As many of you know, I no longer have my Transformer Prime, and hence cannot continue development for this device. So until the official CM10, AOKP and TeamBaked ROMs are updated to support the new JellyBean bootloader, as a final useful contribution to this device, I decided to provide a how-to guide to help people make their own builds.
This guide assumes that you have some experience building ROMs for Android and that you are comfortable with Linux. It is focused towards building on Ubuntu 12.04+ 64-bit.
1. Prepare the system (common for CM10, AOKP & TeamBaked)
a. Install Java JDK6
Code:
$ wget https://raw.github.com/flexiondotorg/oab-java6/master/oab-java.sh
$ chmod +x oab-java.sh
$ sudo ./oab-java.sh
$ sudo apt-get install sun-java6-jdk
b. Install required applications
Code:
$ sudo apt-get install git-core gnupg flex bison gperf build-essential \
zip curl libc6-dev libncurses5-dev:i386 x11proto-core-dev \
libx11-dev:i386 libreadline6-dev:i386 libgl1-mesa-glx:i386 \
libgl1-mesa-dev g++-multilib mingw32 tofrodos python-markdown \
libxml2-utils xsltproc zlib1g-dev:i386 schedtool pngcrush
$ sudo ln -s /usr/lib/i386-linux-gnu/mesa/libGL.so.1 /usr/lib/i386-linux-gnu/libGL.so
c. Get the repo binary
Code:
$ mkdir -p ~/bin
$ curl https://dl-ssl.google.com/dl/googlesource/git-repo/repo > ~/bin/repo
$ chmod a+x ~/bin/repo
2. Building CM10
a. Get the CM10 source
Code:
$ mkdir -p ~/CM10
$ cd ~/CM10
$ repo init -u git://github.com/CyanogenMod/android.git -b jellybean
$ repo sync -j8
b. Get my JB device, kernel & vendor source trees (You could use any other, just make sure it includes the changes needed for the JB bootloader and has the 3.1 kernel)
Code:
//JB device source to device/asus/tf201
$ mkdir -p ~/CM10/device/asus
$ cd ~/CM10/device/asus
$ git clone git://github.com/craigacgomez/android_device_asus_tf201.git -b cm_jb tf201
//JB kernel source to kernel/asus/tf201
$ mkdir -p ~/CM10/kernel/asus
$ cd ~/CM10/kernel/asus
$ git clone git://github.com/craigacgomez/android_kernel_asus_tf201 -b 10.4.2.15-nvtegra tf201
//JB vendor source to vendor/asus/tf201
$ mkdir -p ~/CM10/vendor/asus
$ cd ~/CM10/vendor/asus
$ git clone git://github.com/craigacgomez/vendor_proprietary_asus_tf201 -b jellybean tf201
c. Comment out CMUpdater since this is not an official build (No harm in leaving it there as long as people are instructed not to use it)
Code:
$ cd ~/CM10/vendor/cm/config/
$ gedit common.mk [comment the line which says CMUpdater \]
d. Resync & build
Code:
$ cd ~/CM10
$ repo sync -j8
$ sh vendor/cm/get-prebuilts
$ . build/envsetup.sh && brunch tf201
3. Building TeamBaked
a. Get the TeamBaked source
Code:
$ mkdir -p ~/BAKED
$ cd ~/BAKED
$ repo init -u https://github.com/TeamBAKED/platform_manifest.git -b jb
$ repo sync -j8
b. Delete the tf201 directories
Code:
$ mkdir -p ~/BAKED/device/asus
$ rm -rf tf201
$ mkdir -p ~/BAKED/kernel/asus
$ rm -rf tf201
$ mkdir -p ~/BAKED/vendor/asus
$ rm -rf tf201
c. Get my JB device, kernel & vendor source trees (You could use any other, just make sure it includes the changes needed for the JB bootloader and has the 3.1 kernel)
Code:
//JB device source to device/asus/tf201
$ mkdir -p ~/BAKED/device/asus
$ cd ~/BAKED/device/asus
$ git clone git://github.com/craigacgomez/android_device_asus_tf201.git -b blackbean_jb tf201
//JB kernel source to kernel/asus/tf201
$ mkdir -p ~/BAKED/kernel/asus
$ cd ~/BAKED/kernel/asus
$ git clone git://github.com/craigacgomez/android_kernel_asus_tf201 -b 10.4.2.15-nvtegra tf201
//JB vendor source to vendor/asus/tf201
$ mkdir -p ~/BAKED/vendor/asus
$ cd ~/BAKED/vendor/asus
$ git clone git://github.com/craigacgomez/vendor_proprietary_asus_tf201 -b jellybean tf201
d. Resync & build
Code:
$ cd ~/BAKED
$ repo sync -j8
$ . build/envsetup.sh && brunch tf201
4. Building AOKP
a. Get the AOKP source
Code:
$ mkdir -p ~/AOKP
$ cd ~/AOKP
$ repo init -u https://github.com/AOKP/platform_manifest.git -b jb
$ repo sync -j8
b. Get my JB device, kernel & vendor source trees (You could use any other, just make sure it includes the changes needed for the JB bootloader and has the 3.1 kernel)
Code:
//JB device source to device/asus/tf201
$ mkdir -p ~/AOKP/device/asus
$ cd ~/AOKP/device/asus
$ git clone git://github.com/craigacgomez/android_device_asus_tf201.git -b aokp_jb tf201
//JB kernel source to kernel/asus/tf201
$ mkdir -p ~/AOKP/kernel/asus
$ cd ~/AOKP/kernel/asus
$ git clone git://github.com/craigacgomez/android_kernel_asus_tf201 -b 10.4.2.15-nvtegra tf201
//JB vendor source to vendor/asus/tf201
$ mkdir -p ~/AOKP/vendor/asus
$ cd ~/AOKP/vendor/asus
$ git clone git://github.com/craigacgomez/vendor_proprietary_asus_tf201 -b jellybean tf201
c. Add tf201 to the vendor & build setup
Code:
$ cd ~/AOKP/vendor/aokp
$ gedit vendorsetup.sh
Add this line vendorsetup.sh below add_lunch_combo aokp_tf101-userdebug
Code:
add_lunch_combo aokp_tf201-userdebug
Code:
$ cd ~/AOKP/vendor/aokp/products
$ gedit AndroidProducts.mk
Add this line vendorsetup.sh below $(LOCAL_DIR)/tf101.mk \
Code:
$(LOCAL_DIR)/tf201.mk \
Code:
$ cd ~/AOKP/vendor/aokp/products
$ touch tf201.mk
$ gedit tf201.mk
Add these line to tf201.mk
Code:
# Inherit device configuration for tf201.
$(call inherit-product, device/asus/tf201/full_tf201.mk)
# Inherit some common AOKP stuff.
$(call inherit-product, vendor/aokp/configs/common_tablet.mk)
$(call inherit-product, vendor/aokp/configs/gsm.mk)
PRODUCT_NAME := aokp_tf201
PRODUCT_DEVICE := tf201
PRODUCT_BRAND := asus
PRODUCT_MODEL := Transformer Prime TF201
PRODUCT_MANUFACTURER := asus
PRODUCT_BUILD_PROP_OVERRIDES += \
PRODUCT_NAME=EeePad \
BUILD_FINGERPRINT="asus/US_epad/EeePad:4.1.1/JRO03C/US_epad-10.4.2.15-20120917:user/release-keys" \
PRIVATE_BUILD_DESC="US_epad-user 4.1.1 JRO03C US_epad-10.4.2.15-20120917 release-keys" \
PRODUCT_COPY_FILES += \
vendor/aokp/prebuilt/bootanimation/bootanimation_1280_800.zip:system/media/bootanimation.zip
d. Resync & build
Code:
$ cd ~/AOKP
$ repo sync -j8
$ . build/envsetup.sh && brunch tf201
Craig, you are so awesome. Thank you so much for all you have done for the community. I hope I can end up with a nexus so I can continue to follow your development, but I'm also glad for the instruction and inspiration to start figuring out how to do more myself. Thanks again.
You're an absolute legend.
I just pressed return to start the build of my first ROM from your previous guide when I saw this..
qubz said:
Your an absolute legend.
Click to expand...
Click to collapse
I'm so sorry if I seem mean... but I just had to do this... I'm a grammar nazi!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
craigacgomez said:
I'm so sorry if I seem mean... but I just had to do this... I'm a grammar nazi!!
Click to expand...
Click to collapse
Ha ha, you got me. It's been a long day. Unfortunately the reply box had no compiler, fix uploaded.
Hey craigacgomez,
thanks for your work.
But I got a problem while trying to build CM10.
Pastebin entry:
http://pastebin.com/st0DfWv4
I'm trying to build it on a server without a gui, what should make no problems. Installed all the requirements you mentioned.
Do you know how to get rid of this error?
Greetz
Chrischdi
chrischdi said:
Hey craigacgomez,
thanks for your work.
But I got a problem while trying to build CM10.
Pastebin entry:
http://pastebin.com/st0DfWv4
I'm trying to build it on a server without a gui, what should make no problems. Installed all the requirements you mentioned.
Do you know how to get rid of this error?
Greetz
Chrischdi
Click to expand...
Click to collapse
libjli.so is a Java binary... somehow it cannot find it... could you try this...
http://serverfault.com/questions/57...ject-file-libjli-so-no-such-file-or-directory
Thanks for this.
I'm hoping to keep your work going , this is a great start
its sad that you no longer have a prime though.
sent from my Prime
Thanks for posting this! You are an absolute legend! It is a massive help as I just started setting up my build environment for compiling my own CM10 and maybe even look at Paranoid :silly:
marko! said:
Thanks for this.
I'm hoping to keep your work going , this is a great start
its sad that you no longer have a prime though.
sent from my Prime
Click to expand...
Click to collapse
gunzy83 said:
Thanks for posting this! You are an absolute legend! It is a massive help as I just started setting up my build environment for compiling my own CM10 and maybe even look at Paranoid :silly:
Click to expand...
Click to collapse
Nice to see people pick up where I left off... to be honest, all I did for this device was the first time for me... I've just been good at modding and I never dug deep into ROM & kernel work before, so I'm pretty sure you guys could do the same or even better!
Hi,
many thanks again Craig for all your work..
I tried to follow your guide for Team Baked, and ended up with::
""build/core/product_config.mk:193: *** _nic.PRODUCTS.[[vendor/baked/products/p5wifi.mk]]: "device/samsung/p5wifi/p5wifi.mk" does not exist. "Stop.
"** Don't have a product spec for: 'baked_tf201'
"** Do you have the right repo manifest?
"
Itried running breakfeast command as suggested but same error.
Anyone has a suggestion ?
Thanks
Striatum_bdr said:
Hi,
many thanks again Craig for all your work..
I tried to follow your guide for Team Baked, and ended up with::
""build/core/product_config.mk:193: *** _nic.PRODUCTS.[[vendor/baked/products/p5wifi.mk]]: "device/samsung/p5wifi/p5wifi.mk" does not exist. "Stop.
"** Don't have a product spec for: 'baked_tf201'
"** Do you have the right repo manifest?
"
Itried running breakfeast command as suggested but same error.
Anyone has a suggestion ?
Thanks
Click to expand...
Click to collapse
Don't run breakfast... just brunch... looks like it has something to do with the p5wifi... try resyncing or comment out that 'add_lunch_combo baked_p5wifi-userdebug' from vendor/baked/vendorsetup.sh
craigacgomez said:
Don't run breakfast... just brunch... looks like it has something to do with the p5wifi... try resyncing or comment out that 'add_lunch_combo baked_p5wifi-userdebug' from vendor/baked/vendorsetup.sh
Click to expand...
Click to collapse
My noob is going to start showing here, but when you say "Comment out" does that simply mean putting brackets around? Does it mean deleting that from the script? I haven't tried to build since your first little guide, but I think I put brackets around what it said to "Comment out."
lortay78 said:
My noob is going to start showing here, but when you say "Comment out" does that simply mean putting brackets around? Does it mean deleting that from the script? I haven't tried to build since your first little guide, but I think I put brackets around what it said to "Comment out."
Click to expand...
Click to collapse
That means out a # at the beginning of the line.
Hi,
Commented out all lines except tf201 in vendorsetup.sh and same error.
Striatum_bdr said:
Hi,
Commented out all lines except tf201 in vendorsetup.sh and same error.
Click to expand...
Click to collapse
Add these lines to the manifest.xml, then repo sync and brunch tf201:
<project path="device/samsung/p4-common" name="device_samsung_p4-common" remote="baked" revision="jb" />
<project path="device/samsung/p5wifi" name="device_samsung_p5wifi" remote="baked" revision="jb" /> :good:
csrabear said:
Add these lines to the manifest.xml, then repo sync and brunch tf201:
<project path="device/samsung/p4-common" name="device_samsung_p4-common" remote="baked" revision="jb" />
<project path="device/samsung/p5wifi" name="device_samsung_p5wifi" remote="baked" revision="jb" /> :good:
Click to expand...
Click to collapse
Great !
It does the trick but... lol
Then error with prebuilts arm toolchain,
/bin/bash: prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.6/bin/arm-linux-androideabi-gcc : binary file impossible to execute
Same error endless. Files are there, permission set to executable...
Is there a way to use arm ubuntu toolchain (easily installed by Synaptic)?
Thanks again
Striatum_bdr said:
Great !
It does the trick but... lol
Then error with prebuilts arm toolchain,
/bin/bash: prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.6/bin/arm-linux-androideabi-gcc : binary file impossible to execute
Same error endless. Files are there, permission set to executable...
Is there a way to use arm ubuntu toolchain (easily installed by Synaptic)?
Thanks again
Click to expand...
Click to collapse
Hi,
Try this thread for answer---
http://www.google.com/url?sa=t&rct=j&q=%2Fbin%2Fbash%3A%20prebuilts%2Fgcc%2Flinux-x86%2Farm%2Farm-linux-androideabi-4.6%2Fbin%2Farm-linux-androideabi-gcc%20%3A%20binary%20file%20impossible%20to%20execute&source=web&cd=1&cad=rja&ved=0CDAQFjAA&url=http%3A%2F%2Fforum.xda-developers.com%2Fshowthread.php%3Ft%3D1762641%26page%3D34&ei=T9KsUOnCMIuK8QS0wYHIAQ&usg=AFQjCNEZuCIRoHJX7_h_34dD3tvmeBbVsQ
or maybe this one will help--
http://www.google.com/url?sa=t&rct=j&q=%2Fbin%2Fbash%3A%20prebuilts%2Fgcc%2Flinux-x86%2Farm%2Farm-linux-androideabi-4.6%2Fbin%2Farm-linux-androideabi-gcc%20%3A%20binary%20file%20impossible%20to%20execute&source=web&cd=2&cad=rja&ved=0CDkQFjAB&url=http%3A%2F%2Fforum.xda-developers.com%2Fshowthread.php%3Ft%3D1807505%26page%3D2&ei=T9KsUOnCMIuK8QS0wYHIAQ&usg=AFQjCNE0FwC2wWy8UE5QHperdU0rI72MKw
csrabear said:
Hi,
Try this thread for answer---
or maybe this one will help--
http://www.google.com/url?sa=t&rct=j&q=%2Fbin%2Fbash%3A%20prebuilts%2Fgcc%2Flinux-x86%2Farm%2Farm-linux-androideabi-4.6%2Fbin%2Farm-linux-androideabi-gcc%20%3A%20binary%20file%20impossible%20to%20execute&source=web&cd=2&cad=rja&ved=0CDkQFjAB&url=http%3A%2F%2Fforum.xda-developers.com%2Fshowthread.php%3Ft%3D1807505%26page%3D2&ei=T9KsUOnCMIuK8QS0wYHIAQ&usg=AFQjCNE0FwC2wWy8UE5QHperdU0rI72MKw
Click to expand...
Click to collapse
Thanks that's what I suspected, I build on a 32bits machine, found 32 arm binaries in the above post.
Will try later. Thanks.
You really need a 64 bit os. Compilation started fine, but a some point gcc sdk binaries are used and again the default paths lead only to 64 bits ones.
I'll install a 64 version if ubuntu.
Thanks guys for you helps
I'm building my first ROM from AOSP/Froyo branch (android-2.2.3_r2) on Ubuntu 12.04 and target 'emulator'.
In 'make' I had to solve several compatibilities that have been popped-up as fatal errors. But for this one:
frameworks/base/libs/utils/RefBase.cpp: In member function ‘void android::RefBase::weakref_type::trackMe(bool, bool)’:
frameworks/base/libs/utils/RefBase.cpp:483:67: error: passing ‘const android::RefBase::weakref_impl’ as ‘this’ argument of ‘void android::RefBase::weakref_impl::trackMe(bool, bool)’ discards qualifiers [-fpermissive]
make: *** [out/debug/host/linux-x86/pr/sim/obj/SHARED_LIBRARIES/libutils_intermediates/RefBase.o] Errorr 1
Click to expand...
Click to collapse
I didn't find any reference so far.
I have tried to relate the issue by editing the file frameworks/base/libs/utils/Android.mk as here
Code:
LOCAL_CFLAGS += -DLIBUTILS_NATIVE=1 $(TOOL_CFLAGS) -fpermissive
but it still doesn't work.
I appreciate your help!
Thanks
HTH others
Opariti said:
I'm building my first ROM from AOSP/Froyo branch (android-2.2.3_r2) on Ubuntu 12.04 and target 'emulator'.
In 'make' I had to solve several compatibilities that have been popped-up as fatal errors. But for this one:
I didn't find any reference so far.
I have tried to relate the issue by editing the file frameworks/base/libs/utils/Android.mk as here
Code:
LOCAL_CFLAGS += -DLIBUTILS_NATIVE=1 $(TOOL_CFLAGS) -fpermissive
but it still doesn't work.
I appreciate your help!
Thanks
Click to expand...
Click to collapse
EDITED:
I reply to myself because I've found the solution: everything is a matter of exactly following the toolchain and dev environment that is recommended by Android for each version.
As I'm using an upgraded Ubuntu system the solution is either to take the source code file by file and update to the new build tools or to downgrade the tools to the original ones. The first solution may take some months work, therefore, in my case, I've just done the following and eventually got a clean Froyo from source (which can be customized, of course):
$ sudo apt-get update
$ sudo apt-get install sun-java5-jdk
$ sudo update-alternatives --config javac (and select the 1.5 version)
$ sudo update-alternatives --config java (and select the 1.5 version)
install gcc-4.4 and g++-4.4, if they are not installed
$ apt-get install gcc-4.4
$ apt-get install g++-4.4
$ mkdir ~/bin, then
$ cd bin
$ ln -s /usr/bin/gcc-4.4 gcc
$ ln -s /usr/bin/g++-4.4 g++
Click to expand...
Click to collapse
Hi everyone!
I'm trying to build LineageOS 15.1 for my Samsung Galaxy S5 - klte. Everything is good until I start compiling and then the build fails with an error "ninja failed with: exit status 1".
I've gone through the output from the build, but I can't find anything that sticks out. I also have tried Googling the problem, but I can't find anything that matches my problem. Here are my build steps:
## Create the directories
mkdir -p ~/bin
mkdir -p ~/android/lineage
## Install the repo
curl https://storage.googleapis.com/git-repo-downloads/repo > ~/bin/repo
chmod a+x ~/bin/repo
## Put the ~/bin directory in my path
nano ~/.profile
# set PATH so it includes user's private bin if it exists
if [ -d "$HOME/bin" ] ; then
PATH="$HOME/bin:$PATH"
fi
source ~/.profile
## Initialize the source repository
cd ~/android/lineage
repo init -u https://github.com/LineageOS/android.git -b lineage-15.1
## Download the source code
repo sync -f --force-sync -j8 -c
source build/envsetup.sh
breakfast klte
cd ~/android/lineage/device/samsung/klte
./extract-files.sh
cd ~/android/lineage
export USE_CCACHE=1
./prebuilts/sdk/tools/jack-admin kill-server
export JACK_SERVER_VM_ARGUMENTS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx15g"
./prebuilts/sdk/tools/jack-admin start-server
## Prepare the device-specific code
source build/envsetup.sh
breakfast klte
## Start the build
croot
brunch klte
Here is a link for the output from the build:
http://www.ohsmeg.com/bill/projects/android/lineageos/ninja_error.html
My build machine is an i7-950 with 16gb of memory, running Ubuntu 16.04 headless.
Any suggestions?
Thanks!
zog